AUTOMOTIVE€¦ · AUTOMOTIVE 1 TORONTO (HEAD OFFICE) 6601 Goreway Dr. Unit B • Mississauga ON T:...
Transcript of AUTOMOTIVE€¦ · AUTOMOTIVE 1 TORONTO (HEAD OFFICE) 6601 Goreway Dr. Unit B • Mississauga ON T:...
A trusted name, serving Canadian industries since 1939
AUTOMOTIVE
www.docap.com
automotive4 pc Sand Blasting Kit 27
285 Pc Automotive Electrical Repair Kit 27
Air Accessories 24
Auto & Marine Electrical Tool Kit 27
Automotive Lightbulbs 31
Autotex Pink Wiper Blades 23
Battery Bolts 20
Battery Brush 19
Battery Cables 21
Battery Carriers 20
Battery Clips 20
Battery Filler 20
Battery Hold Down 18
Battery Post Shims 19
Battery Terminal Lifter 19
Battery Terminals 17
Block Heater Parts 27
Brake Line Adapters 5
Brake Line Long Nuts 5
Brake Lines 4
Car Fuses 30
Circuit Testers 30
Copper Tubing 6
Dash Controls 11
Driveway Signal Gong 14
Driveway Signal Hose 14
Electric Fans 27
Engine Stud Nuts 1
Engine Studs 1
Expansion Plugs 8
E-Z Lok Repair Kit 15
Flat Fender Washers 15
Fuel Line Hose 14
Fuel Lines 3
Fuel Sending Repair Lines 2
Fuses 28
Grease Fittings 6
Grease Guns & Accessories 22
Grommets 13
Hand Choke Adapter 11
Hose Clamps 7
License Plate Bolts 15
Manifolds Studs 1
Metric Brake Lines 4
Metric Expansion (Frost) Plugs 10
Metric O-Ring Splicing Kit 13
Muffler Clamps 10
Nylon Quick Connect 2
Nylon Repair Slice Line 2
O-Rings 11
Post and Terminal Cleaner 19
Protector Caps 19
Replacement Battery Trays 20
Replacement Side Terminal Bolts 19
Rubber Fuel Line 3
Side Terminal Battery Wrench 19
Spray Guns 24
Steel Battery Clamps 20
Steel Fuel Line Repairs 1
Steel Tubing 6
Terminal Protectors 18
Testers 22
Throttle Ball Joints 16
Transmission Cooler Lines 3
Valve Hardware 24
Wheel Wrenches 22
CA-DO_A-0714-13
AUTOMOTIVE
www.docap.com1 TORONTO (HEAD OFFICE)
6601 Goreway Dr. Unit B • Mississauga ON
T: 905.673.0000 F: 905.673.1333
Toll Free: 1.800.268.6955
MONTREAL900 Montee de Liesse • St. Laurent QC
T: 514.344.3536 F: 514.344.1020
Toll Free: 1.800.361.0297
EDMONTON11716-170th St. • Edmonton AB
T: 780.453.5895 F: 780.454.9302
Toll Free: 1.800.661.1909
CALGARY4311 122nd Ave. S.E. • Calgary AB
F: 780.454.9302 Toll Free: 1.800.661.1909
Product Code
Part Number
Size & Thread (In)
WidthAcross Flats (in)
Thickness(in)
PkgQty
STEEL467-001 NU1 5/16 UNF 1/2 17/64 12
467-004 NU4 3/8 UNF 9/16 21/64 12
467-008 NU8 7/16 UNF 5/8 3/8 12
467-009 NU9 7/16 UNC 5/8 3/8 12
467-013 NU13 1/2 UNF 3/4 7/16 12
BRASS467-022 NU2 5/16 UNF 1/2 17/64 12
467-023 NU3 5/16 UNC 9/16 17/64 12
467-025 NU5 3/8 UNF 9/16 21/64 12
467-026 NU6 3/8 UNC 5/8 21/64 12
467-031 NU11 7/16 UNF 5/8 3/8 12
467-032 NU12 7/16 UNC 3/4 3/8 12
467-034 NU14 1/2 UNF 3/4 7/16 12
467-035 NU15 1/2 UNC 13/16 7/16 12
Product
Code
Part
Number
Diameter &
Length (In)
• A •
Thread
• B •
ThreadDescription
Pkg
Qty
