Baby hair clipper Manual · How to trim the hair with the barber comb Baby hair clipper 1.take off...
Transcript of Baby hair clipper Manual · How to trim the hair with the barber comb Baby hair clipper 1.take off...
Fitting for modelTC-830 TC-800
1 2 3 4
Antistatic cape
ON/OFF Switch
Baby hair clipper How to trim the hair with the barber comb
1.take off the guide comb firstly 2.using the barber comb or finger to lift the hair ( as pic. shows)3.left the unwanted hair above the barber comb or finger4.comb the hair in time, to clean up the unwanted hair
Warn! be care of the sharp blade! it will probably hurt the people when trim round the ear .Avoiding any accident, please be care of the cutting edge, and avoid to touch the ear . Or you can cover the ear by hand .
Method of Cleaning
Method of fixing /taking off the guide comb
there are two slots on both side of the "head part",posit the comb in the right place, and push it until you hear the "click" sound ( please make sure the guide comb will not loose or drop off )
Method of fixing the guide comb
push out two "ear " of the guide comb( please do not push the "comb " part , it will damage the comb )
Method of taking off the guide comb
Specification
profuct name : professional pet hair trimmer
model no.: TC-830 TC-800
Adapter: Input: AC 100-240V 50-60 HZ Output: DC 5.0V
battery capacity : 3.7v 650mAH
battery type: lithium battery
charging time: 1 hours
operating time : about 120minutes
how to operate the hair clipper with the adapter plugged
Method of charging
Method of charging
1. put the cord into the charging pin of the hair clipper 2. make sure the switch is in the OFF positon, then get the adapter plugged3. the charging indicating light will start to glitter with red light, when it turns to green, the machine is fully charged4. Unplug the cord , and turn on the switch for operation
Notice of charging
1. 5℃-40℃is the best temperature for charging 2. charging time is about 1 hour 3. only when there is no or few battery ,the battery need to be charged
please make sure the hair clipper is fully charged for your first time use
this product is only used for cutting the hair ,other usage is not allowed cutting the colored or wet hair is not allowed
how to operate the hair clipper with the adapter plugged
1. put the charging pin into the hair clipper 2. make sure the switch is in the OFF position, and make the adapter plugged 3. turn on the hair clipper and start to use
Name of Accessory
blade
main body
ON/OFF Switch adapter
charging indicating light
cord
Accesory
Guide comb 3/6mm
Guide comb 9/12mm
Cleaning brush Oil bottle
Push the blade out of the hair clipper with your thumb ( as picture shows) Push the blade bridge , make some space between the cutting blade and comb blade, and clean up all the hair there with the brush. ( please never disassemble the spring out of the blade. it might cause the malfunction)After cleaning,drop 2 or 3 oil on the blade,and put the blade back to the hair clipper(please make sure,you hear the "Click"sound,it means the blade is fixed back successfully)
Attention
it is common that the machine getting warm when the battery is under charging
Product Name
Model No
Manufacture No
Purchase Date
Baby Hair Clipper
TC-830 TC-800
Date Month Year
Guarantee Time
terminal time : Day Month Year
Customer
One year from purchase date
seller
Address
Address
ProductName
Name
Phone No
Name
Phone No
Guarantee
1. This products is strictly tested and inspected by QC in the factory 2. Malfuction caused by regular use can be guaranteed for 1 year free servicein our shop /store /fixing center (please note : battery only has 6 months guarantee, and the blade is not fitting for this service also ) 3. Among the guarantee time, the following situation need to be charged a) malfunction caused by faulty operation b) malfuncion caused by personal aimed repair or recreation c) malfuncion caused by some natual disaster d) damage or malfunction caused by drop off e) malfuncion caused by local Power f) malfuncion caused by wrong operation without checking this manual4. please show your invoice and guarantee card if you need to repair the product 5. All accessories for repair use will be kept for 3 years
*
* the Lithium battery is sealed inside of the hair clipper , before you throw away the hair clipper, please take out the battery , and store it /them in an environmental place. Manual
How to cut the hair with the guide comb
1. if this is your first time to use this hair clipper, you better to choose the 12mm guide comb, and cut few hair each time. when you're good at it , you can choose other size guide comb for some shorter cutting . 2. hold the hair clipper with the blade facing you ,making the guide comb touch the head skin, and cut slowly and steadly. (pic.1) 3. cut the hair back of the head, need to lower down your head , and use the guide comb 3mm or 6mm or 9mm, start from the center to other suround parts (pic.2) 4.for two side of the head, use the guide comb 3mm or 6mm or 9mm,and cut the hair above or round the ear as the picture shows.
1. please do not disassemble this machine without any professional guidance 2. please keep this machine away from the wet or moisture place
3. please do not clean the machine with gas,alcohol,but some dry fabric can be ok
4. please do not charge the machine lower the 0℃ or higher then 40℃
OIL
Aic
oh
ol
To
lue
ne