Automotive Industry - Amazon Web Services...and automation solutions. Horizontal Machining Centres...
Transcript of Automotive Industry - Amazon Web Services...and automation solutions. Horizontal Machining Centres...
www.moriseiki.eu
Automotive IndustryPURE TECHNOLOGY – System partner
Shaft machining on the NZ Series
Successful products and strategies will always
be copied quickly. Business systems are
becoming more and more exchangeable. But
the one thing that cannot be replicated, and
at the same time always ensures new products
and services, is the innovation performance
Automotive Industry 2 | 3
Compact and competitive: innovative production technique direct from system partner – MORI SEIKI.
of a company. Due to this we have over 450
development engineers and considerably
invest in research and development each year.
MORI SEIKI – stands for innovation and
system partner in the automotive industry.
| 1 Engine block complete machining | 2 High performance racing engine | 3 Volkswagen decided von NZ-S Series
3
1
2
Component spectrumMade to measure solutions for your production.
3
1
4
5
2
Cars of the future have outstanding abilities. Intelligent “turn-key” production solutions from MORI SEIKI.
Automotive Industry 4 | 5
| 1 Chassis | 2 Water pump housing | 3 Oil circuit housing | 4 V8 engine block | 5 gear box casing
MORI SEIKI is able to look back over decades on its co-operation with the automotive industry. A collaboration of experience and innovation has made them specialists in the
industry. From stand alone solutions to auto-mated production lines.
Systems PartnerKnow-how, worldwide quality standards and a reliable network of technical engineers.
Service and Maintenance
Management support
MORI SEIKI supports and offers advice in various areas, for example investment planning or relocation in production.
Optimal support in service, operation, maintenance and spare parts supply guarantee the best in reliability.
Automotive Systempartner – know-how, worldwide quality standards and a reliable network of technical engineers.
Automotive Industry 6 | 7
MORI SEIKI not only offers automotive
pro duction techniques from a range of more
than 200 machine tools, but also a world wide
network of professionals that can offer you
advice from tool selection and programming
to installation and maintenance.
Our engineering team continuously works
on offering tailor made complete solutions.
MORI SEIKI offers you a problem free
production start.
Technical support
Production support
Service and Maintenance
Management support
We offer you solutions for your production. From programming, fixtures and tool selection to test cutting
and installation up to complete turn key projects.
Process solutions are constantly being optimised. Our application technicians are always available
for all questions and problems in production.
CUSTOMER
Facts NMV Series: | DCG® technology and excellent Box-in-Box construction
with zero overhang| High-rigidity table with DDM® (Direct Drive Motors)
at the B- and C-axes| B-axis-indexing range 340° and full C-axis rotary table – up to 1,200 min-1*| Revolutionary Octagonal Ram Construction (ORC™)
supports precision and high rigidity at the Z-axis| MAPPS III: simple conversational functions,
3D interference checking function*optional NMV5000 DCG
NMV Series - 5-axis machining with direct drive rotary axes.
5-Axis Machining Centres
Technical details NMV5000 DCG NMV8000 DCG/40 NMV8000 DCG/50Travel X-/Y-/Z-axis mm 730/510/510 1.200/920/610Travel C-/B-axis max. 360°/340° 360°/340°Table size mm ø500 ø800Max. workpiece size mm ø700x450 ø1,000x500Max. workpiece weight kg 300 1,000Spindle speed min-1 12,000 [20,000] 12,000 [20,000] 10,000 [15,000]Rapid traverse rate m/min X, Y: 50, Z: 40 X, Y, Z: 40
min-1 C: 120 [500, 1,200], B: 35 [50] C: 100 [300], B: 25[ ] optional
Products/ApplicationThe right product for your production.
DCG® Driven in the Centre of Gravity
Minimising vibrations and maximising acceleration. DCG-technology minimises vibration and allows for maximum acceleration force right from the start.
DDM® Direct Drive Motor
Achieves zero backlash by transmitting the power directly without using gears, the DDM achieves more efficient drive than ever before.
