B SERIES - Dane Desin B Series - Dane Designabs-abs.com/hardwarePages/Color_Catalog/Falcon_C.pdf ·...

ABS-AMERICAN BUILDING SUPPLY, INC.ABS-AMERICAN BUILDING SUPPLY, INC.

2/18 American Building Supply, Inc. 1

FalconB Series - Dane Design

4/24/06Falcon

ABS - AMERICAN BUILDING SUPPLY, INC.

FALCONB SERIES - Dane Design

With Schlage C Keyway With I.C. Less Core

Features:Door Thickness 1-3/8" to 2" standard.Backset 2-3/4" BS standard, available 2-3/8" BS.Specifications Trim has heavy duty springs for lever return. Trim is through-bolted with screws coated

with thread sealant to provide strength & resistance to loosening.Keyways Available Schlage C or I.C. less core.Trim Roses are 3-1/2" diameterStrike 4-7/8" x 1-1/4" ANSI strike standardANSI / BHMA A156.2, series 4000 grade 2UL 1-1/2 hour B label

Factory No. Description ANSI No. / Grade

B101 Passage F75-2Latch bolt by lever at all times

B301 Privacy F76-2Latch bolt by levers outside lever locked by push button in inside lever.Rotating inside lever or closing door releases push button. Emergencyrelease in outside lever unlocks door.

B511 Entry F109-2Turn/push button locking. Pushing and turning button locks outside leverrequiring use of key until button is manually unlocked. Push button locking.pushing button locks outside lever until unlocked by key or by rotating insidelever. Inside lever always free.

B561 Classroom F84-2Deadlocking latch bolt by levers. Outside lever is locked by key in outsidelever. Inside lever is always free.

B581 Storeroom F86-2Deadlocking latch bolt by lever inside or key outside. Outside lever isrigid. Inside lever is always free.

Features:• Door Thickness 1-3/8” to 2” standard.• Backset 2-3/4” BS standard, available 2-3/8” BS.• Specifications Trim has heavy duty springs for lever return.

Trim is through-bolted with screws coated with thread sealant to provide strength & resistance to loosening.• Keyways Available Schlage C or I.C. less core.• Trim Roses are 3-1/2” diameter• Strike 4-7/8” x 1-1/4” ANSI strike standard• ANSI / BHMA A156.2, series 4000 grade 2• UL 1-1/2 hour B label

Options• 2 3/8” Bacsket Specify A57420 (SL), A57620 (PL), A57420D (DL)• 5065 “T” Strike

Stocked ProductFinish 626B101 Schlage C KeywayB301 Schlage C KeywayB511 Schlage C Keyway or Best prep I. C. core less coreB581 Schlage C Keyway or Best prep I. C. core less core

FUNCTIONS ANSI


2 American Building Supply, Inc. 2/18

FunctionsD100-Series

D111P E0171 Classroom FunctionDeadbolt thrown or retracted by key fromoutside. Inside turn will only retract bolt. Boltautomatically deadlocks when fully thrown.

D121P E0161 Single Cylinder x RoseDeadbolt thrown or retracted by key only. Blankplate inside. Bolt automatically deadlocks whenfully thrown.

D131P E2141 Double Cylinder*Deadbolt thrown or retracted by key from eitherside. Bolt automatically deadlocks when fullythrown.

D141P E2151 Single Cylinder x TurnDeadbolt thrown or retracted by key or by turn.Bolt automatically deadlocks when fully thrown.

BHMA / ANSI A156.5, 2001, Grade 1Bored Deadbolt Locks

FALCON ANSI &GRADE

* CAUTION: Double cylinder locks on residences and anydoor, in any structure, which is used for egress are a lifesafety hazard in times of emergency and their use is notrecommended. Installation should be in accordance withexisting codes only.

Finish Codes and DescriptionsCode Description605 (US3) Bright Brass606 (US4) Satin Brass613 (US10B) Oil Rubbed Bronze625 (US26) Bright Chrome626 (US26D) Satin Chrome

D200 Series


E0162 Single Cylinder x RoseDeadbolt thrown or retracted by key only. Blankplate inside. Bolt automatically deadlocks whenfully thrown.



D261 E2192 Thumbturn, Inside OnlyDeadbolt thrown or retracted by turn unit only.No outside trim. Bolt automatically deadlockswhen fully thrown.

D261M E01112 Thumbturn, Inside x RoseDeadbolt thrown or retracted by turn unit only.Outside blank rose. Bolt automaticallydeadlocks when fully thrown.

D271 Thumbturn xOccupancy IndicatorDeadbolt thrown or retracted by turn unit only.Occupancy indicator on outside (reads either inuse or vacant with color coding). Boltautomatically deadlocks when fully thrown.


FALCON ANSI &GRADE

D100 / D200 Series Pricing Sheet

Standard Features*Certification Grade 1 BHMA - ANSI A156.5, 2001, Grade 1 auxiliary lock, Available UL Listed for 3-Hour fire door

Grade 2 BHMA - ANSI A156.5, 2001, Grade 2 auxiliary lock, Available UL Listed for 3-Hour fire doorDeadbolt 1-1/8" x 2-1/4", Square corner faceplate, 1" housing diameter, 1" throwStrike 1-1/8" x 2-3/4", lipless, with boxCylinder 6-Pin, Solid brass, Keyed 5-Pin, Falcon G keyway, Keyed different (KD)Door Range 1-3/8" - 1-3/4" standardKeys Two, Nickel silver cut keys per lock, Falcon G keywayReinforcement Metal dust box reinforcer with three - 3" screwsTrim Ring 1" Wrought brass or bronze, reinforced with security insert

* Locks are furnished with standard features unless otherwise specified.

D200 - SeriesThe new D Series deadbolt from Falcon will fit on virtually any door, thanks to an adjustable backset with an innovative lock-in-place design. Available in a Grade 1 or Grade 2 configuration, our new D Series deadbolt can be fitted with virtually any Falcon cylinder, enhances lock strength on the jamb side of the door and is easier to install than any deadbolt you’ve ever worked with.

Find out more at www.falcon.ingersollrand.com

The new D Series deadbolt from Falcon will fit on virtually any door, thanks to

an adjustable backset with an innovative lock-in-place design. Available in a

Grade 1 or Grade 2 configuration, our new D Series deadbolt can be fitted

with virtually any Falcon cylinder, enhances lock strength on the jamb side of

the door and is easier to install than any deadbolt you’ve ever worked with.

It’s simple, really.

Because giving our customers

Safety, Security and Uncompromising Value is what we do best.

Our toughest deadbolt is also the most flexible.

FA-5295 Rev 02/08

Available functions (Exterior x Interior)

• Single cylinder x thumbturn

• Single cylinder x thumbturn - classroom function

• Single cylinder x rose

• No outside trim x thumbturn

• Rose x thumbturn

• Occupancy indicator x thumbturn

• Double cylinder

Security strike on jamb has third screw for deeper anchoring

ADA compliant thumbturn

Heavy duty* saw-resistant bolt with spinning hardened steel pin inside for additional protection* Grade 1 - High Strength Steel Grade 2 - Zinc Integrated anti-pry shield behind

cylinder assembly for added security and quicker installation

Tapered front resists wrenching

Adjustable backset with lock-in-place design for greater versatility

Latch tube constructionIntegrated trim design – fewer pieces out of the box and improved installation time

Accepts all small format interchangable style cores (SFIC) and conventional cylinders

Added space inside strike box for true deadlatch

Improved security strike design

Features:Certification Grade 1 BHMA - ANSI A156.5, 2001, Grade 1 auxiliary lock, Available UL Listed for 3-Hour fire door Grade 2 BHMA - ANSI A156.5, 2001, Grade 2 auxiliary lock, Available UL Listed for 3-Hour fire doorDeadbolt 1-1/8” x 2-1/4”, Square corner faceplate, 1” housing diameter, 1” throwStrike 1-1/8” x 2-3/4”, lipless, with boxDoor Range 1-3/8” - 1-3/4” standardReinforcement Metal dust box reinforcer with three - 3” screwsTrim Ring 1” Wrought brass or bronze, reinforced with security insertBackset 2-3/8” and 2-3/4” adjustable

Falcon







FALCON ANSI &GRADE



D200 Series









FALCON ANSI &GRADE











FALCON ANSI &GRADE



D200 Series









FALCON ANSI &GRADE





D231 Double CylinderDeadbolt thrown or retracted by key from either side. Bolt automatically deadlocks when fully thrown.

D241 Single Cylinder x TurnDeadbolt thrown or retracted by key or by turn. Bolt automatically deadlocks when fully thrown.

D271 Thumbturn x Occupancy IndicatorDeadbolt thrown or retracted by turn unit only. Occupancy indicator on outside (reads either in use or vacant with color coding). Bolt automatically deadlocks when fully thrown.

Stocked ProductFinish......626Keyway ...Schlage C, I.C. Core less Core

Stocked ProductFinish......613, 626Keyway ...Schlage C, I.C. Core less Core

Stocked ProductFinish......613, 626Indicator Key 61-509



Falcon - Heavy Duty LeversMA - SeriesFeatures:Door thickness: Standard accommodates thickness of 1-3/4” to 2-1/4”.

Backset: 2-3/4” only.

Case: Cold formed steel, zinc dichromate plated, .090” thick. Optional lead wrapping available.

Hubs: Hardened steel.

Handing: Right hand is standard; left hand optional. Reversible in the field.

Cylinders: Furnished with Schlage “C” key way . IC cylinders available as an option

Bind Resistant Trim: Heavy-duty through-bolted inserts clamp the trim on the door assuring proper alignment. Designed to bottom out on 1-3/4” doors to prevent door collapse. Provided with 10-32 screws for strength and thread sealant to prevent loosening.

Latch Bolt: Two-piece brass, mechanical anti-friction bolt. 3/4” projection.

Dead Bolt: 1” throw, brass with a 1/4” thick hardened steel, freeturning, saw-resistant roller.

