Axial-Flow 2013 Combine and Header Compatibility Guide...

Grain Harvesting GH-2147-12

9/21/2012 Case IH Product Information 1

Axial-Flow® 2013

Combine and Header

Compatibility Guide

This is a Sales Education document

not to be used for advertising.

Book: Grain Harvesting

Section: General

Form No.: GH-2147-12

Replaces: GH-2102-10

Date: September 2012

PR

OD

UC

T IN

FO

RM

AT

IO

N

PR

OD

UC

T IN

FO

RM

AT

IO

N



Axial-Flow Combine / Header Compatibility

Introduction For over 35 years, Case IH customers have come to expect great performance out of their Axial-

Flow combines, and the same goes for Case IH headers. Case IH headers play a very important

role in harvesting. Our Case IH engineers continue to enhance, refine and expand the header

lineup to provide Case IH customers the latest in header technology. This Product Information

piece details header compatibility of each header model as it relates to a specific Axial-Flow

combine.

Axial-Flow Combine and Header Compatibility, Including Commonly Ordered Conversion

Kits

Model Year 2013 Header Compatibility

5088/5130 6088/6130 7088/7130 7120/7230 8120/8230 9120/9230

2010 20, 25, 30 ft. 20, 25, 30 ft. 20, 25, 30 ft. 20, 25, 30 ft. 20, 25, 30 ft. 20, 25, 30 ft.

3020 20, 25, 30 ft. 20, 25, 30, 35 ft 20, 25, 30, 35 ft. 20, 25, 30, 35 ft. 20, 25, 30, 35 ft. 20, 25, 30, 35 ft.

3400 3406, 3408 3406, 3408, 3412 3406, 3408, 3412 3408, 3412 3408, 3412, 3416,

3418

3408, 3412,

3416, 3418

2600 2606 2606, 2608 2606, 2608 2608, 2612 2608, 2612 2608, 2612

2142 30 ft. 30, 35 ft 30, 35 ft. 30, 35 ft 30, 35 ft 30, 35 ft

2152 25 ft. 25, 30, 35 ft 25, 30, 35, 40 ft 25, 30, 35, 40 ft 25, 30, 35, 40,

45 ft

25, 30, 35, 40,

45 ft

2162 NA 30, 35 ft. 30, 35, 40 ft. 30, 35, 40, 45 ft. 30, 35, 40, 45 ft. 30, 35, 40, 45 ft.

3016 12 ft. 12 ft. 12, 15 ft 12, 15 ft 12, 15 ft 12, 15 ft

The chart above lists the recommended combine and header combinations for maximum

performance and productivity. The following pages contain information about converting combines

and headers to accept configurations not listed in the compatibility chart above, although

performance can be compromised in some conditions and applications.




1010 – 20 ft. Version

Part Number Description

87746706 Electrical Adapter kit

87552504 Hydraulic Adapter kit

87336803 Sliding pin latch kit

125959A1 Slow down pulley

247426A1 Belt

87374406 Combine Feeder Face

1010 – 25 & 30 ft Version




87336803 Sliding pin latch kit


247426A1 Belt


1020 – 17.5, 20 & 22.5 ft Version




87336803 Sliding pin Latch Kit



1020 – 25 & 30 ft Version




87336803 Sliding pin Latch Kit



Conversion to enable 1010/1020 Grain Heads to fit 5088/6088/7088 & 5130/6130/7130 are listed

below.

1000 Series Grain Heads




2010 and 2020 Grain Heads

2010 2020 Description

415074016 N/A Complete kit without header height control

415075016 415077016 Complete kit with auto header height (no Field Tracker)

415076016 415078016 Complete kit with auto header height and Field Tracker

Note: The above are ordered as Whole goods Factory Supplied Accessories. Additional

details of what is included in the kits are listed below.

Conversion to fit 2010 and 2020 platforms on a

21/23/25 series combine are listed below.




3020 Flex Header

Kit Part Number Part Numbers and Descriptions

84480201* 21/23/2500 Series

Mechanical Components

Electrical Components

PTO Half Shaft

Instruction Manual

*Combine must be equipped with the following Other Required Kits listed below.

Other Required Kits or Components

87539791 Sliding Latch Pin Kit - With Field Tracker

87539793 Sliding Latch Pin Kit - Without Field Tracker

87301386E Hydraulic Connector – Single Point Hydraulic Hookup

Conversion Kit and other requirements to

fit 3020 Flex Header on a 21/23/2500

series combine are listed below.




Conversions to fit 2200 and 3200 Corn Heads on 5088/6088/7088 & 5130/6130/7130

combines are listed below.

2200 and 3200 Corn Heads

Note: The row unit angle on the above conversion kits is not optimized which could

cause performance issues in some conditions. The front feeder face plate angle

may need to be adjusted to compensate for field conditions.


84135007 Complete kit for 2206/3206 See Below for more detail.




87473648 Latch kit for 70/8010, 20, 88 & 30 Series Feeder/Header Interface

87337673 Latch kit for legacy or 23/2500 Series Feeder/Header Interface (Header Parts for Sliding Pin

Latch). Not needed if header has already been updated to sliding Pin Latch design.

Order one of the above kits and one of the following latch kits.


2206/3206 5088/6088/7088 & 5130/6130/7130

84135007—> Yoke and Bearing Cross assembly

Sprocket 25T WA

Chain Drive

Spring

Quick Coupling

Elbow, 90 ADJ

Adapter Harness for Header Hookup

Plate, CYL Cover

Kit Includes Misc. Hardware

Kit Includes Hoses and Couplers




2200 and 3200 Corn Heads (Continued)

Conversions to fit 2200 and 3200 Corn Heads on 5088/6088/7088 & 5130/6130/7130 Series

Combines are listed below.


