1

PRODUCT OVERVIEW

The Storm Optics Avenger Thermal Clip-on Scope is exceptionally lightweight and compact. It can be simply mounted in front of the daytime scope using a clip-on mounting system, making the conversion quick and easy since no re-zeroing is required.The clip-on is built with the superb Germanium optics that is paired with advanced Vanadium Oxide (VOx) uncooled thermal core and proprietary electronics. The Avenger Thermal Clip-on Scope comes with a menu that is easy to understand and navigate. In addition, the control buttons are designed with the tactile elements allowing the user to operate without looking at the buttons. The device is nitrogen-purged, and is water-, dust- and shock-proof. For optimum performance, there is a wide range of menu-driven options including switchable image polarity. The Avenger Clip-on Scope is action ready in virtually any environment or light conditions including conditions when the environmental obscurants such as smoke, dust, haze, fog, are present.

KIT INCLUDES

• Avenger Thermal Clip-on Scope• Front lens flip-up protective cap• Soft Carrying Case• 2xCR123 Batteries• Lens Cleaning Cloth• Instruction manual• Video-out cable

INSTRUCTION MANUAL

FEATURES

• Superior for medium- and long-rangeengagements

• Automatic shatter based thermal core• Automatic or manual Shutter Calibration• High resolution AMOLED Display• Precise internal lens focusing mechanism• Manual display brightness adjustment• Switchable image polarity: White Hot / Black Hot

/ Colored Hot• Ability to center the screen with respect to the

viewed reticle• Battery status indicator• Can be used with heavy recoil weapons,

including .300 WIN, .338LM and .50 cal.• Video Out

www.sportoptics.com

AVENGER THERMAL CLIP-ON SCOPE

2

SPECIFICATIONS

Product Modification AVENGERProduct SKU# SO43150

Optical Magnification, Clip-On Mode 1.0x

Objective lens system 50mmF/1.2

Angular FOV at 1.0x (horizontal x vertical), degree 6.5° x 5.0°

Focus range, yds / m 5.5 / 5 to infinity

Core resolution, pxl 336x256

Pixel pitch, µm 17

Image refresh rate, Hz 30

Thermal Sensitivity (NETD), mK < 50

Display type and resolution, pxl SVGA AMOLED 800x600

Start-up time, min., sec. 5

Object type and size, approx., ft² / m² 8 / 0.75 25.8 / 2.4

Detection, approx., yds / m 1100 / 1000 2200 / 2000

Recognition, approx., yds / m 330 / 300 990 / 900

Identification, approx., yds / m 190 / 170 440 / 400

Dimensions, in / mm 8.27”x2.95”x2.95” / 208x75x75

Weight, approx., oz/g 19.9 / 565

Power supply standard CR123 (two)

Estimated battery life, hour Up to 4

Operating temperature, °F/°С -40° to +122° / -40° to +50°

Water intrusion IPX67

Humidity, % Up to 98%

OPTIONAL ACCESSORIES

• Avenger is compatible with the following optional accessories:• Rubber Eye Guard (Light Suppressor)• 2.0x eyepiece (BE80220) to convert the device into a 2.0x Thermal magnifier that can be coupled with

M52/37 Camera/Video Adapter• Rifle Mount• Throw level adaptor (below table shows the most popular diameters, however, there are total 38 sizes

available that can be special ordered

SKU- Diameter, mmBE80930- 30 BE80936- 36 BE80940- 40 BE80942- 42 BE80946- 46 BE80948- 48 BE80950- 50 BE80952- 52

SKU- Diameter, mmBE80957- 57 BE80958- 58 BE80960- 60BE80962- 62 BE80964- 64 BE80968- 68BE80972- 72BE80980- 80

Optical Magnification, Sight Mode 2.0x, 4.0x, 8.0x

3

WARNINGS AND CAUTIONS

This device contains highly specialized and sensitive internal electronics. Handle with care. This device contains no operator serviceable components. Contact Storm Optics customer support if you cannot diagnose an issue. Opening the device housing WILL void the warranty.

