AWJ · So tests of cutting stainless plate of over 150mm in thickness and using recycled abrasive...

6
AWJ 1 AWJ Assessment of the Applicability of AWJ Technique for Dismantling the Reactor of “Fugen” - Performance of Underwater-Cutting Stainless Plates and Recycled Abrasive - SHIN-ICHIRO MARUYAMA SHIN-ICHI NISHIO (AWJ)t=150mm 200mm 200mm It has been demonstrated that AWJ technique cut the mock-up double tubes of core internal and stainless plate in 150mm thickness with the small cutting head. But, further improvement of cutting performance and reducing secondary waste are expected. So tests of cutting stainless plate of over 150mm in thickness and using recycled abrasive were conducted. The followings were clarified; 1) The possibility of underwater-cutting over 200mm in thickness, 2) The relationship between degradation of cutting performance and recycled abrasive particle size. Key Words: Fugen, Reactor Dismantlement, Abrasive Water Jet(AWJ), Underwater-cutting ( ) 2520033 1) 224 ( ) 2) (224)(Zr-Nb) (224) (224)(SUS) () () (224)(SUS) 7 m 9m (Zry-2) 137

Transcript of AWJ · So tests of cutting stainless plate of over 150mm in thickness and using recycled abrasive...

���������������� AWJ ����������

1

���������������� AWJ ����������

�����������������������������

Assessment of the Applicability of AWJ Technique for Dismantling the Reactor of “Fugen” - Performance of Underwater-Cutting Stainless Plates and Recycled Abrasive - �

� � � � � � � � � � � � � � � � � � � � � � � � � � � � � � �

� � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � ��� ���� SHIN-ICHIRO MARUYAMA

��� �� SHIN-ICHI NISHIO

� � � �

�������������������������������(AWJ)��������������

�������������������������������������������t=150mm ��

�������������������������������

������������������200mm �������������� 200mm ��������

�������������������������������������������������

������������������

�������������������������������������������� �

It has been demonstrated that AWJ technique cut the mock-up double tubes of core internal and

stainless plate in 150mm thickness with the small cutting head. But, further improvement of cutting

performance and reducing secondary waste are expected. So tests of cutting stainless plate of over

150mm in thickness and using recycled abrasive were conducted. The followings were clarified; 1) The

possibility of underwater-cutting over 200mm in thickness, 2) The relationship between degradation of

cutting performance and recycled abrasive particle size.

Key Words: Fugen, Reactor Dismantlement, Abrasive Water Jet(AWJ), Underwater-cutting�

������

( � ) ���������������������

������25������2003� 3 ��������

�������������������������

����� 1) �

������������������������

������������ 224 �����������

��������������� ( � ��) 2) �����

�������������������������

�������������������������

�������������������������

�������������������������

�������������������������

���������������

���(224�)(Zr-Nb)

�������(224�) ������(224�)(SUS)

��������(���)

�������(���)������(224�)(SUS)

7m

�9m(Zry-2)

137

����������������� � 10�

2

������������ 1 ������������

�������������������������

� (AWJ) ���������������������

���������AWJ��������������

�������������������������

�����������������

�����������������������A

WJ �����������������������

�������������������������

�������������������������

������

������������������������

��������

� �

����� ����������

AWJ�����������������������

�������AWJ����������������

��������� ( ����������������

��� ) ���������������������

������ ( ���)3)���������������

���������������� (MAX t=150mm) ��

��������������AWJ���������

�������������������������

�������������������������

���AWJ�������������������

������������������ 1 ������

�������������������������

����� �������������

�������������������������

��������

���AWJ�������������������

�����������������������

�������������

������������������������

����������������AWJ�����

������ ( �� ) �������������

�������������������� ( ��

������ ) ����������������

������

���� ( ����� ) �������������

�����������������������

�����������������������

������������

���� �� AWJ ���������������������������

������

���

������

���

����� �� ��

���� ��

���

��������

����

��AWJ����

��� (SUS)

�����

��AWJ����

���� ���

������� �

138

���������������� AWJ ����������

3

� �

���� ��� ����������������

� � � �����

�������������AWJ���������

����������� ( �������� ) � 10mm

����������� (SUS304 t=150mm��� t=200

mm)�����������������������

���������������������

��������������������� (200M

Pa) ������������ (1.0kg/min)������

AWJ��������� ( ���� ) ��������

�������������������������

�������������������������

�������������������������

�������������������������

�������������

� � � �����

�������(SUS304)��������� ( ���)3)

���� SUS304t=150mm ����������� 3.6

mm/min ��� 4.8mm/min �������������

������������������ 6.0mm/min ��

�������������������������

�������������������������

�����������

��� SUS304t=200mm ����������� 1.8

mm/min ���������������������

���������������

��� � ���

������������������������

�������������������������

�������������������������

�������������������������

����

��������������������� ( ��

�� ) ��������������150mm�����

���������� t=200mm����������

1.8mm/min ��������������������

������������� ( � ��) ��������

� (1) ����������� (1) ��� t=200mm��

��������������� 2.4 mm/min �����

���

�����

(MPa) ��������

(mm) ������ (kg/min)

����(mm/min) ����

�� (mm) ����

�� (mm)