468-113 MS13 3/8” x 2” 1.1/8” USS 5/8 USS GM Stud 12
468-114 MS14 3/8” x 2.1/4” 1.1/4 USS 5/8 USS GM Stud 12
468-115 MS15 3/8” x 2.1/2” 1.1/4 USS 5/8 USS GM Stud 12
468-116 MS16 3/8” x 3” 2 USS 5/8 USS GM Stud 12
468-117 MS17 3/8” x 3.1/4” 1.5/8 USS 5/8 USS GM Stud 12
468-118 MS18 7/16” x 2” 1.1/8 USS 5/8 USS Ford Stud 12
468-119 MS19 7/16” x 2.1/2” 1.1/4USS 5/8 USS Ford Stud 12
468-120 MS20 7/16” x 3” u USS 5/8USS Ford Stud 12
468-122 MS22 8mm x 1.25 3/4 5/8 Datsun/VW Stud 12
468-124 MS24 10mm x 1.50 1/2 1 Toyota Stud 12
468-125 MS25 10mm x 1.25 1/2 1 12
MANIFOLD STUDS(C1018 COLD DRAWN STEEL)
ENGINE STUD NUTS
Product Code
Part Number Description
502-101 3062 3/8” x 9”, metric O-ring, AB bead, 16mm - GM
502-102 3060 3/8” x 18”, metric O-ring, AB bead, 16mm - GM
502-104 3064 3/8” x 36”, metric O-ring, AB bead, 16mm - GM
502-106 3063 5/16” x 9”, metric O-ring, AB bead, 14mm - GM
502-108 3061 5/16” x 18”, metric O-ring, AB bead, 14mm - GM
502-110 3065 5/16” x 36”, metric O-ring, AB bead,14mm- GM
STEEL FUEL LINE REPAIRS
MAB STYLE
BB STYLE
Product Code
Part Number Description
502-112 3066 3/8” x 18”, B bead both ends - GM, FORD
502-114 3067 5/16” x 18”, B bead both ends - GM, FORD
502-116 3095 1/4” x 36”, B bead both ends - GM, FORD
Product Code
Part Number
Diameter x
Length (In)
• A •Thread
• B •Thread
PkgQty
466-100 ST1 5/16” x 2” 7/8 UNF 3/4 UNC 12
466-101 ST2 3/8” x 2” 1UNF 3/4 UNC 12
466-102 ST3 3/8” x 2” 1UNC 5/8 UNC 12
466-103 ST4 3/8” x 3” 1.1/4 UNF 3/4 UNC 12
466-104 ST5 3/8” x 4” 2 UNC 3/4 UNC 12
466-105 ST5A 3/8” x 4” 2 UNF 3/4 UNC 12
466-106 ST6 7/16” x 1.3/4” 9/16 UNF 1/2 UNC 12
466-107 ST7 7/16” x 3.5/8” 2 UNF 3/4 UNC 12
466-108 ST8 7/16” x 4” 2 UNF 3/4 UNF 12
466-109 ST9 1/2” x 4” 2 UNF 3/4 UNC 12
466-112 ST12 7/16” x 3.1/2” 1 UNF 3/4 UNC 12
466-115 ST15 1/2 x 2.1/2 1 UNF 3/4 UNC 12
ENGINE STUDS
• Service all popular cars
• Extra length threads can be cut to size where a shorter stud is required
• Threaded full size on the coarse thread or cylinder and to make a steam
tight fit
• Manufactured in C1018 Cold Drawn Steel
AUTOMOTIVE
2www.docap.com
TORONTO (HEAD OFFICE)6601 Goreway Dr. Unit B • Mississauga ON
T: 905.673.0000 F: 905.673.1333
Toll Free: 1.800.268.6955
MONTREAL900 Montee de Liesse • St. Laurent QC
T: 514.344.3536 F: 514.344.1020
Toll Free: 1.800.361.0297
EDMONTON11716-170th St. • Edmonton AB
T: 780.453.5895 F: 780.454.9302
Toll Free: 1.800.661.1909
CALGARY4311 122nd Ave. S.E. • Calgary AB
F: 780.454.9302 Toll Free: 1.800.661.1909
FUEL SENDING REPAIR LINES
MR STYLE
Product Code
Part Number Description
502-118 30743/8” x 4-3/4”, O-ring flare, 16mm and swaged
end bent 90º - GM
502-120 30755/16” x 4-3/4”, O-ring flare, 14 mm and swaged
end bent 90º - GM
502-122 30763/8” x 12”, O-ring flare, 16mm and swaged end
bent 90º - GM
502-124 30775/16” x 12”, O-ring flare, 14 mm and swaged