WARNING Ensure that the device is powered off before installing or removing batteries. Failure to do so could result in the damage sensitive internal electronics. WARNING Do not mix rechargeable and non-rechargeable CR123 batteries.

CAUTION Do not store the device with the batteries installed.

WARNING Do not disassemble, puncture, recharge, or expose the battery to fire or high temperature. Doing so may result in an explosion and chemical burns. When the device is not in operation for a prolonged period, remove the battery from the device and keep it separately in a cool and dry place.

WARNING Do not operate in a potentially explosive environment, near gasoline fumes or other volatile materials. This is a high voltage electrical device.

WARNING Do not aim this device at the high-intensity sources like the sun, flame etc. This may damage the product.

WARNING Avoid direct sun beams through the eyepiece. Focused light beams can burn and damage the device screen.

NOTE Presence of one or several segments (spots, stripes) of a brighter or darker gradation in the field of view is normal. The segments often appear in cases of large temperature difference between the observer’s location and surrounding space (for example, viewing from a warm room through an open window).

WARNING Use of Thermal vision attachments or riflescopes on a rifle may be restricted or prohibited by national or local regulations. Please consult with local authorities as to whether you are allowed using the night vision scope on your weapon legally in your area.

WARNING Avoid exposure to water - Even though the device is water resistant, excessive exposure could damage the electronics.

CAUTION Presence of one or several segments (spots, stripes) of a brighter or darker gradation in the field of view is normal. The segments often appear in cases of large temperature difference between the observer’s location and surrounding space (for example, viewing from a warm room through an open window).

NOTE Failure to observe warnings, product use instructions and storage recommendations may void the warranty.

ATTENTION!

For the most optimal user experience, Please read this manual thoroughly before operating this device. And keep this manual in a safe place for future reference.

4

BATTERY INSTALLATION

Unscrew the Battery Compartment Cover (12) by turning counterclockwise the Battery Compartment Cover Thumb Screw (13). See Image 3.• Inspect the battery compartment for any corrosion and/or

moisture.• Insert two new 3V CR123 batteries observing the battery polarity

diagram located on the side walls of each battery compartment.Replace the Battery Compartment Cap (12) and tighten BatteryCompartment Cover Thumb Screw (13).

ATTENTION Low battery can cause the viewed image distortion. Pay attention to the low battery indicator and timely replace the batteries.

1. Power ON/OFF button2. MENU BACK/EXIT button3. MENU/SELECT/POLARITY button4. DISPLAY BRIGHTNESS/

NAVIGATION button5. DISPLAY BRIGHTNESS/

NAVIGATION button6. Eye Piece7. Fastening Ring with retention screws8. Ambient Light Sensor9. Front Objective Lens10. Focus Adjustment Knob11. Objective Lens Flip-up Cap12. Battery Compartment Cover13. Battery Compartment Cover

Thumb Screw14. Plug-in interface15. Throw-lever adaptor16. Lever of the throw-level adaptor

PARTS IDENTIFICATION AND OPERATING CONTROLS

Image 1

34

11 6

Image 2

1014

1516

12

13

Image 3

9

12

13

17

2

85

5

WARNING DANGER OF EXPLOSION Lithium batteries contain sulfur dioxide gas under pressure and should be handled in the following manner:

• Do not attempt to heat, puncture, disassemble, short circuit, recharge, or otherwise tamper with thebatteries.

• Turn OFF the device if the battery compartment becomes unusually hot. If possible, wait until the batteryhas cooled before removing them.

• The batteries have safety vents to prevent an explosion. When they are venting gas, you will smell it (veryirritating) or hear the sound of gas escaping. After engagement of the safety vents, the batteries are fairlysafe from bursting, but will be hot, therefore must be handled with care.

• Do not carry batteries in pockets containing metal objects such as coins, keys and etc. Metal objects cancause batteries to short circuit and become very hot.

• Do not mix rechargeable and non rechargeable CR123.• It is not recommended to use mismatched batteries.

