AVK Valves
-
Upload
miroslav-aleksic -
Category
Documents
-
view
547 -
download
23
description
Transcript of AVK Valves
T h e A V K G r o u pA V K G l o b a l p r o d u c t o f f e r i n g
Pr ice L i s t 2007
January 2007
AVK
AVK is one of the leading valve manufacturers for the water, gas and
sewage industries as well as Fire Protection worldwide.
Our product programme comprises a large range of valves, hydrants,
pipe fittings and accessories, each complying with the highest
standards of safety and durability.
Today, we are the only producer offering gate valves to most of the
common national and international standards such as ISO, CEN,
DIN, NF, BS, AWWA, JWWA, SABS, AS and GOST. Our global
position ensures that we are able to give you, your partners and
your customers the quality products you require.
product development
Market proximity has always been at the core of AVK's strategy;
close contact with the end-user ensures close monitoring of the
market and constant adaption and development of the product
programme to meet with market requirements. This takes place in
our development department in Denmark, an advanced technology
centre, where ideas and suggestions from many different countries
are gathered and where existing products are continually updated
and tested. In co-operation with the end user, new products are field
tested before the final market launch, thus achieving the best result
in the individual markets.
Sewage Treatment
Gate valves, knife valves, air valves,
check valves, butterfly valves etc.
Fire Protection
Gate valves and fire hydrants
Gas Supply
Gate valves and accessories,
fittings, plug valves, flow
limitors etc.
AVK’s four main segments:
Water Supply
Gate valves and accessories,
air valves, swing check valves,
hydrants, butterfly valves etc.
Introduction
AVK 's P roduc t P rogramme
meets Your Requ i rements
AVK - Supp l i e r o f H igh
Qua l i t y P roduc ts
production
Production takes place in Denmark, the UK,
the Netherlands, Germany, France, Poland,
USA, Australia, China and Saudi Arabia.
AVK's products are also produced under
licence in several other countries.
Stock control and distribution to end users
are handled through a wide network of sales
companies, agents and dealers in more than
85 countries. These service the end-user,
allowing AVK to monitor market changes and
keep abreast of customer requirements.
Quality
AVK's products are marked by high,
consistent quality, competitive prices and
durability in line with market requirements.
This calls for strict quality control of the
production processes from beginning to
end and therefore AVK has been certified
according to ISO 9001.
When it comes to quality at AVK,
nothing is left to chance.
Approved
ApprovedListed
Listed
AVK Approvals and listings:
Introduction
DVGW
NF
KIWA
Introduction
Gate
valve
s
2006-01-01
Products for water according to DIN Price list 2006
Type AVK ref. nos. DN PN Weight Units Deliv.- Gross price mm bar kg pr. pallet code Euro
Series 06/30
StandardFlanged gate valveShort length DIN F4Ductile ironFlanges/drilling according to ISO/ENEPDM rubber wedgeEpoxy coatinginternally and externallyClosing direction: CTC or CTOPN 10/16DN 40-300
CTC CTO 06-040-30014 06-040-30114 40 10/16 10 36 A 198 06-050-30014 06-050-30114 50 10/16 11 36 A 208 06-065-30014 06-065-30114 65 10/16 14 30 A 290 06-080-30014 06-080-30114 80 10/16 18 20 A 290 06-100-30014 06-100-30114 100 10/16 23 20 A 342 06-125-30014 06-125-30114 125 10/16 31 15 A 588 06-150-30014 06-150-30114 150 10/16 46 10 A 588 06-200-30004 06-200-30104 200 10 65 10 A 1,024 06-200-30014 06-200-30114 200 16 65 10 A 1,076 06-250-30004 06-250-30104 250 10 102 8 A 1,606 06-250-30014 06-250-30114 250 16 102 8 A 1,686 06-300-30004 06-300-30104 300 10 149 6 A 2,244 06-300-30014 06-300-30114 300 16 149 6 A 2,356 DIN 1882 drilling 06-080-30036 80 10 18 20 B 310 06-100-30036 100 10 23 20 B 367 06-125-30036 125 10 31 15 B 628 06-150-30036 150 10 46 10 B 630 06-200-30036 200 10 65 10 B 1,090
06-040-34016 40 10/16 10 36 B 214 06-050-34016 50 10/16 11 36 B 224 06-065-34016 65 10/16 14 30 B 307 06-080-34016 80 10/16 18 20 B 318 06-100-34016 100 10/16 23 20 B 371 06-125-34014 125 10/16 31 15 B 621 06-150-34016 150 10/16 46 10 B 650 06-200-34006 200 10 65 10 B 1,161 06-200-34016 200 16 65 10 B 1,213 06-250-34006 250 10 102 8 B 1,771 06-250-34016 250 16 102 8 B 1,851 06-300-34006 300 10 149 6 B 2,419 06-300-34016 300 16 149 6 B 2,579
Series 06/34
Flanged gate valveShort length DIN F4Ductile ironEPDM rubber wedgeStem AISI 316 steel/DIN 1.4404Flanges/drilling according to ISO/ENEpoxy coatinginternally and externallyClosing direction: CTCPN 10/16DN 40-300
Available on request:- RG5 stem nut
8
Series 06/30
Flanged gate valveShort length DIN F4Ductile ironFlanges/drilling according to DIN 1882EPDM rubber wedgeEpoxy coatinginternally and externallyClosing direction: CTCDN 80-200
DIN
hoW To uSe ThIS prICe LIST:
The price list is divided into four sections related to the main standards and a fittings chapter:
DIN - AVK International A/S
BS - Aqua-Gas AVK Ltd.
AWWA - American AVK Company
AS - AVK Australia Ltd pty
Ductile iron fittings
each section is again divided into four segments:
WATer SuppLY
SeWAGe TreATMeNT
FIre proTeCTIoN
GAS SuppLY
hoW To FIND The rIGhT proDuCT:
1. Look for standard
2. Look for segment
3. Look for type of product
4. Delivery- A = max. 2 weeks code: B = max. 8 weeks C = > 8 weeks
hoW To FIND Your AVK pArTNer:
Look at the map. Find your colour code and matching AVK sales company.How to contact: please look at the last pages to find addresses, phone numbers, e-mails etc.
Continental Europe, Russia, Northern and Central Africa, South Eastern Europe - AVK International A/S
AVK Sales Companies: AVK Norge AS AVK Mittelmann Armaturen GmbH AVK Nederland BV AVK Belgium NV AVK Armadan Sp. z o.o. AVK FRANCE S.A. AVK Válvulas, S.A. UK and Ireland - Aqua-Gas AVK Ltd.
North America - American AVK Company
G e o g r a p h i c a l re g i o n s c o v e re d b y t h e AV K G ro u p
Austral Asia - AVK Australia pty Ltd
The Arabian Peninsula - Saudi Valves Manufacturing Co. Ltd.
Latin America and the Caribbean - AVK overseas
Asia - AVK overseas
China and Hong Kong - AVK China
Southern Africa - AVK Valves Southern Africa (pty) Ltd.
Designed according to DIN 3352 part 4D
IN
Basic DIN design standard 2007-07-10 10:47 CET
Water
02/60, Flanged gate valve (std.),Face to face DIN F5, Ductile iron
1
02/67, Flanged gate valve, Faceto face DIN F5, Ductile iron, RG5stem nut
2
02/68, Flanged gate valve, Faceto face DIN F5, Ductile iron,Exchangeable RG5 stem nut
2
02/75, Flanged gate valve, Faceto face DIN F5, Ductile iron,Exchange. stem sealing, NF
3
02/76, Flanged gate valve, Faceto face DIN F5, Ductile iron,Pos-indicator & handwheel
4
06/30, Flanged gate valve (std.),Face to face DIN F4, Ductile iron
4
06/34, Flanged gate valve, Faceto face DIN F4, Ductile iron, AISI316 stem
5
06/35, Flanged gate valve withPin Indicator, Face to face DINF4, Ductile iron
5
06/75, Flanged gate valve, Faceto face DIN F4, Ductile iron,Exchangeable stem sealing, NF
6
06/85, Flanged gate valve, Faceto face DIN F4, Ductile iron, RG5stem nut
7
15/42, Flanged gate valveprepared for actuator, Face toface DIN F4, Actuator on request
7
15/72, Flanged gate valveprepared for actuator, Face toface DIN F5, Actuator on request
8
20/30, Flanged gate valve , Faceto face DIN F5, Ductile iron,Internal enamel
8
20/35, Flanged gate valve , Faceto face DIN F5, AISI 316 stem,Ductile iron, Internal enamel
8
26/00, Flanged gate valve, Faceto face DIN F4, Ductile iron
9
55/30, Flanged gate valveresilient seated, Long length F5
9
55/35, Flanged gate valve,resilient seated w. Powersaver,Long length F5
10
01/70, Socket gate valve, SupaPlus tensile couplings for UPVC,Ductile iron
11
12/51, Exchange valve excl.combi flange
11
32/10, Gate valve with spigotends for asbestos cement pipesto ISO class 18
12
32/40, Gate valve with longspigot ends for cast iron pipes toISO 2531 class 18
12
32/60, Gate valve with spigotends for asbestos cement pipesto ISO class 18, AISI 316 stem,
13
32/70, Gate valve with spigotends for cast iron pipes to ISO2531 class 18
13
38/80, Gate valve withflange/PE-pipe, Ductile iron
13
36/80, Gate valve with PE-pipes,Ductile iron
14
01/80, Socket gate valve, EUROsocket ends, for UPVC, Ductileiron
14
33/00, Gate valve with socketends for cast iron pipes to ISO2531
16
18/40, Combi-Tee with flangedends, Ductile iron
16
18/70, Combi-cross 4 outletflanged, Ductile iron
16
Designed according to DIN 3352 part 4
DIN
Basic DIN design standard 2007-07-10 10:47 CET
18/80, Combi-cross 3 outletflanged, Ductile iron
17
18/89, Extension piece for AVKcombi-cross
18
18/93, Ball valve for AVKcombi-cross
19
04/10, Surface box, Fixed streetcover, Grey cast iron, Distancering and square in ductile iron
19
04/11, Surface box, Floatingstreet cover, Ductile iron
19
04/12, Surface box, Universalstreet cover for AVK telescopicext. spindle, Ductile iron
19
04/20, Stem cap for extensionspindles
20
04/22, Stem cap for valves20
04/23, Stem cap for valves20
04/05, Stem extension for serviceconnection valves, Fixed length,Key adaptor #14-22, PC1 = Pipe
20
04/07, Stem extension for serviceconnection valves, Telescopic,Key adaptor #14-22, L8 = Actual
21
04/15, T-key for extensionspindles
21
08/00, Handwheel21
04/02, Stem extension for gatevalves, Fixed length, Keyadaptor #23-32, PC1 = Pipe cover
21
04/04, Stem extension for gatevalves, Telescopic, Key adaptor#23-32, L8 = Actual length
22
03/85, Service conn. valve withtensile resistant socketconnection/outside thread
23
03/65, Service connection valve,Tensile resistant screwcouplings for PE-pipes, Ductile
23
16/00, Brass service connectionvalve with T-top and brasstensile couplings
23
16/05, Brass service connectionvalve with AVK top and tensilecouplings
24
11/30, Angle service connectionvalve w. external thread/tensileresistant socket joint
24
16/29, Service connection valvewith socket joints/BSP thread,POM
24
16/80, Service connection valvewith PE-pipes, POM
25
03/00, Service connection valve,Internal thread, Ductile iron
25
03/10, Service connection valve,Internal thread, Ductile iron
25
03/40/60, Service connectionvalve for sidetapping, Ext./int.thread and tensile socket joint,
26
03/30, Service connection valve,Push in sockets for PE-pipes,Ductile iron
26
16/50, Service connection valvewith tensile resistant socketjoints, POM
26
03/90, Service connection valvewith PRK system for PE-pipes,Ductile iron
27
03/93, Service connection valvewith PRK system for PE-pipes,Ductile iron
27
16/20, Brass service connectionvalve with T-top and PRKcouplings
27
Designed according to DIN 3352 part 4D
IN
Basic DIN design standard 2007-07-10 10:47 CET
16/25, Brass service connectionvalve with PRK-couplings
28
16/90, Service connection valvewith PRK-couplings, POM
28
16/01, Service connection valve,PRK/external conical pipethread, POM
28
11/00, Angle service connectionvalve, External/internal thread,Ductile iron
29
701/10, Automatic air valve,Single acting
29
701/20, Automatic air valve,Single acting
29
701/30, Single acting air valve,Inlet flange
29
701/40, Combination air valve,Double acting
30
701/50, Combination air valve,Double acting
30
701/60, Combination air valve,Double acting
30
701/84, Underground air valveinstallation system
30
29/40, Underground fire hydrantto EN 1074-6, PN 16
31
09/20, Fire hydrant, Aboveground, Stortz-Hose-coupling,Type B, Aluminium
31
09/30, Fire hydrant, Aboveground, Stortz-Hose-coupling,Type B, Ductile iron
32
09/50, Fire hydrant, Aboveground, Manual drainage, TypeA, Aluminium
32
84/70, Fire hydrant DN 80, aboveground, Stainless steel, ModelP6, PN 16
32
41/60, Swing check valve withfree shaft end
33
41/23, Swing check valve leverand weight kit
33
41/32, Swing check valve springkit
33
10/00, Tapping saddle for PVCand PE-pipes, Metric size
33
10/10, SMHM universal tappingsaddle for service ball valve
35
05/01, Combi-flange for D.I. PVC-and PE-pipes
35
05/02, Standard sealing ring forPE-pipes
36
05/03, Standard sealing ring forductile iron pipes
36
05/04, Non-tensile resistantsealing ring for D.I.-pipes, Acc.to EN 545
36
05/05, Tensile resistant sealingring for PVC-ppipes
36
05/06, Tensile resistant sealingring for D.I.-pipes, Acc. to EN 545
37
05/07, Tensile resistant sealingring for PE-pipes
37
05/08, Support bush for PE-pipes37
51/03, SMHM servive ball valvefor PE- and uPVC-pipes, Straightbore, Body in bronze, NF
38
Designed according to DIN 3352 part 4
DIN
Basic DIN design standard 2007-07-10 10:47 CET
51/04, SMHM servive ball valveuniversal type forPE/uPVC-pipes, Straight bore,
38
SEWAGE
02/76, Flanged gate valve, Faceto face DIN F5, Ductile iron,Pos-indicator & handwheel
39
06/34, Flanged gate valve, Faceto face DIN F4, Ductile iron, AISI316 stem
39
06/80, Flanged gate valve, Faceto face DIN F4, Ductile iron
39
06/84, Flanged gate valve, Faceto face DIN F4, Ductile iron, AISI316 stem, NBR
40
06/89, Flanged gate valve withrising stem, Face to face DIN F4,Ductile iron
40
15/42, Flanged gate valveprepared for actuator, Face toface DIN F4, Actuator on request
40
15/72, Flanged gate valveprepared for actuator, Face toface DIN F5, Actuator on request
41
715/00, Accessories forpneumatic controlled valve
41
715/30, Pneumatic controlledvalve, with solenoid valve kit andprox. swit., Double-acting, Face
41
701/33, Kinetic air valve, Singleacting Large orifice
42
701/70, Combination air valve,Double acting
42
701/75, Short combination airvalve, Double acting, Reinforcednylon
42
702/10, Knife gate valve withnon-rising stem and handwheel
42
702/20, Knife gate valve withrising stem and handwheel
43
702/30, Knife gate valve with withquick operation lever
43
702/40, Knife gate valve withpneumatic double-actingactuator
43
702/50, Knife gate valve with ISOflange prepared for el-act. andrising stem
43
53/35, Ball check valve withflanges
44
53/30, Ball check valve with BSPthreads
44
53/40, Ball check valve instainless steel AISI 316 with BSPthread
44
41/60, Swing check valve withfree shaft end
44
41/61, Swing check valve withclosed bushings
45
41/23, Swing check valve leverand weight kit
45
41/32, Swing check valve springkit
45
GAS
02/70, Flanged gate valve, Faceto face DIN F5, Ductile iron
46
02/74, Flanged gate valve, Faceto face DIN F5, Ductile iron, PG3
46
06/70, Flanged gate valve, Faceto face DIN F4, Ductile iron
46
Designed according to DIN 3352 part 4D
IN
Basic DIN design standard 2007-07-10 10:47 CET
06/74, Flanged gate valve, Faceto face DIN F4, Ductile iron, PG3
47
36/90, Gate valve with PE-pipes,Ductile iron
47
46/64, Gate valve with spigotends, face to face S8, PG3
48
46/70, Gate valve with spigotends, PG2
48
46/74, Gate valve with spigotends, PG3
49
03/25, Service conn. valve,Internal thread, Ductile iron, PN4 PG 2
50
FIRE PROTECTION
06/35, Flanged gate valve withPin Indicator, Face to face DINF4, Ductile iron
51
25/46, Flanged gate vale withrising stem OS&Y, AWWA C509
51
45/5, Resilient Seated DuctileIron Gate Valve, 250 PSI, FLFL
52
06/37, Grooved end gate valvewith Pin Indicator according toAWWA C 606, Ductile iron
52
Gross priceEUR
Deliv.-code
Units pr.pallet
Theoreticalweight kg
PN bar
DN mm
AVK ref. nos.Type
Series 02/60
Flanged gate valve(std.)Face to face DIN F5Ductile ironEPDM rubber wedgeStandard flangedrilling to ISO7005-2, EN1092-2:1997Epoxy coatedaccording to DIN30677-2 and GSKguide linesClosing direction:CTCDN 40-500
Note:# Valve having an increased bore (400 mm)## Valve having a reduced bore (400 mm)
003
206,00A241110/164002-040-6001214,00A201210/165002-050-6001300,00A171510/166502-065-6001300,00A141910/168002-080-6001354,00A122510/1610002-100-6001610,00A93310/1612502-125-6001610,00A84910/1615002-150-6001
1.060,00A6701020002-200-60001.114,00A6701620002-200-60011.662,00A41101025002-250-60001.746,00A41101625002-250-60012.322,00A21601030002-300-60002.438,00A21601630002-300-60014.826,00A23201035002-350-60004 #)5.066,00B23201635002-350-60014 #)6.508,00A23421040002-400-600066.834,00A23421640002-400-600167.028,00B13601045002-450-60004 ##)7.379,00B13601645002-450-60014 ##)9.762,00B14171050002-500-60004 ##)
Gross priceEUR
Deliv.-code
Units pr.pallet
Theoreticalweight kg
PN bar
DN mm
AVK ref. nos.Type
Series 02/60
Flanged gate valve(std.)Face to face DIN F5Ductile ironEPDM rubber wedgeStandard flangedrilling to ISO7005-2, EN1092-2:1997Epoxy coatedaccording to DIN30677-2 and GSKguide linesClosing direction:CTODN 40-500
Note:# Valve having an increased bore (400 mm)## Valve having a reduced bore (400 mm)
004
206,00241110/164002-040-6011214,00B201210/165002-050-6011300,00B171510/166502-065-6011300,00B141910/168002-080-6011354,00B122510/1610002-100-6011610,00B93310/1612502-125-6011610,00B84910/1615002-150-6011
1.060,00B6701020002-200-60101.662,00B41101025002-250-60102.322,00B21601030002-300-60104.826,00B23201035002-350-60106 #)5.066,00B23201635002-350-60116 #)6.508,00B23421040002-400-601066.834,00B23421640002-400-601169.762,00B14171050002-500-60106 ##)
Gross priceEUR
Deliv.-code
Units pr.pallet
Theoreticalweight kg
PN bar
DN mm
AVK ref. nos.Type
Series 02/60
Flanged gate valve(std.)Face to face DIN F5Ductile ironEPDM rubber wedgeStandard flangedrilling to DIN1882Epoxy coatedaccording to DIN30677-2 and GSKguide linesClosing direction:CTCDN 80-200
015
320,00A141910/168002-080-6003379,00B122510/1610002-100-6003650,00B93310/1612502-125-6003652,00B84910/1615002-150-6003
1.126,00B6701020002-200-6003
Gate valves
Products for water according to DIN
DIN
1 2007-07-10 10:47 CET
Gross priceEUR
Deliv.-code
Units pr.pallet
Theoreticalweight kg
PN bar
DN mm
AVK ref. nos.Type
Series 02/60
Flanged gate valve(std.)Face to face DIN F5Ductile ironEPDM rubber wedgewith DVGW W 270approvalStandard flangedrilling to ISO7005-2, EN1092-2:1997Epoxy coatedaccording to DIN30677-2 and GSKapprovedClosing direction: CTCDN 40-500
Note:# Valve having an increased bore (400 mm)## Valve having a reduced bore (400 mm)
020
217,00A241110/164002-040-60017225,00A201210/165002-050-60017315,00A171510/166502-065-60017316,00A141910/168002-080-60017373,00A122510/1610002-100-60017642,00A93310/1612502-125-60017647,00A84910/1615002-150-60017
1.117,00A6701020002-200-600071.171,00A6701620002-200-600171.751,00A41101025002-250-600071.835,00A41101625002-250-600172.446,00A21601030002-300-600072.562,00A21601630002-300-600175.196,00A23201035002-350-60007 #)5.436,00A23201635002-350-60017 #)6.878,00A23421040002-400-600077.204,00A23421640002-400-600177.398,00A13601045002-450-60007 ##)7.749,00A13601645002-450-60017 ##)
10.132,00A14171050002-500-60007 ##)10.620,00A14171650002-500-60017 ##)
Gross priceEUR
Deliv.-code
Units pr.pallet
Theoreticalweight kg
PN bar
DN mm
AVK ref. nos.Type
Series 02/67
Flanged gate valveFace to face DIN F5Ductile ironRG5 stem nutEPDM rubber wedgeStandard flangedrilling to ISO7005-2, EN 1092-2:1997Epoxy coatedaccording to DIN30677-2 and GSKguide linesClosing direction:CTCDN 50-300
030
364,00B2012255002-050-67076493,00B1715256502-065-67076493,00B1419258002-080-67076543,00B12252510002-100-67076661,00B9332512502-125-67076830,00B8492515002-150-67076
1.226,00B6702520002-200-670761.806,00B41102525002-250-670762.523,00B21602530002-300-67076
Gross priceEUR
Deliv.-code
Units pr.pallet
Theoreticalweight kg
PN bar
DN mm
AVK ref. nos.Type
Series 02/68
Flanged gate valveFace to face DIN F5Ductile ironExchangeable RG5stem nutEPDM rubber wedgeStandard flangedrilling to ISO 7005-2,EN 1092-2: 1997Epoxy coatedaccording to DIN30677-2 and GSKguide linesClosing direction:CTCDN 50-300
030
404,00A2012255002-050-6807605548,00A1715256502-065-6807605563,00A1419258002-080-6807605610,00A12252510002-100-6807605771,00A9332512502-125-6807605955,00A8492515002-150-6807605
1.451,00A6702520002-200-68076052.106,00A41102525002-250-68076052.923,00A21602530002-300-6807605
Gate valves
Products for water according to DIN
DIN
2 2007-07-10 10:47 CET
Gross priceEUR
Deliv.-code
Units pr.pallet
Theoreticalweight kg
PN bar
DN mm
AVK ref. nos.Type
Series 02/68
Flanged gate valveFace to face DIN F5Ductile ironExchangeable RG5stem nutEPDM rubber wedgeStandard flangedrilling to ISO 7005-2,EN 1092-2: 1997Epoxy coatedaccording to DIN30677-2 and GSKguide linesClosing direction:CTODN 50-300
031
404,00B2012255002-050-6817605548,00B1715256502-065-6817605563,00B1419258002-080-6817605610,00B12252510002-100-6817605771,00B9332512502-125-6817605
1.451,00B6702520002-200-68176052.106,00B41102525002-250-68176052.923,00B21602530002-300-6817605
Gross priceEUR
Deliv.-code
Units pr.pallet
Theoreticalweight kg
PN bar
DN mm
AVK ref. nos.Type
Series 02/75
Flanged gate valveFace to face DIN F5Ductile ironExchange. stemsealingNF approvedEPDM rubber wedgeStandard flangedrilling to ISO 7005-2,EN1092-2: 1997Epoxy coatedaccording to DIN30677-2 and GSKguide linesClosing direction: CTCDN 40-500
Note:# Drilling according to DIN 1882## Valve having an increased bore (400
mm)### Valve having a reduced bore (400 mm)
003
246,00A241110/164002-040-75016254,00A241210/165002-050-75016355,00A171510/166502-065-75016360,00A141910/168002-080-75016380,00A1910/168002-080-75036 #)421,00A122510/1610002-100-75016720,00A93310/1612502-125-75016735,00A84910/1615002-150-75016
1.285,00A6701020002-200-750061.339,00B6701620002-200-750161.828,00A41101025002-250-750062.048,00B41101625002-250-750162.722,00A21601030002-300-750062.838,00B21601630002-300-750165.826,00A23201035002-350-75006 ##)6.071,00B23201635002-350-75016 ##)7.508,00A23421040002-400-750068.228,00B13601045002-450-75006 ###)
10.962,00B14171050002-500-75006 ###)
Gross priceEUR
Deliv.-code
Units pr.pallet
Theoreticalweight kg
PN bar
DN mm
AVK ref. nos.Type
Series 02/75
Flanged gate valveFace to face DIN F5Ductile ironExchange. stemsealingNF approvedEPDM rubber wedgeStandard flangedrilling to ISO 7005-2,EN1092-2: 1997Epoxy coatedaccording to DIN30677-2 and GSKguide linesClosing direction: CTODN 40-500
Note:# Drilling according to DIN 1882## Valve having an increased bore (400
mm)### Valve having a reduced bore (400 mm)
004
246,00A241110/164002-040-75116254,00A241210/165002-050-75116355,00A171510/166502-065-75116360,00A141910/168002-080-75116380,00A1910/168002-080-75136 #)421,00A122510/1610002-100-75116720,00A93310/1612502-125-75116735,00A84910/1615002-150-75116
1.285,00A6701020002-200-751061.339,00B6651620002-200-751161.962,00A41101025002-250-751062.046,00B41101625002-250-751162.722,00A21601030002-300-751062.838,00B21601630002-300-751165.826,00B23201635002-350-75106 ##)7.508,00A23421040002-400-751068.228,00B13601045002-450-75106 ###)
10.962,00B14171050002-500-75106 ###)
Gate valves
Products for water according to DIN
DIN
3 2007-07-10 10:47 CET
Gross priceEUR
Deliv.-code
Units pr.pallet
Theoreticalweight kg
PN bar
DN mm
AVK ref. nos.Type
Series 02/76
Flanged gate valveFace to face DIN F5Ductile ironPos-indicator &handwheelEPDM rubber wedgeStandard flange drillingto ISO 7005-2,EN1092-2: 1997Epoxy coatedaccording to DIN30677-2 and GSKguide linesClosing direction: CTCDN 40-400
Note:# Valve having an increased bore (400 mm)
003
396,00B1110/164002-040-76016404,00B201210/165002-050-76016525,00B1510/166502-065-76016530,00B141910/168002-080-76016611,00B122510/1610002-100-76016995,00B93310/1612502-125-76016
1.010,00B84910/1615002-150-760161.785,00B6701020002-200-760062.512,00B41101025002-250-760062.596,00B41101625002-250-760163.622,00B21601030002-300-760066.926,00B23201035002-350-76006 #)7.166,00B23201035002-350-76016 #)8.608,00B23421040002-400-760068.883,00B23421640002-400-76016
Gross priceEUR
Deliv.-code
Units pr.pallet
Theoreticalweight kg
PN bar
DN mm
AVK ref. nos.Type
Series 06/30
Flanged gate valve (std.)Face to face DIN F4Ductile ironEPDM rubber wedgeStandard flange drilling toISO 7005-2, EN1092-2:1997Epoxy coated according toDIN 30677-2 and GSKguide linesClosing direction: CTCDN 40-400
003
198,00A361010/164006-040-30014208,00A361110/165006-050-30014290,00A303110/166506-065-30014290,00A201810/168006-080-30014310,00A201810/168006-080-30034342,00A202310/1610006-100-30014588,00A153110/1612506-125-30014588,00A104610/1615006-150-30014
1.024,00A10651020006-200-300041.076,00A10651620006-200-300141.606,00A81021025006-250-300041.686,00A81021625006-250-30014
61491030006-300-300032.244,00A61491030006-300-300042.356,00A61491630006-300-300144.826,00A22031035006-350-300065.066,00A22031635006-350-300164.826,00B22031035006-350-301065.066,00B22031635006-350-301166.508,00A12151040006-400-300066.834,00A12151640006-400-30016
Gross priceEUR
Deliv.-code
Units pr.pallet
Theoreticalweight kg
PN bar
DN mm
AVK ref. nos.Type
Series 06/30
Flanged gate valve (std.)Face to face DIN F4Ductile ironEPDM rubber wedgeStandard flange drilling toISO 7005-2, EN1092-2:1997Epoxy coated according toDIN 30677-2 and GSKguide linesClosing direction: CTODN 50-400
Note:# Approved acc. to NF
004
208,00B361310/165006-050-30116290,00A301410/166506-065-30114290,00A201810/168006-080-30114342,00A202310/1610006-100-30114588,00B153110/1612506-125-30114633,00B153110/1612506-125-301160010 #)588,00A104610/1615006-150-30114
1.024,00A10651020006-200-301041.076,00B10651620006-200-301141.606,00B81021025006-250-301062.244,00B61491030006-300-301046.508,00B12401040006-400-301066.834,00B12401640006-400-30116
Gate valves
Products for water according to DIN
DIN
4 2007-07-10 10:47 CET
Gross priceEUR
Deliv.-code
Units pr.pallet
Theoreticalweight kg
PN bar
DN mm
AVK ref. nos.Type
Series 06/30
Flanged gate valve (std.)Face to face DIN F4Ductile ironEPDM rubber wedge withDVGW W 270 approvalStandard flange drilling toISO 7005-2, EN1092-2:1997Epoxy coated according toDIN 30677-2 and GSKguide linesClosing direction: CTCDN 50-400
009
219,00A361110/165006-050-30017307,00A303110/166506-065-30017307,00A201810/168006-080-30017361,00A202310/1610006-100-30017625,00A153110/1612506-125-30017625,00A104610/1615006-150-30017
1.081,00A10651020006-200-300071.133,00A10651620006-200-300171.695,00A81021025006-250-300071.775,00A81021625006-250-300172.368,00A61491030006-300-300072.480,00A61491630006-300-300175.196,00B22031035006-350-300074.536,00B22031635006-350-300176.878,00B12131040006-400-30007
Gross priceEUR
Deliv.-code
Units pr.pallet
Theoreticalweight kg
PN bar
DN mm
AVK ref. nos.Type
Series 06/34
Flanged gate valveFace to face DIN F4Ductile ironAISI 316 stemEPDM rubber wedgeStandard flange drilling toISO 7005-2, EN1092-2:1997Epoxy coated according toDIN 30677-2 and GSKguide linesClosing direction: CTCDN 40-400
003
214,00B361010/164006-040-34016224,00B361110/165006-050-34016307,00B301410/166506-065-34016371,00B202310/1610006-100-34016650,00B104610/1615006-150-34016
1.161,00B10651020006-200-340061.213,00B10651620006-200-340161.771,00B81021025006-250-340061.851,00B81021625006-250-340162.419,00B61491030006-300-340062.579,00B61491630006-300-340165.049,00B22031035006-350-340065.289,00B22031635006-350-340166.731,00B12151040006-400-340067.057,00B12151640006-400-34016
Gross priceEUR
Deliv.-code
Units pr.pallet
Theoreticalweight kg
PN bar
DN mm
AVK ref. nos.Type
Series 06/35
Flanged gate valve withPin IndicatorFace to face DIN F4Ductile ironEPDM rubber wedgeStandard flange drillingto ISO 7005-2,EN1092-2: 1997Epoxy coated accordingto DIN 30677-2 and GSKguide linesClosing direction: CTCDN 200-300
Note:# Approved acc. to NF
003
1.347,00A10711020006-200-350062.112,00A81021025006-250-350062.951,00A61491030006-300-350066.626,00B201630006-350-35006 #)6.866,00B201630006-350-35016 #)
Gate valves
Products for water according to DIN
DIN
5 2007-07-10 10:47 CET
Gross priceEUR
Deliv.-code
Units pr.pallet
Theoreticalweight kg
PN bar
DN mm
AVK ref. nos.Type
Series 06/35
Flanged gate valve withPin IndicatorFace to face DIN F4Ductile ironEPDM rubber wedgeStandard flange drillingto ISO 7005-2,EN1092-2: 1997Epoxy coated accordingto DIN 30677-2 and GSKguide linesClosing direction: CTODN 50-300
004
283,00A301310/165006-050-35016365,00B1610/166506-065-35016380,00A202010/168006-080-35016482,00A202710/1610006-100-35016764,00A153610/1612506-125-35016764,00A10511615006-150-35016
1.399,00A10711620006-200-350162.192,00B81131625006-250-350163.063,00B61601630006-300-35016
Gross priceEUR
Deliv.-code
Units pr.pallet
Theoreticalweight kg
PN bar
DN mm
AVK ref. nos.Type
Series 06/75
Flanged gate valveFace to face DIN F4Ductile ironExchangeable stemsealingNF approvedEPDM rubber wedgeStandard flange drilling toISO 7005-2, EN1092-2:1997Epoxy coated according toDIN 30677-2 and GSKguide linesClosing direction: CTCDN 50-400
003
248,00B361210/165006-050-75016345,00B301410/166506-065-75016350,00B201910/168006-080-75016409,00B202510/1610006-100-75016698,00B153310/1612506-125-75016713,00B104610/1615006-150-75016
1.249,00B10651020006-200-750061.906,00B81021025006-250-750062.644,00B61491030006-300-750065.826,00B22031630006-350-750067.508,00B12131640006-400-75006
Gross priceEUR
Deliv.-code
Units pr.pallet
Theoreticalweight kg
PN bar
DN mm
AVK ref. nos.Type
Series 06/75
Flanged gate valveFace to face DIN F4Ductile ironExchangeable stemsealingNF approvedEPDM rubber wedgeStandard flange drilling toISO 7005-2, EN1092-2:1997Epoxy coated according toDIN 30677-2 and GSKguide linesClosing direction: CTODN 50-300
Note:# Approved acc. to NF
004
248,00B361210/165006-050-75116345,00B301410/166506-065-75116350,00B201910/168006-080-75116409,00B202510/1610006-100-75116698,00B153310/1612506-125-75116 #)713,00B104610/1615006-150-75116 #)
1.249,00B10651020006-200-75106 #)1.906,00B81021025006-250-75106 #)2.644,00B61491030006-300-75106 #)
Gate valves
Products for water according to DIN
DIN
6 2007-07-10 10:47 CET
Gross priceEUR
Deliv.-code
Units pr.pallet
Theoreticalweight kg
PN bar
DN mm
AVK ref. nos.Type
Series 06/75
Flanged gate valveFace to face DIN F4Ductile ironExchangeable stemsealingNF approvedEPDM rubber wedgeStandard flange drilling toDIN1882Epoxy coated according toDIN 30677-2 and GSKguide linesClosing direction: CTCDN 65-80
015
364,00B30146506-075-75096370,00B198006-080-75036
Gross priceEUR
Deliv.-code
Units pr.pallet
Theoreticalweight kg
PN bar
DN mm
AVK ref. nos.Type
Series 06/85
Flanged gate valveFace to face DIN F4Ductile ironRG5 stem nutEPDM rubber wedgeStandard flange drilling toISO 7005-2, EN1092-2:1997Epoxy coated according toDIN 30677-2 and GSKguide linesClosing direction: CTCDN 50-200
003
268,00B361210/165006-050-8501605365,00B301410/166506-065-8501405372,00B201810/168006-080-8501405431,00B202310/1610006-100-8501405720,00B153310/1612506-125-8501405743,00B104610/1615006-150-8501405
1.338,00B10651620006-200-8501405
Gross priceEUR
Deliv.-code
Units pr.pallet
Theoreticalweight kg
PN bar
DN mm
AVK ref. nos.Type
Series 15/42
Flanged gate valveprepared for actuatorFace to face DIN F4Actuator on requestEPDM rubber wedgeStandard flange drilling toISO 7005-2, EN1092-2:1997Epoxy coated according toDIN 30677-2 and GSKguide linesClosing direction: CTCDN 40-300
003
984,00A361310/164015-040-40016984,00A361410/165015-050-40016984,00A301710/166515-065-42016984,00A202110/168015-080-42016
1.070,00A202410/1610015-100-420161.376,00A153410/1612515-125-400161.376,00A104910/1615015-150-420161.684,00A10681020015-200-420061.736,00A10681620015-200-420162.840,00A81131025015-250-420062.920,00A81131625015-250-420163.367,00A61601030015-300-420063.479,00A61601630015-300-42016
Gate valves
Products for water according to DIN
DIN
7 2007-07-10 10:47 CET
Gross priceEUR
Deliv.-code
Units pr.pallet
Theoreticalweight kg
PN bar
DN mm
AVK ref. nos.Type
Series 15/72
Flanged gate valveprepared foractuatorFace to face DIN F5Actuator on requestEPDM rubber wedgeStandard flangedrilling to ISO7005-2, EN1092-2:1997Epoxy coatedaccording to DIN30677-2 and GSKguide linesClosing direction: CTCDN 40-500
Note:# Valve having an increased bore (400 mm)## Valve having a reduced bore (400 mm)
003
984,00B361410/164015-040-70016984,00B201410/165015-050-70016984,00B171810/166515-065-72016984,00B142110/168015-080-72016
1.070,00B202410/1610015-100-720161.376,00B84910/1615015-150-720161.684,00B6681020015-200-720061.738,00B6681620015-200-720162.840,00B41131025015-250-720062.924,00B41131625015-250-720163.367,00B21601030015-300-720063.483,00B21601630015-300-720166.998,00B22961035015-350-72006 #)7.238,00B22961635015-350-72016 #)9.020,00B23531040015-400-720069.346,00B23531640015-400-720169.530,00B13721045015-450-72006 ##)9.881,00B13721645015-450-72016 ##)
10.786,00B14301050015-500-72006 ##)11.274,00B14301650015-500-72016 ##)
Gross priceEUR
Deliv.-code
Units pr.pallet
Theoreticalweight kg
PN bar
DN mm
AVK ref. nos.Type
Series 20/30
Flanged gate valveFace to face DIN F5Ductile ironInternal enamelEPDM rubber wedgewith DVGW W 270approvalStandard flangedrilling to ISO7005-2, EN1092-2:1997Epoxy coatedaccording to DIN30677-2 and GSKguide linesClosing direction: CTCDN 40-400
Note:# Valve having an increased bore (400 mm)
003
287,00A241110/164020-040-30017295,00A201210/165020-050-30017402,00A171510/166520-065-30017426,00A141910/168020-080-30017508,00A122510/1610020-100-30017817,00A93310/1612520-125-30017867,00A84910/1615020-150-30017
1.517,00A6701020020-200-300071.571,00A6701620020-200-300172.351,00A41101025020-250-300072.435,00A41101625020-250-300173.271,00A21601030020-300-300073.387,00A21601630020-300-300176.696,00A23201035020-350-30007 #)6.936,00A23201635020-350-30017 #)8.378,00A23421040020-400-300078.704,00A23421640020-400-30017
Gross priceEUR
Deliv.-code
Units pr.pallet
Theoreticalweight kg
PN bar
DN mm
AVK ref. nos.Type
Series 20/35
Flanged gate valveFace to face DIN F5AISI 316 stemDuctile ironInternal enamelEPDM rubber wedgewith DVGW W 270approvalStandard flangedrilling to ISO7005-2, EN1092-2:1997Epoxy coatedaccording to DIN30677-2 and GSKguide linesClosing direction: CTCDN 50-400
003
311,00A201210/165020-050-35017419,00A171510/166520-065-35017454,00A141910/168020-080-35017537,00A122510/1610020-100-35017850,00A93310/1612520-125-35017929,00A84910/1615020-150-35017
1.654,00A6701020020-200-350071.708,00A6701620020-200-350172.516,00A41101025020-250-350072.600,00A41101625020-250-350173.446,00A21691030020-300-350073.562,00A21601630020-300-350178.601,00A23301040020-400-350078.927,00A23301640020-400-35017
Gate valves
Products for water according to DIN
DIN
8 2007-07-10 10:47 CET
Gross priceEUR
Deliv.-code
Units pr.pallet
Theoreticalweight kg
PN bar
DN mm
AVK ref. nos.Type
Series 26/00
Flanged gate valveFace to face DIN F4Ductile ironEPDM rubber wedge withDVGW W 270 approvalStandard flange drilling toISO 7005-2, EN1092-2:1997Epoxy coated according toDIN 30677-2 outside,enamelled to DEV insideClosing direction: CTCDN 40-300
009
268,00A361010/164026-040-00017278,00A361110/165026-050-00017377,00A301410/166526-065-00017400,00A201810/168026-080-00017477,00A202310/1610026-100-00017763,00A153110/1612526-125-00017808,00A104610/1615026-150-00017
1.424,00A10651020026-200-000071.476,00A10651620026-200-000172.206,00A81021025026-250-000072.286,00A81021625026-250-000173.069,00A61491030026-300-000073.181,00A61491630026-300-00017
Gross priceEUR
Deliv.-code
Units pr.pallet
Theoreticalweight kg
PN bar
DN mm
AVK ref. nos.Type
Series 55/30
Flanged gate valveresilient seatedLong length F5EPDM rubber wedgeStandard flange drillingto ISO 7005-2,EN1092-2: 1997Epoxy coated accordingto DIN 30677-2 andGSK guide linesClosing direction: CTCDN 450-600
Note:# With by-pass
003
10.500,00B16331045055-450-30006001 #)10.500,00B16331645055-450-30016001 #)13.183,00B16631650055-500-30006001 #)13.183,00B16631650055-500-30016001 #)16.866,00B18281060055-600-30006001 #)16.866,00B18281660055-600-30016001 #)
Gross priceEUR
Deliv.-code
Units pr.pallet
Theoreticalweight kg
PN bar
DN mm
AVK ref. nos.Type
Series 55/30
Flanged gate valve resilientseatedLong length F5EPDM rubber wedgeStandard flange drilling toISO 7005-2, EN1092-2:1997Epoxy coated according toDIN 30677-2 and GSKguide linesClosing direction: CTCDN 450-600
005
9.300,00B16331045055-450-300069.300,00B16331645055-450-30016
11.983,00A16631050055-500-3000611.983,00B16631650055-500-3001411.983,00A16631650055-500-3001615.666,00A18281060055-600-3000615.666,00B18281660055-600-3001415.666,00A18281660055-600-30016
Gate valves
Products for water according to DIN
DIN
9 2007-07-10 10:47 CET
Gross priceEUR
Deliv.-code
Units pr.pallet
Theoreticalweight kg
PN bar
DN mm
AVK ref. nos.Type
Series 55/35
Flanged gate valveresilient seated w.PowersaverLong length F5EPDM rubber wedgeStandard flange drilling toISO 7005-2, EN1092-2:1997Epoxy coated according toDIN 30677-2 and GSKguide linesClosing direction: CTCDN 450-600
003
11.700,00B15851045055-450-3500614.383,00B16151050055-500-3500614.383,00B16151650055-500-3501618.066,00B17801060055-600-35006
Gross priceEUR
Deliv.-code
Units pr.pallet
Theoreticalweight kg
PN bar
DN mm
AVK ref. nos.Type
Series 55/35
Flanged gate valveresilient seated w.PowersaverLong length F5EPDM rubber wedgeStandard flange drillingto ISO 7005-2, EN1092-2: 1997Epoxy coated accordingto DIN 30677-2 and GSKguide linesClosing direction: CTCDN 500-600
Note:# With by-pass
005
15.583,00B16151650055-500-35016001 #)19.266,00B17801060055-600-35006001 #)
Gross priceEUR
Deliv.-code
Units pr.pallet
Theoreticalweight kg
PN bar
DN mm
AVK ref. nos.Type
Series 55/35
Flanged gate valveresilient seated w.PowersaverLong length F5EPDM rubber wedgeStandard flange drillingto ISO 7005-2, EN1092-2: 1997Epoxy coated accordingto DIN 30677-2 and GSKguide linesClosing direction: CTODN 450-500
Note:# With by-pass
006
10.556,00B15851645055-450-351160001 #)6151650055-500-351160001 #)
Gate valves
Products for water according to DIN
DIN
10 2007-07-10 10:47 CET
Gross priceEUR
Deliv.-code
Units pr.pallet
Theoreticalweight kg
PN bar
DN mm
AVK ref. nos.Type
Series 01/70
Socket gate valveSupa Plus tensilecouplings for UPVCDuctile ironEPDM rubberwedgeEpoxy coatedaccording to DIN30677-2 and GSKguide linesClosing direction:CTCDN 40-300
010
290,00A167164001-050-70016324,00A248165001-063-70016356,00A169166501-075-70016388,00A2013168001-090-70016483,00A12181610001-110-70016651,00A9241612501-125-70016661,00A9401612501-140-70016785,00A8561615001-160-70016
1.349,00A5581620001-200-700161.349,00A4801622501-225-700162.636,00A4951625001-250-700162.740,00A1231625001-280-700163.260,00A22461630001-315-70016
Gross priceEUR
Deliv.-code
Units pr.pallet
Theoreticalweight kg
PN bar
DN mm
AVK ref. nos.Type
Series 12/51
Exchange valveexcl. combi flangeEPDM rubberwedge with DVGWW 270 approvalStandard flangedrilling to ISO7005-2, EN 1092-2:1997Epoxy coatedaccording to DIN30677-2 and GSKguide linesClosing direction:CTCDN 50-300
005
250,00A171210/165012-050-51017300,00A151710/166512-065-51017340,00A122110/168012-080-51017450,00A102710/1610012-100-51017700,00A83710/1612512-125-51017790,00A65310/1615012-150-51017
1.350,00A4771020012-200-510071.400,00A4771620012-200-510172.000,00A1201025012-250-510072.080,00A21201625012-250-510172.700,00A21741030012-300-510072.700,00A21741630012-300-51017
Gross priceEUR
Deliv.-code
Units pr.pallet
Theoreticalweight kg
PN bar
DN mm
AVK ref. nos.Type
Series 12/51
Exchange valveexcl. combi flangeEPDM rubberwedge with DVGWW 270 approvalStandard flangedrilling to DIN1882Epoxy coatedaccording to DIN30677-2 and GSKguide linesClosing direction:CTCDN 80-100
015
363,00B122110/168012-080-51037480,00B102710/1610012-100-51037
Gate valves
Products for water according to DIN
DIN
11 2007-07-10 10:47 CET
Gross priceEUR
Deliv.-code
Units pr.pallet
Theoreticalweight kg
PN bar
DN mm
AVK ref. nos.Type
Series 32/10
Gate valve withspigot ends forasbestos cementpipes to ISO class18EPDM rubberwedgeEpoxy coatedaccording to DIN30677-2 and GSKguide linesClosing direction:CTCDN 80-300
010
336,00B2016168032-080-10016438,00B12281610032-100-10016768,00B9471615032-150-10016
1.324,00B6861620032-200-10016B4941620032-225-10016
1.960,00B41231625032-250-100162.592,00B21941630032-300-10016
Gross priceEUR
Deliv.-code
Units pr.pallet
Theoreticalweight kg
PN bar
Dmm
DN mm
AVK ref. nos.Type
Series 32/40
Gate valve withlong spigot endsfor cast ironpipes to ISO2531 class 18EPDM rubberwedgeEpoxy coatedaccording to DIN30677-2 andGSK guide linesClosingdirection: CTCDN 80-300
010
370,00A201616988032-080-40016482,00A15241611810032-100-40016845,00A9451617015032-150-40016
1.456,00A6761622220032-200-400162.156,00A41211627425032-250-400162.851,00A21861632630032-300-40016
Gross priceEUR
Deliv.-code
Units pr.pallet
Theoreticalweight kg
PN bar
Dmm
DN mm
AVK ref. nos.Type
Series 32/40
Gate valve withlong spigot endsfor cast ironpipes to ISO2531 class 18EPDM rubberwedgeEpoxy coatedaccording to DIN30677-2 outside,enamelled toDEV insideClosing direction: CTCDN 100-200
020
617,00B15241611810032-100-40016701.065,00B9451617015032-150-40016701.856,00B6761622220032-200-4001670
Gate valves
Products for water according to DIN
DIN
12 2007-07-10 10:47 CET
Gross priceEUR
Deliv.-code
Units pr.pallet
Theoreticalweight kg
PN bar
Dmm
DN mm
AVK ref. nos.Type
Series 32/60
Gate valve withspigot ends forasbestos cementpipes to ISO class18AISI 316 stem300 My coatingEPDM rubberwedgeEpoxy coatedaccording to DIN30677-2 and GSKguide linesClosing direction:CTCDN 80-450
Note:# With PowerSaver
010
A2016161068032-080-6001610559,00A12281612610032-100-6001610956,00A471617815032-150-6001610
1.698,00A6861623420032-200-6001610A41121625522532-225-6001610
2.478,00A1231628825032-250-60016103.258,00A1941634430032-300-6001610
A12651645640032-400-6001610A5701650845032-450-6001610 #)
Gross priceEUR
Deliv.-code
Units pr.pallet
Theoreticalweight kg
PN bar
Dmm
DN mm
AVK ref. nos.Type
Series 32/70
Gate valve withspigot ends for castiron pipes to ISO2531 class 18EPDM rubber wedgeEpoxy coatedaccording to DIN30677-2 and GSKguide linesClosing direction:CTCDN 50-300
003
240,00A24816665032-050-70016290,00A201116826532-065-70016336,00A201616988032-080-70016438,00A14241611810032-100-70016676,00A11321614412532-125-70016768,00A9451617015032-150-70016
1.324,00A6761622220032-200-700161.960,00A41101627425032-250-700162.592,00A21861632630032-300-70016
Gross priceEUR
Deliv.-code
Units pr.pallet
Theoreticalweight kg
PN bar
Dmm
DN mm
AVK ref. nos.Type
Series 38/80
Gate valve withflange/PE-pipeDuctile ironEPDM rubberwedgeStandard flangedrilling to ISO7005-2,EN1092-2: 1997Epoxy coated according to DIN 30677-2 andGSK guide linesClosing direction: CTCDN 50-200
Note:# PE 100, PN 16 black/blue pipes,
DVGW/W270, PN 10 drilling
116
334,00A81116635038-063-80163 #)492,00A71616756538-075-80163 #)694,00A62116908038-090-80163 #)941,005271611010038-110-80163 #)
1.182,00A3361612512538-125-80163 #)1.254,00A3531616015038-160-80163 #)1.480,00A3561618015038-180-80163 #)2.859,00A2921622520038-225-80163 #)
Gate valves
Products for water according to DIN
DIN
13 2007-07-10 10:47 CET
Gross priceEUR
Deliv.-code
Units pr.pallet
Theoreticalweight kg
PN bar
Dmm
DN mm
AVK ref. nos.Type
Series 36/80
Gate valve withPE-pipesDuctile ironEPDM rubber wedgeEpoxy coatedaccording to DIN30677-2 and GSKguide linesClosing direction: CTCDN 50-300
Note:# PE 100, PN 16 black/blue pipes,
DVGW/W270
116
403,00A9710/16635036-063-80163417,00A101216756536-075-80163 #)510,00A52016908036-090-80163 #)598,00A5271611010036-110-80163 #)834,00A33910/1612512536-125-80163
