AutoPIPE Quick Reference
2
Bentley AutoPIPE V8i - Quick Reference Guide Bentley AutoPIPE V8i - Quick Reference Guide T ools Import/Export Tools Model Options Tools > Model Options > Edit... or Result... • Export to AutoPIPE Nozzle Model Input Listing T ools > Model Input Listing or Ctrl+I Combinations Tools > Combinations or Ctrl+M • Export to StressISO (Load Cases, Code and Non-Code Combos) • Import AutoPIPE Mode Menu Commands File Menu Ctrl+O=Open Ctrl+P=Print Ctrl+S=Save Edit Menu Ctrl+Z=Undo Ctrl+Y=Redo Ctrl+X=Cut Ctrl+C=Copy Ctrl+V=Paste Ctrl+W=Grids Ctrl+G=Goto Point View Menu Ctrl+D=All Ctrl+F=Previous F3=Point Properties F8=Pan-Zoom-Rotate Ctrl+1=Single Line View Ctrl+2=Wire-Frame View Ctrl+3=Solid Model View View > Show Menu Ctrl+E=Reset Ctrl+T=OP Temp Ctrl+U=OP Press Ctrl+J=Pipe Prop Ctrl+N=Point Name Ctrl+Shift+L=Length Ctrl+Shit+H=Hydrodynamic Data Ctrl+Shit+M=Member Static EQ Factor Ctrl+Shift+W=Joint Type Ctrl+Shift+Q=Point Static EQ Factor Select Menu Ctrl+A=All Points Ctrl+Q=Clear F6=Range Analyze Menu Ctrl+H=Static Results Menu Ctrl+B=Output Report Load Combinations Components Xtra Data Convert • INSERT a Component/Xtra Data: Use the Insert menu or Left-Click on the icon in the Component toolbar. • MODIFY a Component /Xtr a Da ta: Use the Modify menu or Right-Click on the icon in the Component toolbar. • DELETE a Componen t/Xtra Data: U se the Delete menu or use Shif t-Right -Click on the icon in the Component toolbar. • CONVERT a Component: Use the Modify > Convert Point to menu or Left-Click on the icon. Loads Help Load > Static Analysis Sets Load > Dynamic Analysis Sets Help > Contents • Gravity • Wind • Modal • Harmonic or F1 • Thermal Expansion • Static Earth- quake • Response Spectrum • Time History • Force Spectrum Run Bend Tee Flange V alve Flexible Joint Joint Reducer Nozzle Segment Anchor Support Pipe Properties Rigid Options Pressure/ Temperature Soil Properties Distributed Load Beam/ Frame Joint Type & User SIF Additional Weight Imposed Support Displacement Point Static Earthquake Factor Weld Efficiency Factor Cut Short Concentrated Force Member Static Earthquake Factor Hydrodynamic Data Modify > Convert Point to > Run Modify > Convert Point to > Bend Modify > Convert Point to > T ee
-
Upload
uzairmetallurgist -
Category
Documents
-
view
48 -
download
7
description
kj
Transcript of AutoPIPE Quick Reference
7/14/2019 AutoPIPE Quick Reference
http://slidepdf.com/reader/full/autopipe-quick-reference-56327cb74cb10 1/1
entley AutoPIPE V8i - Quick Reference Guide
entley AutoPIPE V8i - Quick Reference Guideools Import/Export Tools
Model Options Tools > Model Options > Edit... or Result... • Export to AutoPIPE
NozzleModel Input Listing Tools > Model Input Listing or Ctrl+I
ombinations Tools > Combinations or Ctrl+M • Export to StressISOLoad Cases, Code and Non-Code Combos) • Import AutoPIPE Mode
Menu Commands
ile
Menu
Ctrl+O=Open Ctrl+P=Print Ctrl+S=Sav
dit
Menu
Ctrl+Z=Undo
Ctrl+Y=Redo
Ctrl+X=Cut
Ctrl+C=Copy
Ctrl+V=Paste
Ctrl+W=Grids
Ctrl+G=Go
View
Menu
Ctrl+D=All
Ctrl+F=Previous
F3=Point Properties
F8=Pan-Zoom-Rotate
Ctrl+1=Single Line View
Ctrl+2=Wire-Frame View
Ctrl+3=Solid Model View
View >
how
Menu
Ctrl+E=Reset
Ctrl+T=OP Temp
Ctrl+U=OP Press
Ctrl+J=Pipe Prop
Ctrl+N=Point Name
Ctrl+Shift+L=Length
Ctrl+Shit+H=Hydrodynamic Dat
Ctrl+Shit+M=Member Static EQ
Ctrl+Shift+W=Joint Type
Ctrl+Shift+Q=Point Static EQ Fa
elect
Menu
Ctrl+A=All Points
Ctrl+Q=Clear
F6=Range
nalyze
Menu
Ctrl+H=Static
esults
Menu
Ctrl+B=Output Report
LoadCombinations
omponents
tra Data
onvert
INSERT a Component/Xtra Data: Use the Insert menu or Left-Click on the icon in the Component toolbar.
MODIFY a Component/Xtra Data: Use the Modify menu or Right-Click on the icon in the Component toolbar.
DELETE a Component/Xtra Data: Use the Delete menu or use Shift-Right-Click on the icon in the Component toolbar
CONVERT a Component: Use the Modify > Convert Point to menu or Left-Click on the icon.
oads Help
oad > Static Analysis Sets Load > Dynamic Analysis Sets Help > Contents
Gravity • Wind • Modal • Harmonic or F1
Thermal
Expansion
• Static Earth-
quake
• Response
Spectrum
• Time History
• Force Spectrum
Run Bend Tee Flange ValveFlexib
JointJoint
Reducer Nozzle Segment Anchor SupportPipe
Prope
Rigid
Options
Pressure/
Temperature
Soil
Properties
Distributed
Load
Beam/
Frame
Joint Type &
User SIF
Additional
Weight
Imposed Support
Displacement
Point Static
Earthquake Factor
Weld Efficien
Factor
Cut ShortConcentrated
Force
Member Static
Earthquake Factor
Hydrodynamic
Data
Modify > Convert Point to > Run Modify > Convert Point to > Bend Modify > Convert Point to >