end bent 90º - GM
502-126 30783/8” x 18”, O-ring flare, 16mm and swaged end
bent 90º - GM
BR STYLE
Product Code
Part Number Description
502-128 30723/8” x 4-3/4”, B bead and swaged end bent
90º - GM, FORD
502-130 30735/16” x 4-3/4”, B bead and swaged end bent
90º - GM, FORD
502-132 30795/16” x 12”, B bead and swaged end bent 90º
- GM, FORD
502-133 30803/8” x 12”, B bead and swaged end bent 90º
- GM, FORD
ABR STYLE
Product Code
Part Number Description
502-136 30815/16” x 12”, AB bead hose connection and
reduction end bent 90º
502-138 30823/8 “ x 12”, AB bead hose connection and
reduction end bent 90º
502-140 30835/16” x 18”, AB bead hose connection and
reduction end bent 90º
502-142 30843/8” x 18”, AB bead hose connection and
reduction end bent 90º
NYLON REPAIR SLICE LINE
Product Code
Part Number Description
502-144 3085K 8mm x 12”, brass barbs - UNIVERSAL
502-146 3085K24 8mm x 24”, brass barbs - UNIVERSAL
502-148 3085K36 8mm x 36”, brass barbs - UNIVERSAL
502-150 3086K 10mm x 12”, brass barbs - UNIVERSAL
502-152 3086K24 10mm x 24”, brass barbs - UNIVERSAL
502-154 3086K36 10mm x 36”, brass barbs - UNIVERSAL
90º
NYLON QUICK CONNECT
Product Code
Part Number Description
502-155 3068K8mm nylon x 12”, QC 5/16” - 8 mm - 90º
connector - GM, FORD
502-158 3091K8mm nylon x 12”, QC 3/8” - 8 mm - 90º
connector - GM, FORD
502-160 3092K10mm nylon x 12”, QC 3/8” - 10mm - 90º
connector - GM, FORD
STRAIGHT
Product Code
Part Number Description
502-162 3069K8mm nylon x 12”, QC 5/16” - 8 mm - straight
connector - GM, FORD
502-164 3070K8mm nylon x 12”, QC 3/8” - 8 mm - straight
connector - GM, FORD
502-166 3071K10mm nylon x 12” , QC 3/8” - 10 mm - straight
connector - GM, FORD
502-168 3088K8mm nylon x 12’”, QC 1/4” - 8 mm - straight
connector - FORD
502-170 3100K10mm nylon x 12”, QC 3/8” - 10 mm - straight
connector - GM
502-172 3101K8mm nylon x 12”, QC 5/16” - 8 mm - straight
connector - GM
AUTOMOTIVE
www.docap.com3 TORONTO (HEAD OFFICE)
6601 Goreway Dr. Unit B • Mississauga ON
T: 905.673.0000 F: 905.673.1333
Toll Free: 1.800.268.6955
MONTREAL900 Montee de Liesse • St. Laurent QC
T: 514.344.3536 F: 514.344.1020
Toll Free: 1.800.361.0297
EDMONTON11716-170th St. • Edmonton AB
T: 780.453.5895 F: 780.454.9302
Toll Free: 1.800.661.1909
CALGARY4311 122nd Ave. S.E. • Calgary AB
F: 780.454.9302 Toll Free: 1.800.661.1909
STRAIGHT & 90º
Product Code
Part Number Description
502-174 3087K8mm nylon x 24”, QC 5/16” - 8mm - straight
connector and 90º connector - FORD
502-176 3090K8mm nylon x 24”, QC 3/8” - 8mm - straight and
5/16” - 8mm 90º connector - FORD
2 STRAIGHT
Product Code
Part Number Description
502-178 3089K8mm nylon x 24”, QC 3/8” - 8mm - straight and
5/16” - 8 mm - straight - FORD
RUBBER FUEL LINE
Product Code
Part Number Description