1.148,00A3391612512536-140-80163 #)1.148,00A3521616015036-160-80163 #)1.296,00A3581618015036-180-80163 #)1.932,00A4881620020036-200-80163 #)2.260,00A2911622520036-225-80163 #)3.354,00A11261628025036-280-80163 #)5.422,00A11401631530036-315-80163 #)
Gross priceEUR
Deliv.-code
Units pr.pallet
Theoreticalweight kg
PN bar
Dmm
DN mm
AVK ref. nos.Type
Series 36/80
Gate valve withPE-pipesDuctile ironEPDM rubber wedgeEpoxy coatedaccording to DIN30677-2 and GSKguide linesClosing direction: CTCDN 65-300
Note:# PE 100, PN 10 black/blue pipes,
DVGW/W270
126
417,00A1210756536-075-80263 #)510,00A2010758036-090-80263 #)598,00A271011010036-110-80263 #)
1.148,00A521016015036-160-80263 #)1.296,00A3521018015036-180-80263 #)1.932,00A881020020036-200-80263 #)2.260,00A2881022520036-225-80263 #)3.130,00A1181025025036-250-80263 #)5.422,00A1401031530036-315-80263 #)
Gross priceEUR
Deliv.-code
Units pr.pallet
Theoreticalweight kg
PN bar
Ddmm
DN mm
AVK ref. nos.Type
Series 01/80
Socket gate valveEURO socket endsfor UPVCDuctile ironEPDM rubberwedge withAS4020 approvalEpoxy coatedaccording to DIN30677-2 and GSKguide linesClosing direction:CTCDN 40-400
003
234,00A24816504001-050-80014276,00A24916635001-063-80014310,00A191116756501-075-80014314,00A171616908001-090-80014372,00A12281611010001-110-80014627,00A9321612512501-125-80014627,00A7471616015001-160-80014
1.036,00A6761620020001-200-800141.385,00A6861622520001-225-800141.938,00A41141625025001-250-800141.938,00B41141625025001-250-801162.007,00A41231628025001-280-800143.149,00A21941631530001-315-800145.380,00A12931640040001-400-80014
Gate valves
Products for water according to DIN
DIN
14 2007-07-10 10:47 CET
Gross priceEUR
Deliv.-code
Units pr.pallet
Theoreticalweight kg
PN bar
Ddmm
DN mm
AVK ref. nos.Type
Series 01/80
Socket gate valveEURO socket endsfor UPVCDuctile ironEPDM rubberwedgeEpoxy coatedaccording to DIN30677-2 and GSKguide linesClosing direction:CTODN 40-400
011
B24816504001-050-80116276,00B24916635001-063-80116310,00B191116756501-075-80116314,00B171616908001-090-80116372,00B12281611010001-110-80116627,00B7471616015001-160-80116
1.036,00B6761620020001-200-801163.149,00B21941631530001-315-80116
B2931640040001-400-80116
Gross priceEUR
Deliv.-code
Units pr.pallet
Theoreticalweight kg
PN bar
Ddmm
DN mm
AVK ref. nos.Type
Series 01/80
Socket gate valveEURO socket endsfor UPVCDuctile ironNBR rubber wedgewith DVGW KTWapprovalEpoxy coatedaccording to DIN30677-2 and GSKguide linesClosing direction:CTCDN 40-300
012
234,00B24816504001-050-80013276,00B24916635001-063-80013310,00B19916756501-075-80013314,00B171616908001-090-80013372,00B12281611010001-110-80013627,00B9321612512501-125-80013627,00B7471616015001-160-80013
1.036,00B6761620020001-200-800131.036,00B4861622520001-225-800131.938,00B41101625025001-250-800133.149,00B21601631530001-315-80013
Gross priceEUR
Deliv.-code
Units pr.pallet
Theoreticalweight kg
PN bar
Ddmm
DN mm
AVK ref. nos.Type
Series 01/80
Socket gate valveEURO socket endsfor UPVCDuctile ironEPDM rubberwedge with DVGWW 270 approvalEpoxy coatedaccording to DIN30677-2 and GSKapprovedClosing direction:CTCDN 40-300
014
B24816504001-050-80017314,00B171616908001-090-80017
B12281611010001-110-80017627,00B9321612512501-125-80017627,00B7471616015001-160-80017
B6761620020001-200-800171.385,00B861622520001-225-800173.149,00B21231631530001-315-80017
Gate valves
Products for water according to DIN
DIN
15 2007-07-10 10:47 CET
Gross priceEUR
Deliv.-code
Units pr.pallet
Theoreticalweight kg
PN bar
DN mm
AVK ref. nos.Type
Series 33/00
Gate valve withsocket ends for castiron pipes to ISO2531EPDM rubberwedge with DVGWW 270 approvalEpoxy coatedaccording to DIN30677-2 outside,enamelled to DEVinsideClosing direction:CTCDN 80-200
011
430,00B16168033-080-0001770512,00B12211610033-100-0001770950,00B8401615033-150-0001770
1.424,00B6751620033-200-0001770
Gross priceEUR
Deliv.-code
Units pr.pallet
Theoreticalweight kg
PN bar
DN/DNmm
AVK ref. nos.Type
Series 18/40
Combi-Tee withflanged endsDuctile ironEPDM rubberwedgeStandard flangedrilling to ISO7005-2,EN1092-2: 1997Epoxy coatedaccording to DIN30677-2 andGSK guide linesClosingdirection: CTCDN 80-100
003
488,00A82410/1680-8018-080-40016520,00A82410/1680-10018-080-41016590,00A72610/16100-10018-100-40016721,00A62610/16100-15018-100-43016883,00A4310100-20018-100-44006
Gross priceEUR
Deliv.-code
Units pr.pallet
Theoreticalweight kg
PN bar
DN mm
AVK ref. nos.Type
Series 18/70
Combi-cross 4outlet flangedDuctile ironEPDM rubberwedgeStandard flangedrilling to ISO7005-2,EN1092-2: 1997Epoxy coatedaccording to DIN30677-2 andGSK guide linesClosing direction: CTCDN 100-300
Note:# With ball valve and DN 100 center outlet
003
2.717,00A211910/1610018-100-70011 #)3.754,00A120210/1615018-150-70011 #)6.413,00A13161020018-200-70001 #)6.571,00A13161620018-200-70011 #)6.734,00A15201025018-250-70006 #)6.818,00A15201625018-250-70016 #)
10.927,00A16901030018-300-70006 #)11.043,00A16901630018-300-70016 #)
Gate valves
Com
bi valves
Products for water according to DIN
DIN
16 2007-07-10 10:47 CET
Gross priceEUR
Deliv.-code
Units pr.pallet
Theoreticalweight kg
PN bar
DN mm
AVK ref. nos.Type
Series 18/70
Combi-cross 4outlet flangedDuctile ironEPDM rubberwedgeStandard flangedrilling to ISO7005-2,EN1092-2: 1997Epoxy coatedaccording to DIN30677-2 andGSK guide linesClosing direction: CTODN 100-300
Note:# With ball valve and DN 100 center outlet
004
2.717,00A211810/1610018-100-70111 #)3.754,00A120210/1615018-150-70111 #)6.413,00A13121020018-200-70101 #)
A6901030018-300-70106 #)
Gross priceEUR
Deliv.-code
Units pr.pallet
Theoreticalweight kg
PN bar
DN mm
AVK ref. nos.Type
Series 18/70
Combi-cross 4outlet flangedDuctile ironEPDM rubberwedgeStandard flangedrilling to ISO7005-2,EN1092-2: 1997Epoxy coatedaccording to DIN30677-2 andGSK guide linesClosing direction: CTCDN 100-200
Note:# Without ball valve and DN 100 center outlet
005
2.289,00A211910/1610018-100-7001600210 #)3.222,00A120210/1615018-150-7001600210 #)5.985,00A13161020018-200-7000600210 #)
Gross priceEUR
Deliv.-code
Units pr.pallet
Theoreticalweight kg
PN bar
DN mm
AVK ref. nos.Type
Series 18/80
Combi-cross 3outlet flangedDuctile ironEPDM rubberwedgeStandard flangedrilling to ISO7005-2, EN1092-2: 1997Epoxy coatedaccording to DIN30677-2 andGSK guide linesClosing direction: CTCDN 100-300
Note:# With ball valve and DN 100 center outlet
003
2.268,00A39210/1610018-100-80011 #)3.043,00A216210/1615018-150-80011 #)5.313,00A12391020018-200-80001 #)5.367,00A12391620018-200-80011 #)5.965,00A14501025018-250-80006 #)5.981,00A14501625018-250-80016 #)9.755,00A16901030018-300-80006 #)9.871,00A16201630018-300-80016 #)
Com
bi valves
Products for water according to DIN
DIN
17 2007-07-10 10:47 CET
Gross priceEUR
Deliv.-code
Units pr.pallet
Theoreticalweight kg
PN bar
DN mm
AVK ref. nos.Type
Series 18/80
Combi-cross 3outlet flangedDuctile ironEPDM rubberwedgeStandard flangedrilling to ISO7005-2, EN1092-2: 1997Epoxy coatedaccording to DIN30677-2 andGSK guide linesClosing direction: CTODN 100-300
Note:# With ball valve and DN 100 center outlet
004
2.268,00A39210/1610018-100-80111 #)3.043,00A216210/1615018-150-80111 #)5.313,00A12391020018-200-80101 #)
A4501025018-250-80106 #)A6901030018-300-80106 #)
Gross priceEUR
Deliv.-code
Units pr.pallet
Theoreticalweight kg
PN bar
DN mm
AVK ref. nos.Type
Series 18/80
Combi-cross 3outlet flangedDuctile ironEPDM rubberwedgeStandard flangedrilling to ISO7005-2, EN1092-2: 1997Epoxy coatedaccording to DIN30677-2 andGSK guide linesClosing direction: CTCDN 150-200
Note:# Without ball valve and DN 100 center outlet
005
2.644,00A216210/1615018-150-8001600210 #)4.914,00A12391020018-200-8000600210 #)
Gross priceEUR
Deliv.-code
Theoreticalweight kg
DN/DNmm
AVK ref. nos.Type
Series 18/89
Extension piece for AVKcombi-crossEpoxy coated according to DIN30677-2 and GSK guide linesDN 150-200
001
52,00A2100-15018-150-8900059,00A2200-20018-200-89000
Com
bi valves
Products for water according to DIN
DIN
18 2007-07-10 10:47 CET
Gross priceEUR
Deliv.-code
Theoreticalweight kg
DN mm
AVK ref. nos.Type
Series 18/93
Ball valve forAVKcombi-crossDN 20
001
107,00A12018-150-27
Gross priceEUR
Deliv.-code
Units pr.pallet
Theoreticalweight kg
Hmm
AVK ref. nos.Type
Series 04/10
Surface boxFixed street coverGrey cast ironDistance ring and squarein ductile ironEpoxy coated accordingto DIN 30677-2 and GSKguide lines
Note:# Surface box body## Lid "VAND -
AVK"### Lid "GAS - AVK"#### Lid "Water - AVK"##### Distance ring
001
45,00A100519004-000-5100 #)24,00A1002004-000-5200 ##)26,00A1002004-000-6600 ###)24,00A1002004-000-6900 ####)9,00A10011004-001-5300 #####)
10,00A100012004-001-5400 #####)13,00A10013004-001-5500 #####)18,00A100014004-001-5600 #####)22,00B100025004-001-5700 #####)
Gross priceEUR
Deliv.-code
Units pr.pallet
Theoreticalweight kg
Hmm
AVK ref. nos.Type
Series 04/11
Surface boxFloating streetcoverDuctile iron
Note:# Surface box
body## Lid "VAND -
AVK"
001
65,00A100413004-000-6000/5200 #)91,00A50615004-002-6000/6200 #)70,00A504004-002-6200 ##)
Gross priceEUR
Deliv.-code
Units pr.pallet
Hmm
AVK ref. nos.Type
Series 04/12
Surface boxUniversal streetcover for AVKtelescopic ext.spindleDuctile iron
Note:# Complete
surface boxinscription lid"VAND"(without
## Distance ring
001
119,00A1422404-003-51000 #)9,00A200004-003-5300 ##)
Com
bi valvesA
ccessories
Products for water according to DIN
DIN
19 2007-07-10 10:47 CET
Theoreticalweight kg
DN/DNmm
AVK ref. nos.Type
Series 04/20
Stem cap forextension spindlesEpoxy coatedaccording to DIN30677-2 and GSKguide linesDN 150-400
001
025-15004-160-17001200-40004-400-1700
Gross priceEUR
Deliv.-code
Theoreticalweight kg
DN/DNmm
AVK ref. nos.Type
Series 04/22
Stem cap forvalvesEpoxy coatedaccording to DIN30677-2 and GSKguide linesDN 40-400
001
7,00A040-5008-040-6100010,00A165-8008-065-6100011,00A1100-15008-100-6100016,00A1200-20008-200-6100016,00A1250-30008-250-6100018,00A2350-50008-400-61000
Gross priceEUR
Deliv.-code
Theoreticalweight kg
DN/DNmm
AVK ref. nos.Type
Series 04/23
Stem cap for valvesEpoxy coated according toDIN 30677-2 and GSK guidelinesDN 40
001
15,00A025-5004-032-210015,00A140-5004-000-1000
Gross priceEUR
Deliv.-code
Units pr.pallet
PC1mm
DN/DNmm
AVK ref. nos.Type
Series 04/05
Stem extension for service connectionvalvesFixed lengthKey adaptor #14-22PC1 = Pipe cover
001
50,00A4880025-5004-032-1500150,00A65100025-5004-032-1550150,00A65100025-5004-032-1600166,00A60150025-5004-032-1650166,00A48200025-5004-032-1750182,00A48300025-5004-032-18001
Accessories
Products for water according to DIN
DIN
20 2007-07-10 10:47 CET
Gross priceEUR
Deliv.-code
Units pr.pallet
L8mm
DN/DNmm
AVK ref. nos.Type
Series 04/07
Stem extension for service connectionvalvesTelescopicKey adaptor #14-22L8 = Actual length
001
48,00A48450-70025-5004-032-2000173,00A72650-110025-5004-032-2050180,00A481050-175025-5004-032-2100186,00A1400-235025-5004-032-2120191,00A551700-290025-5004-032-21501
Gross priceEUR
Theoreticalweight kg
AVK ref. nos.Type
Series 04/15
T-key for extensionspindlesEpoxy coated according toDIN 30677-2 and GSKguide lines
001
175,00204-050-2000175,00204-050-2100
Gross priceEUR
Deliv.-code
Units pr.pallet
Theoreticalweight kg
Dmm
DN mm
AVK ref. nos.Type
Series 08/00
HandwheelEpoxy coatedaccording to DIN30677-2 andGSK guide linesClosingdirection: CTCDN 50-400
Note:# For gate valves series 21, 37 & 54
001
26,00A30021805008-050-0100032,00A28522258008-080-0200038,00A187428010008-100-010000000 #)42,00A119532015008-150-0200056,00A90632020008-200-0100086,00A241150025008-250-02000
146,00A181764040008-400-01000
Gross priceEUR
Deliv.-code
Units pr.pallet
PC1mm
DN/DNmm
AVK ref. nos.Type
Series 04/02
Stem extension for gate valvesFixed lengthKey adaptor #23-32PC1 = Pipe cover
001
57,00A4280040-5004-050-3500258,00A65100040-5004-050-3550263,00A65125040-5004-050-3600274,00A60150040-5004-050-3650293,00A60200040-5004-050-37502
128,00A300040-5004-050-3800257,00A6580065-8004-080-3500258,00A65100065-8004-080-3550263,00A42125065-8004-080-3600274,00A60150065-8004-080-3650293,00A60200065-8004-080-37502
128,00A300065-8004-080-3800257,00A80800100-12504-125-3500258,00A651000100-12504-125-3550263,00A651250100-12504-125-3600274,00A601500100-12504-125-36502
Accessories
Products for water according to DIN
DIN
21 2007-07-10 10:47 CET
Gross priceEUR
Deliv.-code
Units pr.pallet
PC1mm
DN/DNmm
AVK ref. nos.Type
Series 04/02
Stem extension for gate valvesFixed lengthKey adaptor #23-32PC1 = Pipe cover
001
93,00A602000100-12504-125-37502128,00A283000100-12504-125-3800257,00A80800150-15004-150-3500258,00A601000150-15004-150-3550263,00A521250150-15004-150-3600274,00A481500150-15004-150-3650293,00A202000150-15004-150-37502
128,00B3000150-15004-150-3800259,00A20800200-20004-200-3500269,00A511000200-20004-200-3550293,00A361250200-20004-200-3600293,00A201500200-20004-200-36502
127,00A332000200-20004-200-37502187,00A103000200-20004-200-3800259,00A34800250-30004-300-3500269,00A341000250-30004-300-3550293,00A331250250-30004-300-3600293,00A201500250-30004-300-36502
127,00A332000250-30004-300-37502187,00A103000250-30004-300-3800293,00A261250350-40004-400-3600293,00A201500350-40004-400-36502
127,00B2000350-40004-400-37502187,00A3000350-40004-400-38002
Gross priceEUR
Deliv.-code
Units pr.pallet
L8mm
DN/DNmm
AVK ref. nos.Type
Series 04/04
Stem extension for gate valvesTelescopicKey adaptor #23-32L8 = Actual length
001
74,00A42450-70040-5004-050-4000290,00A42650-110040-5004-050-40502
104,00A421050-175040-5004-050-41002131,00A421400-235040-5004-050-41202157,00A421700-290040-5004-050-4150274,00A55450-70040-5004-080-4000290,00A55650-110065-8004-080-40502
104,00A551050-175065-8004-080-41002131,00A551400-235065-8004-080-41202157,00A551700-290065-8004-080-4150274,00A72450-700100-12504-125-4000290,00A48650-1100100-12504-125-40502
104,00A441050-1750100-12504-125-41002131,00A551400-2350100-12504-125-41202157,00A551700-2900100-12504-125-4150274,00A72450-700150-15004-150-4000290,00A44650-1100150-15004-150-40502
104,00A441050-1750150-15004-150-41002131,00A551400-2350150-15004-150-41202157,00A441700-2900150-15004-150-4150289,00A51450-700200-20004-200-40002
109,00A33650-1100200-20004-200-40502137,00A301050-1750200-20004-200-41002164,00B551400-2350200-20004-200-41202190,00A401700-2900200-20004-200-4150289,00A42450-700250-30004-300-40002
109,00A22650-1100250-30004-300-40502137,00A301050-1750250-30004-300-41002164,00A551400-2350250-30004-300-41202190,00A301700-2900250-30004-300-4150289,00A13450-700350-40004-400-40002
109,00A20650-1100350-40004-400-40502137,00A301050-1750350-40004-400-41002164,00B551400-2350350-40004-400-41202190,00A101700-2900350-40004-400-41502
Accessories
Products for water according to DIN
DIN
22 2007-07-10 10:47 CET
Gross priceEUR
Deliv.-code
Units pr.pallet
Theoreticalweight kg
PN bar
Ddmm
DN mm
AVK ref. nos.Type
Series 03/85
Service conn. valvewith tensile resistantsocketconnection/outsidethreadEPDM rubberwedgeEpoxy coatedaccording to DIN30677-2 and GSKguide linesClosing direction:CTCDN 25-32
Note:# 1 1/4" outside thread## 1" outside thread
005
188,00A70316322503-032-83001 #)162,00A70316322503-032-85001 ##)194,00B77316403203-040-84001 ##)204,00A71316403203-040-85001 #)
Gross priceEUR
Deliv.-code
Units pr.pallet
Theoreticalweight kg
PN bar
Ddmm
DN mm
AVK ref. nos.Type
Series 03/65
Service connectionvalveTensile resistantscrew couplings forPE-pipesDuctile ironEPDM rubber wedgeEpoxy coatedaccording to DIN30677-2 and GSKguide linesClosing direction:CTCDN 25-50
005
170,00A70316322503-032-65001187,00A64416403203-040-65001258,00A41616504003-050-65001340,00A36716635003-063-65001
Gross priceEUR
Deliv.-code
Units pr.pallet
Theoreticalweight kg
PN bar
Ddmm
DN mm
AVK ref. nos.Type
Series 16/00
Brass serviceconnection valvewith T-top andbrass tensilecouplingsEPDM rubberwedgeClosingdirection: CTCDN 25-50
010
245,00A216322516-032-00056265,00A316403216-040-00056345,00A316504016-050-00056410,00A416635016-063-00056
Serviceconn. valves
Products for water according to DIN
DIN
23 2007-07-10 10:47 CET
Gross priceEUR
Deliv.-code
Units pr.pallet
Theoreticalweight kg
PN bar
Ddmm
DN mm
AVK ref. nos.Type
Series 16/05
Brass serviceconnection valvewith AVK top andtensile couplingsEPDM rubberwedgeClosing direction:CTCDN 25-40
010
220,00A70216322516-032-05006240,00A64316403216-040-05006330,00A316504016-050-05006
Gross priceEUR
Deliv.-code
Units pr.pallet
Theoreticalweight kg
PN bar
Ddmm
DN mm
AVK ref. nos.Type
Series 11/30
Angle serviceconnection valve w.external thread/tensileresistant socket jointEPDM rubber wedgeEpoxy coated accordingto DIN 30677-2 andGSK guide linesClosing direction: CTCDN 25-50
Note:# 1 1/4" outside
thread## 2" outside thread
010
135,00A80316322511-032-30006 #)138,00B80316322511-032-30056 #)160,00A416403211-040-30006 ##)190,00A616504011-050-30006 ##)240,00A42716635011-063-30006 ##)
Gross priceEUR
Deliv.-code
Units pr.pallet
Theoreticalweight kg
PN bar
Ddmm
DN mm
AVK ref. nos.Type
Series 16/29
Serviceconnection valvewith socketjoints/BSPthreadPOMEPDM rubberwedgeClosingdirection: CTCDN 25-50
Note:# 1 1/2"
outsidethread
## 2" outside thread
010
170,00B116322516-032-290603006 #)212,00B20216403216-040-290704006 ##)235,00B216504016-050-290804006 ##)259,00B416635016-063-290904006 ##)
Serviceconn. valves
Products for water according to DIN
DIN
24 2007-07-10 10:47 CET
Gross priceEUR
Deliv.-code
Units pr.pallet
Theoreticalweight kg
PN bar
Ddmm
DN mm
AVK ref. nos.Type
Series 16/80
Serviceconnection valvewith PE-pipesPOMEPDM rubberwedgeClosingdirection: CTCDN 25-50
Note:# Pipe 200/200 mm, PE 80
010
241,00A24110322516-032-80026 #)261,00A20110403216-040-80026 #)368,00A13310504016-050-80026 #)463,00A11510635016-063-80026 #)
Gross priceEUR
Deliv.-code
Units pr.pallet
Theoreticalweight kg
PN bar
Ddmm
DN mm
AVK ref. nos.Type
Series 03/00
Service connectionvalveInternal threadDuctile ironEPDM rubber wedgeEpoxy coated accordingto DIN 30677-2 andGSK guide linesClosing direction: CTCDN 20-50
Note:# 3/4" inside
thread## 1" inside thread### 1 1/4" inside thread#### 1 1/2" inside thread##### 2" inside thread
010
113,00A96316252003-025-00001 #)123,00A96316322503-032-00001 ##)146,00A80316403203-040-00001 ###)160,00A55516504003-050-00001 ####)218,00A48516635003-063-00001 #####)
Gross priceEUR
Deliv.-code
Units pr.pallet
Theoreticalweight kg
PN bar
Ddmm
DN mm
AVK ref. nos.Type
Series 03/10
Service connectionvalveInternal threadDuctile ironEPDM rubber wedgeEpoxy coated accordingto DIN 30677-2 outside,enamelled to DEVinsideClosing direction: CTCDN 25-50
Note:# 1" inside thread## 1 1/4" inside thread### 1 1/2" inside thread#### 2" inside thread
010
163,00A96316322503-032-10001 #)186,00A80316403203-040-10001 ##)202,00A60516504003-050-10001 ###)306,00A48616635003-063-10001 ####)
Serviceconn. valves
Products for water according to DIN
DIN
25 2007-07-10 10:47 CET
Gross priceEUR
Deliv.-code
Units pr.pallet
Theoreticalweight kg
PN bar
Ddmm
DN mm
AVK ref. nos.Type
Series 03/40/60
Serviceconnection valvefor sidetappingExt./int. threadand tensilesocket jointGrey cast ironEPDM rubberwedgeEpoxy coatedaccording to DIN30677-2 andGSK guide linesClosing direction: CTCDN 25-50
005
141,00A58416322503-032-4000180,00A48416403203-040-4000160,00A60416403203-040-6000220,00A32716504003-050-4000268,00B28816635003-063-4000250,00A28816635003-063-6000
Gross priceEUR
Deliv.-code
Units pr.pallet
Theoreticalweight kg
PN bar
Ddmm
DN mm
AVK ref. nos.Type
Series 03/30
Serviceconnection valvePush in socketsfor PE-pipesDuctile ironEPDM rubberwedgeEpoxy coatedaccording to DIN30677-2 andGSK guide linesClosingdirection: CTCDN 20-50
005
129,00A80316252003-025-3000135,00A64416322503-032-3000160,00A58416403203-040-3000190,00A32716504003-050-3000240,00A25916635003-063-3000
Gross priceEUR
Deliv.-code
Units pr.pallet
Theoreticalweight kg
PN bar
Ddmm
DN mm
AVK ref. nos.Type
Series 16/50
Serviceconnection valvewith tensileresistant socketjointsPOMEPDM rubberwedgeClosing direction:CTCDN 25-50
010
160,00A55116322516-032-50006168,00A45116403216-040-50006220,00A28216504016-050-50006252,00A20516635016-063-50006
Serviceconn. valves
Products for water according to DIN
DIN
26 2007-07-10 10:47 CET
Gross priceEUR
Deliv.-code
Units pr.pallet
Theoreticalweight kg
PN bar
Ddmm
DN mm
AVK ref. nos.Type
Series 03/90
Service connectionvalve with PRKsystem forPE-pipesDuctile ironEPDM rubberwedgeEpoxy coatedaccording to DIN30677-2 and GSKguide linesClosing direction:CTCDN 20-50
005
157,00A64316252003-025-9000160,00A64316322503-032-9000177,00A58316403203-040-9000248,00A41716504003-050-9000300,00A32616635003-063-9000
Gross priceEUR
Deliv.-code
Units pr.pallet
Theoreticalweight kg
PN bar
Ddmm
DN mm
AVK ref. nos.Type
Series 03/93
Service connectionvalve with PRKsystem forPE-pipesDuctile ironEPDM rubberwedgeEpoxy coatedaccording to DIN30677-2 outside,enamelled to DEVinsideClosing direction:CTCDN 20-50
005
197,00B80316252003-025-93001192,00A80316322503-032-93001221,00A60316403203-040-93001300,00A50516504003-050-93001368,00A40616635003-063-93001
Gross priceEUR
Deliv.-code
Units pr.pallet
Theoreticalweight kg
PN bar
Ddmm
DN mm
AVK ref. nos.Type
Series 16/20
Brass serviceconnection valvewith T-top andPRK couplingsClosingdirection: CTCDN 25-50
010
220,00A216322516-032-20056240,00A316403216-040-20056330,00A316504016-050-20056365,00A416635016-063-32056
Serviceconn. valves
Products for water according to DIN
DIN
27 2007-07-10 10:47 CET
Gross priceEUR
Deliv.-code
Units pr.pallet
Theoreticalweight kg
PN bar
Ddmm
DN mm
AVK ref. nos.Type
Series 16/25
Brass serviceconnection valvewithPRK-couplingsEPDM rubberwedgeClosing direction:CTCDN 20-50
010
B216252016-025-25006190,00A216322516-032-25006220,00A316403216-040-25006311,00A316504016-050-25006350,00A416635016-063-25006
Gross priceEUR
Deliv.-code
Units pr.pallet
Theoreticalweight kg
PN bar
Ddmm
DN mm
AVK ref. nos.Type
Series 16/90
Serviceconnection valvewithPRK-couplingsPOMEPDM rubberwedgeClosingdirection: CTCDN 25-50
010
253,00A50116322516-032-90006282,00A42116403216-040-90006337,00A28316504016-050-90006375,00A20416635016-063-90006
Gross priceEUR
Deliv.-code
Units pr.pallet
Theoreticalweight kg
PN bar
Ddmm
DN mm
AVK ref. nos.Type
Series 16/01
Serviceconnection valvePRK/externalconical pipethreadPOMEPDM rubberwedgeClosingdirection: CTCDN 32-40
Note:# 1 1/2"
outsidethread
## 2" outside thread
010
265,00A20216403216-040-010303006 #)319,00B20216403216-040-010304006 ##)351,00A316504016-050-010404006 ##)
Serviceconn. valves
Products for water according to DIN
DIN
28 2007-07-10 10:47 CET
Gross priceEUR
Deliv.-code
Units pr.pallet
Theoreticalweight kg
PN bar
Ddmm
DN mm
AVK ref. nos.Type
Series 11/00
Angle service connectionvalveExternal/internal threadDuctile ironEPDM rubber wedgeEpoxy coated according toDIN 30677-2 and GSKguide linesClosing direction: CTCDN 25-50
010
123,00A80316322511-032-00006146,00A416403211-040-00006160,00A516504011-050-00006218,00A48616635011-063-00006
Gross priceEUR
Deliv.-code
Units pr.pallet
Theoreticalweight kg
PN bar
DN mm
AVK ref. nos.Type
Series 701/10
Automatic air valveSingle actingDN 25
Note:# 1" BSP thread
010
179,00A01625701-032-1099 #)247,00A11625701-032-1199 #)
Gross priceEUR
Deliv.-code
Units pr.pallet
Theoreticalweight kg
PN bar
DN mm
AVK ref. nos.Type
Series 701/20
Automatic air valveSingle actingDN 25
Note:# 1" BSP thread
010
303,00A41625701-032-2091 #)
Gross priceEUR
Deliv.-code
Units pr.pallet
Theoreticalweight kg
PN bar
DN mm
AVK ref. nos.Type
Series 701/30
Single acting airvalveInlet flangeStandard flangedrilling to ISO7005-2, EN1092-2: 1997DN 50-150
Note:# 2" BSP thread
010
565,00A181650701-050-3011514,00A91650701-051-3091 #)928,00A181680701-080-3011
1.446,00A2716100701-100-30114.012,00A7716150701-150-3011
Serviceconn. valves
Air valves
Products for water according to DIN
DIN
29 2007-07-10 10:47 CET
Gross priceEUR
Deliv.-code
Units pr.pallet
Theoreticalweight kg
PN bar
DN mm
AVK ref. nos.Type
Series 701/40
Combination airvalveDouble actingDN 25-50
Note:# 1" BSP thread## 2" BSP thread
010
245,00A11625701-025-4099 #)467,00A11650701-050-4099 ##)578,00A21650701-050-4199 ##)
Gross priceEUR
Deliv.-code
Units pr.pallet
Theoreticalweight kg
PN bar
DN mm
AVK ref. nos.Type
Series 701/50
Combination airvalveDouble actingStandard flangedrilling to ISO7005-2, EN1092-2: 1997DN 50-200
Note:# 2" BSP thread
003
711,00A121650701-050-5011711,00A91650701-051-5091 #)
1.066,00A181680701-080-50111.614,00A2616100701-100-50114.169,00A7816150701-150-50114.897,00A8610200701-200-5001
Gross priceEUR
Deliv.-code
Units pr.pallet
Theoreticalweight kg
PN bar
DN mm
AVK ref. nos.Type
Series 701/60
Combination air valveDouble actingStandard flange drillingto ISO 7005-2, EN1092-2: 1997DN 50-200
Note:# 2" BSP thread
010
756,00A131650701-050-6011756,00A101650701-051-6091 #)
1.148,00A191680701-080-60111.659,00A2716100701-100-60114.367,00A7916150701-150-60115.015,00A8716200701-200-6011
Gross priceEUR
Deliv.-code
Units pr.pallet
Theoreticalweight kg
H3mm
PN bar
DN mm
AVK ref. nos.Type
Series 701/84
Underground air valve installationsystemDN 50
002
2.465,00B97551650701-050-84122.558,00B1010551650701-050-8413
Air valves
Products for water according to DIN
DIN
30 2007-07-10 10:47 CET
Gross priceEUR
Deliv.-code
Units pr.pallet
Theoreticalweight kg
H3mm
PN bar
DN mm
AVK ref. nos.Type
Series 701/84
Underground air valve installationsystemDN 80
003
2.619,00B1110551680701-080-8423
Gross priceEUR
Deliv.-code
Units pr.pallet
Theoreticalweight kg
PN bar
DN mm
AVK ref. nos.Type
Series 29/40
Underground firehydrant to EN1074-6PN 16EPDM rubberwedgeStandard flangedrilling to ISO7005-2, EN 1092-2:1997Epoxy coatedaccording to DIN30677-2 and GSKguide linesDN 100
Note:# With bayonet coupling## With 3" stortz coupling### With 3" NOR coupling#### With 4" stortz coupling
003
713,00A221610029-100-400101 #)1.058,00A211610029-100-400102 ##)1.428,00A211610029-100-400103 ###)1.964,00A211610029-100-400104 ####)
Gross priceEUR
Deliv.-code
Units pr.pallet
Theoreticalweight kg
DN mm
AVK ref. nos.Type
Series 09/20
Fire hydrantAbove groundStortz-Hose-couplingType BAluminiumStandard flange drilling to ISO7005-2, EN1092-2: 1997Epoxy coated according to DIN30677-2 and GSK guide linesDN 80
Note:# Automatic drainage## Manual drainage
001
2.500,00A5608009-080-201021 #)2.700,00A5608009-080-203021 ##)
Air valves
Undergroundhydrants
Above
ground hydrants
Products for water according to DIN
DIN
31 2007-07-10 10:47 CET
Gross priceEUR
Deliv.-code
Units pr.pallet
Theoreticalweight kg
DN mm
AVK ref. nos.Type
Series 09/30
Fire hydrantAbove groundStortz-Hose-couplingType BDuctile ironStandard flange drilling to ISO7005-2, EN1092-2: 1997Epoxy coated according to DIN30677-2 and GSK guide linesDN 80
Note:# Automatic drainage## Manual drainage
001
2.600,00A5658009-080-301027 #)2.800,00A5658009-080-303027 ##)
Gross priceEUR
Deliv.-code
Units pr.pallet
Theoreticalweight kg
DN mm
AVK ref. nos.Type
Series 09/50
Fire hydrantAbove groundManual drainageType AAluminiumStandard flange drilling toISO 7005-2, EN1092-2:1997Epoxy coated according toDIN 30677-2 and GSKguide linesDN 100
001
3.600,00A68310009-100-5030
Gross priceEUR
Deliv.-code
Units pr.pallet
Theoreticalweight kg
PN bar
DN mm
AVK ref. nos.Type
Series 84/70
Fire hydrant DN 80above groundStainless steelModel P6PN 16Polyurethan vulcanized plugStandard flange drilling toISO 7005-2, EN 1092-2:1997Epoxy coated according toDIN 30677-2 and GSK guidelinesClosing direction: CTCDN 80
001
1.558,00B688084-080-70311011051.565,00B788084-080-7041101105
Above
ground hydrants
Products for water according to DIN
DIN
32 2007-07-10 10:47 CET
2007-01-01
Products for water according to DIN Price list 2007
Hyd
rants
Type AVK ref. nos. DN PN Weight Units Deliv.- Gross price mm bar kg pr. pallet code Euro
Series 35/40
Underground fire hydrant, PN 16DN 80750-1000 mm
Series 35/60
Underground fire hydrant, to DIN 3221-AD1-80PN 16DN 80800-1500 mmDIN - DVGW approved
Pipe cover mm 35-080-40-11001 80 750 16 24.5 B 674 35-080-40-21001 80 1000 16 29.5 B 738
Pipe cover mm 35-080-50-11001 80 750 16 24.5 B 674 35-080-50-21001 80 1000 16 29.5 B 738
Pipe coverFlange connection - Epoxy coating mm35-080-6011002 80 800 16 34.5 B 86935-080-6021002 80 1000 16 37.5 B 93535-080-6031002 80 1250 16 42.5 B 1,01035-080-6041002 80 1500 16 48.5 B 1,214
Flange connection - Enamelled internally35-080-601100270 80 800 16 34.5 B 88635-080-602100270 80 1000 16 37.5 B 95435-080-603100270 80 1250 16 42.5 B 1,03035-080-604100270 80 1500 16 48.5 B 1,238
Bayo connection - Epoxy coating35-080-6019002 80 800 16 32.0 B 1,19535-080-6029002 80 1000 16 35.0 B 1,21435-080-6039002 80 1250 16 40.0 B 1,29235-080-6049002 80 1500 16 46.0 B 1,483
Bayo connection - Enamelled internally35-080-601900270 80 800 16 32.0 B 1,21935-080-602900270 80 1000 16 35.0 B 1,23835-080-603900270 80 1250 16 40.0 B 1,31835-080-604900270 80 1500 16 46.0 B 1,514
35-000-99 B 33Series 35/99
Flex drain for underground fire hydrant AVK series 35/40, 35/50 and 35/60
Series 35/50
Underground fire hydrant, to KIWA BRL-K614/01 and BRL-K649/01with non-return devicePN 16DN 80750-1000 mm
Options:- Alternative drilling to DIN 1882- Alternative cover (self-closing cover or plastic cover)
DIN
2007-01-01
Hyd
rants
Products for water according to DIN Price list 2007
Type AVK ref. nos. Pipe cover Gross price mm Coating Euro
Series 84/20-22
Post hydrants in break-away design with additional ball shut-offModel P5 red, with drop jacket, white - red - white,DIN 3222 AFUD 100-16, DN 100 mm, DIN-DVGW-Reg.-Nr. NW-6411 AU 2085
DN Outlet side center AFUD 100 84-100-20-211013 100 2 x B 1 x A 1000 Email/EKB red 2,69284-100-20-311013 100 2 x B 1 x A 1250 Email/EKB red 2,76584-100-20-411013 100 2 x B 1 x A 1500 Email/EKB red 2,794
AFUD 100 84-100-22-211013 100 2 x B 1000 Email/EKB red 2,69284-100-22-311013 100 2 x B 1250 Email/EKB red 2,76584-100-22-411013 100 2 x B 1500 Email/EKB red 2,794
DN Outlet Side center AUD 80 84-080-00-211010 80 2 x B 1000 Email/EKB red 1,557 84-080-00-311010 80 2 x B 1250 Email/EKB red 1,624 84-080-00-411010 80 2 x B 1500 Email/EKB red 1,671
84-080-00-211060 80 2 x B 1000 Email/Email blue 1,61084-080-00-311060 80 2 x B 1250 Email/Email blue 1,68284-080-00-411060 80 2 x B 1500 Email/Email blue 1,729
AUD 100 84-100-10-211010 100 2 x B 1 x A 1000 Email/EKB red 1,894 84-100-10-311010 100 2 x B 1 x A 1250 Email/EKB red 1,959 84-100-10-411010 100 2 x B 1 x A 1500 Email/EKB red 1,987
84-100-10-211060 100 2 x B 1 x A 1000 Email/Email blue 1,96684-100-10-311060 100 2 x B 1 x A 1250 Email/Email blue 2,02984-100-10-411060 100 2 x B 1 x A 1500 Email/Email blue 2,059
AUD 100 84-100-12-211010 100 2 x B 1000 Email/EKB red 1,894 84-100-12-311010 100 2 x B 1250 Email/EKB red 1,959 84-100-12-411010 100 2 x B 1500 Email/EKB red 1,987 100 2 x B 1000 Email/Email blue 1,966 100 2 x B 1250 Email/Email blue 2,029 100 2 x B 1500 Email/Email blue 2,059
Series 84/00-10-12
Post hydrants in break-away design with additional ball shut-offModel P5, red, without drop jacket, DIN 3222 AUD 80/100 - 16, DN 80/100 mm,DIN-DVGW-Reg.-Nr.: NW-6411 AS 2286, NW-6411 AS 2287
DIN
2007-01-01
Hyd
rants
Products for water according to DIN Price list 2007
DIN
Type AVK ref. nos. Pipe cover Gross price mm Coating Euro
DN Outlet side center AUD 80 84-080-40-211011 80 2 x B - 1000 Email/EKB red 1,55784-080-40-311011 80 2 x B - 1250 Email/EKB red 1,624 84-080-40-411011 80 2 x B - 1500 Email/EKB red 1,671
84-080-40-211061 80 2 x B - 1000 Email/Email blue 1,61084-080-40-311061 80 2 x B - 1250 Email/Email blue 1,68284-080-40-411061 80 2 x B - 1500 Email/Email blue 1,729
AUD 100 84-100-50-211011 100 2 x B 1 x A 1000 Email/EKB red 1,894 84-100-50-311011 100 2 x B 1 x A 1250 Email/EKB red 1,959 84-100-50-411011 100 2 x B 1 x A 1500 Email/EKB red 1,987
84-100-50-211061 100 2 x B 1 x A 1000 Email/Email blue 1,96684-100-50-311061 100 2 x B 1 x A 1250 Email/Email blue 2,02984-100-50-411061 100 2 x B 1 x A 1500 Email/Email blue 2,059
Series 84/40-50
Post hydrants in break-away design with additional ball shut-offModel P5 - ”NOSTALGIA”, DIN 3222 AUD 80/100 - 16, DN 80/100 mm, DIN-DVGW-Reg.-Nr. NW 6411 BM 0125
2007-01-01
Hyd
rants
Products for water according to DIN / NF Price list 2007
Type AVK ref. nos. DN H Weight Deliv.- Gross price mm mm kg code Euro
Series 78/7111
Pillar Fire hydrant “VEGA-STOP”GGG-503 outletsFrostproofAutomatic drain
Série 78/7112
“VEGA-REC”
78-080-7106-100 80 100 84.0 C 96178-100-7106-100 100 100 95.0 C 1,00978-150-7106-100 150 100 140.0 C 2,235
78-100-7106-125 100 125 127.0 C 1,197
78-080-7111-100 80 100 92.0 C 1,130 78-100-7111-100 100 100 112.0 C 1,178 78-100-7111-125 100 125 127.0 C 1,366
VEGA-REC 78-100-7112-100 100 100 105.0 C 1,178
78-080-7120-100 80 100 100.0 C 1,322 78-100-7120-100 100 100 111.0 C 1,393 78-100-7120-125 100 125 137.0 C 1,581
78-080-7121-100 80 100 107.0 C 1,491 78-100-7121-100 100 100 118.0 C 1,540
78-100-7122-100 100 100 130.0 C 1,540
78-709-00429 Operating key 1.5 C 27
78-000-7915-000 Metallic cover 18.0 C 384
78-KITSECURIT Repair kit, (breakable flange) 5.0 C 114
PHENIX:
78-100-7135-100 100 100 143.0 C 1,273
PHENIX-REC: 78-100-7145-100 100 100 151.0 C 1,486
Series 78/7120Pillar fire hydrant “ORION” with metalic cover
Série 78/7121“ORION-STOP”
Série 78/7122“ORION-REC”
Accessories
Used for all hydrants
DIN
/ NF
Series 78/7106
Pillar Fire hydrant “VEGA”DN 80-100: GGG-50DN 150: GG-253 outletsFrostproofAutomatic drain
Series 78/7135
Pillar fire hydrant “PHENIX” GG-253 outletsFrostproofAutomatic drain
Série 78/7145
“PHENIX-REC”
2007-01-01
Hyd
rants
Products for water according to DIN / NF Price list 2007
Type AVK ref. nos. DN H Weight Deliv.- Gross price mm mm kg code Euro
Series 78/75XX
Fountain postVICTORIAGG-25Automatic drain on frostproof models
Series 78/741X
Sprinkling hydrantLICORNEGG-25FrostproofAutomatic drain
Series 78/742X
Sprinkling hydrantLYREGG-25
Series 78/7310
Underground fire and sprinkling hydrantDELPHINEGG-25
Series 78/7305
Underground fire and sprinkling hydrantDAUPHINEGG-25FrostproofAutomatic drain
Without outlet:78-040-7510-100 40 100 100.0 C 1,479
With outlet: 78-040-7511-100 40 100 100.0 C 1,719
Garden Fountain: 78-020-7520-000 25 62.0 C 1,098
78-040-7305-080 40 Sym. 29.0 C 37878-080-7305-100 80 Sym. 87.0 C 79378-100-7305-000 100 Sym. 99.0 C 92578-100-7305-100 100 Keyser 99.0 C 925
78-040-7310-000 40 Sym. 16.0 C 26578-080-7310-000 80 Sym. 50.0 C 56978-100-7310-100 100 Sym. 71.0 C 79978-100-7310-000 100 Keyser 71.0 C 799
With stem cap:78-025-7410-060 25 10.0 C 212
With handwheel: 78-025-7411-060 25 10.0 C 212
With stem cap:78-025-7420-000 25 5.5 C 143
With handwheel: 78-025-7421-000 25 5.5 C 143
DIN
/ NF
Gross priceEUR
Deliv.-code
Units pr.pallet
Theoreticalweight kg
PN bar
DN mm
AVK ref. nos.Type
Series 41/60
Swing checkvalve with freeshaft endEPDM rubberwedgeStandard flangedrilling to ISO7005-2,EN1092-2: 1997Epoxy coatedaccording to DIN30677-2 andGSK guide linesDN 50-300
003
662,00A181310/165041-050-60018742,00A151510/166541-065-60018
1.000,00A92410/1610041-100-600181.261,00A83810/1612541-125-600181.617,00A84610/1615041-150-600182.571,00A5781020041-200-600082.625,00B5781620041-200-600185.069,00A11831025041-250-600085.153,00B11831625041-250-600185.992,00A12311030041-300-600086.108,00B12311630041-300-60018
Gross priceEUR
Deliv.-code
DN/DNmm
DN mm
AVK ref. nos.Type
Series 41/23
Swing checkvalve lever andweight kitEpoxy coatedaccording to DIN30677-2 andGSK guide linesDN 100-300
001
111,00A100-10010041-100-23000155,00A125-15015041-150-23000155,00A200-20020041-200-23000448,00A250-30030041-300-23000
Gross priceEUR
Deliv.-code
Theoreticalweight kg
DN mm
AVK ref. nos.Type
Series 41/32
Swing checkvalve spring kitEpoxy coatedaccording to DIN30677-2 andGSK guide linesDN 50-300
001
481,00A15041-050-32000483,00A16541-065-32000111,00A38041-080-230000000463,00A18041-080-32000478,00A110041-100-32000523,00A112541-125-32000523,00A115041-150-32000527,00A220041-200-32000
1.596,00A330041-300-32000
Gross priceEUR
Deliv.-code
Units pr.pallet
Theoreticalweight kg
PN bar
Dmm
DN mm
AVK ref. nos.Type
Series 10/00
Tapping saddlefor PVC andPE-pipesMetric sizeEpoxy coatedaccording to DIN30677-2 andGSK guide linesDN 50-300
Note:# 3/4" BSP thread
001
56,00A114116505010-050-40011 #)66,00A75216635010-063-40011 #)74,00A70216756510-075-40011 #)76,00A63316908010-090-40011 #)79,00A5631611010010-110-40011 #)80,00A4541612512510-125-40011 #)91,00A4051614012510-140-40011 #)
100,00A3361616015010-160-40011 #)180,00A71618015010-180-40011 #)160,00A12101620020010-200-40011 #)180,00A10101622520010-225-40011 #)207,00A1101625025010-250-40011 #)206,00A141628025010-280-40011 #)241,00A141631530010-315-40011 #)
Check valves
Tappingsaddles
Products for water according to DIN
DIN
33 2007-07-10 10:47 CET
Gross priceEUR
Deliv.-code
Units pr.pallet
Theoreticalweight kg
PN bar
Dmm
DN mm
AVK ref. nos.Type
Series 10/00
Tapping saddlefor PVC andPE-pipesMetric sizeEpoxy coatedaccording to DIN30677-2 andGSK guide linesDN 50-300
Note:# 1" BSP thread
002
56,00A114116505010-050-00011 #)66,00A75216635010-063-00011 #)74,00A70216756510-075-00011 #)76,00A63316908010-090-00011 #)79,00A5631611010010-110-00011 #)80,00A4541612512510-125-00011 #)91,00A4051614012510-140-00011 #)
100,00A3361616015010-160-00011 #)180,00A71618015010-180-00011 #)160,00A12101620020010-200-00011 #)180,00A10101622520010-225-00011 #)207,00A1101625025010-250-00011 #)206,00A141628025010-280-00011 #)241,00A141631530010-315-00011 #)
Gross priceEUR
Deliv.-code
Units pr.pallet
Theoreticalweight kg
PN bar
Dmm
DN mm
AVK ref. nos.Type
Series 10/00
Tapping saddlefor PVC andPE-pipesMetric sizeEpoxy coatedaccording to DIN30677-2 andGSK guide linesDN 50-300
Note:# 1 1/4" BSP thread
003
66,00A75216635010-063-10011 #)74,00A70216756510-075-10011 #)76,00A63316908010-090-10011 #)79,00A5631611010010-110-10011 #)80,00A4541612512510-125-10011 #)91,00A4051614012510-140-10011 #)
100,00A3361616015010-160-10011 #)180,00A71618015010-180-10011 #)160,00A12101620020010-200-10011 #)180,00A10101622520010-225-10011 #)207,00A1101625025010-250-10011 #)206,00A141628025010-280-10011 #)241,00A5041631530010-315-10011 #)
Gross priceEUR
Deliv.-code
Units pr.pallet
Theoreticalweight kg
PN bar
Dmm
DN mm
AVK ref. nos.Type
Series 10/00
Tapping saddlefor PVC andPE-pipesMetric sizeEpoxy coatedaccording to DIN30677-2 andGSK guide linesDN 50-300
Note:# 1 1/2" BSP thread
004
66,00A75216635010-063-20011 #)74,00A70216756510-075-20011 #)76,00A63316908010-090-20011 #)79,00A5631611010010-110-20011 #)80,00A4541612512510-125-20011 #)91,00A4051614012510-140-20011 #)
100,00A3361616015010-160-20011 #)180,00A71618015010-180-20011 #)160,00A12101620020010-200-20011 #)180,00A10101622520010-225-20011 #)207,00A1101625025010-250-20011 #)206,00A141628025010-280-20011 #)241,00A141631530010-315-20011 #)
Gross priceEUR
Deliv.-code
Units pr.pallet
Theoreticalweight kg
PN bar
Dmm
DN mm
AVK ref. nos.Type
Series 10/00
Tapping saddlefor PVC andPE-pipesMetric sizeEpoxy coatedaccording to DIN30677-2 andGSK guide linesDN 50-300
Note:# 2" BSP thread
005
66,00A75216635010-063-30011 #)74,00A70216756510-075-30011 #)76,00A63316908010-090-30011 #)79,00A5631611010010-110-30011 #)80,00A4541612512510-125-30011 #)91,00A4051614012510-140-30011 #)
100,00A336166315010-160-30011 #)180,00A71618015010-180-30011 #)160,00A12101620020010-200-30011 #)180,00A10101622520010-225-30011 #)207,00A1101625025010-250-30011 #)206,00A141628025010-280-30011 #)241,00A141631530010-315-30011 #)
Tappingsaddles
Products for water according to DIN
DIN
34 2007-07-10 10:47 CET
2007-01-01
Products for water according to DIN Price list 2007
Tappin
g
saddle
s
Type AVK ref. nos. DN D. ext. Weight Gross price mm BSP kg Euro
10-9-5500-080-04081 80-300 40 1 1/2” 9,8 433
DN Range10-9-0002-104-00009 80 89-104 6110-9-0002-130-00009 100 108-130 6310-9-0002-159-00009 125 133-159 6610-9-0002-190-00009 150 159-190 6710-9-0002-252-00009 200 216-252 7510-9-0002-308-00009 250 267-308 7810-9-0002-368-00009 300 318-368 84
Series 10/9 Stirrup
Flexible stirrup, rubber lined for ductile iron- steel- and asbestos cement pipes acc. to DIN 3543to be used for 10/9 MMG, SV-G, SV-ST
DIN
Series 10/9, MMG
Under pressure drilling tapping saddle with integrated shut off and fraiser for ductile iron pipes acc to DIN 3543External epoxy coatingInternal enameledMax torque 100 Nmmax speed 200 rpm
2007-01-01
Products for water according to DIN Price list 2007
Tappin
g
saddle
s
DN 25 - 1” 10-9-2005-090-02081 80 90 8.5 23310-9-2005-110-02081 100 110 10.5 23410-9-2005-140-02081 125 140 /125 11.5 25710-9-2005-160-02081 150 160 12.5 26710-9-2005-225-02081 200 225 15.5 28910-9-2107-280-02081 250 280 19.0 40510-9-2107-315-02081 300 315 21.5 424
DN 32 - 1 1/4”
10-9-2005-090-03081 80 90 8.5 233 10-9-2005-110-03081 100 110 10.5 23410-9-2005-140-03081 125 140 /125 11.5 25710-9-2005-160-03081 150 160 12.5 26710-9-2005-225-03081 200 225 15.5 28910-9-2107-280-03081 250 280 18.5 40510-9-2107-315-03081 300 315 21.0 424
DN 40 - 1 1/2”10-9-2005-090-04081 80 90 8.5 23310-9-2005-110-04081 100 110 10.5 23410-9-2005-140-04081 125 140 /125 11.5 25710-9-2005-160-04081 150 160 12.5 26710-9-2005-225-04081 200 225 15.5 28910-9-2107-280-04081 250 280 18.5 40510-9-2107-315-04081 300 315 21.0 424
DN 50 - 2”10-9-2007-110-05081 100 110 13.5 35410-9-2007-125-05081 125 140 /125 - 38010-9-2007-160-05081 150 160 15.5 380 10-9-2007-225-05081 200 225 18.0 38710-9-2107-280-05081 250 280 22.0 44410-9-2107-315-05081 300 315 23.0 462
Series 10/9, SVK
Under pressure drilling tapping saddle with integrated disc shut offfor PVC pipes acc to 3543PN 16External epoxy coatingInternal enameledThreaded outlet
Type AVK ref. nos. DN D. ext. Weight Gross price mm kilos Euro D
IN
2007-01-01
Products for water according to DIN Price list 2007
Tappin
g
saddle
s
Type AVK ref. nos. DN D. ext. Weight Gross price mm mm kg Euro
DN 25 - 1” 10-9-5007-063-02081 50 63 4.5 233 10-9-5007-075-02081 65 75 5.0 22810-9-5107-090-02081 80 90 6.0 22910-9-5107-110-02081 100 110 6.5 23810-9-5107-140-02081 125 140 7.0 27710-9-5107-160-02081 150 160 8.0 277
DN 32 - 11/4”10-9-5007-063-03081 50 63 4.5 223 10-9-5007-075-03081 65 75 5.0 22810-9-5107-090-03081 80 90 6.0 22910-9-5107-110-03081 100 110 6.5 23810-9-5107-140-03081 125 140 7.0 27710-9-5107-160-03081 150 160 8.0 277
DN 40 - 11/2”10-9-5107-090-04081 80 90 6.0 22910-9-5107-110-04081 100 110 6.5 23810-9-5107-140-04081 125 140 7.0 27710-9-5107-160-04081 150 160 8.0 277
DIN
Series 10/9, F
Under pressure drilling tapping saddle with integrated shut offfor PVC pipes acc to 3543PN 16External epoxy coatingInternal enameledThreaded outlet
2007-01-01
Products for water according to DIN Price list 2007
Tappin
g
saddle
s
Type AVK ref. nos. DN Weight Gross price mm kg Euro
Series 10/9, MVK
Under pressure drilling tapping saddle with shut offfor PVC-pipesValve in brass, saddle in GGGStirrup in SSPN 16
Series 10/9, MVS
Under pressure tapping saddle with integrated shut offFor ductile iron- steel and asbestos cement pipesValve in brassSaddle in GGG, epoxy coated Stirrup in SSPN 16Threaded outlet.