MOUNTING

The optional throw-lever clamping adaptors enable mounting the Avenger Thermal Clip-on Scope directly in front of the daytime riflescope. The custom sized adaptor can be fitted straight onto the scope objective lens, making the conversion quick and easy without loss of zero.

• To perform initial adjustment, loosen the locking screw(17) of the “Throw-Lever” adapter (15) using a 2mmAllen wrench and pull the lever (16) in the uprightposition, see Image 4. To check fitting, insert the frontobjective lens of the day scope. Lower the lever (16)to locked position.

• To mount, loosen the retention screws of the fasteningring (7). Thread the “Throw-Lever” adapter onto theAvenger Thermal Clip-on Scope. Then pull the lever(16) of the “Throw-Lever” adapter to upright position toloosen the assembly and insert the front objective lensof the day scope into the “Throw-Lever” adapter (15).Lower the lever (16) to the locked position. See Image2 for the assembly picture.

• To secure the assembly, tighten the retainer bolt (18) of the “Throw-Lever” adapter using a 4mm Allenwrench and the locking screw (17) using a 2mm Allen wrench. Also secure the retention screw of the clip-on fastening ring (7).

• Adjust the focus adjustment knob (10) for a clear and sharp image. Note that the image quality works inconjunction with the settings of the daytime riflescope.

Image 4

16

18

17

6

RAIL MOUNTING

The Avenger is mounted onto the rifle using a single lever Quick Release Weaver mount (16). To mount the Avenger Thermal Scope:

• Pull the lever (17) to the open position, see Image 4.The spring loaded clamp should be extended. Test fitthe mount on the rail and attempt to close the leverin the position shown in Image 5. If too tight or loose,remove and adjust accordingly.

• To adjust the clamp, open the lever, manually squeezethe mount clamp towards the closed position. Thelever post with retaining nut (18) will extend out of themount. Turn the screw to the left or right to adjust andrepeat the test fit procedure until mount lever (17) canbe completely closed but not loose.

• Once the mount (16) has been set up to fit the railproperly, mount the device for the most comfortableeye relief.

OPERATION

TO TURN ON/OFF • Install the batteries per the BATTERY INSTALATION instructions. Open the protective front lens cap (11).• To turn on, press and hold the power button (1) for about 5 seconds of clicks. See Image 4 for operating

controls identification diagram. The shutter will click 2 times followed by the Storm Optics logo shownmomentarily on the display before showing the thermal image.

• To turn off, press and hold the power button (1) for 3 seconds.

FOCUSINGTo adjust optical focus, rotate the focus adjustment knob (10) located on the objective lens hood until the desired image clarity is achieved. NOTE: The eye piece has no diopter adjustment ring. If the device is not paired with a day scope, wear the regular prescription glasses or contact lenses to view through the device.

CAUTION Improper installation of after-market mounting hardware can lead to permanent damage and/or affect the units ability to hold zero. If mounting on a “heavy-recoil” rifle, for safety purposes, allow at least .5” or more additional eye relief.

BUTTONS FUNCTIONALITY / BRIGHTNESS AND POLARITY ADJUSTMENT

The buttons operate in 2 ways: Momentary Press or Quick Press (Press/release) and Press/Hold (Press/Hold for several seconds).CAUTION: Do not press device buttons with objects. This could damage the rubber coating as well as the button mechanisms. When depressed properly the buttons will give a tactile feedback which feels like a click.

Image 5 Image 6

Image 7

Lever shown in OPEN position

Lever shown in CLOSED position

125

3

4

17

16

18

7

MENU BACK / EXIT button (2): When in Menu mode, use this button to exit the menu or return to the previous menu screen.NOTE: While there are DIGITAL ZOOM pictograms on the device body, the digital zoom function is not valid in the clip-on application.