502-180 30935/16” x 8” rubber hose with straight steel quick
connect - GM, CHRYS
45º
STRAIGHT
Product Code
Part Number Description
502-182 30945/16” x 4” rubber hose with 45º steel quick
connect - GM,CHRYS
TRANSMISSION COOLER LINES
Product Code Part Number Size Pkg
Qty
5/16” Diameter
502-306 FL506 6” 1
502-312 FL512 12” 1
502-324 FL524 24” 1
502-348 FL548 48” 1
3/8” Diameter
502-406 FL606 6” 1
502-412 FL612 12” 1
502-424 FL624 24” 1
502-448 FL648 48” 1
Product Code
Part Number Diameter Description Pkg
Qty
502-810 S-560 C 5/16” Chrysler Trans. 1
502-820 S-560 GM 5/16” GM Trans. 1
502-830 S-566 5/16” Ford Trans 1
502-840 S-566 B 5/16” Ford Beaded 1
• Cut to length
• Fittings attached
• Length 60”
• Replacement fuel line complete with metric fitting and fuel rated o-ring
FUEL LINESNYLON QUICK CONNECT (CONT)
AUTOMOTIVE
4www.docap.com
TORONTO (HEAD OFFICE)6601 Goreway Dr. Unit B • Mississauga ON
T: 905.673.0000 F: 905.673.1333
Toll Free: 1.800.268.6955
MONTREAL900 Montee de Liesse • St. Laurent QC
T: 514.344.3536 F: 514.344.1020
Toll Free: 1.800.361.0297
EDMONTON11716-170th St. • Edmonton AB
T: 780.453.5895 F: 780.454.9302
Toll Free: 1.800.661.1909
CALGARY4311 122nd Ave. S.E. • Calgary AB
F: 780.454.9302 Toll Free: 1.800.661.1909
• Standard, armored and metric
• Hydraulic brake line
• Cut to length
• Both ends double flared with UNC fittings
• Armored brake lines have .046 carbon galvanized wire wound around
entire length
Product Code Part Number Length Pkg Qty
3/16” DIAMETER500-312 BL312 12” 1
500-320 BL320 20” 1
500-330 BL330 30” 1
500-340 BL340 40” 1
500-351 BL351 51” 1
500-360 BL360 60” 1
500-372 BL372 72” 1
1/4” DIAMETER500-408 BL408 8” 1
500-412 BL412 12” 1
500-420 BL420 20” 1
500-430 BL430 30” 1
500-440 BL440 40” 1
500-451 BL451 51” 1
500-460 BL460 60” 1
500-472 BL472 72” 1
5/16” DIAMETER500-512 BL512 12” 1
500-520 BL520 20” 1
500-530 BL350 30” 1
500-540 BL540 40” 1
500-551 BL551 51” 1
500-560 BL560 60” 1
500-572 BL572 72” 1
3/8” DIAMETER500-612 BL612 12” 1
500-620 BL620 20” 1
500-630 BL630 30” 1
500-640 BL640 40” 1
500-651 BL651 51” 1
500-660 BL660 60” 1
500-672 BL672 72” 1
BRAKE LINES
STANDARD
Product Code Part Number Holds Sizes Pkg Qty
502-234 BLD34E 3/16” to 1/4” dia 1
502-256 BLD56E 5/16” to 3/8” dia 1
BRAKE LINE MERCHANDISER
Product Code Part Number Length Pkg Qty
3/16” DIAMETER501-312 BL312SA 12” 1
501-320 BL320SA 20” 1
501-330 BL330SA 30” 1
501-340 BL340SA 40” 1
501-351 BL351SA 51” 1
501-360 BL360SA 60” 1
501-372 BL372SA 72” 1
1/4” DIAMETER501-412 BL412SA 12” 1
501-420 BL420SA 20” 1
501-430 BL430SA 30” 1
501-440 BL440SA 40” 1
501-451 BL451SA 51” 1
501-460 BL460SA 60” 1
501-472 BL472SA 72” 1
5/16” DIAMETER501-512 BL512SA 12” 1
501-520 BL520SA 20” 1
501-530 BL530SA 30” 1
501-540 BL540SA 40” 1
501-551 BL551SA 51” 1
501-560 BL560SA 60” 1
501-572 BL572SA 72” 1
