BA204 and BA206: Stainless Banding ork 1-888-438-7761 Salem 1-888-880-9191 Los Angeles 1-888-76-193...
3
New York 1-888-438-7761 Salem 1-888-880-9191 Los Angeles 1-888-776-1937 Dallas 1-888-809-5151 Plymouth 1-888-753-7446 Atlanta 1-866-901-0603 BA204 and BA206: Stainless Banding Features: • Stainless Steel banding with fully rounded smooth edges for safety and easy installation • Stamped foot markers • 100’ rolls in dispenser carton • 0.03” thick Part # Size BA204 1/2” x 100’ BA206 3/4” x 100’
Transcript of BA204 and BA206: Stainless Banding ork 1-888-438-7761 Salem 1-888-880-9191 Los Angeles 1-888-76-193...
New York1-888-438-7761
Salem1-888-880-9191
Los Angeles1-888-776-1937
Dallas 1-888-809-5151
Plymouth 1-888-753-7446
Atlanta1-866-901-0603
BA204 and BA206: Stainless Banding
Features: • Stainless Steel banding with fully rounded smooth edges for safety
and easy installation• Stamped foot markers• 100’ rolls in dispenser carton• 0.03” thick
Part # Size
BA204 1/2” x 100’
BA206 3/4” x 100’
New York1-888-438-7761
Salem1-888-880-9191
Los Angeles1-888-776-1937
Dallas 1-888-809-5151
Plymouth 1-888-753-7446
Atlanta1-866-901-0603
BA204: Stainless Banding
It Straps On, Inc.74525 Oil Row
Covington, LA 70435PH: (985) 875-0080 FX: (985) 875-0088
www.itstrapson.com
Specification Sheet for BA204
We test all of our Type 201 stainless steel banding to warrant that it meets ASTM-A666 standards including, but not limited to, chemical composition requirements of carbon, manganese, phosphorus, sulfur, silicon, chromium, and nickel and the tensile and break strengths.
Our stainless steel band is produced and manufactured in the U.S.A .
Unique quality control : Each coil of band is stamped with a 4 digit code every 12 inches referencing the test results and verifying its authenticity and compliance with ASTM standards as well as serving as a handy measurement point. This process is unique to ISO.Our BA204 Type 201 stainless steel banding is fully annealed and is further described as:
Edging: skived
Finish: stainless bright or matte
Thickness: .030”
Width: 1/2”
Length: 100’
Break Strength: 1425 psi, min.
Tensile Strength: 95,000 psi, min.
New York1-888-438-7761
Salem1-888-880-9191
Los Angeles1-888-776-1937
Dallas 1-888-809-5151
Plymouth 1-888-753-7446
Atlanta1-866-901-0603
BA206: Stainless Banding
It Straps On, Inc.74525 Oil Row
Covington, LA 70435PH: (985) 875-0080 FX: (985) 875-0088
www.itstrapson.com
Specification Sheet for BA206
We test all of our Type 201 stainless steel banding to warrant that it meets ASTM-A666 standards including, but not limited to, chemical composition requirements of carbon, manganese, phosphorus, sulfur, silicon, chromium, and nickel and the tensile and break strengths.
Our stainless steel band is produced and manufactured in the U.S.A .
Unique quality control : Each coil of band is stamped with a 4 digit code every 12 inches referencing the test results and verifying its authenticity and compliance with ASTM standards as well as serving as a handy measurement point. This process is unique to ISO.Our BA206 Type 201 stainless steel banding is fully annealed and is further described as:
Edging: skived
Finish: stainless bright or matte
Thickness: .030”
Width: 3/4”
Length: 100’
Break Strength: 2138 psi, min.
Tensile Strength: 95,000 psi, min.