Series 10/9, MVE
Valve for under pressure drilling tapping saddleBrass CuZn40Pb2 Threaded connectionsPN 16
. DN 40 - 1 1/2” DN da 10-9-4107-090-04080 80 90 6.0 208 10-9-4107-110-04080 100 110 6.5 211 10-9-4107-140-04080 125 140 7.5 214 10-9-4107-160-04080 150 160 8.0 215 10-9-4107-225-04080 200 225 10.0 257 10-9-4107-280-04080 250 280 16.0 339 10-9-4107-315-04080 300 315 18.0 359
DN 40 - 1 1/2” DN Saddle10-9-4203-106-04080 80 A 5.5 176 10-9-4203-126-04080 100 A 6.0 176 10-9-4203-152-04080 125 A 6.0 176 10-9-4203-178-04080 150 A 6.0 176 10-9-4203-234-04080 200 B 7.0 185 10-9-4203-286-04080 250 B 7.0 186 10-9-4203-334-04080 300 B 7.0 186 10-9-4203-386-04080 400 B 7.5 On request 10-9-4203-365-04080 400 B 7.5 On request
DN 40 - 1 1/2” Saddle with rubber10-9-4204-106-04080 80 A 5.5 18510-9-4204-126-04080 100 A 6.0 18510-9-4204-152-04080 125 A 6.0 18510-9-4204-178-04080 150 A 6.0 185 10-9-4204-234-04080 200 B 7.0 19110-9-4204-286-04080 250 B 7.0 20110-9-4204-334-04080 300 B 7.0 20110-9-4204-386-04080 400 B 7.5 On request 10-9-4204-365-04080 400 B 7.5 On request
For DN 80-150: Saddle AFor DN 200-400: Saddle B
10-9-4000-010-04089 2.0 115
DIN
Gross priceEUR
Deliv.-code
DN/DNmm
AVK ref. nos.Type
Series 10/10
SMHM universaltapping saddlefor service ballvalveDN 32-300
001
78,00B37-4210-042-1051060067,00B47-5210-052-1051060094,00B47-6010-060-1051060067,00B58-7110-071-1051060074,00B58-7110-071-1061060067,00B68-8810-088-1051060074,00B68-8810-088-1061060067,00B87-10910-109-1051060074,00B87-10910-109-1061060067,00B106-12810-128-1051060076,00B106-12810-128-1061060078,00B131-15210-152-1051060085,00B131-15210-152-1061060083,00B157-18210-182-1051060092,00B157-18210-182-10610600
101,00B191-20710-207-10510600112,00B191-20710-207-10610600107,00B216-23410-234-10510600123,00B216-23410-234-10610600136,00B239-26710-267-10510600150,00B239-26710-267-10610600134,00B269-28810-288-10510600141,00B269-28810-288-10610600159,00B291-31110-311-10510600170,00B291-31110-311-10610600150,00B310-33610-336-10510600163,00B310-36610-336-10610600
Gross priceEUR
Deliv.-code
Units pr.pallet
Theoreticalweight kg
PN bar
DN mm
AVK ref. nos.Type
Series 05/01
Combi-flange for D.I.PVC- and PE-pipesStandard flangedrilling to ISO 7005-2,EN1092-2: 1997Epoxy coatedaccording to DIN30677-2 and GSKguide linesDN 50-600
001
43,00A120210/165005-050-210025,00A140310/166505-060-210027,00A140310/166505-060-220045,00A140210/166505-065-210029,00A150210/168005-080-210036,00A184310/1610005-100-210064,00A105510/1612505-125-210055,00A105510/1612505-125-220065,00A84510/1615005-150-2100
101,00A4281020005-200-2100117,00A4281020005-200-2400101,00A4281620005-200-4100117,00A4281620005-200-4400157,00A30141025005-250-2100185,00A30141025005-250-2400163,00A30141025005-250-4100184,00A30141625005-250-4400227,00A15201030005-300-2100241,00A15201030005-300-2400250,00A15201630005-300-4100260,00A15201630005-300-4400357,00A10301040005-400-2100348,00A10301040005-400-2400652,00A1521050005-500-2100608,00A1521050005-500-2200828,00A1521650005-500-4200873,00A1801060005-600-2200
Tappingsaddles
Couplings
Products for water according to DIN
DIN
35 2007-07-10 10:47 CET
Gross priceEUR
Deliv.-code
Units pr.pallet
Theoreticalweight kg
Dmm
DN mm
AVK ref. nos.Type
Series 05/02
Standard sealingring for PE-pipesDN 50-600
002
16,00A1200635005-050-031020,00A1402756505-065-031027,00A1503908005-080-031027,00A184311010005-100-031046,00A105614012505-125-031042,00A105612512505-125-131046,00A84616015005-150-031084,00A421020020005-200-031059,00A42922520005-200-1310
119,00A301625025005-250-031085,00A301628025005-250-1310
104,00A152231530005-300-0310400,00A103840040005-400-0310550,00A15950050005-500-0310600,00A18663060005-600-0310
Gross priceEUR
Deliv.-code
Units pr.pallet
Theoreticalweight kg
Dmm
DN mm
AVK ref. nos.Type
Series 05/03
Standard sealingring for ductileiron pipesDN 50-600
003
16,00A1200655005-050-021035,00A1400826505-065-021025,00A1500988005-080-021025,00A184011810005-100-021075,00A105114412505-125-021064,00A84117015005-150-021080,00A42122220005-200-0210
116,00A30227425005-250-0210103,00A15232630005-300-0210245,00A10442840005-400-0210374,00A1453250005-500-0210401,00A1563660005-600-0210
Gross priceEUR
Deliv.-code
Units pr.pallet
Theoreticalweight kg
Dmm
DN mm
AVK ref. nos.Type
Series 05/04
Non-tensileresistant sealingring forD.I.-pipesAcc. to EN 545DN 65-300
004
51,00A2826505-065-026042,00A3988005-080-026038,00A411810005-100-026066,00A514412505-125-026068,00A717015005-150-026088,00A1122220005-200-0260
109,00A1727425005-250-0260151,00A2332630005-300-0260
Gross priceEUR
Deliv.-code
Units pr.pallet
Theoreticalweight kg
Dmm
DN mm
AVK ref. nos.Type
Series 05/05
Tensile resistantsealing ring forPVC-ppipesDN 50-300
005
55,00A1200635005-063-5001166,00A1401756505-075-5001169,00A1501908005-090-5001172,00A184111010005-110-50011
176,00A105212512505-125-50011199,00A105214012505-140-50011159,00A84216015005-160-50011354,00A42420020005-200-50011293,00A42322520005-225-50011503,00A30625025005-250-50011387,00A30328025005-280-50011534,00A15631530005-315-50011
Couplings
Products for water according to DIN
DIN
36 2007-07-10 10:47 CET
Gross priceEUR
Deliv.-code
Units pr.pallet
Theoreticalweight kg
Dmm
DN mm
AVK ref. nos.Type
Series 05/06
Tensile resistantsealing ring forD.I.-pipesAcc. to EN 545DN 65-300
Note:# Not to EN 545
006
142,00A1202666505-066-5011695,00A1402776505-077-50116
104,00A1402826505-082-5011682,00A1503988005-098-5011675,00A184411810005-118-50116
146,00A105614412505-144-50116131,00A84617015005-170-50116163,00A421022220005-222-50116306,00A301827425005-274-50111 #)347,00A152532630005-326-50111 #)
Gross priceEUR
Deliv.-code
Units pr.pallet
Theoreticalweight kg
Dmm
DN mm
AVK ref. nos.Type
Series 05/07
Tensile resistantsealing ring forPE-pipesDN 50-300
007
55,00A1200635005-063-5031165,00A1401756505-075-5031168,00A1501908005-090-5031172,00A184111010005-110-50311
178,00A105212512505-125-50311200,00A105114012505-140-50311162,00A84216015005-160-50311357,00A42420020005-200-50311296,00A421222520005-225-50311506,00A302025025005-250-50311391,00A301828025005-280-50311539,00A152631530005-315-50311
Gross priceEUR
Deliv.-code
Units pr.pallet
Theoreticalweight kg
Dmm
DN mm
AVK ref. nos.Type
Series 05/08
Support bush forPE-pipesDN 250-300
Note:# For PE80, PN
6.3 andPE100, PN 10
008
138,00A128025005-280-73000 #)149,00A131530005-315-73000 #)
Gross priceEUR
Deliv.-code
Units pr.pallet
Theoreticalweight kg
Dmm
DN mm
AVK ref. nos.Type
Series 05/08
Support bush forPE-pipesDN 125-300
Note:# For PE80, PN
10 and PE100,PN 16
009
98,00A012512505-125-74000 #)98,00B014012505-140-74000 #)
138,00A128025005-280-74000 #)149,00A131530005-315-74000 #)
Couplings
Products for water according to DIN
DIN
37 2007-07-10 10:47 CET
Gross priceEUR
Deliv.-code
Dmm
DN mm
AVK ref. nos.Type
Series 51/03
SMHM serviveball valve forPE- anduPVC-pipesStraight boreBody in bronzeNF approvedDN 20-40
Note:# Thread:
M40x3## Thread: M55x3
001
93,00B252051-020-03000 #)100,00B322051-020-03001 #)221,00B403251-032-03012 ##)221,00B503251-032-03013 ##)257,00B504051-040-03013 ##)319,00B634051-040-03014 ##)
Gross priceEUR
Deliv.-code
Dmm
DN mm
AVK ref. nos.Type
Series 51/04
SMHM serviveball valveuniversal typeforPE/uPVC-pipesStraight boreBody in bronzeNF approvedDN 20-40
Note:# Thread: M40x3## Thread: M55x3
001
156,00B252051-020-04000 #)170,00B322051-020-04001 #)520,00B403251-032-04012 #)527,00B504051-040-04013 ##)
Others
Products for water according to DIN
DIN
38 2007-07-10 10:47 CET
2007-01-01
Certific
ate
s
Valve certificates for water Price list 2007
DIN
Series 95
Factory certificate 2.2according to EN 10204 with attachment
Series 95
Factory certificate 2.2 according to EN 10204 without attachment
Series 95
Factory certificate 3.1 according to EN 10204 with attachment
Series 95
Factory certificate 2.2 according to EN 10204 without attachment
Series 95
Certificate of conformity
Series 95
Factory certificate 3.1 according to EN 10204 without attachment
Nett. price per shipment9512210 25
Nett. price per shipment9512200 5
Nett. price per valve9513110 5
Nett. price per valve 9513100 3
Nett. price per shipment9532200 25
Nett. price per shipment9540000 20
NOTE: PRICES FOR CERTIFICATES ARE NETT. PRICES
Gross priceEUR
Deliv.-code
Units pr.pallet
Theoreticalweight kg
PN bar
DN mm
AVK ref. nos.Type
Series 02/76
Flanged gate valveFace to face DIN F5Ductile ironPos-indicator &handwheelEPDM rubber wedgeStandard flange drillingto ISO 7005-2,EN1092-2: 1997Epoxy coatedaccording to DIN30677-2 and GSKguide linesClosing direction: CTCDN 40-400
Note:# Valve having an increased bore (400 mm)
003
396,00B1110/164002-040-76016404,00B201210/165002-050-76016525,00B1510/166502-065-76016530,00B141910/168002-080-76016611,00B122510/1610002-100-76016995,00B93310/1612502-125-76016
1.010,00B84910/1615002-150-760161.785,00B6701020002-200-760062.512,00B41101025002-250-760062.596,00B41101625002-250-760163.622,00B21601030002-300-760066.926,00B23201035002-350-76006 #)7.166,00B23201035002-350-76016 #)8.608,00B23421040002-400-760068.883,00B23421640002-400-76016
Gross priceEUR
Deliv.-code
Units pr.pallet
Theoreticalweight kg
PN bar
DN mm
AVK ref. nos.Type
Series 06/34
Flanged gate valveFace to face DIN F4Ductile ironAISI 316 stemEPDM rubber wedgeStandard flange drilling toISO 7005-2, EN1092-2:1997Epoxy coated according toDIN 30677-2 and GSKguide linesClosing direction: CTCDN 40-400
003
214,00B361010/164006-040-34016224,00B361110/165006-050-34016307,00B301410/166506-065-34016371,00B202310/1610006-100-34016650,00B104610/1615006-150-34016
1.161,00B10651020006-200-340061.213,00B10651620006-200-340161.771,00B81021025006-250-340061.851,00B81021625006-250-340162.419,00B61491030006-300-340062.579,00B61491630006-300-340165.049,00B22031035006-350-340065.289,00B22031635006-350-340166.731,00B12151040006-400-340067.057,00B12151640006-400-34016
Gross priceEUR
Deliv.-code
Units pr.pallet
Theoreticalweight kg
PN bar
DN mm
AVK ref. nos.Type
Series 06/80
Flanged gate valveFace to face DIN F4Ductile ironNBR rubber wedgeStandard flange drilling toISO 7005-2, EN1092-2:1997Epoxy coated according toDIN 30677-2 and GSKguide linesClosing direction: CTCDN 50-400
003
198,00A361310/165006-050-80012276,00A301610/166506-065-80012276,00A202010/168006-080-80012325,00A202710/1610006-100-80012559,00A153610/1612506-125-80012559,00A104510/1615006-150-80012973,00A10751020006-200-80002
1.213,00B10751620006-200-800121.526,00A81091025006-250-800022.244,00B61491630006-300-800126.508,00A13191040006-400-80002
Gate valves
Products for sewage according to DIN
DIN
39 2007-07-10 10:47 CET
Gross priceEUR
Deliv.-code
Units pr.pallet
Theoreticalweight kg
PN bar
DN mm
AVK ref. nos.Type
Series 06/84
Flanged gate valveFace to face DIN F4Ductile ironAISI 316 stemNBRNBR rubber wedge withDVGW KTW approvalStandard flange drilling toISO 7005-2, EN1092-2:1997Epoxy coated according toDIN 30677-2 and GSKguide linesClosing direction: CTCDN 40-400
003
214,00B361010/164006-040-84013224,00B361110/165006-050-84013307,00B301410/166506-065-84013318,00B201810/168006-080-84013371,00B202310/1610006-100-84013621,00B153110/1612506-125-84013650,00B104610/1615006-150-84013
1.161,00B10651020006-200-840031.213,00B10651620006-200-840131.771,00B81021025006-250-840031.851,00B81021625006-250-840132.419,00B61491030006-300-840032.579,00B61491630006-300-840135.049,00B22031035006-350-840035.289,00B22031635006-350-840136.731,00B12151040006-400-840037.057,00B12151640006-400-84013
Gross priceEUR
Deliv.-code
Units pr.pallet
Theoreticalweight kg
PN bar
DN mm
AVK ref. nos.Type
Series 06/89
Flanged gate valve with risingstemFace to face DIN F4Ductile ironEPDM rubber wedgeStandard flange drilling to ISO7005-2, EN1092-2: 1997Epoxy coated according toDIN 30677-2 and GSK guidelinesClosing direction: CTCDN 50-250
003
615,00A361210/165006-050-89014704,00A301610/166506-065-89014704,00A201910/168006-080-89014826,00A203310/1610006-100-89014
1.151,00A105310/1615006-150-890141.620,00A841020006-200-890042.374,00A951025006-250-89004
Gross priceEUR
Deliv.-code
Units pr.pallet
Theoreticalweight kg
PN bar
DN mm
AVK ref. nos.Type
Series 15/42
Flanged gate valveprepared for actuatorFace to face DIN F4Actuator on requestEPDM rubber wedgeStandard flange drilling toISO 7005-2, EN1092-2:1997Epoxy coated according toDIN 30677-2 and GSKguide linesClosing direction: CTCDN 40-300
003
984,00A361310/164015-040-40016984,00A361410/165015-050-40016984,00A301710/166515-065-42016984,00A202110/168015-080-42016
1.070,00A202410/1610015-100-420161.376,00A153410/1612515-125-400161.376,00A104910/1615015-150-420161.684,00A10681020015-200-420061.736,00A10681620015-200-420162.840,00A81131025015-250-420062.920,00A81131625015-250-420163.367,00A61601030015-300-420063.479,00A61601630015-300-42016
Gate valves
Products for sewage according to DIN
DIN
40 2007-07-10 10:47 CET
Gross priceEUR
Deliv.-code
Units pr.pallet
Theoreticalweight kg
PN bar
DN mm
AVK ref. nos.Type
Series 15/72
Flanged gate valveprepared foractuatorFace to face DIN F5Actuator on requestEPDM rubber wedgeStandard flangedrilling to ISO7005-2, EN1092-2:1997Epoxy coatedaccording to DIN30677-2 and GSKguide linesClosing direction: CTCDN 40-500
Note:# Valve having an increased bore (400 mm)## Valve having a reduced bore (400 mm)
003
984,00B361410/164015-040-70016984,00B201410/165015-050-70016984,00B171810/166515-065-72016984,00B142110/168015-080-72016
1.070,00B202410/1610015-100-720161.376,00B84910/1615015-150-720161.684,00B6681020015-200-720061.738,00B6681620015-200-720162.840,00B41131025015-250-720062.924,00B41131625015-250-720163.367,00B21601030015-300-720063.483,00B21601630015-300-720166.998,00B22961035015-350-72006 #)7.238,00B22961635015-350-72016 #)9.020,00B23531040015-400-720069.346,00B23531640015-400-720169.530,00B13721045015-450-72006 ##)9.881,00B13721645015-450-72016 ##)
10.786,00B14301050015-500-72006 ##)11.274,00B14301650015-500-72016 ##)
Gross priceEUR
AVK ref. nos.Type
Series 715/00
Accessories for pneumatic controlled valve
Note:# Coil 24V DC and illuminating seal, To be
ordered together with 715/30## Coil 240 V AC and illuminating seal,To be
ordered together with 715/30
000
0,00715-400-007 #)0,00715-400-008 ##)
Gross priceEUR
Deliv.-code
Units pr.pallet
Theoreticalweight kg
PN bar
DN mm
AVK ref. nos.Type
Series 715/30
Pneumatic controlled valvewith solenoid valve kit and prox.swit.Double-actingFace to face DIN F4Standard flange drilling to ISO7005-2, EN1092-2: 1997Epoxy coated according to DIN30677-2 and GSK guide linesClosing direction: CTCDN 65-300
003
2.875,00A181065715-065-30030093.085,00A221080715-080-30030093.190,00A2710100715-100-30030094.180,00A5210150715-150-30030099.150,00A7510200715-200-3003009
10.190,00A11210250715-250-300300912.370,00A18010300715-300-3003009
Gate valves
Products for sewage according to DIN
DIN
41 2007-07-10 10:47 CET
Gross priceEUR
Deliv.-code
Units pr.pallet
Theoreticalweight kg
PN bar
DN mm
AVK ref. nos.Type
Series 701/33
Kinetic air valveSingle acting Large orificeStandard flange drilling toISO 7005-2, EN 1092-2:1997DN 80-100
010
5.259,00A241680701-080-33115.259,00A2416100701-100-3311
Gross priceEUR
Deliv.-code
Units pr.pallet
Theoreticalweight kg
PN bar
DN mm
AVK ref. nos.Type
Series 701/70
Combination airvalveDouble actingStandard flangedrilling to ISO7005-2, EN1092-2: 1997DN 50-200
Note:# 2" BSP thread
010
2.967,00A171650701-050-70112.967,00A161650701-051-7091 #)3.017,00A181680701-080-70113.190,00A1916100701-100-70113.373,00A2116150701-150-70113.800,00A2416200701-200-7011
Gross priceEUR
Deliv.-code
Units pr.pallet
Theoreticalweight kg
PN bar
DN mm
AVK ref. nos.Type
Series 701/75
Short combinationair valveDouble actingReinforced nylonStandard flangedrilling to ISO7005-2, EN 1092-2:1997DN 50-100
Note:# 2" BSP thread## 3" BSP thread
010
2.267,00A41650701-050-75092.121,00A41650701-051-7509 #)2.421,00A41680701-080-75092.246,00A41680701-081-7509 ##)2.479,00A516100701-100-7509
Gross priceEUR
Deliv.-code
Theoreticalweight kg
PN bar
DN mm
AVK ref. nos.Type
Series 702/10
Knife gate valve withnon-rising stem andhandwheelNBR sealingsStandard flange drilling toISO 7005-2, EN 1092-2:1997UV-resistantpolyester/epoxy coatingDN 50-600
003
624,00B810/1650702-050-1013639,00B910/1665702-065-1013702,00B1110/1680702-080-1013720,00B1410/16100702-100-1013823,00B1610/16125702-125-1013989,00B2510/16150702-150-1013
1.251,00B3510200702-200-10031.577,00B5510250702-250-10032.084,00B6810300702-300-10032.649,00B12010350702-350-10033.481,00B13510400702-400-10035.486,00B13610450702-450-10035.803,00B22510500702-500-10039.829,00B30110600702-600-1003
Air valves
Knife
gate valves
Products for sewage according to DIN
DIN
42 2007-07-10 10:47 CET
Gross priceEUR
Deliv.-code
Theoreticalweight kg
PN bar
DN mm
AVK ref. nos.Type
Series 702/20
Knife gate valve with risingstem and handwheelNBR sealingsStandard flange drilling toISO 7005-2, EN 1092-2: 1997UV-resistant polyester/epoxycoatingDN 50-600
003
543,00B710/1650702-050-2013561,00B810/1665702-065-2013702,00B1110/1680702-080-2013720,00B1310/16100702-100-2013777,00B1510/16125702-125-2013930,00B2510/16150702-150-2013
1.527,00B5510250702-250-20031.927,00B6710300702-300-20033.427,00B13510400702-400-20035.357,00B13610450702-450-20039.596,00B30010600702-600-2003
Gross priceEUR
Deliv.-code
Theoreticalweight kg
PN bar
DN mm
AVK ref. nos.Type
Series 702/30
Knife gate valve withwith quick operationleverNBR sealingsStandard flangedrilling to ISO7005-2, EN 1092-2:1997UV-resistantpolyester/epoxycoatingDN 80-150
003
702,00B1210/1680702-080-3013720,00B1410/16100702-100-3013823,00B1610/16125702-125-3013989,00B2510/16150702-150-3013
Gross priceEUR
Deliv.-code
Theoreticalweight kg
PN bar
DN mm
AVK ref. nos.Type
Series 702/40
Knife gate valve with pneumaticdouble-acting actuatorNBR sealingsStandard flange drilling to ISO7005-2, EN 1092-2: 1997UV-resistant polyester/epoxycoatingDN 50-600
003
915,00B810/1650702-050-4013950,00B910/1665702-065-4013
1.020,00B1310/1680702-080-40131.326,00B1910/16125702-125-40131.599,00B2710/16150702-150-40132.419,00B3410200702-200-40032.997,00B6010250702-250-40033.324,00B7510300702-300-40035.701,00B15010350702-350-40036.679,00B17010400702-400-40039.269,00B28010450702-450-40039.934,00B28610500702-500-4003
15.296,00B36610600702-600-4003
Gross priceEUR
Deliv.-code
Theoreticalweight kg
PN bar
DN mm
AVK ref. nos.Type
Series 702/50
Knife gate valve with ISOflange prepared for el-act. andrising stemNBR sealingsStandard flange drilling to ISO7005-2, EN 1092-2: 1997UV-resistant polyester/epoxycoatingDN 50-600
003
598,00B410/1650702-050-5013617,00B510/1665702-065-5013773,00B810/1680702-080-5013792,00B1010/16100702-100-5013854,00B1210/16125702-125-5013
1.023,00B5210/16150702-150-50131.320,00B4010200702-200-50031.679,00B5210250702-250-50032.120,00B7510300702-300-50032.816,00B2710350702-350-50033.770,00B13210400702-400-50035.893,00B20010450702-450-50036.169,00B28610500702-500-5003
10.555,00B29710600702-600-5003
Knife
gate valvesProducts for sewage according to DIN
DIN
43 2007-07-10 10:47 CET
Gross priceEUR
Deliv.-code
Units pr.pallet
Theoreticalweight kg
PN bar
DN mm
AVK ref. nos.Type
Series 53/35
Ball check valvewith flangesNBR rubberlined ballStandard flangedrilling to ISO7005-2, EN1092-2: 1997Epoxy coatedaccording to DIN30677-2 andGSK guide linesDN 50-400
003
245,00A28810/165053-050-351007273,00A201210/166553-065-351007309,00A201310/168053-080-351007383,00A151810/1610053-100-351007519,00A83510/1612553-125-351007674,00A83710/1615053-150-351007
1.200,00A4681020053-200-3500071.254,00B4681020053-200-3510072.435,00A21121025053-250-3500072.519,00B21121025053-250-3510074.565,00A11631030053-300-3500075.640,00B11631030053-300-3502074.681,00B11631030053-300-3510076.604,00A12891035053-350-3500078.148,00A14161040053-400-350007
Gross priceEUR
Deliv.-code
Units pr.pallet
Theoreticalweight kg
PN bar
DN mm
AVK ref. nos.Type
Series 53/30
Ball check valvewith BSPthreadsNBR rubberlined ballEpoxy coatedaccording to DIN30677-2 andGSK guide linesDN 32-50
005
107,00A1602103253-032-309007120,00A1002104053-040-309007155,00A803105053-050-309007
Gross priceEUR
Deliv.-code
Units pr.pallet
Theoreticalweight kg
PN bar
DN mm
AVK ref. nos.Type
Series 53/40
Ball check valvein stainless steelAISI 316 withBSP threadNBR rubberlined ballDN 32-80
005
154,00A1002103253-032-409090173,00A1002104053-040-409090302,00A803105053-050-409090374,00A207106553-065-409090513,00A207108053-080-409090
Gross priceEUR
Deliv.-code
Units pr.pallet
Theoreticalweight kg
PN bar
DN mm
AVK ref. nos.Type
Series 41/60
Swing checkvalve with freeshaft endEPDM rubberwedgeStandard flangedrilling to ISO7005-2,EN1092-2: 1997Epoxy coatedaccording to DIN30677-2 andGSK guide linesDN 50-300
003
662,00A181310/165041-050-60018742,00A151510/166541-065-60018
1.000,00A92410/1610041-100-600181.261,00A83810/1612541-125-600181.617,00A84610/1615041-150-600182.571,00A5781020041-200-600082.625,00B5781620041-200-600185.069,00A11831025041-250-600085.153,00B11831625041-250-600185.992,00A12311030041-300-600086.108,00B12311630041-300-60018
Ball
check valvesC
heck valves
Products for sewage according to DIN
DIN
44 2007-07-10 10:47 CET
Gross priceEUR
Deliv.-code
Units pr.pallet
Theoreticalweight kg
PN bar
DN mm
AVK ref. nos.Type
Series 41/61
Swing checkvalve withclosed bushingsEPDM rubberwedgeStandard flangedrilling to ISO7005-2,EN1092-2: 1997Epoxy coatedaccording to DIN30677-2 andGSK guide linesDN 50-300
003
514,00A181310/165041-050-61018584,00A151310/166541-065-61018662,00A151310/168041-080-61018814,00A92610/1610041-100-61018
1.046,00A84010/1612541-125-610181.323,00A85110/1615041-150-610182.062,00A5831020041-200-610082.116,00B5831620041-200-610184.180,00A11831025041-250-610084.264,00B11831625041-250-610185.348,00A12311030041-300-610085.464,00B12311630041-300-61018
Gross priceEUR
Deliv.-code
DN/DNmm
DN mm
AVK ref. nos.Type
Series 41/23
Swing checkvalve lever andweight kitEpoxy coatedaccording to DIN30677-2 andGSK guide linesDN 100-300
001
111,00A100-10010041-100-23000155,00A125-15015041-150-23000155,00A200-20020041-200-23000448,00A250-30030041-300-23000
Gross priceEUR
Deliv.-code
Theoreticalweight kg
DN mm
AVK ref. nos.Type
Series 41/32
Swing checkvalve spring kitEpoxy coatedaccording to DIN30677-2 andGSK guide linesDN 50-300
001
481,00A15041-050-32000483,00A16541-065-32000111,00A38041-080-230000000463,00A18041-080-32000478,00A110041-100-32000523,00A112541-125-32000523,00A115041-150-32000527,00A220041-200-32000
1.596,00A330041-300-32000
Check valves
Products for sewage according to DIN
DIN
45 2007-07-10 10:47 CET
2007-01-01
Valve certificates for sewage Price list 2007
Certific
ate
sD
IN
Series 95
Factory certificate 2.2 according to EN 10204with attachment
Series 95
Factory certificate 2.2 according to EN 10204 without attachment
Series 95
Factory certificate 3.1 according to EN 10204 with attachment
Series 95
Factory certificate 2.2 according to EN 10204without attachment
Series 95
Certificate of conformity
Series 95
Factory certificate 3.1 according to EN 10204 without attachment
Nett. price per shipment9512210 25
Nett. price per shipment9512200 5
Nett. price per valve9513110 5
Nett. price per valve 9513100 3
Nett. price per shipment9532200 25
Nett. price per shipment9540000 20
NOTE: PRICES FOR CERTIFICATES ARE NETT. PRICES
Gross priceEUR
Deliv.-code
Units pr.pallet
Theoreticalweight kg
PN bar
DN mm
AVK ref. nos.Type
Series 02/70
Flanged gate valveFace to face DIN F5Ductile ironNBR rubber wedgeStandard flangedrilling to ISO7005-2, EN 1092-2:1997Epoxy coatedaccording to DIN30677-2 and GSKguide linesClosing direction:CTCDN 40-500
003
354,00B241110/164002-040-7001237364,00B201210/165002-050-7001237454,00B171510/166502-065-7001237454,00B141910/168002-080-7001237510,00B122510/1610002-100-7001237782,00B93310/1612502-125-7001237782,00B84910/1615002-150-7001237
1.260,00B6701020002-200-70002371.322,00B6701620002-200-70012372.036,00B41101025002-250-70002372.136,00B41101625002-250-70012372.134,00B21601030002-300-70002372.872,00B21601630002-300-70012375.658,00B23201635002-350-70012377.300,00B23301040002-400-70002377.664,00B23301640002-400-7001237
10.748,00B14171050002-500-700023711.286,00B14171650002-500-7001237
Gross priceEUR
Deliv.-code
Units pr.pallet
Theoreticalweight kg
PN bar
DN mm
AVK ref. nos.Type
Series 02/74
Flanged gate valveFace to face DIN F5Ductile ironPG3Standard flangedrilling to ISO7005-2, EN1092-2:1997Epoxy coatedaccording to DIN30677-2 and GSKguide linesClosing direction:CTCDN 40-500
003
404,00A241110/164002-040-7401237414,00A201210/165002-050-7401237502,00B171510/166502-065-7401237502,00A141910/168002-080-7401237560,00A122510/1610002-100-7401237834,00A93310/1612502-125-7401237834,00A84910/1615002-150-7401237
1.310,00A6701020002-200-74002371.376,00A6701620002-200-74012372.100,00A41101025002-250-74002372.206,00A41101625002-250-74012372.802,00A21601030002-300-74002372.942,00A21601630002-300-74012375.454,00B23201035002-350-74003377.400,00A23301040002-400-74002377.770,00B23301640002-400-7401237
10.887,00B14171050002-500-740033711.432,00B14171650002-500-7401337
Gross priceEUR
Deliv.-code
Units pr.pallet
Theoreticalweight kg
PN bar
DN mm
AVK ref. nos.Type
Series 06/70
Flanged gate valveFace to face DIN F4Ductile ironNBR rubber wedgeStandard flange drilling toISO 7005-2, EN1092-2:1997Epoxy coated according toDIN 30677-2 and GSKguide linesClosing direction: CTCDN 40-300
003
338,00A361210/164006-040-7001237352,00A361210/165006-050-7001237438,00A301510/166506-065-7001237438,00A201910/168006-080-7001237494,00A202510/1610006-100-7001237756,00A153310/1612506-125-7001237756,00A104910/1615006-150-7001237
1.216,00A10701020006-200-70002371.278,00A10701620006-200-70012371.966,00A81101025006-250-70002372.064,00A81101625006-250-70012372.644,00A61601030006-300-70002372.776,00A61601630006-300-70012375.658,00A2031630006-350-7001237
Gate valves
Products for gas according to DIN
DIN
46 2007-07-10 10:47 CET
Gross priceEUR
Deliv.-code
Units pr.pallet
Theoreticalweight kg
PN bar
DN mm
AVK ref. nos.Type
Series 06/74
Flanged gate valveFace to face DIN F4Ductile ironPG3NBR rubber wedgeStandard flange drilling toISO 7005-2, EN1092-2:1997Epoxy coated according toDIN 30677-2 and GSKguide linesClosing direction: CTCDN 40-300
003
B301510/164006-040-7401237B361510/165006-050-7401237
400,00B361210/165006-050-7401337488,00B301510/166506-065-7401237488,00B201910/168006-080-7401237540,00B202510/1610006-100-7401237806,00B153310/1612506-125-7401337806,00B104910/1615006-150-7401237
1.266,00B10701020006-200-74002371.330,00B10701620006-200-74012372.025,00B81101025006-250-74002372.132,00B81101625006-250-74012372.708,00B61601030006-300-74002372.842,00B61601630006-300-74012375.755,00B2031030006-350-7400237
Gross priceEUR
Deliv.-code
Units pr.pallet
Theoreticalweight kg
PN bar
Dmm
DN mm
AVK ref. nos.Type
Series 36/90
Gate valve withPE-pipesDuctile ironNBR rubberwedgeEpoxy coatedaccording to DIN30677-2 andGSK guide linesClosing direction: CTCDN 80-200
Note:# PE 80 PN 4 SDR 11 pipes
160
670,00B7204908036-090-90603037 #)764,00A527411010036-110-90603037 #)
1.340,00A352416015036-160-90603037 #)1.476,00B358418015036-180-90603037 #)2.520,00A491422520036-225-90603037 #)
Gross priceEUR
Deliv.-code
Units pr.pallet
Theoreticalweight kg
PN bar
Dmm
DN mm
AVK ref. nos.Type
Series 36/90
Gate valve withPE-pipesDuctile ironNBR rubberwedgeEpoxy coatedaccording to DIN30677-2 andGSK guide linesClosing direction: CTCDN 80-300
Note:# PE 100 PN 10 SDR 11 pipe
170
670,00A72010908036-090-90703037 #)764,00B5271011010036-110-90703037 #)976,00A3391012512536-125-90703037 #)
1.340,00B3521016015036-160-90703037 #)1.476,00B3581018015036-180-90703037 #)2.388,00A881020020036-200-90703037 #)2.520,00B4911022520036-225-90703037 #)3.581,00A118425025036-250-907030373.873,00B11261028025036-280-90703037 #)6.260,00B1401031530036-315-90703037 #)
Gate valves
Products for gas according to DIN
DIN
47 2007-07-10 10:47 CET
Gross priceEUR
Deliv.-code
Units pr.pallet
Theoreticalweight kg
PN bar
Dmm
DN mm
AVK ref. nos.Type
Series 36/90
Gate valve withPE-pipesDuctile ironNBR rubberwedgeEpoxy coatedaccording to DIN30677-2 andGSK guide linesClosing direction: CTCDN 80-300
Note:# PE 100 PN 10/4 SDR 11 pipe
171
670,00B7204908036-090-90713037 #)764,00B527411010036-110-90713037 #)976,00B339412512536-125-90713037 #)
1.476,00B358418015036-180-90713037 #)2.508,00A488420020036-200-90713037 #)2.520,00B491422520036-225-90713037 #)3.873,00B3126428025036-280-90713037 #)6.260,00B140431530036-315-90713037 #)
Gross priceEUR
Deliv.-code
Units pr.pallet
Theoreticalweight kg
PN bar
DN mm
AVK ref. nos.Type
Series 46/64
Gate valve withspigot endsface to face S8PG3NBR rubber wedgeWith outside PURcoatingClosing direction:CTCDN 50-300
Note:# Design standard
according to EN13774
010
1.071,00A108165046-050-6401280 #)1.420,00A1016168046-080-6401280 #)1.501,00A8221610046-100-6401280 #)2.346,00A5381615046-150-6401280 #)3.471,00A4611620046-200-6401280 #)5.070,00A3861625046-250-6401280 #)6.707,00A21261630046-300-6401280 #)
Gross priceEUR
Deliv.-code
Units pr.pallet
Theoreticalweight kg
PN bar
DN mm
AVK ref. nos.Type
Series 46/70
Gate valve withspigot endsPG2NBR rubberwedgeEpoxy coatedaccording to DIN30677-2 andGSK guide linesClosingdirection: CTCDN 50-300
Note:# Design standard according to EN 13774
005
788,00A13165046-050-7001237 #)1.050,00A1015168046-080-7001237 #)1.134,00A8261610046-100-7001237 #)1.788,00A6401615046-150-7001237 #)2.638,00A4721620046-200-7001237 #)2.696,00B4721620046-200-7401237 #)4.040,00A3931625046-250-7001237 #)5.554,00A21301630046-300-7001237 #)
Gate valves
Products for gas according to DIN
DIN
48 2007-07-10 10:47 CET
Gross priceEUR
Deliv.-code
Units pr.pallet
Theoreticalweight kg
PN bar
DN mm
AVK ref. nos.Type
Series 46/70
Gate valve withspigot endsPG2NBR rubber wedgeWith outside PURcoatingClosing direction:CTCDN 50-300
Note:# Design standard
according to EN13774
010
1.013,00B1013165046-050-7001280 #)1.360,00A1016168046-080-7001280 #)1.479,00A8221610046-100-7001280 #)2.288,00A5381615046-150-7001280 #)3.413,00A4611620046-200-7001280 #)4.990,00A3861625046-250-7001280 #)6.629,00A21261630046-300-7001280 #)
Gross priceEUR
Deliv.-code
Units pr.pallet
Theoreticalweight kg
PN bar
DN mm
AVK ref. nos.Type
Series 46/74
Gate valve withspigot endsPG3NBR rubberwedgeEpoxy coatedaccording to DIN30677-2 andGSK guide linesClosingdirection: CTCDN 50-300
Note:# Design standard according to EN 13774
005
846,00B13165046-050-7401237 #)1.110,00B1015168046-080-7401237 #)1.190,00B8261610046-100-7401237 #)1.846,00B5401615046-150-7401237 #)4.120,00B3931625046-250-7401237 #)5.632,00B21301630046-300-7401237 #)
Gross priceEUR
Deliv.-code
Units pr.pallet
Theoreticalweight kg
PN bar
DN mm
AVK ref. nos.Type
Series 46/74
Gate valve withspigot endsPG3NBR rubber wedgeWith outside PURcoatingClosing direction:CTCDN 50-300
Note:# Design standard
according to EN13774
010
1.071,00B1013165046-050-7401280 #)1.420,00B1016168046-080-7401280 #)1.501,00B8221610046-100-7401280 #)2.346,00B5381615046-150-7401280 #)3.471,00B4611620046-200-7401280 #)5.070,00B3861625046-250-7401280 #)6.707,00B21261630046-300-7401280 #)
Gate valves
Products for gas according to DIN
DIN
49 2007-07-10 10:47 CET
Gross priceEUR
Deliv.-code
Units pr.pallet
Theoreticalweight kg
PN bar
DN mm
AVK ref. nos.Type
Series 03/25
Service conn. valveInternal threadDuctile ironPN 4 PG 2NBR rubber wedge withDVGW KTW approvalEpoxy coated accordingto DIN 30677-2 andGSK guide linesClosing direction: CTCDN 25-50
004
185,00A96342503-032-2500237240,00A55544003-050-2500237324,00A45645003-063-2500237
Serviceconn. valves
Products for gas according to DIN
DIN
50 2007-07-10 10:47 CET
2007-01-01
Certificates
Valve certificates for gas Price list 2007
Type AVK ref. nos. Nett. price Euro
Series 95
Factory certificate 3.1 according to EN 10204 with attachment
Series 95
Factory certificate 3.1 according to EN 10204 without attachment
Series 95
Factory certificate 2.2 according to EN 10204 without attachment
Series 95
Factory certificate 2.2 according to EN 10204 without attachment
Series 95
Certificate of conformity
Nett. price per valve9523110 5
Nett. price per valve9523100 3
Nett. price per shipment9522200 25
Nett. price per shipment9532200 25
Nett. price per shipment9540000 20
NOTE: PRICES FOR CERTIFICATES ARE NETT. PRICES
DIN
Gross priceEUR
Deliv.-code
Units pr.pallet
Theoreticalweight kg
PN bar
DN mm
AVK ref. nos.Type
Series 06/35
Flanged gate valve with PinIndicatorFace to face DIN F4Ductile ironEPDM rubber wedgeStandard flange drilling toISO 7005-2, EN1092-2: 1997Epoxy coated according toDIN 30677-2 and GSK guidelinesClosing direction: CTCDN 200-300
Note:# Not approved to VdS## Approved acc. to NF
013
1.347,00A3711020006-200-35006202.112,00A21131025006-250-3500620 #)2.951,00A11601030006-300-3500420 #)6.626,00B201630006-350-3500620 ##)6.866,00B201630006-350-3501620 ##)
Gross priceEUR
Deliv.-code
Units pr.pallet
Theoreticalweight kg
PN bar
DN mm
AVK ref. nos.Type
Series 06/35
Flanged gate valve with PinIndicatorFace to face DIN F4Ductile ironEPDM rubber wedgeStandard flange drilling toISO 7005-2, EN1092-2: 1997Epoxy coated according toDIN 30677-2 and GSK guidelinesClosing direction: CTCDN 50-300
Note:# Not approved to VdS
014
283,00A241310/165006-050-3501420380,00A181610/166506-065-3501420380,00A202010/168006-080-3501420452,00A202710/1610006-100-3501420764,00A63610/1612506-125-3501420764,00A55110/1615006-150-3501420
1.399,00A6711620006-200-35016202.192,00A21131625006-250-3501620 #)3.063,00A11601630006-300-3501620 #)
Gross priceEUR
Deliv.-code
Units pr.pallet
Theoreticalweight kg
PN bar
DN mm
AVK ref. nos.Type
Series 25/46
Flanged gate vale withrising stem OS&YAWWA C509EPDM rubber wedgeANSI B16.1 CLASS 125 -ANSI B16.5 CLASS 150AWWA C550Closing direction: CTCDN 65-300
Note:# Design standard
according to AWWA C509(OS&Y)
010
524,00A2010/166525-065-4601600020 #)538,00A2510/168025-080-4601600020 #)647,00A3910/1610025-100-4601600020 #)941,00A6310/1615025-150-4601600020 #)
1.543,00A971620025-200-4601600020 #)2.523,00A1571625025-250-4601600020 #)4.327,00A2381630025-300-4601600020 #)
Gate valves
Products for firefight according to DIN
DIN
51 2007-07-10 10:47 CET
Gross priceEUR
Deliv.-code
Units pr.pallet
Theoreticalweight kg
PN bar
DN mm
AVK ref. nos.Type
Series 45/5
Resilient SeatedDuctile Iron GateValve250 PSIFLFLEPDM rubber wedgeANSI B16.1 CLASS125 - ANSI B16.5CLASS 150AWWA C550Closing direction:CTCDN 100-300
Note:# Design standard according to AWWA C509
(NRS)
001
677,008910/1610045-100-5702634029 #)1.226,0013310/1615045-150-5702634029 #)1.637,001991620045-200-5702634029 #)2.348,00B2981625045-250-5702634029 #)4.732,00B3831630045-300-5702634029 #)
Gross priceEUR
Deliv.-code
Units pr.pallet
Theoreticalweight kg
PN bar
Dmm
DN mm
AVK ref. nos.Type
Series 06/37
Grooved end gatevalve with Pin Indicatoraccording to AWWA C606Ductile ironEPDM rubber wedgeStandard flange drillingto ISO 7005-2,EN1092-2: 1997Epoxy coatedaccording to DIN30677-2 and GSKguide linesClosing direction: CTOor CTCDN 50-300
Note:# Design standard according to EN 1074
003
A010/16605006-050-3709620 #)A1310/16898006-080-3709620 #)A1810/1611410006-100-3709620 #)A3910/1616815006-150-3709620 #)A551621920006-200-3709620 #)A831627325006-250-3709620 #)A1151632430006-300-3709620 #)
Gate valves
Products for firefight according to DIN
DIN
52 2007-07-10 10:47 CET
Designed according to EN 593EN
593
Basic DIN design standard 2007-07-10 10:47 CET
Water
756/1, Double eccentric butterflyvalve, Series 14 (F4), Ductileiron, DN 200-600
53
756/2, Double eccentric butterflyvalve, Series 14 (F4), Ductileiron, DN 700-1200
57
76/70, Butterfly valve,concentric, Wafer typeEuronomic
59
76/71, Butterfly valve,concentric, Lug type Euronomic
61
75/30, Butterfly valve,concentric, Semi lug type, GG
61
75/31, Butterfly valve,concentric, Semi lug type, GGG
62
75/40, Butterfly valve,concentric, Double flanged type,ISO 13, GG
62
75/41, Butterfly valve,concentric, Double flanged type,ISO 13, GGG
63
SEWAGE
76/70, Butterfly valve,concentric, Wafer typeEuronomic
64
76/71, Butterfly valve,concentric, Lug type Euronomic
66
75/30, Butterfly valve,concentric, Semi lug type, GG
66
75/40, Butterfly valve,concentric, Double flanged type,ISO 13, GG
67
GAS
75/40, Butterfly valve,concentric, Double flanged type,ISO 13, GG
69
75/41, Butterfly valve,concentric, Double flanged type,ISO 13, GGG
69
FIRE PROTECTION
75/31, Butterfly valve,concentric, Semi lug type, GGG
70
75/41, Butterfly valve,concentric, Double flanged type,ISO 13, GGG
70
Gross priceEUR
Deliv.-code
Units pr.pallet
Theoreticalweight kg
PN bar
DN mm
AVK ref. nos.Type
Series 756/1
Double eccentricbutterfly valveSeries 14 (F4)Ductile ironDN 200-600EPDM sealingsStandard flangedrilling to ISO7005-2,EN1092-2: 1997Epoxy coatedaccording to DIN30677-2 andGSK guide linesDN 200-600
Note:# IP 67 ISO flange gearbox
05
3.148,00B44010200756-0200-106002 #)3.465,00B45810250756-0250-106002 #)4.468,00B8310300756-0300-106002 #)5.190,00B11010350756-0350-106002 #)5.613,00B14210400756-0400-106002 #)7.168,00B18410450756-0450-106002 #)8.223,00B24010500756-0500-106002 #)
10.475,00B41010600756-0600-106002 #)
Gross priceEUR
Deliv.-code
Units pr.pallet
Theoreticalweight kg
PN bar
DN mm
AVK ref. nos.Type
Series 756/1
Double eccentricbutterfly valveSeries 14 (F4)Ductile ironDN 200-600EPDM sealingsStandard flangedrilling to ISO7005-2, EN1092-2: 1997Epoxy coatedaccording to DIN30677-2 andGSK guide linesDN 200-600
Note:# IP 67 ISO flange gearbox
10
3.248,00B4016200756-0200-116002 #)3.795,00B5816250756-0250-116002 #)4.878,00B8316300756-0300-116002 #)6.088,00B11016350756-0350-116002 #)6.610,00B14216400756-0400-116002 #)8.692,00B18416450756-0450-116002 #)
10.316,00B24016500756-0500-116002 #)13.682,00B41016600756-0600-116002 #)
Gross priceEUR
Deliv.-code
Units pr.pallet
Theoreticalweight kg
PN bar
DN mm
AVK ref. nos.Type
Series 756/1
Double eccentricbutterfly valveSeries 14 (F4)Ductile ironDN 200-600EPDM sealingsStandard flangedrilling to ISO7005-2,EN1092-2: 1997Epoxy coatedaccording to DIN30677-2 andGSK guide linesClosing direction: CTCDN 200-600
Note:# IP 68 gearbox for buried service
05
2.818,00B4010200756-0200-106006 #)3.135,00B5810250756-0250-106006 #)4.138,00B8310300756-0300-106006 #)4.860,00B11010350756-0350-106006 #)5.283,00B14210400756-0400-106006 #)6.838,00B18410450756-0450-106006 #)7.893,00B24010500756-0500-106006 #)
10.145,00B41010600756-0600-106006 #)
Butterflyvalves
Products for water according to EN593
EN 593
53 2007-07-10 10:47 CET
Gross priceEUR
Deliv.-code
Units pr.pallet
Theoreticalweight kg
PN bar
DN mm
AVK ref. nos.Type
Series 756/1
Double eccentricbutterfly valveSeries 14 (F4)Ductile ironDN 200-600EPDM sealingsStandard flangedrilling to ISO7005-2, EN1092-2: 1997Epoxy coatedaccording to DIN30677-2 andGSK guide linesClosing direction: CTCDN 200-600
Note:# IP 68 gearbox for buried service
10
2.918,00B4016200756-0200-116006 #)3.465,00B5816250756-0250-116006 #)4.548,00B8316300756-0300-116006 #)5.758,00B11016350756-0350-116006 #)6.280,00B14216400756-0400-116006 #)8.692,00B18416450756-0450-116006 #)9.986,00B24016500756-0500-116006 #)
13.352,00B141016600756-0600-116006 #)
Gross priceEUR
Deliv.-code
Units pr.pallet
Theoreticalweight kg
PN bar
DN mm
AVK ref. nos.Type
Series 756/1
Double eccentricbutterfly valveSeries 14 (F4)Ductile ironDN 200-600EPDM sealingsStandard flangedrilling to ISO7005-2,EN1092-2: 1997Epoxy coatedaccording to DIN30677-2 andGSK guide linesClosing direction: CTCDN 200-600
Note:# IP 65 gearbox
05
2.548,00A4010200756-0200-106 #)2.865,00A4010250756-0250-106 #)3.868,00A5810300756-0300-106 #)4.590,00A11010350756-0350-106 #)5.013,00A14210400756-0400-106 #)6.568,00A14210450756-0450-106 #)7.623,00A24010500756-0500-106 #)9.875,00A41010600756-0600-106 #)
Gross priceEUR
Deliv.-code
Units pr.pallet
Theoreticalweight kg
PN bar
DN mm
AVK ref. nos.Type
Series 756/1
Double eccentricbutterfly valveSeries 14 (F4)Ductile ironDN 200-600EPDM sealingsStandard flangedrilling to ISO7005-2, EN1092-2: 1997Epoxy coatedaccording to DIN30677-2 andGSK guide linesClosing direction: CTCDN 200-600
Note:# IP 65 gearbox
10
2.648,00A4016200756-0200-116 #)3.195,00A5816250756-0250-116 #)4.278,00A8316300756-0300-116 #)5.488,00A11016350756-0350-116 #)6.010,00A14216400756-0400-116 #)8.422,00A18416450756-0450-116 #)9.716,00A24016500756-0500-116 #)
13.082,00A41016600756-0600-116 #)
Butterflyvalves
Products for water according to EN593
EN 593
54 2007-07-10 10:47 CET
Gross priceEUR
Deliv.-code
Units pr.pallet
Theoreticalweight kg
PN bar
DN mm
AVK ref. nos.Type
Series 756/1
Double eccentricbutterfly valveSeries 14 (F4)Ductile ironDN 200-600EPDM sealingsStandard flangedrilling to ISO7005-2,EN1092-2: 1997Epoxy coatedaccording to DIN30677-2 outside,enamelled toDEV insideClosing direction: CTCDN 200-600
Note:# IP 65 gearbox
05
2.948,00B4010200756-0200-1061 #)3.465,00B5810250756-0250-1061 #)4.663,00B8310300756-0300-1061 #)6.090,00B11010350756-0350-1061 #)6.513,00B14210400756-0400-1061 #)8.068,00B18410450756-0450-1061 #)9.123,00B24010500756-0500-1061 #)
11.375,00B41010600756-0600-1061 #)
Gross priceEUR
Deliv.-code
Units pr.pallet
Theoreticalweight kg
PN bar
DN mm
AVK ref. nos.Type
Series 756/1
Double eccentricbutterfly valveSeries 14 (F4)Ductile ironDN 200-600EPDM sealingsStandard flangedrilling to ISO7005-2, EN1092-2: 1997Epoxy coatedaccording to DIN30677-2 outside,enamelled toDEV insideClosing direction: CTCDN 200-600
Note:# IP 65 gearbox
10
3.048,00B4016200756-0200-1161 #)3.795,00B5816250756-0250-1161 #)5.103,00B8316300756-0300-1161 #)6.313,00B11016350756-0350-1161 #)7.513,00B14216400756-0400-1161 #)9.922,00B18416450756-0450-1161 #)
11.216,00B24016500756-0500-1161 #)14.582,00B41016600756-0600-1161 #)
Gross priceEUR
Deliv.-code
Units pr.pallet
Theoreticalweight kg
PN bar
DN mm
AVK ref. nos.Type
Series 756/1
Double eccentricbutterfly valveSeries 14 (F4)Ductile ironDN 200-600EPDM sealingsStandard flangedrilling to ISO7005-2,EN1092-2: 1997Epoxy coatedaccording to DIN30677-2 andGSK approvedClosing direction: CTCDN 200-600
Note:# IP 65 gearbox, Stainless steel AISI 316 seat
05
3.276,00B44010200756-0200-10700005 #)3.850,00B45810250756-0250-10700005 #)5.181,00B48310300756-0300-10700005 #)6.767,00B311010350756-0350-10700005 #)7.237,00B214210400756-0400-10700005 #)8.964,00B218410450756-0450-10700005 #)
10.137,00B124010500756-0500-10700005 #)12.639,00B141010600756-0600-10700005 #)
Butterflyvalves
Products for water according to EN593
EN 593
55 2007-07-10 10:47 CET
Gross priceEUR
Deliv.-code
Units pr.pallet
Theoreticalweight kg
PN bar
DN mm
AVK ref. nos.Type
Series 756/1
Double eccentricbutterfly valveSeries 14 (F4)Ductile ironDN 200-600EPDM sealingsStandard flangedrilling to ISO7005-2, EN1092-2: 1997Epoxy coatedaccording to DIN30677-2 andGSK approvedClosing direction: CTCDN 200-600
Note:# IP 65 gearbox, Stainless steel AISI 316 seat
10
3.387,00B44016200756-0200-11700005 #)4.217,00B45816250756-0250-11700005 #)5.670,00B48316300756-0300-11700005 #)7.014,00B311016350756-0350-11700005 #)8.348,00B214216400756-0400-11700005 #)
11.024,00B218416450756-0450-11700005 #)12.462,00B124016500756-0500-11700005 #)16.202,00B141016600756-0600-11700005 #)
Gross priceEUR
Deliv.-code
Units pr.pallet
Theoreticalweight kg
PN bar
DN mm
AVK ref. nos.Type
Series 756/1
Double eccentricbutterfly valveSeries 14 (F4)Ductile ironDN 200-600EPDM sealingsStandard flangedrilling to ISO7005-2,EN1092-2: 1997Epoxy coatedaccording to DIN30677-2 andGSK approvedDN 200-600
Note:# IP 67 ISO flange gearbox, Stainless steel
AISI 316 seat
05
4.044,00B44010200756-0200-10700205 #)4.639,00B45810250756-0250-10700205 #)6.025,00B48310300756-0300-10700205 #)7.689,00B311010350756-0350-10700205 #)8.131,00B214210400756-0400-10700205 #)9.744,00B218410450756-0450-10700205 #)
10.900,00B124010500756-0500-10700205 #)13.446,00B141010600756-0600-10700205 #)
Gross priceEUR
Deliv.-code
Units pr.pallet
Theoreticalweight kg
PN bar
DN mm
AVK ref. nos.Type
Series 756/1
Double eccentricbutterfly valveSeries 14 (F4)Ductile ironDN 200-600EPDM sealingsStandard flangedrilling to ISO7005-2, EN1092-2: 1997Epoxy coatedaccording to DIN30677-2 andGSK approvedDN 200-600
Note:# IP 67 ISO flange gearbox, Stainless steel
AISI 316 seat
10
4.181,00B44016200756-0200-11700205 #)5.080,00B45816250756-0250-11700205 #)6.593,00B48316300756-0300-11700205 #)7.971,00B311016350756-0350-11700205 #)9.380,00B214216400756-0400-11700205 #)
11.983,00B218416450756-0450-11700205 #)13.400,00B124016500756-0500-11700205 #)17.236,00B141016600756-0600-11700205 #)
Butterflyvalves
Products for water according to EN593
EN 593
56 2007-07-10 10:47 CET
Gross priceEUR
Deliv.-code
Units pr.pallet
Theoreticalweight kg
PN bar
DN mm
AVK ref. nos.Type
Series 756/1
Double eccentricbutterfly valveSeries 14 (F4)Ductile ironDN 200-600EPDM sealingsStandard flangedrilling to ISO7005-2,EN1092-2: 1997Epoxy coatedaccording to DIN30677-2 andGSK approvedClosing direction: CTCDN 200-600
Note:# IP 68 gearbox, Stainless steel seat
05
3.640,00B44010200756-0200-10700605 #)4.278,00B45810250756-0250-10700605 #)5.571,00B48310300756-0300-10700605 #)7.276,00B311010350756-0350-10700605 #)7.618,00B214210400756-0400-10700605 #)9.436,00B218410450756-0450-10700605 #)
10.559,00B124010500756-0500-10700605 #)13.030,00B141010600756-0600-10700605 #)
Gross priceEUR
Deliv.-code
Units pr.pallet
Theoreticalweight kg
PN bar
DN mm
AVK ref. nos.Type
Series 756/1
Double eccentricbutterfly valveSeries 14 (F4)Ductile ironDN 200-600EPDM sealingsStandard flangedrilling to ISO7005-2, EN1092-2: 1997Epoxy coatedaccording to DIN30677-2 andGSK approvedClosing direction: CTCDN 200-600
Note:# IP 68 gearbox, Stainless steel seat
10
3.763,00B44016200756-0200-11700605 #)4.685,00B45816250756-0250-11700605 #)6.097,00B48316300756-0300-11700605 #)7.542,00B311016350756-0350-11700605 #)8.787,00B214216400756-0400-11700605 #)
11.605,00B218416450756-0450-11700605 #)12.981,00B124016500756-0500-11700605 #)13.030,00B141016600756-0600-11700605 #)
Gross priceEUR
Deliv.-code
Units pr.pallet
Theoreticalweight kg
PN bar
DN mm
AVK ref. nos.Type
Series 756/2
Double eccentricbutterfly valveSeries 14 (F4)Ductile ironDN 700-1200EPDM sealingsStandard flangedrilling to ISO7005-2,EN1092-2: 1997Epoxy coated according to DIN 30677-2 andGSK guide linesClosing direction: CTCDN 700-1200
Note:# Prices on request, IP 68 gearbox
07
B81610700756-0700-104006 #)B122810800756-0800-104006 #)B129210900756-0900-104006 #)B1704101000756-1000-104006 #)B2599101200756-1200-104006 #)
Butterflyvalves
Products for water according to EN593
EN 593
57 2007-07-10 10:47 CET
Gross priceEUR
Deliv.-code
Units pr.pallet
Theoreticalweight kg
PN bar
DN mm
AVK ref. nos.Type
Series 756/2
Double eccentricbutterfly valveSeries 14 (F4)Ductile ironDN 700-1200EPDM sealingsStandard flangedrilling to ISO7005-2, EN1092-2: 1997Epoxy coated according to DIN 30677-2 andGSK guide linesClosing direction: CTCDN 700-1200
Note:# Prices on request, IP 68 gearbox
12
B81616700756-0700-114006 #)B122816800756-0800-114006 #)B129216900756-0900-114006 #)B2599161200756-1200-114006 #)
Gross priceEUR
Deliv.-code
Units pr.pallet
Theoreticalweight kg
PN bar
DN mm
AVK ref. nos.Type
Series 756/2
Double eccentricbutterfly valveSeries 14 (F4)Ductile ironDN 700-1200EPDM sealingsStandard flangedrilling to ISO7005-2,EN1092-2: 1997Epoxy coatedaccording to DIN30677-2 andGSK guide linesDN 700-1200
Note:# Prices on request, Stainless steel seat
05
0,00B153510700756-0700-10400815 #)0,00B168710800756-0800-10400815 #)0,00B197110900756-0900-10400815 #)0,00B11262101000756-1000-10400815 #)0,00B11953101200756-1200-10400815 #)
Gross priceEUR
Deliv.-code
Units pr.pallet
Theoreticalweight kg
PN bar
DN mm
AVK ref. nos.Type
Series 756/2
Double eccentricbutterfly valveSeries 14 (F4)Ductile ironDN 700-1200EPDM sealingsStandard flangedrilling to ISO7005-2, EN1092-2: 1997Epoxy coatedaccording to DIN30677-2 andGSK guide linesDN 700-1200
Note:# Prices on request, Stainless steel seat
10
0,00B153516700756-0700-11400815 #)0,00B168716800756-0800-11400815 #)0,00B197116900756-0900-11400815 #)0,00B11262161000756-1000-11400815 #)0,00B11953161200756-1200-11400815 #)
Butterflyvalves
Products for water according to EN593
EN 593
58 2007-07-10 10:47 CET
Gross priceEUR
Deliv.-code
Units pr.pallet
Theoreticalweight kg
PN bar
DN mm
AVK ref. nos.Type
Series 76/70
Butterfly valveconcentricWafer type EuronomicEPDM rubber lined ballStandard flange drilling toISO 7005-2, EN 1092-2:1997Blue Polyester RAL 501780 myClosing direction: CTCDN 50-300
Note:# Body in GG 25, nickel
plated cast steel disc
01
117,00B3165076-0050-708170026901 #)123,00B3166576-0065-708170026901 #)137,00B4168076-0080-708170026901 #)171,00B51610076-0100-708170026901 #)226,00B61612576-0125-708170026901 #)264,00B91615076-0150-708170026901 #)381,00B131620076-0200-708170026901 #)765,00B251025076-0250-708170026901 #)929,00B341030076-0300-708170026901 #)
Gross priceEUR
Deliv.-code
Units pr.pallet
Theoreticalweight kg
PN bar
DN mm
AVK ref. nos.Type
Series 76/70
Butterfly valveconcentricWafer type EuronomicNBR rubber lined bodyStandard flange drilling toISO 7005-2, EN 1092-2:1997Blue Polyester RAL 501780 myClosing direction: CTCDN 50-300
Note:# Body in GG 25, nickel
plated cast steel disc
02
117,00B3165076-0050-708070026901 #)123,00B3166576-0065-708070026901 #)137,00B4168076-0080-708070026901 #)171,00B51610076-0100-708070026901 #)226,00B61612576-0125-708070026901 #)264,00B91615076-0150-708070026901 #)381,00B131620076-0200-708070026901 #)765,00B251025076-0250-708070026901 #)929,00B341030076-0300-708070026901 #)
Gross priceEUR
Deliv.-code
Units pr.pallet
Theoreticalweight kg
PN bar
DN mm
AVK ref. nos.Type
Series 76/70
Butterfly valveconcentricWafer type EuronomicEPDM rubber lined bodyStandard flange drilling toISO 7005-2, EN 1092-2:1997Blue Polyester RAL 501780 myClosing direction: CTCDN 125-300
Note:# Body in GGG 40, nickel
plated cast steel disc
10
226,00B61612576-0125-708370026901 #)264,00B91615076-0150-708370026901 #)381,00B131620076-0200-708370026901 #)765,00B251025076-0250-708370013901 #)929,00B341030076-0300-708370013901 #)
Butterflyvalves
Products for water according to EN593
EN 593
59 2007-07-10 10:47 CET
Gross priceEUR
Deliv.-code
Units pr.pallet
Theoreticalweight kg
PN bar
DN mm
