AVantage Liquid Photopolymer Ancillary Items
-
Upload
anderson-vreeland -
Category
Documents
-
view
228 -
download
0
description
Transcript of AVantage Liquid Photopolymer Ancillary Items
Toll-Free: 866.282.7697 • Toll-Free Fax: 800.223.6869 • www.AndVre.com • [email protected]
For 50 years, A&V has supplied materials and equipment that
are good for you and good for the environment.
Matte & Clear Cover FilmAVCOV
AVantage® matte and clear cover film is easy to handle and easy to work with during photopolymer
platemaking. The matte finish of this film creates of unique, microscopic
finish to the printing plate that reduces tack and improves
ink transfer.
Anderson & Vreeland offers a range of AVantage® ancillary and
specialty products used in the production of liquid photopolymer plates. For more information about the products that will work best for
your application, please visit our website or contact your Anderson
& Vreeland representative.
Easy to Handle Cover Film
Choose from a complete selection of AVantage® liquid photopolymer resins designed to meet the increasing demands of the packaging, molding and stamp industries for improved print quality and consistency. AVantage® liquid photopolymers help control costs and reduce environmental impact.
Packaged in 34.375" x 1700' rolls.
Toll-Free: 866.282.7697 • Toll-Free Fax: 800.223.6869 • www.AndVre.com • [email protected]
For 50 years, A&V has supplied materials and equipment that
are good for you and good for the environment.
Washout SolutionAVWASHOUT
AVantage® Washout Solution is a specially formulated liquid detergent
that breaks down and emulsifies AVantage® liquid photopolymer resin
during the washout cycle. It has superior chemistries that ensure a
clean and consistent washout each and every time.
Anderson & Vreeland offers a range of AVantage® ancillary and specialty products used in the production of
liquid photopolymer plates. For more information about the products that
will work best for your application, please visit our website or contact your
Anderson & Vreeland representative.
Breaks Down and Emulsifies
Photopolymer Resin
Choose from a complete selection of AVantage® liquid photopolymer resins designed to meet the increasing demands of the packaging, molding and stamp industries for improved print quality and consistency. AVantage® liquid photopolymers help control costs and reduce environmental impact.
Packaged in 5-gallon plastic containers. Drums are also available.
Toll-Free: 866.282.7697 • Toll-Free Fax: 800.223.6869 • www.AndVre.com • [email protected]
For 50 years, A&V has supplied materials and equipment that
are good for you and good for the environment.
Plate SubstratesAVSUB
AVantage® 4 and 7 mil plate substrates are a polyester-based
backing sheet and offer excellent adhesion to AVantage® liquid
photopolymers for conventional and in-position plates for
flexographic printing.
Anderson & Vreeland offers a range of AVantage® ancillary and
specialty products used in the production of liquid photopolymer plates. For more information about the products that will work best for
your application, please visit our website or contact your Anderson
& Vreeland representative.
Polyester Backing Sheet Offers Excellent Adhesion
Choose from a complete selection of AVantage® liquid photopolymer resins designed to meet the increasing demands of the packaging, molding and stamp industries for improved print quality and consistency. AVantage® liquid photopolymers help control costs and reduce environmental impact.
Packaged 100 sheets (34" x 58") per box.
Toll-Free: 866.282.7697 • Toll-Free Fax: 800.223.6869 • www.AndVre.com • [email protected]
For 50 years, A&V has supplied materials and equipment that
are good for you and good for the environment.
Post Exposure SaltAVSALT
AVantage® Post Exposure Salt facilitates the detacking of AVantage® liquid photopolymer printing plates.
AVSALT is mixed with warm water in the post exposure solution tray. The
photopolymer plate is then submerged in the post exposure solution and
exposed to ultraviolet light to complete the detacking process.
Anderson & Vreeland offers a range of AVantage® ancillary and specialty products used in the production of
liquid photopolymer plates. For more information about the products that
will work best for your application, please visit our website or contact your
Anderson & Vreeland representative.
Facilitates DetackingPhotopolymer Plates
Choose from a complete selection of AVantage® liquid photopolymer resins designed to meet the increasing demands of the packaging, molding and stamp industries for improved print quality and consistency. AVantage® liquid photopolymers help control costs and reduce environmental impact.
Packaged in 5 lb. plastic containers.
Toll-Free: 866.282.7697 • Toll-Free Fax: 800.223.6869 • www.AndVre.com • [email protected]
For 50 years, A&V has supplied materials and equipment that
are good for you and good for the environment.
Liquid DeveloperAVDEV
AVantage® Liquid Developer serves as a dispersant to ensure a
consistent formulation of the developer bath (comprised of AVWashout Solution
and AVDefoamer) required to process liquid photopolymer printing plates.
Anderson & Vreeland offers a range of AVantage® ancillary and specialty products used in the production of
liquid photopolymer plates. For more information about the products that
will work best for your application, please visit our website or contact your
Anderson & Vreeland representative.
Maintains Consistent Developer Formulation
Choose from a complete selection of AVantage® liquid photopolymer resins designed to meet the increasing demands of the packaging, molding and stamp industries for improved print quality and consistency. AVantage® liquid photopolymers help control costs and reduce environmental impact.
Packaged in 5-gallon plastic containers. Drums are also available.
Toll-Free: 866.282.7697 • Toll-Free Fax: 800.223.6869 • www.AndVre.com • [email protected]
For 50 years, A&V has supplied materials and equipment that
are good for you and good for the environment.
DefoamerAVDEFOAM
AVantage® Defoamer is a silicone emulsion defoamer that
minimizes foam in developer baths that use AVantage® Washout Solution
or similar detergent. Reducing foam in the developer bath improves the
spray pressure required to effectively wash out resin from AVantage® liquid
photopolymer printing plates after the exposure process.
Anderson & Vreeland offers a range of AVantage® ancillary and specialty products used in the production of
liquid photopolymer plates. For more information about the products that
will work best for your application, please visit our website or contact your
Anderson & Vreeland representative.
Minimize Foam to Improve Spray Pressure
and Washout Effectiveness
Choose from a complete selection of AVantage® liquid photopolymer resins designed to meet the increasing demands of the packaging, molding and stamp industries for improved print quality and consistency. AVantage® liquid photopolymers help control costs and reduce environmental impact.
Packaged in 5-gallon plastic containers. Drums are also available.