Faceplates: (Armored Front) 1-1/4” x 8” brass, bronze and stainless steel adjustable for door bevel. Rein-forced by heavy gauge steel with stabilizing ribs.

Strike: Brass, bronze or stainless steel. Meets ANSI AII5.1 for frame preparation. Strike is handed. Optional 1-1/8 lip-to-center reversible flat lip available.

ANSI/BHMA: Meets ANSI/BHMA 156.13, Series 1000. UL: 3 hour A label.

Warranty: 10 Year Limited

M S E R I E SH E AV Y D U T Y L E V E R S

5

Cast or forged levers (Avalon, Dane and Quantum) and wrought brass, bronze or stainless levers (Kim and Sutro), wrought rose and wrought escutcheons are standard. Sutro is a solid lever, Kim is hollow.

Levers

Avalon Dane Kim Quantum Sutro

Rose Gala AG DG KG QG SG

Escutcheon Napa AN DN KN QN SN

Heavy Duty Lever Trim (LM)

Heavy Duty Lever Combinations

QGQuantum-Gala

SGSutro-Gala

KGKim-Gala

29/16"

43/4"

3"2-9/16”

4-3/4"

3"

29/16"

2-9/16”

4-7/8"

3"

2-9/16”

4-7/8"

3"

29/16"

41/2"

27/8"2-9/16”

4-1/2"

2-7/8"

41/2"

21/2"29/16"2-9/16”

4-1/2"

2-1/2"

8-1/4”

2-1/2"

2-3/8"

4-1/2”

M S E R I E SH E AV Y D U T Y L E V E R S ( C O N T I N U E D )

AGAvalon-Gala

DGDane-Gala

DNDane-Napa

6

29/16"

41/2"

27/8"2-9/16”

4-1/2"

2-7/8"

41/2"

21/2"29/16"2-9/16”

4-1/2"

2-1/2"

8-1/4”

2-1/2"

2-3/8"

4-1/2”


AGAvalon-Gala

DGDane-Gala

DNDane-Napa

6

DESIGNS

Stocked ProductFinish: 626

29/16"

41/2"

27/8"2-9/16”

4-1/2"

2-7/8"

41/2"

21/2"29/16"2-9/16”

4-1/2"

2-1/2"

8-1/4”

2-1/2"

2-3/8"

4-1/2”


AGAvalon-Gala

DGDane-Gala

DNDane-Napa

6



Falcon - Heavy Duty LeversMA - Series

M S E R I E SO p t i o n s a n d A c c e s s o r i e sM S E R I E SF U N C T I O N S

11

To order Falcon M Series locksets, please consult page 19 for ordering information and assistance.

Indicates interchangeable core available.

Catalog Number Prefixes: Add the following prefix for the appropriate trim style.

MM (example: MM521) = Knob Trim LM (example: LM521) = Lever Trim

Note: If a special function is required and not listed here, please contact the factory for assistance.

Catalog Number

Function DescriptionANSI No. & Grade

M101 Passage/Closet Latchset Latch bolt by knobs/levers at all times.F01-1 F01-2

M161 Connecting Room/Exit Latch Deadlocking latch bolt by inside knob/lever. Non-removable blank plate outside.

M301Privacy Lock Latch bolt by knobs/levers, dead bolt by turn inside or emergency key (012727-000-30) outside furnished with lock.

F02-1 F02-2

M311Privacy, Bedroom or Bath Lock Latch bolt by knobs/levers. Dead bolt by turn from inside and emergency key (012727-000-30) outside furnished with lock.Rotating inside knob/lever retracts both bolts.

F19-1 F19-2

M321

Privacy Lock Latch bolt operated by knob/lever from either side except when outside knob/lever is locked by inside T-turn. Operating inside knob/lever, closing door or operating outside emergency release unlocks outside knob/lever. Emergency key (012727-000-30) furnished with lock.

F22-1 F22-2

M371 Store Door Lock Latch bolt by knobs/levers. Dead bolt by key from either side.F14-1 F14-2

M381Entry/Restroom Lock Deadlocking latch bolt by knobs/levers except when outside knob/lever is locked by key inside, then by key outside.

F09-1 F09-2

M411 Asylum Lock Deadlocking latch bolt by key from either side. Both knobs/levers rigid.

M431

Classroom Security Lock with Deadbolt Latch bolt retracted by knob/lever from either side, except when outside lever is locked; latch bolt then retracted by key outside or key or rotating lever inside. Deadbolt thrown or retracted by key either side, or by rotating lever inside.

M441Classroom Security Lock Latch bolt retracted by knob/lever from either side, except when outside lever is locked; latch bolt then retracted by key outside or inside, or by rotating lever inside.

M S E R I E SO p t i o n s a n d A c c e s s o r i e sM S E R I E SF U N C T I O N S

11

To order Falcon M Series locksets, please consult page 19 for ordering information and assistance.


Catalog Number Prefixes: Add the following prefix for the appropriate trim style.

MM (example: MM521) = Knob Trim LM (example: LM521) = Lever Trim

Note: If a special function is required and not listed here, please contact the factory for assistance.

Catalog Number


M101 Passage/Closet Latchset Latch bolt by knobs/levers at all times.F01-1 F01-2

M161 Connecting Room/Exit Latch Deadlocking latch bolt by inside knob/lever. Non-removable blank plate outside.

M301Privacy Lock Latch bolt by knobs/levers, dead bolt by turn inside or emergency key (012727-000-30) outside furnished with lock.

F02-1 F02-2

M311Privacy, Bedroom or Bath Lock Latch bolt by knobs/levers. Dead bolt by turn from inside and emergency key (012727-000-30) outside furnished with lock.Rotating inside knob/lever retracts both bolts.

F19-1 F19-2

M321

Privacy Lock Latch bolt operated by knob/lever from either side except when outside knob/lever is locked by inside T-turn. Operating inside knob/lever, closing door or operating outside emergency release unlocks outside knob/lever. Emergency key (012727-000-30) furnished with lock.

F22-1 F22-2

M371 Store Door Lock Latch bolt by knobs/levers. Dead bolt by key from either side.F14-1 F14-2

M381Entry/Restroom Lock Deadlocking latch bolt by knobs/levers except when outside knob/lever is locked by key inside, then by key outside.

F09-1 F09-2

M411 Asylum Lock Deadlocking latch bolt by key from either side. Both knobs/levers rigid.

M431

Classroom Security Lock with Deadbolt Latch bolt retracted by knob/lever from either side, except when outside lever is locked; latch bolt then retracted by key outside or key or rotating lever inside. Deadbolt thrown or retracted by key either side, or by rotating lever inside.

M441Classroom Security Lock Latch bolt retracted by knob/lever from either side, except when outside lever is locked; latch bolt then retracted by key outside or inside, or by rotating lever inside.

M S E R I E SF u n c t i o n s

Catalog Number


M451

Hotel/Motel Lock Deadlocking latch bolt by inside knob/lever or key outside. Outside knob/lever rigid.Dead bolt by turn inside or emergency key outside. Projecting dead bolt displays occupancy indicator and shuts out all keys except emergency. Rotating inside knob/lever retracts both bolts.

F15-1 F15-2

M521Entry/Office Lock Deadlocking latch bolt by knobs/levers except when outside knob/lever is locked by buttons in face, then by key outside.

F04-1 F04-2

M531Entry/Office Lock Latch bolt by knobs/levers except when outside knob/lever is made inoperative by buttons in face. Dead bolt by key outside and turn inside. Rotating inside knob/lever retracts both bolts. Deadlocking latch.

F10-1, F10-2 F12-1, F12-2 F20-1, F20-2

M541Entry/Office Lock Latch bolt by knobs/levers. Dead bolt by key outside or turn inside.

F21-1 F21-2

M561Classroom Lock Deadlocking latch bolt by knobs/levers. Outside knob/lever locked by key outside. Inside knob/lever always free.

F05-1 F05-2

M571Dormitory Lock Latch bolt by knobs/levers except when outside knob/lever is locked by projecting dead bolt. Key outside retracts dead bolt and unlocks outside knob/lever. Rotating inside knob/lever retracts both bolts.

F13-1 F13-2

M581Storeroom Lock/Exit Lock Deadlocking latch bolt by inside knob/lever or key outside. Outside knob/lever rigid.

F07-1 F07-2

M621Front Door Lock Latch bolt is operated by knob/lever from either side except when outside knob/lever is made inoperative by a stop or mechanical means other than key, Dead bolt is operated by turn inside. Key outside operates bolt bolts.

F08-1 F08-2

M641Dormitory Lock Latch bolt by knob/lever inside and key outside. Inside knob/lever free. Outside knob/lever rigid. Dead bolt by key outside or T-turn inside. Rotating inside knob/lever retracts both bolts. Deadlocking latch.

M711

Privacy Lock (Special) Latch bolt operated by key from outside or by operating inside knob/lever. Outside knob/lever is always in operative. Dead bolt operated by T-turn inside or emergency release outside. Key outside does not operate dead bolt. Operating inside knob/lever retracts both bolts. Deadlocking latch.

M S E R I E SF U N C T I O N S ( C O N T I N U E D )

12



Catalog Number


M451


F15-1 F15-2


F04-1 F04-2


F10-1, F10-2 F12-1, F12-2 F20-1, F20-2


F21-1 F21-2


F05-1 F05-2


F13-1 F13-2


F07-1 F07-2


F08-1 F08-2


M711



12



Catalog Number


M451


F15-1 F15-2


F04-1 F04-2


F10-1, F10-2 F12-1, F12-2 F20-1, F20-2


F21-1 F21-2


F05-1 F05-2


F13-1 F13-2


F07-1 F07-2


F08-1 F08-2


M711



12


FUNCTIONS

Cylinder Guards*

Falcon offers two different types of cylinder guards in various thicknesses to work with sectional or escutcheon trim, different door ranges and various cylinder lengths. Our standard cylinder, 985, is 1-1/8” long. The factory will furnish the correct cam(s) and cylinder guard for the function and door thickness specified. The A08790 and A08794 cylinder guards in bar stock brass are available to accommodate different cylinder lengths and door thicknesses as shown.