AVK ref. nos.Type
Series 76/70
Butterfly valveconcentricWafer type EuronomicNBR rubber lined bodyStandard flange drilling toISO 7005-2, EN 1092-2:1997Blue Polyester RAL 501780 myClosing direction: CTCDN 100-300
Note:# Body in GGG 40, nickel
plated cast steel disc
11
171,00B51610076-0100-708270026901 #)226,00B61612576-0125-708270026901 #)264,00B91615076-0150-708270026901 #)381,00B131620076-0200-708270026901 #)765,00B251025076-0250-708270013901 #)929,00B341030076-0300-708270013901 #)
Gross priceEUR
Deliv.-code
Units pr.pallet
Theoreticalweight kg
PN bar
DN mm
AVK ref. nos.Type
Series 76/70
Butterfly valveconcentricWafer type EuronomicEPDM rubber lined bodyStandard flange drilling toISO 7005-2, EN 1092-2:1997Blue Epoxy RAL 5017 80myClosing direction: CTCDN 65-300
Note:# Body in GG 25, nickel
plated cast steel disc## Body in GG 25, nickel plated cast steel
disc, with worm gear alu. body
20
144,00B3166576-0065-708170026902 #)158,00B4168076-0080-708170026902 #)195,00B51610076-0100-708170026902 #)250,00B61612576-0125-708170026902 #)295,00B91615076-0150-708170026902 #)411,00B131620076-0200-708170026902 #)936,00B251025076-0250-708170013902 ##)
1.101,00B341030076-0300-708170013902 ##)
Gross priceEUR
Deliv.-code
Units pr.pallet
Theoreticalweight kg
PN bar
DN mm
AVK ref. nos.Type
Series 76/70
Butterfly valveconcentricWafer type EuronomicNBR rubber lined bodyStandard flange drilling toISO 7005-2, EN 1092-2:1997Blue Epoxy RAL 5017 80myClosing direction: CTCDN 50-250
Note:# Body in GG 25, nickel
plated cast steel disc## Body in GG 25, nickel plated cast steel
disc, with worm gear alu. body
21
137,00B3165076-0050-708070026902 #)144,00B3166576-0065-708070026902 #)158,00B4168076-0080-708070026902 #)195,00B51610076-0100-708070026902 #)250,00B61612576-0125-708070026902 #)411,00B131620076-0200-708070026902 #)936,00B251025076-0250-708070013902 ##)
Butterflyvalves
Products for water according to EN593
EN 593
60 2007-07-10 10:47 CET
Gross priceEUR
Deliv.-code
Units pr.pallet
Theoreticalweight kg
PN bar
DN mm
AVK ref. nos.Type
Series 76/71
Butterfly valveconcentricLug type EuronomicEPDM rubber lined bodyStandard flange drillingto ISO 7005-2, EN1092-2: 1997Blue Polyester RAL5017 80 myClosing direction: CTCDN 50-300
Note:# Body in GG 25, nickel
plated cast steel disc
01
141,00B4165076-0050-718170026901 #)178,00B4166576-0065-718170026901 #)192,00B6168076-0080-718170026901 #)977,00B281025076-0250-718170013901 #)
1.224,00B381030076-0300-718170013901 #)
Gross priceEUR
Deliv.-code
Units pr.pallet
Theoreticalweight kg
PN bar
DN mm
AVK ref. nos.Type
Series 76/71
Butterfly valveconcentricLug type EuronomicNBR rubber lined bodyStandard flange drillingto ISO 7005-2, EN1092-2: 1997Blue Polyester RAL5017 80 myClosing direction: CTCDN 50-300
Note:# Body in GG 25, nickel
plated cast steel disc
02
141,00B4165076-0050-718070026901 #)178,00B4166576-0065-718070026901 #)501,00B161620076-0200-718070026901 #)977,00B281025076-0250-718070013901 #)
1.224,00B381030076-0300-718070013901 #)
Gross priceEUR
Deliv.-code
Units pr.pallet
Theoreticalweight kg
PN bar
DN mm
AVK ref. nos.Type
Series 75/30
Butterfly valveconcentricSemi lug typeGGEPDM rubber linedbodyStandard flangedrilling to ISO7005-2, EN 1092-2:1997AVK coatingstandardClosing direction:CTCDN 50-200
Note:# Disc material in AISI 431
003
295,00A3165075-050-3010410009 #)302,00A4166575-065-3010410009 #)309,00A4168075-080-3010410009 #)353,00A51610075-100-3010410009 #)391,00A71612575-125-3010410009 #)525,00A101615075-150-3010410009 #)699,00A141620075-200-3010410009 #)
Butterflyvalves
Products for water according to EN593
EN 593
61 2007-07-10 10:47 CET
Gross priceEUR
Deliv.-code
Units pr.pallet
Theoreticalweight kg
PN bar
DN mm
AVK ref. nos.Type
Series 75/31
Butterfly valveconcentricSemi lug typeGGGEPDM rubber linedbodyStandard flangedrilling to ISO7005-2, EN 1092-2:1997AVK coatingstandardClosing direction:CTCDN 50-200
Note:# Disc material in AISI 431
003
374,00A3165075-050-3110410009 #)391,00A4166575-065-3110410009 #)391,00A4168075-080-3110410009 #)442,00A51610075-100-3110410009 #)501,00A71612575-125-3110410009 #)648,00A101615075-150-3110410009 #)915,00A141620075-200-3110410009 #)
Gross priceEUR
Deliv.-code
Units pr.pallet
Theoreticalweight kg
PN bar
DN mm
AVK ref. nos.Type
Series 75/40
Butterfly valveconcentricDouble flangedtypeISO 13GGEPDM rubber linedbodyStandard flangedrilling to ISO7005-2, EN1092-2: 1997AVK coatingstandardClosing direction: CTCDN 50-600
Note:# Disc material in AISI 431## Disc material in Rilsan coated Ductile iron
003
638,00A8165075-050-4010410009 #)672,00A11168075-080-4010410009 #)765,00A131610075-100-4010410009 #)857,00A171612575-125-4010410009 #)
1.104,00A231615075-150-4010410009 #)1.378,00A321020075-200-4010400009 #)1.378,00A321620075-200-4010410009 #)2.218,00A501025075-250-4010400009 #)2.218,00A501025075-250-4010410009 #)2.218,00A501025075-250-4012400009 ##)2.585,00A651030075-300-4010400009 #)2.585,00A651030075-300-4010410009 #)2.523,00A651030075-300-4012400009 ##)2.523,00A651030075-300-4012410009 ##)3.648,00B951035075-350-4010400009 #)3.648,00B951035075-350-4010410009 #)3.346,00B951035075-350-4012400009 ##)3.346,00B951035075-350-4012410009 ##)5.997,00B1301040075-400-4010400009 #)5.997,00B1301040075-400-4010410009 #)5.335,00B1301040075-400-4012400009 ##)5.335,00B1301040075-400-4012410009 ##)8.537,00B1501045075-450-4010400009 #)8.537,00B1501045075-450-4010410009 #)6.792,00B1501045075-450-4012400009 ##)6.792,00B1501045075-450-4012410009 ##)9.182,00B2001050075-500-4010410009 #)7.371,00B2001050075-500-4012400009 ##)7.371,00B2001050075-500-4012410009 ##)
14.873,00B3001060075-600-4010400009 #)14.873,00B3001060075-600-4010410009 #)11.643,00B3001060075-600-4012400009 ##)11.643,00B3001060075-600-4012410009 ##)
Butterflyvalves
Products for water according to EN593
EN 593
62 2007-07-10 10:47 CET
Gross priceEUR
Deliv.-code
Units pr.pallet
Theoreticalweight kg
PN bar
DN mm
AVK ref. nos.Type
Series 75/41
Butterfly valveconcentricDouble flangedtypeISO 13GGGEPDM rubber linedbodyStandard flangedrilling to ISO7005-2, EN1092-2: 1997AVK coatingstandardClosing direction: CTCDN 50-600
Note:# Disc material in AISI 431## Disc material in Rilsan coated Ductile iron
003
696,00A8165075-050-4110410009 #)741,00A9166575-065-4110410009 #)741,00A11168075-080-4110410009 #)864,00A131610075-100-4110410009 #)963,00A171612575-125-4110410009 #)
1.234,00A231615075-150-4110410009 #)1.605,00A321020075-200-4110400009 #)1.605,00A321620075-200-4110410009 #)2.393,00A501025075-200-4112400009 ##)2.393,00A501625075-250-4112410009 ##)2.695,00A651030075-300-4112400009 ##)2.695,00A651630075-300-4112410009 ##)3.843,00B951035075-350-4112400009 ##)3.843,00B951635075-350-4112410009 ##)5.451,00B1301040075-400-4112400009 ##)5.451,00B1301640075-400-4112410009 ##)7.286,00B1501045075-450-4112400009 ##)7.286,00B1501645075-450-4112410009 ##)7.951,00B2001050075-500-4112400009 ##)7.951,00B2001650075-500-4112410009 ##)
13.073,00B3001060075-600-4112400009 ##)13.073,00B3001660075-600-4112410009 ##)
Butterflyvalves
Products for water according to EN593
EN 593
63 2007-07-10 10:47 CET
Gross priceEUR
Deliv.-code
Units pr.pallet
Theoreticalweight kg
PN bar
DN mm
AVK ref. nos.Type
Series 76/70
Butterfly valveconcentricWafer type EuronomicEPDM rubber lined ballStandard flange drilling toISO 7005-2, EN 1092-2:1997Blue Polyester RAL 501780 myClosing direction: CTCDN 50-300
Note:# Body in GG 25, nickel
plated cast steel disc
01
117,00B3165076-0050-708170026901 #)123,00B3166576-0065-708170026901 #)137,00B4168076-0080-708170026901 #)171,00B51610076-0100-708170026901 #)226,00B61612576-0125-708170026901 #)264,00B91615076-0150-708170026901 #)381,00B131620076-0200-708170026901 #)765,00B251025076-0250-708170026901 #)929,00B341030076-0300-708170026901 #)
Gross priceEUR
Deliv.-code
Units pr.pallet
Theoreticalweight kg
PN bar
DN mm
AVK ref. nos.Type
Series 76/70
Butterfly valveconcentricWafer type EuronomicNBR rubber lined bodyStandard flange drilling toISO 7005-2, EN 1092-2:1997Blue Polyester RAL 501780 myClosing direction: CTCDN 50-300
Note:# Body in GG 25, nickel
plated cast steel disc
02
117,00B3165076-0050-708070026901 #)123,00B3166576-0065-708070026901 #)137,00B4168076-0080-708070026901 #)171,00B51610076-0100-708070026901 #)226,00B61612576-0125-708070026901 #)264,00B91615076-0150-708070026901 #)381,00B131620076-0200-708070026901 #)765,00B251025076-0250-708070026901 #)929,00B341030076-0300-708070026901 #)
Gross priceEUR
Deliv.-code
Units pr.pallet
Theoreticalweight kg
PN bar
DN mm
AVK ref. nos.Type
Series 76/70
Butterfly valveconcentricWafer type EuronomicEPDM rubber lined bodyStandard flange drilling toISO 7005-2, EN 1092-2:1997Blue Polyester RAL 501780 myClosing direction: CTCDN 125-300
Note:# Body in GGG 40, nickel
plated cast steel disc
10
226,00B61612576-0125-708370026901 #)264,00B91615076-0150-708370026901 #)381,00B131620076-0200-708370026901 #)765,00B251025076-0250-708370013901 #)929,00B341030076-0300-708370013901 #)
Butterflyvalves
Products for sewage according to EN593
EN 593
64 2007-07-10 10:47 CET
Gross priceEUR
Deliv.-code
Units pr.pallet
Theoreticalweight kg
PN bar
DN mm
AVK ref. nos.Type
Series 76/70
Butterfly valveconcentricWafer type EuronomicNBR rubber lined bodyStandard flange drilling toISO 7005-2, EN 1092-2:1997Blue Polyester RAL 501780 myClosing direction: CTCDN 100-300
Note:# Body in GGG 40, nickel
plated cast steel disc
11
171,00B51610076-0100-708270026901 #)226,00B61612576-0125-708270026901 #)264,00B91615076-0150-708270026901 #)381,00B131620076-0200-708270026901 #)765,00B251025076-0250-708270013901 #)929,00B341030076-0300-708270013901 #)
Gross priceEUR
Deliv.-code
Units pr.pallet
Theoreticalweight kg
PN bar
DN mm
AVK ref. nos.Type
Series 76/70
Butterfly valveconcentricWafer type EuronomicEPDM rubber lined bodyStandard flange drilling toISO 7005-2, EN 1092-2:1997Blue Epoxy RAL 5017 80myClosing direction: CTCDN 65-300
Note:# Body in GG 25, nickel
plated cast steel disc## Body in GG 25, nickel plated cast steel
disc, with worm gear alu. body
20
144,00B3166576-0065-708170026902 #)158,00B4168076-0080-708170026902 #)195,00B51610076-0100-708170026902 #)250,00B61612576-0125-708170026902 #)295,00B91615076-0150-708170026902 #)411,00B131620076-0200-708170026902 #)936,00B251025076-0250-708170013902 ##)
1.101,00B341030076-0300-708170013902 ##)
Gross priceEUR
Deliv.-code
Units pr.pallet
Theoreticalweight kg
PN bar
DN mm
AVK ref. nos.Type
Series 76/70
Butterfly valveconcentricWafer type EuronomicNBR rubber lined bodyStandard flange drilling toISO 7005-2, EN 1092-2:1997Blue Epoxy RAL 5017 80myClosing direction: CTCDN 50-250
Note:# Body in GG 25, nickel
plated cast steel disc## Body in GG 25, nickel plated cast steel
disc, with worm gear alu. body
21
137,00B3165076-0050-708070026902 #)144,00B3166576-0065-708070026902 #)158,00B4168076-0080-708070026902 #)195,00B51610076-0100-708070026902 #)250,00B61612576-0125-708070026902 #)411,00B131620076-0200-708070026902 #)936,00B251025076-0250-708070013902 ##)
Butterflyvalves
Products for sewage according to EN593
EN 593
65 2007-07-10 10:47 CET
Gross priceEUR
Deliv.-code
Units pr.pallet
Theoreticalweight kg
PN bar
DN mm
AVK ref. nos.Type
Series 76/71
Butterfly valveconcentricLug type EuronomicEPDM rubber lined bodyStandard flange drillingto ISO 7005-2, EN1092-2: 1997Blue Polyester RAL5017 80 myClosing direction: CTCDN 50-300
Note:# Body in GG 25, nickel
plated cast steel disc
01
141,00B4165076-0050-718170026901 #)178,00B4166576-0065-718170026901 #)192,00B6168076-0080-718170026901 #)977,00B281025076-0250-718170013901 #)
1.224,00B381030076-0300-718170013901 #)
Gross priceEUR
Deliv.-code
Units pr.pallet
Theoreticalweight kg
PN bar
DN mm
AVK ref. nos.Type
Series 76/71
Butterfly valveconcentricLug type EuronomicNBR rubber lined bodyStandard flange drillingto ISO 7005-2, EN1092-2: 1997Blue Polyester RAL5017 80 myClosing direction: CTCDN 50-300
Note:# Body in GG 25, nickel
plated cast steel disc
02
141,00B4165076-0050-718070026901 #)178,00B4166576-0065-718070026901 #)501,00B161620076-0200-718070026901 #)977,00B281025076-0250-718070013901 #)
1.224,00B381030076-0300-718070013901 #)
Gross priceEUR
Deliv.-code
Units pr.pallet
Theoreticalweight kg
PN bar
DN mm
AVK ref. nos.Type
Series 75/30
Butterfly valveconcentricSemi lug typeGGEPDM rubber linedbodyStandard flangedrilling to ISO7005-2, EN 1092-2:1997AVK coatingstandardClosing direction:CTCDN 50-200
Note:# Disc material in AISI 431
003
295,00A3165075-050-3010410009 #)302,00A4166575-065-3010410009 #)309,00A4168075-080-3010410009 #)353,00A51610075-100-3010410009 #)391,00A71612575-125-3010410009 #)525,00A101615075-150-3010410009 #)699,00A141620075-200-3010410009 #)
Butterflyvalves
Products for sewage according to EN593
EN 593
66 2007-07-10 10:47 CET
Gross priceEUR
Deliv.-code
Units pr.pallet
Theoreticalweight kg
PN bar
DN mm
AVK ref. nos.Type
Series 75/30
Butterfly valveconcentricSemi lug typeGGNBR rubber linedbodyStandard flangedrilling to ISO7005-2, EN 1092-2:1997AVK coatingstandardClosing direction:CTCDN 50-300
Note:# Disc material in AISI 431
013
295,00A3165075-050-3010210009 #)302,00A4166575-065-3010210009 #)309,00A4168075-080-3010210009 #)353,00A51610075-100-3010210009 #)391,00A71612575-125-3010210009 #)525,00A101615075-150-3010210009 #)699,00A141620075-200-3010210009 #)
1.327,00A241025075-250-3010200009 #)1.327,00A241625075-250-3010210009 #)1.327,00A241025075-250-3010400009 #)1.327,00A241625075-250-3010410009 #)1.632,00A361030075-300-3010200009 #)1.632,00A361630075-300-3010210009 #)1.632,00A361030075-300-3010400009 #)1.632,00A361630075-300-3010410009 #)
Gross priceEUR
Deliv.-code
Units pr.pallet
Theoreticalweight kg
PN bar
DN mm
AVK ref. nos.Type
Series 75/40
Butterfly valveconcentricDouble flangedtypeISO 13GGEPDM rubber linedbodyStandard flangedrilling to ISO7005-2, EN1092-2: 1997AVK coatingstandardClosing direction: CTCDN 50-600
Note:# Disc material in AISI 431## Disc material in Rilsan coated Ductile iron
003
638,00A8165075-050-4010410009 #)672,00A11168075-080-4010410009 #)765,00A131610075-100-4010410009 #)857,00A171612575-125-4010410009 #)
1.104,00A231615075-150-4010410009 #)1.378,00A321020075-200-4010400009 #)1.378,00A321620075-200-4010410009 #)2.218,00A501025075-250-4010400009 #)2.218,00A501025075-250-4010410009 #)2.218,00A501025075-250-4012400009 ##)2.585,00A651030075-300-4010400009 #)2.585,00A651030075-300-4010410009 #)2.523,00A651030075-300-4012400009 ##)2.523,00A651030075-300-4012410009 ##)3.648,00B951035075-350-4010400009 #)3.648,00B951035075-350-4010410009 #)3.346,00B951035075-350-4012400009 ##)3.346,00B951035075-350-4012410009 ##)5.997,00B1301040075-400-4010400009 #)5.997,00B1301040075-400-4010410009 #)5.335,00B1301040075-400-4012400009 ##)5.335,00B1301040075-400-4012410009 ##)8.537,00B1501045075-450-4010400009 #)8.537,00B1501045075-450-4010410009 #)6.792,00B1501045075-450-4012400009 ##)6.792,00B1501045075-450-4012410009 ##)9.182,00B2001050075-500-4010410009 #)7.371,00B2001050075-500-4012400009 ##)7.371,00B2001050075-500-4012410009 ##)
14.873,00B3001060075-600-4010400009 #)14.873,00B3001060075-600-4010410009 #)11.643,00B3001060075-600-4012400009 ##)11.643,00B3001060075-600-4012410009 ##)
Butterflyvalves
Products for sewage according to EN593
EN 593
67 2007-07-10 10:47 CET
Gross priceEUR
Deliv.-code
Units pr.pallet
Theoreticalweight kg
PN bar
DN mm
AVK ref. nos.Type
Series 75/40
Butterfly valveconcentricDouble flangedtypeISO 13GGNBR rubber linedbodyStandard flangedrilling to ISO7005-2, EN1092-2: 1997AVK coatingstandardClosing direction: CTCDN 50-600
Note:# Disc material in AISI 431
013
638,00A8165075-050-4010210009 #)672,00A9166575-065-4010210009 #)672,00A11168075-080-4010210009 #)765,00A131610075-100-4010210009 #)857,00A171612575-125-4010210009 #)
1.104,00A231615075-150-4010210009 #)1.378,00A321020075-200-4010200009 #)1.378,00A321620075-200-4010210009 #)2.218,00A501025075-250-4010200009 #)2.218,00A501025075-250-4010210009 #)2.585,00A651030075-300-4010200009 #)2.585,00A651030075-300-4010210009 #)3.648,00B951035075-350-4010200009 #)3.648,00B951035075-350-4010210009 #)5.997,00B1301040075-400-4010200009 #)5.997,00B1301040075-400-4010210009 #)8.537,00B1501045075-450-4010200009 #)8.537,00B1501045075-450-4010210009 #)9.182,00B2001050075-500-4010200009 #)9.182,00B2001050075-500-4010210009 #)
14.873,00B3001060075-600-4010200009 #)14.873,00B3001060075-600-4010210009 #)
Butterflyvalves
Products for sewage according to EN593
EN 593
68 2007-07-10 10:47 CET
Gross priceEUR
Deliv.-code
Units pr.pallet
Theoreticalweight kg
PN bar
DN mm
AVK ref. nos.Type
Series 75/40
Butterfly valveconcentricDouble flangedtypeISO 13GGNBR rubberlined bodyStandard flangedrilling to ISO7005-2, EN1092-2: 1997AVK coatingstandardClosing direction: CTCDN 50-600
Note:# Disc material in AISI 431
033
638,00A8165075-050-4010212009 #)672,00A9166575-065-4010212009 #)672,00A11168075-080-4010212009 #)765,00A131610075-100-4010212009 #)857,00A171612575-125-4010212009 #)
1.104,00A231615075-150-4010212009 #)1.378,00A321020075-200-4010202009 #)1.378,00A321620075-200-4010212009 #)2.218,00A501025075-250-4010202009 #)2.218,00A501025075-250-4010212009 #)2.585,00A651030075-300-4010202009 #)2.585,00A651030075-300-4010212009 #)3.648,00B951035075-350-4010202009 #)3.648,00B951035075-350-4010212009 #)5.997,00B1301040075-400-4010202009 #)5.997,00B1301040075-400-4010212009 #)8.537,00B1501045075-450-4010202009 #)8.537,00B1501045075-450-4010212009 #)9.182,00B2001050075-500-4010202009 #)9.182,00B2001050075-500-4010212009 #)
14.873,00B3001060075-600-4010202009 #)14.873,00B3001060075-600-4010212009 #)
Gross priceEUR
Deliv.-code
Units pr.pallet
Theoreticalweight kg
PN bar
DN mm
AVK ref. nos.Type
Series 75/41
Butterfly valveconcentricDouble flangedtypeISO 13GGGNBR rubberlined bodyStandard flangedrilling to ISO7005-2, EN1092-2: 1997AVK coatingstandardClosing direction: CTCDN 50-600
Note:# Disc material in AISI 431
033
696,00A8165075-050-4110212009 #)741,00A9166575-065-4110212009 #)741,00A11168075-080-4110212009 #)864,00A131610075-100-4110212009 #)963,00A171612575-125-4110212009 #)
1.234,00A231615075-150-4110212009 #)1.605,00A321620075-200-4110202009 #)1.605,00A321620075-200-4110212009 #)2.376,00A501025075-250-4110202009 #)2.376,00A501625075-250-4110212009 #)2.743,00A651030075-300-4110202009 #)2.743,00A651630075-300-4110212009 #)4.114,00B951035075-350-4110202009 #)4.114,00B951635075-350-4110212009 #)6.391,00B1301040075-400-4110202009 #)6.391,00B1301640075-400-4110212009 #)8.966,00B1501045075-450-4110202009 #)8.966,00B1501645075-450-4110212009 #)9.689,00B2001050075-500-4110202009 #)9.689,00B2001650075-500-4110212009 #)
16.193,00B3001060075-600-4110202009 #)16.193,00B3001660075-600-4110212009 #)
Butterflyvalves
Products for gas according to EN593
EN 593
69 2007-07-10 10:47 CET
Gross priceEUR
Deliv.-code
Units pr.pallet
Theoreticalweight kg
PN bar
DN mm
AVK ref. nos.Type
Series 75/31
Butterfly valveconcentricSemi lug typeGGGNBR rubber linedbodyStandard flangedrilling to ISO7005-2, EN 1092-2:1997AVK coatingstandardClosing direction:CTCDN 50-300
Note:# Disc material in Alubronze
023
363,00A3165075-050-3113210009 #)377,00A4166575-065-3113210009 #)377,00A4168075-080-3113210009 #)425,00A51610075-100-3113210009 #)501,00A71612575-125-3113210009 #)658,00A101615075-150-3113210009 #)957,00A141620075-200-3113210009 #)
1.577,00A241025075-250-3113200009 #)1.577,00A241625075-250-3113210009 #)1.920,00A361030075-300-3113200009 #)1.920,00A361630075-300-3113210009 #)
Gross priceEUR
Deliv.-code
Units pr.pallet
Theoreticalweight kg
PN bar
DN mm
AVK ref. nos.Type
Series 75/31
Butterfly valveconcentricSemi lug typeGGGNBR rubber linedbodyStandard flangedrilling to ISO7005-2, EN 1092-2:1997AVK coatingstandardClosing direction:CTCDN 50-300
Note:# Disc material in Duplex
024
408,00A3165075-050-3118210009 #)422,00A4166575-065-3118210009 #)425,00A4168075-080-3118210009 #)497,00A51610075-100-3118210009 #)579,00A71612575-125-3118210009 #)768,00A101615075-150-3118210009 #)
1.111,00A141620075-200-3118210009 #)1.985,00A241025075-250-3118200009 #)1.985,00A241625075-250-3118210009 #)2.383,00A361030075-300-3118200009 #)2.383,00A361630075-300-3118210009 #)
Gross priceEUR
Deliv.-code
Units pr.pallet
Theoreticalweight kg
PN bar
DN mm
AVK ref. nos.Type
Series 75/41
Butterfly valveconcentricDouble flangedtypeISO 13GGGNBR rubber linedbodyStandard flangedrilling to ISO7005-2, EN1092-2: 1997AVK coatingstandardClosing direction: CTCDN 50-600
Note:# Disc material in Alubronze## Disc material in Duplex
023
686,00A8165075-050-4113210009 #)723,00A8165075-050-4118210009 ##)734,00A9166575-065-4113210009 #)778,00A9166575-065-4118210009 ##)734,00A11168075-080-4113210009 #)782,00A11168075-080-4118210009 ##)843,00A131610075-100-4113210009 #)922,00A131610075-100-4118210009 ##)963,00A171612575-125-4113210009 #)
1.042,00A171612575-125-4118210009 ##)1.245,00A231615075-150-4113210009 #)1.358,00A231615075-150-4118210009 ##)1.646,00A321020075-200-4113200009 #)1.646,00A321620075-200-4113210009 #)1.800,00A321620075-200-4118200009 ##)1.800,00A321620075-200-4118210009 ##)2.397,00A501025075-250-4113200009 #)2.397,00A501625075-250-4113210009 #)2.801,00A501025075-250-4118200009 ##)2.801,00A501625075-250-4118210009 ##)2.791,00A651030075-300-4113200009 #)2.791,00A651630075-300-4113210009 #)3.257,00A651030075-300-4118200009 ##)3.257,00A651630075-300-4118210009 ##)4.210,00B951035075-350-4113200009 #)4.210,00B951635075-350-4113210009 #)
Butterflyvalves
Products for firefight according to EN593
EN 593
70 2007-07-10 10:47 CET
Gross priceEUR
Deliv.-code
Units pr.pallet
Theoreticalweight kg
PN bar
DN mm
AVK ref. nos.Type
Series 75/41
Butterfly valveconcentricDouble flangedtypeISO 13GGGNBR rubber linedbodyStandard flangedrilling to ISO7005-2, EN1092-2: 1997AVK coatingstandardClosing direction: CTCDN 50-600
Note:# Disc material in Alubronze## Disc material in Duplex
023
4.886,00B951035075-350-4118200009 ##)4.886,00B951035075-350-4118210009 ##)6.730,00B1301040075-400-4113200009 #)6.730,00B1301640075-400-4113210009 #)7.896,00B1301040075-400-4118200009 ##)7.896,00B1301640075-400-4118210009 ##)8.767,00B1501045075-450-4113200009 #)8.767,00B1501645075-450-4113210009 #)
10.553,00B1501045075-450-4118200009 ##)10.553,00B1501645075-450-4118210009 ##)10.224,00B2001050075-500-4113200009 #)10.224,00B2001650075-500-4113210009 #)11.246,00B2001050075-500-4118200009 ##)11.246,00B2001650075-500-4118210009 ##)16.570,00B3001060075-600-4113200009 #)16.570,00B3001660075-600-4113210009 #)19.049,00B3001060075-600-4118200009 ##)19.049,00B3001060075-600-4118210009 ##)
Butterflyvalves
Products for firefight according to EN593
EN 593
71 2007-07-10 10:47 CET
Designed to all standards ALL STD
.
Basic DIN design standard 2007-07-10 10:47 CET
Water
80/30, Surface Box forunderground fire hydrants acc.to DIN 4055, Housing in PA, Lid
73
80/31, Surface Box for gatevalves acc. to DIN 4056, Housingin PA, Lid in GG-20
73
80/32, Surface Box for serviceconn. valves acc. to DIN 4057,Housing in PA, Lid in GG-20
74
80/46, Support tile for surfaceboxes
74
730/4, UNI saddle head75
730/6, Stirrup Bush type75
731/09, Saddle head with flangedoutlet type UNI-FL
76
727/09, SWIC saddle withintegrated cutter forPE/PVC-pipes
76
602/00, Universal Supa stepcoupling, PN 16, Bolt Mild steel,PC2 = Sealing range
77
621/10, Supa Plus coupling withtensile resistant sealing ring forPE/uPVC-pipes, Bolt A2/Nut A4,
77
624/10, Supa Plus end cap,Tensile resistant forPVC/PE-pipes
77
603, Supa adaptor, PN 16, BoltA2/Nut A4, PC2 = sealing range
78
623/10, Supa Plus adaptor withtensile resistant sealing ring forPE/uPVC-pipes, Bolt A2/Nut A4,
78
729/10, Single band repair clamptype FS 10
79
729/18, Internal clamp 200 mmwidth
84
729/19, Internal clamp 400 mmwidth
84
729/2, Repair clamp type FSA84
729/20, Double band repairclamp type FS 20
90
729/28, External clamp 200 mmwidth
93
729/29, External clamp 400 mmwidth
93
729/3, Double/Triple band repairclamp type FST
94
729/30, Triple band repair clamptype FS 30
108
GAS
80/33, Surface Box for serviceconn. valves acc. to DIN 4059,Housing in PA, Lid in GG-20
112
80/34, Surface Box for gatevalves acc. to DIN 3581,Housing in PA, Lid in GG-20
112
80/35, Surface Box for gatevalves acc. to DIN 3582, Housingin PA, Lid in GG-20
112
80/46, Support tile for surfaceboxes
113
Gross priceEUR
Deliv.-code
Units pr.pallet
Theoreticalweight kg
AVK ref. nos.Type
Series 80/30
Surface Box forunderground firehydrants acc. toDIN 4055Housing in PALid in GG-20
Note:# Standard
01
110,00A161480-30-03200 #)
Gross priceEUR
Deliv.-code
Units pr.pallet
Theoreticalweight kg
AVK ref. nos.Type
Series 80/30
Surface Box forunderground firehydrants acc. toDIN 4055Housing in PALid in GG-20
Note:# Height
adjustable
02
150,00A161680-30-13000 #)
Gross priceEUR
Deliv.-code
Units pr.pallet
Theoreticalweight kg
AVK ref. nos.Type
Series 80/31
Surface Box forgate valves acc.to DIN 4056Housing in PALid in GG-20
Note:# Standard
01
53,00A30680-31-03200 #)
Gross priceEUR
Deliv.-code
Units pr.pallet
Theoreticalweight kg
AVK ref. nos.Type
Series 80/31
Surface Box for gatevalves acc. to DIN 4056Housing in PALid in GG-20
Note:# Height adjustable
02
79,00A30680-31-13000 #)
Surface boxes
Products for water according to ALL STD.
ALL STD
.
73 2007-07-10 10:47 CET
Gross priceEUR
Deliv.-code
Units pr.pallet
Theoreticalweight kg
AVK ref. nos.Type
Series 80/32
Surface Box for serviceconn. valves acc. to DIN4057Housing in PALid in GG-20
Note:# Standard
01
35,00A48380-32-03200 #)
Gross priceEUR
Deliv.-code
Units pr.pallet
Theoreticalweight kg
AVK ref. nos.Type
Series 80/32
Surface Box for serviceconn. valves acc. to DIN4057Housing in PALid in GG-20
Note:# Height adjustable
02
51,00A48480-32-13000 #)
Gross priceEUR
Units pr.pallet
Theoreticalweight kg
Deliv.-code
AVK ref. nos.Type
Series 80/46
Support tile forsurface boxes
Note:# With spindle
fixation. Fortype 80/31,80/32, 80/33and 80/34
01
8,00601A80-46-00001 #)
Gross priceEUR
Units pr.pallet
Theoreticalweight kg
Deliv.-code
AVK ref. nos.Type
Series 80/46
Support tile forsurface boxes
Note:# For type 80/31,
80/32, 80/33and 80/34
02
8,001A80-46-00000 #)
Surface boxes
Products for water according to ALL STD.
ALL STD
.
74 2007-07-10 10:47 CET
Gross priceEUR
Units pr.pallet
Theoreticalweight kg
Deliv.-code
AVK ref. nos.Type
Series 80/46
Support tile forsurface boxes
Note:# For type 80/30
and 80/35
03
17,002A80-46-00005 #)
Gross priceEUR
Deliv.-code
Units pr.pallet
PN bar
DN/DNmm
AVK ref. nos.Type
Series 730/4
UNI saddle headEpoxy coatedaccording to DIN30677-2 andGSK guide lines
Note:# Excl. stirrup
01
69,00B1650-200730-4-050-100 #)69,00B1650-200730-4-050-200 #)69,00B1650-200730-4-050-300 #)69,00B1650-200730-4-050-400 #)69,00B1650-200730-4-050-500 #)
Gross priceEUR
Deliv.-code
Units pr.pallet
PN bar
DN/DNmm
AVK ref. nos.Type
Series 730/4
UNI saddle headEpoxy coatedaccording to DIN30677-2 andGSK guide lines
Note:# Excl. stirrup
02
77,00B1680-300730-4-080-100 #)77,00B1680-300730-4-080-200 #)77,00B1680-300730-4-080-300 #)77,00B1680-300730-4-080-400 #)77,00B1680-300730-4-080-500 #)77,00B1680-300730-4-080-600 #)
Gross priceEUR
Deliv.-code
Units pr.pallet
Tmm
DN mm
AVK ref. nos.Type
Series 730/6
Stirrup BushtypeDN 50-300
001
43,00B50-8850730-6-088-02144,00B88-11880730-6-11802145,00B105-133100730-6-13302146,00B133-159125730-6-15902147,00B156-186150730-6-18602150,00B186-216175730-6-21602151,00B210-244200730-6-24402154,00B240-270225730-6-27002157,00B265-298250730-6-29802158,00B299-330275730-6-33002159,00B315-345300730-6-34502162,00B325-365300730-6-360021
Surface boxesTappingsaddles
Products for water according to ALL STD.
ALL STD
.
75 2007-07-10 10:47 CET
Gross priceEUR
Deliv.-code
Tmm
DN2mm
AVK ref. nos.Type
Series 731/09
Saddle head withflanged outlet typeUNI-FLEpoxy coatedaccording to DIN30677-2 and GSKguide linesDN 40-300
Note:# Excl. stirrup
00
104,00B88-36040731-0-9-000-03-00 #)120,00B88-36050731-0-9-000-03-01 #)154,00B105-13380731-0-9-000-04-03 #)154,00B133-15980731-0-9-000-05-03 #)161,00B156-18680731-0-9-000-06-03 #)192,00B156-186100731-0-9-000-06-04 #)206,00B210-24480731-0-9-000-07-03 #)237,00B210-244100731-0-9-000-07-04 #)313,00B210-244150731-0-9-000-07-06 #)206,00B265-29880731-0-9-000-08-03 #)237,00B265-298100731-0-9-000-08-04 #)313,00B265-298150731-0-9-000-08-06 #)213,00B315-34580731-0-9-000-09-03 #)246,00B315-345100731-0-9-000-09-04 #)322,00B315-345150731-0-9-000-09-06 #)
Gross priceEUR
Deliv.-code
Theoreticalweight kg
PN bar
Dmm
AVK ref. nos.Type
Series 727/09
SWIC saddle withintegrated cutter forPE/PVC-pipesEpoxy coated according toDIN 30677-2 and GSKguide linesClosing direction: CTC
Note:# 1/2" BSP thread## 3/4" BSP thread### 1" BSP thread#### 1 1/4" BSP
thread##### 1 1/2" BSP thread###### 2" BSP thread
01
295,00B51650727-09-050-0120 #)295,00B51650727-09-050-0220 ##)295,00B51650727-09-0500320 ###)295,00B51650727-09-050-0420 ####)295,00B51663727-09-063-0120 #)295,00B51663727-09-063-0220 ##)295,00B51663727-09-0630320 ###)295,00B51663727-09-063-0420 ####)308,00B61675727-09-075-0120 #)308,00B61675727-09-075-0220 ##)308,00B61675727-09-0750320 ###)308,00B61675727-09-075-0420 ####)308,00B61675727-09-0750520 #####)308,00B61675727-09-075-0620 ######)323,00B61690727-09-090-0120 #)323,00B61690727-09-090-0220 ##)323,00B61690727-09-0900320 ###)323,00B61690727-09-090-0420 ####)323,00B61690727-09-0900520 #####)323,00B61690727-09-090-0620 ######)344,00B716110727-09-110-0120 #)344,00B716110727-09-110-0220 ##)344,00B716110727-09-1100320 ###)344,00B716110727-09-110-0420 ####)344,00B716110727-09-1100520 #####)344,00B716110727-09-110-0620 ######)359,00B816125727-09-125-0120 #)359,00B816125727-09-125-0220 ##)359,00B816125727-09-1250320 ###)359,00B816125727-09-125-0420 ####)359,00B816125727-09-1250520 #####)359,00B816125727-09-125-0620 ######)373,00B916140727-09-140-0120 #)373,00B916140727-09-140-0220 ##)373,00B916140727-09-1400320 ###)373,00B916140727-09-140-0420 ####)373,00B916140727-09-1400520 #####)373,00B916140727-09-140-0620 ######)409,00B1116160727-09-160-0120 #)409,00B1116160727-09-160-0220 ##)409,00B1116160727-09-1600320 ###)409,00B1116160727-09-160-0420 ####)409,00B1116160727-09-1600520 #####)409,00B1116160727-09-160-0620 ######)640,00B1416200727-09-200-0120 #)640,00B1416200727-09-200-0220 ##)640,00B1416200727-09-2000320 ###)640,00B1416200727-09-200-0420 ####)640,00B1416200727-09-2000520 #####)640,00B1416200727-09-200-0620 ######)660,00B1616225727-09-225-0120 #)660,00B1616225727-09-225-0220 ##)660,00B1616225727-09-2250320 ###)660,00B1616225727-09-225-0420 ####)660,00B1616225727-09-2250520 #####)660,00B1616225727-09-225-0620 ######)
Tappingsaddles
Products for water according to ALL STD.
ALL STD
.
76 2007-07-10 10:47 CET
Gross priceEUR
Deliv.-code
Units pr.pallet
Theoreticalweight kg
PN bar
PC3mm
AVK ref. nos.Type
Series 602/00
Universal Supastep couplingPN 16Bolt Mild steelPC2 = SealingrangeEPDM sealingsEpoxy coatedaccording to DIN30677-2 andGSK guide linesDN 40-400
001
194,00A14731657-74602-0630746400194,00A14741668-85602-0630856400194,00A14741668-85602-0740856400194,00A14751684-106602-0741066400264,00A14751684-106602-0851066400284,00A14751699-119602-1061196400284,00A147516109-133602-1061336400308,00A147616109-133602-1191336400308,00A147616132-157602-1191576400308,00A147616132-157602-1331576400318,00A147716157-183602-1331836400318,00A147816157-183602-1571836400318,00A147916176-201602-1832016400432,00A1471016193-215602-2012156400432,00A1471116218-242602-2012426400544,00A1471116218-242602-2152426400660,00A1471316242-268602-2152686400766,00A1471416242-268602-2422686400766,00A1471516266-292602-2682926400766,00A1471616280-306602-2923066400766,00A1471616301-327602-2923276400766,00A1471716324-350602-3273506400804,00A1471916352-378602-3273786400804,00A1472016352-378602-3503786400
1.053,00A1472116372-396602-37839664001.166,00A1472116384-410602-39641064001.638,00A1472216410-436602-41043664001.810,00A1472316436-462602-4364626400
Gross priceEUR
Deliv.-code
Theoreticalweight kg
Dmm
DN mm
AVK ref. nos.Type
Series 621/10
Supa Pluscoupling withtensile resistantsealing ring forPE/uPVC-pipesBolt A2/Nut A4Min. GGG-40EPDM sealingsEpoxy coatedaccording to DIN30677-2 andGSK guide linesDN 32-300
001
106,00A34032621-10-04061115,00A35040621-10-05061124,00A46350621-10-06361133,00A47565621-10-07561153,00A59080621-10-09061166,00A7110100621-10-11061203,00A8125125621-10-12561213,00A9140125621-10-14061271,00A10160150621-10-16061383,00A10110150621-10-180-61496,00A16200200621-10-20061496,00A20225200621-10-22561705,00A28250250621-10-25061810,00A30280250621-10-28061
1.032,00A45315300621-10-31561
Gross priceEUR
Deliv.-code
PN bar
DN mm
AVK ref. nos.Type
Series 624/10
Supa Plus endcapTensile resistantforPVC/PE-pipesEPDM rubberwedgeEpoxy coatedaccording to DIN30677-2 andGSK guide linesDN 32-300
Note:# 1 1/4" BSP thread, In line, Bolts A2, Nut
A4## 2" BSP thread, In line, Bolts A2, Nut A4
/10
130,00A1632624-10-0406100041 #)130,00A1640624-10-0506100041 #)142,00A1650624-10-0636100041 #)142,00A1650624-10-0636100061 ##)149,00A1665624-10-0756100041 #)149,00A1665624-10-0756100061 ##)154,00A1680624-10-0906100041 #)154,00A1680624-10-0906100061 ##)199,00A16100624-10-1106100041 #)199,00A16100624-10-1106100061 ##)223,00A16125624-10-1256100041 #)223,00A16125624-10-1256100061 ##)234,00A16125624-10-1406100041 #)234,00A16125624-10-1406100061 ##)248,00A16150624-10-1606100041 #)248,00A16150624-10-1606100061 ##)286,00A16150624-10-1806100041 #)286,00A16150624-10-1806100061 ##)331,00A16200624-10-2006100041 #)331,00A16200624-10-2006100061 ##)489,00A16200624-10-2256100041 #)
Couplings
Products for water according to ALL STD.
ALL STD
.
77 2007-07-10 10:47 CET
Gross priceEUR
Deliv.-code
PN bar
DN mm
AVK ref. nos.Type
Series 624/10
Supa Plus endcapTensile resistantforPVC/PE-pipesEPDM rubberwedgeEpoxy coatedaccording to DIN30677-2 andGSK guide linesDN 32-300
Note:# 1 1/4" BSP thread, In line, Bolts A2, Nut
A4## 2" BSP thread, In line, Bolts A2, Nut A4
/10
489,00A16200624-10-2256100061 ##)578,00A16250624-10-2506100041 #)578,00A16250624-10-2506100061 ##)702,00A16250624-10-2806100041 #)702,00A16250624-10-2806100061 ##)815,00A16300624-10-3156100041 #)815,00A16300624-10-3156100061 ##)
Gross priceEUR
Deliv.-code
Theoreticalweight kg
PC2mm
DN mm
AVK ref. nos.Type
Series 603
Supa adaptorPN 16Bolt A2/Nut A4PC2 = sealingrangeEPDM sealingsEpoxy coatedaccording to DIN30677-2 andGSK guide linesDN 40-400
Note:# Universal drilling PN 10/16. Info on ANSI/
BS drilling see data sheet.
001
112,00A446-6340603-063-0006400 #)113,00A457-7450603-074-0006400 #)164,00A457-7450603-074-0016400 #)164,00A468-8550603-085-0006400 #)130,00A584-10680603-106-0006400 #)146,00A584-10680603-106-0016400 #)146,00A699-119100603-119-0006400 #)146,00A6109-133100603-133-0006400 #)286,00A7109-133100603-133-0016400 #)286,00A8132-157125603-157-0006400 #)286,00A8157-183150603-183-0006400 #)216,00A10176-201150603-201-0006400 #)407,00A12193-215200603-215-0006400 #)354,00A12218-242200603-242-0006400 #)518,00A17242-268250603-268-0006400 #)518,00A18266-292250603-292-0006400 #)518,00A19280-306250603-306-0006400 #)580,00A22301-327300603-327-0006400 #)580,00A24324-350300603-350-0006400 #)866,00A25352-378350603-378-0006400 #)866,00A29372-396350603-396-0006400 #)866,00A29384-410350603-410-0006400 #)
1.410,00A35410-436400603-436-0006400 #)1.410,00A37436-462400603-462-0006400 #)
Gross priceEUR
Deliv.-code
Theoreticalweight kg
PN bar
Dmm
DN mm
AVK ref. nos.Type
Series 623/10
Supa Plusadaptor withtensile resistantsealing ring forPE/uPVC-pipesBolt A2/Nut A4Min. GGG-40EPDM sealingsEpoxy coatedaccording to DIN30677-2 andGSK guide linesDN 40-300
Note:# 10/16 = Universal drilling, incl. EPDM
flange gasket## Incl. EPDM flange gasket
001
94,00A410/164040623-10-0406161 #)94,00A410/165040623-10-0506161 #)
114,00A410/166350623-10-0636161 #)114,00A510/167565623-10-0756161 #)132,00A510/169080623-10-0906161 #)145,00A710/16110100623-10-1106161 #)192,00A710/16125125623-10-1256161 #)192,00A710/16140125623-10-1406161 #)233,00A810/16160150623-10-1606161 #)279,00A1010/16285150623-10-180-6161 #)387,00A1416200200623-10-2006161 ##)391,00A1516225200623-10-2256161 ##)536,00A2510/16250250623-10-2506161 #)617,00A2510/16280250623-10-2806161 #)808,00A2910/16315300623-10-3156161 #)
Couplings
Flangeadaptors
Products for water according to ALL STD.
ALL STD
.
78 2007-07-10 10:47 CET
Gross priceEUR
Deliv.-code
Tmm
Lmm
AVK ref. nos.Type
Series 729/10
Single bandrepair clamptype FS 10NBR sealings
Note:# AISI 304
05
53,00A48-52100729-0052-1005 #)68,00A48-52150729-0052-1105 #)80,00A48-52200729-0052-1205 #)
111,00B48-52250729-0052-1305 #)123,00B48-52300729-0052-1405 #)168,00B48-52400729-0052-1505 #)53,00B54-58100729-0058-1005 #)68,00A54-58150729-0058-1105 #)80,00A54-58200729-0058-1205 #)
112,00B54-58250729-0058-1305 #)123,00B54-58300729-0058-1405 #)170,00B54-58400729-0058-1505 #)54,00A60-67100729-0067-1005 #)69,00A60-67150729-0067-1105 #)80,00A60-67200729-0067-1205 #)
112,00B60-67250729-0067-1305 #)123,00A60-67300729-0067-1405 #)170,00B60-67400729-0067-1505 #)220,00B60-67500729-0067-1605 #)54,00B67-74100729-0074-1005 #)81,00A67-74200729-0074-1205 #)
116,00B67-74250729-0074-1305 #)127,00B67-74300729-0074-1405 #)175,00B67-74400729-0074-1505 #)223,00B67-74500729-0074-1605 #)54,00A70-77100729-0077-1005 #)71,00A70-77150729-0077-1105 #)83,00A70-77200729-0077-1205 #)
116,00B70-77250729-0077-1305 #)127,00B70-77300729-0077-1405 #)172,00B70-77400729-0077-1505 #)225,00B70-77500729-0077-1605 #)54,00A73-80100729-0080-1005 #)71,00B73-80150729-0080-1105 #)83,00A73-80200729-0080-1205 #)
116,00B73-80250729-0080-1305 #)129,00A73-80300729-0080-1405 #)173,00B73-80400729-0080-1505 #)227,00B73-80500729-0080-1605 #)56,00B76-83100729-0083-1005 #)72,00A76-83150729-0083-1105 #)84,00A76-83200729-0083-1205 #)
117,00B76-83250729-0083-1305 #)129,00B76-83300729-0083-1405 #)173,00B76-83400729-0083-1505 #)229,00B76-83500729-0083-1605 #)56,00B82-89100729-0089-1005 #)72,00B82-89150729-0089-1105 #)84,00A82-89200729-0089-1205 #)
117,00B82-89250729-0089-1305 #)130,00A82-89300729-0089-1405 #)176,00B82-89400729-0089-1505 #)230,00B82-89500729-0089-1605 #)56,00B87-94100729-0094-1005 #)72,00B87-94150729-0094-1105 #)86,00A87-94200729-0094-1205 #)
118,00B87-94250729-0094-1305 #)132,00A87-94300729-0094-1405 #)176,00B87-94400729-0094-1505 #)231,00B87-94500729-0094-1605 #)56,00B91-98100729-0098-1005 #)72,00B91-98150729-0098-1105 #)86,00B89-98200729-0098-1205 #)
118,00B91-98250729-0098-1305 #)132,00B91-98300729-0098-1405 #)178,00B91-98400729-0098-1505 #)234,00B91-98500729-0098-1605 #)56,00B95-102100729-0102-1005 #)74,00B95-102150729-0102-1105 #)89,00A95-102200729-0102-1205 #)
136,00A95-102300729-0102-1405 #)182,00B95-102400729-0102-1505 #)237,00B95-102500729-0102-1605 #)56,00B98-108100729-0108-1005 #)72,00B98-108150729-0108-1105 #)87,00B98-108200729-0108-1205 #)
121,00B98-108250729-0108-1305 #)133,00B98-108300729-0108-1405 #)179,00B98-108400729-0108-1505 #)240,00B98-108500729-0108-1605 #)57,00B88-110100729-0112-1005 #)74,00B102-112150729-0112-1105 #)
Repair clam
ps
Products for water according to ALL STD.
ALL STD
.
79 2007-07-10 10:47 CET
Gross priceEUR
Deliv.-code
Tmm
Lmm
AVK ref. nos.Type
Series 729/10
Single bandrepair clamptype FS 10NBR sealings
Note:# AISI 304
05
124,00B102-112250729-0112-1305 #)183,00B102-112400729-0112-1505 #)243,00B102-112500729-0112-1605 #)75,00B106-116150729-0116-1105 #)
127,00B106-116250729-0116-1305 #)189,00B106-116400729-0116-1505 #)245,00B106-116500729-0116-1605 #)59,00B108-118100729-0118-1005 #)
189,00B108-118400729-0118-1505 #)249,00B108-118500729-0118-1605 #)59,00B113-123100729-0123-1005 #)75,00B113-123150729-0123-1105 #)
192,00B113-123400729-0123-1505 #)251,00B113-123500729-0123-1605 #)59,00B118-128100729-0128-1005 #)75,00B118-128150729-0128-1105 #)
129,00B118-128250729-0128-1305 #)197,00B118-128400729-0128-1505 #)252,00B118-128500729-0128-1605 #)59,00B120-131100729-0131-1005 #)77,00B120-131150729-0131-1105 #)
131,00B120-131250729-0131-1305 #)203,00B120-131400729-0131-1505 #)254,00B120-131500729-0131-1605 #)161,00B114-134200729-0134-2205 #)59,00B125-135100729-0135-1005 #)77,00B125-135150729-0135-1105 #)95,00B125-135200729-0135-1205 #)
129,00B125-135250729-0135-1305 #)145,00B125-135300729-0135-1405 #)203,00B125-135400729-0135-1505 #)256,00B125-135500729-0135-1605 #)60,00B132-142100729-0142-1005 #)80,00B132-142150729-0142-1105 #)96,00B132-142200729-0142-1205 #)
134,00B132-142250729-0142-1305 #)208,00B132-142400729-0142-1505 #)257,00B132-142500729-0142-1605 #)60,00B135-145100729-0145-1005 #)78,00B135-145150729-0145-1105 #)
133,00B135-145250729-0145-1305 #)204,00B135-145400729-0145-1505 #)260,00B135-145500729-0145-1605 #)62,00B145-155100729-0155-1005 #)80,00B145-155150729-0155-1105 #)
136,00B145-155250729-0155-1305 #)151,00B145-155300729-0155-1405 #)204,00B145-155400729-0155-1505 #)259,00B145-155500729-0155-1605 #)63,00B151-161100729-0161-1005 #)83,00B151-161150729-0161-1105 #)
101,00B151-161200729-0161-1205 #)140,00B151-161250729-0161-1305 #)209,00B151-161400729-0161-1505 #)267,00B151-161500729-0161-1605 #)319,00B151-161600729-0161-1705 #)63,00B159-170100729-0170-1005 #)83,00B159-170150729-0170-1105 #)
139,00B159-170250729-0170-1305 #)209,00B159-170400729-0170-1505 #)318,00B159-170600729-0170-1705 #)65,00B165-175100729-0175-1005 #)
104,00B165-175200729-0175-1205 #)215,00B165-175400729-0175-1505 #)271,00B165-175500729-0175-1605 #)327,00B165-175600729-0175-1705 #)66,00B167-177100729-0177-1005 #)87,00B167-177150729-0177-1105 #)
143,00A167-177250729-0177-1305 #)160,00B167-177300729-0177-1405 #)217,00B167-177400729-0177-1505 #)274,00B167-177500729-0177-1605 #)328,00B167-177600729-0177-1705 #)66,00B170-180100729-0180-1005 #)86,00B170-180150729-0180-1105 #)
102,00B170-180200729-0180-1205 #)142,00B170-180250729-0180-1305 #)159,00B170-180300729-0180-1405 #)215,00B170-180400729-0180-1505 #)271,00B170-180500729-0180-1605 #)324,00B170-180600729-0180-1705 #)66,00B174-184100729-0184-1005 #)
Repair clam
ps
Products for water according to ALL STD.
ALL STD
.
80 2007-07-10 10:47 CET
Gross priceEUR
Deliv.-code
Tmm
Lmm
AVK ref. nos.Type
Series 729/10
Single bandrepair clamptype FS 10NBR sealings
Note:# AISI 304
05
87,00B174-184150729-0184-1105 #)105,00B174-184200729-0184-1205 #)145,00B174-184250729-0184-1305 #)163,00B174-184300729-0184-1405 #)220,00B174-184400729-0184-1505 #)277,00B174-184500729-0184-1605 #)331,00B174-184600729-0184-1705 #)68,00B176-186100729-0186-1005 #)89,00B176-186150729-0186-1105 #)
146,00B176-186250729-0186-1305 #)164,00B176-186300729-0186-1405 #)221,00B176-186400729-0186-1505 #)279,00B176-186500729-0186-1605 #)334,00B176-186600729-0186-1705 #)68,00B180-190100729-0190-1005 #)87,00B180-190150729-0190-1105 #)
107,00B180-190200729-0190-1205 #)145,00B180-190250729-0190-1305 #)163,00B180-190300729-0190-1405 #)221,00B180-190400729-0190-1505 #)277,00B180-190500729-0190-1605 #)335,00B180-190600729-0190-1705 #)68,00B186-196100729-0196-1005 #)90,00B186-196150729-0196-1105 #)
110,00B186-196200729-0196-1205 #)149,00B186-196250729-0196-1305 #)167,00B186-196300729-0196-1405 #)227,00B186-196400729-0196-1505 #)286,00B186-196500729-0196-1605 #)345,00B186-196600729-0196-1705 #)69,00B193-203100729-0203-1005 #)90,00B193-203150729-0203-1105 #)
110,00B193-203200729-0203-1205 #)150,00B193-203250729-0203-1305 #)169,00B193-203300729-0203-1405 #)227,00B193-203400729-0203-1505 #)286,00B193-203500729-0203-1605 #)343,00B193-203600729-0203-1705 #)71,00B200-210100729-0210-1005 #)93,00B200-210150729-0210-1105 #)
113,00B200-210200729-0210-1205 #)154,00B200-210250729-0210-1305 #)235,00B200-210400729-0210-1505 #)297,00B200-210500729-0210-1605 #)354,00B200-210600729-0210-1705 #)72,00B209-220100729-0220-1005 #)93,00B209-220150729-0220-1105 #)
112,00B209-220200729-0220-1205 #)154,00B209-220250729-0220-1305 #)173,00B209-220300729-0220-1405 #)234,00B209-220400729-0220-1505 #)295,00B209-220500729-0220-1605 #)354,00B209-220600729-0220-1705 #)72,00B215-225100729-0225-1005 #)96,00B215-225150729-0225-1105 #)
178,00A215-225300729-0225-1405 #)241,00B215-225400729-0225-1505 #)303,00B215-225500729-0225-1605 #)365,00B215-225600729-0225-1705 #)74,00B219-229100729-0229-1005 #)96,00B219-229150729-0229-1105 #)
116,00B219-229200729-0229-1205 #)157,00B219-229250729-0229-1305 #)176,00B219-229300729-0229-1405 #)240,00B219-229400729-0229-1505 #)299,00B219-229500729-0229-1605 #)361,00B219-229600729-0229-1705 #)75,00B222-233100729-0233-1005 #)
101,00B222-233150729-0233-1105 #)118,00B222-233200729-0233-1205 #)159,00B222-233250729-0233-1305 #)179,00B222-233300729-0233-1405 #)246,00B222-233400729-0233-1505 #)308,00B222-233500729-0233-1605 #)367,00B222-233600729-0233-1705 #)77,00B229-239100729-0239-1005 #)
102,00B228-239150729-0239-1105 #)120,00B228-239200729-0239-1205 #)161,00B228-239250729-0239-1305 #)182,00B228-239300729-0239-1405 #)250,00B228-239400729-0239-1505 #)313,00B228-239500729-0239-1605 #)
Repair clam
ps
Products for water according to ALL STD.
ALL STD
.
81 2007-07-10 10:47 CET
Gross priceEUR
Deliv.-code
Tmm
Lmm
AVK ref. nos.Type
Series 729/10
Single bandrepair clamptype FS 10NBR sealings
Note:# AISI 304
05
373,00B228-239600729-0239-1705 #)78,00B230-240100729-0240-1005 #)
104,00B230-240150729-0240-1105 #)124,00B230-240200729-0240-1205 #)163,00B230-240250729-0240-1305 #)184,00B230-240300729-0240-1405 #)256,00B230-240400729-0240-1505 #)318,00B230-240500729-0240-1605 #)375,00B230-240600729-0240-1705 #)80,00B237-247100729-0247-1005 #)
104,00B237-247150729-0247-1105 #)124,00B237-247200729-0247-1205 #)163,00B237-247250729-0247-1305 #)183,00B237-247300729-0247-1405 #)256,00B237-247400729-0247-1505 #)318,00B237-247500729-0247-1605 #)373,00B237-247600729-0247-1705 #)81,00B239-249100729-0249-1005 #)
107,00B239-249150729-0249-1105 #)130,00B239-249200729-0249-1205 #)169,00B239-249250729-0249-1305 #)190,00B239-249300729-0249-1405 #)267,00B239-249400729-0249-1505 #)328,00B239-249500729-0249-1605 #)384,00B239-249600729-0249-1705 #)83,00B243-254100729-0254-1005 #)
107,00B243-254150729-0254-1105 #)130,00B243-254200729-0254-1205 #)169,00B243-254250729-0254-1305 #)192,00B243-254300729-0254-1405 #)327,00B243-254500729-0254-1605 #)385,00B243-254600729-0254-1705 #)86,00B250-260100729-0260-1005 #)
114,00B250-260150729-0260-1105 #)136,00B250-260200729-0260-1205 #)181,00B250-260250729-0260-1305 #)202,00B250-260300729-0260-1405 #)274,00B250-260400729-0260-1505 #)339,00B250-260500729-0260-1605 #)399,00B250-260600729-0260-1705 #)86,00B252-263100729-0263-1005 #)
112,00B252-263150729-0263-1105 #)135,00B252-263200729-0263-1205 #)179,00B252-263250729-0263-1305 #)200,00B252-263300729-0263-1405 #)274,00B252-263400729-0263-1505 #)337,00B252-262500729-0263-1605 #)400,00B252-263600729-0263-1705 #)87,00B261-271100729-0271-1005 #)
116,00B261-271150729-0271-1105 #)139,00B261-271200729-0271-1205 #)184,00B261-271250729-0271-1305 #)206,00B261-271300729-0271-1405 #)283,00B261-271400729-0271-1505 #)348,00B261-271500729-0271-1605 #)414,00B261-271600729-0271-1705 #)89,00B266-276100729-0276-1005 #)
116,00B266-276150729-0276-1105 #)139,00B266-276200729-0276-1205 #)182,00B266-276250729-0276-1305 #)204,00B266-276300729-0276-1405 #)281,00B266-276400729-0276-1505 #)347,00B266-276500729-0276-1605 #)415,00B266-276600729-0276-1705 #)89,00B270-280100729-0280-1005 #)
119,00B270-280150729-0280-1105 #)187,00B270-280250729-0280-1305 #)214,00B270-280300729-0280-1405 #)292,00B270-280400729-0280-1505 #)357,00B270-280500729-0280-1605 #)429,00B270-280600729-0280-1705 #)90,00B273-283100729-0283-1005 #)
118,00B273-283150729-0283-1105 #)144,00B273-283200729-0283-1205 #)186,00B273-283250729-0283-1305 #)210,00B273-283300729-0283-1405 #)289,00B273-283400729-0283-1505 #)357,00B273-283500729-0283-1605 #)429,00B273-283600729-0283-1705 #)93,00B280-291100729-0291-1005 #)
121,00B281-291150729-0291-1105 #)147,00B280-291200729-0291-1205 #)
Repair clam
ps
Products for water according to ALL STD.
ALL STD
.
82 2007-07-10 10:47 CET
Gross priceEUR
Deliv.-code
Tmm
Lmm
AVK ref. nos.Type
Series 729/10
Single bandrepair clamptype FS 10NBR sealings
Note:# AISI 304
05
192,00B280-291250729-0291-1305 #)218,00B280-291300729-0291-1405 #)293,00B280-291400729-0291-1505 #)363,00B280-291500729-0291-1605 #)437,00B280-291600729-0291-1705 #)93,00B290-300100729-0300-1005 #)
123,00B290-300150729-0300-1105 #)148,00B290-300200729-0300-1205 #)195,00B290-300250729-0300-1305 #)222,00B290-300300729-0300-1405 #)297,00B290-300400729-0300-1505 #)367,00B290-300500729-0300-1605 #)444,00B290-300600729-0300-1705 #)126,00B300-310150729-0310-1105 #)154,00B300-310200729-0310-1205 #)202,00B300-310250729-0310-1305 #)229,00B300-310300729-0310-1405 #)306,00B300-310400729-0310-1505 #)378,00B300-310500729-0310-1605 #)459,00B300-310600729-0310-1705 #)126,00B310-320150729-0320-1105 #)154,00B310-320200729-0320-1205 #)201,00B310-320250729-0320-1305 #)228,00B310-320300729-0320-1405 #)303,00B310-320400729-0320-1505 #)376,00B310-320500729-0320-1605 #)456,00B310-320600729-0320-1705 #)130,00B315-325150729-0325-1105 #)158,00B315-325200729-0325-1205 #)234,00B315-325300729-0325-1405 #)312,00B315-325400729-0325-1505 #)390,00B315-325500729-0325-1605 #)467,00B315-325600729-0325-1705 #)129,00B320-330150729-0330-1105 #)157,00B320-330200729-0330-1205 #)204,00B320-330250729-0330-1305 #)231,00B320-330300729-0330-1405 #)309,00B320-330400729-0330-1505 #)386,00B320-330500729-0330-1605 #)465,00B320-330600729-0330-1705 #)160,00B325-335200729-0335-1205 #)209,00B325-335250729-0335-1305 #)238,00B325-335300729-0335-1405 #)318,00B325-335400729-0335-1505 #)398,00B325-335500729-0335-1605 #)477,00B325-335600729-0335-1705 #)159,00B334-344200729-0344-1205 #)209,00B334-344250729-0344-1305 #)237,00B334-344300729-0344-1405 #)315,00B334-344400729-0344-1505 #)397,00B334-344500729-0344-1605 #)474,00B334-344600729-0344-1705 #)160,00B340-350200729-0350-1205 #)212,00B340-350250729-0350-1305 #)238,00B340-350300729-0350-1405 #)318,00B340-350400729-0350-1505 #)400,00B340-350500729-0350-1605 #)477,00B340-350600729-0350-1705 #)163,00B350-360200729-0360-1205 #)215,00B350-360250729-0360-1305 #)241,00B350-360300729-0360-1405 #)321,00B350-360400729-0360-1505 #)403,00B350-360500729-0360-1605 #)481,00B350-360600729-0360-1705 #)
Repair clam
ps
Products for water according to ALL STD.
ALL STD
.