MENU / SELECT / POLARITY button (3): Adjust polarity by momentarily pressing the MENU button (3). NOTE: Image polarity selection will cycle between HOT WHITE, HOT BLACK and the preferred color scheme, selected in the COLOR SCHEME menu. To enter the menu press and hold MENU button (3) for 3 seconds. To navigate through the menu use NAVIGATION buttons (4) and (5). Make menu selections by momentarily pressing MENU button (3). To navigate to the previous menu screen or to exit the menu, press MENU BACK/EXIT button (2) until the menu screen disappears from the display.

DISPLAY BRIGHTNESS / NAVIGATION buttons (4), (5): Increase display brightness by pressing DISPLAY BRIGHTNESS increase button (5) repeatedly. Decrease display brightness by pressing DISPLAY BRIGHTNESS decrease button (4) repeatedly until the desired setting is reached.

MENU REFERENCE GUIDE

MENU MODE button function quick reference guide• To scroll DOWN, use NAVIGATION button (4)• To scroll UP, use NAVIGATION button (5)• To make a selection, press momentary MENU / SELECT / button (3)• To return to the previous menu screen, press MENU BACK / EXIT button (2)

MAIN MENU

To enter the menu press and hold MENU button (3) for 3 seconds. The menu titled CLIP-ON SETTINGS will appear in the center of the screen (See Image 6). NOTE: To enter the menu mode, the press and hold button action is imperative. The quick press will adjust the image polarity. See BUTTONS FUNCTIONALITY section for more information.To move up or down the list, use NAVIGATION buttons (5) and (4). To make a selection, press the MENU button (3). The selection will be encircled in red line. To exit, press EXIT button (2).

APPLICATION Informational menu option to view that the CLIP-ON mode is engagedCENTER ADJUSTMENT Select to adjust the screen positioning with the respect to the reticleCOLOR SCHEME Select to view and set the image polarity color schemeSERVICE Select to get to the SHUTTER and AUTO BRIGHTNESS settings menu INFO Displays the device technical specifications when selected

CENTER ADJUSTMENT

The menu option designed to align the screen of the thermal clip-on with the respect to the reticle viewed though the daytime scope. • Select CENTER ADJUSTMENT from the main menu. Press the

MENU button (3) to enter.• To adjust horizontally, select HORIZONTAL ADJ. Press the

MENU button (3) to proceed. Two red directional arrows, onepointing to the right and another pointing to the left, will appear

Image 8

Image 9

View through the device

8

COLOR SCHEME MENU

• Select COLOR SCHEME from the main menu. Press the MENU button (3) to enter.• Available Color Scheme options are RED-GREEN, RED-BLUE, SPECTRUM -1, SPECTRUM -2,

SPECTRUM -3, SEPIA, B&W&RED HOT. Use NAVIGATION buttons (5) and (4) to move up and down. Theselection will be encircled in red line. To exit, press EXIT button (2).

NOTE: The selection made here will be the preferred color scheme when the image polarity is adjusted. The image polarity selection will cycle between HOT WHITE, HOT BLACK and the set preferred color scheme.

SERVICE MENU

Select SERVICE from the main menu. Press the MENU button (3) to enter. Use NAVIGATION buttons (5) or (4) to make a selection. The selection will be encircled in red line. To exit, press EXIT button (2).

SHUTTER Select to adjust the Automatic Shutter ON or OFFLANGAUGE Currently only ENGLISH option is available. AUTO BRIGHTNESS Select to adjust the Automatic Brightness Control ON or OFF

SHUTTER MENU

This menu option allows adjusting the Automatic Shutter, Use NAVIGATION buttons (5) or (4) to make a selection. The selection will be encircled in red line. To exit, press EXIT button (2).

AUTO BRIGHTNESS MENU

This menu option allows adjusting the Automatic brightness adjustment. Use NAVIGATION buttons (5) or (4) to make a selection. The selection will be encircled in red line. To exit, press EXIT button (2).NOTE: The brightness adjustment feature becomes disabled if AUTO BRIGTNESS is set “ON” in the SERVICE menu.