985 Cylinder withA08790 Cylinder Guard.

985 Cylinder withA08794 Cylinder Guard.

A08790 A08794

Cylinder Guard Application Chart**

Door Thickness 985 1-1/8” (cyl.) 986 1-1/4” (cyl.) 987 1-3/8” (cyl.) 988 1-1/2” (cyl.)

1-1/2” A08794-001 (13/32”) A08794-002 (17/32”)

1-3/4” A08794-000(9/32”) A08794-001 (13/32”) A08794-002 (17/32”)

2” A08794-000 (9/32”) A08794-001 (13/32”) A08794-002 (17/32”)

2-1/4” A08794-000 (9/32”) A08794-001 (13/32”)

2-1/2” A08794-000 (9/32”)Note: Dimensions listed for A08794 also apply to A08790.** Cylinder guards measure 3/16” from shoulder to top. A wavy spring washer is furnished with either cylinder guard.** Single cylinder functions.

Thumb Turn/Threaded CylindersStandard thumb turn threaded cylinders for dead bolt operation of M Series locks may be used in lieu of surface mounted thumb turns. Furnished with A09894-1 cam. Available in length indicated and all M Series finishes.Thumb turn cylinders for inside of M911 function are handed.

Catalog Number Length

986-T 1-1/4”

9731-1/8” RH (Turns counter-clockwise)

9741-1/8” LH (Turns clockwise)

M S E R I E SF u n c t i o n s ( c o n t i n u e d )M S E R I E SC Y L I N D E R G UA R D S A N D T H U M B T U R N S

16

Cylinder Guards

Cylinder Guard Application Chart**

Door Thickness 985 1-1/8” (cyl.) 986 1-1/4” (cyl.) 987 1-3/8” (cyl.) 988 1-1/2” (cyl.)

1-1/2” A08794-001 (13/32”) A08794-002 (17/32”)

1-3/4” A08794-000(9/32”) A08794-001 (13/32”) A08794-002 (17/32”)

2” A08794-000 (9/32”) A08794-001 (13/32”) A08794-002 (17/32”)

2-1/4” A08794-000 (9/32”) A08794-001 (13/32”)

2-1/2” A08794-000 (9/32”)

Note: Dimensions listed for A08794 also apply to A08790.

** Cylinder guards measure 3/16” from shoulder to top. A wavy spring washer is furnished with either cylinder guard.

** Single cylinder functions.

Stocked ProductA08790/ A08794 - 000 9/32” - 001 13/32” - 002 17/32”626 finish

ANSI

MA101

MA311

MA531

MA561

MA581



Falcon - Heavy Duty LeversT - SeriesFeatures:Door Thickness: 1-3/4” to 2-1/8” standard. Thin door adapter kit (A30775-000-00) available for doors thinner than 1-3/4”, please specify door thickness. Special Order

Backset: 2-3/4” standard. 2-3/8” also available. Link (A22161-005-10) available for 5” backset. 5” backset Special Order

Mechanism: Parts constructed of brass or cold formed steel, zinc plated and dichromated for rust resistance. Springs are stainless steel.

Attachment: Lock chassis secured to door by threaded mounting nuts. Completely preassembled outer trim and inner spindle assembly are through-bolted over chassis using (2) 10-32 screws. Adding rose and lever to inner spindle assembly completes installation.

Handing: Locks are non-handed.

Cylinders: Furnished with Schlage “C” keyway and IC prep options.

Trim: Roses are heavy wrought brass or bronze, installed over pressure cast rose inserts which are through-bolted through door. Levers are pressure cast (solid levers–no inserts) material finished to match mating parts.

Latches: 9/16” bolt projection, UL listed with latch faceplates 2-1/4” x 1-1/8” with square corners standard. 3/4” projection, UL listed latch with 2-3/4” backset also available. Adjustable front standard.

Strikes: 4-7/8” x 1-1/4” ANSI strike with curved lip to meet ANSI A115.2 door frame preparation standard.

Screws: Furnished with combination screws for use in wood or metal doors and frames.

Electrified Functions: Available in 24 VDC .185 AMP.

ANSI/BHMA: Meets ANSI/BHMA A156.2, Series 4000, Grade 1.

UL: 3 hour A label.

Warranty: 10 Year Limited

Stocked ProductDesign ........... Dane, QuantumFinish ............ 626, (613 Dane SCH “C” Only)Keyway .......... Schlage C, (IC)Backset ......... 2-3/4” Standard, also available 2-3/8”

14

T S E R I E SLO C K F E AT U R E S A N D S P E C I F I C AT I O N S

Lock FeaturesDoor Thickness: 1-3/4” to 2-1/8” standard. Thin door adapter kit (A30775-000-00) available for doors thinner than 1-3/4”, please specify door thickness.Backset: 2-3/4” standard. 2-3/8” also available. Link (A22161-005-10) available for 5” backset.Mechanism: Parts constructed of brass or cold formed steel, zinc plated and dichromated for rust resistance. Springs are stainless steel. Attachment: Lock chassis secured to door by threaded mounting nuts. Completely preassembled outer trim and inner spindle assembly are through-bolted over chassis using (2) 10-32 screws. Adding rose and lever to inner spindle assembly completes installation.Handing: Locks are non-handed.Cylinders: Drilled with 6-pin chambers, pinned in 5. Pinning in 6 chambers available when specified, at no cost. 7-pin cylinders also available. Cylinder assemblies removable to rekey. Also available with 6 or 7-pin interchangeable core cylinders. Cylinder housings and plugs machined from solid brass. Springs are phosphor bronze. Two nickel silver keys furnished standard. Interchangeable core design is available for small format (SFIC) and large format for most manufacturers, see page 8.

Falcon Lock T Series SpecificationsKey-in-lever cylindrical locksets shall be Falcon Lock T Series or equal and meet the following requirements:• All locks shall meet the new ANSI/BHMA A156.2, Series 4000,

Grade 1 for key-in-lever locksets.• Locksets shall be UL Listed (3 hour A Label).• Locksets shall be provided standard with Pressure Release™

feature. When outside lever is locked, it is not rigid but will move freely without operating the latch bolt.

• Lever trim shall have individual heavy-duty compression springs behind rose for lever return and to prevent lever sag. Trim shall be through-bolted with two (2) 10-32 screws coated with thread sealant to provide strength and resistance to loosening. Inner

Elevation Standard StrikeDoor Edge

Keyways: “G” keyway standard on conventional cylinders. “A” keyway standard on I/C core cylinders. Also available with some optional keyways.Trim: Roses are heavy wrought brass or bronze, installed over pressure cast rose inserts which are through-bolted through door. Levers are pressure cast (solid levers–no inserts) material finished to match mating parts. Latches: 9/16” bolt projection, UL listed with latch faceplates 2-1/4” x 1-1/8” with square corners standard. 3/4” projection, UL listed latch with 2-3/4” backset also available. Adjustable front standard. See page 10 for optional latches.Strikes: 4-7/8” x 1-1/4” ANSI strike with curved lip to meet ANSI A115.2 door frame preparation standard. Consult page 11 for other available strike sizes and configurations.Screws: Furnished with combination screws for use in wood or metal doors and frames.Electrified Functions: Available in 24 VDC .185 AMP.ANSI/BHMA: Meets ANSI/BHMA A156.2, Series 4000, Grade 1.UL: 3 hour A label.

and outer trim shall “bottom out” to prevent door collapse. Roses shall be minimum of 3-1/2” diameter.

• All lever designs shall be solid and meet the federal ADA and state disability requirements. Inside levers shall be attached by Allen-head set screw to prevent tampering or vandalism.• Locksets shall adjust to fit door thickness from 1-3/4” to 2-

1/8”.• All locksets shall be non-handed and not require field

disassembly for re-handing.• Preparation for door must be non-handed.Acceptable manufacturer: FALCON LOCK

2-3/8”, 2-3/4”5/32”5/16” Dia. thru hole

2-3/4”

5/32” x 1/8” Deep

2-25/32”2-1/8” Dia. 1-1/8”

1-1/8”

2-1/4”

1” Dia. 3/4”

3-3/8”

4-7/8”

1-1/4”

5/16”

3-1/2”

4-1/8”

3/8”9/16”

1-1/16”

CL door, lock & strike are common

Backset (from center of door for beveled stile)



DESIGNS

Falcon - Heavy Duty LeversT - Series

FUNCTIONS

4

T S E R I E SL E V E R D E S I G N S

LeversLevers are solid pressure cast zinc, finished to match mating parts. Roses are wrought brass or bronze installed over steel through-bolted rose inserts. Pressure Release™ levers are standard. Levers are secured by a spring-loaded retainer. Retainer cannot be depressed when locks have been locked.

Abrasive Coated LeversAll levers are available with abrasive coating along the length of the lever to identify entrances to hazardous areas to the handicapped. To order add: “with abrasive coated outer lever” in detail section of order.

AAvalon

QQuantum

5”

3-1/2”

3-1/4”

DDane

5”

3-1/2”

3-1/4”

5”

3-1/2”

3-1/4”

To order Falcon T Series locksets, please consult page 15 for ordering information and assistance.


Catalog Number


T101Passage/Closet Latchset Latch bolt by levers at all times.

F75-1

T301

Privacy Lock Latch bolt by levers. Outside lever locked by push button in inside lever. Rotating inside lever or closing door releases push button. Emergency release in outside lever unlocks door.

F76-1

T351Closet Lock Deadlocking latch bolt by turn knob inside or lever outside except when outside lever is locked by key.

T381

Classroom Security Lock Deadlocking latch bolt by levers from either side except when outside lever is locked by key from inside. Outside key only retracts latch. Outside lever is locked and unlocked only by inside key.

F88-1

T411Asylum Lock Deadlocking latch bolt operated by key in lever from either side. Both levers always inoperable.

F87-1

T501Entry Lock Push button locking. Button on inside locks outside lever until unlocked by key or by rotating inside lever. Inside lever always free. Deadlocking latch bolt.