83 2007-07-10 10:47 CET
Gross priceEUR
Deliv.-code
DN mm
AVK ref. nos.Type
Series 729/18
Internal clamp200 mm widthNBR sealingsDN 600-2000
02
1.467,00B600729-0600-18021.604,00B700729-0700-18021.742,00B800729-0800-18021.879,00B900729-0900-18022.017,00B1000729-1000-18022.223,00B1100729-1100-18022.452,00B1200729-1200-18022.681,00B1300729-1300-18022.911,00B1400729-1400-18023.140,00B1500729-1500-18023.346,00B1600729-1600-18023.575,00B1700729-1700-18023.804,00B1800729-1800-18024.034,00B1900729-1900-18024.263,00B2000729-2000-1802
Gross priceEUR
Deliv.-code
DN mm
AVK ref. nos.Type
Series 729/19
Internal clamp400 mm widthNBR sealingsDN 600-2000
02
1.765,00B600729-0600-19021.925,00B700729-0700-19022.086,00B800729-0800-19022.246,00B900729-0900-19022.429,00B1000729-1000-19022.659,00B1100729-1100-19022.934,00B1200729-1200-19023.209,00B1300729-1300-19023.484,00B1400729-1400-19023.759,00B1500729-1500-19024.011,00B1600729-1600-19024.286,00B1700729-1700-19024.561,00B1800729-1800-19024.836,00B1900729-1900-19025.042,00B2000729-2000-1902
Gross priceEUR
Deliv.-code
Tmm
Lmm
AVK ref. nos.Type
Series 729/2
Repair clamptype FSANBR sealings
Note:# AISI 304, 1"
BSP thread,Available onrequest:1/2"-3"BSP thread
10510
108,00B48-52100729-2052-100510 #)123,00B48-52150729-2052-110510 #)135,00B48-52200729-2052-120510 #)166,00B48-52250729-2052-130510 #)178,00B48-52300729-2052-140510 #)223,00B48-52400729-2052-150510 #)108,00B54-58100729-2058-100510 #)135,00B54-58150729-2058-110510 #)123,00B54-58200729-2058-120510 #)167,00B54-58250729-2058-130510 #)178,00B54-58300729-2058-140510 #)225,00B54-58400729-2058-150510 #)109,00B60-67100729-2067-100510 #)124,00B60-67150729-2067-110510 #)135,00B60-67200729-2067-120510 #)167,00B60-67250729-2067-130510 #)178,00B60-67300729-2067-140510 #)225,00B60-67400729-2067-150510 #)275,00B60-67500729-2067-160510 #)109,00B67-74100729-2074-100510 #)126,00B67-74150729-2074-110510 #)136,00B67-74200729-2074-120510 #)171,00B67-74250729-2074-130510 #)182,00B67-74300729-2074-140510 #)230,00B67-74400729-2074-150510 #)278,00B67-74500729-2074-160510 #)109,00B70-77100729-2077-100510 #)126,00B70-77150729-2077-110510 #)138,00B70-77200729-2077-120510 #)171,00B70-77250729-2077-130510 #)182,00B70-77300729-2077-140510 #)227,00B70-77400729-2077-150510 #)280,00B70-77500729-2077-160510 #)109,00B73-80100729-2080-100510 #)
Repair clam
ps
Products for water according to ALL STD.
ALL STD
.
84 2007-07-10 10:47 CET
Gross priceEUR
Deliv.-code
Tmm
Lmm
AVK ref. nos.Type
Series 729/2
Repair clamptype FSANBR sealings
Note:# AISI 304, 1"
BSP thread,Available onrequest:1/2"-3"BSP thread
10510
126,00B73-80150729-2080-110510 #)138,00B73-80200729-2080-120510 #)171,00B73-80250729-2080-130510 #)184,00B73-80300729-2080-140510 #)228,00B73-80400729-2080-150510 #)282,00B73-80500729-2080-160510 #)111,00B76-83100729-2083-100510 #)127,00B76-83150729-2083-110510 #)139,00B76-83200729-2083-120510 #)172,00B76-83250729-2083-130510 #)184,00B76-83300729-2083-140510 #)228,00B76-83400729-2083-150510 #)284,00B76-83500729-2083-160510 #)111,00B82-89100729-2089-100510 #)127,00B82-89150729-2089-110510 #)139,00B82-89200729-2089-120510 #)172,00B82-89250729-2089-130510 #)185,00B82-89300729-2089-140510 #)231,00B82-89400729-2089-150510 #)285,00B82-89500729-2089-160510 #)111,00B87-94100729-2094-100510 #)127,00B87-94150729-2094-110510 #)141,00B87-94200729-2094-120510 #)173,00B87-94250729-2094-130510 #)187,00B87-94300729-2094-140510 #)231,00B87-94400729-2094-150510 #)286,00B87-94500729-2094-160510 #)111,00B91-98100729-2098-100510 #)127,00B91-98150729-2098-110510 #)141,00B89-98200729-2098-120510 #)173,00B91-98250729-2098-130510 #)187,00B91-98300729-2098-140510 #)233,00B91-98400729-2098-150510 #)289,00B91-98500729-2098-160510 #)111,00B95-102100729-2102-100510 #)129,00B95-102150729-2102-110510 #)144,00B95-102200729-2102-120510 #)179,00B95-102250729-2102-130510 #)191,00B95-102300729-2102-140510 #)237,00B95-102400729-2102-150510 #)292,00B95-102500729-2102-160510 #)111,00B98-108100729-2108-100510 #)127,00B98-108150729-2108-110510 #)142,00B98-108200729-2108-120510 #)176,00B98-108250729-2108-130510 #)188,00B98-108300729-2108-140510 #)234,00B98-108400729-2108-150510 #)295,00B98-108500729-2108-160510 #)112,00B88-110100729-2112-100510 #)129,00B102-112150729-2112-110510 #)145,00B102-112200729-2112-120510 #)179,00B102-112250729-2112-130510 #)191,00B102-112300729-2112-140510 #)238,00B102-112400729-2112-150510 #)298,00B102-112500729-2112-160510 #)112,00B106-116100729-2116-100510 #)130,00B106-116150729-2116-110510 #)147,00B106-116200729-2116-120510 #)182,00B106-116250729-2116-130510 #)196,00B106-116300729-2116-140510 #)244,00B106-116400729-2116-150510 #)300,00B106-116500729-2116-160510 #)114,00B108-118100729-2118-100510 #)130,00B108-118150729-2118-110510 #)147,00B108-118200729-2118-120510 #)182,00B108-118250729-2118-130510 #)196,00B108-118300729-2118-140510 #)244,00B108-118400729-2118-150510 #)304,00B108-118500729-2118-160510 #)114,00B113-123100729-2123-100510 #)130,00B113-123150729-2123-110510 #)147,00B113-123200729-2123-120510 #)184,00B113-123250729-2123-130510 #)197,00B113-123300729-2123-140510 #)247,00B113-123400729-2123-150510 #)306,00B113-123500729-2123-160510 #)114,00B118-128100729-2128-100510 #)130,00B118-128150729-2128-110510 #)145,00B118-128200729-2128-120510 #)184,00B118-128250729-2128-130510 #)199,00B118-128300729-2128-140510 #)252,00B118-128400729-2128-150510 #)
Repair clam
ps
Products for water according to ALL STD.
ALL STD
.
85 2007-07-10 10:47 CET
Gross priceEUR
Deliv.-code
Tmm
Lmm
AVK ref. nos.Type
Series 729/2
Repair clamptype FSANBR sealings
Note:# AISI 304, 1"
BSP thread,Available onrequest:1/2"-3"BSP thread
10510
307,00B118-128500729-2128-160510 #)114,00B120-131100729-2131-100510 #)132,00B120-131150729-2131-110510 #)150,00B120-131200729-2131-120510 #)186,00B120-131250729-2131-130510 #)201,00B120-131300729-2131-140510 #)258,00B120-131400729-2131-150510 #)309,00B120-131500729-2131-160510 #)114,00B125-135100729-2135-100510 #)132,00B125-135150729-2135-110510 #)150,00B125-135200729-2135-120510 #)184,00B125-135250729-2135-130510 #)200,00B125-135300729-2135-140510 #)258,00B125-135400729-2135-150510 #)311,00B125-135500729-2135-160510 #)115,00B132-142100729-2142-100510 #)135,00B132-142150729-2142-110510 #)151,00B132-142200729-2142-120510 #)189,00B132-142250729-2142-130510 #)206,00B132-142300729-2142-140510 #)263,00B132-142400729-2142-150510 #)312,00B132-142500729-2142-160510 #)115,00B135-145100729-2145-100510 #)133,00B135-145150729-2145-110510 #)151,00B135-145200729-2145-120510 #)188,00B135-145250729-2145-130510 #)205,00B135-145300729-2145-140510 #)259,00B135-145400729-2145-150510 #)315,00B135-145500729-2145-160510 #)117,00B145-155100729-2155-100510 #)135,00B145-155150729-2155-110510 #)153,00B145-155200729-2155-120510 #)191,00B145-155250729-2155-130510 #)206,00B145-155300729-2155-140510 #)259,00B145-155400729-2155-150510 #)314,00B145-155500729-2155-160510 #)118,00B151-161100729-2161-100510 #)138,00B151-161150729-2161-110510 #)156,00B151-161200729-2161-120510 #)195,00B151-161250729-2161-130510 #)212,00B151-161300729-2161-140510 #)264,00B151-161400729-2161-150510 #)322,00B151-161500729-2161-160510 #)374,00B151-161600729-2161-170510 #)118,00B159-170100729-2170-100510 #)138,00B159-170150729-2170-110510 #)156,00B159-170200729-2170-120510 #)194,00B159-170250729-2170-130510 #)211,00B159-170300729-2170-140510 #)264,00B159-170400729-2170-150510 #)320,00B159-170500729-2170-160510 #)373,00B159-170600729-2170-170510 #)120,00B165-175100729-2175-100510 #)141,00B165-175150729-2175-110510 #)159,00B165-175200729-2175-120510 #)198,00B165-175250729-2175-130510 #)215,00B165-175300729-2175-140510 #)270,00B165-175400729-2175-150510 #)326,00B165-175500729-2175-160510 #)382,00B165-175600729-2175-170510 #)121,00B167-177100729-2177-100510 #)142,00B167-177150729-2177-110510 #)159,00B167-177200729-2177-120510 #)198,00B167-177250729-2177-130510 #)215,00B167-177300729-2177-140510 #)272,00B167-177400729-2177-150510 #)329,00B167-177500729-2177-160510 #)383,00B167-177600729-2177-170510 #)121,00B170-180100729-2180-100510 #)141,00B170-180150729-2180-110510 #)157,00B170-180200729-2180-120510 #)197,00B170-180250729-2180-130510 #)214,00B170-180300729-2180-140510 #)270,00B170-180400729-2180-150510 #)326,00B170-180500729-2180-160510 #)379,00B170-180600729-2180-170510 #)121,00B174-184100729-2184-100510 #)142,00B174-184150729-2184-110510 #)160,00B174-184200729-2184-120510 #)200,00B174-184250729-2184-130510 #)218,00B174-184300729-2184-140510 #)275,00B174-184400729-2184-150510 #)
Repair clam
ps
Products for water according to ALL STD.
ALL STD
.
86 2007-07-10 10:47 CET
Gross priceEUR
Deliv.-code
Tmm
Lmm
AVK ref. nos.Type
Series 729/2
Repair clamptype FSANBR sealings
Note:# AISI 304, 1"
BSP thread,Available onrequest:1/2"-3"BSP thread
10510
332,00B174-184500729-2184-160510 #)386,00B174-184600729-2184-170510 #)123,00B176-186100729-2186-100510 #)144,00B176-186150729-2186-110510 #)162,00B176-186200729-2186-120510 #)201,00B176-186250729-2186-130510 #)219,00B176-186300729-2186-140510 #)276,00B176-186400729-2186-150510 #)334,00B176-186500729-2186-160510 #)389,00B176-186600729-2186-170510 #)123,00B180-190100729-2190-100510 #)142,00B180-190150729-2190-110510 #)162,00B180-190200729-2190-120510 #)200,00B180-190250729-2190-130510 #)218,00B180-190300729-2190-140510 #)276,00B180-190400729-2190-150510 #)332,00B180-190500729-2190-160510 #)390,00B180-190600729-2190-170510 #)123,00B186-196100729-2196-100510 #)145,00B186-196150729-2196-110510 #)165,00B186-196200729-2196-120510 #)204,00B186-196250729-2196-130510 #)222,00B186-196300729-2196-140510 #)282,00B186-196400729-2196-150510 #)341,00B186-196500729-2196-160510 #)400,00B186-196600729-2196-170510 #)124,00B193-203100729-2203-100510 #)145,00B193-203150729-2203-110510 #)165,00B193-203200729-2203-120510 #)205,00B193-203250729-2203-130510 #)224,00B193-203300729-2203-140510 #)282,00B193-203400729-2203-150510 #)341,00B193-203500729-2203-160510 #)398,00B193-203600729-2203-170510 #)126,00B200-210100729-2210-100510 #)148,00B200-210150729-2210-110510 #)168,00B200-210200729-2210-120510 #)209,00B200-210250729-2210-130510 #)228,00B200-210300729-2210-140510 #)290,00B200-210400729-2210-150510 #)352,00B200-210500729-2210-160510 #)409,00B200-210600729-2210-170510 #)127,00B209-220100729-2220-100510 #)148,00B209-220150729-2220-110510 #)167,00B209-220200729-2220-120510 #)209,00B209-220250729-2220-130510 #)228,00B209-220300729-2220-140510 #)289,00B209-220400729-2220-150510 #)350,00B209-220500729-2220-160510 #)409,00B209-220600729-2220-170510 #)127,00B215-225100729-2225-100510 #)151,00B215-225150729-2225-110510 #)171,00B215-225200729-2225-120510 #)213,00B215-225250729-2225-130510 #)233,00B215-225300729-2225-140510 #)296,00B215-225400729-2225-150510 #)358,00B215-225500729-2225-160510 #)420,00B215-225600729-2225-170510 #)129,00B219-229100729-2229-100510 #)151,00B219-229150729-2229-110510 #)171,00B219-229200729-2229-120510 #)212,00B219-229250729-2229-130510 #)231,00B219-229300729-2229-140510 #)295,00B219-229400729-2229-150510 #)354,00B219-229500729-2229-160510 #)416,00B219-229600729-2229-170510 #)130,00B222-233100729-2233-100510 #)156,00B222-233150729-2233-110510 #)173,00B222-233200729-2233-120510 #)214,00B222-233250729-2233-130510 #)234,00B222-233300729-2233-140510 #)301,00B222-233400729-2233-150510 #)363,00B222-233500729-2233-160510 #)422,00B222-233600729-2233-170510 #)132,00B229-239100729-2239-100510 #)157,00B228-239150729-2239-110510 #)175,00B228-239200729-2239-120510 #)216,00B228-239250729-2239-130510 #)237,00B228-239300729-2239-140510 #)305,00B228-239400729-2239-150510 #)368,00B228-239500729-2239-160510 #)428,00B228-239600729-2239-170510 #)
Repair clam
ps
Products for water according to ALL STD.
ALL STD
.
87 2007-07-10 10:47 CET
Gross priceEUR
Deliv.-code
Tmm
Lmm
AVK ref. nos.Type
Series 729/2
Repair clamptype FSANBR sealings
Note:# AISI 304, 1"
BSP thread,Available onrequest:1/2"-3"BSP thread
10510
133,00B230-240100729-2240-100510 #)159,00B230-240150729-2240-110510 #)179,00B230-240200729-2240-120510 #)218,00B230-240250729-2240-130510 #)239,00B230-240300729-2240-140510 #)311,00B230-240400729-2240-150510 #)373,00B230-240500729-2240-160510 #)430,00B230-240600729-2240-170510 #)135,00B237-247100729-2247-100510 #)159,00B237-247150729-2247-110510 #)179,00B237-247200729-2247-120510 #)218,00B237-247250729-2247-130510 #)238,00B237-247300729-2247-140510 #)311,00B237-247400729-2247-150510 #)373,00B237-247500729-2247-160510 #)428,00B237-247600729-2247-170510 #)136,00B239-249100729-2249-100510 #)162,00B239-249150729-2249-110510 #)185,00B239-249200729-2249-120510 #)224,00B239-249250729-2249-130510 #)245,00B239-249300729-2249-140510 #)322,00B239-249400729-2249-150510 #)383,00B239-249500729-2249-160510 #)439,00B239-249600729-2249-170510 #)138,00B243-254100729-2254-100510 #)162,00B243-254150729-2254-110510 #)185,00B243-254200729-2254-120510 #)224,00B243-254250729-2254-130510 #)247,00B243-254300729-2254-140510 #)355,00B243-254400729-2254-150510 #)382,00B243-254500729-2254-160510 #)440,00B243-254600729-2254-170510 #)141,00B250-260100729-2260-100510 #)169,00B250-260150729-2260-110510 #)191,00B250-260200729-2260-120510 #)236,00B250-260250729-2260-130510 #)257,00B250-260300729-2260-140510 #)329,00B250-260400729-2260-150510 #)394,00B250-260500729-2260-160510 #)454,00B250-260600729-2260-170510 #)141,00B252-263100729-2263-100510 #)167,00B252-263150729-2263-110510 #)190,00B252-263200729-2263-120510 #)234,00B252-263250729-2263-130510 #)255,00B252-263300729-2263-140510 #)329,00B252-263400729-2263-150510 #)392,00B252-262500729-2263-160510 #)455,00B252-263600729-2263-170510 #)142,00B261-271100729-2271-100510 #)171,00B261-271150729-2271-110510 #)194,00B261-271200729-2271-120510 #)239,00B261-271250729-2271-130510 #)261,00B261-271300729-2271-140510 #)338,00B261-271400729-2271-150510 #)403,00B261-271500729-2271-160510 #)469,00B261-271600729-2271-170510 #)144,00B266-276100729-2276-100510 #)171,00B266-276150729-2276-110510 #)194,00B266-276200729-2276-120510 #)237,00B266-276250729-2276-130510 #)259,00B266-276300729-2276-140510 #)336,00B266-276400729-2276-150510 #)402,00B266-276500729-2276-160510 #)470,00B266-276600729-2276-170510 #)144,00B270-280100729-2280-100510 #)174,00B270-280150729-2280-110510 #)200,00B270-280200729-2280-120510 #)242,00B270-280250729-2280-130510 #)269,00B270-280300729-2280-140510 #)347,00B270-280400729-2280-150510 #)412,00B270-280500729-2280-160510 #)484,00B270-280600729-2280-170510 #)145,00B273-283100729-2283-100510 #)173,00B273-283150729-2283-110510 #)199,00B273-283200729-2283-120510 #)241,00B273-283250729-2283-130510 #)265,00B273-283300729-2283-140510 #)344,00B273-283400729-2283-150510 #)412,00B273-283500729-2283-160510 #)484,00B273-283600729-2283-170510 #)148,00B280-291100729-2291-100510 #)176,00B281-291150729-2291-110510 #)
Repair clam
ps
Products for water according to ALL STD.
ALL STD
.
88 2007-07-10 10:47 CET
Gross priceEUR
Deliv.-code
Tmm
Lmm
AVK ref. nos.Type
Series 729/2
Repair clamptype FSANBR sealings
Note:# AISI 304, 1"
BSP thread,Available onrequest:1/2"-3"BSP thread
10510
202,00B280-291200729-2291-120510 #)247,00B280-291250729-2291-130510 #)273,00B280-291300729-2291-140510 #)348,00B280-291400729-2291-150510 #)418,00B280-291500729-2291-160510 #)492,00B280-291600729-2291-170510 #)148,00B290-300100729-2300-100510 #)178,00B290-300150729-2300-110510 #)203,00B290-300200729-2300-120510 #)250,00B290-300250729-2300-130510 #)277,00B290-300300729-2300-140510 #)352,00B290-300400729-2300-150510 #)422,00B290-300500729-2300-160510 #)499,00B290-300600729-2300-170510 #)181,00B300-310150729-2310-110510 #)209,00B300-310200729-2310-120510 #)257,00B300-310250729-2310-130510 #)284,00B300-310300729-2310-140510 #)361,00B300-310400729-2310-150510 #)433,00B300-310500729-2310-160510 #)514,00B300-310600729-2310-170510 #)181,00B310-320150729-2320-110510 #)209,00B310-320200729-2320-120510 #)256,00B310-320250729-2320-130510 #)283,00B310-320300729-2320-140510 #)358,00B310-320400729-2320-150510 #)431,00B310-320500729-2320-160510 #)511,00B310-320600729-2320-170510 #)185,00B315-325150729-2325-110510 #)213,00B315-325200729-2325-120510 #)261,00B315-325250729-2325-130510 #)289,00B315-325300729-2325-140510 #)367,00B315-325400729-2325-150510 #)445,00B315-325500729-2325-160510 #)522,00B315-325600729-2325-170510 #)184,00B320-330150729-2330-110510 #)212,00B320-330200729-2330-120510 #)259,00B320-330250729-2330-130510 #)286,00B320-330300729-2330-140510 #)364,00B320-330400729-2330-150510 #)441,00B320-330500729-2330-160510 #)520,00B320-330600729-2330-170510 #)215,00B325-335200729-2335-120510 #)264,00B325-335250729-2335-130510 #)293,00B325-335300729-2335-140510 #)373,00B325-335400729-2335-150510 #)453,00B325-335500729-2335-160510 #)532,00B325-335600729-2335-170510 #)214,00B334-344200729-2344-120510 #)264,00B334-344250729-2344-130510 #)292,00B334-344300729-2344-140510 #)370,00B334-344400729-2344-150510 #)452,00B334-344500729-2344-160510 #)529,00B334-344600729-2344-170510 #)215,00B340-350200729-2350-120510 #)267,00B340-350250729-2350-130510 #)293,00B340-350300729-2350-140510 #)373,00B340-350400729-2350-150510 #)455,00B340-350500729-2350-160510 #)532,00B340-350600729-2350-170510 #)218,00B350-360200729-2360-120510 #)270,00B350-360250729-2360-130510 #)296,00B350-360300729-2360-140510 #)376,00B350-360400729-2360-150510 #)458,00B350-360500729-2360-160510 #)536,00B350-360600729-2360-170510 #)
Repair clam
ps
Products for water according to ALL STD.
ALL STD
.
89 2007-07-10 10:47 CET
Gross priceEUR
Deliv.-code
Tmm
Lmm
AVK ref. nos.Type
Series 729/20
Double bandrepair clamptype FS 20NBR sealings
Note:# AISI 304
05
A88-110200729-0110-2205 #)215,00A88-110250729-0110-2305 #)237,00A88-110300729-0110-2405 #)321,00B88-110400729-0110-2505 #)405,00B88-110500729-0110-2605 #)490,00B88-110600729-0110-2705 #)157,00B100-120200729-0120-2205 #)221,00B100-120250729-0120-2305 #)244,00B100-120300729-0120-2405 #)328,00B100-120400729-0120-2505 #)416,00B100-120500729-0120-2605 #)501,00B100-120600729-0120-2705 #)156,00A108-128200729-0128-2205 #)219,00A108-128250729-0128-2305 #)240,00A108-128300729-0128-2405 #)326,00B108-128400729-0128-2505 #)410,00B108-128500729-0128-2605 #)494,00B108-128600729-0128-2705 #)224,00B114-134250729-0134-2305 #)247,00B114-134300729-0134-2405 #)334,00B114-134400729-0134-2505 #)422,00B114-134500729-0134-2605 #)507,00B114-134600729-0134-2705 #)164,00B120-140200729-0140-2205 #)226,00B120-140250729-0140-2305 #)250,00B120-140300729-0140-2405 #)337,00B120-140400729-0140-2505 #)426,00B120-140500729-0140-2605 #)515,00B120-140600729-0140-2705 #)163,00B130-150200729-0150-2205 #)224,00B130-150250729-0150-2305 #)247,00B130-150300729-0150-2405 #)333,00B130-150400729-0150-2505 #)420,00B130-150500729-0150-2605 #)508,00B130-150600729-0150-2705 #)169,00B135-155200729-0155-2205 #)227,00B135-155250729-0155-2305 #)251,00B135-155300729-0155-2405 #)340,00B135-155400729-0155-2505 #)429,00B135-155500729-0155-2605 #)518,00B135-155600729-0155-2705 #)225,00A140-160250729-0160-2305 #)249,00A140-160300729-0160-2405 #)336,00B140-160400729-0160-2505 #)425,00B140-160500729-0160-2605 #)546,00B140-160600729-0160-2705 #)229,00A159-180250729-0180-2305 #)255,00A159-180300729-0180-2405 #)343,00A159-180400729-0180-2505 #)434,00B159-180500729-0180-2605 #)523,00B159-180600729-0180-2705 #)172,00A165-185200729-0185-2205 #)232,00B165-185250729-0185-2305 #)345,00B165-185400729-0185-2505 #)435,00B165-185500729-0185-2605 #)524,00B165-185600729-0185-2705 #)175,00B168-189200729-0189-2205 #)240,00B168-189250729-0189-2305 #)264,00B168-189300729-0189-2405 #)351,00B168-189400729-0189-2505 #)443,00B168-189500729-0189-2605 #)535,00B168-189600729-0189-2705 #)176,00B170-190200729-0190-2205 #)241,00B170-190250729-0190-2305 #)267,00B170-190300729-0190-2405 #)352,00B170-190400729-0190-2505 #)444,00B170-190500729-0190-2605 #)536,00B170-190600729-0190-2705 #)178,00B175-196200729-0196-2205 #)244,00B176-196250729-0196-2305 #)270,00B175-196300729-0196-2405 #)355,00B175-196400729-0196-2505 #)449,00B175-196500729-0196-2605 #)541,00B175-196600729-0196-2705 #)176,00B190-210200729-0210-2205 #)243,00B190-210250729-0210-2305 #)267,00B190-210300729-0210-2405 #)352,00B190-210400729-0210-2505 #)444,00B190-210500729-0210-2605 #)536,00B190-210600729-0210-2705 #)181,00B195-217200729-0217-2205 #)249,00B195-217250729-0217-2305 #)
Repair clam
ps
Products for water according to ALL STD.
ALL STD
.
90 2007-07-10 10:47 CET
Gross priceEUR
Deliv.-code
Tmm
Lmm
AVK ref. nos.Type
Series 729/20
Double bandrepair clamptype FS 20NBR sealings
Note:# AISI 304
05
274,00B195-217300729-0217-2405 #)360,00B195-217400729-0217-2505 #)458,00B195-217500729-0217-2605 #)559,00B195-217600729-0217-2705 #)255,00B210-230250729-0230-2305 #)279,00B210-230300729-0230-2405 #)367,00B210-230400729-0230-2505 #)467,00B210-230500729-0230-2605 #)580,00B210-230600729-0230-2705 #)183,00B216-238200729-0238-2205 #)
A216-238250729-0238-2305 #)277,00A216-238300729-0238-2405 #)364,00A216-238400729-0238-2505 #)469,00B216-238500729-0238-2605 #)574,00B216-238600729-0238-2705 #)190,00B225-246200729-0246-2205 #)262,00B225-246250729-0246-2305 #)285,00B225-246300729-0246-2405 #)381,00B225-246400729-0246-2505 #)486,00B225-246500729-0246-2605 #)586,00B225-246600729-0246-2705 #)191,00B230-250200729-0250-2205 #)265,00B230-250250729-0250-2305 #)288,00B230-250300729-0250-2405 #)387,00B230-250400729-0250-2505 #)492,00B230-250500729-0250-2605 #)593,00B230-250600729-0250-2705 #)189,00B240-260200729-0260-2205 #)264,00B240-260250729-0260-2305 #)287,00B240-260300729-0260-2405 #)388,00B240-260400729-0260-2505 #)490,00B240-260500729-0260-2605 #)589,00B240-260600729-0260-2705 #)207,00B250-270200729-0270-2205 #)277,00B250-270250729-0270-2305 #)303,00B250-270300729-0270-2405 #)407,00B250-270400729-0270-2505 #)505,00B250-270500729-0270-2605 #)614,00B250-270600729-0270-2705 #)218,00B269-289200729-0289-2205 #)293,00B269-289250729-0289-2305 #)323,00B269-289300729-0289-2405 #)429,00A269-289400729-0289-2505 #)520,00B269-289500729-0289-2605 #)640,00B269-289600729-0289-2705 #)223,00B273-293200729-0293-2205 #)301,00B273-293250729-0293-2305 #)331,00B273-293300729-0293-2405 #)
A273-293400729-0293-2505 #)544,00B273-293500729-0293-2605 #)652,00B273-293600729-0293-2705 #)759,00B273-293800729-0293-2905 #)227,00B282-302200729-0302-2205 #)304,00B282-302250729-0302-2305 #)336,00B282-302300729-0302-2405 #)446,00B282-302400729-0302-2505 #)554,00B282-302500729-0302-2605 #)664,00B282-302600729-0302-2705 #)774,00B282-302800729-0302-2905 #)230,00B295-315200729-0315-2205 #)307,00B295-315250729-0315-2305 #)342,00B295-315300729-0315-2405 #)452,00B295-315400729-0315-2505 #)563,00B295-315500729-0315-2605 #)675,00B295-315600729-0315-2705 #)784,00B295-315800729-0315-2905 #)232,00B315-335200729-0335-2205 #)309,00B315-335250729-0335-2305 #)343,00A315-335300729-0335-2405 #)
A315-335400729-0335-2505 #)567,00B315-335500729-0335-2605 #)678,00B315-335600729-0335-2705 #)791,00B315-335800729-0335-2905 #)234,00B322-344200729-0344-2205 #)311,00B322-344250729-0344-2305 #)347,00B322-344300729-0344-2405 #)457,00B322-344400729-0344-2505 #)573,00B322-344500729-0344-2605 #)795,00B322-344800729-0344-2905 #)237,00B337-358200729-0358-2205 #)315,00B337-358250729-0358-2305 #)351,00B337-358300729-0358-2405 #)
Repair clam
ps
Products for water according to ALL STD.
ALL STD
.
91 2007-07-10 10:47 CET
Gross priceEUR
Deliv.-code
Tmm
Lmm
AVK ref. nos.Type
Series 729/20
Double bandrepair clamptype FS 20NBR sealings
Note:# AISI 304
05
579,00B337-358500729-0358-2605 #)682,00B322-344600729-0358-2705 #)807,00B337-358800729-0358-2905 #)244,00B347-367200729-0367-2205 #)324,00B347-367250729-0367-2305 #)361,00B347-367300729-0367-2405 #)479,00B347-367400729-0367-2505 #)596,00B347-367500729-0367-2605 #)711,00B347-367600729-0367-2705 #)831,00B347-367800729-0367-2905 #)244,00B365-385200729-0385-2205 #)324,00B365-385250729-0385-2305 #)361,00B365-385300729-0385-2405 #)480,00B365-385400729-0385-2505 #)596,00B365-385500729-0385-2605 #)715,00B365-385600729-0385-2705 #)832,00B365-385800729-0385-2905 #)247,00B382-402200729-0402-2205 #)367,00B382-402300729-0402-2405 #)490,00B382-402400729-0402-2505 #)607,00B382-402500729-0402-2605 #)725,00B382-402600729-0402-2705 #)845,00B382-402800729-0402-2905 #)252,00B396-420200729-0420-2205 #)329,00B382-402250729-0420-2305 #)373,00B396-420300729-0420-2405 #)494,00B396-420400729-0420-2505 #)616,00B396-420500729-0420-2605 #)737,00B396-420600729-0420-2705 #)859,00B396-420800729-0420-2905 #)280,00B410-430200729-0430-2205 #)369,00B410-430250729-0430-2305 #)417,00B410-430300729-0430-2405 #)551,00B410-430400729-0430-2505 #)687,00B410-430500729-0430-2605 #)821,00B410-430600729-0430-2705 #)961,00B410-430800729-0430-2905 #)278,00B420-440200729-0440-2205 #)549,00B420-440400729-0440-2505 #)684,00B420-440500729-0440-2605 #)818,00B420-440600729-0440-2705 #)953,00B420-440800729-0440-2905 #)288,00B435-455200729-0455-2205 #)380,00B435-455250729-0455-2305 #)428,00B435-455300729-0455-2405 #)571,00B435-455400729-0455-2505 #)708,00B435-455500729-0455-2605 #)846,00B435-455600729-0455-2705 #)986,00B435-455800729-0455-2905 #)292,00B450-470200729-0470-2205 #)386,00B450-470250729-0470-2305 #)435,00B450-470300729-0470-2405 #)577,00B450-470400729-0470-2505 #)718,00B450-470500729-0470-2605 #)861,00B450-470600729-0470-2705 #)
1.003,00B450-470800729-0470-2905 #)297,00B468-488200729-0488-2205 #)392,00B468-488250729-0488-2305 #)441,00B468-488300729-0488-2405 #)730,00B468-488500729-0488-2605 #)875,00B468-488600729-0488-2705 #)
1.019,00B468-488800729-0488-2905 #)304,00B490-510200729-0510-2205 #)399,00B490-510250729-0510-2305 #)452,00B490-510300729-0510-2405 #)599,00B490-510400729-0510-2505 #)894,00B490-510600729-0510-2705 #)
1.042,00B490-510800729-0510-2905 #)310,00B510-530200729-0530-2205 #)407,00B510-530250729-0530-2305 #)610,00B510-530400729-0530-2505 #)761,00B510-530500729-0530-2605 #)911,00B510-530600729-0530-2705 #)
1.062,00B510-530800729-0530-2905 #)313,00B520-540200729-0540-2205 #)410,00B520-540250729-0540-2305 #)464,00B520-540300729-0540-2405 #)616,00B520-540400729-0540-2505 #)768,00B520-540500729-0540-2605 #)920,00B520-540600729-0540-2705 #)
1.072,00B520-540800729-0540-2905 #)321,00B550-570200729-0570-2205 #)
Repair clam
ps
Products for water according to ALL STD.
ALL STD
.
92 2007-07-10 10:47 CET
Gross priceEUR
Deliv.-code
Tmm
Lmm
AVK ref. nos.Type
Series 729/20
Double bandrepair clamptype FS 20NBR sealings
Note:# AISI 304
05
420,00B550-570250729-0570-2305 #)477,00B550-570300729-0570-2405 #)632,00B550-570400729-0570-2505 #)789,00B550-570500729-0570-2605 #)946,00B550-570600729-0570-2705 #)
1.101,00B550-570800729-0570-2905 #)327,00B570-590200729-0590-2205 #)429,00B570-590250729-0590-2305 #)486,00B570-590300729-0590-2405 #)646,00B570-590400729-0590-2505 #)804,00B570-590500729-0590-2605 #)964,00B570-590600729-0590-2705 #)
1.123,00B570-590800729-0590-2905 #)333,00B590-610200729-0610-2205 #)435,00B590-610250729-0610-2305 #)496,00B590-610300729-0610-2405 #)657,00B590-610400729-0610-2505 #)819,00B590-610500729-0610-2605 #)980,00B590-610600729-0610-2705 #)
1.143,00B590-610800729-0610-2905 #)345,00B630-650200729-0650-2205 #)450,00B630-650250729-0650-2305 #)679,00B630-650400729-0650-2505 #)848,00B630-650500729-0650-2605 #)
1.015,00B630-650600729-0650-2705 #)1.184,00B630-650800729-0650-2905 #)
Gross priceEUR
Deliv.-code
DN mm
AVK ref. nos.Type
Series 729/28
External clamp200 mm widthNBR sealingsDN 600-2000
02
2.269,00B600729-0600-28022.475,00B700729-0700-28022.681,00B800729-0800-28022.888,00B900729-0900-28023.094,00B1000729-1000-28023.438,00B1100729-1100-28023.782,00B1200729-1200-28024.125,00B1300729-1300-28024.469,00B1400729-1400-28024.813,00B1500729-1500-28025.157,00B1600729-1600-28025.500,00B1700729-1700-28025.844,00B1800729-1800-28026.188,00B1900729-1900-28026.532,00B2000729-2000-2802
Gross priceEUR
Deliv.-code
DN mm
AVK ref. nos.Type
Series 729/29
External clamp400 mm widthNBR sealingsDN 600-2000
02
3.736,00B600729-0600-29024.079,00B700729-0700-29024.446,00B800729-0800-29024.790,00B900729-0900-29025.111,00B1000729-1000-29025.684,00B1100729-1100-29026.257,00B1200729-1200-29026.830,00B1300729-1300-29027.403,00B1400729-1400-29027.976,00B1500729-1500-29028.549,00B1600729-1600-29029.122,00B1700729-1700-29029.672,00B1800729-1800-2902
10.222,00B1900729-1900-290210.772,00B2000729-2000-2902
Repair clam
ps
Products for water according to ALL STD.
ALL STD
.
93 2007-07-10 10:47 CET
Gross priceEUR
Deliv.-code
Tmm
Lmm
AVK ref. nos.Type
Series 729/3
Double/Tripleband repairclamp type FSTNBR sealings
Note:# AISI 304, DN
50 flange
20540
700,00B88-110300729-3110-240540 #)798,00B88-110400729-3110-250540 #)894,00B88-110500729-3110-260540 #)989,00B88-110600729-3110-270540 #)703,00B100-120300729-3120-240540 #)803,00B100-120400729-3120-250540 #)899,00B100-120500729-3120-260540 #)995,00B100-120600729-3120-270540 #)705,00B108-128300729-3128-240540 #)804,00B108-128400729-3128-250540 #)901,00B108-128500729-3128-260540 #)999,00B108-128600729-3128-270540 #)708,00B114-134300729-3134-240540 #)808,00B114-134400729-3134-250540 #)907,00B114-134500729-3134-260540 #)
1.005,00B114-134600729-3134-270540 #)712,00B120-140300729-3140-240540 #)814,00B120-140400729-3140-250540 #)914,00B120-140500729-3140-260540 #)
1.015,00B120-140600729-3140-270540 #)713,00B130-150300729-3150-240540 #)816,00B130-150400729-3150-250540 #)917,00B130-150500729-3150-260540 #)
1.017,00B130-150600729-3150-270540 #)715,00B135-155300729-3155-240540 #)818,00B135-155400729-3155-250540 #)919,00B135-155500729-3155-260540 #)
1.018,00B135-155600729-3155-270540 #)718,00B140-160300729-3160-240540 #)821,00B140-160400729-3160-250540 #)924,00B140-160500729-3160-260540 #)
1.025,00B140-160600729-3160-270540 #)725,00B159-180300729-3180-240540 #)833,00B159-180400729-3180-250540 #)937,00B159-180500729-3180-260540 #)
1.050,00B159-180600729-3180-270540 #)728,00B165-185300729-3185-240540 #)836,00B165-185400729-3185-250540 #)940,00B165-185500729-3185-260540 #)
1.047,00B165-185600729-3185-270540 #)730,00B168-189300729-3189-240540 #)838,00B168-189400729-3189-250540 #)942,00B168-189500729-3189-260540 #)
1.048,00B168-189600729-3189-270540 #)730,00B170-190300729-3190-240540 #)838,00B170-190400729-3190-250540 #)944,00B170-190500729-3190-260540 #)
1.050,00B170-190600729-3190-270540 #)735,00B175-196300729-3196-240540 #)843,00B175-196400729-3196-250540 #)950,00B175-196500729-3196-260540 #)
1.057,00B175-196600729-3196-270540 #)738,00B190-210300729-3210-240540 #)849,00B190-210400729-3210-250540 #)957,00B190-210500729-3210-260540 #)
1.065,00B190-210600729-3210-270540 #)851,00B195-217400729-3217-250540 #)959,00B195-217500729-3217-260540 #)
1.068,00B195-217600729-3217-270540 #)862,00B210-230400729-3230-250540 #)974,00B210-230500729-3230-260540 #)
1.085,00B210-230600729-3230-270540 #)866,00B216-238400729-3238-250540 #)979,00B216-238500729-3238-260540 #)
1.091,00B216-238600729-3238-270540 #)869,00B225-246400729-3246-250540 #)982,00B225-246500729-3246-260540 #)
1.093,00B225-246600729-3246-270540 #)881,00B240-260400729-3260-250540 #)997,00B240-260500729-3260-260540 #)
1.113,00B240-260600729-3260-270540 #)884,00B250-270400729-3270-250540 #)
1.000,00B250-270500729-3270-260540 #)1.118,00B250-270600729-3270-270540 #)
917,00B269-289400729-3289-250540 #)1.037,00B269-289500729-3289-260540 #)1.154,00B269-289600729-3289-270540 #)
949,00B273-293400729-3293-250540 #)1.075,00B273-293500729-3293-260540 #)1.203,00B273-293600729-3293-270540 #)
970,00B273-293400729-3302-250540 #)1.068,00B282-302500729-3302-260540 #)
Repair clam
ps
Products for water according to ALL STD.
ALL STD
.
94 2007-07-10 10:47 CET
Gross priceEUR
Deliv.-code
Tmm
Lmm
AVK ref. nos.Type
Series 729/3
Double/Tripleband repairclamp type FSTNBR sealings
Note:# AISI 304, DN
50 flange
20540
1.234,00B282-302600729-3302-270540 #)980,00B295-315400729-3315-250540 #)
1.115,00B295-315500729-3315-260540 #)1.247,00B295-315600729-3315-270540 #)
995,00B315-335400729-3335-250540 #)1.133,00B315-335500729-3335-260540 #)1.269,00B315-335600729-3335-270540 #)1.000,00B322-344400729-3344-250540 #)1.140,00B322-344500729-3344-260540 #)1.279,00B322-344600729-3344-270540 #)1.009,00B337-358400729-3358-250540 #)1.149,00B337-358500729-3358-260540 #)1.289,00B337-358600729-3358-270540 #)1.146,00B347-367500729-3367-260540 #)1.289,00B347-367600729-3367-270540 #)1.587,00B347-367800729-3367-290540 #)1.179,00B365-385500729-3385-260540 #)1.325,00B365-385600729-3385-270540 #)1.622,00B365-385800729-3385-290540 #)1.191,00B382-402500729-3402-260540 #)1.340,00B382-402600729-3402-270540 #)1.640,00B382-402800729-3402-290540 #)1.203,00B396-420500729-3420-260540 #)1.353,00B396-420600729-3420-270540 #)1.659,00B396-420800729-3420-290540 #)1.216,00B410-430500729-3430-260540 #)1.370,00B410-430600729-3430-270540 #)1.680,00B410-430800729-3430-290540 #)1.222,00B420-440500729-3440-260540 #)1.378,00B420-440600729-3440-270540 #)1.692,00B420-440800729-3440-290540 #)1.234,00B435-455500729-3455-260540 #)1.392,00B435-455600729-3455-270540 #)1.710,00B435-455800729-3455-290540 #)1.251,00B450-470500729-3470-260540 #)1.413,00B450-470600729-3470-270540 #)1.737,00B450-470800729-3470-290540 #)1.262,00B468-488500729-3488-260540 #)1.426,00B468-488600729-3488-270540 #)1.755,00B468-488800729-3488-290540 #)1.285,00B485-505500729-3505-260540 #)1.453,00B485-505600729-3505-270540 #)1.791,00B485-505800729-3505-290540 #)1.297,00B500-520500729-3520-260540 #)1.468,00B500-520600729-3520-270540 #)1.810,00B500-520800729-3520-290540 #)1.314,00B516-536500729-3536-260540 #)1.488,00B516-536600729-3536-270540 #)1.838,00B516-536800729-3536-290540 #)1.325,00B532-552500729-3552-260540 #)1.501,00B532-552600729-3552-270540 #)1.856,00B532-552800729-3552-290540 #)
Gross priceEUR
Deliv.-code
Tmm
Lmm
AVK ref. nos.Type
Series 729/3
Double/Tripleband repairclamp type FSTNBR sealings
Note:# AISI 304, DN
65 flange
20543
730,00B88-110300729-3110-240543 #)828,00B88-110400729-3110-250543 #)924,00B88-110500729-3110-260543 #)
1.020,00B88-110600729-3110-270543 #)733,00B100-120300729-3120-240543 #)833,00B100-120400729-3120-250543 #)929,00B100-120500729-3120-260543 #)
1.025,00B100-120600729-3120-270543 #)735,00B108-128300729-3128-240543 #)834,00B108-128400729-3128-250543 #)932,00B108-128500729-3128-260543 #)
1.028,00B108-128600729-3128-270543 #)738,00B114-134300729-3134-240543 #)839,00B114-134400729-3134-250543 #)937,00B114-134500729-3134-260543 #)
1.035,00B114-134600729-3134-270543 #)741,00B120-140300729-3140-240543 #)844,00B120-140400729-3140-250543 #)944,00B120-140500729-3140-260543 #)
1.045,00B120-140600729-3140-270543 #)743,00B130-150300729-3150-240543 #)
Repair clam
ps
Products for water according to ALL STD.
ALL STD
.
95 2007-07-10 10:47 CET
Gross priceEUR
Deliv.-code
Tmm
Lmm
AVK ref. nos.Type
Series 729/3
Double/Tripleband repairclamp type FSTNBR sealings
Note:# AISI 304, DN
65 flange
20543
846,00B130-150400729-3150-250543 #)947,00B130-150500729-3150-260543 #)
1.047,00B130-150600729-3150-270543 #)745,00B135-155300729-3155-240543 #)848,00B135-155400729-3155-250543 #)949,00B135-155500729-3155-260543 #)
1.048,00B135-155600729-3155-270543 #)748,00B140-160300729-3160-240543 #)851,00B140-160400729-3160-250543 #)954,00B140-160500729-3160-260543 #)
1.055,00B140-160600729-3160-270543 #)755,00B159-180300729-3180-240543 #)862,00B159-180400729-3180-250543 #)967,00B159-180500729-3180-260543 #)
1.071,00B159-180600729-3180-270543 #)758,00B165-185300729-3185-240543 #)866,00B165-185400729-3185-250543 #)970,00B165-185500729-3185-260543 #)
1.076,00B165-185600729-3185-270543 #)760,00B168-189300729-3189-240543 #)868,00B168-189400729-3189-250543 #)972,00B168-189500729-3189-260543 #)
1.078,00B168-189600729-3189-270543 #)761,00B170-190300729-3190-240543 #)868,00B170-190400729-3190-250543 #)974,00B170-190500729-3190-260543 #)
1.078,00B170-190600729-3190-270543 #)763,00B175-196300729-3196-240543 #)872,00B175-196400729-3196-250543 #)980,00B175-196500729-3196-260543 #)
1.086,00B175-196600729-3196-270543 #)768,00B190-210300729-3210-240543 #)877,00B190-210400729-3210-250543 #)985,00B190-210500729-3210-260543 #)
1.095,00B190-210600729-3210-270543 #)881,00B195-217400729-3217-250543 #)989,00B195-217500729-3217-260543 #)
1.098,00B195-217600729-3217-270543 #)892,00B210-230400729-3230-250543 #)
1.003,00B210-230500729-3230-260543 #)1.115,00B210-230600729-3230-270543 #)
896,00B216-238400729-3238-250543 #)1.009,00B216-238500729-3238-260543 #)1.120,00B216-238600729-3238-270543 #)
899,00B225-246400729-3246-250543 #)1.010,00B225-246500729-3246-260543 #)1.123,00B225-246600729-3246-270543 #)
911,00B240-260400729-3260-250543 #)1.027,00B240-260500729-3260-260543 #)1.143,00B240-260600729-3260-270543 #)
914,00B250-270400729-3270-250543 #)1.030,00B250-270500729-3270-260543 #)1.148,00B250-270600729-3270-270543 #)
947,00B269-289400729-3289-250543 #)1.065,00B269-289500729-3289-260543 #)1.184,00B269-289600729-3289-270543 #)
979,00B273-293400729-3293-250543 #)1.105,00B273-293500729-3293-260543 #)1.231,00B273-293600729-3293-270543 #)1.000,00B282-302400729-3302-250543 #)1.131,00B282-302500729-3302-260543 #)1.264,00B282-302600729-3302-270543 #)1.010,00B295-315400729-3315-250543 #)1.144,00B295-315500729-3315-260543 #)1.279,00B295-315600729-3315-270543 #)1.025,00B315-335400729-3335-250543 #)1.163,00B315-335500729-3335-260543 #)1.299,00B315-335600729-3335-270543 #)1.030,00B322-344400729-3344-250543 #)1.169,00B322-344500729-3344-260543 #)1.309,00B322-344600729-3344-270543 #)1.038,00B337-358400729-3358-250543 #)1.178,00B337-358500729-3358-260543 #)1.319,00B337-358600729-3358-270543 #)1.176,00B347-367500729-3367-260543 #)1.319,00B347-367600729-3367-270543 #)1.617,00B347-367800729-3367-290543 #)1.209,00B365-385500729-3385-260543 #)1.355,00B365-385600729-3385-270543 #)1.650,00B365-385800729-3385-290543 #)1.221,00B382-402500729-3402-260543 #)1.368,00B382-402600729-3402-270543 #)
Repair clam
ps
Products for water according to ALL STD.
ALL STD
.
96 2007-07-10 10:47 CET
Gross priceEUR
Deliv.-code
Tmm
Lmm
AVK ref. nos.Type
Series 729/3
Double/Tripleband repairclamp type FSTNBR sealings
Note:# AISI 304, DN
65 flange
20543
1.669,00B382-402800729-3402-290543 #)1.232,00B396-420500729-3420-260543 #)1.383,00B396-420600729-3420-270543 #)1.687,00B396-420800729-3420-290543 #)1.246,00B410-430500729-3430-260543 #)1.400,00B410-430600729-3430-270543 #)1.708,00B410-430800729-3430-290543 #)1.252,00B420-440500729-3440-260543 #)1.408,00B420-440600729-3440-270543 #)1.722,00B420-440800729-3440-290543 #)1.264,00B435-455500729-3455-260543 #)1.421,00B435-455600729-3455-270543 #)1.740,00B435-455800729-3455-290543 #)1.281,00B450-470500729-3470-260543 #)1.441,00B450-470600729-3470-270543 #)1.767,00B450-470800729-3470-290543 #)1.292,00B468-488500729-3488-260543 #)1.456,00B468-488600729-3488-270543 #)1.785,00B468-488800729-3488-290543 #)1.315,00B485-505500729-3505-260543 #)1.483,00B485-505600729-3505-270543 #)1.821,00B485-505800729-3505-290543 #)1.327,00B500-520500729-3520-260543 #)1.496,00B500-520600729-3520-270543 #)1.840,00B500-520800729-3520-290543 #)1.344,00B516-536500729-3536-260543 #)1.518,00B516-536600729-3536-270543 #)1.868,00B516-536800729-3536-290543 #)1.355,00B532-552500729-3552-260543 #)1.531,00B532-552600729-3552-270543 #)1.886,00B532-552800729-3552-290543 #)
Gross priceEUR
Deliv.-code
Tmm
Lmm
AVK ref. nos.Type
Series 729/3
Double/Tripleband repairclamp type FSTNBR sealings
Note:# AISI 304, DN
80 flange
20546
741,00B88-110300729-3110-240546 #)841,00B88-110400729-3110-250546 #)936,00B88-110500729-3110-260546 #)
1.032,00B88-110600729-3110-270546 #)745,00B100-120300729-3120-240546 #)844,00B100-120400729-3120-250546 #)940,00B100-120500729-3120-260546 #)
1.038,00B100-120600729-3120-270546 #)746,00B108-128300729-3128-240546 #)846,00B108-128400729-3128-250546 #)944,00B108-128500729-3128-260546 #)
1.042,00B108-128600729-3128-270546 #)750,00B114-134300729-3134-240546 #)851,00B114-134400729-3134-250546 #)949,00B114-134500729-3134-260546 #)
1.048,00B114-134600729-3134-270546 #)755,00B120-140300729-3140-240546 #)858,00B120-140400729-3140-250546 #)957,00B120-140500729-3140-260546 #)
1.057,00B120-140600729-3140-270546 #)756,00B130-150300729-3150-240546 #)859,00B130-150400729-3150-250546 #)959,00B130-150500729-3150-260546 #)
1.060,00B130-150600729-3150-270546 #)758,00B135-155300729-3155-240546 #)861,00B135-155400729-3155-250546 #)960,00B135-155500729-3155-260546 #)
1.062,00B135-155600729-3155-270546 #)760,00B140-160300729-3160-240546 #)864,00B140-160400729-3160-250546 #)965,00B140-160500729-3160-260546 #)
1.068,00B140-160600729-3160-270546 #)768,00B159-180300729-3180-240546 #)874,00B159-180400729-3180-250546 #)979,00B159-180500729-3180-260546 #)
1.083,00B159-180600729-3180-270546 #)770,00B165-185300729-3185-240546 #)879,00B165-185400729-3185-250546 #)984,00B165-185500729-3185-260546 #)
1.088,00B165-185600729-3185-270546 #)771,00B168-189300729-3189-240546 #)879,00B168-189400729-3189-250546 #)
Repair clam
ps
Products for water according to ALL STD.
ALL STD
.
97 2007-07-10 10:47 CET
Gross priceEUR
Deliv.-code
Tmm
Lmm
AVK ref. nos.Type
Series 729/3
Double/Tripleband repairclamp type FSTNBR sealings
Note:# AISI 304, DN
80 flange
20546
985,00B168-189500729-3189-260546 #)1.090,00B168-189600729-3189-270546 #)
773,00B170-190300729-3190-240546 #)881,00B170-190400729-3190-250546 #)987,00B170-190500729-3190-260546 #)
1.091,00B170-190600729-3190-270546 #)776,00B175-196300729-3196-240546 #)886,00B175-196400729-3196-250546 #)992,00B175-196500729-3196-260546 #)
1.100,00B175-196600729-3196-270546 #)781,00B190-210300729-3210-240546 #)891,00B190-210400729-3210-250546 #)999,00B190-210500729-3210-260546 #)
1.106,00B190-210600729-3210-270546 #)894,00B195-217400729-3217-250546 #)
1.002,00B195-217500729-3217-260546 #)1.109,00B195-217600729-3217-270546 #)
906,00B210-230400729-3230-250546 #)1.017,00B210-230500729-3230-260546 #)1.126,00B210-230600729-3230-270546 #)
909,00B216-238400729-3238-250546 #)1.022,00B216-238500729-3238-260546 #)1.133,00B216-238600729-3238-270546 #)
911,00B225-246400729-3246-250546 #)1.023,00B225-246500729-3246-260546 #)1.136,00B225-246600729-3246-270546 #)
924,00B240-260400729-3260-250546 #)1.040,00B240-260500729-3260-260546 #)1.154,00B240-260600729-3260-270546 #)
927,00B250-270400729-3270-250546 #)1.043,00B250-270500729-3270-260546 #)1.159,00B250-270600729-3270-270546 #)
960,00B269-289400729-3289-250546 #)1.078,00B269-289500729-3289-260546 #)1.196,00B269-289600729-3289-270546 #)
992,00B273-293400729-3293-250546 #)1.118,00B273-293500729-3293-260546 #)1.244,00B273-293600729-3293-270546 #)1.012,00B282-302400729-3302-250546 #)1.144,00B282-302500729-3302-260546 #)1.276,00B282-302600729-3302-270546 #)1.023,00B295-315400729-3315-250546 #)1.158,00B295-315500729-3315-260546 #)1.290,00B295-315600729-3315-270546 #)1.037,00B315-335400729-3335-250546 #)1.174,00B315-335500729-3335-260546 #)1.312,00B315-335600729-3335-270546 #)1.043,00B322-344400729-3344-250546 #)1.183,00B322-344500729-3344-260546 #)1.320,00B322-344600729-3344-270546 #)1.050,00B337-358400729-3358-250546 #)1.191,00B337-358500729-3358-260546 #)1.332,00B337-358600729-3358-270546 #)1.189,00B347-367500729-3367-260546 #)1.332,00B347-367600729-3367-270546 #)1.630,00B347-367800729-3367-290546 #)1.221,00B365-385500729-3385-260546 #)1.368,00B365-385600729-3385-270546 #)1.664,00B365-385800729-3385-290546 #)1.232,00B382-402500729-3402-260546 #)1.382,00B382-402600729-3402-270546 #)1.682,00B382-402800729-3402-290546 #)1.244,00B396-420500729-3420-260546 #)1.395,00B396-420600729-3420-270546 #)1.700,00B396-420800729-3420-290546 #)1.259,00B410-430500729-3430-260546 #)1.413,00B410-430600729-3430-270546 #)1.723,00B410-430800729-3430-290546 #)1.266,00B420-440500729-3440-260546 #)1.421,00B420-440600729-3440-270546 #)1.735,00B420-440800729-3440-290546 #)1.277,00B435-455500729-3455-260546 #)1.435,00B435-455600729-3455-270546 #)1.753,00B435-455800729-3455-290546 #)1.294,00B450-470500729-3470-260546 #)1.455,00B450-470600729-3470-270546 #)1.780,00B450-470800729-3470-290546 #)1.305,00B468-488500729-3488-260546 #)1.468,00B468-488600729-3488-270546 #)1.798,00B468-488800729-3488-290546 #)1.329,00B485-505500729-3505-260546 #)1.496,00B485-505600729-3505-270546 #)
Repair clam
ps
Products for water according to ALL STD.
ALL STD
.
98 2007-07-10 10:47 CET
Gross priceEUR
Deliv.-code
Tmm
Lmm
AVK ref. nos.Type
Series 729/3
Double/Tripleband repairclamp type FSTNBR sealings
Note:# AISI 304, DN
80 flange
20546
1.835,00B485-505800729-3505-290546 #)1.340,00B500-520500729-3520-260546 #)1.509,00B500-520600729-3520-270546 #)1.853,00B500-520800729-3520-290546 #)1.357,00B516-536500729-3536-260546 #)1.529,00B516-536600729-3536-270546 #)1.879,00B516-536800729-3536-290546 #)1.368,00B532-552500729-3552-260546 #)1.544,00B532-552600729-3552-270546 #)1.898,00B532-552800729-3552-290546 #)
Gross priceEUR
Deliv.-code
Tmm
Lmm
AVK ref. nos.Type
Series 729/3
Double/Tripleband repairclamp type FSTNBR sealings
Note:# AISI 304, DN
100 flange
20549
821,00B108-128300729-3128-240549 #)931,00B108-128400729-3128-250549 #)
1.038,00B108-128500729-3128-260549 #)1.140,00B108-128600729-3128-270549 #)
853,00B114-134300729-3134-240549 #)954,00B114-134400729-3134-250549 #)
1.052,00B114-134500729-3134-260549 #)1.149,00B114-134600729-3134-270549 #)
858,00B120-140300729-3140-240549 #)959,00B120-140400729-3140-250549 #)
1.060,00B120-140500729-3140-260549 #)1.159,00B120-140600729-3140-270549 #)
859,00B130-150300729-3150-240549 #)962,00B130-150400729-3150-250549 #)
1.062,00B130-150500729-3150-260549 #)1.163,00B130-150600729-3150-270549 #)
861,00B135-155300729-3155-240549 #)964,00B135-155400729-3155-250549 #)
1.063,00B135-155500729-3155-260549 #)1.164,00B135-155600729-3155-270549 #)
862,00B140-160300729-3160-240549 #)967,00B140-160400729-3160-250549 #)
1.068,00B140-160500729-3160-260549 #)1.169,00B140-160600729-3160-270549 #)
871,00B159-180300729-3180-240549 #)977,00B159-180400729-3180-250549 #)
1.081,00B159-180500729-3180-260549 #)1.186,00B159-180600729-3180-270549 #)
874,00B165-185300729-3185-240549 #)980,00B165-185400729-3185-250549 #)
1.086,00B165-185500729-3185-260549 #)1.191,00B165-185600729-3185-270549 #)
876,00B168-189300729-3189-240549 #)982,00B168-189400729-3189-250549 #)
1.086,00B168-189500729-3189-260549 #)1.193,00B168-189600729-3189-270549 #)
877,00B170-190300729-3190-240549 #)984,00B170-190400729-3190-250549 #)
1.088,00B170-190500729-3190-260549 #)1.194,00B170-190600729-3190-270549 #)
879,00B175-196300729-3196-240549 #)989,00B175-196400729-3196-250549 #)
1.095,00B175-196500729-3196-260549 #)1.201,00B175-196600729-3196-270549 #)
882,00B190-210300729-3210-240549 #)994,00B190-210400729-3210-250549 #)
1.101,00B190-210500729-3210-260549 #)1.209,00B190-210600729-3210-270549 #)
995,00B195-217400729-3217-250549 #)1.105,00B195-217500729-3217-260549 #)1.212,00B195-217600729-3217-270549 #)1.007,00B210-230400729-3230-250549 #)1.118,00B210-230500729-3230-260549 #)1.229,00B210-230600729-3230-270549 #)1.012,00B216-238400729-3238-250549 #)1.123,00B216-238500729-3238-260549 #)1.236,00B216-238600729-3238-270549 #)1.013,00B225-246400729-3246-250549 #)1.126,00B225-246500729-3246-260549 #)1.239,00B225-246600729-3246-270549 #)
Repair clam
ps
Products for water according to ALL STD.