<Integrated direct drives with highest accuracy and rapid traverse rate up to 120 min-1, optional 1.200 min-1 (C-axis NMV5000 DCG)
>NMV Series – the ultimate 5-axis machining centres with DCG® technology and direct drive rotary axes
Automotive Industrie 8 | 9Technologies
BMT® Built-in Motor Turret
By placing the motor inside the turret, the BMT reduces temperatures and minimises vibration. This increases the transmission efficiency, machining accuracy and milling power.
ORC™ Octagonal Ram Construction
Slideways are placed diagonally opposite each other; this symmetrically distorts heat and offsets each other’s thermal deforma-tion. Allowing high-precision machining with high-speed travel.
B-Axis
C-Axis
Facts NH Series: | Choose from 4 pallet sizes to meet all
customers needs| DCG® technology and Box-in-Box construction | Wide variety of automation solutions with
MORI SEIKI pallets and robot systems| NEW: NH6300 DCG + NH8000 DCG as Edition II,
with increased travel, more loading capacity and extreme acce leration abilities – at smaller floor space
| MAPPS III: simple conversational programming
NH Series – with remarkable technique and automation solutions.
Horizontal Machining Centres
Technical Details NH4000 DCG NH5000 DCG NH6300 DCG II NH8000 DCG IIAxis travel X-/Y-/Z- mm 560/560/630 730/730/850 1,050/900/980 1,400/1,200/1,350Pallet working surface mm 400x400 500x500 630x630 800x800Max. workpiece weight kg 400 500 [700] 1,500 2,200Max. Spindle speed min-1 14,000 [20,000] 14,000 [20,000] 10,000 [8,000] [15,000] 10,000 [8,000] [15,000]Rapid traverse rate X/Y/Z m/min 50 50 50 50No. of tools capacity 40 [-240] 40 [-240] 60 [-330] 60 [-330]Spindle drive motor kW 22/18.5 22/18.5 30/25 30/25[ ] optional NEW GENERATION
Products/ApplicationThe right product for your production.
Automotive Industry 10 | 11
| 1 Mass production on the NH5000DCG | 2 High-precision cast machining (pic.: MORI SEIKI) | 3 Multiple setting cylinder head
CMG Cofeva S.p.A.MORI SEIKI Partner for more than 12 years
Specialists in prototypes and details for the automotive industry, CMG Cofeva S.p.A. has been working for over 30 years in the auto-motive compartment. Today, CMG Cofeva numbers among its cus tomers big names such as Iveco S.p.A., Iveco Aifo, Comau, Ford U.K., Renault, Centro Ricerche Fiat, the whole Fiat Powertrain Technologies S.p.A. Group and the recently acquired Gaz Group.For supply of their equipment CMG Cofeva has chosen the well-known MORI SEIKI Group, who since 1996 has granted them the best
advice for the configuration of the machining centres most suitable for their needs. Besides the several SH Series and one MH Series horizontal centres, in recent years CMG Cofeva has chosen various MORI SEIKI NH Series models. The horizontal machining centres NH8000DCG, NH5000DCG and NH6300DCG, provided with a box-in-box construction, and high table rigi dity are especially indicated for the automotive, aerospace and dies and moulds industries.
Courtesy of: J Publishing&Media Srl Unipersonale - Source: M&A April 2008
Products/ApplicationWeber Automotive – Always one step ahead
Weber Automotive - always one step ahead
Whoever wants to be active in the automobile
industry has to be flexible in daily business.
This applies also for the advances in their own
production. Due to a large order contract in
engine blocks and cylinder heads, Weber
Automotive has set up a new production system
with MORI SEIKI horizontal machining centres.
At the beginning of 2007 the large order came
through, which meant a new production sys-
tem had to be set up. A choice of eight compa-
nies where on the short list. In the end Weber
decided for MORI SEIKI. Important factors in
the end decision were the performance abili-
ties of the NH8000 DCG machines. Christian
Weber explains:
“We were impressed by the driven at the centre
of gravity abilities with twin drive system on
all linear axes and the Box-in-Box construction.
This allows for extremely stable set-up, with
minimum vibration and high-speed dynamics.”
A further strong argument for the NH8000DCG
is the high-speed table with direct drives.