F82-1

T511

Entry/Office Lock Turn/push button locking. Pushing and turning button locks outside lever requiring use of key until button is manually unlocked. Push button locking. Pushing button locks outside lever until unlocked by key or by rotating inside lever. Inside lever always free. Deadlocking latch bolt.

F109-1

T521Office Lock Turn button locking. Turning button locks outside lever requiring use of key until button is manually unlocked. Inside lever always free. Deadlocking latch bolt.

F81-1

T561Classroom Lock Deadlocking latch bolt by levers. Outside lever is locked by key in outside lever. Inside lever is always free.

F84-1

T S E R I E SF U N C T I O N S

6



Catalog Number



F75-1

T301


F76-1


T381


F88-1


F87-1


F82-1

T511


F109-1


F81-1


F84-1


6



Catalog Number


T571

Dormitory Lock Deadlocking latch bolt by levers except when locked by push button in inside lever. Key in outside lever locks or unlocks outside lever and releases button. Closing door releases push button. Inside lever always free.

F90-1

T581Storeroom Lock Deadlocking latch bolt by lever inside or key outside. Outside lever is inoperable. Inside lever always free.

F86-1

T851

Storeroom (Electrified – Fail Safe) Inside Lever Always Free. Latch bolt operated by lever from either side except when outer lever is electrically locked. When outer lever is locked (inoperable), latch bolt retracted by key in cylinder outside. 24 volt DC .185 Amps, continuous duty.

T881

Storeroom (Electrified – Fail Secure) Inside Lever Always Free. Deadlocking latch bolt operated by lever inside at all times. Outside lever inoperable until electrically unlocked, then latch bolt from either side. When outside lever is inoperable latch bolt retracted by key in cylinder outside. 24 volt DC .185 Amps, continuous duty..

T12Dummy Trim Single Trim-surface mounted rigid lever.

7



Catalog Number



F75-1

T301


F76-1


T381


F88-1


F87-1


F82-1

T511


F109-1


F81-1


F84-1


6



Catalog Number



F75-1

T301


F76-1


T381


F88-1


F87-1


F82-1

T511


F109-1


F81-1


F84-1


6

ANSI



Falcon - Medium Duty LeversW - Series Grade 2 Cylindrical Lever and Knob Locks

Features:• Reliable and proven Grade 2 construction• Heavy duty springs for better lever return and to prevent sagging• Non-handed for easy field assembly• Abrasive lever coating option available• Priced to fit your opening price point• Schlage C Masterkey available• Manufactured to Ingersoll Rand’s industry-leading quality standards

Can be suited with a variety of Falcon locks such as mortise, tubular, grade 1 cylindrical and interconnect.

Lever Styles

Rose Diameters

The Falcon W comes in different rose diameters to meet your customer needs. The Large Rose 3-1/2” diameter and a Small Rose 2 9/16” diam-eter to meet your narrow stile door requirements.

Dane Quantum

Large Rose Small Rose(Only available in Dane Lever)



* W101 Passage latchset—Latch bolt by levers at all times. F75

* W301 Privacy lock—Latch bolt by levers. Outside lever is locked by push button on inside lever.

Entry/of ce lock—Deadlocking latch bolt by levers.Turn/push button locking. Pushing and

Rotating inside lever or closing door releases push button and frees outside lever. Inside lever is always free. Emergency release in outside lever unlocks door.

F76

W501 Entry lock—Push button locking. Button on inside locks outside lever until unlocked by key or by rotating inside lever. Closing door release push button and unlocks door. Inside lever always free. Deadlock latchbolt.

F82

* W511turning button locks outside lever, requiring use of a key for unlocking the door until button is manually unlocked. Pushing button locks outside lever until unlocked by key or by rotating inside lever. Inside lever is always free.

F109

* W561 Classroom lock—Deadlocking latch bolt by levers. Outside lever is locked by key in outside lever. Inside lever is always free.

F84

* W581 Storeroom lock—Deadlocking latch bolt by lever inside or key outside. Outside lever is always locked. Inside lever is always free.

F86

* W12 Single dummy trim—Single trim, surface-mounted rigid lever.

*Available as small rose

56 • Falcon • Locks

FUNCTIONS ANSI

L E V E R S

Levers are solid pressure-cast zinc, finished to match mating parts. Roses are wrought brass or bronze installed over steel through-bolted rose inserts. A spring-loaded retainer secures levers. Secure side retainer cannot be depressed without a key that operates the lock.

Abrasive Lever Options

All levers are available with an abrasive strip along the length of the lever to identify entrances to areas hazardous to the disabled. To order add 6 (for example, 6DA for Dane lever or 6QU for Quantum lever) to the order number.

D A N E

Q U A N T U M

Conventional Cylinder

Small Format Interchangeable Core (SFIC)

Plain

Thumbturn (interior)



Plain


4

L E V E R S

Levers are solid pressure-cast zinc, finished to match mating parts. Roses are wrought brass or bronze installed over steel through-bolted rose inserts. A spring-loaded retainer secures levers. Secure side retainer cannot be depressed without a key that operates the lock.

Abrasive Lever Options

All levers are available with an abrasive strip along the length of the lever to identify entrances to areas hazardous to the disabled. To order add 6 (for example, 6DA for Dane lever or 6QU for Quantum lever) to the order number.

D A N E

Q U A N T U M



Plain




Plain


4

DESIGNS

Falcon - Medium Duty LeversW - Series

Stocked Product

Dane Quantum

Design Keyway FinishDane: Schlage C, IC core stocked 626 605, 613, 625, 626Quantum: Schlage C 626, 613

Backset2-3/4” Standard, also available 2-3/8”

Small Rose - stockedOnly available in Dane Lever



Falcon - LatchesB - Series

P/W DESCRIPTION FINISH

A57420 SL, 2-3/8”BS, 1”Face Plate 626A57420D DL, 2-3/8”BS, 1”Face Plate 626A57435 SL, 2-3/4”BS, 1-1/8”Face Plate 626A57435D SL, 2-3/4”BS, 1-1/8”Face Plate 626A57620 SL, 2-3/6”BS, 1” Face Plate F/301 626

D200 - SeriesP/W DESCRIPTION FINISH

Q330-253 ADJ, Square Corner, 1-1/8” x 2-1/4” FP 613, 626

T - Series

W - SeriesP/W DESCRIPTION FINISH

Q330197 DL, 2-3/4”BS, 1-1/8”Face Plate 605, 613, 626Q330201 DL, 2-3/8”BS, 1”Face Plate 613, 626Q330203 DL, 2-3/8”BS, 1-1/8”Face Plate 613, 626Q330206 SL, 2-3/4”BS, 1-1/8”Face Plate 605, 613, 626Q330207 SL, 2-3/8”BS, 1”Face Plate 613, 626Q330209 SL, 2-3/8”BS, 1-1/8”Face Plate 613, 626

Stocked Product

Stocked Product

Stocked Product

P/W DESCRIPTION FINISH

23981111 SL, 2-3/8” BS, 1” Face Plate 613, 62623981137 SL, 2-3/4” BS, 1-1/8” Face Plate 613, 62623981160 DL, 2-3/8” BS, 1” Face Plate 613, 62623981145 DL, 2-3/4” BS, 1-1/8” Face Plate 613, 626

Stocked Product



Falcon - Cylinders & Keys

4/24/06FalconPage 7


FALCON - Cylinders & Keys

Interchangeable Standard IC core uses a single spring cover.Core Stocked uncombinated without pins, springs, or keys.

Stock keyways A & BNote C606ACC does not inlcude control & operating keys

PART NO. DESCRIPTION FINISH LIST PRICE9FALKB5776 KEY BLANK, STANDARD G KEYWAY N/A $ 1.20

9FALKB628A KEY BLANK, A KEYWAY I.C. N/A $ 1.40

9FALKB628B KEY BLANK, B KEYWAY I.C. N/A $ 1.40

008

PART NO. DESCRIPTION FINISH LIST PRICE9FALC646A626 UNCOMBINATED CORE, A KEY WAY 6 PIN 626 $ 18.30

9FALC646B626 UNCOMBINATED CORE, B KEY WAY 6 PIN 626 $ 18.30

9FALC607A626 COMBINATED CYLINDER A KEYWAY 7 PIN 626 $ 31.50

9FALC606ACC TEMPORARY CORE BLACK $ 14.00

9FALKB6322A OPERATING KEY ONLY F/TEMP CORE - $ 4.30

9FALKB6092A CONTROL KEY ONLY F/TEMP CORE - $ 5.40

007

4/24/06FalconPage 7








008







007

4/24/06FalconPage 7








008







007

C953 Rim Cylinder HousingHorizontal tailpiece standard. May bechanged to vertical

985C & 986C Mortise Cylinder 900 Series cylinders are furnishedwith #4 straight cam and 250 Serieswith #1 cloverleaf cam unlessotherwise specified.