ALL STD
.
99 2007-07-10 10:47 CET
Gross priceEUR
Deliv.-code
Tmm
Lmm
AVK ref. nos.Type
Series 729/3
Double/Tripleband repairclamp type FSTNBR sealings
Note:# AISI 304, DN
100 flange
20549
1.027,00B240-260400729-3260-250549 #)1.141,00B240-260500729-3260-260549 #)1.257,00B240-260600729-3260-270549 #)1.028,00B250-270400729-3270-250549 #)1.146,00B250-270500729-3270-260549 #)1.262,00B250-270600729-3270-270549 #)1.062,00B269-289400729-3289-250549 #)1.181,00B269-289500729-3289-260549 #)1.299,00B269-289600729-3289-270549 #)1.095,00B273-293400729-3293-250549 #)1.138,00B273-293500729-3293-260549 #)1.347,00B273-293600729-3293-270549 #)1.115,00B282-302400729-3302-250549 #)1.241,00B282-302500729-3302-260549 #)1.378,00B282-302600729-3302-270549 #)1.125,00B295-315400729-3315-250549 #)1.259,00B295-315500729-3315-260549 #)1.393,00B295-315600729-3315-270549 #)1.140,00B315-335400729-3335-250549 #)1.277,00B315-335500729-3335-260549 #)1.415,00B315-335600729-3335-270549 #)1.148,00B322-344400729-3344-250549 #)1.284,00B322-344500729-3344-260549 #)1.423,00B322-344600729-3344-270549 #)1.153,00B337-358400729-3358-250549 #)1.294,00B337-358500729-3358-260549 #)1.435,00B337-358600729-3358-270549 #)1.292,00B347-367500729-3367-260549 #)1.433,00B347-367600729-3367-270549 #)1.732,00B347-367800729-3367-290549 #)1.324,00B365-385500729-3385-260549 #)1.471,00B365-385600729-3385-270549 #)1.767,00B365-385800729-3385-290549 #)1.335,00B382-402500729-3402-260549 #)1.485,00B382-402600729-3402-270549 #)1.785,00B382-402800729-3402-290549 #)1.347,00B396-420500729-3420-260549 #)1.498,00B396-420600729-3420-270549 #)1.803,00B396-420800729-3420-290549 #)1.362,00B410-430500729-3430-260549 #)1.514,00B410-430600729-3430-270549 #)1.826,00B410-430800729-3430-290549 #)1.368,00B420-440500729-3440-260549 #)1.523,00B420-440600729-3440-270549 #)1.836,00B420-440800729-3440-290549 #)1.380,00B435-455500729-3455-260549 #)1.538,00B435-455600729-3455-270549 #)1.854,00B435-455800729-3455-290549 #)1.397,00B450-470500729-3470-260549 #)1.558,00B450-470600729-3470-270549 #)1.881,00B450-470800729-3470-290549 #)1.408,00B468-488500729-3488-260549 #)1.571,00B468-488600729-3488-270549 #)1.901,00B468-488800729-3488-290549 #)1.430,00B485-505500729-3505-260549 #)1.599,00B485-505600729-3505-270549 #)1.937,00B485-505800729-3505-290549 #)1.441,00B500-520500729-3520-260549 #)1.612,00B500-520600729-3520-270549 #)1.956,00B500-520800729-3520-290549 #)1.458,00B516-536500729-3536-260549 #)1.632,00B516-536600729-3536-270549 #)1.982,00B516-536800729-3536-290549 #)1.470,00B532-552500729-3552-260549 #)1.645,00B532-552600729-3552-270549 #)2.000,00B532-552800729-3552-290549 #)
Repair clam
ps
Products for water according to ALL STD.
ALL STD
.
100 2007-07-10 10:47 CET
Gross priceEUR
Deliv.-code
Tmm
Lmm
AVK ref. nos.Type
Series 729/3
Double/Tripleband repairclamp type FSTNBR sealings
Note:# AISI 304, DN
125 flange
20552
1.038,00B135-155400729-3155-250552 #)1.140,00B135-155500729-3155-260552 #)1.239,00B135-155600729-3155-270552 #)1.042,00B140-160400729-3160-250552 #)1.144,00B140-160500729-3160-260552 #)1.224,00B140-160600729-3160-270552 #)1.053,00B159-180400729-3180-250552 #)1.158,00B159-180500729-3180-260552 #)1.262,00B159-180600729-3180-270552 #)1.057,00B165-185400729-3185-250552 #)1.161,00B165-185500729-3185-260552 #)1.267,00B165-185600729-3185-270552 #)1.058,00B168-189400729-3189-250552 #)1.163,00B168-189500729-3189-260552 #)1.267,00B168-189600729-3189-270552 #)1.060,00B170-190400729-3190-250552 #)1.164,00B170-190500729-3190-260552 #)1.269,00B170-190600729-3190-270552 #)1.063,00B175-196400729-3196-250552 #)1.171,00B175-196500729-3196-260552 #)1.277,00B175-196600729-3196-270552 #)1.068,00B190-210400729-3210-250552 #)1.176,00B190-210500729-3210-260552 #)1.285,00B190-210600729-3210-270552 #)1.071,00B195-217400729-3217-250552 #)1.179,00B195-217500729-3217-260552 #)1.289,00B195-217600729-3217-270552 #)1.083,00B210-230400729-3230-250552 #)1.194,00B210-230500729-3230-260552 #)1.305,00B210-230600729-3230-270552 #)1.086,00B216-238400729-3238-250552 #)1.199,00B216-238500729-3238-260552 #)1.310,00B216-238600729-3238-270552 #)1.090,00B225-246400729-3246-250552 #)1.201,00B225-246500729-3246-260552 #)1.314,00B225-246600729-3246-270552 #)1.101,00B240-260400729-3260-250552 #)1.217,00B240-260500729-3260-260552 #)1.334,00B240-260600729-3260-270552 #)1.105,00B250-270400729-3270-250552 #)1.221,00B250-270500729-3270-260552 #)1.339,00B250-270600729-3270-270552 #)1.138,00B269-289400729-3289-250552 #)1.256,00B269-289500729-3289-260552 #)1.375,00B269-289600729-3289-270552 #)1.169,00B273-293400729-3293-250552 #)1.295,00B273-293500729-3293-260552 #)1.421,00B273-293600729-3293-270552 #)1.191,00B282-302400729-3302-250552 #)1.322,00B282-302500729-3302-260552 #)1.455,00B282-302600729-3302-270552 #)1.201,00B295-315400729-3315-250552 #)1.335,00B295-315500729-3315-260552 #)1.470,00B295-315600729-3315-270552 #)1.216,00B315-335400729-3335-250552 #)1.353,00B315-335500729-3335-260552 #)1.490,00B315-335600729-3335-270552 #)1.221,00B322-344400729-3344-250552 #)1.360,00B322-344500729-3344-260552 #)1.499,00B322-344600729-3344-270552 #)1.229,00B337-358400729-3358-250552 #)1.368,00B337-358500729-3358-260552 #)1.509,00B337-358600729-3358-270552 #)1.378,00B347-367500729-3367-260552 #)1.521,00B347-367600729-3367-270552 #)1.808,00B347-367800729-3367-290552 #)1.400,00B365-385500729-3385-260552 #)1.546,00B365-385600729-3385-270552 #)1.841,00B365-385800729-3385-290552 #)1.412,00B382-402500729-3402-260552 #)1.559,00B382-402600729-3402-270552 #)1.859,00B382-402800729-3402-290552 #)1.423,00B396-420500729-3420-260552 #)1.574,00B396-420600729-3420-270552 #)1.879,00B396-420800729-3420-290552 #)1.436,00B410-430500729-3430-260552 #)1.591,00B410-430600729-3430-270552 #)1.901,00B410-430800729-3430-290552 #)1.443,00B420-440500729-3440-260552 #)1.599,00B420-440600729-3440-270552 #)1.912,00B420-440800729-3440-290552 #)1.455,00B435-455500729-3455-260552 #)
Repair clam
ps
Products for water according to ALL STD.
ALL STD
.
101 2007-07-10 10:47 CET
Gross priceEUR
Deliv.-code
Tmm
Lmm
AVK ref. nos.Type
Series 729/3
Double/Tripleband repairclamp type FSTNBR sealings
Note:# AISI 304, DN
125 flange
20552
1.612,00B435-455600729-3455-270552 #)1.931,00B435-455800729-3455-290552 #)1.471,00B450-470500729-3470-260552 #)1.632,00B450-470600729-3470-270552 #)1.957,00B450-470800729-3470-290552 #)1.483,00B468-488500729-3488-260552 #)1.647,00B468-488600729-3488-270552 #)1.975,00B468-488800729-3488-290552 #)1.506,00B485-505500729-3505-260552 #)1.674,00B485-505600729-3505-270552 #)2.012,00B485-505800729-3505-290552 #)1.518,00B500-520500729-3520-260552 #)1.687,00B500-520600729-3520-270552 #)2.030,00B500-520800729-3520-290552 #)1.534,00B516-536500729-3536-260552 #)1.708,00B516-536600729-3536-270552 #)2.058,00B516-536800729-3536-290552 #)1.546,00B532-552500729-3552-260552 #)1.722,00B532-552600729-3552-270552 #)2.077,00B532-552800729-3552-290552 #)
Gross priceEUR
Deliv.-code
Tmm
Lmm
AVK ref. nos.Type
Series 729/3
Double/Tripleband repairclamp type FSTNBR sealings
Note:# AISI 304, DN
150 flange
20555
1.249,00B168-189500729-3189-260555 #)1.355,00B168-189600729-3189-270555 #)1.251,00B170-190500729-3190-260555 #)1.357,00B170-190600729-3190-270555 #)1.257,00B175-196500729-3196-260555 #)1.363,00B175-196600729-3196-270555 #)1.164,00B190-210400729-3210-250555 #)1.264,00B190-210500729-3210-260555 #)1.372,00B190-210600729-3210-270555 #)1.266,00B195-217500729-3217-260555 #)1.375,00B195-217600729-3217-270555 #)1.183,00B210-230400729-3230-250555 #)1.281,00B210-230500729-3230-260555 #)1.392,00B210-230600729-3230-270555 #)1.189,00B216-238400729-3238-250555 #)1.285,00B216-238500729-3238-260555 #)1.398,00B216-238600729-3238-270555 #)1.201,00B225-246400729-3246-250555 #)1.289,00B225-246500729-3246-260555 #)1.400,00B225-246600729-3246-270555 #)1.211,00B240-260400729-3260-250555 #)1.304,00B240-260500729-3260-260555 #)1.420,00B240-260600729-3260-270555 #)1.307,00B250-270500729-3270-260555 #)1.425,00B250-270600729-3270-270555 #)1.344,00B269-289500729-3289-260555 #)1.461,00B269-289600729-3289-270555 #)1.382,00B273-293500729-3293-260555 #)1.509,00B273-293600729-3293-270555 #)1.408,00B282-302500729-3302-260555 #)1.541,00B282-302600729-3302-270555 #)1.421,00B295-315500729-3315-260555 #)1.556,00B295-315600729-3315-270555 #)1.440,00B315-335500729-3335-260555 #)1.576,00B315-335600729-3335-270555 #)1.446,00B322-344500729-3344-260555 #)1.586,00B322-344600729-3344-270555 #)1.456,00B337-358500729-3358-260555 #)1.596,00B337-358600729-3358-270555 #)1.465,00B347-367500729-3367-260555 #)1.607,00B347-367600729-3367-270555 #)1.894,00B347-367800729-3367-290555 #)1.486,00B365-385500729-3385-260555 #)1.632,00B365-385600729-3385-270555 #)1.927,00B365-385800729-3385-290555 #)1.498,00B382-402500729-3402-260555 #)1.647,00B382-402600729-3402-270555 #)1.946,00B382-402800729-3402-290555 #)1.509,00B396-420500729-3420-260555 #)1.660,00B396-420600729-3420-270555 #)1.966,00B396-420800729-3420-290555 #)1.523,00B410-430500729-3430-260555 #)1.677,00B410-430600729-3430-270555 #)
Repair clam
ps
Products for water according to ALL STD.
ALL STD
.
102 2007-07-10 10:47 CET
Gross priceEUR
Deliv.-code
Tmm
Lmm
AVK ref. nos.Type
Series 729/3
Double/Tripleband repairclamp type FSTNBR sealings
Note:# AISI 304, DN
150 flange
20555
1.987,00B410-430800729-3430-290555 #)1.529,00B420-440500729-3440-260555 #)1.685,00B420-440600729-3440-270555 #)1.999,00B420-440800729-3440-290555 #)1.541,00B435-455500729-3455-260555 #)1.699,00B435-455600729-3455-270555 #)2.017,00B435-455800729-3455-290555 #)1.558,00B450-470500729-3470-260555 #)1.718,00B450-470600729-3470-270555 #)2.043,00B450-470800729-3470-290555 #)1.569,00B468-488500729-3488-260555 #)1.733,00B468-488600729-3488-270555 #)2.062,00B468-488800729-3488-290555 #)1.592,00B485-505500729-3505-260555 #)1.760,00B485-505600729-3505-270555 #)2.098,00B485-505800729-3505-290555 #)1.604,00B500-520500729-3520-260555 #)1.775,00B500-520600729-3520-270555 #)2.116,00B500-520800729-3520-290555 #)1.621,00B516-536500729-3536-260555 #)1.795,00B516-536600729-3536-270555 #)2.145,00B516-536800729-3536-290555 #)1.632,00B532-552500729-3552-260555 #)1.808,00B532-552600729-3552-270555 #)2.163,00B532-552800729-3552-290555 #)
Gross priceEUR
Deliv.-code
Tmm
Lmm
AVK ref. nos.Type
Series 729/3
Double/Tripleband repairclamp type FSTNBR sealings
Note:# AISI 304, DN
175 flange
20557
1.635,00B190-210500729-3210-260557 #)1.743,00B190-210600729-3210-270557 #)1.637,00B195-217500729-3217-260557 #)1.747,00B195-217600729-3217-270557 #)1.652,00B210-230500729-3230-260557 #)1.763,00B210-230600729-3230-270557 #)1.546,00B216-238500729-3238-260557 #)1.770,00B216-238600729-3238-270557 #)1.660,00B225-246500729-3246-260557 #)1.771,00B225-246600729-3246-270557 #)1.675,00B240-260500729-3260-260557 #)1.791,00B240-260600729-3260-270557 #)1.679,00B250-270500729-3270-260557 #)1.796,00B250-270600729-3270-270557 #)1.713,00B269-289500729-3289-260557 #)1.833,00B269-289600729-3289-270557 #)1.753,00B273-293500729-3293-260557 #)1.879,00B273-293600729-3293-270557 #)1.780,00B282-302500729-3302-260557 #)1.912,00B282-302600729-3302-270557 #)1.793,00B295-315500729-3315-260557 #)1.927,00B295-315600729-3315-270557 #)1.811,00B315-335500729-3335-260557 #)1.947,00B315-335600729-3335-270557 #)1.818,00B322-344500729-3344-260557 #)1.957,00B322-344600729-3344-270557 #)1.828,00B337-358500729-3358-260557 #)1.967,00B337-358600729-3358-270557 #)1.825,00B347-367500729-3367-260557 #)1.967,00B347-367600729-3367-270557 #)2.266,00B347-367800729-3367-290557 #)1.858,00B365-385500729-3385-260557 #)2.004,00B365-385600729-3385-270557 #)2.299,00B365-385800729-3385-290557 #)1.869,00B382-402500729-3402-260557 #)2.017,00B382-402600729-3402-270557 #)2.319,00B382-402800729-3402-290557 #)1.881,00B396-420500729-3420-260557 #)2.032,00B396-420600729-3420-270557 #)2.337,00B396-420800729-3420-290557 #)1.894,00B410-430500729-3430-260557 #)2.049,00B410-430600729-3430-270557 #)2.359,00B410-430800729-3430-290557 #)1.901,00B420-440500729-3440-260557 #)2.057,00B420-440600729-3440-270557 #)2.370,00B420-440800729-3440-290557 #)1.912,00B435-455500729-3455-260557 #)2.070,00B435-455600729-3455-270557 #)
Repair clam
ps
Products for water according to ALL STD.
ALL STD
.
103 2007-07-10 10:47 CET
Gross priceEUR
Deliv.-code
Tmm
Lmm
AVK ref. nos.Type
Series 729/3
Double/Tripleband repairclamp type FSTNBR sealings
Note:# AISI 304, DN
175 flange
20557
2.389,00B435-455800729-3455-290557 #)1.929,00B450-470500729-3470-260557 #)2.090,00B450-470600729-3470-270557 #)2.415,00B450-470800729-3470-290557 #)1.941,00B468-488500729-3488-260557 #)2.105,00B468-488600729-3488-270557 #)2.433,00B468-488800729-3488-290557 #)1.964,00B485-505500729-3505-260557 #)2.131,00B485-505600729-3505-270557 #)2.470,00B485-505800729-3505-290557 #)1.975,00B500-520500729-3520-260557 #)2.146,00B500-520600729-3520-270557 #)2.488,00B500-520800729-3520-290557 #)1.992,00B516-536500729-3536-260557 #)2.166,00B516-536600729-3536-270557 #)2.516,00B516-536800729-3536-290557 #)2.004,00B532-552500729-3552-260557 #)2.180,00B532-552600729-3552-270557 #)2.534,00B532-552800729-3552-290557 #)
Gross priceEUR
Deliv.-code
Tmm
Lmm
AVK ref. nos.Type
Series 729/3
Double/Tripleband repairclamp type FSTNBR sealings
Note:# AISI 304, DN
200 flange
20558
1.800,00B216-238600729-3238-270558 #)1.803,00B225-246600729-3246-270558 #)1.821,00B240-260600729-3260-270558 #)1.826,00B250-270600729-3270-270558 #)1.864,00B269-289600729-3289-270558 #)1.911,00B273-293600729-3293-270558 #)1.811,00B282-302500729-3302-260558 #)1.942,00B282-302600729-3302-270558 #)1.825,00B295-315500729-3315-260558 #)1.957,00B295-315600729-3315-270558 #)1.841,00B315-335500729-3335-260558 #)1.979,00B315-335600729-3335-270558 #)1.849,00B322-344500729-3344-260558 #)1.987,00B322-344600729-3344-270558 #)1.858,00B337-358500729-3358-260558 #)1.999,00B337-358600729-3358-270558 #)1.868,00B347-367500729-3367-260558 #)2.010,00B347-367600729-3367-270558 #)2.297,00B347-367800729-3367-290558 #)1.889,00B365-385500729-3385-260558 #)2.035,00B365-385600729-3385-270558 #)2.330,00B365-385800729-3385-290558 #)1.899,00B382-402500729-3402-260558 #)2.049,00B382-402600729-3402-270558 #)2.349,00B382-402800729-3402-290558 #)1.911,00B396-420500729-3420-260558 #)2.062,00B396-420600729-3420-270558 #)2.367,00B396-420800729-3420-290558 #)1.926,00B410-430500729-3430-260558 #)2.080,00B410-430600729-3430-270558 #)2.390,00B410-430800729-3430-290558 #)1.849,00B420-440500729-3440-260558 #)2.088,00B420-440600729-3440-270558 #)2.402,00B420-440800729-3440-290558 #)1.944,00B435-455500729-3455-260558 #)2.102,00B435-455600729-3455-270558 #)2.420,00B435-455800729-3455-290558 #)1.961,00B450-470500729-3470-260558 #)2.121,00B450-470600729-3470-270558 #)2.447,00B450-470800729-3470-290558 #)1.972,00B468-488500729-3488-260558 #)2.135,00B468-488600729-3488-270558 #)2.465,00B468-488800729-3488-290558 #)1.995,00B485-505500729-3505-260558 #)2.163,00B485-505600729-3505-270558 #)2.501,00B485-505800729-3505-290558 #)2.007,00B500-520500729-3520-260558 #)2.176,00B500-520600729-3520-270558 #)2.520,00B500-520800729-3520-290558 #)2.024,00B516-536500729-3536-260558 #)2.198,00B516-536600729-3536-270558 #)2.546,00B516-536800729-3536-290558 #)2.035,00B532-552500729-3552-260558 #)2.211,00B532-552600729-3552-270558 #)
Repair clam
ps
Products for water according to ALL STD.
ALL STD
.
104 2007-07-10 10:47 CET
Gross priceEUR
Deliv.-code
Tmm
Lmm
AVK ref. nos.Type
Series 729/3
Double/Tripleband repairclamp type FSTNBR sealings
Note:# AISI 304, DN
200 flange
20558
2.564,00B532-552800729-3552-290558 #)
Gross priceEUR
Deliv.-code
Tmm
Lmm
AVK ref. nos.Type
Series 729/3
Double/Tripleband repairclamp type FSTNBR sealings
Note:# AISI 304, DN
50 flange
30540
1.538,00B548-578500729-3578-360540 #)1.755,00B548-578600729-3578-370540 #)2.193,00B548-578800729-3578-390540 #)1.549,00B568-598500729-3598-360540 #)1.768,00B568-598600729-3598-370540 #)2.209,00B568-598800729-3598-390540 #)1.587,00B588-618500729-3618-360540 #)1.813,00B588-618600729-3618-370540 #)2.269,00B588-618800729-3618-390540 #)1.833,00B608-638600729-3638-370540 #)2.296,00B608-638800729-3638-390540 #)1.854,00B628-658600729-3658-370540 #)2.324,00B628-658800729-3658-390540 #)1.874,00B648-678600729-3678-370540 #)2.350,00B648-678800729-3678-390540 #)1.894,00B668-698600729-3698-370540 #)2.377,00B668-698800729-3698-390540 #)1.921,00B688-718600729-3718-370540 #)2.412,00B688-718800729-3718-390540 #)1.941,00B708-738600729-3738-370540 #)2.438,00B708-738800729-3738-390540 #)1.961,00B728-758600729-3758-370540 #)2.466,00B728-758800729-3758-390540 #)1.982,00B748-778600729-3778-370540 #)2.493,00B748-778800729-3778-390540 #)2.002,00B768-798600729-3798-370540 #)2.521,00B768-798800729-3798-390540 #)
Gross priceEUR
Deliv.-code
Tmm
Lmm
AVK ref. nos.Type
Series 729/3
Double/Tripleband repairclamp type FSTNBR sealings
Note:# AISI 304, DN
65 flange
30543
1.569,00B548-578500729-3578-360543 #)1.785,00B548-578600729-3578-370543 #)2.221,00B548-578800729-3578-390543 #)1.579,00B568-598500729-3598-360543 #)1.798,00B568-598600729-3598-370543 #)2.239,00B568-598800729-3598-390543 #)1.617,00B588-618500729-3618-360543 #)1.843,00B588-618600729-3618-370543 #)2.299,00B588-618800729-3618-390543 #)1.863,00B608-638600729-3638-370543 #)2.325,00B608-638800729-3638-390543 #)1.883,00B628-658600729-3658-370543 #)2.352,00B628-658800729-3658-390543 #)1.904,00B648-678600729-3678-370543 #)2.380,00B648-678800729-3678-390543 #)1.924,00B668-698600729-3698-370543 #)2.407,00B668-698800729-3698-390543 #)1.951,00B688-718600729-3718-370543 #)2.442,00B688-718800729-3718-390543 #)1.971,00B708-738600729-3738-370543 #)2.468,00B708-738800729-3738-390543 #)1.990,00B728-758600729-3758-370543 #)2.496,00B728-758800729-3758-390543 #)2.012,00B748-778600729-3778-370543 #)
Repair clam
ps
Products for water according to ALL STD.
ALL STD
.
105 2007-07-10 10:47 CET
Gross priceEUR
Deliv.-code
Tmm
Lmm
AVK ref. nos.Type
Series 729/3
Double/Tripleband repairclamp type FSTNBR sealings
Note:# AISI 304, DN
65 flange
30543
2.523,00B748-778800729-3778-390543 #)2.032,00B768-798600729-3798-370543 #)2.551,00B768-798800729-3798-390543 #)
Gross priceEUR
Deliv.-code
Tmm
Lmm
AVK ref. nos.Type
Series 729/3
Double/Tripleband repairclamp type FSTNBR sealings
Note:# AISI 304, DN
80 flange
30546
1.582,00B548-578500729-3578-360546 #)1.798,00B548-578600729-3578-370546 #)2.234,00B548-578800729-3578-390546 #)1.592,00B568-598500729-3598-360546 #)1.811,00B568-598600729-3598-370546 #)2.251,00B568-598800729-3598-390546 #)1.629,00B588-618500729-3618-360546 #)1.856,00B588-618600729-3618-370546 #)2.311,00B588-618800729-3618-390546 #)1.876,00B608-638600729-3638-370546 #)2.339,00B608-638800729-3638-390546 #)1.896,00B628-658600729-3658-370546 #)2.365,00B628-658800729-3658-390546 #)1.917,00B648-678600729-3678-370546 #)2.393,00B648-678800729-3678-390546 #)1.937,00B668-698600729-3698-370546 #)2.420,00B668-698800729-3698-390546 #)1.962,00B688-718600729-3718-370546 #)2.455,00B688-718800729-3718-390546 #)1.984,00B708-738600729-3738-370546 #)2.481,00B708-738800729-3738-390546 #)2.004,00B728-758600729-3758-370546 #)2.508,00B728-758800729-3758-390546 #)2.024,00B748-778600729-3778-370546 #)2.536,00B748-778800729-3778-390546 #)2.045,00B768-798600729-3798-370546 #)2.563,00B768-798800729-3798-390546 #)
Gross priceEUR
Deliv.-code
Tmm
Lmm
AVK ref. nos.Type
Series 729/3
Double/Tripleband repairclamp type FSTNBR sealings
Note:# AISI 304, DN
100 flange
30549
1.684,00B548-578500729-3578-360549 #)1.901,00B548-578600729-3578-370549 #)2.337,00B548-578800729-3578-390549 #)1.694,00B568-598500729-3598-360549 #)1.912,00B568-598600729-3598-370549 #)2.354,00B568-598800729-3598-390549 #)1.732,00B588-618500729-3618-360549 #)1.957,00B588-618600729-3618-370549 #)2.413,00B588-618800729-3618-390549 #)1.979,00B608-638600729-3638-370549 #)2.440,00B608-638800729-3638-390549 #)1.999,00B628-658600729-3658-370549 #)2.468,00B628-658800729-3658-390549 #)2.572,00B648-678600729-3678-370549 #)2.495,00B648-678800729-3678-390549 #)2.040,00B668-698600729-3698-370549 #)2.523,00B668-698800729-3698-390549 #)2.065,00B688-718600729-3718-370549 #)2.556,00B688-718800729-3718-390549 #)2.085,00B708-738600729-3738-370549 #)2.584,00B708-738800729-3738-390549 #)2.107,00B728-758600729-3758-370549 #)2.611,00B728-758800729-3758-390549 #)2.127,00B748-778600729-3778-370549 #)2.639,00B748-778800729-3778-390549 #)
Repair clam
ps
Products for water according to ALL STD.
ALL STD
.
106 2007-07-10 10:47 CET
Gross priceEUR
Deliv.-code
Tmm
Lmm
AVK ref. nos.Type
Series 729/3
Double/Tripleband repairclamp type FSTNBR sealings
Note:# AISI 304, DN
100 flange
30549
2.146,00B768-798600729-3798-370549 #)2.666,00B768-798800729-3798-390549 #)
Gross priceEUR
Deliv.-code
Tmm
Lmm
AVK ref. nos.Type
Series 729/3
Double/Tripleband repairclamp type FSTNBR sealings
Note:# AISI 304, DN
125 flange
30552
1.760,00B548-578500729-3578-360552 #)1.975,00B548-578600729-3578-370552 #)2.412,00B548-578800729-3578-390552 #)1.770,00B568-598500729-3598-360552 #)1.989,00B568-598600729-3598-370552 #)2.430,00B568-598800729-3598-390552 #)1.808,00B588-618500729-3618-360552 #)2.034,00B588-618600729-3618-370552 #)2.490,00B588-618800729-3618-390552 #)2.053,00B608-638600729-3638-370552 #)2.516,00B608-638800729-3638-390552 #)2.073,00B628-658600729-3658-370552 #)2.543,00B628-658800729-3658-390552 #)2.095,00B648-678600729-3678-370552 #)2.571,00B648-678800729-3678-390552 #)2.115,00B668-698600729-3698-370552 #)2.598,00B668-698800729-3698-390552 #)2.141,00B688-718600729-3718-370552 #)2.632,00B688-718800729-3718-390552 #)2.161,00B708-738600729-3738-370552 #)2.659,00B708-738800729-3738-390552 #)2.181,00B728-758600729-3758-370552 #)2.687,00B728-758800729-3758-390552 #)2.203,00B748-778600729-3778-370552 #)2.714,00B748-778800729-3778-390552 #)2.223,00B768-798600729-3798-370552 #)2.742,00B768-798800729-3798-390552 #)
Gross priceEUR
Deliv.-code
Tmm
Lmm
AVK ref. nos.Type
Series 729/3
Double/Tripleband repairclamp type FSTNBR sealings
Note:# AISI 304, DN
150 flange
30555
2.062,00B548-578600729-3578-370555 #)2.500,00B548-578800729-3578-390555 #)2.075,00B568-598600729-3598-370555 #)2.516,00B568-598800729-3598-390555 #)2.120,00B588-618600729-3618-370555 #)2.576,00B588-618800729-3618-390555 #)2.140,00B608-638600729-3638-370555 #)2.602,00B608-638800729-3638-390555 #)2.161,00B628-658600729-3658-370555 #)2.629,00B628-658800729-3658-390555 #)2.181,00B648-678600729-3678-370555 #)2.657,00B648-678800729-3678-390555 #)2.201,00B668-698600729-3698-370555 #)2.684,00B668-698800729-3698-390555 #)2.228,00B688-718600729-3718-370555 #)2.719,00B688-718800729-3718-390555 #)2.248,00B708-738600729-3738-370555 #)2.745,00B708-738800729-3738-390555 #)2.267,00B728-758600729-3758-370555 #)2.773,00B728-758800729-3758-390555 #)2.289,00B748-778600729-3778-370555 #)2.800,00B748-778800729-3778-390555 #)2.309,00B768-798600729-3798-370555 #)2.828,00B768-798800729-3798-390555 #)
Repair clam
ps
Products for water according to ALL STD.
ALL STD
.
107 2007-07-10 10:47 CET
Gross priceEUR
Deliv.-code
Tmm
Lmm
AVK ref. nos.Type
Series 729/3
Double/Tripleband repairclamp type FSTNBR sealings
Note:# AISI 304, DN
175 flange
30557
2.433,00B548-578600729-3578-370557 #)2.871,00B548-578800729-3578-390557 #)2.447,00B568-598600729-3598-370557 #)2.888,00B568-598800729-3598-390557 #)2.491,00B588-618600729-3618-370557 #)2.948,00B588-618800729-3618-390557 #)2.511,00B608-638600729-3638-370557 #)2.974,00B608-638800729-3638-390557 #)2.533,00B628-658600729-3658-370557 #)3.001,00B628-658800729-3658-390557 #)2.553,00B648-678600729-3678-370557 #)3.029,00B648-678800729-3678-390557 #)2.573,00B668-698600729-3698-370557 #)3.055,00B668-698800729-3698-390557 #)2.599,00B688-718600729-3718-370557 #)3.090,00B688-718800729-3718-390557 #)2.619,00B708-738600729-3738-370557 #)3.117,00B708-738800729-3738-390557 #)2.639,00B728-758600729-3758-370557 #)3.145,00B728-758800729-3758-390557 #)2.661,00B748-778600729-3778-370557 #)3.171,00B748-778800729-3778-390557 #)2.680,00B768-798600729-3798-370557 #)3.200,00B768-798800729-3798-390557 #)
Gross priceEUR
Deliv.-code
Tmm
Lmm
AVK ref. nos.Type
Series 729/3
Double/Tripleband repairclamp type FSTNBR sealings
Note:# AISI 304, DN
200 flange
30558
2.465,00B548-578600729-3578-370558 #)2.901,00B548-578800729-3578-390558 #)2.478,00B568-598600729-3598-370558 #)2.918,00B568-598800729-3598-390558 #)2.523,00B588-618600729-3618-370558 #)2.977,00B588-618800729-3618-390558 #)2.543,00B608-638600729-3638-370558 #)3.006,00B608-638800729-3638-390558 #)2.563,00B628-658600729-3658-370558 #)3.032,00B628-658800729-3658-390558 #)2.584,00B648-678600729-3678-370558 #)3.060,00B648-678800729-3678-390558 #)2.604,00B668-698600729-3698-370558 #)3.087,00B668-698800729-3698-390558 #)2.629,00B688-718600729-3718-370558 #)3.122,00B688-718800729-3718-390558 #)2.651,00B708-738600729-3738-370558 #)3.148,00B708-738800729-3738-390558 #)2.671,00B728-758600729-3758-370558 #)3.176,00B728-758800729-3758-390558 #)2.690,00B748-778600729-3778-370558 #)3.203,00B748-778800729-3778-390558 #)2.709,00B768-798600729-3798-370558 #)3.229,00B768-798800729-3798-390558 #)
Gross priceEUR
Deliv.-code
Tmm
Lmm
AVK ref. nos.Type
Series 729/30
Triple bandrepair clamptype FS 30NBR sealings
Note:# AISI 304
05
420,00B270-300300729-0300-3405 #)557,00B270-300400729-0300-3505 #)693,00B270-300500729-0300-3605 #)827,00B270-300600729-0300-3705 #)
1.100,00B270-300800729-0300-3905 #)431,00B310-340300729-0340-3405 #)570,00B310-340400729-0340-3505 #)709,00B310-340500729-0340-3605 #)848,00B310-340600729-0340-3705 #)
1.128,00B310-340800729-0340-3905 #)440,00B340-370300729-0370-3405 #)582,00B340-370400729-0370-3505 #)724,00B340-370500729-0370-3605 #)866,00B340-370600729-0370-3705 #)
1.150,00B340-370800729-0370-3905 #)444,00B365-395300729-0395-3405 #)
Repair clam
ps
Products for water according to ALL STD.
ALL STD
.
108 2007-07-10 10:47 CET
Gross priceEUR
Deliv.-code
Tmm
Lmm
AVK ref. nos.Type
Series 729/30
Triple bandrepair clamptype FS 30NBR sealings
Note:# AISI 304
05
588,00B365-395400729-0395-3505 #)731,00B365-395500729-0395-3605 #)873,00B365-395600729-0395-3705 #)
1.161,00B365-395800729-0395-3905 #)456,00B395-425300729-0425-3405 #)604,00B395-425400729-0425-3505 #)752,00B395-425500729-0425-3605 #)900,00B395-425600729-0425-3705 #)
1.196,00B395-425800729-0425-3905 #)461,00B420-450300729-0450-3405 #)610,00B420-450400729-0450-3505 #)758,00B420-450500729-0450-3605 #)974,00B420-450600729-0450-3705 #)
1.207,00B420-450800729-0450-3905 #)502,00B440-470300729-0470-3405 #)665,00B440-470400729-0470-3505 #)827,00B440-470500729-0470-3605 #)990,00B440-470600729-0470-3705 #)
1.316,00B440-470800729-0470-3905 #)503,00B450-480300729-0480-3405 #)666,00B450-480400729-0480-3505 #)830,00B450-480500729-0480-3605 #)995,00B450-480600729-0480-3705 #)
1.322,00B450-480800729-0480-3905 #)514,00B475-505300729-0505-3405 #)681,00B475-505400729-0505-3505 #)848,00B475-505500729-0505-3605 #)
1.016,00B475-505600729-0505-3705 #)1.350,00B475-505800729-0505-3905 #)
524,00B500-530300729-0530-3405 #)694,00B500-530400729-0530-3505 #)866,00B500-530500729-0530-3605 #)
1.036,00B500-530600729-0530-3705 #)1.377,00B500-530800729-0530-3905 #)
525,00B510-540300729-0540-3405 #)696,00B510-540400729-0540-3505 #)868,00B510-540500729-0540-3605 #)
1.037,00B510-540600729-0540-3705 #)1.380,00B510-540800729-0540-3905 #)
531,00B520-550300729-0550-3405 #)704,00B520-550400729-0550-3505 #)878,00B520-550500729-0550-3605 #)
1.051,00B520-550600729-0550-3705 #)1.397,00B520-550800729-0550-3905 #)
536,00B530-560300729-0560-3405 #)709,00B530-560400729-0560-3505 #)884,00B530-560500729-0560-3605 #)
1.058,00B530-560600729-0560-3705 #)1.407,00B530-560800729-0560-3905 #)
542,00B540-570300729-0570-3405 #)718,00B540-570400729-0570-3505 #)894,00B540-570500729-0570-3605 #)
1.070,00B540-570600729-0570-3705 #)1.424,00B540-570800729-0570-3905 #)
546,00B560-590300729-0590-3405 #)724,00B560-590400729-0590-3505 #)902,00B560-590500729-0590-3605 #)
1.079,00B560-590600729-0590-3705 #)1.434,00B560-590800729-0590-3905 #)
548,00B570-600300729-0600-3405 #)727,00B570-600400729-0600-3505 #)906,00B570-600500729-0600-3605 #)
1.084,00B570-600600729-0600-3705 #)1.440,00B570-600800729-0600-3905 #)
560,00B580-610300729-0610-3405 #)744,00B580-610400729-0610-3505 #)928,00B580-610500729-0610-3605 #)
1.111,00B580-610600729-0610-3705 #)1.479,00B580-610800729-0610-3905 #)
562,00B590-620300729-0620-3405 #)747,00B590-620400729-0620-3505 #)933,00B590-620500729-0620-3605 #)
1.118,00B590-620600729-0620-3705 #)1.488,00B590-620800729-0620-3905 #)
563,00B600-630300729-0630-3405 #)749,00B600-630400729-0630-3505 #)936,00B600-630500729-0630-3605 #)
1.222,00B600-630600729-0630-3705 #)1.494,00B600-630800729-0630-3905 #)
755,00B610-640300729-0640-3405 #)567,00B610-640400729-0640-3505 #)943,00B610-640500729-0640-3605 #)
Repair clam
ps
Products for water according to ALL STD.
ALL STD
.
109 2007-07-10 10:47 CET
Gross priceEUR
Deliv.-code
Tmm
Lmm
AVK ref. nos.Type
Series 729/30
Triple bandrepair clamptype FS 30NBR sealings
Note:# AISI 304
05
1.131,00B610-640600729-0640-3705 #)1.508,00B610-640800729-0640-3905 #)
570,00B610-640300729-0650-3405 #)739,00B610-640400729-0650-3505 #)951,00B610-640500729-0650-3605 #)
1.141,00B610-640600729-0650-3705 #)1.521,00B610-640800729-0650-3905 #)
574,00B630-660300729-0660-3405 #)766,00B630-660400729-0660-3505 #)957,00B630-660500729-0660-3605 #)
1.149,00B630-660600729-0660-3705 #)1.532,00B630-660800729-0660-3905 #)
577,00B640-670300729-0670-3405 #)769,00B640-670400729-0670-3505 #)962,00B640-670500729-0670-3605 #)
1.155,00B640-670600729-0670-3705 #)1.541,00B640-670800729-0670-3905 #)
578,00B650-680300729-0680-3405 #)773,00B650-680400729-0680-3505 #)968,00B650-680500729-0680-3605 #)
1.163,00B650-680600729-0680-3705 #)1.545,00B650-680800729-0680-3905 #)
583,00B660-690300729-0690-3405 #)779,00B660-690400729-0690-3505 #)975,00B660-690500729-0690-3605 #)
1.171,00B660-690600729-0690-3705 #)1.564,00B660-690800729-0690-3905 #)
587,00B670-700300729-0700-3405 #)785,00B670-700400729-0700-3505 #)983,00B670-700500729-0700-3605 #)
1.181,00B670-700600729-0700-3705 #)1.576,00B670-700800729-0700-3905 #)
592,00B680-710300729-0710-3405 #)791,00B680-710400729-0710-3505 #)990,00B680-710500729-0710-3605 #)
1.190,00B680-710600729-0710-3705 #)1.588,00B680-710800729-0710-3905 #)
596,00B690-720300729-0720-3405 #)797,00B690-720400729-0720-3505 #)998,00B690-720500729-0720-3605 #)
1.199,00B690-720600729-0720-3705 #)1.600,00B690-720800729-0720-3905 #)
600,00B700-730300729-0730-3405 #)803,00B700-730400729-0730-3505 #)
1.005,00B700-730500729-0730-3605 #)1.207,00B700-730600729-0730-3705 #)1.612,00B700-730800729-0730-3905 #)
605,00B710-740300729-0740-3405 #)809,00B710-740400729-0740-3505 #)
1.013,00B710-740500729-0740-3605 #)1.217,00B710-740600729-0740-3705 #)1.624,00B710-740800729-0740-3905 #)
614,00B720-750300729-0750-3405 #)820,00B720-750400729-0750-3505 #)
1.026,00B720-750500729-0750-3605 #)1.232,00B720-750600729-0750-3705 #)1.643,00B720-750800729-0750-3905 #)
623,00B730-760300729-0760-3405 #)831,00B730-760400729-0760-3505 #)
1.039,00B730-760500729-0760-3605 #)1.247,00B730-760600729-0760-3705 #)1.662,00B730-760800729-0760-3905 #)
632,00B740-770300729-0770-3405 #)842,00B740-770400729-0770-3505 #)
1.051,00B740-770500729-0770-3605 #)1.260,00B740-770600729-0770-3705 #)1.679,00B740-770800729-0770-3905 #)
647,00B750-780300729-0780-3405 #)858,00B750-780400729-0780-3505 #)
1.069,00B750-780500729-0780-3605 #)1.280,00B750-780600729-0780-3705 #)1.703,00B750-780800729-0780-3905 #)
651,00B760-790300729-0790-3405 #)863,00B760-790400729-0790-3505 #)
1.076,00B760-790500729-0790-3605 #)1.289,00B760-790600729-0790-3705 #)1.715,00B760-790800729-0790-3905 #)
659,00B770-800300729-0800-3405 #)874,00B770-800400729-0800-3505 #)
1.089,00B770-800500729-0800-3605 #)1.304,00B770-800600729-0800-3705 #)1.734,00B770-800800729-0800-3905 #)
Repair clam
ps
Products for water according to ALL STD.
ALL STD
.
110 2007-07-10 10:47 CET
Gross priceEUR
Deliv.-code
Tmm
Lmm
AVK ref. nos.Type
Series 729/30
Triple bandrepair clamptype FS 30NBR sealings
Note:# AISI 304
05
666,00B780-810300729-0810-3405 #)883,00B780-810400729-0810-3505 #)
1.100,00B780-810500729-0810-3605 #)1.317,00B780-810600729-0810-3705 #)1.750,00B780-810800729-0810-3905 #)
672,00B790-820300729-0820-3405 #)890,00B790-820400729-0820-3505 #)
1.109,00B790-820500729-0820-3605 #)1.327,00B790-820600729-0820-3705 #)1.764,00B790-820800729-0820-3905 #)
678,00B800-830300729-0830-3405 #)898,00B800-830400729-0830-3505 #)
1.117,00B800-830500729-0830-3605 #)1.336,00B800-830600729-0830-3705 #)1.775,00B800-830800729-0830-3905 #)
685,00B810-840300729-0840-3405 #)906,00B810-840400729-0840-3505 #)
1.127,00B810-840500729-0840-3605 #)1.348,00B810-840600729-0840-3705 #)1.790,00B810-840800729-0840-3905 #)
Repair clam
ps
Products for water according to ALL STD.
ALL STD
.
111 2007-07-10 10:47 CET
Gross priceEUR
Deliv.-code
Units pr.pallet
Theoreticalweight kg
AVK ref. nos.Type
Series 80/33
Surface Box for serviceconn. valves acc. to DIN4059Housing in PALid in GG-20
Note:# Standard
01
38,00A48380-33-03200 #)
Gross priceEUR
Deliv.-code
Units pr.pallet
Theoreticalweight kg
AVK ref. nos.Type
Series 80/34
Surface Box forgate valves acc. to DIN 3581Housing in PALid in GG-20
Note:# Standard
01
57,00A30680-34-03200 #)
Gross priceEUR
Deliv.-code
Units pr.pallet
Theoreticalweight kg
AVK ref. nos.Type
Series 80/34
Surface Box for gatevalves acc. to DIN 3581Housing in PALid in GG-20
Note:# Height adjustable
02
77,00A30780-34-13000 #)
Gross priceEUR
Deliv.-code
Units pr.pallet
Theoreticalweight kg
AVK ref. nos.Type
Series 80/35
Surface Box forgate valves acc.to DIN 3582Housing in PALid in GG-20
Note:# Standard
01
B080-35-03204 #)
Surface boxes
Products for gas according to ALL STD.
ALL STD
.
112 2007-07-10 10:47 CET
Gross priceEUR
Units pr.pallet
Theoreticalweight kg
Deliv.-code
AVK ref. nos.Type
Series 80/46
Support tile forsurface boxes
Note:# With spindle
fixation. Fortype 80/31,80/32, 80/33and 80/34
01
8,00601A80-46-00001 #)
Gross priceEUR
Units pr.pallet
Theoreticalweight kg
Deliv.-code
AVK ref. nos.Type
Series 80/46
Support tile forsurface boxes
Note:# For type 80/31,
80/32, 80/33and 80/34
02
8,001A80-46-00000 #)
Gross priceEUR
Units pr.pallet
Theoreticalweight kg
Deliv.-code
AVK ref. nos.Type
Series 80/46
Support tile forsurface boxes
Note:# For type 80/30
and 80/35
03
17,002A80-46-00005 #)
Surface boxes
Products for gas according to ALL STD.
ALL STD
.
113 2007-07-10 10:47 CET
A V K I n t e r n A t I o n A l
Duct i l e I ron F i t t i ngs
AVK 's P roduc t P rogramme
meets Your Requ i rements
S h o t b l a s t i n g
Sewage Treatment
Gate valves, knife valves, air valves,
check valves, butterfly valves etc.
Two of AVK's four segments:
Water Supply
Gate valves and accessories,
air valves, swing check valves,
hydrants, butterfly valves etc.
AVK
AVK is one of the leading valve and fittings manufacturers
for the water, gas and sewage industries as well as Fire
Protection worldwide.
Our product programme comprises a wide range of
valves, hydrants, pipe fittings and accessories, each
complying with the highest standards of safety and
durability.
The AVK product programme also comprises a wide
range of fittings in ductile iron for the water- and sewage
supply. The product programme is approved according
to DVGW W270 for use in the drinking water supply.
Test on shot blasting
AVK - Supp l i e r o f H igh
Qua l i t y P roduc ts
D i s p a t c h
C o a t i n g C o a t i n g i n s p e c t i o n
When it comes to quality at AVK, nothing is left to chance.
The raw material delivered at our high-performance factory
is tested thoroughly, and random samples are run; a.o.
pressure tests.
Prior to coating, the cast parts are blast cleaned in our
full-automatic shot blaster according to the international
standard DIN 55928 SA 2.5. After blast cleaning, the parts
are applied internal coating according to DIN 3476 and
external coating according to DIN 30677-1. Additionally,
our coating is approved and monitored according to the
GSK guidelines for RAL-GZ 662.
After coating, the products are tested for a correct coating
thickness before dispatch.
Introduction
60 3 84 M 20
80 3 84 M 20
100 3 84 M 20
125 4 84 M 20
150 6 84 M 20
200 6 84 M 20
250 8 84 M 20
300 8 84 M 20
350 10 97 M 20
400 12 97 M 20
500 14 97 M 20
600 16 97 M 20
L D
Standards The fittings included in this catalogue are according to the European standard en 545 and en 12842 for UPVC fittings which specifies the requirements and associated test methods applicable to ductile iron pipes, fittings, accessories and their joints for construction of pipelines:
- to convey water (e.g. potable water); - with or without pressure; - to be installed below or above ground; - suitable for fluid temperatures between 0°C and 50°C, excluding frost.
The fittings are produced in the size range stated under each section. Sizes up to and including DN 2000 can be supplied on request.
The standardized nominal sizes (DN) for fittings are as follows:
40, 50, 60, 65, 80, 100, 125, 150, 200, 250, 300, 350, 400, 450, 500, 600, 700, 800, 900, 1000, 1100, 1200, 1400, 1500, 1600, 1800 and 2000.
All fittings are made of ductile iron, cast iron GGG and produced according to EN 545 and EN 12842.
Flanges and drillings are according to ISO 7005-2 PN 10 or PN 16.
Both fixed and turnable flanges are available. Please see each section.
Spigot ends are according to ISO 2531 for cast iron pipes. Mobile flanged fittings are according to DIN EN 1092-2.
Sockets for cast iron pipes are Tyton sockets according to DIN 28603. Fittings with TYTON sockets are not supplied with seating rings.
Sockets for PVC pipes are Euro sockets
Fittings for UPVC-pipes are supplied with sealing rings. All fittings are pressure tested according to EN 545. Face to face dimensions are stated under each section, with the tolerance given in Table 1.
Coating All fittings are epoxy coated blue RAL 5017 internally and externally min 250 micron. For coating according to DIN 30677 part 2, and GSK guidelines.
All fittings are marked according to the European standard EN 545.
All joints are designed to be fully flexible; consequently, the allowable angular deflection must not exceed:
3,5 gr. for DN 40 to DN 300 2,5 gr. for DN 350 to DN 600 1,5 gr. for DN 700 to DN 2000
Please note that all fittings are subject to technical changes which may cause weight changes.
Mechanical joints for ductile iron pipes The mechanical joint used in ductile iron pipes is based on the well-known gland and packing principle. A wedge-shaped rubber gasket with two areas of different hardness, located in the fitting socket is com-pressed against the pipe spigot by means of a flanged gland, bolts, and nuts.
The design of the bolt and the nut is patented and consists of a blind nut which protects the thread against corrosion, and a nonturning bolt which makes installation very easy. The dimensions of the bolt are given in Table 2.
Seal is guaranteed while permitting deflections up to:
5°C for DN 50 to DN 150 4°C for DN 200 to DN 300 3°C for DN 350 to DN 500 2°C for DN 600
note: Designed to be used only with ductile iron pipes according to DIn.
The mechanical joint uses a nonturning bolt which makes installation very easy.
Table 2Table 1
type of fitting Dn Deviation (mm.)
Flanged sockets 40 to 1200 ± 25 Flanged spigots 1400 to 2000 ± 35 Collars, tapers
Tees 40 to 1200 + 50/- 25 1400 to 2000 + 75/- 35
Bends 90° (1/4) 40 to 2000 ± (15 + 0,03 DN) Bends 45° (1/8) 40 to 2000 ± (10 + 0,025 DN)
Bends 22° 30' and 40 to 1200 ± (10 + 0,02 DN) 11° 15' (1/16 and 1/32) 1400 to 2000 ± (10 + 0,025 DN)
Dn no. of bolts l D
Introduction
Price list 2006Introduction
Delivery concept
Assorted container 15-20 tonnes FOB Nanjing Packing included in prices Recyclable, non returnable packing Delivery time 14 weeks
Full pallets. Units pr. pallet according to price list Packing included in prices Recyclable, non returnable packing Min. net order size: EURO 10.000,- Delivery time 4 weeks for stocked items
Assorted pallets Picking fee net pr. order line: EURO 10,- Packing at extra charge Recyclable, non returnable packing Delivery time 2 weeks for stocked items
All Fittings are labeled with bar code.