3/8” DIAMETER501-612 BL612SA 12” 1
501-620 BL620SA 20” 1
501-630 BL630SA 30” 1
501-640 BL640SA 40” 1
501-651 BL651SA 51” 1
501-660 BL660SA 60” 1
501-672 BL672SA 72” 1
ARMOURED
METRIC BRAKE LINES
• 10mm Fittings
Product Code Length Pkg Qty
3/16” DIAMETER500-313 12” 1
500-321 20” 1
500-331 30” 1
500-341 40” 1
500-352 51” 1
500-361 60” 1
STANDARD
AUTOMOTIVE
www.docap.com5 TORONTO (HEAD OFFICE)
6601 Goreway Dr. Unit B • Mississauga ON
T: 905.673.0000 F: 905.673.1333
Toll Free: 1.800.268.6955
MONTREAL900 Montee de Liesse • St. Laurent QC
T: 514.344.3536 F: 514.344.1020
Toll Free: 1.800.361.0297
EDMONTON11716-170th St. • Edmonton AB
T: 780.453.5895 F: 780.454.9302
Toll Free: 1.800.661.1909
CALGARY4311 122nd Ave. S.E. • Calgary AB
F: 780.454.9302 Toll Free: 1.800.661.1909
Product Code Length Pkg Qty
3/16” DIAMETER501-313 12” 1
501-321 20” 1
501-331 30” 1
501-341 40” 1
501-352 51” 1
501-361 60” 1
ARMOURED
Product Code Part Number Length Pkg Qty
3/16” DIAMETER502-608 MB308 8” 1
502-612 MB312 12” 1
502-620 MB320 20” 1
502-630 MB330 30” 1
502-640 MB340 40” 1
502-651 MB351 51” 1
502-660 MB360 60” 1
BRITISH - I.S.O. BUBBLE FLARE
Product Code Part Number Length Pkg Qty
3/16” DIAMETER502-708 MJ308 8” 1
502-712 MJ312 12” 1
502-720 MJ320 20” 1
502-730 MJ330 30” 1
502-740 MJ340 40” 1
502-751 MJ351 51” 1
502-760 MJ360 60” 1
JAPANESE - STANDARD FLARE
BRAKE LINE LONG NUTS
• For standard brake lines
• UNC fittings
Product Code Part Number Length Pkg Qty
502-007 BLLN-3 3/16” 1
502-009 BLLN-4 1/4” 1
BRAKE LINE ADAPTERS
Product Code Contains 2 each of Pkg Qty
502-100 1074 7818 7910 1
7727 7829 7911
7732 7908 BLLN3
7817 7909 BLLN4
BRAKE LINE ADAPTER ASSORTMENTS
• 12 sizes in a handy polypropylene box
BRAKE LINE ADAPTERS
Product Code
Part Number
TubeO.D. Description Pkg
Qty
502-016 1074 5/16” to 1/2-20 port 1
502-019 7727 1/4” to 1/2-20 port 1
502-021 7732 1/4” to 7/16-20 port 1
502-027 7817 3/16” to 1/2-20 port 1
502-028 7818 3/16” to 1/4” inverted (7/16-24) 1
502-029 7829 1/4” to 5/16” inverted seat
(1/2-20)1
502-030 7908 1/4” to 9/16 - 18 port with 1/4”
inverted seat1
502-031 7909 3/16” to 5/16” inverted ( 1/2-20) 1
502-032 7910 3/16” to 9/16-20 port with 3/16”
inverted seat1
502-033 7911 3/16”9/16-18 port with 3/16”
inverted seat1
502-035 3/16 “British and Japanese
fitting1
METRIC BRAKE LINES (CONT)
AUTOMOTIVE
6www.docap.com
TORONTO (HEAD OFFICE)6601 Goreway Dr. Unit B • Mississauga ON
T: 905.673.0000 F: 905.673.1333
Toll Free: 1.800.268.6955
MONTREAL900 Montee de Liesse • St. Laurent QC
T: 514.344.3536 F: 514.344.1020
Toll Free: 1.800.361.0297
EDMONTON11716-170th St. • Edmonton AB
T: 780.453.5895 F: 780.454.9302
Toll Free: 1.800.661.1909
CALGARY4311 122nd Ave. S.E. • Calgary AB
F: 780.454.9302 Toll Free: 1.800.661.1909
STEEL TUBING
Product Code
Part No Size
O.D.Size
ApproxI.D.