FACTS:
Weber Automotive GmbH
Founded: 1969Employees: >500
www.weber-automotive.com
Automotive Industry 12 | 13
Christian Weber comments further “with such
an important project, technical details are just
one element in the decision process. Just as
important is the confidence in the appointed
company and in the responsible contact per-
son from that company. With close discussions
and a visit to the factory, trust developed, and
in the end we were sure that we had found the
right partner.”
The collaboration with MORI SEIKI was so
convincing that Weber decided to bring other
types of MORI SEIKI machines into the com-
pany, for the pre-machining of crankshafts for
example. The MORI SEIKI NT4250 DCG, that
combines turning and milling in one machine,
is an ideal solution, Christian Weber explains
“till now the milling abilities were not powerful
enough. The NT with its complete milling
spindle can set benchmarks”. The company’s
training area has also been equipped with a
MORI SEIKI machine.
| 1 High-precision engine block production | 2 measuring of crankshaft | 3 Precision made by Weber and MORI SEIKI| 4 the project team
NMH Series - 5-axis machining of workpieces up to 1,500 mm diameter and 2,500 kg.
Horizontal Machining Centres
Facts NMH Series:| 5-axis machining for large workpieces up to 2,500 kg| 3 direct drives (DDM®) in the table unit
for extreme accuracy and precision| Box-in-Box construction with DCG® technology| Large rotation range of the A-axis (+30/-120°)| Automatic pallet changer as standard integrated in
a compact construction of 3,400 mm width (without tool magazine)
Technical Details NMH6300 DCG NMH10000 DCGAxis travel X-/Y-/Z- mm 1,400/1,200/1,200 1,550/1,600/1,300
Pallet working surface mm 630x630 1,000x1,000
Max. workpiece weight kg 800 2,500
Max. spindle speed min-1 10,000 [8,000, 15,000] 10,000 [8,000, 15,000]
Rapid traverse rate X/Y/Z m/min 50 42/42/36
No. of tools capacity 60 [140, 180, 240, 330] 60 [140, 180, 240, 330][ ] optional
Products/ApplicationThe right product for your production.
Automotive Industry 14 | 15
<Simultaneous 5-axis machining in one set-up. Significantly shortens machining times as well as increases precision.
>The NMH Series is available with various pallet systems and robot solutions.
NZ-S Series – Shaft machining up to 1,055 mm.
Automotive Solutions
Facts NZ-S Series:| Shaft machining up to 1,055 mm| Small surface space due to compact design| Extensive automation solutions| Specially designed for the automobile
industry and its suppliers| Optimal chip disposal| Linear guides in all axes| NC-controlled tailstock and
steady rest
Technical Details NZ-S1500/500 NZ-S1500/1000Max. machining diameter mm 120 120Max. machining length mm 535 1,055 Max. bar diameter mm 33 [51] 33 [51]Axis travel X-/Z- mm 60/580 60/1,100 Max. spindle speed min-1 3,500 3,500 Feedrate X/Z m/min 20/30 20/36[ ] optional
Products/ApplicationThe right product for your production.
Volkswagen decided on NZ-S Series.
Automotive Industry 16 | 17
Volkswagen and MORI SEIKI – at the Polish site
in Polkowice, where over 600.000 VW diesel
motors from the newest Common-Rail
Generation are produced per year, along with
components such as cams or crankshafts, has
undergone modern technology investment.
With the NZ-S1500 Volkswagen has changed
over to a new manufacturing cell that allows
maximum flexibility in parts loading. From
September 2007 the first machine has been in
operation, and since then a second has been
installed and accepted and in the coming year
another two will be installed.
Crankshafts as well as intake and exhaust
cams will be produced on these new CNC
lathes that are 100% cut-out for shaft machin-
ing and mass production. The compact con-
struction of the NZ-S1500 not only improves
visibility in the factory but also the produc-
tivity per unit area. Once again Volkswagen
has benefited from MORI SEIKI technology
which allows for high quality and return on
investment.
| 1 camshaft machining – NZ-S Series | 2 NZ-S handling system with a rotary hand function (pictures: MORI SEIKI)
VW Motor Polska 59109 PolkowicePoland
NL Series – the bestseller that meets all demands of modern high performance machining.