Designed according to EN 12842 EN 12842
Basic DIN design standard 2007-07-10 11:28 CET
Water
712/7011, EN-KS, Duckfoot bendflanged socket 90 for UPVCpipes according to EN 12842
1
712/7511, E-KS, Flanged socketpiece for UPVC pipes, accordingto EN 12842
1
712/7512, F-KS, Flanged spigotfor UPVC pipes, according to EN12842
2
712/0130, MMK-KS, Doublesocket bend 11.25 for UPVCpipes, according to EN 12842
2
712/0230, MMK-KS, Doublesocket bend 22.5 for UPVC pipesaccording to EN 12842
3
712/0430, MMK-KS, Doublesocket bend 45 for UPVC pipesaccording to EN 12842
3
712/0630, MMK-KS, Doublesocket bend 90 for UPVC pipesaccording to EN 12842
4
712/1030, MMB-KS, Socket Teewith socket branch for UPVCpipes according to EN 12842
4
712/2030, MMR-KS, Doublesocket reducer for UPVC pipes,according to EN 12842
5
Gross priceEUR
Theoreticalweight kg
PN bar
W1mm
H3mm
H2mm
Ddmm
DN mm
AVK ref. nos.Type
Series 712/7011
EN-KSDuckfoot bend flangedsocket 90 for UPVCpipes according to EN12842Standard flange drillingto ISO 7005-2,EN1092-2: 1997Epoxy coatedaccording to DIN30677-2 and GSKguide linesDN 80-150
1
83,001110/162602881089080712-0080-70111171,002510/16295320120110150712-0150-70111103,001610/16300340120160100712-0152-70111
Gross priceEUR
Theoreticalweight kg
PN bar
Zmm
Lmm
Ddmm
DN mm
AVK ref. nos.Type
Series 712/7511
E-KSFlanged socketpiece for UPVCpipesaccording to EN12842Standard flangedrilling to ISO7005-2, EN1092-2:1997Epoxy coatedaccording to DIN30677-2 and GSKguide linesDN 50-300
1
28,00310/16151066350712-0050-7511128,00410/16151127560712-0060-7511128,00410/16151127565712-0065-7511130,00510/16151219080712-0080-7511135,00610/1615126110100712-0100-7511154,00810/1620139125125712-0125-7511154,0091620147140125712-0140-7511162,00121635173160150712-0150-75111
101,00191040195200200712-0200-75110101,00191640195200200712-0200-75111105,00191040203225200712-0225-75110105,00191640203225200712-0225-75111167,00261050224250250712-0250-75110167,00261650224250250712-0250-75111214,00381060258315300712-0300-75110214,00381660258315300712-0300-75111
Fittings
Products for water according to EN12842
EN 12842
1 2007-07-10 11:28 CET
Gross priceEUR
Theoreticalweight kg
PN bar
Lmm
Dmm
DN mm
AVK ref. nos.Type
Series 712/7512
F-KSFlanged spigot forUPVC pipesaccording to EN12842Standard flangedrilling to ISO7005-2,EN1092-2: 1997Epoxy coatedaccording to DIN30677-2 and GSKguide linesDN 50-600
1
28,00410/161266350712-0050-7512135,00410/161297565712-0065-7512135,00510/161409080712-0080-7512140,00710/16155110100712-0100-7512159,00810/16168140125712-0140-7512162,001010/16169160150712-0150-7512195,001610200200200712-0200-7512095,001616200200200712-0200-7512195,001710190225200712-0225-7512095,001716190225200712-0225-75121
194,002210225250250712-0250-75120194,002216225250250712-0250-75121194,002810246280250712-0280-75120194,002816246280250712-0280-75121228,002910233315300712-0300-75120228,002916233315300712-0300-75121566,005210270400400712-0400-75120651,005216270400400712-0400-75121566,005610270450400712-0451-75120651,005616270450400712-0451-75121702,008410320500500712-0500-75120807,008416320500500712-0500-75121
1.693,0011210320630600712-0600-751201.947,0011216320630600712-0600-75121
Gross priceEUR
Theoreticalweight kg
PN bar
Zmm
Ddmm
DN mm
AVK ref. nos.Type
Series 712/0130
MMK-KSDouble socketbend 11.25 forUPVC pipesaccording to EN12842Epoxy coatedaccording to DIN30677-2 andGSK guide linesDN 50-300
1
37,00316206350712-0050-0130137,00416257565712-0065-0130137,00516259080712-0080-0130139,0061630110100712-0100-0130150,0071630125125712-0125-0130152,0091630140125712-0140.0130164,00111630160150712-0150-0130198,00171630200200712-0200-01301
141,00201640225200712-0225-01301251,00281640250250712-0250-01301318,00431655315300712-0300-01301
Fittings
Products for water according to EN12842
EN 12842
2 2007-07-10 11:28 CET
Gross priceEUR
Theoreticalweight kg
PN bar
Zmm
Ddmm
DN mm
AVK ref. nos.Type
Series 712/0230
MMK-KSDouble socketbend 22.5 forUPVC pipesaccording to EN12842Standard flangedrilling to ISO7005-2, EN1092-2: 1997Epoxy coatedaccording to DIN30677-2 andGSK guide linesDN 50-300
1
37,00316206350712-0050-0230137,00416257565712-0065-0230137,00516259080712-0080-0230139,0061630110100712-0100-0230150,0081630125125712-0125-0230152,0081630140125712-0140-0230164,00121635160150712-0150-02301
111,00161640200200712-0200-02301141,00191645225200712-0225-02301251,00271650250250712-0250-02301318,00461685315300712-0300-02301
Gross priceEUR
Theoreticalweight kg
PN bar
Zmm
Ddmm
DN mm
AVK ref. nos.Type
Series 712/0430
MMK-KSDouble socketbend 45 forUPVC pipesaccording to EN12842Standard flangedrilling to ISO7005-2, EN1092-2: 1997Epoxy coated according to DIN 30677-2 andGSK guide linesDN 50-300
1
37,00316406350712-0050-0430137,00416407565712-0065-0430137,00616509080712-0080-0430150,0071660110100712-0100-0430152,0091665125125712-0125-0430159,00111665140125712-0140-0430185,00161670160150712-0150-04301
107,00201670200200712-0200-04301154,00241680225200712-0225-04301251,003516110250250712-0250-04301360,005116135315300712-0300-04301
Fittings
Products for water according to EN12842
EN 12842
3 2007-07-10 11:28 CET
Gross priceEUR
Theoreticalweight kg
PN bar
Zmm
Ddmm
DN mm
AVK ref. nos.Type
Series 712/0630
MMK-KSDouble socketbend 90 forUPVC pipesaccording to EN12842Standard flangedrilling to ISO7005-2, EN1092-2: 1997Epoxy coated according to DIN 30677-2 andGSK guide linesDN 50-300
1
37,00416656350712-0050-0630142,00516757565712-0065-0630176,00616909080712-0080-0630150,0081683110100712-0100-0630174,001016110125125712-0125-0630180,001216110140125712-0140-06301
198,001616130160150712-0150-06301141,002616160200200712-0200-06301184,002716160225200712-0225-06301263,004216185250250712-0250-06301403,005916215315300712-0300-06301
Gross priceEUR
Theoreticalweight kg
PN bar
Zmm
W1mm
Lmm
Ddtmm
Ddmm
AVK ref. nos.Type
Series 712/1030
MMB-KSSocket Tee withsocket branchfor UPVC pipesaccording to EN12842Standard flangedrilling to ISO7005-2, EN1092-2: 1997Epoxy coatedaccording to DIN30677-2 andGSK guide linesDN 63-200
1
33,0041670372536363712-0050-1030142,0061685512807575712-0065-1030138,0061670452646375712-0066-1030153,00716105603199090712-0080-1030149,0081690503027590712-0081-1030143,0081675542916390712-0082-1030167,0091612560348110110712-0100-1030161,009161056233190110712-0101-1030157,00916906031275110712-0102-1030154,00916756029963110712-0103-1030199,00121615072388125125712-0125-1030196,00121612570365110125712-0126-1030180,0010161057034690125712-0127-1030176,001116757031363125712-0129-1030198,00151615076410140140712-0140-1030198,00161615075404125140712-0141-1030196,00131612575379110140712-0142-1030180,0014161057535990140712-0143-10301
132,00181617586452160160712-0150-10301118,00161612586403125160712-0151-10301109,00151612585402110160712-0152-10301106,0015161058538590160712-0153-10301128,00171615085426140160712-0159-10301239,002616240105550200200712-0200-10301214,002916210105520160200712-0201-10301163,002616160105470125200712-0202-10301163,002716160105470110200712-0203-10301163,00251614010545090200712-0204-10301213,002716185105495140200712-0212-10301
Fittings
Products for water according to EN12842
EN 12842
4 2007-07-10 11:28 CET
Gross priceEUR
Theoreticalweight kg
PN bar
Zmm
Lmm
Dd2mm
Dd1mm
AVK ref. nos.Type
Series 712/2030
MMR-KSDouble socketreducer forUPVC pipesaccording to EN12842Standard flangedrilling to ISO7005-2, EN1092-2: 1997Epoxy coatedaccording to DIN30677-2 andGSK guide linesDN 75-250
1
25,00416262127563712-0066-2030131,00516252269063712-0081-2030129,00516222279075712-0082-2030140,007163525211090712-0101-2030137,006163824211075712-0102-2030137,006163324211063712-0103-2030154,0081640275125110712-0126-2030154,007164527512590712-0127-2030154,007165527612575712-0128-2030162,0091640291140125712-0141-2030154,0091640283140110712-0142-2030154,007164528314090712-0143-2030173,00101640302160125712-0151-2030173,00111650304160110712-0152-2030167,0011165530416090712-0153-2030174,00101640310160140712-0159-20301
121,00201670368200160712-0201-20301116,00151675354200125712-0202-20301106,00131685356200110712-0203-20301106,0011169536120090712-0204-20301121,00211670376225160712-0228-20301116,00171675370225140712-0229-20301116,00171680367225125712-0230-20301108,00191684364225110712-0231-20301232,00251680414250200712-0251-20301224,00301690407250160712-0252-20301
Fittings
Products for water according to EN12842
EN 12842
5 2007-07-10 11:28 CET
Designed according to EN 545EN
545
Basic DIN design standard 2007-07-10 11:28 CET
Water
712/0110, FFK, Double flangedbend 11 according to DIN 545
7
712/0210, FFK, Double flangedbend 22 according to DIN 545
7
712/0310, FFK, Double flangedbend 30 according to DIN 545
8
712/0410, FFK, Double flangedbend 45, according to DIN 545
8
712/0610, Q, Double flangedbend 90, according to DIN 545
9
712/1010, T, All flanged Tee,according to DIN 545 serie A
9
712/1110, TT, All flanged Teewith flanged branch
11
712/1510, TT, Flanged Cross withflanged branch
12
712/1610, TT, Flanged Cross withflanged branch
13
712/2210, FFR, Double flangereducer according to DIN 545
13
712/3450, XR, Adaption flangedouble, According to DIN 1092-2
14
712/3550, XR, Reducer flange15
712/3810, X, Blind flange,According to DIN EN 545
16
712/3910, XI, Taped flange, Blindflange with internal thread, BSPthread ½" (15x21)
16
712/4010, FF, Double flange pipe,according to DIN 545
22
712/4110, FF, Double flange pipe,according to DIN 545
23
712/4210, FF, Double flange pipe,according to DIN 545
24
712/4310, FF, Double flange pipe,according to DIN 545
25
712/4410, FF, Double flange pipe,according to DIN 545
25
712/4510, FF, Double flange pipe,according to DIN 545
26
712/4610, FF, Double flange pipe,according to DIN 545
26
712/4810, FF, Double flange pipe,according to DIN 545
27
712/4910, FF, Double flange pipe,according to DIN 545
28
712/5010, FF, Double flange pipe,according to DIN 545
28
712/5110, FF, Double flange pipe,according to DIN 545
29
712/5210, FF, Double flange pipe,according to DIN 545
29
712/5310, FF, Double flange pipe,according to DIN 545
30
712/6010, FF-WP, Flanged pipewith wall sleeve
30
712/6110, FF-WP, Flanged pipewith wall sleeve
31
Designed according to EN 545
EN 545
Basic DIN design standard 2007-07-10 11:28 CET
712/7010, N, Duckfoot bendflanged, according to DIN EN 545
31
712/7513, F, Flanged spigotaccording to DIN 545 series A
32
712/0120, FFK, Double flangedbend with mobile flanges11
32
712/0220, FFK, Double flangedbend 22 with mobile flanges
33
712/0420, FFK, Double flangedbend 45 with mobile flanges
33
712/0620, Q, Double flangedbend 90, with mobile flanges
34
712/1020, T, All flanged Tee, withmobile flanges
34
712/1031, MMA-KS, Socket Teewith mobile flange branch forUPVC pipes according to EN
35
712/2220, FFR, Double flangereducer, with mobile flanges
36
712/4320, FF, Double flange pipewith mobile flanges
37
712/7020, N, Duckfoot bend withmobile flanges
37
712/7520, S, S-piece with mobileflanges
38
712/0140, MMK, Double socketbend 11.25 with Tyton socketsaccording to EN 545 series A
38
712/0240, MMK, Double socketbend 22.5 with Tyton socketsaccording to EN 545 series A
39
712/0340, MMK, Double socketbend 30 with Tyton socketsaccording to DIN 545 series A
39
712/0440, MMK, Double socketbend 45 with Tyton socketsaccording to EN 545 series A
40
712/0640, MMQ, Double socketbend 90 with Tyton socketsaccording to EN 545 series A
40
712/1040, MMB, Tyton socketTee with socket branchaccording to EN 545 series A
41
712/1042, MMA, Tyton SocketTee with flanged branchaccording to EN 545 series A
41
712/2040, MMR, Double socketreducer with Tyton socketaccording to EN 545 series A
43
712/3240, TY-C, Female end capwith Tyton socket
43
712/7014, EN, Duckfoot bendflanged with Tyton socket
44
712/7514, EU, Flanged socketwith Tyton socket according toEN 545 series A
44
712/7540, U, Double sockedcollar with Tyton sockets
45
712/7519, EU, Flanged MecanicalJoint, Socket for DI pipes
45
712/7563, EU, Flanged coupling,non tensile, Mecanical Joint forDI pipes
46
712/0160, MMK, Double socketbend 11.25 Mecanical Joint for DIpipes
46
712/0260, MMK, Double socketbend 22½, Mecanical Joint for DIpipes
47
712/0460, MMK, Double socketbend 45, Mecanical Joint for DIpipes
47
712/0660, MMQ, Double socketbend 90, Mecanical Joint for DIpipes
48
Designed according to EN 545EN
545
Basic DIN design standard 2007-07-10 11:28 CET
712/1060, MMB, Socket Tee,Mecanical Joint for DI pipes
48
712/1061, MMA, Socket Tee withflanged branch, Mecanical Jointfor DI pipes
49
712/2960, MMR, Double socketreducer Mecanical Joint for DIpipes
50
712/3060, EX, Female End Cap,Mecanical Joint for DI pipes
50
712/3141, EX, End Cap,Mecanical Joint for DI pipes
51
712/7060, EN, Duckfoot SocketBend, Mecanical Joint for DIpipes
51
712/7560, U, Double socketMecanical Joint for DI pipes
52
712/7564, EU, Double Flangedcoupling, non tensile, MecanicalJoint for DI pipes
52
78/82, Concrete Wall sleve withpuddle flange
53
Gross priceEUR
Theoreticalweight kg
PN bar
Lmm
DN mm
AVK ref. nos.Type
Series 712/0110
FFKDouble flanged bend 11according to DIN 545Standard flange drilling toISO 7005-2, EN1092-2:1997Epoxy coated according toDIN 30677-2 and GSKguide linesDN 40-600
1
130,00610/169940712-0040-01101140,00710/1610950712-0050-01101140,00910/1612465712-0065-01101112,001010/1611380712-0080-01101127,001210/16115100712-0100-01101193,001510/16111125712-0125-01101206,002010/16113150712-0150-01101339,002910132200712-0200-01100339,002916132200712-0200-01101550,005110165250712-0250-01100550,005116165250712-0250-01101715,008210175300712-0300-01100715,008216175300712-0300-01101785,007910191350712-0350-01100903,007916191350712-0350-01101910,0010110205400712-0400-01100
1.047,0010116205400712-0400-011011.237,0013310135500712-0500-011001.423,0013316135500712-0500-011013.233,0021110174600712-0600-011003.718,0021116174600712-0600-01101
Gross priceEUR
Theoreticalweight kg
PN bar
Lmm
DN mm
AVK ref. nos.Type
Series 712/0210
FFKDouble flanged bend22 according to DIN545Standard flange drillingto ISO 7005-2,EN1092-2: 1997Epoxy coatedaccording to DIN30677-2 and GSKguide linesDN 40-600
1
130,00610/169440712-0040-02101140,00710/1610450712-0050-02101140,00910/1611965712-0065-02101112,001010/1610580712-0080-02101127,001210/16110100712-0100-02101193,001510/16105125712-0125-02101206,002010/16109150712-0150-02101339,002810131200712-0200-02100339,002816131200712-0200-02101512,005110190250712-0250-02100512,005116190250712-0250-02101715,008510210300712-0300-02100715,008516210300712-0300-02101800,008410210350712-0350-02100920,008416210350712-0350-02101963,0011010239400712-0400-02100
1.107,0011016239400712-0400-021011.319,0015010185500712-0500-021001.517,0015016185500712-0500-021013.233,0024810254600712-0600-021003.718,0024816254600712-0600-02101
Fittings
Products for water according to EN545
EN 545
7 2007-07-10 11:28 CET
Gross priceEUR
Theoreticalweight kg
PN bar
Lmm
DN mm
AVK ref. nos.Type
Series 712/0310
FFKDouble flanged bend 30according to DIN 545Standard flange drillingto ISO 7005-2,EN1092-2: 1997Epoxy coated accordingto DIN 30677-2 andGSK guide linesDN 40-600
1
130,00710/1614040712-0040-03101140,00810/1615050712-0050-03101140,001110/1616565712-0065-03101112,001110/1613080712-0080-03101127,001210/16140100712-0100-03101193,001810/16150125712-0125-03101206,002210/16160150712-0150-03101339,003210180200712-0200-03100339,003216180200712-0200-03101506,004710210250712-0250-03100506,004716210250712-0250-03101715,006810255300712-0300-03100715,006816255300712-0300-03101887,008510217350712-0350-03100
1.020,008516217350712-0350-031011.064,0013010324400712-0400-031001.224,0013016324400712-0400-031011.600,0017810273500712-0500-031001.840,0017816273500712-0500-031013.233,0025510279600712-0600-031003.718,0025516279600712-0600-03101
Gross priceEUR
Theoreticalweight kg
PN bar
Lmm
DN mm
AVK ref. nos.Type
Series 712/0410
FFKDouble flanged bend 45according to DIN 545Standard flange drillingto ISO 7005-2,EN1092-2: 1997Epoxy coated accordingto DIN 30677-2 andGSK guide linesDN 40-600
1
130,00610/1614040712-0040-0410184,00810/1615050712-0050-0410198,001010/1616565712-0065-0410179,001010/1613080712-0080-0410190,001210/16140100712-0100-04101
119,001710/16150125712-0125-04101146,001910/16160150712-0150-04101253,003010180200712-0200-04100253,003016180200712-0200-04101387,005910350250712-0250-04100387,005916350250712-0250-04101472,008410400300712-0300-04100472,008416400300712-0300-04101
1.025,009710298350712-0350-041001.179,009716298350712-0350-041011.058,0012710324400712-0400-041001.217,0012716324400712-0400-041011.878,0020710375500712-0500-041002.160,0020716375500712-0500-041013.093,0031210426600712-0600-041003.553,0031216426600712-0600-04101
Fittings
Products for water according to EN545
EN 545
8 2007-07-10 11:28 CET
Gross priceEUR
Theoreticalweight kg
PN bar
Lmm
DN mm
AVK ref. nos.Type
Series 712/0610
QDouble flanged bend 90according to DIN 545Standard flange drilling to ISO 7005-2,EN1092-2: 1997Epoxy coated according to DIN 30677-2 andGSK guide linesDN 40-600
1
52,00610/1614040712-0040-0610159,00810/1615050712-0050-0610171,001010/1616565712-0065-0610179,001010/1616580712-0080-0610190,001310/16180100712-0100-06101
129,001810/16200125712-0125-06101146,002110/16220150712-0150-06101253,003210260200712-0200-06100253,003216260200712-0200-06101387,005410350250712-0250-06100387,005416350250712-0250-06101472,007610400300712-0300-06100472,007616400300712-0300-06101791,0011310450350712-0350-06100910,0011316450350712-0350-06101
1.058,0014810500400712-0400-061001.217,0014816500400712-0400-061011.868,0024810600500712-0500-061002.148,0024816600500712-0500-061013.711,0038110700600712-0600-061004.268,0038116700600712-0600-06101
Gross priceEUR
Theoreticalweight kg
PN bar
Hmm
Lmm
DN2mm
DN mm
AVK ref. nos.Type
Series 712/1010
TAll flanged Teeaccording to DIN 545 serie AStandard flange drilling to ISO 7005-2,EN1092-2: 1997Epoxy coated according to DIN 30677-2 andGSK guide linesDN 40-600
1
79,00910/161402804040712-0040-1010190,001210/161503005050712-0050-1010194,001110/161453004050712-0051-10101
103,001510/161653306565712-0065-10101103,001410/161583305065712-0066-10101123,001310/161533304065712-0067-1010195,001610/161653308080712-0080-1010195,001610/161603306580712-0081-1010188,001510/161603305080712-0082-10101
100,001510/161553304080712-0083-10101105,002010/16180360100100712-0100-10101102,001910/1617536080100712-0101-10101114,001910/1617036065100712-0102-10101102,001810/1617036050100712-0103-10101113,001810/1617036040100712-0104-10101145,002710/16200400125125712-0125-10101137,002610/16195400100125712-0126-10101129,002410/1619040080125712-0127-10101189,002410/1618540065125712-0128-10101137,002310/1618540050125712-0129-10101180,002310/1618540040125712-0130-10101185,003410/16220440150150712-0150-10101175,003310/16215440125150712-0151-10101164,003110/16210440100150712-0152-10101164,003010/1620544080150712-0153-10101262,003010/1620044065150712-0154-10101179,002810/1620044050150712-0155-10101265,005210260520200200712-0200-10100265,005216260520200200712-0200-10101256,004810250520150200712-0201-10100256,004816250520150200712-0201-10101256,004610245520125200712-0202-10100256,004616245520125200712-0202-10101253,004510240520100200712-0203-10100253,004516240520100200712-0203-10101252,00441023552080200712-0204-10100252,00441623552080200712-0204-10101508,008910350700250250712-0250-10100508,008916350700250250712-0250-10101477,008310325700200250712-0251-10100477,008316325700200250712-0251-10101477,007710300700150250712-0252-10100477,007716300700150250712-0252-10101459,007410275700100250712-0254-10100459,007416275700100250712-0254-10101459,00681026570080250712-0255-10100
Fittings
Products for water according to EN545
EN 545
9 2007-07-10 11:28 CET
Gross priceEUR
Theoreticalweight kg
PN bar
Hmm
Lmm
DN2mm
DN mm
AVK ref. nos.Type
Series 712/1010
TAll flanged Teeaccording to DIN 545 serie AStandard flange drilling to ISO 7005-2,EN1092-2: 1997Epoxy coated according to DIN 30677-2 andGSK guide linesDN 40-600
1
459,00681626570080250712-0255-10101600,0012710400800300300712-0300-10100600,0012716400800300300712-0300-10101600,0011710375800250300712-0301-10100600,0011716375800250300712-0301-10101575,0011110350800200300712-0302-10100575,0011116350800200300712-0302-10101569,0010510325800150300712-0303-10100569,0015016325800150300712-0303-10101525,0010210300800100300712-0305-10100525,0010216300800100300712-0305-10101525,001001029080080300712-0306-10100525,001001629080080300712-0306-10101
1.457,0015510425850300350712-0349-101001.676,0015516425850300350712-0349-101011.457,0016510425850350350712-0350-101001.676,0016516425850350350712-0350-101011.457,0014210325850250350712-0352-101001.676,0014216325850250350712-0352-101011.126,0013810325850200350712-0353-101001.296,0013816325850200350712-0353-101011.126,0013410325850150350712-0354-101001.295,0013416325850150350712-0354-101011.118,0013110325850100350712-0356-101001.286,0013116325850100350712-0356-101011.118,001301032585080350712-0357-101001.286,001301632585080350712-0357-101011.622,0020710450900400400712-0400-101001.865,0020716450900400400712-0400-101011.622,0019810450900350400712-0401-101001.865,0019816450900350400712-0401-101011.622,0016010450900300400712-0402-101001.865,0016016450900300400712-0402-101011.622,0017510350900250400712-0403-101001.865,0017516350900250400712-0403-101011.441,0015010350900200400712-0404-101001.657,0015016350900200400712-0404-101011.441,0016810350900150400712-0405-101001.657,0016816350900150400712-0405-101011.433,0016510350900100400712-0407-101001.648,0016516350900100400712-0407-101011.433,001641035090080400712-0408-101001.648,001641635090080400712-0408-101012.458,00326105001000500500712-0500-101002.827,00326165001000500500712-0500-101012.249,00299105001000400500712-0502-101002.586,00299165001000400500712-0502-101012.993,00281105001000300500712-0504-101003.442,00281165001000300500712-0504-101012.230,00269104001000250500712-0505-101002.564,00269164001000250500712-0505-101012.162,00265104001000200500712-0506-101002.486,00265164001000200500712-0506-101012.763,00262104001000150500712-0507-101003.177,00262164001000150500712-0507-101012.115,00259104001000100500712-0509-101002.432,00259164001000100500712-0509-101013.772,00477105501100600600712-0600-101004.338,00477165501100600600712-0600-101013.724,00418105501100400600712-0603-101004.283,00418165501100400600712-0603-101013.724,00402105501100300600712-0605-101004.283,00402165501100300600712-0605-101013.642,00385104501100200600712-0607-101004.188,00385164501100200600712-0607-101013.642,00380104501100100600712-0610-101004.188,00380164501100100600712-0610-10101
Fittings
Products for water according to EN545
EN 545
10 2007-07-10 11:28 CET
Gross priceEUR
Theoreticalweight kg
PN bar
Hmm
Lmm
DN2mm
DN mm
AVK ref. nos.Type
Series 712/1110
TTAll flanged Teewith flangedbranchStandard flangedrilling to ISO7005-2,EN1092-2: 1997Epoxy coatedaccording to DIN30677-2 andGSK guide linesDN 100-600
1
251,002610/16180360100100712-0100-11101474,004010/16220440150150712-0150-11101474,003810/16210440100150712-0152-11101492,005810260520200200712-0200-11100492,005816260520200200712-0200-11101459,005310250520150200712-0201-11100459,005316250520150200712-0201-11101435,004910240520100200712-0203-11100435,004916240520100200712-0203-11101804,008310350700250250712-0250-11100804,008316350700250250712-0250-11101713,009010325700200250712-0251-11100713,009016325700200250712-0251-11101664,007910300700150250712-0252-11100664,007916300700150250712-0252-11101640,007410275700100250712-0254-11100640,007416275700100250712-0254-11101
1.041,0012510400800300300712-0300-111001.041,0012516400800300300712-0300-111011.041,0011610375800250300712-0301-111001.041,0011616375800250300712-0301-11101
951,0011010350800200300712-0302-11100951,0011016350800200300712-0302-11101910,0010610325800150300712-0303-11100910,0010616325800150300712-0303-11101886,0010110300800100300712-0305-11100886,0010116300800100300712-0305-11101
1.622,0021210450900400400712-0400-111001.865,0021216450900400400712-0400-111011.622,0019410450900300400712-0402-111001.865,0019416450900300400712-0402-111011.622,0018010350900250400712-0403-111001.865,0018016350900250400712-0403-111011.542,0017610350900200400712-0404-111001.773,0017616350900200400712-0404-111011.542,0017310350900150400712-0405-111001.773,0017316350900150400712-0405-111011.433,0017010350900100400712-0407-111001.648,0017016350900100400712-0407-111012.458,00331105001000500500712-0500-111002.827,00331165001000500500712-0500-111012.349,00304105001000400500712-0502-111002.701,00304165001000400500712-0502-111012.349,00289105001000300500712-0504-111002.701,00289165001000300500712-0504-111012.239,00273104001000250500712-0505-111002.575,00273164001000250500712-0505-111012.162,00270104001000200500712-0506-111002.486,00270164001000200500712-0506-111012.162,00267104001000150500712-0507-111002.486,00267164001000150500712-0507-111012.115,00264104001000100500712-0509-111002.432,00264164001000100500712-0509-111013.772,00482105501100600600712-0600-111004.338,00482165501100600600712-0600-111013.724,00423105501100400600712-0603-111004.283,00423165501100400600712-0603-111013.724,00406105501100300600712-0605-111004.283,00406165501100300600712-0605-111013.642,00390104501100200600712-0607-111004.188,00390164501100200600712-0607-111013.642,00385104501100100600712-0610-111004.188,00385164501100100600712-0610-11101
Fittings
Products for water according to EN545
EN 545
11 2007-07-10 11:28 CET
Gross priceEUR
Theoreticalweight kg
PN bar
Hmm
Lmm
DN2mm
DN mm
AVK ref. nos.Type
Series 712/1510
TTFlanged Cross withflanged branchStandard flange drillingto ISO 7005-2,EN1092-2: 1997Epoxy coated accordingto DIN 30677-2 andGSK guide linesDN 80-600
1
226,002310/161653308080712-0080-15101251,002710/16180360100100712-0100-15101240,002410/1617536080100712-0101-15101402,003510/16200400125125712-0125-15101474,004510/16220440150150712-0150-15101474,003610/16210440100150712-0152-15101625,006710260520200200712-0200-15100625,006716260520200200712-0200-15101625,005710250520150200712-0201-15100625,005716250520150200712-0201-15101625,005110240520100200712-0203-15100625,005116240520100200712-0203-15101
1.139,0011010350700250250712-0250-151001.139,0011016350700250250712-0250-151011.139,009310325700200250712-0251-151001.139,009316325700200250712-0251-151011.139,008310300700150250712-0252-151001.139,008316300700150250712-0252-151011.139,007510275700100250712-0254-151001.139,007516275700100250712-0254-151011.576,0014910400800300300712-0300-151001.576,0014916400800300300712-0300-151011.576,0013210375800250300712-0301-151001.576,0013216375800250300712-0301-151011.576,0011810350800200300712-0302-151001.576,0011816350800200300712-0302-151011.576,0010910325800150300712-0303-151001.576,0010916325800150300712-0303-151011.576,0010210300800100300712-0305-151001.576,0010216300800100300712-0305-151012.461,0025710450900400400712-0400-151002.461,0025716450900400400712-0400-151012.796,00400105001000500500712-0500-151002.796,00400165001000500500712-0500-151015.125,00579105501100600600712-0600-151005.125,00579165501100600600712-0600-15101
Fittings
Products for water according to EN545
EN 545
12 2007-07-10 11:28 CET
Gross priceEUR
Theoreticalweight kg
PN bar
Hmm
Lmm
DN2mm
DN mm
AVK ref. nos.Type
Series 712/1610
TTFlanged Cross withflanged branchStandard flangedrilling to ISO7005-2, EN1092-2:1997Epoxy coatedaccording to DIN30677-2 and GSKguide linesDN 100-600
1
287,003010/16180360100100712-0100-16101402,004010/16200400125125712-0125-16101474,005010/16220440150150712-0150-16101474,004210/16210440100150712-0152-16101625,007310260520200200712-0200-16100625,007316260520200200712-0200-16101625,006310250520150200712-0201-16100625,006316250520150200712-0201-16101625,006310240520100200712-0203-16100625,006316240520100200712-0203-16101
1.139,0011210350700250250712-0250-161001.139,0011216350700250250712-0250-161011.139,009810325700200250712-0251-161001.139,009816325700200250712-0251-161011.139,008810300700150250712-0252-161001.139,008816300700150250712-0252-161011.139,008010275700100250712-0254-161001.139,008016275700100250712-0254-161011.576,0015510400800300300712-0300-161001.576,0015516400800300300712-0300-161011.576,0013710375800250300712-0301-161001.576,0013716375800250300712-0301-161011.576,0012410350800200300712-0302-161001.576,0012416350800200300712-0302-161011.576,0011410325800150300712-0303-161001.576,0011416325800150300712-0303-161011.576,0010710300800100300712-0305-161001.576,0010716300800100300712-0305-161012.461,0026210450900400400712-0400-161002.830,0026216450900400400712-0400-161012.878,00405105001000500500712-0500-161003.310,00405165001000500500712-0500-161015.207,00587105501100600600712-0600-161005.988,00587165501100600600712-0600-16101
Gross priceEUR
Theoreticalweight kg
PN bar
Lmm
DN2mm
DN mm
AVK ref. nos.Type
Series 712/2210
FFRDouble flangereduceraccording to DIN545Standard flangedrilling to ISO7005-2,EN1092-2: 1997Epoxy coatedaccording to DIN30677-2 andGSK guide linesDN 50-600
1
64,00610/162004050712-0051-2210172,00810/162005065712-0066-2210171,00710/162004065712-0067-2210163,00910/162006580712-0081-2210163,00810/162005080712-0082-2210163,00810/162004080712-0083-2210164,001010/1620080100712-0101-2210164,001010/1620065100712-0102-2210163,001010/1620050100712-0103-2210166,00910/1620040100712-0104-2210181,001310/16200100125712-0126-2210178,001210/1620080125712-0127-22101
100,001610/16200125150712-0151-2210194,001510/16200100150712-0152-2210193,001510/1620080150712-0153-2210187,001610/1632065150712-0154-2210185,001510/1634150150712-0155-22101
145,002410300150200712-0201-22100145,002416300150200712-0201-22101143,002210300125200712-0202-22100143,002216300125200712-0202-22101132,001610300100200712-0203-22100132,001616300100200712-0203-22101132,00191030080200712-0204-22100132,00191630080200712-0204-22101222,003310300200250712-0251-22100222,003316300200250712-0251-22101222,003310300150250712-0252-22100222,003316300150250712-0252-22101222,002910300125250712-0253-22100222,002916300125250712-0253-22101222,002810300100250712-0254-22100222,002816300100250712-0254-22101277,004410300250300712-0301-22100
Fittings
Products for water according to EN545
EN 545
13 2007-07-10 11:28 CET
Gross priceEUR
Theoreticalweight kg
PN bar
Lmm
DN2mm
DN mm
AVK ref. nos.Type
Series 712/2210
FFRDouble flangereduceraccording to DIN545Standard flangedrilling to ISO7005-2,EN1092-2: 1997Epoxy coatedaccording to DIN30677-2 andGSK guide linesDN 50-600
1
277,004416300250300712-0301-22101271,003910300200300712-0302-22100271,003916300200300712-0302-22101271,003710300150300712-0303-22100271,003716300150300712-0303-22101271,003110300100300712-0305-22100271,003116300100300712-0305-22101482,005710300300350712-0349-22100554,005716300300350712-0349-22101554,006010300250350712-0352-22100554,006016300250350712-0352-22101734,005410300200350712-0353-22100734,005416300200350712-0353-22101424,005010300150350712-0354-22100424,005016300150350712-0354-22101565,008510300350400712-0401-22100650,008516300350400712-0401-22101551,007610300300400712-0402-22100634,007616300300400712-0402-22101551,006910300250400712-0403-22100634,006916300250400712-0403-22101541,006210300200400712-0404-22100622,006216300200400712-0404-22101841,0010610300400450712-0451-22100967,0010616300400450712-0451-22101812,008810300300450712-0453-22100934,008816300300450712-0453-22101
1.188,0016210600400500712-0502-221001.366,0016216600400500712-0502-221011.188,0015310600350500712-0503-221001.366,0015316600350500712-0503-221011.188,0014310600300500712-0504-221001.366,0014316600300500712-0504-221011.825,0025210600500600712-0601-221002.099,0025216600500600712-0601-221011.825,0021810600400600712-0603-221002.099,0021816600400600712-0603-22101
Gross priceEUR
Theoreticalweight kg
PN bar
Dh2mm
Dhmm
Dmm
DN mm
AVK ref. nos.Type
Series 712/3450
XRAdaption flangedoubleAccording to DIN1092-2Standard flangedrilling to ISO 7005-2,EN1092-2: 1997Epoxy coatedaccording to DIN30677-2 and GSKguide linesDN 80-200
Note:# Bolts standard zinc coated steel 8.8.
Optional SS A2 or A4
1
44,00910/1616016020080712-0080-34502061 #)171,001810/16295295340200712-0200-34500061 #)
Fittings
Products for water according to EN545
EN 545
14 2007-07-10 11:28 CET
Gross priceEUR
Theoreticalweight kg
PN bar
Dh2mm
Dhmm
Dmm
DN/DNmm
AVK ref. nos.Type
Series 712/3550
XRReducer flangeStandard flangedrilling to ISO 7005-2,EN1092-2: 1997Epoxy coatedaccording to DIN30677-2 and GSKguide linesDN 60-300
Note:# Bolts standard zinc
coated steel 8.8.Optional SS A2 orA4
1
68,00610/1612513518550-60712-0061-35501061 #)59,00510/1611013518540-60712-0062-35501061 #)68,00610/1612514518550-65712-0066-35501061 #)59,00510/1611014518540-65712-0067-35501061 #)77,00510/1614516020065-80712-0081-35501061 #)72,00610/1614516020065-80712-0081-35502061 #)81,00610/1612516020050-80712-0082-35501061 #)68,00610/1612516020050-80712-0082-35502061 #)60,00510/1611016020040-80712-0083-35501061 #)54,00510/1611016020040-80712-0083-35502061 #)77,00510/1612516020060-80712-0086-35501061 #)72,00610/1612516020060-80712-0086-35502061 #)72,00810/1616018022080-100712-0101-35501061 #)72,00810/1616018022080-100712-0101-35502061 #)72,00610/1614518022065-100712-0102-35501061 #)54,00510/1611018022040-100712-0104-35501060 #)72,00610/1613518022060-100712-0107-35501061 #)
108,00910/16160210250100-125712-0126-35501061 #)95,00810/1616021025080-125712-0127-35501061 #)95,00810/1616021025080-125712-0127-35502061 #)72,00710/1614521025065-125712-0128-35501061 #)72,00710/1613521025060-125712-0133-35501061 #)
149,001210/16210240285125-150712-0151-35501061 #)113,00910/16180240285100-150712-0152-35501061 #)95,00910/1614524028580-150712-0153-35501060 #)90,00810/1616024028580-150712-0153-35502060 #)90,00910/1613524028565-150712-0154-35501060 #)90,00910/1618024028560-150712-0157-35501060 #)
167,001510240295340150-200712-0201-35500061 #)167,001516240295340150-200712-0201-35501061 #)153,001210210295340125-200712-0202-35500060 #)153,001216210295340125-200712-0202-35501060 #)144,001310180295340100-200712-0203-35500060 #)144,001316180295340100-200712-0203-35501060 #)144,00131016029534080-200712-0204-35500060 #)144,00131616029534080-200712-0204-35501060 #)140,00131616029534080-200712-0204-35502060 #)140,00131016029534080-200712-0204-35504060 #)140,00141014529534065-200712-0205-35500060 #)140,00141614529534065-200712-0205-35501060 #)140,00131013529534060-200712-0210-35500060 #)140,00131613529534060-200712-0210-35501060 #)244,002410295350405200-250712-0251-35500061 #)244,002416295350405200-250712-0251-35501061 #)203,002010240350405150-250712-0252-35500060 #)203,002016240350405150-250712-0252-35501060 #)307,003110350400460250-300712-0301-35500061 #)307,003116350400460250-300712-0301-35501061 #)231,002310295400460200-300712-0302-35500060 #)231,002316295400460200-300712-0302-35501060 #)
Fittings
Products for water according to EN545
EN 545
15 2007-07-10 11:28 CET
Gross priceEUR
Theoreticalweight kg
PN bar
Dmm
Lmm
DN mm
AVK ref. nos.Type
Series 712/3810
XBlind flangeAccording to DIN EN545Standard flange drillingto ISO 7005-2,EN1092-2: 1997Epoxy coated accordingto DIN 30677-2 andGSK guide linesDN 40-600
1
16,00210/161501940712-0040-3810116,00310/161651950712-0050-3810120,00310/161751960712-0060-3810120,00310/161851965712-0065-3810120,00410/162001980712-0080-3810124,00510/1622019100712-0100-3810135,00610/1625019125712-0125-3810144,00810/1628519150712-0150-3810163,00111034020200712-0200-3810063,00111634020200712-0200-38101
120,00171040022250712-0250-38100120,00171640022250712-0250-38101160,00241045525300712-0300-38100160,00241645525300712-0300-38101360,00461056525400712-0400-38100360,00481658025400712-0400-38101496,00611067027500712-0500-38100496,00771671532500712-0500-38101672,00911078030600712-0600-38100672,001201684036600712-0600-38101
Gross priceEUR
Theoreticalweight kg
PN bar
Dmm
DN mm
AVK ref. nos.Type
Series 712/3910
XITaped flangeBlind flange withinternal threadBSP thread ½"(15x21)Standard flangedrilling to ISO 7005-2,EN1092-2: 1997Epoxy coatedaccording to DIN30677-2 and GSKguide linesDN 40-600
Note:# BSP thread ½" (15x21)
01
28,00210/1615040712-0040-39101005 #)29,00310/1616550712-0050-39101005 #)33,00310/1617560712-0060-39101005 #)33,00310/1618565712-0065-39101005 #)32,00410/1620080712-0080-39101005 #)37,00510/16220100712-0100-39101005 #)46,00610/16250125712-0125-39101005 #)56,00810/16285150712-0150-39101005 #)72,001110340200712-0200-39100005 #)72,001116340200712-0200-39101005 #)
133,001710400250712-0250-39100005 #)133,001716400250712-0250-39101005 #)173,002410455300712-0300-39100005 #)173,002416455300712-0300-39101005 #)373,004810580400712-0400-39100005 #)373,004816580400712-0400-39101005 #)509,007710780500712-0500-39100005 #)509,007716780500712-0500-39101005 #)686,0012010840600712-0600-39100005 #)686,0012016840600712-0600-39101005 #)
Fittings
Products for water according to EN545
EN 545
16 2007-07-10 11:28 CET
Gross priceEUR
Theoreticalweight kg
PN bar
Dmm
DN mm
AVK ref. nos.Type
Series 712/3910
XITaped flangeBlind flange withinternal threadBSP thread ½"(15x21)Standard flangedrilling to ISO 7005-2,EN1092-2: 1997Epoxy coatedaccording to DIN30677-2 and GSKguide linesDN 40-600
Note:# BSP thread 3/4" (20x27)
05
28,00210/1615040712-0040-39101075 #)29,00310/1616550712-0050-39101075 #)33,00310/1617560712-0060-39101075 #)33,00310/1618565712-0065-39101075 #)32,00410/1620080712-0080-39101075 #)37,00510/16220100712-0100-39101075 #)46,00610/16250125712-0125-39101075 #)56,00810/16285150712-0150-39101075 #)72,001110340200712-0200-39100075 #)72,001116340200712-0200-39101075 #)
133,001710400250712-0250-39100075 #)133,001716400250712-0250-39101075 #)173,002410455300712-0300-39100075 #)173,002416455300712-0300-39101075 #)373,004810580400712-0400-39100075 #)373,004816580400712-0400-39101075 #)509,007710780500712-0500-39100075 #)509,007716780500712-0500-39101075 #)686,0012010840600712-0600-39100075 #)686,0012016840600712-0600-39101075 #)
Gross priceEUR
Theoreticalweight kg
PN bar
Dmm
DN mm
AVK ref. nos.Type
Series 712/3910
XITaped flangeBlind flange withinternal threadBSP thread ½"(15x21)Standard flangedrilling to ISO 7005-2,EN1092-2: 1997Epoxy coatedaccording to DIN30677-2 and GSKguide linesDN 40-600
Note:# BSP thread 1" (26x34)
10
28,00210/1615040712-0040-39101010 #)29,00310/1616550712-0050-39101010 #)33,00310/1617560712-0060-39101010 #)33,00310/1618565712-0065-39101010 #)32,00410/1620080712-0080-39101010 #)37,00510/16220100712-0100-39101010 #)46,00610/16250125712-0125-39101010 #)56,00810/16285150712-0150-39101010 #)72,001110340200712-0200-39100010 #)72,001116340200712-0200-39101010 #)
133,001710400250712-0250-39100010 #)133,001716400250712-0250-39101010 #)173,002410455300712-0300-39100010 #)173,002416455300712-0300-39101010 #)373,004810580400712-0400-39100010 #)373,004816580400712-0400-39101010 #)509,007710780500712-0500-39100010 #)509,007716780500712-0500-39101010 #)686,0012010840600712-0600-39100010 #)686,0012016840600712-0600-39101010 #)
Fittings
Products for water according to EN545
EN 545
17 2007-07-10 11:28 CET
Gross priceEUR
Theoreticalweight kg
PN bar
Dmm
DN mm
AVK ref. nos.Type
Series 712/3910
XITaped flangeBlind flange withinternal threadBSP thread ½"(15x21)Standard flangedrilling to ISO 7005-2,EN1092-2: 1997Epoxy coatedaccording to DIN30677-2 and GSKguide linesDN 60-600
Note:# BSP thread 1.1/4" (33x42)
15
48,00310/1617560712-0060-39101015 #)48,00310/1618565712-0065-39101015 #)47,00410/1620080712-0080-39101015 #)52,00410/16220100712-0100-39101015 #)61,00610/16250125712-0125-39101015 #)71,00810/16285150712-0150-39101015 #)87,001110340200712-0200-39100015 #)87,001116340200712-0200-39101015 #)
148,001710400250712-0250-39100015 #)148,001716400250712-0250-39101015 #)188,002410455300712-0300-39100015 #)188,002416455300712-0300-39101015 #)388,004810580400712-0400-39100015 #)388,004816580400712-0400-39101015 #)524,007710780500712-0500-39100015 #)524,007716780500712-0500-39101015 #)701,0012010840600712-0600-39100015 #)701,0012016840600712-0600-39101015 #)
Gross priceEUR
Theoreticalweight kg
PN bar
Dmm
DN mm
AVK ref. nos.Type
Series 712/3910
XITaped flangeBlind flange withinternal threadBSP thread ½"(15x21)Standard flangedrilling to ISO 7005-2,EN1092-2: 1997Epoxy coatedaccording to DIN30677-2 and GSKguide linesDN 50-600
Note:# BSP thread 1½" (40x49)
20
44,00310/1616550712-0050-39101012 #)48,00310/1617560712-0060-39101012 #)48,00310/1618565712-0065-39101012 #)47,00410/1620080712-0080-39101012 #)52,00510/16220100712-0100-39101012 #)61,00610/16250125712-0125-39101012 #)71,00810/16285150712-0150-39101012 #)87,001110340200712-0200-39100012 #)87,001116340200712-0200-39101012 #)
148,001710400250712-0250-39100012 #)148,001716400250712-0250-39101012 #)188,002410455300712-0300-39100012 #)188,002416455300712-0300-39101012 #)388,004810580400712-0400-39100012 #)388,004816580400712-0400-39101012 #)524,007710780500712-0500-39100012 #)524,007716780500712-0500-39101012 #)701,0012010840600712-0600-39100012 #)701,0012016840600712-0600-39101012 #)
Fittings
Products for water according to EN545
EN 545
18 2007-07-10 11:28 CET
Gross priceEUR
Theoreticalweight kg
PN bar
Dmm
DN mm
AVK ref. nos.Type
Series 712/3910
XITaped flangeBlind flange withinternal threadBSP thread ½"(15x21)Standard flangedrilling to ISO 7005-2,EN1092-2: 1997Epoxy coatedaccording to DIN30677-2 and GSKguide linesDN 60-600
Note:# BSP thread 2" (50x60)
25
48,00310/1617560712-0060-39101020 #)48,00310/1618565712-0065-39101020 #)47,00410/1620080712-0080-39101020 #)52,00510/16220100712-0100-39101020 #)61,00610/16250125712-0125-39101020 #)71,00810/16285150712-0150-39101020 #)87,001110340200712-0200-39100020 #)87,001116340200712-0200-39101020 #)
148,001710400250712-0250-39100020 #)148,001716400250712-0250-39101020 #)188,002410455300712-0300-39100020 #)188,002416455300712-0300-39101020 #)388,004810580400712-0400-39100020 #)388,004816580400712-0400-39101020 #)524,007710780500712-0500-39100020 #)524,007716780500712-0500-39101020 #)701,0012010840600712-0600-39100020 #)701,0012016840600712-0600-39101020 #)
Gross priceEUR
Theoreticalweight kg
PN bar
Dmm
DN mm
AVK ref. nos.Type
Series 712/3910
XITaped flangeBlind flange withinternal threadBSP thread ½"(15x21)Standard flangedrilling to ISO 7005-2,EN1092-2: 1997Epoxy coatedaccording to DIN30677-2 and GSKguide linesDN 80-600
Note:# BSP thread 2½" (66x76)
30
47,00410/1620080712-0080-39101025 #)52,00510/16220100712-0100-39101025 #)61,00610/16250125712-0125-39101025 #)71,00810/16285150712-0150-39101025 #)87,001110340200712-0200-39100025 #)87,001116340200712-0200-39101025 #)
148,001710400250712-0250-39100025 #)148,001716400250712-0250-39101025 #)188,002410455300712-0300-39100025 #)188,002416455300712-0300-39101025 #)388,004810580400712-0400-39100025 #)388,004816580400712-0400-39101025 #)524,007710780500712-0500-39100025 #)524,007716780500712-0500-39101025 #)701,0012010840600712-0600-39100025 #)701,0012016840600712-0600-39101025 #)
Fittings
Products for water according to EN545
EN 545
19 2007-07-10 11:28 CET
Gross priceEUR
Theoreticalweight kg
PN bar
Dmm
DN mm
AVK ref. nos.Type
Series 712/3910
XITaped flangeBlind flange withinternal threadBSP thread ½"(15x21)Standard flangedrilling to ISO 7005-2,EN1092-2: 1997Epoxy coatedaccording to DIN30677-2 and GSKguide linesDN 100-600
Note:# BSP thread 3" (80x90)
35
52,00510/16220100712-0100-39101030 #)61,00610/16250125712-0125-39101030 #)71,00810/16285150712-0150-39101030 #)87,001110340200712-0200-39100030 #)87,001116340200712-0200-39101030 #)
148,001710400250712-0250-39100030 #)148,001716400250712-0250-39101030 #)188,002410455300712-0300-39100030 #)188,002416455300712-0300-39101030 #)388,004810580400712-0400-39100030 #)388,004816580400712-0400-39101030 #)524,007710780500712-0500-39100030 #)524,007716780500712-0500-39101030 #)701,0012010840600712-0600-39100030 #)701,0012016840600712-0600-39101030 #)
Gross priceEUR
Theoreticalweight kg
PN bar
Dmm
DN mm
AVK ref. nos.Type
Series 712/3910
XITaped flangeBlind flange withinternal threadBSP thread ½"(15x21)Standard flangedrilling to ISO 7005-2,EN1092-2: 1997Epoxy coatedaccording to DIN30677-2 and GSKguide linesDN 125-600
Note:# BSP thread 4" (102x114)
40
61,00610/16250125712-0125-39101041 #)71,00810/16285150712-0150-39101041 #)87,001110340200712-0200-39100041 #)87,001116340200712-0200-39101041 #)
148,001710400250712-0250-39100041 #)148,001716400250712-0250-39101041 #)188,002410455300712-0300-39100041 #)188,002416455300712-0300-39101041 #)388,004810580400712-0400-39100041 #)388,004816580400712-0400-39101041 #)524,007710780500712-0500-39100041 #)524,007716780500712-0500-39101041 #)701,0012010840600712-0600-39100041 #)701,0012016840600712-0600-39101041 #)
Fittings
Products for water according to EN545
EN 545
20 2007-07-10 11:28 CET
Gross priceEUR
Theoreticalweight kg
PN bar
Dmm
DN mm
AVK ref. nos.Type
Series 712/3910
XITaped flangeBlind flange withinternal threadBSP thread ½"(15x21)Standard flangedrilling to ISO 7005-2,EN1092-2: 1997Epoxy coatedaccording to DIN30677-2 and GSKguide linesDN 50-600
Note:# PB thread (40x300)
45
37,00310/1616550712-0050-39101040 #)39,00310/1617560712-0060-39101040 #)39,00310/1618565712-0065-39101040 #)47,00410/1620080712-0080-39101040 #)52,00510/16220100712-0100-39101040 #)61,00610/16250125712-0125-39101040 #)71,00810/16285150712-0150-39101040 #)87,001110340200712-0200-39100040 #)87,001116340200712-0200-39101040 #)
148,001710400250712-0250-39100040 #)148,001716400250712-0250-39101040 #)188,002410455300712-0300-39100040 #)188,002416455300712-0300-39101040 #)388,004810580400712-0400-39100040 #)388,004816580400712-0400-39101040 #)524,007710780500712-0500-39100040 #)524,007716780500712-0500-39101040 #)701,0012010840600712-0600-39100040 #)701,0012016840600712-0600-39101040 #)
Gross priceEUR
Theoreticalweight kg
PN bar
Dmm
DN mm
AVK ref. nos.Type
Series 712/3910
XITaped flangeBlind flange withinternal threadBSP thread ½"(15x21)Standard flangedrilling to ISO 7005-2,EN1092-2: 1997Epoxy coatedaccording to DIN30677-2 and GSKguide linesDN 60-600
Note:# GB thread (55x300)
50
39,00310/1617560712-0060-39101055 #)39,00310/1618565712-0065-39101055 #)47,00410/1620080712-0080-39101055 #)52,00510/16220100712-0100-39101055 #)61,00610/16250125712-0125-39101055 #)71,00810/16285150712-0150-39101055 #)87,001110340200712-020039100055 #)87,001116340200712-0200-39101055 #)
148,001710400250712-0250-39100055 #)148,001716400250712-0250-39101055 #)188,002410455300712-0300-39100055 #)188,002416455300712-0300-39101055 #)388,004810580400712-0400-39100055 #)388,004816580400712-0400-39101055 #)524,007710780500712-0500-39100055 #)524,007716780500712-0500-39101055 #)701,0012010840600712-060039100055 #)701,0012016840600712-0600-39101055 #)
Fittings
Products for water according to EN545
EN 545
21 2007-07-10 11:28 CET
Gross priceEUR
Theoreticalweight kg
PN bar
Lmm
DN mm
AVK ref. nos.Type
Series 712/4010
FFDouble flange pipeaccording to DIN545Standard flangedrilling to ISO7005-2,EN1092-2: 1997Epoxy coatedaccording to DIN30677-2 and GSKguide linesDN 50-300
1
69,00610/1610050712-0050-4010169,00710/1610060712-0060-4010169,00710/1610065712-0065-4010161,00810/1610080712-0080-4010170,00910/16100100712-0100-40101
102,001210/16100125712-0125-40101109,001410/16100150712-0150-40101136,002110100200712-0200-40100136,002116100200712-0200-40101165,002710100250712-0250-40100165,002716100250712-0250-40101225,003710100300712-0300-40100225,003716100300712-0300-40101
Gross priceEUR
Theoreticalweight kg
PN bar
Lmm
DN mm
AVK ref. nos.Type
Series 712/4010
FFDouble flange pipeaccording to DIN545Standard flangedrilling to ISO7005-2,EN1092-2: 1997Epoxy coatedaccording to DIN30677-2 and GSKguide linesDN 80
2
61,00710/1610080712-0080-40103
Fittings
Products for water according to EN545
EN 545
22 2007-07-10 11:28 CET
Gross priceEUR
Theoreticalweight kg
PN bar
Lmm
DN mm
AVK ref. nos.Type
Series 712/4110
FFDouble flange pipeaccording to DIN545Standard flangedrilling to ISO7005-2,EN1092-2: 1997Epoxy coatedaccording to DIN30677-2 and GSKguide linesDN 50-300
1
69,00610/1615050712-0050-4110169,00810/1615060712-0060-4110169,00810/1615065712-0065-4110161,00810/1615080712-0080-4110170,001010/16150100712-0100-41101
102,001310/16150125712-0125-41101109,001510/16150150712-0150-41101143,002210150200712-0200-41100143,002216150200712-0200-41101172,003110150250712-0250-41100172,003116150250712-0250-41101255,004110150300712-0300-41100255,004116150300712-0300-41101
Gross priceEUR
Theoreticalweight kg
PN bar
Lmm
DN mm
AVK ref. nos.Type
Series 712/4110
FFDouble flange pipeaccording to DIN545Standard flangedrilling to ISO7005-2,EN1092-2: 1997Epoxy coatedaccording to DIN30677-2 and GSKguide linesDN 100-200
2
69,00910/16150100712-0100-41103100,001210/16150125712-0125-41103102,001410/16150150712-0150-41103143,001916150200712-0200-41103
Fittings
Products for water according to EN545
EN 545
23 2007-07-10 11:28 CET
Gross priceEUR
Theoreticalweight kg
PN bar
Lmm
DN mm
AVK ref. nos.Type
Series 712/4210
FFDouble flange pipeaccording to DIN545Standard flangedrilling to ISO7005-2,EN1092-2: 1997Epoxy coatedaccording to DIN30677-2 and GSKguide linesDN 50-300
1
72,00710/1620050712-0050-4210180,00910/1620065712-0065-4210182,00910/1620080712-0080-4210190,001110/16200100712-0100-42101
131,001510/16200125712-0125-42101148,001610/16200150712-0150-42101168,002610200200712-0200-42100168,002616200200712-0200-42101234,003310200250712-0250-42100234,003316200250712-0250-42101340,004410200300712-0300-42100340,004416200300712-0300-42101
Gross priceEUR
Theoreticalweight kg
PN bar
Lmm
DN mm
AVK ref. nos.Type
Series 712/4210
FFDouble flange pipeaccording to DIN545Standard flangedrilling to ISO7005-2, EN1092-2: 1997Epoxy coatedaccording to DIN30677-2 and GSKguide linesDN 250
2
206,002916200250712-0250-42103
Fittings
Products for water according to EN545
EN 545
24 2007-07-10 11:28 CET
Gross priceEUR
Theoreticalweight kg
PN bar
Lmm
DN mm
AVK ref. nos.Type
Series 712/4310
FFDouble flange pipeaccording to DIN545Standard flangedrilling to ISO7005-2,EN1092-2: 1997Epoxy coatedaccording to DIN30677-2 and GSKguide linesDN 50-300
1
72,00810/1625050712-0050-4310196,00910/1625065712-0065-4310168,001010/1625080712-0080-4310182,001210/16250100712-0100-43101
111,001610/16250125712-0125-43101129,001810/16250150712-0150-43101160,002510250200712-0200-43100160,002516250200712-0200-43101246,003510250250712-0250-43100246,003516250250712-0250-43101279,004610250300712-0300-43100279,004616250300712-0300-43101
Gross priceEUR
Theoreticalweight kg
PN bar
Lmm
DN mm
AVK ref. nos.Type
Series 712/4410
FFDouble flange pipeaccording to DIN545Standard flangedrilling to ISO7005-2,EN1092-2: 1997Epoxy coatedaccording to DIN30677-2 and GSKguide linesDN 50-300
1
70,00810/1630050712-0050-4410176,001010/1630065712-0065-4410168,001110/1630080712-0080-4410182,001110/16300100712-0100-44101
111,001710/16300125712-0125-44101129,001910/16300150712-0150-44101160,002710300200712-0200-44100160,002716300200712-0200-44101223,003810300250712-0250-44100223,003816300250712-0250-44101279,005010300300712-0300-44100279,005016300300712-0300-44101
Fittings
Products for water according to EN545
EN 545
25 2007-07-10 11:28 CET
Gross priceEUR
Theoreticalweight kg
PN bar
Lmm
DN mm
AVK ref. nos.Type
Series 712/4510
FFDouble flange pipeaccording to DIN545Standard flangedrilling to ISO7005-2,EN1092-2: 1997Epoxy coatedaccording to DIN30677-2 and GSKguide linesDN 80-600
1
90,001110/1635080712-0080-45101106,001410/16350100712-0100-45101163,001810/16350125712-0125-45101166,002110/16350150712-0150-45101223,002810350200712-0200-45100223,002816350200712-0200-45101310,004010350250712-0250-45100310,004016350250712-0250-45101410,005310350300712-0300-45100410,005316350300712-0300-45101536,007610350350712-0350-45100616,007616350350712-0350-45101837,009410350400712-0400-45100964,009416350400712-0400-45101837,0012510350450712-0450-45100964,0012516350450712-0450-45101919,0014710350500712-0500-45100
1.057,0014716350500712-0500-451011.245,0021210350600712-0600-451001.432,0021216350600712-0600-45101
Gross priceEUR
Theoreticalweight kg
PN bar
Lmm
DN mm
AVK ref. nos.Type
Series 712/4610
FFDouble flange pipeaccording to DIN545Standard flangedrilling to ISO7005-2,EN1092-2: 1997Epoxy coatedaccording to DIN30677-2 and GSKguide linesDN 50-600
1
86,00910/1640050712-0050-4610186,001110/1640065712-0065-4610190,001310/1640080712-0080-46101
