AVT2000D is a portable and compact in size magnetic installation vehicle tracking device which is...
-
Upload
lesley-leonard -
Category
Documents
-
view
214 -
download
0
Transcript of AVT2000D is a portable and compact in size magnetic installation vehicle tracking device which is...
AVT2000D is a portable and compact in size magnetic installation vehicle tracking device which is easy in mounting and hiding to where there is the metal material in a vehicle. With the superior GPS, GSM/GPRS modules on board, AVT2000D could be used as the security tracking, for vehicle security, home security or any in secret monitoring application.
AVT2000D also provides a extension port for integrating with the peripheral devices, such as temperature sensor, CCTV, Wifi, iButton, or RFID solution.
Support GSM 850/900/1800/1900 MHZ
AVT-2000 Series
APPLICATIONS
1. Fleet management2. Asset tracking.3. Equipment monitoring.4. Marine tracking .5. Container tracking.
Main Features
Specification
1.Communication by Voice, CS Data, SMS, GPRS UDP/TCP for 2G.2.Communication by Voice, SMS, Edge, UMTS and HSDPA for 3G3.Configurable Tracking & Logging mode, by Time interval, Distance interval,
Speeding changes, Heading changes and IG status.4. User Defined Interface (UDI), expandable for customization. 5.GPS/GSM antenna tempering alert 6.GSM Jamming alert (optional). 7.Geo-fencing control. 8.Mileage report.9.Power Low/Lost alert 10.Towing away alert. 11.Speeding alert 12.Power Management13.Roaming preference settings.14.Maximum 100 settings in user defined reports.15.Internet Surfing via USB connection.16.Configuration over the air.17.Firmware upgrading over the air.
1.Dimensions (L x W x H): 115x75x32 mm.2.asing : ABS plastic.3.GPS Module:66 channels high sensitivity GPS receiver.4.Communication:Quad-band 850/900/1800/1900 MHz in 2G GSM/GPRS or Tri-band 850/900/2100 MHz in 3G UMTS/HSDPA.5.Power Source: DC 8-40V,Power Consumption in sleeping mode: • <10uA@ DC 3.7V, back-up battery power supply condition • <4mA@ DC 12V, main power supply condition.6.Memory Capacity:4MB,storage over 100,000 waypoints7.System Setting:100 user defined events.8.Device Ports:4 input ports, with 2 positive triggering and • 2 negative triggering (includes 2 analog) • 4 output ports, 4 negative triggering • 1 serial port, TTL/RS232 switching by command • 1 mini USB port for configuration.9.GPS Antenna: External (SMA connector type) and Internal.10.GSM Antenna: External (SMA connector type) and Internal.11.Motion Sensor: Tri-axial acceleration sensor.12.Back-up Battery: Lithium battery with 860mAH capacity.13.Operating Temperature: -20°C ~ 80°C (without back-up battery condition).14.User Defined Interface( UDI): Optional.15.4GHz RF Transceiver: Optional
Standard:1. External GSM Antenna2. External GPS Antenna3. Power/Input/Output Cable4. Serial Cable.
Optional1. Water Proof Casing2. Input/Output Extension Box3. Audio Box and RF Dialer4. RS232 Extension Hub5. Trailer Tracker Kit6. Radio Beacon7. 4-button Remote Controller8. Video Camera9. RFID Reader and Tag.10. iButton11. Wireless and Wired Temperature Sensor12. Wi-Fi 802.11b/g Modem13. OBDII Scan Tool
Accessories & Peripherals