B AGV 21.3 EN
Transcript of B AGV 21.3 EN
INNOVATIONS 21.3
SOFTWARE INNOVATIONS
The new software version Jaltest 21.3 once again offers more improvements and
innovations that consolidate this tool as a benchmark in multibrand diagnosis for
commercial and agricultural vehicles, OHW (Off-Highway) and MHE (Material Handling
Equipment) applications, and vessels.
In this version, the times of version download and
application execution have been improved. Also, it
is possible to configure the application theme in
“Configuration (user settings) > Graphic
customisation” to change the colour depending
on the selected module CV, AGV, OHW, MHE or
MARINE.
In addition, from this menu, it is now possible
to show the GRP vehicle list when opening the
application. This possibility facilitates access to
the vehicle, equipment or vessel for users that
work with their own number plates or serial
numbers with all the benefits that this brings
when associating reports, etc.
Improved information in communication errors
If a communication error occurs when
connecting to the system, the supply
voltage of the device is displayed. A message
is also displayed if the diagnostic device
identifies only the connection to the PC
through the USB cable.
Improved information in error reading
A message is displayed when a system does not provide information on the presence of
errors or Freeze Frame Data.
User interactions in the diagnostic report
To get a better reading of reports, the user
interactions in selection steps and with
buttons during the execution of a
functionality are shown in the report.
Links to Jaltest Tools catalogue
Trigger: More than one condition per measurement
It is possible to define more than one condition for measurement Triggers. In addition,
the user can decide if the selected measurements will be paused when the condition of
all measurements in which Triggers have been defined is met, or when any of the
conditions defined in one of the measurements are met.
Automatic IP configuration in Ethernet systems
For programming the EOL system of FENDT, for example, in 700 Vario Series, Final Tier
4/ Stage IV engine, it is necessary to connect the JDC 500 cable in the virtual terminal
through the Ethernet protocol. In this version, although the information for the manual
IP configuration is still available, an automatic configuration process has been
developed.
GRP Custom field in reports
In addition to general fields, the user can include further interesting information in the
report, such as the engine type, as shown in the example.
Multiple selection of reports
Thanks to the “Multiple selection” option, it is possible to print and delete several reports
at the same time.
Alarm configuration
New “Alarms and notifications” menu that enables the users to configure alarms,
associate documents, customise alarms, etc.
Other functionalities
- Report configuration for guest users. In GRP Synchro and GRP Enterprise phases, the
administrator can decide whether the guest users can generate reports or not.
- Export/Import client vehicles.
- Add actions to the tool use history. For several versions, the administrator user can
monitor the connection of their vehicles, and now they can monitor the actions they
consider relevant, for example, the particulate filter regeneration in a particular
system, calibrations, etc. To select the action to be monitored, it is only necessary to
click on its name with the right mouse button.
BRANDS AND MODELS
Take into account that this document is only a summary of the most relevant
information of this new version. For further information, please visit Jaltest Report.
Some of the new models and brands in Jaltest are listed below.
TRACTOR
CASE iH
Farmall A/C Compact Series, engine: Final Tier 4/Stage IV
LINDNER
Geotrac 64/74/114 EP
Lintrac 75 LS
Lintrac 115 LS
Lintrac 130
LS
XU Series
XR Series
NEW HOLLAND
T9 PLM Series – Auto Command
Workmaster Compact Series
HARVEST EQUIPMENT In this version, new brands have been included in: GRIMME and JACTO.
MASSEY FERGUSON
9530 Series
9550 Series
9560 Series
IDEAL Series
SELF-PROPELLED AND TRAILING IMPLEMENT New brand of AIR-O-FAN trailing atomizer sprayers.
FARESIN
Leader Series, engine: Tier 3 / Stage III
DIAGNOSIS AND SYSTEMS
Take into account that this document is only a summary of the most relevant
information of this new version. For further information, please visit Jaltest Report.