Ultimate Bursting Strength
(p.s.i.)Ft/lb Pkg
Qty
503-007 BLT3 3/16” X 25’ 3/16” 0.131 16,500 21.2 1
503-009 BLT4 1/4” X 25’ 1/4” 0.194 12,500 15.8 1
503-010 BLT5 5/16” X 25’ 5/16” 0.256 9,900 12.5 1
503-011 BLT6 3/8” X 25’ 3/8” 0.319 8,200 10.0 1
• Double walled annealed
• Tin Coated
• Standard wall thickness - 0.028”
• Standard length - 25’
Product Code
SizeO.D.
Length(ft)
Wall Thickness P.S.I. Pkg
Qty
559-208 1/8 in (3.18mm) 25 0.030 in (0.762mm) 2780 1
559-212 3/16 in (4.76mm) 25 0.030 in (0.762mm) 1860 1
559-216 1/4 in (6.35mm) 25 0.030 in (0.762mm) 1380 1
559-220 5/16 in (7.94mm) 25 0.032 in (0.813mm) 1260 1
559-224 3/8 in (9.52mm) 25 0.032 in (0.813mm) 1060 1
559-232 1/2 in (12.70mm) 25 0.032 in (0.813mm) 800 1
559-240 5/8 in (15.88mm) 25 0.035 in (0.889mm) 700 1
559-248 3/4 in (19.05mm) 25 0.035 in (0.889mm) 580 1
559-508 1/8 in (3.18mm) 50 0.030 in (0.762mm) 2780 1
559-512 3/16 in (4.76mm) 50 0.030 in (0.762mm) 1860 1
559-516 1/4 in (6.35mm) 50 0.030 in (0.762mm) 1380 1
559-520 5/16 in (7.94mm) 50 0.032 in (0.813mm) 1260 1
559-524 3/8 in (9.52mm) 50 0.032 in (0.813mm) 1060 1
559-532 1/2 in (12.70mm) 50 0.032 in (0.813mm) 800 1
559-540 5/8 in (15.88mm) 50 0.035 in (0.889mm) 700 1
559-548 3/4 in (19.05mm) 50 0.035 in (0.889mm) 580 1
• Seamless
• Soft annealed
• Bright finish
COPPER TUBING
STANDARD GREASE FITTINGS ASSORTMENT
METRIC GREASE FITTINGS ASSORTMENT
• Contains 100 of the fastest selling fittings in compartmentalized box.
• Contains 100 metric grease fittings in compartmentalized box.
• Contains 110 metric grease fittings in compartmentalized box.
GREASE FITTINGS
506-100 (GF100)
Product Code Part Number Qty
506-612 GF612 3
506-613 GF613 3
506-637 GF637 15
506-641 GF641 50
506-688 GF688 4
506-911 GF911 10
506-610 GF610 15
506-101 (GF101)
Product Code Part Number Diameter Qty
506-871 GF8701 6mm STR 50
506-745 GF7045 6mm 45° 25
506-790 GF7090 6mm 90° 25
506-102 (GF102)
Product Code Part Number Diameter Qty
506-871 GF8701 6mm STR 40
506-891 GF8901 8mm STR 20
506-931 GF9301 10mm STR 20
506-745 GF7045 6mm 45° 5
506-845 GF7445 8mm 45° 5
506-945 GF9345 10mm 45° 5
506-790 GF7090 6mm 90° 5
506-890 GF7490 8mm 90° 5
560-990 GF9390 10mm 90° 5
AUTOMOTIVE
www.docap.com7 TORONTO (HEAD OFFICE)
6601 Goreway Dr. Unit B • Mississauga ON
T: 905.673.0000 F: 905.673.1333
Toll Free: 1.800.268.6955
MONTREAL900 Montee de Liesse • St. Laurent QC
T: 514.344.3536 F: 514.344.1020
Toll Free: 1.800.361.0297
EDMONTON11716-170th St. • Edmonton AB
T: 780.453.5895 F: 780.454.9302
Toll Free: 1.800.661.1909
CALGARY4311 122nd Ave. S.E. • Calgary AB
F: 780.454.9302 Toll Free: 1.800.661.1909
• Set contains :
- 8 Plated housing and screws
- Stainless steel band
Product Code Description Pkg Qty
508-000 8mm x3m Hose Clamp Set 1
508-001 12.7mm x 3m Hose Clamp Set 1
HOSE CLAMPS
HOSE CLAMP SETS “CUT TO SIZE”
MINIATURE
• 8mm band width