Cylinders for IC Less CoreC987 mortise cylinder housingFurnished with standard #5 cam

Stocked ProductKB577G Standard G KeyKB628 A & B Keyway I. C.KB608 A & B Control Blank

Stocked ProductAO9894 for M531 AO9897 for M561 and M581

Stocked Product985C 1-1/8” 626 Finish986C 1-1/4” 626 Finish

AO9894 AO9897

Key Blanks Standard

Stocked ProductC953 613, 626 Finish 6 pin or 7 pin I. C. Less coreC987 613, 626 Finish 1-3/8” F/ 6 or 7pin I. C. Less coreC988 613, 626 Finish, 1-1/2” for 6 pin or 7 pin I. C. Less core

CAMS Only

Stocked ProductC646 Uncombinated core, 6 pin, Keyways A & B, Finish 606, 626C647 Uncombinated core, 7 pin, Keyways A & B, Finish 606, 626C606ACC Temporary coreC607 Combinated core, 7pin, Keway A, Finish 626KB6322A Operating Key for Temp coreKB6092A Control Key for Temp coreKB6322AC Cut Operating Key F/C607KB6092AC Cut Control Key F/C607

4/24/06FalconPage 7








008







007


Stock keyways A & BNote C606ACC does not include control & operating keys



Monarch by Falcon - Exits19 Series - Rim Device

Features:• Part number: 19REO X Finish• Function stocked: “EO” exit only• Trims Separately: Note: Lever trim is handed • 1906T Thumb piece ( new number 910) • 1909NL Night latch ( new number 910NL) • 1910L Entry Lever Dane ( new number 912L) • 914KIL BE Key in Lever( sectional) Blank Escutcheon • 914KIL IC Key in Lever ( sectional) Lever Entry X IC core • 914KIL KD Key in Lever ( sectional) Lever Entry • 914KIL NL Key in Lever ( sectional) Lever Night Latch• Finishes: Aluminum and Duro • Length: 36” and 48”• ANSI A156.3-2001 Grade 1 standards, UL Listed• Cut out: 161

F19 Series - Fire Rated Rim Device

Features:• Part number: F19REO X finish• Function Stocked “EO” exit only• Trims Separately: See page • 1906T Thumb piece ( new number 910) • 1909NL Night latch ( new number 910NL) • 1910L Entry Lever Dane ( new number 912L) • 914KIL BE Key in Lever( sectional) Blank Escutcheon • 914KIL IC Key in Lever ( sectional) Lever Entry X IC core • 914KIL KD Key in Lever ( sectional) Lever Entry • 914KIL NL Key in Lever ( sectional) Lever Night Latch• Finishes: Aluminum and Duro• Length: 36” and 48”• ANSI A156.3 Grade 1• UL for 1-1/2” hour door• Cut out 161

Panic Exit Hardware

The Monarch 19-R Series rim device that delivers superior panic hardware with modern touchbar styling. This non-handed device covers a 161 cutout and may be used on 13⁄4" narrow stile aluminum doors. The “EO” (Exit Only) device is ready to accept any trim function shown on page 12.

ANSI ANSIDEVICE & TRIM Type Function

19-R-EO 1 or 4 01

19-R-DT 1 or 4 02

19-R-NL 1 or 4 03

19-R-TP 1 or 4 05

19-R-TP-NL 1 or 4 06

19-R-K (or L or KIL) 1 or 4 08

19-R-K-NL (or L-NL or KIL-NL) 1 or 4 09

Note: For blank escutcheon specify BE.

SpecificationsHand: Non-Handed.

Functions: All functions built into “EO” device. All 19 Series trim works with rim or vertical devices. See Trim Selection Chart on pages 12 and 13.

Finishes: Powder-coated aluminum–SP28; powder-coated duranodic–SP313;stainless steel US-32D.

Strikes: F570 standard. 565, 571/571A, F490 optional.

Latchbolt: Stainless steel, 3⁄4" throw.

Deadlocking Latchbolt: Standard.

Dogging Feature: 1⁄2 turn hex dogging standard. No threaded parts to wear out.

Cylinder Dogging: Specify “CD” prefix. Use 11⁄8" long mortise cylinder with standard “A” cam.

Stock Sizes: 3'0" and 4'0". (See chart on page 15.)

Doors: 13⁄4" thick, wood or metal. Specify thickness if other than 13⁄4".

Narrow Stile Doors: Specify 565 strike. (See chart on page 15.)

Projection: 21⁄2" maximum; 17⁄8" dogged.

Electric Function: Can be interfaced with building security system. Security monitoring, electric dogging, exit indicator, and exit alarm available. (See separate electrical brochure.)

Fasteners: All mounting screws are concealed. Furnished with sheet metalscrews. Machine screws available, specify AMS.

Sex Bolts: 3-#4122 (1⁄4-20) SNB standard.

ANSI: Certified ANSI A156.3-2001 Grade 1 standards.

Shim Kit: For glass lite applications; 1⁄4" thick specify SK 19-R-1⁄4".

161 Cutout: Device covers 161 cutout with KIK/KIL and Centron trims. Other trim requires cover plate.

F570Standard

571/571AFor rim x verticalrod installations. 2789

Dogging Key

F490Strike optional

565For narrow stile door and

removable mullion installations. Cylinder Dogging

�Fire Exit Hardware

The F–19 Rim�fire exit device is an excellent addition to the touchbar. This device is non-handed and is listed by UL for B label fire doorinstallations on 4'0" x 7'2" single doors and/or 8'0" x 7'2" double doors with an F–4023 removable mullion or KRF-4023. The “EO” (ExitOnly) device is ready to accept any trim function shown on page 12.

SpecificationsUL: “B” label (11⁄2 hr.); 4'0" x 7'2".



Strikes: Stainless steel, F570 or F490.




Doors: 13⁄4" thick, wood or metal. Specify thickness if other than 13⁄4". (SNB must be specified on wood or composite doors.)

Projection: 21⁄2" maximum.


Fasteners: All mounting screws are concealed. Furnished with all machine screws.

Sex Bolts: When used with wood, composite or non-reinforced Hollow Metal, sex bolts must be specified, 3-#4122 (1⁄4-20) SNB standard.An additional 2-#2729 (10-24) SNB must be specified.





F-19-R-EO 1 or 4 01

F-19-R-NL 1 or 4 03

F-19-R-TP 1 or 4 05

F-19-R-TP-NL 1 or 4 06

F-19-R-K (or L or KIL) 1 or 4 08

F-19-R-K-NL (or L-NL or KIL-NL) 1 or 4 09


F570Standard

F490Strike optional

NON-HANDED RIM DEVICE F-19-R SERIESNON-HANDED RIM DEVICE 19-R SERIES

76

Panic Exit Hardware



19-R-EO 1 or 4 01

19-R-DT 1 or 4 02

19-R-NL 1 or 4 03

19-R-TP 1 or 4 05

19-R-TP-NL 1 or 4 06






















F570Standard


Dogging Key

F490Strike optional





















F-19-R-EO 1 or 4 01

F-19-R-NL 1 or 4 03

F-19-R-TP 1 or 4 05

F-19-R-TP-NL 1 or 4 06




F570Standard

F490Strike optional


76

The Monarch 19-R Series rim device that delivers superior panic hardware with modern touchbar styling. This non-handed device covers a 161 cutout and may be used on 13⁄4” narrow stile aluminum doors.

Panic Exit Hardware



19-R-EO 1 or 4 01

19-R-DT 1 or 4 02

19-R-NL 1 or 4 03

19-R-TP 1 or 4 05

19-R-TP-NL 1 or 4 06






















F570Standard


Dogging Key

F490Strike optional





















F-19-R-EO 1 or 4 01

F-19-R-NL 1 or 4 03

F-19-R-TP 1 or 4 05

F-19-R-TP-NL 1 or 4 06




F570Standard

F490Strike optional


76

Panic Exit Hardware



19-R-EO 1 or 4 01

19-R-DT 1 or 4 02

19-R-NL 1 or 4 03

19-R-TP 1 or 4 05

19-R-TP-NL 1 or 4 06






















F570Standard


Dogging Key

F490Strike optional





















F-19-R-EO 1 or 4 01

F-19-R-NL 1 or 4 03

F-19-R-TP 1 or 4 05

F-19-R-TP-NL 1 or 4 06




F570Standard

F490Strike optional


76

The F–19 Rim fire exit device is an excellent addi-tion to the touchbar. This device is non-handed and is listed by UL for B label fire door installations on 4’0” x 7’2” single doors and/or 8’0” x 7’2” double doors with an F–4023 removable mullion or CRF-4023.



Latch retention hold is in thetop latch. Retainer is releasedwhen it engages the strike.

SpecificationsHand: Field reversible.


Finishes: Powder-coated aluminum–SP28; powder-coated duranodic–SP313; stainless steel US-32D.

Strikes: 3788 strike is surface applied standard, 2130 strike is mortised into floor.

Angle Bracket: Use 4215 angle bracket in flush transom or rabbeted installations. Allows use of standard 3788 strike.

Latchbolt: Top stainless steel 3⁄4" throw. Bottom square bolt 1⁄2" throw.






Narrow Stile Doors: To 13⁄4" N.S. aluminum. With control trim–21⁄4" min. stile.

Projection: 21⁄2" max., 17⁄8" dogged.

Electric Function: Can be interfaced with building security systems. Securitymonitoring, electric dogging, exit indicator, and exit alarm available.


Sex Bolts: 3–#4122 (1⁄4–20) SNB standard. Hollow core wood, light gaugeHollow Metal, etc. require additional sex bolts. 19–V: 6–#2729#10–24 SNB; 19–V–LBR: 3–#2729 #10–24 SNB

ANSI: Certified ANSI A156.3 2001 Grade 1 standards.

19–V: Latch retention and 3788 strike top, deadbolt and 2130 flush strike bottom.

19–V–LBR: 3788 strike top.

Vertical Rods: Furnished to length based on 405⁄16" horizontal CL from finished floor and a 7'0" door standard. Variations from these standards must be specified when ordering.

Shim Kit: For glass lites applications; 1⁄4" thick specify SK-19-V-1⁄4".


Cylinder Dogging2789Dogging Key


19-V-EO 2 or 5 01

19-V-DT 2 or 5 02

19-V-NL 2 or 5 03

19-V-TP 2 or 5 05

19-V-TP-NL 2 or 5 06

19-V-K (or L) 2 or 5 08

19-V-K-NL (or KIL) 2 or 5 09


Panic Exit Hardware

Manufactured to the same exacting standards as the 19 Rim, the 19–V Exit Device complies with most exit door requirements, and is fully reversible and surface applied. This device is regularly furnished with deadlocking top latch with latch retention and square bolt at bottom. The “EO” (Exit Only) device is ready to accept any trim function shown on page 12.

3788Strike


Manufactured to the same exacting standards as the F–19 Rim, the F–19–V�Fire Exit Device complies with most exit door requirements, and is fully reversible and surface applied. This device is regularly furnished withdeadlocking top latch retention and square bolt at bottom. (This device is listed by UL for B label fire doorinstallations.) The “EO” (Exit Only) device is ready to accept any trim function shown on page 12.