2208/3208 5088/6088/7088 & 5130/6130/7130


Sprocket 25T WA

Chain Drive

Spring

Quick Coupling

Elbow, 90 ADJ


Plate, CYL Cover




22128/3212 5088/6088/7088 & 5130/6130/7130


Sprocket 25T WA

Chain Drive

Spring

Quick Coupling

Elbow, 90 ADJ


Plate, CYL Cover






2200 and 3200 Corn Heads (Continued) Conversions to fit 2200/3200 Series Corn Heads on 7010/8010 & 7120/8120/9120 &

7230/8230/9230 combines are listed below.


87041928 Complete kit for 2208/3208 See Below for more detail


Note: The row unit angle on the above conversion kits is not optimized which could cause performance issues in

some conditions. The front feeder face plate angle may need to be adjusted to compensate for field conditions.

2208/3208 7010/8010 & 7120/8120/9120 & 7230/8230/9230

87041928—> Drive Unit PTO A

Sprocket 30T WA

Chain Drive

Spring

Quick Coupling

Elbow, 90 ADJ

Plate, CYL Cover

Sensor, AHHC

Harness, 30 Foot

Kit includes Misc. Hardware

Kit includes Hoses and Couplers

2212/3212 7010/8010 & 7120/8120/9120 & 7230/8230/9230

87041425—> Drive Unit PTO A

Sprocket 30T WA

Chain Drive

Spring

Quick Coupling

Elbow, 90 ADJ

Plate, CYL Cover

Sensor, AHHC

Harness, 30 Foot

Kit includes Misc. Hardware

Kit includes Hoses and Couplers




3400 Corn Heads

There are no provisions to adapt a 3400 series Corn Head to a 21/23/2500 series combine.

2600 Series Chopping Corn Heads


87588414 Convert 2606 from 23/2500 to 88/10/20/30 Series

87588415 Convert 2606 from 88/130 series, 10/20/230 series to 23/2500 series

87588416 Convert 2608 from 23/2500 88/10/20/30 Series

87588417 Convert 2608 from 88/130 series, 10/20/230 series to 23/2500 series




2052 & 2062 Draper Heads

Conversions to convert from one series combine to another, or if head was ordered with a

generic adapter, are listed below.


87430799, 87430802, & 87430810 From 21/23/2500 to 88/130 series, 10/20/230 series (45” in-feed deck)

87461691 From 21/23/2500 to 88/130 series, 10/20/230 series (56” in-feed deck) Complete kit

contains all electrical, hydraulic and mechanical connections.

87430800, 87430798, & 87430809 From 88/130 series, 10/20/230 series to 21/23/2500 series (45” in-feed deck)

2042 Draper Heads Conversions to convert from one series combine to another, or if head was ordered with a

generic adapter, as listed below.


87430799, 87430802, & 87430810 From 21/23/2500 to 88/130 series, 10/20/230 series (45” in-feed deck)

87430809, 87430800, & 87430798 From 88/130 series, 10/20/230 series to 21/23/2500 series (45” in-feed deck)

2142/2152/2162 Draper Heads

Conversions to convert from one series combine to another, or if head was ordered with a generic

adapter, are listed below.


87557886 Completing package for 88/130 series, 10/20/230 series

87563623 Completing package for 23/2500 series and 88/130 series with legacy 23/2500 feeder conversion

package installed




2015 and 2016 Pickup Heads

2009 Model Year was the last build of the 2015 pickup head. The 2016 fits the 88/130

series, 10/20/230 series. No kits are available at this time to convert to a 21/23/2500 series.

3016 Pickup Head


84268190* Kit for 15ft 3016 21/23/2500 Series

84480830* Kit for 12ft 3016 21/23/2500 Series

Mechanical Components

Electrical Components

PTO Half Shaft

Instruction Manual

*Combine must be equipped with the following Other Required Kits listed below.

Other Required Kits or Components

87539791 Sliding Latch Pin Kit - With Field Tracker

87539793 Sliding Latch Pin Kit - Without Field Tracker

87301386E Hydraulic Connector – Single Point Hydraulic Hookup

Conversion Kit and other requirements to

fit 3016 Pickup Header on a 21/23/2500

series combine are listed below.



Summary Case IH headers continue to meet and exceed Case IH customer expectations in the areas of

performance and increased productivity. To further increase legacy Axial-Flow combines

productivity, Case IH has developed kits to allow new headers to be installed on prior model

combines. This allows legacy combines to take advantage of the new header designs.

Case IH engineering is not only supporting future Axial-Flow combines but also past models to

ensure there longevity and resale value for today and into the future.

Sell the Axial-Flow Advantage!




NOTES




The information presented herein is intended for sales education

purposes and is intended for the use of CNH America LLC, its

affiliates, and its independent dealers only. This information is to be

treated as CONFIDENTIAL and is not to be used for advertising

purposes. Competitive comparisons are based on competitive

information known at time of printing. Sources of information include

published industry specifications and data. General statements

made herein are the opinions of the authors concluded from

supporting data.

Note:

Specifications are stated in accordance

with industry standards or recommended

practices, where applicable.

Important:

CNH America LLC reserves the right to

change product specification without

notice and without incurring any

obligation relating to such changes.

Any trademarks referred to herein in

association with the goods and/or

services of companies other than

CNH America LLC are the property of

those respective companies.

Visit Case IH on the Web at

www.caseih.com

CNH AMERICA LLC

700 STATE STREET

RACINE, WI 53404 U.S.A.

http://www.caseih.com/

Axial-Flow 2013 Combine and Header Compatibility Guide...

Documents

Transcript of Axial-Flow 2013 Combine and Header Compatibility Guide...