��

��

� 6.0 3.9 � ��

� 4.8 4.0 � 1.6 ��SUS304

t=150

� 3.6 4.3 � 1.6 ��

SUS304 t=200

200 10.0 1.0

� 1.8 4.4 � 1.6 ��

���� ����������������

����

1.8mm/min

t=200

mmt=150

mm

� � � �

3.6mm/min

����

6.0mm/min

����

4.8mm/min

������

�� � �����

�� � � ���

����

����

� � � � �

���

11

���� ������������

139

����������������� � 10�

4

���� ��������������������

����� ��AWJ����������2.5���

����

y=320.31x-0.5297 � � � � � � � � � � � � � (1) �

���� ��� ��������������

� �

��� �����

��AWJ������ ( � ��) ��������AWJ

����������� �2.5mm ����������

����� ( �������������������

9.3 ��� ) �������������������

���� �

������������������������

�������������������������

�����������(200MPa)���������

���� ��AWJ���������

���� ��AWJ������������

��� ��������

� ����������(mm) �

�����

������

� �������(kg)�

�����

� ���

( � / � )� mm/kg �

� ���� 0.8 � � 80 � 0.010

�����

� ����

� ����

0.1 � � 60 � 0.002

( ��� )=( �����)-(����� )

(1.0kg/min)��������������������

�������������������������

�������������������������

�������������������������

�������� �3.5mm �������������

��������������

� � � �����

�������������������������

����������������2.5mm �� 3.3mm�

����������������0.8mm������

�������������������������

�������������������������

�������������������������

��������������������0.1mm��

�������

������������������������

������� 1kg ���0.010mm���������

������������������������ 1

kg���0.002mm������� , ���������

��������������������������

���

y = 320.31x-0.5297

0

50

100

150

200

250

300

0 10 20 30 40 50

�����mm/min�

��

���

mm�

������

���

���

���

����

��AWJ

�����

����������

( ��� )

����� 3.3mm

����� 2.5mm

�����

����� 2.5mm

( ��� )

����� 2.6mm

( ��� )( ��� )

140

���������������� AWJ ����������

5

����� ����� ( ���� )

� � � ���

�������������������AWJ���

�������������������������

�������������������������

��������������������������

�������������������������

����������AWJ�������������

�������������������������

��������������AWJ����������

�������������������������

������������

���������������������

� � � �����

���������������250~600µ�����

�������������������������

����� 3 �������������������

�������������������������

��������������������������

�������������������������

����������

������������������������

�����������(200MPa)����������

�� (1.0kg/min)������������������

�������������������������

�������������������������

�������������������������

���

� � � �����

�������������������������

����250~600µ�����������������

���������������95%(0.18/0.19rpm)��

�������������������������

�����������

�����250~600µ���������������

�������������������������

�������������������������

�����250~600µ����������������

���0~600µm������������85� (0.16/

0.19rpm) ����������

���0~150µm�����������������

�������������������������

�������������������������

�������

������ ��� ������� ����

� �������������(kg/min) �

� ����� (MPa) �

��������

������ (rpm)

��� �����

� � 250 � 600µm�������� � 0.19

1:1 � ����&�����

� � 250 � 600µm�� 1:2 0.18

��� �����

� � 250 � 600µm�������� � 0.19

��� �����

� � 0 � 600µm � ������� � 0.16

SUS304 ���

��� �����

� � 0 � 150µm�������� �

1.0 � 200

������ �����

���� ��������������������

� � � �

0 � 600µm 0 � 150µm

141

����������������� � 10�

6

���� �������� �

� � � ���

�������250~600µ�������������

�������������������������

250~600µ���������������������

�������������������������

����������������� 5% ������

�������������������������

�������������������������

�������������������������

��������������

��������������250~600µm�0~600µm

�������������0~600µm�15������

�������������0~150µm��������

���������������� ( ��� ) ����

�������������������������

������������ ( ��� ) ��������

��������������

�����������������250µm����

���������������250µm�������

����������������������

0~150µm��������������������

��������������������������

�������������������������

�������������������������

�������������������������

�������������������������

�������������������

�����

������������������������

�����

�� �������������������

��AWJ���������������

(SUS304 t=200mm)����� 1.8mm/min ����

���������

����������������������

����AWJ�����������������

�����������������������

��

�� �� AWJ ����������

����������������������

�����������������������

AWJ���������������������

�������������������

����������������������

�����������������������

���������

�� ���������������������

250µm������ ( ��� ) ��������

������������������� 250µm

�����������������������

����������������

����������������������

���������������

�����������������������AWJ

��������������� ( � ) �������

���� ����� ����������������

������ ���������� ������ ���

�������������������������

������������������������

� �

�����

1)Yasuyuki Nakamura, Kouichi Kikuchi, Yoshitugu Morisita,

Tatsuo Usui, Daisuke Ogane �Applicability Examination

and Evaluation of Reactor Dismantlement Technology in th

e Fugen-Examination of Double Tubes Cutting by abrasive

Water Jet- Proceeding of 14th International Conference of

Nuclear Engineering,ICONE14-89380,2006.7

2)������������������������

��� � ��������������������

�������� ( �� 4)� ��������2008�

��������N06,2008.9 �

3)�����������������������A

WJ ����������������������

(Journal of the RANDEC)No,38,2008.11

4)�������������������������

���AWJ���������� � ���������

�������������� � ���������

��������� No,8,2010.10 �

���

���

���

����

�� AWJ

������

����

�����

142