AVL DITEST SCOPE · They guide the user through a professional fault diagnostics process in three...
Transcript of AVL DITEST SCOPE · They guide the user through a professional fault diagnostics process in three...
FUTURE SOLUTIONS FOR TODAY
AVL DITEST SCOPEPrecision automotive measurement device
Precise resultsin record time.
The quickest wayto reliable results.
AVL DITEST SCOPE – AUTOMOTIVE MEASUREMENT UNITS
The number of electronic components in motor vehicles has multiplied tenfold over the last 15 years; they have become essential to the overall functioning of today's
vehicles. Analysing these components is a complex and challenging task: the AVL DiTest Scope models 1200, 1400 and 8400 are the perfect precision measurement devices for the job. They guide the user through a professional fault diagnostics process in three simple steps. Being able to precisely locate faults will save you time and materials as you can pinpoint the exact component that needs to be replaced. AVL DiTEST – the best way to quickly and reliably detect vehicle faults.
INTELLIGENT MEASUREMENTS THAT SAVE YOU TIME, MONEY AND STRESS.
AVL DiTEST Scope – these intelligent workshop measurement systems ena-ble fast andprofessional fault diagnostics, examining electronic components in order to identify the clear cause of an existing fault. Their robust technol-ogy and range of accessories guarantee precise measurement of various en-gine types as well as electronic vehicle components. Thanks to the device's user-friendly input and operating software, staff using the digital, high-reso-lution two-/four-channel Scope module for automotive signal measurements require no additional training. The AVL DiTEST Scope is a reliable and highly accurate device for your measurement needs.
STATE-OF-THE-ART HARDWARE: ▬ galvanic isolation between the measurement unit and PC prevents
short circuiting ▬ differential measurement channels mean channels operate without
cross-interference ▬ stimuli generator for active signal application ▬ active probe supply with colour guide aids connection of sensor cables ▬ automatic zero adjustment and degaussing ▬ guaranteed five-year measurement accuracy without the need
for calibration ▬ automotive sensors ▬ stable and ultra-light magnesium housing with rubber protectors
for challenging workshop environments.
SOPHISTICATED SOFTWARE: ▬ intuitive and self-explanatory operating system ▬ over 400 pre-configured measurement functions: obtain reliable results
quickly and easily ▬ automatic sensor recognition with colour guide ensures setting and
connection accuracy ▬ all measurements include step-by-step instructions, connection guides
and detailed descriptions ▬ informative display and evaluation of curves thanks to automatic
measurement range configuration ▬ direct reference curve comparison for immediate measurement review ▬ curve recording function to register signals.
GALVANIC ISOLATION BETWEEN DITEST SCOPE AND PC
Galvanic isolation prevents the AVL DiTest Scope components from short circuiting as a result of spark overs or ground loops. As such, ground loops which may occur when measurement units are connected to the mains (e.g. plug sockets) or a PC are avoided. This prevents damage to components within the vehicle or the measurement device.
Workshop application:
During troubleshooting, a battery charger is connected to the vehicle and the PC is plugged into the mains. In conventional measurement units, earthed charging devices and PC power supply lines result in a ground loop which can lead to erroneous measurements or component damage. Galvanic isolation prevents this from occurring.
DIFFERENTIAL MEASUREMENT CHANNELS
Differential channels allow each meas-urement to be taken at 40 MS/s using the entire measurement range. Each channel can be used independently, allowing electricity, resistance and voltage measurements to be carried out at the same time. Short circuits and erroneous measurements during the process can thus be avoided.
Workshop application:
In practical terms, this means that channel 1 could be used to measure battery voltage and channel 2 to measure the power voltage supplied to the lambda sensor heater. When non-differential measurement chan-nels are used, incorrect polarity may result in short circuiting. AVL DiTEST Scope prevents this from happening.
THE COMPLETE SOLUTION: AVL DITEST SCOPE 8400
Fully integrated four-channel measurement unit featuring touchscreen and infotainment testing. The Scope 8400 consists of a 'Rugged Windows 7 PC' with a fixed measurement unit and can be integrated into a networked work-shop using SCPI commands. Test results can be accessed directly via the display using a simple user interface.