STORAGE AND MAINTENANCE

• Store and carry the device in the closed bag with the protective objective lens cap on.• Avoid impacts, moisture and sharp changes of temperature. The optics should be protected against dust,

snow, rain and direct sun rays.• Store the device in dry conditioned premises without battery away from sources of heat, such as heating

appliances or central heating.• Do not store the device at temperatures lower than 10oC (50oF) or higher than 60oC (140oF).• Remove batteries during extended periods of non-operation to avoid battery leakage.• Clean optical surfaces with clean lens cloth.• Wipe the device housing with lightly damped clean lint-free cloth.

on the screen, see Image 5. To adjust to the right, press repeatedly NAVIGATION button (4). To adjust to the left, press repeatedly NAVIGATION button (5). To exit, press EXIT button (2).

• To adjust vertically, select VERTICAL ADJ. Press the MENU button (3) to proceed. Two red directionalarrows, one pointing up and another pointing down will appear, see Image 5. To adjust up, press repeatedlyNAVIGATION button (4). To adjust down, press repeatedly NAVIGATION button (5). To exit, press EXITbutton (2).

• The information about the direction and the value of adjustment made will be displayed in the center of thescreen.

9

PREVENTIVE MAINTENANCE CHECKS

# IntervalLocation

(Item to Check/Service)

ProcedureNot Fully Mission

Capable if:

1 Before/After Optical SurfacesInspect lens for dirt, fingerprint residue, chips, or cracks. If necessary, clean and dry lens with water and lens tissue.

Scratches or chips hinder the vision when the device turned on, or if cracks are present.

2 Before/After External Surfaces Inspect for cracks or damage. Scratches and gouges are OK if operation is not affected. Cracked or damaged.

3 Before/After Battery Cap, Compartment

Check to make sure battery cap is present and in working condition. Remove battery and inspect for corrosion, moisture or cracks. Ensure o-ring is present and is not dry or cracked. Battery Cap retainer is present and clear of damage.

Cap is missing, corroded or damaged. O-ring is missing or cracked. Battery Cap retainer is missing or damaged.

4 Before/After Operating Buttons Ensure the button functionality.One or more buttons are non-operational. The button is missing or broken.

5 Before/After Viewed Image Inspect displays for operational defects. Flashing or shading is observed.

OPTICS: Always clean the optics with a suitable optical cleaning cloth. Do not use detergents or excessive moisture to clean any part of the Device.BATTERY / BATTERY COMPARTMENT: Remove the batteries when storing the device for a long period of time.MOISTURE: The device is waterproof, however; no warranties or guarantees apply to a device that has been submerged in water.SALT WATER: If the unit is exposed to salt water, wipe it off with a clean damp cloth and dry thoroughly.CAUTION: The device is a precision electro-optical instrument and must be handled carefully. Do not scratch the external lens surfaces or touch them with your fingers.

TROUBLESHOOTING PROCEDURES

Mulfunction Test or Inspection Corrective Action

Device fails to activate

a) Not holding the POWER ONbutton for sufficient time to start upthe deviceb) Dead or weak batteriesc) Check for defective, missing orimproperly installed batteries.d) Battery cap is loose, no contact.

a) Press and hold POWER ON button for at least 5seconds.

b) Replace batteriesc) Reinstall batteries

d) Tighten cap.

No visible imagea) Objective lens cap has not beenremoved.b) Weak batteries.

a) Remove cap.

b) Replace batteries.Device shuts down after being "ON" a) Weak batteries. a) Replace batteries.

Device froze off- does not react to any control buttons or power "ON/OFF" switch

a) Remove batteries from the battery compartment. Reinstall batteries to resume operation.b) Contact Storm Optics for service.

Image dimmer than usual a) Weak batteries. Replace the batteries.

Blurry image a) Check focus. a) Adjust focus adjustment knob

10

Mulfunction Test or Inspection Corrective Action

Poor image quality. a) Check focus.b) Check for fogging or dirt on lens-es.

a) Refocus.b) If image quality is still poor, contact Storm Optics for service.

