AUTOMOTIVE - MARINE Keybox · Size mm 135,4 x 130,3 x 42,3 Low volt sense & lock down Optional...
Transcript of AUTOMOTIVE - MARINE Keybox · Size mm 135,4 x 130,3 x 42,3 Low volt sense & lock down Optional...
Icons shown on this keypad are for visual demonstration only.
3 Models Available- KB-12V-05A 13 relays (12 for CAN version) 12V 5A- KB-12V-10A 13 relays (12 for CAN version) 12V 10A- KB-24V-05A 13 relays (12 for CAN version) 24V 5A
Electrical Features - 13 switched circuits that include: - Momentary, toggle, and time-out functions - Circuits rated up to 10 ampere at 12V and 5 ampere at 24V maximum continuous load (resistive)- Isolated relay outputs- Fuse protected circuits- Input undervoltage lock down and overvoltage protection
BLINK MARINE
Power Management Enclosure
Environmental Features- Operating ambient temperature: -20°C to +70°C - Storage ambient temperature: -40°C to +85°C - Humidity: 0 to 98% (non-condensing)- IP67 enclosure
Special Features- CAN-bus compatible (CANopen)- Field programmability of electrical functions and current limit trip points available to authorized OEMs and Value-Added Resellers (VARs)
M A R I N E
Compact and versatile, Keybox is a smart relay module for electric loads that make it possible to utilize Blink Marine keypads where there are no PLC systems onboard. Thanks to its CAN bus interface and high power outputs, Keybox can also be used in “slave” mode with complex systems.
AUTOMOTIVE - MARINE
Keybox
KEYBOX
KEYPADPOWERKEYPOWERKEY PRO
SPECIFICATIONS FOR KEYBOX POWER MANAGEMENT ENCLOSURE
ELECTRICAL KEYBOX Supply voltage 12V Nominal 9-16V or 24V Nominal 18-31VStandby current <30mA per PMELoad current Max 5 A per output (resistive) @ 24V Max 10 A per output (resistive) @ 12VCommunication bus RS-485 between keypad and PME CAN Bus Slave Circuit protection Automotive mini blade fuse
MECHANICAL Connector Cinch 581-01-18-038/581-01-30-064Mating connector Cinch 581-01-18-023/581-01-30-029 with 4250000873Housing / cover 33% Glass Filled PolymerPC board 1,6mm thick, Nema Grade FR-4, Double clad with 2oz copper ENVIRONMENTAL Operating temperature -20ºC to +70ºC Storage temperature -40ºC to +85ºC Humidity 0 to 98% (no condensation) Salt spray 96HrsIngress Protection Rating IP67
FEATURES Circuits 13Size mm 135,4 x 130,3 x 42,3 Low volt sense & lock down Optional Analog sense N/ASense pins levels N/ATachometer sense pins N/ADimming/PWM Features N/ACircuit status monitoring N/AField re-programmable OptionalExternal status communication Optionalon the bus
130.30 mm
101.60 mm
20.6
0 m
m
42.3
0 m
m39
.00
mm
135.
40 m
m
Ø 7
,42
mm
Blink S.r.l.Via Montefeltro, 6 - 20156 Milano - ItalyTel. +39 02 3088583 - Fax +39 02 33406697www.blinkmarine.com - [email protected]
!WARNING! IMPROPER SELECTION, IMPROPER USE AND/OR FAILURE OF THE BLINK SYSTEMS PRODUCTS DESCRIBED HEREIN OR RELATED ITEMS CAN CAUSE DEATH, PERSONAL INJURY AND PROPERTY DAMAGE. This document and other information from Blink, provide product and/or system options for further investigation by users having technical expertise. It is important to analyze all aspects of the application, including consequences of any failure. Due to the variety of operating conditions and applications for these product(s), the manufacturer of the application is solely responsible for marking the final selection of the product(s) and assuring that all performance, safety and warning requirements of the application are met. The products described herein, including without limitation, product features, specifications, designs, availability and pricing, are subjrct to change by Blink at any time without notice.
KEYBOX
KEYPADPOWERKEYPOWERKEY PRO
AUTOMOTIVE
MARINE
SOFTWARE FEATURESCAN and RS485 Keypad Addresses – Assign any valid CAN
(J1939) address to the keypad while also assigning the same or a
different RS485 address. Communicate on either BUS simultane-
ously.
CANopen Communications Protocol – Fully compliant with Device
Profile 401d.
J1939 Address Claim Transmission – Keypads no longer have to
be pre-programmed to a specific address. This enables customers
that work in applications in the field without access to a GUI to use
any replacement keypad on-hand. The keypad can be configured to
automatically announce its address and accept a new address
assignment as appropriate.