Strikes: 3788 strike is surface applied. 2130 strike is mortised into floor.




Doors: 13⁄4" thick, wood or metal. Specify if other than 13⁄4" thick.


Electric Function: Can be interfaced with building security systems. Security monitoring,electric dogging, exit indicator, and exit alarm available.

Fasteners: All mounting screws are concealed. All machine screws standard.

Sex Bolts: 3–#4122 (1⁄4–20) SNB standard. Composite or non-reinforced wood,Hollow Metal require additional sex bolts. F-19–V: 6–#2729 #10–24SNB; F-19–V–LBR: 3–#2729 #10–24 SNB


F-19-V: Latch retention and 3788 strike top deadbolt and 2130 flush strike bottom.

F-19-V-LBR: Latch retention and 3788 strike top.

Vertical Rods: Furnished to length based on a 405⁄16" horizontal CL from finished floor and a 7'0" door standard. Variations from these standards must be specified when ordering.




F-19-V-EO 2 or 5 01

F-19-V-DT 2 or 5 02

F-19-V-NL 2 or 5 03

F-19-V-TP 2 or 5 05

F-19-V-TP-NL 2 or 5 06

F-19-V-K (or L or KIL) 2 or 5 08

F-19-V-K-NL (or L-NL or KIL-NL) 2 or 5 09


3788Strike

Latch retention hold is in thetop latch. Retainer is releasedwhen it engages the strike. Thedoor is in the closed position.

2130Strike2130

Strike

REVERSIBLE VERTICAL ROD DEVICE 19-V SERIES REVERSIBLE VERTICAL ROD DEVICE F-19-V SERIES

98


























19-V-EO 2 or 5 01

19-V-DT 2 or 5 02

19-V-NL 2 or 5 03

19-V-TP 2 or 5 05

19-V-TP-NL 2 or 5 06

19-V-K (or L) 2 or 5 08

19-V-K-NL (or KIL) 2 or 5 09


Panic Exit Hardware


3788Strike






















F-19-V-EO 2 or 5 01

F-19-V-DT 2 or 5 02

F-19-V-NL 2 or 5 03

F-19-V-TP 2 or 5 05

F-19-V-TP-NL 2 or 5 06




3788Strike


2130Strike2130

Strike


98


























19-V-EO 2 or 5 01

19-V-DT 2 or 5 02

19-V-NL 2 or 5 03

19-V-TP 2 or 5 05

19-V-TP-NL 2 or 5 06

19-V-K (or L) 2 or 5 08

19-V-K-NL (or KIL) 2 or 5 09


Panic Exit Hardware


3788Strike






















F-19-V-EO 2 or 5 01

F-19-V-DT 2 or 5 02

F-19-V-NL 2 or 5 03

F-19-V-TP 2 or 5 05

F-19-V-TP-NL 2 or 5 06




3788Strike


2130Strike2130

Strike


98


























19-V-EO 2 or 5 01

19-V-DT 2 or 5 02

19-V-NL 2 or 5 03

19-V-TP 2 or 5 05

19-V-TP-NL 2 or 5 06

19-V-K (or L) 2 or 5 08

19-V-K-NL (or KIL) 2 or 5 09


Panic Exit Hardware


3788Strike






















F-19-V-EO 2 or 5 01

F-19-V-DT 2 or 5 02

F-19-V-NL 2 or 5 03

F-19-V-TP 2 or 5 05

F-19-V-TP-NL 2 or 5 06




3788Strike


2130Strike2130

Strike


98

19 Series - Vertical Rod Device

Features: • Part number 19VEO X Finish • Function Stocked: Exit only• Trims Separately: Note: Lever trim is handed See Trim page • 1906T Thumb piece ( new number 910) • 1909NL Night latch ( new number 910NL) • 1910L Entry Lever Dane ( new number 912L) • 914KIL BE Key in Lever( sectional) Blank Escutcheon • 914KIL IC Key in Lever ( sectional) Lever Entry X IC core • 914KIL KD Key in Lever ( sectional) Lever Entry • 914KIL NL Key in Lever ( sectional) Lever Night Latch• Finishes: Aluminum and Duro• Lengths: 36” X 84” and 48” X 84”• ANSI A156.3 2001 Grade 1 Standard; UL Listed

F19 Series - Fire Rated Vertical Rod Device

Monarch by Falcon - Exits

Manufactured to the same exacting stan-dards as the 19 Rim, the 19–V Exit Device complies with most exit door requirements, and is fully reversible and surface applied. This device is regularly furnished with dead-locking top latch with latch retention and square bolt at bottom.

Manufactured to the same exacting stan-dards as the F–19 Rim, the F–19–V Fire Exit Device complies with most exit door require-ments, and is fully reversible and surface applied. This device is regularly furnished with deadlocking top latch retention and square bolt at bottom. (This device is listed by UL for B label fire door installations.)

Features• Part number F19VE X Finish• Function Stocked: “EO” exit only• Trims Separately: Note: Lever trim is handed See trim page • 1906T Thumb piece ( new number 910) • 1909NL Night latch ( new number 910NL) • 1910L Entry Lever Dane ( new number 912L) • 914KIL BE Key in Lever( sectional) Blank Escutcheon • 914KIL IC Key in Lever ( sectional) Lever Entry X IC core • 914KIL KD Key in Lever ( sectional) Lever Entry • 914KIL NL Key in Lever ( sectional) Lever Night Latch• Finishes Aluminum and Duro• Lengths: 36” X 84’ and 48” X 84”• ANSI A156.3 Grade 1 standard• UL “B” labeled 1-1/2 hour door



19 Series - Trim DesignsAll Trims Supplied Less Cylinder

1910L (912) L TrimMortise Cylinder 1-1/8”Required

1906T (910TP)Mortise Cylinder 1-1/8”Required

1909NL (910NL)Rim Cylinder Required

914 KIL KD Entry 914 KIL BE Blank Escutcheon 914 KIL IC Entry 914 KIL NL Night Latch

Stocked ProductAluminum, Duro

Stocked ProductAluminum, Duro

Falcon



Falcon - Exits25 R Series - Rim Exit Device

F25-R Series - Fire Rim Exit Device

Features• Non handed• 299 strike standard, other strikes available on special order• Latch bolt: Stainless Steel, ¾” throw• Dogging Feature: 1/2 turn hex dogging standard, No thread parts to wear out• Stock sizes: 36” and 48” width doors, • ANSI: Certified ANSI A156.3-2001 Grade 1• Sex Bolts: ( optional) Recommended when device is used with hollow core wood,

composite or light gauge hollow metal doors, For EO device specify eight (8) #2729 sex bolts. With Trim specify four (4) 2729 sex bolts

• EL function : Can be interfaced with Building security systems.

Options: Cylinder Dogging kit: Specify 25CDK1-1/8” Mortise cylinder not included.

Stocked Product36” door width US3, US26, 313AN, US26D48” door width 313AN, US26D

EL Function stocked: 36” door width 26D

Features• Non Handed• “A” label 3 hours 4’ 0” X 8’ 0”; 8’ 0” X 8’0” with F4023 Mullion• “B” label 1-1/2” hour for 8’0” X 8’)’ with KRF4023 Mullion• 299F strike standard, other strikes available on special order• Latch bolt: stainless Steel, ¾ “ throw• Deadlocking latch bolt standard• Stock sizes: 36” and 48” width doors• Mounting Height: 40-1/4” form CL to finished floor • Fasteners: All mounting screws are concealed, All machine screws standard• Sex Bolts: ( optional) Required when device is used with hollow core wood,

composite or light gauge hollow metal doors, For EO device specify eight (8) #2729 sex bolts. With Trim specify four (4) 2729 sex bolts

• ANSI: Certified ANSI A156.3 2001 Grade 1 Standards

• EL function : Can be interfaced with Building security systems.

Stocked Product

36” door width US3, US26, 313AN, US26D48” door width :313AN, 26D

EL Function stocked : 36” door width, 26D



Falcon - Exits25 V Series - Vertical Rod Exit DeviceFeatures:• Hand:Field Reversible• Strikes: 3788 Top strike is surface applied; 2130 bottom strike is mortised into the floor• Latch bolt: Top stainless steel ¾ throw; Bottom bolt is ½” throw• Latch Retention Hold: Standards with top latch • Sex Bolts: ( Optional) Recommended when device is used with hollow core wood, composite

or light gauge hollow metal doors, For EO device, specify twelve (12) #2729 sex bolts,, For devices with trim specify eight (8) #2729 sex bolts’

• ANSI : Certified ANSI A156.3-2001 Grade 1 standard• EL function : Can be interfaced with Building security systems.

Options: Cylinder Dogging kit: Specify 25CDK1-1/8” Mortise cylinders not included.12” & 36” Extension rods Available.

F25 V Series - Fire Vertical Rod DeviceFeatures• Hand: Field Reversible• UL: “A” Label 3 hour; 8’ X 10’ 90 minute same egress, 8’ X 10’• Wood Door: 20 minute 8’ X 10’; 90 minute 8’ X 9’ • Strikes: 3788 Top strike is surface applied; 2130 bottom strike is mortised into the floor• Latch bolt: Top stainless steel ¾ throw; Bottom bolt is ½” throw• Deadlocking Latch bolt: Standard in top latch• Latch Retention Hold: standard with top latch• F25-V LBR; Less bottom rod vertical device; “A” Label 3 hour- 8’ X 8’ 90 minute same

egress’ Wood Door 20 minute 8’ X 8’ openings. (F-LBR Must be ordered in pairs)• Fasteners: All mounting screws area concealed machine screws• Sex Bolts: ( Optional) Required when device is used with hollow core wood, composite or

light gauge hollow metal doors, Fro EO device, specify twelve (12) #2729 sex bolts,, For deices with rim specify eight (8) #2729 sex bolts’

• ANSI: Certified ANSI A156.3 Grade 1 standard• EL function : Can be interfaced with Building security systems.

Options: 12” & 36” Extension rods Available.