No brightness adjustment function

a) Check AUTO BRIGHTNESS set-ting in the SERVICE menu

a) AUTO BRIGHTNESS shall be set “NO” in the SER-VICE menu

Battery compartment is difficult to open.

a) Visually inspect for the presenceof an o-ring.b) Check for a damaged battery cap.

a) If O-ring is missing, contact manufacturer forassistance.b) If damaged, return to manufacturer.

Device does not shut OFFa) Remove batteries from the battery compartment.Reinstall batteries to resume operation.b) Return device to manufacturer if the situation persist.

STORM OPTICS WARRANTY POLICY

The Storm Optics product is warranted free of defects in workmanship and materials. In the event of defect under this warranty, we will, repair or replace the product. For thermal devices where the thermal core enables the thermal capability for a period of 2 years. For night vision products, the image intensifier tube that enables night vision capability is warranted to be free from defects for a period of 1 year for Gen 1 and Gen 2+, 2 years for select Gen 2+ models and 3 years for Thermal Vision and Gen 3 models, as are other light emitting devices such as red dots, and holographic imaging devices. However, light bulbs and batteries are not applicable to this warranty. This warranty does not cover damages caused by misuse or improper handling. Also, this warranty is null and void if modification or maintenance is provided by a third party not authorized by Storm Optics. Any product returned under this warranty or for repair must be accompanied by the following items:• Return Authorization Number (RA#)- to obtain RA#, email to service@sportoptics.com. Write RA# on thetop of the shipping box.• A brief letter explaining the problem• Defective product• Copy of the original receipt showing when and where the product was purchased• Contact person name, address and a daytime phone number.The product shall be sent in the sturdy package to prevent damage in transit with postage prepaid to thefollowing address:Storm Optics Return Service1715 South Morrison Blvd.Hammond, LA 70403

STATEMENT OF LIABILITY

Storm Optics will not be liable for any claims, actions, suits, proceeding, costs, expenses, damages or liabilities arising from the use of this product. Operation and use of the product are the sole responsibility of the user. The provision of products sold and services performed by manufacturer to the user shall not be interpreted, construed, or regarded, either expressively or implied, as being for the benefit of creating any obligation toward any third party of legal entity outside manufacturer and the user. The remedies of the purchaser set forth herein are exclusive and the total liability of manufacturer shall not exceed the purchase price of the unit. The user is solely responsible to comply with local and national laws regarding use of this product. In no event shall manufacturer be liable for consequential, incidental, special or other damages. Storm Optics reserves the right to make alterations or modifications in its products at any time, which in its opinion may improve the performance and efficiency of the product. It shall not be obligated to make such alterations or modifications to products already in service.

11

EXPORT DISCLAIMER

Export of some the Storm Optics products is strictly prohibited without a valid export license issued by the U.S. Department of State, in accordance with International Traffic in Arms Regulations (ITAR) (22 C.F.R. 120-130) or a valid export license issued by the U.S. Department of Commerce, in accordance with the Export Administration Regulations (EAR) (15 C.F.R. 730-774). U.S. law prohibits the sale, transfer, or export of items to certain restricted parties, destinations, and embargoed countries, as identified on lists maintained by the U.S. Department of State, the U.S. Department of Commerce, and the U.S. Department of Treasury.It is unlawful and strictly prohibited to export, or attempt to export or otherwise transfer or sell any hardware or technical data or furnish any service to any foreign person, whether abroad or in the United States, for which a license or written approval of the U.S. Government is required, without first obtaining the required license or written approval from the Department of the U.S. Government, having jurisdiction. Diversion contrary to U.S. law is prohibited. It is the responsibility of the Customer to be aware of these lists, which can be found at the U.S. Government websites. By proceeding with any transaction, the Customer certifies that the Customer will not engage in any unauthorized transaction involving the export of the Storm Optics products to any restricted parties or destinations.

www.sportoptics.com

Storm Optics1715 South Morrison Blvd. Hammond, LA 70403 Phone: 800-720-9625