• Stainless steel bands with plated
housing and screw
Product Code Part Number Clamp Diameter Min Max Pkg Qty
508-002 M4P 13/32” 5/8” 10
508-003 M6P 1/2” 3/4” 10
508-004 M8P 5/8” 7/8” 10
Product Code Part Number Clamp Diameter Min Max Pkg Qty
508-006 B6H 3/8” 3/4” 10
508-008 B8H 3/8” 7/8” 10
508-010 B10H 3/4” 1.1/16” 10
508-012 B12H 5/8” 1.1/4” 10
508-016 B16H 13/16” 1.1/2” 10
508-020 B20H 3/4” 1.3/4” 10
508-024 B24H 1.1/4” 2” 10
508-028 B28H 1.1/2” 2.1/4” 10
508-032 B32H 1.9/16” 2.1/2” 10
508-036 B36H 1.13/16” 2.3/4” 10
508-040 B40H 2.1/4” 3” 10
508-044 B44H 2.5/8" 3.1/4” 10
508-048 B48H 2.9/16” 3.1/2” 10
508-052 B52H 2.13/16” 3.3/4” 10
STANDARD
• Precision engineered worm drive
• Rounded edges protect hose
• Stainless steel band with plated
housing and screw
Product Code
Part Number Diameter Type Pkg
Qty
STANDARD
506-610 GF610 1/8” NPT Straight long 25
506-611 GF611 1/8” NPT 30º angle 25
506-612 GF612 1/8” NPT 65º angle 25
506-613 GF613 1/8” NPT 90º angle 25
506-627 GF627 1/4” NPT Straight short 25
506-629 GF629 1/4” NPT 65º angle (pipe thread) 25
506-636 GF636 1/4” 45º long (taper) 25
506-637 GF637 1/4” 45º short (taper) 25
506-641 GF641 1/4” Straight very short (taper) 25
506-652 GF652 1/4” Straight long (taper) 25
506-688 GF688 1/8” NPT 45º angle short 25
506-710 GF710 3/8” Straight 25
506-711 GF711 5/16” Straight 25
506-911 GF911 1/4” 90º angle short (taper) 25
METRIC
506-745 GF7045 6 mm 45º angle 25
506-790 GF7090 6 mm 90º angle 25
506-871 GF8701 6 mm Straight 25
506-845 GF7445 8 mm 45º angle 25
506-890 GF7490 8 mm 90º angle 25
506-891 GF8901 8 mm Straight 25
506-931 GF9301 10 mm Straight 25
506-945 GF9345 10 mm 45º angle 25
506-990 GF9390 10 mm 90º angle 25
DRIVE FIT
506-991 GF1728 3/16” 25
506-992 GF1743 1/4” 25
506-993 GF1608 5/16” 25
GREASE FITTINGS
• Conforms to S.A.E. specifications
• Case hardened
GREASE FITTINGS (CONT)
AUTOMOTIVE
8www.docap.com
TORONTO (HEAD OFFICE)6601 Goreway Dr. Unit B • Mississauga ON
T: 905.673.0000 F: 905.673.1333
Toll Free: 1.800.268.6955
MONTREAL900 Montee de Liesse • St. Laurent QC
T: 514.344.3536 F: 514.344.1020
Toll Free: 1.800.361.0297
EDMONTON11716-170th St. • Edmonton AB
T: 780.453.5895 F: 780.454.9302
Toll Free: 1.800.661.1909
CALGARY4311 122nd Ave. S.E. • Calgary AB
F: 780.454.9302 Toll Free: 1.800.661.1909
Product Code Part Number Clamp Diameter Min Max
Pkg Qty
508-056 B56H 3.1/16” 4” 10
508-064 B64H 3.9/16” 4.1/2” 10
508-072 B72H 4.1/8” 5” 10
508-080 B80H 4.5/8” 5.1/2” 10
508-088 B88H 5.1/8” 6” 10
508-096 B96H 5.1/8” 6.1/2” 10
508-104 B104H 5.3/4” 7” 10
508-116 B116H 6.1/2” 7.3/4” 10
STANDARD (CONT)
• Specialized for any fuel injection application
• Band width is .35” ( 8.9 mm)
• Manufactured in a nut and bolt design,
non-perforated band is aluzinc coated
carbon with a zinc plated carbon screw
and nut
Product Code
Part Number
LengthMax. Min.