Event Status Transmission – The keypad can send messages to
the BUS indicating a button press or a button release event has
occurred. This confirmation allows digital systems to have the
same input acknowledgements as that of the latching position of a
mechanical switch.
Periodic Status Transmission – The keypad sends a continuous
broadcast of messages indicating the press or release status of
each button at that instance. The frequency of these messages but
can be adjusted in a wide range.
Periodic Heartbeat – The keypad sends a continuous broadcast of
messages indicating it is functioning correctly. The frequency of
these messages but can be adjusted in a wide range.
Blink PowerKey 1000 CAN keypad combines the styling and compact package size of the PowerKey family with the software features
and network capabilities of Blink popular PowerKey Pro family. The PowerKey 1000 CAN keypad is the perfect lightweight and flexible
solution for any application.
POWERKEY 1000 CAN
FLEXIBLE - SMART - RUGGED
Icons shown on this keypad are for visual demonstration only.
AUTOMOTIVE - MARINE
HARDWARE FEATURESIP67/NEMA6 rating – Guaranteed to be dust tight and sealed
against water immersion to a depth of 1 meter for up to 1 hour.
UV Protected – UVB 400 hours: Keypad is highly resistant to
deterioration caused by exposure to sunlight.
THREE MODELS
10 Keys
YOUR LOGO
8 Keys
YOUR LOGO
6 Keys
CANopen
STANDARD FEATURES• Custom laser etched icons
• Multiple LED status indicators
per function
• Low profile
• Compact
• Vertical or horizontal mount
• Overlay
• Laser Etch• Pad Print• Flush-mount or front-mount
• LED backlit icons
• ON/OFF, momentary,
toggle & scroll
SPECIFICATIONS FOR STANDARD KEYPADS
Blink S.r.l.Via Montefeltro, 6 - 20156 Milano - ItalyTel. +39 02 3088583 - Fax +39 02 33406697www.blinkmarine.com - [email protected]
SOFTWARE FEATURES• Change CAN keypad addresses
independently
• Periodic Status transmission
• Heartbeat
• Event status transmission
• LED acknowledgement
• Address claim transmission
• CANopen, J1939
OTHER BENEFITS• Programmer’s manual available to help support
plug-and-play reconfigurability
• Available in fixed legends
ELECTRICALSupply Voltage 12-24Vdc Nominal (8-32VDC)
Standby Current <50 mA
Communication BUS CANopen, J1939
MECHANICALConnector Deutsch DT04-4P, Molex 19418-0004,
Micro-C and more Switch Life 3 million operations
Mechanical Shock X, Y, Z 50Gs 11ms
Vibration X, Y, Z 10 - 150Hz 0.15mm amp
Mounting Studs #10-32 CDA-510 phosphor bronze,
electroplated bright tin
Keypad Silicone rubber with polyurethane hardcoat
PC Board 1,6mm thick, Nema Grade FR-4, double
clad with 1oz copper
Operating Temperature -40°C to +85°C
Storage Temperature -40°C to +85°C
Thermal Shock -40°C to +72°C @ 4°C/Min
Humidity 0 to 98% (no condensation)
UV Protection UVB 400 hours
Salt Spray Per ASTMB117
Chemical Resistance Deet, Engine Cleaner, Isopropyl Alcohol,
Suntan Lotion, Multi-Purpose Cleaner,
Orange Citrus Cleaner
Ingress Protection Rating IP67/NEMA6
# 10 - 32 UNC THREAD, 2 PLACES
!WARNING! IMPROPER SELECTION, IMPROPER USE AND/OR FAILURE OF THE BLINK SYSTEMS PRODUCTS
DESCRIBED HEREIN OR RELATED ITEMS CAN CAUSE DEATH, PERSONAL INJURY AND PROPERTY DAMAGE.
This document and other information from Blink, provide product and/or system options for further
investigation by users having technical expertise. It is important to analyze all aspects of the application,
including consequences of any failure. Due to the variety of operating conditions and applications for these
product(s), the manufacturer of the application is solely responsible for marking the final selection of the
product(s) and assuring that all performance, safety and warning requirements of the application are met. The
products described herein, including without limitation, product features, specifications, designs, availability
and pricing, are subjrct to change by Blink at any time without notice.
127.00 mm5’’
84.20 mm3.31’’0.84’’
21.40 mm
63.5
0 m
m2.
50’’
1.25
’’6.
10’’
155.
00 m
m14
.90
mm
0.58
’’
31.8
0 m
m
17.50 mm0.68’’
SOFTWARE FEATURES
CAN and RS485 Keypad Addresses – Assign any valid CAN
(J1939) address to the keypad while also assigning the same or a
different RS485 address. Communicate on either BUS simultane-
ously.
J1939 Address Claim Transmission – Keypads no longer have to
be pre-programmed to a specific address. The keypad can be
configured to automatically announce its address and accept a
new address assignment as appropriate.