CNC Universal Lathes
Facts NL Series:| Turret with built-in milling motor with up to 4 times
machining performance in comparison to other turrets| Up to 20 stations for power driven tools available
(NL1500/NL2000)| Available with a Y-axis (100 mm), sub spindle, interface
for bar feeding rate | Up to 3,000 mm turning length (NL3000)| Digital tailstock
Technical Details NL1500 NL2000 NL2500 NL3000Turning length mm 515 510 705 [1,298] 713 [1,260, 2,123, 3,123]Max. turning diameter mm 356 [278*] 356 356 420Max. bar work capacity mm 52 65 80 90Max. spindle speed min-1 6,000 [8,000] 5,000 4,000 3,000Number of tool stations 12 [16] [20] 12 [10] [16] [20] 12 [10] 10 [12]Travel X-/Y-/Z-axis mm 260/100 (±50)/590 260/100 (±50)/590 260/100 (±50)/1,345 280/120 (±60)/820[ ] optional *Turret with 20 stations
Products/ApplicationThe right product for your production.
Automotive Industry 18 | 19
<integrated loading and unloading system for serial production (optional)
> built-in motor turret for 20 tools (NL1500/NL2000)
NT Series Facts: | Complete machining with a maximum of 2 spindles and 2 turrets for up to 9 controlled axes| DCG® Technology at the X- and Z-axis | Sturdy column with Box-in-Box construction and octagonal ram (ORCTM) at the Y-axis for extreme rigidity| B-axis with DDM® (Direct Drive Motor) with a rotation range of +/- 120°| NEW: long boring bar specification up to 1,270 mm (optional with the NT6600)| MAPPS III with 3D interference checking function
Integrated Mill Turn Centres
NT Series – no compromise integration of milling and turning machining.
Technical Details NT3100 DCG NT3150 DCG NT3200 DCG NT4200 DCG NT4250 DCG NT4300 DCG NT5400 DCG NEW NT6600 DCGMax. bar diameter mm 40 52 65 65 80 90 103 B: 164/C**Max. machining length mm 1,022 1,022 1,022 1,596 1,562 1,518 1,921 6,076Max. machining diameter mm 600 600 600 660 660 660 920 1,070Max. spindle speed min-1 6,000 (8,000)* 6,000* 5,000* 5,000* 4,000* 3,000* 2,400* Option B: 1,500/C: 1,000Max. tool spindle speed min-1 12,000 12,000 12,000 12,000 12,000 12,000 8,000 8,000Axis travel X-/Y- mm 685/±125 685/±125 685/±125 750/±210 750/±210 750/±210 1,040/±255 1,040/±330MAPPS III High-Speed-Programming *applies also for sub spindle, depending on design** For the specification of C-type, please contact MORI SEIKI.
Products/ApplicationThe right product for your production.
Sandvik Coromant Application Center Automotive
Cooperation in the development of machining know-how for innovative components and materials in the automobile.
Automotive Industry 20 | 21
Sandvik Coromant not only supports its
partners in the automotive segment with ma-
chining expertise and modern cutting tools
but also with future orientated concepts that
open up the potential to increase production
output. These innovative solutions are devel-
oped for varying industry branches worldwide
in their so called Application Centres. At the
Technical Details NT3100 DCG NT3150 DCG NT3200 DCG NT4200 DCG NT4250 DCG NT4300 DCG NT5400 DCG NEW NT6600 DCGMax. bar diameter mm 40 52 65 65 80 90 103 B: 164/C**Max. machining length mm 1,022 1,022 1,022 1,596 1,562 1,518 1,921 6,076Max. machining diameter mm 600 600 600 660 660 660 920 1,070Max. spindle speed min-1 6,000 (8,000)* 6,000* 5,000* 5,000* 4,000* 3,000* 2,400* Option B: 1,500/C: 1,000Max. tool spindle speed min-1 12,000 12,000 12,000 12,000 12,000 12,000 8,000 8,000Axis travel X-/Y- mm 685/±125 685/±125 685/±125 750/±210 750/±210 750/±210 1,040/±255 1,040/±330MAPPS III High-Speed-Programming *applies also for sub spindle, depending on design** For the specification of C-type, please contact MORI SEIKI.
Automotive Application Centre in Bietigheim,
near Stuttgart, the engineers at Sandvik
Coromant rely on the partnership with MORI
SEIKI especially for complex components and
geometries – and together they can ensure
the success of their customers.