Stocked ProductF25 V Stock Finishes: 36” X 96” 313AN, US26D 48” X 96” 313 AN, US26D

F25 V LBR Stocked : 36” X 96” and 48” X 96” 313AN,US26D (Must be ordered in pairs)EL Function stocked: 36” X 96” 26D

Stocked Product36” X 96” door size US3, US26, 313AN, US26D48” X 96” door size 313AN, US26D

EL function stocked: 36” X 96” door size 26D



Falcon - Exits25 M Series - Mortise Exit Device

Features:• Hand: Field Reversible• Strike: 1279 standards• Latch bolt: Stainless steel, ¾ throw• Deadlocking Latch bolt: Standard• Dogging Feature: ½ hex turn, no thread parts to wear out• Fasteners: All mounting screws are concealed metal screws.• Sex Bolts: ( optional) Recommended when device is used with hollow core wood, composite or light gauge hollow metal doors,

For EO device specify six (6) #2729 sex bolts. With Trim specify two (2) 2729 sex bolts• ANSI: Certified ANSI A156.3 2001 Grade 1• Mortise Lock: Heavy wrought lock case with cast or sintered steel parts. Locks are designed to fit standard ANSI A115.1

preparation for 1-/34” thick doors Deadlocked when auxiliary bolt is depress 5/`6”

Stocked Product36” Width door in 26D

F25 M Series - Fire Mortise Exit Device

Features: • Hand: Field Reversible• UL: “A” label 3 hour, 4’ X 10” single doors, 8’ X 10’ pair of doors . (F25M X F25V) “B” Label ( 1-1/2 hour) with F1280 open back strike • Strike: 1279 standard• Latch bolt: Stainless steel, ¾ throw• Deadlocking Latch bolt: Standard• Fasteners: All mounting screws are concealed metal screws.• Sex Bolts: ( optional) Required when device is used with hollow core wood, composite or light gauge hollow metal doors, For EO device

specify six (6) #2729 sex bolts. With Trim specify two (2) 2729 sex bolts

Stocked Product36” Width door in 26D

Options: Cylinder Dogging kit :Specify 25CDK1-1/8” Mortise Cylinder not included.



Falcon - Exits

25-C Series - Concealed Vertical Rod Device

Stocked Product36” X 84” US26D

Features: • Hand: Field Reversible• Strikes: 4188 mortised top, 2130 bottom standard• Latch bolt: Top Stainless steel 3/4” throw, Bottom bolt ½”

throw• Deadlocking Latch bolt: Standard in top latch• Latch Retention Hold; Standard in top latch• Dogging Feature: ½ turn hex dogging standard, no threaded

parts to wear out• Fasteners: All mounting screws are concealed metal• Sex Bolts: ( optional) Recommended when device is used

with hollow core wood, composite or light gauge hollow metal doors, For EO device specify six (6) #2729 sex bolts. With Trim specify two (2) 2729 sex bolts

• ANSI: Certified ANSI A156.3-2001 Grade 1 standards. • Vertical Rods Furnished to length based on 40-1/4” hori-

zontal CL to finished floor and a 7’0” door

Options: Options: Cylinder Dogging kit: Specify 25CDK 1-1/8” Mortise Cylinder not included.12” & 36” Extension Rods Available.



Falcon - Exits

F25-C Series - Fire Concealed Vertical Rod DeviceF25C-WDC Series Fire Wood Door Concealed Vertical Rod Device

Features• Hand: Field Reversible• UL: “A” Label 3 hour- 8’ X 10’ 90 minute same egress, 8’ X 10’ Wood Door: 20

minute 8’ X 9’ 90 minute 8’ X 8’ • Strikes: 4188 mortise top; 2130 flush strike bottom• Latch bolt: Top Stainless steel 3/4” throw, Bottom bolt ½” throw• Deadlocking Latch bolt: Standard in top latch• Fasteners: All mounting screws are concealed metal• Sex Bolts: ( optional) Required when device is used with hollow core wood, com-

posite or light gauge hollow metal doors, For EO device specify six (6) #2729 sex bolts. With Trim specify two (2) 2729 sex bolts

• ANSI: Certified ANSI A156.3-2001 Grade 1 standards• WDC-20: Reinforced plates supplies standard for 20 minute doors only• Vertical Rods Furnished to length based on 40-1/4” horizontal CL to finished floor

and a 7’0” door

Stocked ProductF25C 36” X 84” US26DF25C-WDC 36” X 96” US26D, US3, US26



Lever Trim Only510 L - Entry Lock/Unlock, 1-1/4 Mortise Cylinders Not Included.510 LNL - Night Latch, Store Room, 1-1/4 Mortise Cylinders Not Included.510 LBE - Blank Escutcheon, 1-1/4 Mortise Cylinders Not Included.511 L - Entry Vandal Resistant, 1-1/4 Mortise Cylinders Not Included.510 L FSE - Entry Electrical Unlock, 1-1/4 Mortise Cylinders Not Included.510 LDT - Dummy Trim

Stocked Product510L, 510LBE, 510LNL Dane US3, US26, SP313, 26D Quantum SP313, 26D510LDT Dane 26D, SP313511L Dane SP313, 26D Quantum SP313, 26D510L-FSE Dane 26D Quantum 26D512TP, 512-NL 26D only

510L 510L-NL

510L-DT 510L-BE

Falcon - Exits

Pull Trims512TP - 1-1/4 Mortise Cylinders Not Included.512-NL - Night Latch, Rim Cylinder

Escutcheon: 2-1/4” x 16”Grip: 6-1/4” C-CProjection: 2-11/16”Brass and Stainless Steel

512TP 512-NL



F490Strike

F570(Standard)


The Monarch F-XX-R Series�Fire Rated Rim Device is produced with the demanding standards required for a quality fire rateddevice. The investment cast stainless steel chassis, stainless steel latchbolt and standard deadlocking feature provide years of reliableservice in higher traffic installations. The F-XX-R device is a single point, rim type latch with the traditional crossbar design.

Min. DoorDEVICE Length Strike Stile Opening Width

F-XX-R-EO 4´ F570/ 4˝ 2´6˝ up to 4´0˝F490

Note: Approximate. See appropriate templates.


UL: ˝A˝ label (3 hr.); 4´0˝ x 8´0˝; 8´0˝ x 8´0˝. ˝B˝ label (11⁄2 hr.) 8´0˝ x 8´0˝ with KRF-4023 mullion.

Functions: All functions built into ˝EO˝ (Exit Only) device. For K or L trim, add 3755 K hub. See Trim Selection Chart on pages 16 and 17.

Finishes: US3 (605); US4 (606); US10 (612);US10B (613); US26 (625);US26D (626); US32 (629); US32D (630).


Arms: Forged brass, aluminum and investment cast stainless steel.

Crossbars: 1˝ O.D., brass, bronze and stainless steel.Reinforced and crossbars available.

Latchbolt: Stainless steel, 3⁄4˝ throw.


Stock Sizes: 4´0˝ standard.

Doors: 13⁄4˝ thick, wood or metal. Specify thickness if other than 13⁄4˝.

Projection: 5˝ maximum.

Mounting Height: 401⁄4˝ from CL to finished floor.

Electric Function: Can be interfaced with building security systems. Lock/unlock andsecurity monitoring available. Subject to code requirements, stateand local. (See separate electrical brochure.)


Sex Bolts: When used with wood, composite or non-reinforced Hollow Metal,sex bolts must be specified, 10-#2729 SNB required. If through-bolted trim is used, 6-#2729 SNB required.


Double Cylinder: ANSI functions 07 and 10, specify TP2, K2 or L2.

Double Outside Cylinder: ANSI functions 07 and 10 with both cylinders on outside. Specify TP(2 O.C.), K(2 O.C.) or L(2 O.C.).

Center Case & Working Parts: Center case is investment cast stainless steel with heavy wrought,forged, investment cast and sintered metal parts.


Functions: All functions built into “EO” (Exit Only) device. For K or L trim, add3755 K hub. See Trim Selection Chart on pages 16 and 17.


Strikes: F570 adjustable strike standard. 565, 571, 571A, 579, F490 strike optional.


Crossbars: 1̋ O.D., brass, bronze and stainless steel.Reinforced crossbars available.


Deadlocking Latchbolt: Optional. Specify ˝DL˝ prefix.


Cylinder Dogging: Specify ˝CD˝ prefix. Uses rim cylinder (supplied).



Projection: 5˝ maximum; 4˝ dogged.


Electric Function: Can be interfaced with building security systems. Lock/unlock andsecurity monitoring available. (See separate electrical brochure.)

Fasteners: All mounting screws are concealed. Sheet metal screws standard.Machine screws available, specify AMS.

Sex Bolts: When device is used with hollow core wood, composite or light gauge Hollow Metal doors, specify 8-#2729 SNB whenthrough-bolted trims is used, specify 4-#2729 SNB.



Double Outside Cylinder: ANSI functions 07 and 10 with both cylinders on outside.Specify TP(2 O.C.), K(2 O.C.) or L(2 O.C.).

Center Case & Working Parts: Center case is pressure die cast aluminum with heavy wrought,forged, investment cast and sintered metal parts.


XX-R-EO 4´ 565 Flush 31⁄4˝ 2´6˝ up to 3´10˝565 33⁄4˝ 2´6˝ up to 3´11˝F570/F490 4˝ 2´6˝ up to 4´0˝579 31⁄2˝ 2´6˝ up to 3´10˝

Note: See page 15 for additional strike information. Approximate. See appropriate templates.

Panic Exit Hardware

The Monarch XX-R Series Rim Device is produced to meet the demanding requirements of higher traffic installations. This device isa single point, rim type latch with the traditional crossbar design.