106,001410/16400100712-0100-46101149,001910/16400125712-0125-46101151,002210/16400150712-0150-46101204,003210400200712-0200-46100204,003216400200712-0200-46101281,004210400250712-0250-46100281,004216400250712-0250-46101410,005710400300712-0300-46100410,005716400300712-0300-46101568,008010400350712-0350-46100653,008016400350712-0350-46101837,0010010400400712-0400-46100963,0010016400400712-0400-46101886,0013210400450712-0450-46100
1.019,0013216400450712-0450-461011.168,0015510400500712-0500-461001.343,0015516400500712-0500-461011.316,0022310400600712-0600-461001.513,0022316400600712-0600-46101
Fittings
Products for water according to EN545
EN 545
26 2007-07-10 11:28 CET
Gross priceEUR
Theoreticalweight kg
PN bar
Lmm
DN mm
AVK ref. nos.Type
Series 712/4810
FFDouble flange pipeaccording to DIN545Standard flangedrilling to ISO7005-2,EN1092-2: 1997Epoxy coatedaccording to DIN30677-2 and GSKguide linesDN 50-600
1
86,001010/1650050712-0050-4810196,001210/1650065712-0065-4810190,001410/1650080712-0080-48101
106,001710/16500100712-0100-48101149,002210/16500125712-0125-48101151,002610/16500150712-0150-48101204,003410500200712-0200-48100204,003416500200712-0200-48101281,005010500250712-0250-48100281,005016500250712-0250-48101410,006510500300712-0300-48100410,006516500300712-0300-48101625,009010500350712-0350-48100719,009016500350712-0350-48101837,0011210500400712-0400-48100963,0011216500400712-0400-48101873,0014610500450712-0450-48100
1.004,0014616500450712-0450-481011.082,0017110500500712-0500-481001.245,0017116500500712-0500-481011.452,0024410500600712-0600-481001.669,0024416500600712-0600-48101
Gross priceEUR
Theoreticalweight kg
PN bar
Lmm
DN mm
AVK ref. nos.Type
Series 712/4810
FFDouble flange pipeaccording to DIN545Standard flangedrilling to ISO7005-2, EN1092-2: 1997Epoxy coatedaccording to DIN30677-2 and GSKguide linesDN 300-400
2
410,005916500300712-0300-48103963,008516500400712-0400-48103
Fittings
Products for water according to EN545
EN 545
27 2007-07-10 11:28 CET
Gross priceEUR
Theoreticalweight kg
PN bar
Lmm
DN mm
AVK ref. nos.Type
Series 712/4910
FFDouble flange pipeaccording to DIN545Standard flangedrilling to ISO7005-2,EN1092-2: 1997Epoxy coatedaccording to DIN30677-2 and GSKguide linesDN 50-600
1
122,001110/1660050712-0050-49101125,001410/1660065712-0065-49101149,001610/1660080712-0080-49101164,001810/16600100712-0100-49101222,002510/16600125712-0125-49101230,002910/16600150712-0150-49101311,004110600200712-0200-49100311,004116600200712-0200-49101438,005510600250712-0250-49100438,005516600250712-0250-49101503,007210600300712-0300-49100503,007216600300712-0300-49101727,0010010600350712-0350-49100836,0010016600350712-0350-49101921,0012410600400712-0400-49100
1.059,0012416600400712-0400-491011.031,0016010600450712-0450-491001.186,0016016600450712-0450-491011.181,0018810600500712-0500-491001.358,0018816600500712-0500-491011.584,0026510600600712-0600-491001.822,0026516600600712-0600-49101
Gross priceEUR
Theoreticalweight kg
PN bar
Lmm
DN mm
AVK ref. nos.Type
Series 712/5010
FFDouble flange pipeaccording to DIN545Standard flangedrilling to ISO7005-2,EN1092-2: 1997Epoxy coatedaccording to DIN30677-2 and GSKguide linesDN 80-600
1
149,001710/1670080712-0080-50101164,002010/16700100712-0100-50101222,002710/16700125712-0125-50101230,003110/16700150712-0150-50101311,004510700200712-0200-50100311,004516700200712-0200-50101438,006310700250712-0250-50100438,006316700250712-0250-50101503,007910700300712-0300-50100503,007916700300712-0300-50101876,0010910700350712-0350-50100
1.007,0010916700350712-0350-50101921,0013610700400712-0400-50100
1.059,0013616700400712-0400-501011.190,0017410700450712-0450-501001.368,0017416700450712-0450-501011.378,0020410700500712-0500-501001.585,0020416700500712-0500-501011.848,0028710700600712-0600-501002.125,0028716700600712-0600-50101
Fittings
Products for water according to EN545
EN 545
28 2007-07-10 11:28 CET
Gross priceEUR
Theoreticalweight kg
PN bar
Lmm
DN mm
AVK ref. nos.Type
Series 712/5110
FFDouble flange pipeaccording to DIN545Standard flangedrilling to ISO7005-2,EN1092-2: 1997Epoxy coatedaccording to DIN30677-2 and GSKguide linesDN 80-600
1
149,001910/1680080712-0080-51101164,002410/16800100712-0100-51101222,003010/16800125712-0125-51101230,003710/16800150712-0150-51101311,005110800200712-0200-51100311,005116800200712-0200-51101438,006910800250712-0250-51100438,006916800250712-0250-51101503,009010800300712-0300-51100503,009016800300712-0300-51101946,0011910800350712-0350-51100
1.088,0011916800350712-0350-511011.114,0014810800400712-0400-511001.281,0014816800400712-0400-511011.391,0018810800450712-0450-511001.600,0018816800450712-0450-511011.574,0022110800500712-0500-511001.810,0022116800500712-0500-511012.112,0030810800600712-0600-511002.429,0030816800600712-0600-51101
Gross priceEUR
Theoreticalweight kg
PN bar
Lmm
DN mm
AVK ref. nos.Type
Series 712/5210
FFDouble flange pipeaccording to DIN545Standard flangedrilling to ISO7005-2,EN1092-2: 1997Epoxy coatedaccording to DIN30677-2 and GSKguide linesDN 80-600
1
163,002110/1690080712-0080-52101180,002610/16900100712-0100-52101245,003210/16900125712-0125-52101252,004010/16900150712-0150-52101342,005610900200712-0200-52100342,005616900200712-0200-52101480,007510900250712-0250-52100480,007516900250712-0250-52101554,009810900300712-0300-52100554,009816900300712-0300-52101731,0012910900350712-0350-52100840,0012916900350712-0350-52101926,0016010900400712-0400-52100
1.065,0016016900400712-0400-521011.188,0020210900450712-0450-521001.366,0020216900450712-0450-521011.380,0023710900500712-0500-521001.588,0023716900500712-0500-521011.974,0032910900600712-0600-521002.270,0032916900600712-0600-52101
Fittings
Products for water according to EN545
EN 545
29 2007-07-10 11:28 CET
Gross priceEUR
Theoreticalweight kg
PN bar
Lmm
DN mm
AVK ref. nos.Type
Series 712/5310
FFDouble flange pipeaccording to DIN545Standard flangedrilling to ISO7005-2,EN1092-2: 1997Epoxy coatedaccording to DIN30677-2 and GSKguide linesDN 80-600
1
163,002210/16100080712-0080-53101180,002710/161000100712-0100-53101245,003510/161000125712-0125-53101252,004210/161000150712-0150-53101342,0059101000200712-0200-53100342,0059161000200712-0200-53101480,0079101000250712-0250-53100480,0079161000250712-0250-53101554,00101101000300712-0300-53100554,00101161000300712-0300-53101961,00138101000350712-0350-53100
1.053,00138161000350712-0350-531011.033,00171101000400712-0400-531001.188,00171161000400712-0400-531011.410,00216101000450712-0450-531001.621,00216161000450712-0450-531011.533,00254101000500712-0500-531001.763,00254161000500712-0500-531012.142,00351101000600712-0600-531002.463,00351161000600712-0600-53101
Gross priceEUR
Theoreticalweight kg
PN bar
Lmm
DN mm
AVK ref. nos.Type
Series 712/6010
FF-WPFlanged pipe withwall sleeveStandard flangedrilling to ISO7005-2,EN1092-2: 1997Epoxy coatedaccording to DIN30677-2 and GSKguide linesDN 100-600
1
152,002110/16500100712-0100-60101208,003210/16500150712-0150-60101265,004110500200712-0200-60100265,004116500200712-0200-60101363,006310500250712-0250-60100363,006316500250712-0250-60101511,008010500300712-0300-60100511,008016500300712-0300-60101856,0014210500400712-0400-60100856,0014216500400712-0400-60101
1.356,0022110500500712-0500-601001.356,0022116500500712-0500-601011.888,0031910500600712-0600-601001.888,0031916500600712-0600-60101
Fittings
Products for water according to EN545
EN 545
30 2007-07-10 11:28 CET
Gross priceEUR
Theoreticalweight kg
PN bar
Lmm
DN mm
AVK ref. nos.Type
Series 712/6110
FF-WPFlanged pipe withwall sleeveStandard flangedrilling to ISO7005-2,EN1092-2: 1997Epoxy coatedaccording to DIN30677-2 and GSKguide linesDN 100-600
1
184,003110/161000100712-0100-61101287,004810/161000150712-0150-61101489,0067101000200712-0200-61100489,0067161000200712-0200-61101545,0091101000250712-0250-61100545,0091161000250712-0250-61101706,00117101000300712-0300-61100706,00117161000300712-0300-61101
1.230,00201101000400712-0400-611001.230,00201161000400712-0400-611011.798,00304101000500712-0500-611001.798,00304161000500712-0500-611012.521,00426101000600712-0600-611002.521,00426161000600712-0600-61101
Gross priceEUR
Theoreticalweight kg
PN bar
H2mm
Lmm
DN mm
AVK ref. nos.Type
Series 712/7010
NDuckfoot bend flangedaccording to DIN EN 545Standard flange drillingto ISO 7005-2,EN1092-2: 1997Epoxy coated accordingto DIN 30677-2 andGSK guide linesDN 80-150
1
99,001510/1611016580712-0080-70101107,001810/16125180100712-0100-70101193,003410/16160220150712-0150-70101
Fittings
Products for water according to EN545
EN 545
31 2007-07-10 11:28 CET
Gross priceEUR
Theoreticalweight kg
PN bar
Lmm
Dmm
DN mm
AVK ref. nos.Type
Series 712/7513
FFlanged spigotaccording to DIN545 series AStandard flangedrilling to ISO7005-2,EN1092-2: 1997Epoxy coatedaccording to DIN30677-2 andGSK guide linesDN 40-600
1
43,00510/163355640712-0040-7513154,00610/163406650712-0050-7513168,00910/163458265712-0065-7513152,001010/163509880712-0080-7513161,001210/16360118100712-0100-7513178,001710/16370144125712-0125-7513196,002110/16380170150712-0150-75131
140,002910400222200712-0200-75130140,002916400222200712-0200-75131219,004410420274250712-0250-75130219,004416420274250712-0250-75131295,005910440326300712-0300-75130295,005916440326300712-0300-75131473,008110460378350712-0350-75130544,008116460378350712-0350-75131651,0010110480429400712-0400-75130749,0010116480429400712-0400-75131
1.110,0015510520532500712-0500-751301.276,0015516520532500712-0500-751311.460,0022410560635600712-0600-751301.679,0022416560635600712-0600-75131
Gross priceEUR
Theoreticalweight kg
PN bar
Lmm
DN mm
AVK ref. nos.Type
Series 712/0120
FFKDouble flangedbend with mobileflanges11Standard flangedrilling to ISO7005-2,EN1092-2: 1997Epoxy coatedaccording to DIN30677-2 andGSK guide linesDN 40-300
1
39,00510/1612040712-0040-0120146,00610/1612050712-0050-0120156,00710/1612065712-0065-0120160,00810/1611580712-0080-0120195,001210/16118100712-0100-01201
119,001510/16112125712-0125-01201151,002010/16115150712-0150-01201222,002810131200712-0200-01200284,003810105250712-0250-01200443,005510115300712-0300-01200
Fittings
Products for water according to EN545
EN 545
32 2007-07-10 11:28 CET
Gross priceEUR
Theoreticalweight kg
PN bar
Lmm
DN mm
AVK ref. nos.Type
Series 712/0220
FFKDouble flangedbend 22 withmobile flangesStandard flangedrilling to ISO7005-2,EN1092-2: 1997Epoxy coatedaccording to DIN30677-2 andGSK guide linesDN 40-300
1
39,00510/169540712-0040-0220144,00610/169550712-0050-0220156,00810/1611565712-0065-0220171,00910/1610580712-0080-0220189,001110/16110100712-0100-02201
115,001510/16106125712-0125-02201150,001910/16110150712-0150-02201217,002710130200712-0200-02200328,004310140250712-0250-02200508,006410172300712-0300-02200
Gross priceEUR
Theoreticalweight kg
PN bar
Lmm
DN mm
AVK ref. nos.Type
Series 712/0420
FFKDouble flangedbend 45 withmobile flangesStandard flangedrilling to ISO7005-2,EN1092-2: 1997Epoxy coatedaccording to DIN30677-2 andGSK guide linesDN 40-300
1
39,00510/1614040712-0040-0420153,00710/1614050712-0050-0420162,00810/1616065712-0065-0420192,001210/1613080712-0080-0420198,001310/16141100712-0100-04201
124,001610/16150125712-0125-04201168,002210/16160150712-0150-04201246,003410180200712-0200-04200478,006010245250712-0250-04200623,007710275300712-0300-04200
Fittings
Products for water according to EN545
EN 545
33 2007-07-10 11:28 CET
Gross priceEUR
Theoreticalweight kg
PN bar
Lmm
DN mm
AVK ref. nos.Type
Series 712/0620
QDouble flangedbend 90with mobileflangesStandard flangedrilling to ISO7005-2,EN1092-2: 1997Epoxy coatedaccording to DIN30677-2 andGSK guide linesDN 40-300
1
41,00510/1614040712-0040-0620155,00710/1615150712-0050-0620160,00810/1616065712-0065-0620186,001110/1616580712-0080-06201
108,001410/16182100712-0100-06201152,001910/16202125712-0125-06201208,002610/16222150712-0150-06201280,003510260200712-0200-06200536,006710350250712-0250-06200713,008810400300712-0300-06200
Gross priceEUR
Theoreticalweight kg
PN bar
Hmm
Lmm
DN2mm
DN mm
AVK ref. nos.Type
Series 712/1020
TAll flanged Teewith mobile flangesStandard flangedrilling to ISO7005-2, EN1092-2:1997Epoxy coatedaccording to DIN30677-2 and GSKguide linesDN 40-300
1
86,00810/161402804040712-0040-10201103,001010/161503005050712-0050-10201
1310/1600060712-0061-102011210/1600060712-0062-10201
135,001310/161603206565712-0065-10201127,001310/161503205065712-0066-10201123,001210/161403204065712-0067-10201128,001610/161653308080712-0080-10201131,001510/161603306580712-0081-10201117,001410/161653305080712-0082-10201119,001410/161403304080712-0083-10201156,002010/16180360100100712-0100-10201151,001710/1617536080100712-0101-10201156,001910/1617036065100712-0102-10201140,001810/1616036050100712-0103-10201148,001710/1615036040100712-0104-10201207,002710/16200400125125712-0125-10201195,002610/16195400100125712-0126-10201187,002510/1619040080125712-0127-10201189,002410/1618540065125712-0128-10201189,002310/1617540050125712-0129-10201180,002310/1616540040125712-0130-10201265,003610/16220440150150712-0150-10201253,003510/16215440125150712-0151-10201241,003210/16210440100150712-0152-10201234,003210/1620544080150712-0153-10201238,003110/1619544065150712-0154-10201250,003110/1618544050150712-0155-10201312,002810/1619044040150712-0156-10201398,005310260520200200712-0200-10200373,004910250520150200712-0201-10200418,004710240520125200712-0202-10200349,004510240520100200712-0203-10200342,00421023552080200712-0204-10200488,00411022052065200712-0205-10200488,00411022052050200712-0206-10200476,00411021552040200712-0207-10200659,008410300600250250712-0250-10200609,007110290540200250712-0251-10200656,006310280460150250712-0252-10200546,006210275460125250712-0253-10200546,006010270460100250712-0254-10200582,00551026538080250712-0255-10200689,00491026038065250712-0256-10200927,0012110340660300300712-0300-10200926,0010510330660250300712-0301-10200832,009210320545200300712-0302-10200820,009210300545150300712-0303-10200
Fittings
Products for water according to EN545
EN 545
34 2007-07-10 11:28 CET
Gross priceEUR
Theoreticalweight kg
PN bar
Hmm
Lmm
DN2mm
DN mm
AVK ref. nos.Type
Series 712/1020
TAll flanged Teewith mobile flangesStandard flangedrilling to ISO7005-2, EN1092-2:1997Epoxy coatedaccording to DIN30677-2 and GSKguide linesDN 40-300
1
761,007510300450100300712-0305-10200
Gross priceEUR
Theoreticalweight kg
PN bar
Hmm
Lmm
Ddmm
DN mm
AVK ref. nos.Type
Series 712/1031
MMA-KSSocket Tee withmobile flangebranch forUPVC pipesaccording to ENStandard flangedrilling to ISO7005-2,EN1092-2: 1997Epoxy coatedaccording to DIN30677-2 andGSK guide linesDN 50-300
1
53,00710/161402556350712-0050-1031151,00610/161402516350712-0051-1031156,00710/161402516350712-0054-1031156,00710/161402516350712-0055-1031161,00710/161402817565712-0065-1031152,00610/161402637565712-0066-1031148,00610/161402537565712-0067-1031180,001010/161603179080712-0080-1031173,00910/161603019080712-0081-1031164,00810/161602899080712-0082-1031162,00710/161602769080712-0083-1031173,00910/161603019080712-0086-10311
110,001310/16170349110100712-0100-1031191,001110/16170328110100712-0101-1031185,001010/16170312110100712-0102-1031181,00910/16170301110100712-0103-1031177,00810/16170287110100712-0104-1031185,001010/16170312110100712-0107-10311
158,001810/16180388125125712-0125-10311146,001510/16180364125125712-0126-10311118,001210/16170343125125712-0127-10311111,001210/16170329125125712-0128-10311105,001110/16170317125125712-0129-10311100,001010/16170303125125712-0130-10311111,001210/16170329125125712-0133-10311156,001910/16200404140125712-0141-10311150,001810/16200380140125712-0142-10311119,001410/16185359140125712-0143-10311117,001310/16185344140125712-0144-10311111,001410/16170329140125712-0145-10311108,001110/16171321140125712-0146-10311117,001310/16185344140125712-0149-10311208,002510/16220451160150712-0150-10311199,002410/16220426160150712-0151-10311170,002110/16210403160150712-0152-10311146,001710/16200380160150712-0153-10311143,001710/16190366160150712-0154-10311142,001710/16170351160150712-0155-10311140,001510/16170343160150712-0156-10311143,001710/16190366160150712-0157-10311327,004010250568200200712-0200-103-10251,003110/16250520200200712-0201-10311
Fittings
Products for water according to EN545
EN 545
35 2007-07-10 11:28 CET
Gross priceEUR
Theoreticalweight kg
PN bar
Hmm
Lmm
Ddmm
DN mm
AVK ref. nos.Type
Series 712/1031
MMA-KSSocket Tee withmobile flangebranch forUPVC pipesaccording to ENStandard flangedrilling to ISO7005-2,EN1092-2: 1997Epoxy coatedaccording to DIN30677-2 andGSK guide linesDN 50-300
1
234,002910/16250495200200712-0202-10311219,002610/16230468200200712-0203-10311205,002410/16230449200200712-0204-10311192,002310/16230435200200712-0205-10311178,002210/16200420200200712-0206-10311171,002210/16200410200200712-0207-10311244,004210260586225200712-0226-10310289,003510/16260536225200712-0228-10311235,002810/16260511225200712-0230-10311231,002610/16230486225200712-0231-10311211,002810/16230466225200712-0232-10311202,002510/16230451225200712-0233-10311202,002510/16230451225200712-0238-10311513,006310319673280250712-0281-10310464,005410290622280250712-0283-10310364,004410/16230575280250712-0285-10311330,004010/16260547280250712-0287-10311294,003710/16258522280250712-0288-10311286,003410/16260502280250712-0289-10311272,003310/16260487280250712-0290-10311272,003310/16260487280250712-0295-10311683,008310310770315300712-0300-10310599,007310310720315300712-0301-10310650,007910310670315300712-0302-10310521,006410/16310620315300712-0303-10311500,006310/16300570315300712-0305-10311488,005710/16300550315300712-0306-10311
Gross priceEUR
Theoreticalweight kg
PN bar
Lmm
Dd1mm
DN mm
AVK ref. nos.Type
Series 712/2220
FFRDouble flange reducerwith mobile flangesStandard flange drilling toISO 7005-2, EN1092-2:1997Epoxy coated according toDIN 30677-2 and GSKguide linesDN 65-300
1
54,00710/161605065712-0066-2220146,00610/161604065712-0067-2220163,00810/162006580712-0081-2220162,00710/162005080712-0082-2220158,00710/162004080712-0083-2220179,001010/1620080100712-0101-2020169,00910/1620065100712-0102-2220167,00810/1620050100712-0103-2220164,00810/1620040100712-0104-22201
102,001310/16200100125712-0126-2220196,001210/1620080125712-0127-2220185,001110/1620065125712-0128-2220185,001110/1620050125712-0129-2220178,001010/1620040125712-0130-22201
135,001610/16200125150712-0151-22201121,001410/16200100150712-0152-22201119,001310/1620080150712-0153-22201103,001310/1620065150712-0154-22201103,001210/1620050150712-0155-22201103,001110/1620040150712-0156-22201201,002310235150200712-0201-22200183,002010235125200712-0202-22200166,002010235100200712-0203-22200162,00201023580200712-0204-22200152,00201023565200712-0205-22200282,003310250200250712-0251-22200249,003110250150250712-0252-22200246,003310250125250712-0253-22200231,002810250100250712-0254-22200217,00271025080250712-0255-22200214,00271025065250712-0256-22200402,004910265250300712-0301-22200338,004310265250300712-0302-22200313,003810265200300712-0303-22200285,003410265150300712-0305-22200
Fittings
Products for water according to EN545
EN 545
36 2007-07-10 11:28 CET
Gross priceEUR
Theoreticalweight kg
PN bar
Lmm
DN mm
AVK ref. nos.Type
Series 712/4320
FFDouble flangepipe with mobileflangesStandard flangedrilling to ISO7005-2,EN1092-2: 1997Epoxy coatedaccording to DIN30677-2 andGSK guide linesDN 40-300
1
41,00510/1625040712-0040-4320157,0081050040712-0040-4820148,00710/1625050712-0050-4320176,0091050050712-0050-4820162,00810/1625065712-0065-4320186,00111050065712-0065-4820182,001010/1625080712-0080-43201
115,00151050080712-0080-48201104,001310/16250100712-0100-43201148,001810500100712-0100-48201131,001710/16250125712-0125-43201185,002110500125712-0125-48201164,002010/16250150712-0150-43201234,002910500150712-0150-48201221,002810250200712-0200-43200320,003910500200712-0200-48200287,003810250250712-0250-43200456,005710500250712-0250-48200418,005410250300712-0300-43200582,007510500300712-0300-48200
Gross priceEUR
Theoreticalweight kg
H2mm
Lmm
DN mm
AVK ref. nos.Type
Series 712/7020
NDuckfoot bend withmobile flangesStandard flange drillingto ISO 7005-2,EN1092-2: 1997Epoxy coated accordingto DIN 30677-2 and GSKguide linesDN 65-150
1
144,001810016565712-0065-70201114,001311016780712-0080-70201139,0020125180100712-0100-70201236,0029160220150712-0150-70201
Fittings
Products for water according to EN545
EN 545
37 2007-07-10 11:28 CET
Gross priceEUR
Theoreticalweight kg
PN bar
Lmm
DN mm
AVK ref. nos.Type
Series 712/7520
SS-piece withmobile flangesStandard flangedrilling to ISO7005-2,EN1092-2: 1997Epoxy coated according to DIN 30677-2 andGSK guide linesDN 80-150
1
205,001810/1650080712-0080-75201246,002210/16500100712-0100-75201320,003910/16500150712-0150-75201
Gross priceEUR
Theoreticalweight kg
PN bar
Lmm
DN mm
AVK ref. nos.Type
Series 712/0140
MMKDouble socketbend 11.25 withTyton socketsaccording to EN545 series AStandard flangedrilling to ISO7005-2, EN1092-2: 1997Epoxy coatedaccording to DIN30677-2 andGSK guide linesDN 80-600
1
59,007163080712-0080-0140168,0091630100712-0100-0140184,00111635125712-0125-01401
104,00141635150712-0150-01401158,00201640200712-0200-01401209,00281650250712-0250-01401301,00371655300712-0300-01401411,00481660350712-0350-01401521,00561665400712-0400-01401
1.173,00871675500712-0500-014011.834,001201685600712-0600-01401
Fittings
Products for water according to EN545
EN 545
38 2007-07-10 11:28 CET
Gross priceEUR
Theoreticalweight kg
PN bar
Lmm
DN mm
AVK ref. nos.Type
Series 712/0240
MMKDouble socketbend 22.5 withTyton socketsaccording to EN545 series AStandard flangedrilling to ISO7005-2, EN1092-2: 1997Epoxy coatedaccording to DIN30677-2 andGSK guide linesDN 80-600
1
66,007164080712-0080-0240173,0091640100712-0100-0240190,00111650125712-0125-02401
111,00141655150712-0150-02401169,00211665200712-0200-02401227,00311675250712-0250-02401331,00401685300712-0300-02401563,00511695350712-0350-02401576,006416110400712-0400-02401
1.290,0010016130500712-0500-024012.021,0014116150600712-0600-02401
Gross priceEUR
Theoreticalweight kg
PN bar
Lmm
DN mm
AVK ref. nos.Type
Series 712/0340
MMKDouble socketbend 30 withTyton socketsaccording to DIN545 series AStandard flangedrilling to ISO7005-2, EN1092-2: 1997Epoxy coatedaccording to DIN30677-2 andGSK guide linesDN 80-600
1
66,007164580712-0080-0340174,0091650100712-0100-0340192,00121655125712-0125-03401
114,00151665150712-0150-03401174,00221680200712-0200-03401233,00321695250712-0250-03401342,004316110300712-0300-03401584,005516125350712-0350-03401600,006916140400712-0400-03401
1.245,0010916170500712-0500-034012.077,0015616200600712-0600-03401
Fittings
Products for water according to EN545
EN 545
39 2007-07-10 11:28 CET
Gross priceEUR
Theoreticalweight kg
PN bar
Lmm
DN mm
AVK ref. nos.Type
Series 712/0440
MMKDouble socketbend 45 withTyton socketsaccording to EN545 series AStandard flangedrilling to ISO7005-2, EN1092-2: 1997Epoxy coatedaccording to DIN30677-2 andGSK guide linesDN 80-600
1
68,007165580712-0080-0440177,0091665100712-0100-0440197,00121675125712-0125-04401
120,00161685150712-0150-04401184,002516110200712-0200-04401272,003616130250712-0250-04401367,004916150300712-0300-04401584,006516175350712-0350-04401647,008216195400712-0400-04401
1.366,0012716240500712-0500-044012.209,0018416285600712-0600-04401
Gross priceEUR
Theoreticalweight kg
PN bar
Lmm
DN mm
AVK ref. nos.Type
Series 712/0640
MMQDouble socketbend 90 withTyton socketsaccording to EN545 series AStandard flangedrilling to ISO7005-2, EN1092-2: 1997Epoxy coatedaccording to DIN30677-2 andGSK guide linesDN 80-600
1
73,0081610080712-0080-0640187,001016120100712-0100-06401
119,001516145125712-0125-06401141,001916170150712-0150-06401224,003116220200712-0200-06401323,004616270250712-0250-06401512,006416320300712-0300-06401
1.251,0014016380350712-0350-064011.248,0012616430400712-0400-064011.897,0027016600500712-0500-064012.833,0036516640600712-0600-06401
Fittings
Products for water according to EN545
EN 545
40 2007-07-10 11:28 CET
Gross priceEUR
Theoreticalweight kg
PN bar
Hmm
Lmm
DN2mm
DN mm
AVK ref. nos.Type
Series 712/1040
MMBTyton socketTee with socketbranchaccording to EN545 series AStandard flangedrilling to ISO7005-2, EN1092-2: 1997Epoxy coatedaccording to DIN30677-2 andGSK guide linesDN 80-300
1
103,001316851708080712-0080-1040190,001116801705080712-0082-1040186,001116801204080712-0083-10401
115,00141695190100100712-0100-10401115,0013169517080100712-0101-10401115,0015169014550100712-0103-10401115,0014169014540100712-0104-10401163,002016110225125125712-0125-10401150,001816110195100125712-0126-10401150,00171610517080125712-0127-10401150,00191610517050125712-0129-10401150,00181610012540125712-0130-10401197,002516125255150150712-0150-10401238,002916125255125150712-0151-10401177,002116120195100150712-0152-10401177,00201612017080150712-0153-10401177,00231612017050150712-0155-10401177,00211611512540150712-0156-10401303,003816155315200200712-0200-10401274,003316150255150200712-0201-10401320,003916145255125200712-0202-10401248,002916145200100200712-0203-10401248,00271614517580200712-0204-10401248,00311614517550200712-0206-10401248,00271614013040200712-0207-10401518,005616190375250250712-0250-10401438,004316180315200250712-0251-10401400,004616175260150250712-0252-10401364,004016170200100250712-0254-10401364,00361617018080250712-0255-10401816,007616220435300300712-0300-10401816,008016210375250300712-0301-10401622,006116205320200300712-0302-10401554,005416200260150300712-0303-10401487,004816195205100300712-0305-10401462,00451619520580300712-0306-10401
Gross priceEUR
Theoreticalweight kg
PN bar
Hmm
Lmm
DN2mm
DN mm
AVK ref. nos.Type
Series 712/1042
MMATyton Socket Teewith flangedbranch accordingto EN 545 seriesAStandard flangedrilling to ISO7005-2,EN1092-2: 1997Epoxy coatedaccording to DIN30677-2 and GSKguide linesDN 80-600
1
102,001310/161651708080712-0080-10421110,001310/161601706580712-0081-10421115,001110/161601705080712-0082-10421115,001110/161551704080712-0083-10421113,001610/16180190100100712-0100-10421107,001510/1617517080100712-0101-10421115,001410/1617517065100712-0102-10421106,001310/1617017050100712-0103-10421106,001310/1617017040100712-0104-10421177,002210/16200225125125712-0125-10421146,001910/16195195100125712-0126-10421139,001810/1619017080125712-0127-10421145,001810/1617017050125712-0129-10421139,001610/1617017040125712-0130-10421185,003210/16220255150150712-0150-10421182,002910/16210195100150712-0152-10421180,002910/1620517080150712-0153-10421206,003110/1620017050150712-0155-10421180,003810/1619517040150712-0156-10421306,004210260315200200712-0200-10420306,004216260315200200712-0200-10421277,003610250255150200712-0201-10420277,003616250255150200712-0201-10421259,003010240200100200712-0203-10420259,003016240200100200712-0203-10421259,00291023517580200712-0204-10420259,00291623517580200712-0204-10421259,00271026520050200712-0206-10420259,00271626520050200712-0206-10421259,00271023017540200712-0207-10420259,00271623017540200712-0207-10421468,006110300375250250712-0250-10420468,006116300375250250712-0250-10421401,004310290315200250712-0251-10420401,004316290315200250712-0251-10421364,004610280260150250712-0252-10420364,004616280260150250712-0252-10421
Fittings
Products for water according to EN545
EN 545
41 2007-07-10 11:28 CET
Gross priceEUR
Theoreticalweight kg
PN bar
Hmm
Lmm
DN2mm
DN mm
AVK ref. nos.Type
Series 712/1042
MMATyton Socket Teewith flangedbranch accordingto EN 545 seriesAStandard flangedrilling to ISO7005-2,EN1092-2: 1997Epoxy coatedaccording to DIN30677-2 and GSKguide linesDN 80-600
1
330,004010270200100250712-0254-10420330,004016270200100250712-0254-10421329,00381026518080250712-0255-10420329,00381626518080250712-0255-10421614,008310340435300300712-0300-10420614,008316340435300300712-0300-10421596,007510330430250300712-0301-10420596,007516330430250300712-0301-10421439,006510320320200300712-0302-10420439,006516320320200300712-0302-10421440,005710310260150300712-0303-10420440,005716310260150300712-0303-10421435,005010300205100300712-0305-10420435,005016300205100300712-0305-10421435,00471029518080300712-0306-10420435,00471629518080300712-0306-10421899,0011010380495350350712-0350-10420899,0011016380495350350712-0350-10421629,007710350325200350712-0353-10420629,007716350325200350712-0353-10421895,005910330205100350712-0356-10420895,005916330205100350712-0356-10421
1.089,0014110420560400400712-0400-104201.089,0014116420560400400712-0400-104211.009,0011410400440300400712-0402-104201.009,0011416400440300400712-0402-10421
861,0010510390440250400712-0403-10420861,0010516390440250400712-0403-10421927,009110380325200400712-0404-10420927,009116380325200400712-0404-10421793,007010370270150400712-0405-10420793,007016370270150400712-0405-10421783,007610360210100400712-0407-10420783,007616360210100400712-0407-10421781,00611035518580400712-0408-10420781,00611635518580400712-0408-10421
3.225,0022710500680500500712-0500-104203.225,0022716500680500500712-0500-104212.277,0018910480565400500712-0502-104202.277,0018916480565400500712-0502-104212.211,0015610460450300500712-0504-104202.211,0015616460450300500712-0504-104211.816,0012810440330200500712-0506-104201.816,0012816440330200500712-0506-104211.794,0012610430330150500712-0507-104201.794,0012616430330150500712-0507-104211.708,0010410420215100500712-0509-104201.708,0010416420215100500712-0509-10421
853,001041042021580500712-0510-10420853,001041642021580500712-0510-10421
4.770,0033616580800600600712-0600-104204.770,0033610580800600600712-0600-104214.510,0031716560800500600712-0601-104204.510,0031710560800500600712-0601-104213.398,0023916540570400600712-0603-104203.398,0023910540570400600712-0603-104213.266,0023016520570300600712-0605-104203.266,0023010520570300600712-0605-104213.185,0022410510570250600712-0606-104203.185,0022410510570250600712-0606-104212.395,0016910500340200600712-0607-104202.395,0016916500340200600712-0607-104212.357,0016610490340150600712-0608-104202.357,0016616490340150600712-0608-104212.230,0016410480340100600712-0610-104202.230,0016416480340100600712-0610-104212.315,001631047534080600712-0611-104202.315,001631647534080600712-0611-10421
Fittings
Products for water according to EN545
EN 545
42 2007-07-10 11:28 CET
Gross priceEUR
Theoreticalweight kg
PN bar
Lmm
DN2mm
DN mm
AVK ref. nos.Type
Series 712/2040
MMRDouble socketreducer withTyton socketaccording to EN545 series AStandard flangedrilling to ISO7005-2, EN1092-2: 1997Epoxy coatedaccording to DIN30677-2 andGSK guide linesDN 100-600
1
71,008169080100712-0101-2040181,001016100100125712-0126-2040181,00101614080125712-0127-20401
130,001316100125150712-0151-20401126,001216150100150712-0152-20401175,00121619080150712-0153-20401182,001916150150200712-0201-20401175,001916200125200712-0202-20401175,001816250100200712-0203-20401242,002616150200250712-0251-20401233,002716250150250712-0252-20401298,003616300125250712-0253-20401284,003516150250300712-0301-20401293,003616250200300712-0302-20401294,003616350150300712-0303-20401370,004516160300350712-0351-20401384,004716260250350712-0352-20401392,004816360200350712-0353-20401455,005616160350400712-0401-20401476,005816260300400712-0402-20401498,006116360250400712-0403-20401984,0012016260400500712-0502-20401723,008816360350500712-0503-20401
1.230,0011516260500600712-0601-204011.050,0012816460400600712-0603-20401
Gross priceEUR
Theoreticalweight kg
PN bar
Lmm
DN mm
AVK ref. nos.Type
Series 712/3240
TY-CFemale end cap withTyton socketStandard flangedrilling to ISO7005-2, EN 1092-2:1997Epoxy coatedaccording to DIN30677-2 and GSKguide linesDN 80-300
1
28,003164080712-0080-3240141,0051640100712-0100-3240149,0061645125712-0125-3240166,0081645150712-0150-32401
115,00141650200712-0200-32401183,00211655250712-0250-32401246,00301660300712-0300-32401
Fittings
Products for water according to EN545
EN 545
43 2007-07-10 11:28 CET
Gross priceEUR
Theoreticalweight kg
PN bar
W1mm
H3mm
H2mm
DN mm
AVK ref. nos.Type
Series 712/7014
ENDuckfoot bendflanged with TytonsocketStandard flangedrilling to ISO7005-2, EN1092-2:1997Epoxy coatedaccording to DIN30677-2 and GSKguide linesDN 80-100
1
93,001510/1616525511080712-0080-70141108,001710/16180283125100712-0100-70141
Gross priceEUR
Theoreticalweight kg
PN bar
Lmm
DN mm
AVK ref. nos.Type
Series 712/7514
EUFlanged socket with Tyton socket accordingto EN 545 series AStandard flange drilling to ISO 7005-2,EN1092-2: 1997Epoxy coated according to DIN 30677-2 andGSK guide linesDN 80-600
1
54,00810/1613080712-0080-7514163,001010/16130100712-0100-7514183,001410/16135125712-0125-7514198,001610/16135150712-0150-75141
138,002510140200712-0200-75140138,002516140200712-0200-75141195,003210145250712-0250-75140195,003216145250712-0250-75141276,003910150300712-0300-75140276,003916150300712-0300-75141439,004710155350712-0350-75140439,004716155350712-0350-75141551,006010160400712-0400-75140551,006016160400712-0400-75141826,008410170500712-0500-75140826,008416170500712-0500-75141
1.201,0011210180600712-0600-751401.201,0011216180600712-0600-75141
Fittings
Products for water according to EN545
EN 545
44 2007-07-10 11:28 CET
Gross priceEUR
Theoreticalweight kg
PN bar
Lmm
DN mm
AVK ref. nos.Type
Series 712/7540
UDouble sockedcollar with TytonsocketsStandard flangedrilling to ISO7005-2, EN1092-2: 1997Epoxy coatedaccording to DIN30677-2 andGSK guide linesDN 80-600
1
98,0091616080712-0080-75401119,001116160100712-0100-75401149,001416165125712-0125-75401173,001816165150712-0150-75401245,002616170200712-0200-75401341,003516175250712-0250-75401465,004816180300712-0300-75401651,005516185350712-0350-75401782,006216190400712-0400-75401
1.175,00016200500712-0500-754011.806,00016210600712-0600-75401
Gross priceEUR
Theoreticalweight kg
PN bar
Lmm
DN mm
AVK ref. nos.Type
Series 712/7519
EUFlangedMecanical JointSocket for DIpipesStandard flangedrilling to ISO7005-2,EN1092-2: 1997Epoxy coatedaccording to DIN30677-2 andGSK guide linesDN 60-600
1
86,001010/1612560712-0060-75191107,001310/1613080712-0080-75191131,001510/16130100712-0100-75191156,001910/16135125712-0125-75191189,002410/16135150712-0150-75191246,003416140200712-0200-75191336,004416145250712-0250-75191443,005416150300712-0300-75191637,007416155350712-0350-75191732,007416160400712-0400-75191
1.179,0013716170500712-0500-751911.636,0019016180600712-0600-75191
Fittings
Products for water according to EN545
EN 545
45 2007-07-10 11:28 CET
Gross priceEUR
Theoreticalweight kg
PN bar
Lmm
DN1 L1mm
DN mm
AVK ref. nos.Type
Series 712/7563
EUFlanged couplingnon tensileMecanical Jointfor DI pipesStandard flangedrilling to ISO7005-2,EN1092-2: 1997Epoxy coatedaccording to DIN30677-2 andGSK guide linesDN 80-600
1
115,001410/162858580712-0080-75631135,001710/1629590100712-0100-75631168,002110/1631090125712-0125-75631217,002710/1632595150712-0150-75631312,003816370100200712-0200-75631435,005316395105250712-0250-75631549,006716425110300712-0300-75631763,009316445110350712-0350-75631943,0011516450110400712-0400-75631
1.410,0017216490120500712-0500-756311.935,0023616500120600712-0600-75631
Gross priceEUR
Theoreticalweight kg
PN bar
Lmm
DN mm
AVK ref. nos.Type
Series 712/0160
MMKDouble socketbend 11.25Mecanical Jointfor DI pipesStandard flangedrilling to ISO7005-2, EN1092-2: 1997Epoxy coatedaccording to DIN30677-2 andGSK guide linesDN 60-600
1
103,0012162560712-00600-1601139,0017163080712-00800-1601164,00201630100712-01000-1601197,00241635125712-01250-1601246,00301635150712-01500-1601312,00381640200712-02000-1601418,00511650250712-02500-1601566,00691655300712-03000-1601771,00941660350712-03500-1601935,001141665400712-04000-1601
1.353,001651675500712-05000-16011.837,002241685600712-06000-1601
Fittings
Products for water according to EN545
EN 545
46 2007-07-10 11:28 CET
Gross priceEUR
Theoreticalweight kg
PN bar
Lmm
DN mm
AVK ref. nos.Type
Series 712/0260
MMKDouble socketbend 22½Mecanical Jointfor DI pipesStandard flangedrilling to ISO7005-2, EN1092-2: 1997Epoxy coatedaccording to DIN30677-2 andGSK guide linesDN 60-600
1
103,0013163560712-00600-2601139,0017164580712-00800-2601164,00201650100712-01000-2601205,00251650125712-01250-2601254,00341655150712-01500-2601328,00431665200712-02000-2601443,00581675250712-02500-2601590,00731685300712-03000-2601812,00991695350712-03500-2601
1.000,0012216110400712-04000-26011.460,0017816130500712-05000-26012.001,0024416150600712-06000-2601
Gross priceEUR
Theoreticalweight kg
PN bar
Lmm
DN mm
AVK ref. nos.Type
Series 712/0460
MMKDouble socketbend 45Mecanical Jointfor DI pipesStandard flangedrilling to ISO7005-2, EN1092-2: 1997Epoxy coatedaccording to DIN30677-2 andGSK guide linesDN 60-600
1
107,0013164560712-00600-4601148,0017165580712-00800-4601172,00201665100712-01000-4601213,00261675125712-01250-4601271,00341685150712-01500-4601361,004816110200712-02000-4601484,006616130250712-02500-4601664,008116150300712-03000-4601918,0011216175350712-03500-4601
1.132,0013816195400712-04000-46011.697,0020716240500712-05000-46012.378,0029016285600712-06000-4601
Fittings
Products for water according to EN545
EN 545
47 2007-07-10 11:28 CET
Gross priceEUR
Theoreticalweight kg
PN bar
Lmm
DN mm
AVK ref. nos.Type
Series 712/0660
MMQDouble socketbend 90Mecanical Jointfor DI pipesStandard flangedrilling to ISO7005-2, EN1092-2: 1997Epoxy coatedaccording to DIN30677-2 andGSK guide linesDN 60-600
1
116,0014168060712-00600-6601156,00181610080712-00800-6601180,002216120100712-01000-6601230,002816145125712-01250-6601295,003816170150712-01500-6601402,005616220200712-02000-6601566,007516270250712-02500-6601787,009616320300712-03000-6601
1.017,0012416370350712-03500-66011.378,0016816420400712-04000-66012.107,0025716520500712-05000-66013.034,0037016620600712-06000-6601
Gross priceEUR
Theoreticalweight kg
PN bar
Hmm
Lmm
DN2mm
DN mm
AVK ref. nos.Type
Series 712/1060
MMBSocket TeeMecanical Jointfor DI pipesStandard flangedrilling to ISO7005-2, EN1092-2: 1997Epoxy coatedaccording to DIN30677-2 andGSK guide linesDN 60-250
1
164,0020161451566060712-0060-10601238,0026161701708080712-0080-10601279,003116190185100100712-0100-10601262,00281617018080100712-0101-10601336,004116225202125125712-0125-10601320,003916195200100125712-0126-10601303,00371617019080125712-0127-10601435,005016255220150150712-0150-10601377,004416195210100150712-0152-10601353,00431617020580150712-0153-10601574,007316315257200200712-0200-10601517,006616255245150200712-0201-10601451,005516200235100200712-0203-10601435,00531617523080200712-0204-10601822,0010016375297250250712-0250-10601786,009616315210200250712-0251-10601744,007616260270150250712-0252-10601723,006816200260100250712-0254-10601
Fittings
Products for water according to EN545
EN 545
48 2007-07-10 11:28 CET
Gross priceEUR
Theoreticalweight kg
PN bar
Lmm
Hmm
DN2mm
DN mm
AVK ref. nos.Type
Series 712/1061
MMASocket Tee withflanged branchMecanical Jointfor DI pipesStandard flangedrilling to ISO7005-2,EN1092-2: 1997Epoxy coatedaccording to DIN30677-2 andGSK guide linesDN 80-600
1
197,002210/161701658080712-0080-10611185,002110/161451606080712-0081-10611172,002110/161201554080712-0083-10611238,002710/16190180100100712-0100-10611230,002610/1617017580100712-0101-10611217,002310/1614517060100712-0102-10611197,002410/1612017040100712-0104-10611295,003710/16225200125125712-0125-10611279,003410/16195195100125712-0126-10611271,003210/1617019080125712-0127-10611377,004710/16255220150150712-0150-10611361,004410/16225215125150712-0151-10611344,004010/16195210100150712-0152-10611328,003910/1617020580150712-0153-10611303,003610/1615520060150712-0154-10611517,006916315260200200712-0200-10611467,005916255250150200712-0201-10611426,005316200240100200712-0203-10611402,00491617523580200712-0204-10611377,00481615023060200712-0205-10611722,008816375300250250712-0250-10611648,007916315290200250712-0251-10611590,007416275280150250712-0252-10611541,006516200270100250712-0254-10611517,00631618026580250712-0255-10611984,0012016435340300300712-0300-10611910,0011116380330250300712-0301-10611828,009716320320200300712-0302-10611763,008716260310150300712-0303-10611705,007916205300100300712-0305-10611681,00751618029580300712-0306-10611
1.402,0017116495380350350712-0350-106111.066,0013016325350200350712-0353-10611
894,0010916205330100350712-0356-106111.771,0021616560420400400712-0400-106111.656,0020216560400300400712-0402-106111.254,0015316325380200400712-0404-106111.230,0015016270370150400712-0405-106111.066,0013016210360100400712-0407-106112.796,0034116680500500500712-0500-106112.378,0029016565480400500712-0502-106112.255,0027516565480300500712-0504-106111.763,0021516330440200500712-0506-106111.730,0021116330440150500712-0507-106111.533,0018716215420100500712-0509-106114.034,0049216800580600600712-0600-106113.854,0047016800580500600712-0601-106113.034,0037016570540400600712-0603-106112.919,0035616570540300600712-0605-106112.320,0028316340500200600712-0607-106112.279,0027816340500150600712-0608-10611
Fittings
Products for water according to EN545
EN 545
49 2007-07-10 11:28 CET
Gross priceEUR
Theoreticalweight kg
PN bar
Lmm
DN2mm
DN mm
AVK ref. nos.Type
Series 712/2960
MMRDouble socketreducerMecanical Jointfor DI pipesStandard flangedrilling to ISO7005-2, EN1092-2: 1997Epoxy coatedaccording to DIN30677-2 andGSK guide linesDN 80-600
1
123,001516906080712-0086-29601156,0018169080100712-0101-29601189,002316100100125712-0126-29601180,00221614080125712-0127-29601230,002816100125150712-0151-29601221,002716150100150712-0152-29601213,00261619080150712-0153-29601303,003716150150200712-0201-29601287,003516200125200712-0202-29601279,003616250100200712-0203-29601348,003716150200250712-0251-29601385,004716250150250712-0252-29601369,004516300125250712-0253-29601517,006416150250300712-0301-29601508,006216250200300712-0302-29601500,006116350150300712-0303-29601689,008416160300350712-0349-29601672,008216260250350712-0352-29601664,008116360200350712-0353-29601869,0010616160350400712-0401-29601836,0010216260300400712-0402-29601820,0010016360250400712-0403-29601
1.238,0015116260400500712-0502-296011.246,0015216360350500712-0503-29601
894,0010916260500600712-0601-296011.706,0020816460400600712-0603-29601
Gross priceEUR
Theoreticalweight kg
PN bar
Lmm
DN mm
AVK ref. nos.Type
Series 712/3060
EXFemale End CapMecanical Joint forDI pipesStandard flangedrilling to ISO7005-2, EN 1092-2:1997Epoxy coatedaccording to DIN30677-2 and GSKguide linesDN 60-600
1
53,007164060712-0060-3060174,009164080712-0080-3060190,00111640100712-0100-30601
107,00131645125712-0125-30601148,00181645150712-0150-30601197,00241650200712-0200-30601287,00351655250712-0250-30601394,00481660300712-0-300-30601533,00651670350712-0350-30601681,00831670400712-0400-30601
1.041,0012716100500712-0500-306011.517,0018516110600712-0600-30601
Fittings
Products for water according to EN545
EN 545
50 2007-07-10 11:28 CET
Gross priceEUR
Theoreticalweight kg
PN bar
Lmm
Dmm
DN mm
AVK ref. nos.Type
Series 712/3141
EXEnd CapMecanical Jointfor DI pipesStandard flangedrilling to ISO7005-2, EN1092-2: 1997Epoxy coatedaccording to DIN30677-2 andGSK guide linesDN 60-600
1
25,003161807760712-0060-3141133,004162009880712-0080-3141141,00516200118100712-0100-3141157,00716225144125712-0125-3141174,00916225170150712-0150-31411
131,001616250222200712-0200-31411189,002316250274250712-0250-31411271,003316275326300712-0300-31411394,004816275378350712-0350-31411492,006016275429400712-0400-31411754,009216275532500712-0500-31411
1.164,0014216300635600712-0600-31411
Gross priceEUR
Theoreticalweight kg
PN bar
H2mm
Lmm
DN mm
AVK ref. nos.Type
Series 712/7060
ENDuckfoot SocketBendMecanical Jointfor DI pipesStandard flangedrilling to ISO7005-2, EN1092-2: 1997Epoxy coatedaccording to DIN30677-2 andGSK guide linesDN 60-600
1
135,0017168010060712-0060-70601189,00231610011080712-0080-70601230,002816120125100712-0100-70601295,003616145140125712-0125-70601385,004716170160150712-0150-70601541,006616220190200712-0200-70601771,009416270225250712-0250-70601
1.082,0013216320255300712-0300-706011.419,0017316370290350712-0350-706011.911,0023316420320400712-0400-706012.968,0036216520385500712-0500-706014.362,0053216620450600712-0600-70601
Fittings
Products for water according to EN545
EN 545
51 2007-07-10 11:28 CET
Gross priceEUR
Theoreticalweight kg
PN bar
Lmm
DN mm
AVK ref. nos.Type
Series 712/7560
UDouble socketMecanical Joint forDI pipesStandard flangedrilling to ISO7005-2, EN 1092-2:1997Epoxy coatedaccording to DIN30677-2 and GSKguide linesDN 60-600
1
123,00151615560712-0060-75601164,00201616080712-0080-75601180,002216160100712-0100-75601213,002616165125712-0125-75601271,003316165150712-0150-75601344,004216170200712-0200-75601451,005516175250712-0250-75601590,007216185300712-0300-75601779,009516185350712-0350-75601968,0011816190400712-0400-75601
1.320,0016116200500712-0500-756011.804,0022016210600712-0600-75601
Gross priceEUR
Theoreticalweight kg
PN bar
DN1 L1mm
Lmm
DN mm
AVK ref. nos.Type
Series 712/7564
EUDouble Flangedcouplingnon tensileMecanical Jointfor DI pipesStandard flangedrilling to ISO7005-2,EN1092-2: 1997Epoxy coatedaccording to DIN30677-2 andGSK guide linesDN 80-300
1
176,002210/161659580712-0080-75641209,002610/1619095100712-0100-75641336,004110/16245105150712-0150-75641496,006116300140200712-0200-75641697,008516355155250712-0250-75641
1.033,0012616410170300712-0300-75641
Fittings
Products for water according to EN545
EN 545
52 2007-07-10 11:28 CET
Gross priceEUR
Theoreticalweight kg
PN bar
Lmm
DN mm
AVK ref. nos.Type
Series 78/82
Concrete Wallsleve withpuddle flangeStandard flangedrilling to ISO7005-2,EN1092-2: 1997Epoxy coated according to DIN 30677-2 andGSK guide linesDN 50-400
001
405,001610/164955078-050-8210001405,002110/165106078-060-8210001479,002810/165208078-080-8210001588,003410/1653010078-100-8210001741,004410/1655512578-125-8210001871,005310/1657015078-150-8210001958,00731660020078-200-8210001
1.350,001041663025078-250-82100011.873,001361666530078-300-82100012.614,001751675435078-350-82100013.136,002111680540078-400-8210001
Others
Products for water according to EN545
EN 545
53 2007-07-10 11:28 CET
The AVK Group (Valves & Fittings Division)
Denmark
AVK Holding A/S
Søndergade33
DK-8464Galten
Denmark
Tel: +4586943888
Fax: +4586944833
AVK INTERNATIONAL A/S
Bizonvej1,Skovby
DK-8464Galten
Denmark
Tel: +4587542100
Fax: +4587542120
e-mail:[email protected]
e-mail:[email protected]
www.avkvalves.com
AVK Tooling A/S
Granlyvej2,
P.O.Box49
DK-9300Sæby
Denmark
Tel: +4598461711
Fax: +4598467061
e-mail:[email protected]
Flonidan DC A/S
Islandsvej29
DK-8700Horsens
Denmark
Tel: +4575618888
Fax: +4575626088
e-mail:[email protected]
www.flonidan.dk
Q-TRANSPORTMATERIEL A/S Hjaltevej16,Skovby
DK-8464Galten
Denmark
Tel: +4586943277
Fax: +4586946532
e-mail:[email protected]
www.q-system.dk
AVK GUMMI A/S Mosegårdsvej1
DK-8670Låsby
Denmark
Tel: +4586951311
Fax: +4586951085
e-mail:[email protected]
www.avkgummi.dk
J.C. Hansens Metalvarefabrik ApS Karetmagervej21
DK-7100Vejle
Denmark
Tel: +4575858408
Fax: +4575858082
e-mail:[email protected]
www.jchansen.dk
Rest of Europe
AVK Mittelmann Armaturen GmbH
Schillerstraße50
D-42489Wülfrath
Germany
Tel.: +492058-901-01
Fax: +492058-901-110
e-mail:[email protected]
AVK Norge AS
Hågasletta7
N-3236Sandefjord
Norway
Tel: +4733482999
Fax: +4733482982
e-mail:[email protected]
www.avk.no
Rep. Office, Finland Pakkalankuja7
01510Vantaa
Finland
Tel.: +358-9-47308410
Fax: +358-9-47308999
AVK Polska Sp. z o.o.ul.Jakubowska1
PL-62-045Pniewy
Poland
Tel: +48612910000
Fax: +48612911000
e-mail:[email protected]
AVK Armadan Sp. z o.o.ul.Jakubowska1
PL-62-045Pniewy
Poland
Tel: +48612912001
Fax: +48612912033
e-mail:[email protected]
Rep. Office, Romania
P-taAlbaIulianr.6bl.I5,
sc.Cap.71sect.3
Bucharest
Romania
Tel: +40213265017
Fax: +40213265018
e-mail:[email protected]
AVK Plastics BV Gaaikemastraat62
P.O.Box49
NL-8560AABalk
TheNetherlands
Tel: +31514604604
Fax: +31514602882
e-mail:[email protected]
AVK Nederland BV Radeweg12,P.O.Box73
NL-8170ABVaassen
TheNetherlands
Tel: +31578574490
Fax: +31578574459
e-mail:[email protected]
Wouter Witzel Eurovalves BV IndustrieterreinDePol12
7581CZLosser
P.O.Box54
NL-7580ABLosser
TheNetherlands
Tel: +31(0)535369536
Fax: +31(0)535369500
e-mail:[email protected]
AVK Rewag BV Schorsweg1
NL-8171MEVaassen
TheNetherlands
Tel: +31578560602
Fax: +31578560601
e-mail:[email protected]
AVK Belgium NV Zoomstraat6A
B-9160Lokeren
Belgium
Tel: +3293481313
Fax: +3293493964
e-mail:[email protected]
AVK FRANCE S.A.
33,RueAndréBoulle
CS2904
F-41029BloisCedex
France
Tel: +33254742313
Fax: +33254742827
e-mail:[email protected] AVK Haut Marnaise S.A.
5,RueMauclère
B.P.24
F-52301JoinvilleCedex
France
Tel: +33325944800
Fax: +33325941732
e-mail:[email protected]
AVK Válvulas, S.A. PolígonoIndustrialFrancolí
Parcela27
E-43006Tarragona
Spain
Tel: +34977543008
Fax: +34977541622
e-mail:[email protected]
Aqua-Gas Manufacturing Ltd. ArnsleyRoad
Weldon,Corby
UK-Northants
NN175QW
UnitedKingdom
Tel: +441536275910
Fax: +441536204256
e-mail:[email protected]
Aqua-Gas AVK Ltd. P.O.Box143,
Rushmills
UK-Northampton
NN47ZU
UnitedKingdom
Tel: +441604601188
Fax: +441604604818
e-mail:[email protected]
Glenfield Valves Ltd.
QueensDrive
Kilmarnock,Ayrshire
Scotland
KA13XF
Tel: +441563521150
Fax: +441563545616
e-mail:[email protected]
AVK Manufacturing Ltd. P.O.Box46,RuscoeWorks,
DunkirkLane,Hyde
UK-Cheshire
SK144PN
UnitedKingdom
Tel: +441613667777
Fax:+441613685719
e-mail:[email protected]
Bryan Donkin Valves Ltd. DerbyRoad
UK-Chesterfield
S402EB
UnitedKingdom
Tel: +441246500029
Fax:+441246297455
e-mail:[email protected]
www.donkinvalves.com
Donkin
DerbyRoad
UK-Chesterfield
S402EB
UnitedKingdom
Tel: +441246558707
Fax: +441246558712
e-mail:[email protected]
www.donkinvalves.com
Africa
AVK Valves Southern Africa (Pty) Ltd. P.O.Box1025
ZA-Hartenbos6520
SouthAfrica
Tel: +27446951626
Fax: +27446951310
e-mail:[email protected]
Middle East
Saudi Valves Manufacturing Co. Ltd. JeddahIndustrialCity
Phase4,Streetno.LO404
P.O.Box10830
KSA-21443Jeddah
KingdomofSaudiArabia
Tel: +96626371570
Fax: +96626379380
e-mail:[email protected]
AVK Middle East Suite203,BlockB
oftheArencoBuilding
inKarama,Dubai,UAE
Tel: +97143366396
Fax: +97143369908
e-mail:[email protected]
America
American AVK Co. 2155MeridianBlvd.
Minden,NV89423 USA
Tel: +17755521400
Fax: +17757837502
www.americanavk.com
American AVK Co.7241PeppermillParkway
NorthCharleston,SC29418
USA
Tel: +18435525557
Fax: +18435528852
e-mail:[email protected]
AVK Overseas, Latin America & the Caribbean
7636N.Ingram,Suite104
Fresno,CA-93711
USA
Tel: +15594510435
Fax: +15594510437
e-mail:
AVK Overseas Rep. Office, Grenada MorneJaloux,
St.George’s
Grenada
Tel: +473-435-1019
Fax: +473-435-1018
e-mail:[email protected]
Australia AVK Australia Pty Ltd 559AGrandJunctionRoad
AUS-Wingfield,S.A.5013
Australia
Tel: +61883680900
Fax: +61883680970
e-mail:[email protected]
www.avkvalves.com.au
Asia
AVK Overseas (Asia) AVKValvesManufacturing
MalaysiaSdnBnd
LotNo.1,JalanSg.Chadong8
Batu51/2Mile,JalanKapar
MY-42100Klang
SelangorDarulEhsan
Malaysia
Tel: +60332918270
Fax: +60332914257
e-mail:
AVK Overseas (Asia) AVK Vietnam 6thFloor,14NguyenVanNgoc
BaDinhDistrict
Hanoi
Vietnam
Tel: +8447666929
Fax: +8447666928
e-mail:[email protected]
www.avkvalves.com
AVK Valves Company Hong Kong Ltd. UnitsC&D
10thFloor,Centre600
82KingLamStreet
CheungShaWan,Kowloon
HongKong
Tel: +85227730846
Fax: +85227731164
e-mail:[email protected]
AVK Valves (Shanghai) Co., Ltd.UnitA,7/F,
EastTower,Hi-TechKingWorld
668BeijingEastRoad,
HuangpuDistrict
Shanghai,People’sRepublicofChina
PostCode:200001
Tel: +862153087733
Fax: +862153089989
e-mail:[email protected]
AVK Valves (Anhui) Co., Ltd. No.20HengjiangStreet
Hexian
ChaohuCity238200
AnhuiProvince
People’sRepublicofChina
Tel: +865655351327
Fax: +865655351379
e-mail:[email protected]
AVK Philippines Inc. (formerlyAqua-GasValves&
FittingsCorp.)
#100E.RodriguezJr.Avenue
cornerDonaJuliaVargasAvenue,
Brgy.Ugong,1604PasigCity,
ThePhilippines
Tel: +6329106205/6206
+6326716698/6585/6581
Fax:: +6329106207
e-mail:[email protected]
The AVK Group (Valves & Fittings Division)
T h e A V K G r o u p
A V K G l o b a l p r o d u c t o f f e r i n g
G e o g r a p h i c a l re g i o n s c o v e re d b y t h e AV K G ro u p
1/1-
2007
ContinentalEurope,Russia,NorthernandCentralAfrica,SouthEasternEurope-AVK International A/S
AVKSalesCompanies:AVK Norge AS AVK Mittelmann Armaturen GmbH AVK Nederland BV AVK Belgium NV AVK Armadan Sp. z o.o. AVK FRANCE S.A. AVK Válvulas, S.A. UKandIreland-Aqua-Gas AVK Ltd.
NorthAmerica-American AVK Company
AustralAsia-AVK Australia pty Ltd
TheArabianPeninsula-Saudi Valves Manufacturing Co. Ltd.
LatinAmericaandtheCaribbean-AVK overseas
Asia-AVK overseas
ChinaandHongKong-AVK China
SouthernAfrica-AVK Valves Southern Africa (pty) Ltd.