PRODUCT DESCRIPTION: ▬ galvanically isolated inputs ▬ four differential oscilloscope measurement channels, each at 40 MS/s ▬ touchscreen-operated measurement unit with intuitive GUI ▬ active probe supply with colour guide ▬ fully integrated infotainment test (Bluetooth, USB, Wi-Fi, video) ▬ Windows® 7 Tablet PC ▬ voltage measurement up to 500 V AC/DC ▬ current measurement from 1 mA to 1800 A AC/DC ▬ resistance measurement from 0.1 Ω to 10 MΩ ▬ pressure measurement from -1 bar to 100 bar ▬ temperature measurement from -20°C to 200°C ▬ fully-functional signal generator for voltages between -20 V and +40 V ▬ two integrated, high-resolution pressure sensors (e.g. for cylinder syn-
chronisation on motorbikes) ▬ guided measurement steps for faultless diagnostics.
OUTSTANDING BASIC MODEL: AVL DITEST SCOPE 1200
This two-channel measurement unit features only the most essential func-tions, offering easy handling and a high degree of mobility. Measurement results can be accessed by connecting the device to a PC or tablet.
PRODUCT DESCRIPTION: ▬ galvanically isolated inputs ▬ two differential oscilloscope measurement channels, each at 40 MS/s ▬ active probe supply with colour guide ▬ voltage measurement up to 600 V AC/DC ▬ current measurement from 1 mA to 1800 A AC/DC ▬ resistance measurement from 0.1 Ω to 10 MΩ ▬ resolution: Scope 14 bit, digital multimeter 16 bit ▬ full measurement range for each channel, sampling rate
THE PERFECT BALANCE: AVL DITEST SCOPE 1400
Digital, high-resolution four-channel Scope module for automotive signal measurement. Measurement results can be accessed by connecting the device to a PC or tablet.
PRODUCT DESCRIPTION: ▬ galvanically isolated inputs ▬ four differential oscilloscope measurement channels, each at 40 MS/s ▬ active probe supply with colour guide ▬ over 400 pre-defined settings ▬ voltage measurement up to 600 V AC/DC ▬ current measurement from 1 mA to 1800 A AC/DC ▬ resistance measurement from 0.1 Ω to 10 MΩ ▬ SPI for synchronous serial data buses ▬ signal generator: 800 mA, -20 V to + 20 V, to 1 MS/s ▬ resolution: Scope 14 bit, digital multimeter 16 bit ▬ power supply through 14 V on-board system (cigarette lighter or car
battery) ▬ full measurement range for each channel, sampling rate
ACCESSORIES FOR THE AVL DITEST SCOPE 1200 AND 1400
▬ cigarette lighter and vehicle battery supply
Secondary ignition measurement:
▬ -20°C to 200°C temperature sensor: precise and extremely fast (for compatible AC unit switching points)
▬ multisensor incl. stroboscope function
▬ -1 bar to 100 bar oil- and fuel- resistant pressure sensor
Current measurement probes
▬ current probe: 60A ▬ current probe: 600A ▬ current probe I100 Standard ▬ current probe I150 High End ▬ current probe I1800
Secondary ignition measurement:
▬ trigger probe ▬ KV clip ▬ ignition adapter set
▬ AVL DiTEST DPM 800 relative cylinder pressure measurement.
AVL DITEST SCOPE SOFTWARE.
The proven AVL DiTEST Scope software and user interface is intuitive for op-erators and can be used without specific training. All measurements include step-by-step instructions, connection guides and detailed descriptions. With automatic sensor recognition and a colour guide, the unit ensures that no connection or setting errors occur.
Colour guide in software and hardware guides the user through automatic sensor recognition.
SOFTWARE FOR THE RIGHT RESULTS ▬ intuitive usability for a wide range of display and output devices ▬ designed for touchscreen operation ▬ reference curves (correct signals) for each pre-defined measurement
scenario ▬ user-defined reference curves can be set and saved in just a few
simple steps ▬ all settings pre-installed: no manual settings required ▬ over 400 pre-set measurement settings mean reliable results quickly
and easily ▬ automatically scaled reference curve diagram allows measurements to be
compared directly ▬ measurement recorder and management function allows previous results
to be displayed and sequences re-played ▬ view up to 100 screens of your signal history ▬ play back recorded signals and send measurement signal curves ▬ different live data can be easily read in one go ▬ clear and exact information saves time.