Test cut on the NT SeriesAutomotive Application Centre in Bietigheim
NZ Series Facts: | Up to 3 built-in motor turrets (BMT®) for max. 48 direct driven tool stations | Simultaneous machining with max. 3 turrets and 3 programmes| Excellent milling performance – up to 3 Y-axes with the longest strokes in its class (110 mm)| MAPPS III: simple conversational programming with 3D interference checking function
NZ Series – complete machining with up to 3 turrets each with Y-axis.
CNC Multi-Axis Turning Centres
Technical Details NZ1500T3Y3 NZ2000T3Y3
Max. machining diameter mm 320 320 Max. turning length mm 810* 810*Max. bar diameter mm 52 65 Axis travel X-/Z-/Y-/B- (spindle 2) mm 210/300, 810/110/920 210/300, 810/110/920 Max. spindle speed min-1 6,000 5,000 Max. rotation of the driven tools min-1 6,000 [12,000] 6,000 [12,000] [ ] optional *Max. length workpiece which can be machined using O.D. tool on turret 2 (with the workpiece supported at both ends)
Products/ApplicationThe right product for your production.
Automotive Industry 22 | 23
Clamping tools from Tobler have supported the
automotive industry for many years with the
development of innovative clamping concepts.
Individual, low-cost solutions are perhaps more
in demand in the automotive industry than in
any other industry. With the right system part-
ner, the perfect solutions can be developed
and put into operation. You can rely on the
highest precision and know-how from the
market leader.
For more information go to:
www.tobler.moriseiki.co.uk
Individual solutions for all your needs – Tobler clamping technique
Tobler – Innovative clamping solutions for the automobile industry in the MORI SEIKI Group.
MORI SEIKI and Mercedes-Benz HighPerformance-Engines benefit from a technical partnership.
For the FIA Formula One World Championship
season, Mercedes-Benz HighPerformance-
Engines, Brixworth, Northants designs and
manufactures F1 engines for Vodafone
McLaren Mercedes.
MORI SEIKI’s relationship with Mercedes-Benz
HPE goes back to its early days. Shortly after
the company (then known as Ilmor Engineer-
ing) was formed in 1984, two out of the first
five machines purchased were MORI SEIKI, and
were destined for the manufacture of cylinder
heads, connecting rods and engine blocks.
Now Mercedes-Benz HPE has 30 MORI SEIKI
machines and employs over 400 people. The
company originally chose MORI SEIKI based
on its reputation for reliability and accuracy.
The first MORI SEIKI bought, a ZL25, is still
machining crankshafts on its original spindle.
A MV40 machine purchased in 1989 worked
reliably until recently, and is now waiting to be
re-installed for the manufacture of jigs and
fixtures. Adam Labudek said, “We carry out
regular inspections, and these machines are
within their original specification even after
Products/ApplicationThe right product for your production.
| 1 Simple conversational programming with MAPPS III | 2 Formula 1 racing engine | 3 5-axis complete machining engine block (pic.: MORI SEIKI)
Automotive Industry 24 | 25
18 years of use. A number of our machines run
24/7 so the high standards of service and
support we get from MORI SEIKI are essential.”
Mercedes-Benz HPE and MORI SEIKI have
established a technical partnership in which
the two companies work closely together
to develop new machine designs to match the
exacting demands of motorsport. Adam
Labudek explained, “We have collaborated on
a number of machine designs, including the
NH8000 5-axis horizontal machining centre.
MORI SEIKI engineers presented us with an
initial scheme and invited us to comment. For
this machine we were concerned about the
speed of the tipping axis compared with the
speed of the other axes, which were extremely
fast. The new design incorporates linear
motors on this axis which allows all the 5-axis
movements to operate at full speed.
Both MORI SEIKI and Mercedes-Benz HPE
benefit from the relationship by sharing tech-
nological expertise and practical experience in
the most demanding machining environment.
Mercedes-Benz HighPerformanceEngines Ltd
Established: 1984Machines: 33 MORI SEIKI machines from horizontal machining centres to integrated mill turn centres
FACTS:
from left: | 1 Linear Pallet Pool system for large-variety production | 2 combination of lathes and machining centres for automated complete machining | 3 Carrier Pallet Pool systems with various configurations available
AutomationThe right solution for all purposes.