TRACTOR
CASE iH
Models with Final Tier 4 and Tier 5 engines:
BRK brake system.
ACM armrest system.
SFA front axle suspension system.
DEC and DEC CVT transmissions.
EDC 7 UC31 engine control system in Interim
Tier 4/Stage IIIB engines, reset of the vehicle
start counter.
TCM transmission, calibration in Puma Full
Power Shift TMR models.
DEUTZ-FAHR
SECU central computer in 6G Series, 6 TTV Series, 6.4 Series, etc. models.
EMR5-EDC MD1 engine control system,
activations of the throttle valve and EGR valve,
checks such as cylinder cut-out, diesel
particulate filter regeneration, inducement
mode reset, oil change reset, etc.
FENDT
EOL vehicle configuration in several models:
- 200 Vario VPF Series, engine: Interim Tier 4/Stage IIIB
- 200 Vario VPF Series, engine: Final Tier 4/Stage IV
- 900 Vario Series, engine: Interim Tier 4/Stage IIIB
EOL vehicle configuration for 700 Vario Series, motor Tier 3/Stage III models, new
system functionalities.
JONH DEERE
PTA transmission in 6M Series models.
CSC cab suspension in 7R Series models.
PTU transmission in 5R Series models,
transmission calibration and range shift
position sensor calibration.
KUBOTA
TCU-KVT transmission in M7 models, hydrostatic unit calibration and power take-off
clutch calibration.
MASSEY FERGUSON
Autotronic 5-TECU transmission, activations of the suspension lifting and lowering
solenoid valves.
NEW HOLLAND
Models with Final Tier 4 and Tier 5 engines:
BRK brake system.
ACM armrest system.
TCM transmission in T6 Series-DCT and T5 Series-Dynamic Command models.
SFA suspension control system.
DEC CVT transmissions in T5 models.
ECM Shibaura engine control system, diesel
particulate filter soot content reset.
SAME
SECU central computer in Fortis 100 Series and Fortis 100.4 Series models.
New functions of the EMR5-EDC MD1 Deutz engine control system.
STEYR
R2 and SFA suspension systems.
TCU2 transmission, calibration for MULTI Series models.
VALTRA
New systems in several models.
DCC3 suspension system, front suspension calibration and cab calibration in S2 models.
HARVEST EQUIPMENT
CASE iH
EDC 7 UC31 engine control system in Interim Tier 4/Stage IIIB engines, reset of the
vehicle start counter.
UCM harvest system in Axial-Flow harvest equipment, view and assign LIN controllers.
CLAAS
EDC 17 CV42 Maste/Slave MAN engine control system in Jaguar models.
DEUTZ-FAHR
New functions of the EMR5-EDC MD1 Deutz engine control system. Also, this system is
included in other harvest equipment, for example from GREGOIRE brand.
JOHN DEERE
PTP transmission in CH300 Series and CH500 Series models.
MTS-SANDEI
EMS V3 engine control system in TH Series models, checks such as the NOx sensor test
or the SCR catalytic converter efficiency test and parameter modification of the power
take-off, engine configuration, engine speed rate, fuel trim, etc.
NEW HOLLAND
UCM harvest system. View and assign LIN controllers.
SELF-PROPELLED AND TRAILING IMPLEMENT
New functions of the EMR5-EDC MD1 Deutz engine control system in Pantera 4503
model of AMAZONE brand and in FARESIN brand.
TECHNICAL INFORMATION
Technical and maintenance data of the vehicle Engine technical data in CASE iH, DEUTZ-FAHR, FENDT and NEW HOLLAND that also
includes data in harvest equipment (CR Series, 7000 Series, etc. models)
Wiring diagrams and technical information Wiring diagrams and technical information updated on systems of brands such as
DEUTZ-FAHR, FENDT, JOHN DEERE, etc. It is important to highlight the model
diagrams in some NEW HOLLAND models, for example, the T7 Series – Auto Command
model, Interim Tier 4/Stage IIB engine.