WE'LL HELP YOU GET THE RIGHT RESULTS
Detailed explanations and measurement descriptions guide user through measurement adapter connection.
Automatic measurement configuration and accessible reference curves offer an immediate target performance comparison.
Menu helps you choose the right measurement with several industry-relevant pre-set procedures.
DIAGNOSTICS IN THE FIELD
Each channel can be used independent of the others, which means that different measurements can be carried out at the same time. Galvanic isolation protects the measurement components from short circuiting as well as from spark overs and ground loops. This ensures that neither the vehicle nor the device's hardware is damaged during the procedure.
Measurement of modern ignition systems, no additional adapter needed. Immediate evaluation of all relevant nominal values (includes reference curve comparison).
Simultaneously measure resistance (curve and nominal value), voltage curve and current curve for injection valves.
Oscilloscope display: battery voltage andlambda heater supply. Multimeter display: battery voltage and lambda heater supply.
MEASUREMENT OF MODERN IGNITION SYSTEMS.
MEASUREMENT OF RESISTANCE, VOLTAGE AND POWER CURVES FOR INJECTION VALVES.
SIMULTANEOUSLY MEASURE BATTERY VOLTAGE AND VOLTAGE SUPPLY TO LAMBDA SENSOR.
www.kuffe
rath.at
Publisher:Headquarters: AVL DITEST GmbH Alte Poststraße 156, 8020 Graz, AUSTRIA, Tel. +43 316 787-0, Fax -1460, [email protected]
German branch: AVL DITEST GmbH Würzburger Straße 152, 90766 Fürth, GERMANY, Tel. +49 911 47 57-540, Fax -477www.avlditest.com
PA7426E09/2015. May be subject to change
AVL DITEST – SCOPE PRODUCT PACKAGES
In order to meet your individual requirements, we offer three different product packages. Each measurement unit has been specially developed for demanding daily use in the workshop.
▬ Robust, waterproof and dust-proof ▬ Impact resistant ▬ Oil- and acid-proof
AVL DiTEST Scope 8400 incl. PCMains adapter with power cordUSB cableLAN cableVideo cable2 x URD cable, red/black2 x probe, red 2 x probe, black 2 x crocodile clamp, red 2 x crocodile clamp, blackSet of stimuli cables
Current probe I150 High End Current probe I1800Temperature sensor: -20°C to 200°CPressure sensor: -1 bar to 100 bar2 x connection tube for two internal low pressure sensors (-0.8 to 2 bar)Trigger probeKV clipCD manualDevice carry casePackaging
AVL DiTEST Scope 1400 moduleMains adapter with power cordCigarette lighter and vehicle battery supply cableUSB cable4 x URD cable4 x probe, red 4 x probe, black 4 x crocodile clamp, red 4 x crocodile clamp, blackSet of stimuli cables
Current probe I150 High End Current probe I1800Temperature sensor: -20°C to 200°CPressure sensor: -1 bar to 100 barTrigger probeKV clipSecondary ignition adapter setCD manualDevice carry casePackaging
AVL DiTEST Scope 1400 moduleMains adapter with power cordUSB cable4 x URD cable4 x probe, red 4 x probe, black 4 x crocodile clamp, red
4 x crocodile clamp, blackSet of stimuli cablesCurrent probe I100Current probe I1800CD manualDevice carry casePackaging
AVL DiTEST Scope 1200 moduleMains adapter with power cordUSB cable2 x URD cable2 x probe, red 2 x probe, black 2 x crocodile clamp, red
2 x crocodile clamp, blackCurrent probe: 600ACD manualDevice carry casePackaging
AVL DITEST SCOPE 1400 INCL. STIMULI AVL DITEST SCOPE 1200
AVL DITEST SCOPE 8400 INCL. COMPLETE PC SET
AVL DITEST SCOPE 1400 INCL. COMPLETE STIMULI SET