Automotive Industry 26 | 27
Achieving competent automation solutions to meet customer demands has been the task for MORI SEIKI for years. With an engineering team, that has a world-wide network of ex-perience and know-how in diverse industries.
Automation Free-Style – Engineering competence combined with a wide range of automation solutions.
There are complete configured solutions (CPP, RPP) as well as totally individual designed systems (LPP) available. MORI SEIKI is with you from the planning, installation and implementation to the integration of your network.
LPP CPP RPP
Scale
Number of machines Up to 8 units Up to 2 units 1 unit
Number of workpiecesetup stations Up to 5 sets Up to 2 sets Up to 8 sets
Number of pallet stations Up to 99 stations Up to 29 stations Up to 14 stations
Number of pallet shelves 2 levels 1 level 2 levels
Choose to suit your needs:
ContactAlways near by.
MORI SEIKI Technical Centres and Sales and Service partners
GERMANY Hamburg Technical CenterMerkurring 63 - 65, 22143 HamburgTel. +49 (0)40 69 458 0Fax +49 (0)40 69 458 200
Düsseldorf Technical CenterSiemensring 19, 47877 WillichTel. +49 (0)21 54 88 59 0Fax +49 (0)21 54 88 59 210
Stuttgart Hauptverwaltung & Technical CenterAntoniusstraße 14, 73249 WernauTel. +49 (0)7153 934 0 Fax +49 (0)7153 934 200
Frankfurt Technical CenterBorsigstraße 20, 65205 WiesbadenTel. + 49 (0)6122 92 777 0Fax + 49 (0)6122 92 777 10
München Technical CenterBremer Straße 11, 80807 MünchenTel. +49 (0)89 35 744 0 Fax +49 (0)89 35 744 200
NEW from end 2008: Chemnitz Technical CenterAuer Straße 48, 09366 Stollberg
FRANCEMORI SEIKI FRANCE S.A.S Parc du Moulin, 1, Rue du Noyer BP 19326 Roissy en France, 95705 Roissy CDG Cedex Tel. +33 (0) 1 39 94 68 00
Agence régionale de Toulouse 6, Impasse Lèonce Couture, 31200 ToulouseTel. +33 (0) 5 3425 29 95
MORI SEIKI Sud-Est Chassieu 81, Avenue du Progrès, 69680 ChassieuTel. +33 (0) 4 78 90 95 95
MORI SEIKI Sud-Est agence de Vougy 40, Rue du Stade, 74130 VougyTel. +33 (0) 4 50 18 03 43
REPMO377, Avenue du Président-Wilson 93214 Saint-Denis Tel. +33 (0)1 49 46 61 45
SCOMOParc d‘activités St-Martin-du-Touch 4, Rue Marius Tercé, 31300 ToulouseTel. +33 (0)5 61 78 85 85
SEVMORue Eiffel-CP 4007, 44806 Saint-HerblainTel. +33 (0)2 40 92 09 09
ITALYMORI SEIKI ITALIANA S.R.LMilanoVia Riccardo Lombardi N. 10, 20153 MilanoTel. +39 02 48 94 921
Benedetto Rutigliano S.r.l.S.S. 96 – KM 115+750 70026 Modugno (BA)Tel. +39 080 5356 802
Essedi S.p.A.Via dell‘ Artigianato, 1, 25080 Molinetto di Mazzano (BS)Tel. +39 030 2120 453
FM Macchine S.r.l.Via Tamigi, snc - 65016 Montesilvano (PE)Tel. +39 085 4683 818
H.T.M. S.r.l.Via di Le Prata, 146, 50041 Calenzano (FI) Tel. +39 055 882 6660
Micron S.p.A.Via Enrico Fermi, 7, 35030 Veggiano (PD)Tel. +39 049 900 6611
Moreno Macchine Utensili S.r.l.Via Grecia, 10 - 41100 Modena (MO)Tel. +39 059 418 611
Prisma Macchine Utensili S.p.A.Via Presolana, 9 20021 Baranzate di Bollate (MI)Tel. +39 02 356 4025
Sirtech S.p.A.Via Casilina Km. 131, 600 03030 Piedimonte San Germano (FR)Tel. +39 0776 4020 27
Tecno Control S.r.l.Strada per Carrone, 30 10019 Strambino (TO)Tel. +39 0125 637581
Tecnologia ed Automazione Industriale S.r.l.Via Ghisalba, 13 - 20021 Bollate (MI)Tel. +39 02 3830 6184
UKMORI SEIKI (UK) LTD.London202 Bedford Avenue, Slough SL1 4RYTel. +44 (0) 870 240 9500
MORI SEIKI Birmingham4060 Lakeside, Solihull Parkway, Birmingham Business Park BIRMINGHAM B37 7YNTel. +44 (0) 870 240 9500
Automotive Industry 28 | 29
Europe-wide reliability. MORI SEIKI support with an overall network throughout Europe. Contact your regional partner.
