AZURE LED STREET LIGHT INSTRUCTION - Armadillo LED Lightingarmadillolighting.com › wp-content ›...
Transcript of AZURE LED STREET LIGHT INSTRUCTION - Armadillo LED Lightingarmadillolighting.com › wp-content ›...
AZURE LED STREET LIGHT INSTRUCTIONAZURE LED STREET LIGHT INSTRUCTION
Product Size:
Note: Take AZURE 120 LED Street lamp as an exampleProduct Specification unit: mm
Product L W HAZU030 500.0 345.0 105.0AZU060 565.0 345.0 105.0AZU090 625.0 345.0 105.0AZU120 685.0 345.0 105.0AZU150 755.0 345.0 105.0AZU180 815.0 345.0 105.0AZU210 875.0 345.0 105.0AZU240 935.0 345.0 105.0AZU270 995.0 345.0 105.0
H
W
L
Installation Instruction:
Warning: Luminaire can not be directly installed on the surface or in the areas of flammable material in any circumstancesWarning: If outer flexible cable or cord of luminaire are damaged, only manufacturer, its agent or eligible contractor canreplace to avoid accident.
Step 1: Press down the snap outwards to open, and unscrew, using 4mm allen key.
screws
snap lock
Step 2: Diagram A for standard wiring and Diagram B include optionalPhotocell connection.Installer is responsible to provide durable insulated and waterproof connector.Once connected, slide on and mount lamp into the lamp post arm.
Connect the power supply wires with the retention wire in lamp post.
diagram Alamp postarm max 60mm
lamp head 61.5mm
diagram B
cable connector
lamp head 61.5mm
lamp post arm max 60mm
diagram A
diagram B
Step 3: Balance the lamp position, tight allen key bolts (M10). Adjust tilt angle by elevation fixing, tight securely, lock cable fix head.
elevation fixing screws
M10 bolts
Step 4: Close cover and press down to lock. Simply lock down clip until tightened.Use opposite side 4mm allen key to lock bolts on the cover.
Caution:Ensure safety and firmness of wiring junction.Protect power supply cables against and damage during installation.DO NOT clean lens with strong acid and any marked corrosive liquids.
© armadilloLED-BG.AZU.v1.4.1
AZU300 1060.0 345.0 105.0
AZU300 100V-277V~ 50/60Hz 0.95 DC53V Tc:65°C IP66 L265xW52mm 2.3mmPC Aluminum Alloy 13.00 14.25300W Type I
Address: Bigods Hall, Bigods lane, Great DunmowEssex, CM6 3BE, United Kingdom
tel. 0845 060 4000 intl. 0044 1371 87 69 69 fax. 0845 060 4001 intl. 0044 1371 87 54 37
© 2009 Armadillo LED (part of Armadillo Marketing Limited est. 1996) ISO9001:2008, ISO14001:2004 Certified All rights reserved. Reproduction in whole or in part is prohibited without the prior written consent of the copyright owner. The information presented in this document does not form part of any quotation or contract, is believed to be accurate and reliable and may be changed without notice. No liablity will be accepted by the publisher for any consequence of its use.
wiring diagram
4 way terminal block
rotate towards arrow indication
Top of the photocell
Light Controller / Photocell Installation Instruction
1. Remove waterproof cover from top of the lamp. 2. Lock the base of photocell controller with the M4 * 25 + screws into the socket
3. Place photocell into fixed socket, and lock by turning towards arrow indication.
light control waterproof coverphotocell base M4 * 25 + screws
4. Close cover and press down to lock. Wrench snap inside until tightened.Use opposite side 4mm allen key to lock bolts on the cover.
5. Wiring diagram (see page 1 for additional info)
AZURE LED Street Lamp Main Technical Parameters
AZU030
AZU060
AZU090
AZU120
AZU150
AZU180
AZU210
AZU240
AZU270
100V-277V~
100V-277V~
100V-277V~
100V-277V~
100V-277V~
100V-277V~
100V-277V~
100V-277V~
100V-277V~
50/60Hz
50/60Hz
50/60Hz
50/60Hz
50/60Hz
50/60Hz
50/60Hz
50/60Hz
50/60Hz
0.95
0.95
0.95
0.95
0.95
0.95
0.95
0.95
0.95
DC53V
DC53V
DC53V
DC53V
DC53V
DC53V
DC53V
DC53V
DC53V
Tc:65°C
Tc:65°C
Tc:65°C
Tc:65°C
Tc:65°C
Tc:65°C
Tc:65°C
Tc:65°C
Tc:65°C
IP66
IP66
IP66
IP66
IP66
IP66
IP66
IP66
IP66
L265xW52mm
L265xW52mm
L265xW52mm
L265xW52mm
L265xW52mm
L265xW52mm
L265xW52mm
L265xW52mm
L265xW52mm
2.3mm
2.3mm
2.3mm
2.3mm
2.3mm
2.3mm
2.3mm
2.3mm
2.3mm
PC
PC
PC
PC
PC
PC
PC
PC
PC
Material Size Thickness
Protective CoveringRated Power
Product Specification
Input VoltageFrequency
RangePower
Factor >(PF)Working Voltage
Working Environment IP RatingSymbol of power
typesThe temperature ofLED Module Shell
Aluminum Alloy
Aluminum Alloy
Aluminum Alloy
Aluminum Alloy
Aluminum Alloy
Aluminum Alloy
Aluminum Alloy
Aluminum Alloy
Aluminum Alloy
T3/T4 Lens - Asymmetrical LENS
lamp body
Working temp.-40°C ~ +55°C;Working humidity:10% ~ 95%;
Weight
G.W (KGS)N.W (KGS)
4.90
6.30
7.70
9.10
10.50
11.00
11.50
12.00
12.50
5.75
7.30
8.40
10.10
11.55
12.58
12.60
12.84
13.96
30W
60W
90W
120W
150W
180W
210W
240W
270W
Type I
Type I
Type I
Type I
Type I
Type I
Type I
Type I
Type I
© armadilloLED-BG.AZU.v1.4.1