F570(Standard)

579Strike

565(Optional)

571/571A(Optional)

2789Dogging Key

F490Strike

NON-HANDED RIM DEVICE F-XX-R SERIESNON-HANDED RIM DEVICE XX-R SERIES

76

F490Strike

F570(Standard)




F-XX-R-EO 4´ F570/ 4˝ 2´6˝ up to 4´0˝F490














































Panic Exit Hardware


F570(Standard)

579Strike

565(Optional)

571/571A(Optional)

2789Dogging Key

F490Strike


76

F490Strike

F570(Standard)




F-XX-R-EO 4´ F570/ 4˝ 2´6˝ up to 4´0˝F490














































Panic Exit Hardware


F570(Standard)

579Strike

565(Optional)

571/571A(Optional)

2789Dogging Key

F490Strike


76

REVERSIBLE VERTICAL ROD DEVICE XX-V SERIES

3788Strike

2130 Strike


The Monarch F-XX-V Series�Fire Rated Vertical Rod Device is designed to meet the demanding requirements of higher trafficinstallations. The F-XX-V is a surface-applied (including strikes) vertical rod type with the traditional crossbar design.


UL: ˝A˝ label (3 hr.); 8´0˝ x 10´0˝ double egress; 8´0˝ x 10´0˝ (F-XX-M x F-XX-V).

Functions: See Trim Selection Chart on pages 16 & 17.

Finishes: US3 (605); US4 (606); US10 (612); US10B (613); US26 (625);US26D (626); US32 (629); US32D (630).

Strikes: 3788 strikes are surface applied, standard. 2130 strike is mortised into floor.


Crossbars: 1˝ O.D., brass, bronze and stainless steel. Reinforced crossbars available.

Latchbolt: Top stainless steel, 3⁄4˝ throw. Bottom stainless steel bolt, 1⁄2˝ throw.


Latch Retention Hold: Standard with top latch.




Stile: 23⁄4˝ minimum when used in pairs.



Sex Bolts: When device is used with wood, composite or non-reinforced HollowMetal, specify 14-#2729 SNB. When used with through-bolted trim, deduct 4-#2729 SNB.


F-XX-V: Latch retention latch top. 3788 strike top, bottom bolt 2130 flush strike bottom.

F-XX-V-LBR: Less bottom rod vertical device with side-of-door-mounted auxiliaryfire latch (AFL), ˝A˝ label (3 hr.), 8´0˝ x 8´0˝ double egress. (20min. fire rating on wood doors.)

Vertical Rods: Furnished to length based on a 401⁄4˝ horizontal CL from finishedfloor, and a 7´0˝ door standard. Variations from these standardsmust be specified when ordering.


Functions: See Trim Selection Chart pages on 16 & 17.


Strikes: 3788 strikes are surface applied. 2130 strike is mortised into floor.

Angle Bracket: Use 4215 angle bracket in flush transom installations. Allows use ofstandard 3788 strike.


Crossbars: 1˝ O.D., brass, bronze and stainless steel. Reinforced crossbars available.

Latchbolt: Top stainless steel, 3⁄4˝ throw. Bottom stainless steel bolt, 1⁄2˝ throw.


Latch Retention Hold: Standard with top latch.


Cylinder Dogging: Specify ˝CD˝ prefix, uses rim cylinder.



Projection: 5˝ maximum, 4˝ dogged.

Stile: 23⁄4˝ minimum when used in pairs.



Sex Bolts: When device is used with hollow core, composite or light gageHollow Metal, specify 14-#2729 SNB. When used with through-bolted trim, deduct 4 SNB.


XX-V: Latch retention latch top. 3788 strike top, bottom bolt 2130 flush strike bottom.

XX-V-LBR: Less bottom rod vertical device.

Vertical Rods: Furnish to length based on a 401⁄4˝ horizontal CL from finished floor,and a 7´0˝ door standard. Variations from these standards must bespecified when ordering.

Panic Exit Hardware

The Monarch XX-V Series Vertical Rod Device is designed to meet the demanding requirements of higher traffic installations. The XX-V device is a surface-applied (including strikes) vertical rod type with the traditional crossbar design.

3788 Strike

2789Dogging Key

2130 Strike

REVERSIBLE VERTICAL ROD DEVICE F-XX-V SERIES

98

Falcon - Exits

XX Series - Rim Device

• Part number XXREO X finish• Handed Specify LHR or RHR• Trim available See page 6, Same trim as

18 series• Finishes: US3, 10B and 32D• Lengths: 48” stock; can be cut down• Cross Bars: 1” OD• Projections: 5” Maximum; 4” when dogged• ANSI A156.3-2001 Grade 1 standards

XX series - Vertical Rod Device• Part number XXVEO X finish• Handed: Specify LHR or RHR• Trim available; See page 6, same trim as 18 series• Finishes: US3, 10B, 32D

The Monarch XX-V Series Vertical Rod Device is designed to meet thedemanding requirements of higher traffic installations.The XX-V device is a surface-applied (including strikes) vertical rod type with the traditional crossbar design.

The Monarch XX-R Series Rim Device is produced to meet the demanding requirements of higher traffic installations. This device is a single point, rim type latch with the traditional crossbar design.



XX - Trim DesignsAll Trims Supplied Less Cylinder

812L QuantumRim Cylinder Required

812L BE Dane812L DaneRim Cylinder Required

812L Trim

820 NL Vanguard and TrimRim Cylinder Required

Specify:812LR - Rim812LV - Vertical

Falcon - Exits

Stocked Product10B, 32DUS3 DANE ENTRY

Stocked Product10B, 32D



Falcon

DOUBLE DOOR APPLICATION Strike Installed With Min. Stile B *299 2923 mullion 4 1⁄8” 3”299 4023 mullion 4 3⁄8” 3 1⁄4”299-F F-4023 mullion 4 3⁄8” 3 1⁄4”499-F F-4023 mullion 4 1⁄2” 3 5⁄16”264 2923 mullion 4” 2 7⁄8”264 4023 mullion 4 1⁄4” 3 1⁄8”1439 2923 mullion 3 7⁄8” 2 3⁄4”1439 4023 mullion 4 1⁄8” 3”1606 2923 mullion 4 1⁄4” 2 5⁄8”1606 4023 mullion 4 1⁄2” 2 7⁄8”1609 Surface 25-V 4” 2 3⁄8”*Backset to vertical center line on the device.

19, 25, and XX Accessories and Options

Stocked Product4023,F4023 7’2” & 8’0” SP28KR4023,KRF4023 7’2” & 8’0” SP28

Removable Mullion• The F4023, KRF-4023 and KR-4023 steel mullions are for use with the 19-R, 25-R, and XX-R devices

on double door openings. Advantage: Increased security and tighter closure. Minimizes door warpage and sag. Regulates the flow of in-and-out traffic.

• Falcon removable mullions are easily removed and reinstalled for full width access.• Rim devices are used on both leaves, attaining a perfectly symmetrical opening.• The mullion assembly consists of a mullion, top and bottom mounting brackets and a screw pack.• The F4023 and KRF-4023 fire-rated mullions also include four stabilizer blocks as required for labeled

installations.• Mullions may be cut on the job for doors under stock lengths.• KR Mullions require 11⁄4” mortise cylinder with standard A cam.

Features• Mullion fittings – ductile iron.• F4023, 4023, KRF-4023 and KR-4023– 2” x 3” x height.• 2923 mullion - 1-1/2’ x 2-1/2’ x height.• SP28• 7’ or 8’ door opening standard, other door opening as specified.

Cylinders• Cylinder supplied only when specified.• Cylinders keyed different unless specified keyed alike.

Sex Bolts• 325 (1⁄4”-20 Thread)• 425 (#10-24 Thread)



Falcon8200 Series - Low Energy Operator

Stocked Product8231 Pull side operation 8242 Push side operation

Finish: aluminum

Features:

Designed to fit perfectly.The small footprint and elegant design of theFalcon 8200 Series make it a perfect solution fora range of applications.

• Assisted living • Hospitality• Retail • Small office• Restaurants • Ambulatory care



Dor-O-Matic by Falcon - Closers

SC80 Series - Medium Duty Closer

SC61 Series - Light to Medium Duty CloserFeatures:• Meets ANSI A1117.1• ANSI/BHMA A156.4, Grade 1• UL Listed• 1-3/8” diameter piston• Closer mounts hinge side, top jamb or parrallel arm when either the

Rw/PA or Hw/PA arm is specified.• Adjustable sizes 1-4 • Single piece cast aliminum body• Staked valves• Non-handed left or right swinging doors• Separate adjustable general speed, latch speed, and backcheck• Heat-treated steel piston• Heat-treated pinion• UL 10C approved fluid• Universal screw pack• 10-year warranty

Features:• Meets A156.4, Grade 1 Standard• 1-3/8” diameter piston• Ready to mount hinge side, top jamb or parrallel arm

configurations• Arm options: regular• Suitable for interior doors up to 48” (1219 mm) wide, exterior

doors up to 36” (914 mm) and can be adjusted to meet the ADA accessability requirements

• Single piece cast aliminum body• Staked valves• Non-handed left or right swinging doors• Separate adjustable general speed, latch speed, and backcheck• Heat-treated steel piston• Heat-treated pinion• Cover is high-impact UL listed fire retardant plastic that meets UL

10C and UBC-7-2 (1997) fire test• UL 10C approved fluid• Universal screw pack• 10-year warranty

Stocked ProductSC61 Aluminum, Dark Bronze




Dor-O-Matic by Falcon - ClosersSC90 Series - Light Duty CloserFeatures:• Meets A156.4, Grade 1• Ready to mount hinge side, top jamb or parrallel arm configurations• Arm options: regular• Single piece cast aliminum body• Non-handed left or right swinging doors• Separate adjustable general speed and latch speed• Heat-treated steel piston• Heat-treated pinion• UL 10C approved fluid• Universal screw pack• 10-year warranty


Falcon - Actuators8310-844 - SeriesTransmission Kit

8310-856T - SeriesRound Surface 4-1/2” Actuator

8310-865 - SeriesWireless Receiver

8310-868S - Series4-1/2” Box only

B SERIES - Dane Desin B Series - Dane Designabs-abs.com/hardwarePages/Color_Catalog/Falcon_C.pdf ·...

Documents

Transcript of B SERIES - Dane Desin B Series - Dane Designabs-abs.com/hardwarePages/Color_Catalog/Falcon_C.pdf ·...