SPAINMORI SEIKI ESPAÑA S.A.BarcelonaCalle de la Electronica, Bloque B, Nave 9 Poligono Industrial „La Ferreria“ 08110 Montcada I Reixac (Barcelona)Tel. +34 93 575 36 46
LM-Machinery S.L.Camino de Portuexe, 27 20018 San SebastianTel. +34 943 331 000
LM Machinery, S.L.Sant Cugat del Vallés (Barcelona)Tel. +34 935 041 265
For the die and mould industry:Juan Martin, S.L.Isaac peral, 6 08960 San Just Desvern (Barcelona)Tel. +34 933 715389
CZECH REPUBLICMORI SEIKI Prague 6th floor of building No. 423, Evropska 178, 160 00 Praha 6Tel. +420 224 362 777
Newtech s.r.o.Evropska 423/178, 160 00 Praha 6Tel. +42 02 3309 0451
MORI SEIKI Sales & Service partners
AUSTRIACNC-PROFI Maschinen-Handels GmbHJosef-Jessernigg-Straße 16 2000 StockerauTel. +43 2266 67740
BELGIUMLandré Machines NVLeuvensesteenweg 510 / 91930 ZaventemTel. +32 2 257 1930
DENMARK C. Henriksen & Co.Baldersbuen 57, PB216, 2640 HedehuseneTel. +45 46 590 566
FINLAND Nugget OyOrmuspellontie 7, PL121, 00701 Helsinki Tel. +358 9 350 5380
GREECETechGroup Ltd425, Thivon Ave. & 4, Galeriou St, 131 21 AthensTel. +30 210 57 85 470
HUNGARYWamatec Hungary Kft.2040 Budaörs, Gyár u. 2 - BITEPTel. +36 23 503 933
IRELANDLister Machine Tools Ltd.PO Box. 838 Bluebell Industrial Estate, Dublin 12Tel. +353 1450 8866
LITHUANIAStevilaMokolai 68460 MarijampoleTel. +370 343 918 01
NETHERLANDSLandré Machines BVLange Dreef 10, 4131 NH Vianen Tel. +31 3473 29 336
NORWAY BERGSLI METALLMASKINER ASBedriftsveien 64 / Kjørbekk 3735 SkienTel. +47 35 50 35 00
POLANDAPX Technologieul. Centralna 27, 05-816 OpaczTel. +48 22 759 62 00
PORTUGALJuan Martin LDAJoao Pereira Venancio, Loja 4 2430 Marinha Grande Tel. +351 244 568610
ROMANIAS.C. Tezmaksan International s.r.l.Calea Victoriei Nr. 85, Bl. 1, Et. 1, Ap. 4, Sector 1, BucharestTel. +40 21 3139313
SLOVAKIANewtech s.r.o.Sturova 5/9, 017 01 Považská BystricaTel. +421 424 340 611
SLOVENIABTS Company D.O.O.Bratislavska 5, SLO-1000 LjubljanaTel. +386 1 5841 400
SWEDENLundwalls ABEA Rosengrens Gata 5 -Box 2105 S-42102 Vastra FrölundaTel. +46 31 348 98 00
SWITZERLANDJosef Binkert AGGrabenstrasse 1, CH-8304 WallisellenTel. +41 44 832 55 55