Event Status Transmission – The keypad can send messages to
the BUS indicating a button press or a button release event has
occurred. This confirmation allows digital systems to have the
same input acknowledgements as that of the latching position of a
mechanical switch.
Periodic Status Transmission – The keypad sends a continuous
broadcast of messages indicating the press or release status of
each button at that instance. The frequency of these messages but
can be adjusted in a wide range.
Periodic Heartbeat – The keypad sends a continuous broadcast of
messages indicating it is functioning correctly. The frequency of
these messages but can be adjusted in a wide range.
PowerKey1400 is the flagship model for Blink Marine’s IP67 keypads. It boasts 14 keys and is available with CANopen, J1939 and
RS485 protocols. Compact and elegant, the rubber element of the PowerKey 1400 can be personalized for both the icons and the
numbers of led assigned to each individual key. The keypad is also clearly visible in the dark thanks to its LED RGB backlights.
POWERKEY 1400 CAN
FLEXIBLE - SMART - RUGGED
HARDWARE FEATURES
IP67/NEMA6 rating – Guaranteed to be dust tight and sealed
against water immersion to a depth of 1 meter for up to 30 min.
UV Protected – UVB 400 hours: keypad is highly resistant to
deterioration caused by exposure to sunlight.
THREE MODELS
Icons shown on this keypad are for visual demonstration only.
14 Keys
YOUR LOGO
12 Keys
YOUR LOGO
10 Keys
CANopen
AUTOMOTIVE - MARINE
17.9
0 m
m0.
70’’
STANDARD FEATURES
• Custom laser etched icons
• Multiple LED status indicators
per function
• Multicolor indicator LED
• Low profile
• Compact
• Vertical or horizontal mount
• Overlay• Laser Etch• Pad Print• Flush-mount or front-mount
• LED backlit icons
• ON/OFF, momentary,
toggle & scroll
SPECIFICATIONS FOR STANDARD
KEYPADS
SOFTWARE FEATURES
• Change CAN keypad addresses
independently
• Periodic Status transmission
• Heartbeat
• Event status transmission
• LED acknowledgement
• Address claim transmission
• RS485, CANopen, J1939
OTHER BENEFITS
• Programmer’s manual available to help support
plug-and-play reconfigurability
• Available in fixed legends
ELECTRICAL
Supply Voltage 12-24Vdc Nominal (8-32VDC)
Standby Current <50 mA
Communication BUS RS485, CANopen, J1939
MECHANICAL
Connector Deutsch DT04-4P
Switch Life 3 million operations
Mechanical Shock X, Y, Z 50Gs 11ms
Vibration X, Y, Z 10 - 150Hz 0.15mm amp
Mounting Studs #10-32 CDA-510 phosphor bronze,
electroplated bright tin
Keypad Silicone rubber with polyurethane hardcoat
PC Board 1,6mm thick, Nema Grade FR-4, double
clad with 1oz copper
Operating Temperature -40°C to +85°C
Storage Temperature -40°C to +85°C
Thermal Shock -40°C to +85°C @ 2°C/Min
Humidity 0 to 98% (no condensation)
UV Protection UVB 400 hours
Salt Spray Per ASTMB117
Chemical Resistance Deet, Engine Cleaner, Isopropyl Alcohol,
Suntan Lotion, Multi-Purpose Cleaner,
Orange Citrus Cleaner
Ingress Protection Rating IP67/NEMA6
170.00 mm6.69’’
124.50 mm22.70 mm4,90’’0.89’’
63.5
0 m
m2.
50’’
1.25
’’6.
10’’
155.
00 m
m
(X2)
16.3
0 m
m
31.8
0 m
m
Blink S.r.l.Via Montefeltro, 6 - 20156 Milano - ItalyTel. +39 02 3088583 - Fax +39 02 33406697www.blinkmarine.com - [email protected]
!WARNING! IMPROPER SELECTION, IMPROPER USE AND/OR FAILURE OF THE BLINK SYSTEMS PRODUCTS
DESCRIBED HEREIN OR RELATED ITEMS CAN CAUSE DEATH, PERSONAL INJURY AND PROPERTY DAMAGE.
This document and other information from Blink, provide product and/or system options for further
investigation by users having technical expertise. It is important to analyze all aspects of the application,
including consequences of any failure. Due to the variety of operating conditions and applications for these
product(s), the manufacturer of the application is solely responsible for marking the final selection of the
product(s) and assuring that all performance, safety and warning requirements of the application are met. The
products described herein, including without limitation, product features, specifications, designs, availability
and pricing, are subjrct to change by Blink at any time without notice.
#10 - 32 STUDS
NOTE: ALL CONNECTION WIRES ARE THE SAME LENGTH
≈