HoseI.D. Pkg Qty
508-504 F4 7/16” 1/2” 1/4” 10
508-506 F6 1/2” 19/32 “ 5/16” 10
508-508 F8 9/16” 5/8” 3/8” 10
FUEL INJECTION
Product Code Part Number Clamp Diameter Min Max Pkg Qty
509-506 B6HS 3/8” 3/4” 10
509-508 B8HS 3/8” 7/8” 10
509-510 B10HS 3/4” 1.1/16” 10
509-512 B12HS 5/8” 1.1/4” 10
509-516 B16HS 13/16” 1.1/2” 10
509-520 B20HS 3/4” 1.3/4” 10
509-524 B24HS 1.1/4” 2” 10
509-528 B28HS 1.1/2” 2.1/4” 10
509-532 B32HS 1.9/16” 2.1/2” 10
509-536 B36HS 1.13/16” 2.3/4” 10
509-540 B40HS 2.1/4” 3” 10
509-544 B44HS 2.5/8" 3.1/4” 10
509-548 B48HS 2.9/16” 3.1/2” 10
509-552 B52HS 2.13/16” 3.3/4” 10
509-556 B56HS 3.1/16” 4” 10
509-564 B64HS 3.9/16” 4.1/2” 10
509-572 B72HS 4.1/8” 5” 10
509-580 B80HS 4.5/8” 5.1/2” 10
509-588 B88HS 5.1/8” 6” 10
509-596 B96HS 5.1/8” 6.1/2” 10
509-604 B104HS 5.3/4” 7” 10
509-616 B116HS 6.1/2” 7.3/4” 10
• Precision engineered worm drive
• Rounded edges protect hose
• All stainless steel parts (band, screw
and housing)
• 5/16” Hex Head screw, 14 mm band
width
• Packed 10 clamps per box
STAINLESS STEEL
EXPANSION PLUGS
• Can be used in all climates
• Specially compounded neoprene rubber resists
heat oil, coolants and rust inhibitors
• Expands up to 1/8” to seal against irregularities
Product Code Size (Inches) Pkg Qty
510-200 3/4 1
510-201 7/8 1
510-202 1 1
510-203 1.1/8 1
510-204 1.1/4 1
510-205 1.3/8 1
510-206 1.1/2 1
510-207 1.5/8 1
510-208 1.3/4 1
510-209 1.7/8 1
510-210 2 1
510-211 2.1/8 1
510-212 2.1/4 1
E-Z SEAL
Product Code Part Number
Nominal PlugSize (Inches)
Ref. DecimalSize Outside
Dia. ±.005Pkg Qty
510-001 P1
510-002 P2 5/8 0.625 10
510-003 P3 3/4 0.750 10
510-006 P6 7/8 0.875 10
510-007 P7 15/16 0.963 10
510-008 P8 1 1.000 10
510-009 P9 1.1/16 1.062 10
510-010 P10 1.1/8 1.125 10
510-011 P11 1.1/4 1.250 10
510-012 P12 1.3/8 1.375 10
510-013 P13 1.1/2 1.500 10
510-014 P14 1.5/8 1.625 10
510-015 P15 1.3/4 1.750 10
510-020 P20 1.7/8 1.875 10
510-021 P21 1.3/16 1.87 10
510-022 P22 2.1/4 2.250 10
510-023 P23 1.5/16 1.312 10
510-026 P26 2 2.000 10
510-028 P28 2.1/2 2.500 10
510-037 P37 7/16 00437 10
510-043 P43 1.15/16 1.937 10
510-044 P44 2.1/8 2.125 10
510-045 P45 11/16 0.687 10
510-046 P46 1/2 0.500 10
510-047 P47 9/16 0.563 10
510-062 P62 2.3/4 2.750 10
510-068 P68 2.1/16 2.062 10
510-102 P102 1.31/64 1.484 10
510-103 P103 1.47/64 1.734 10
510-129 P129 2.7/64 2.105 10
CONCAVE TYPE
HOSE CLAMPS (CONT)
AUTOMOTIVE
www.docap.com9 TORONTO (HEAD OFFICE)
6601 Goreway Dr. Unit B • Mississauga ON
T: 905.673.0000 F: 905.673.1333
Toll Free: 1.800.268.6955
MONTREAL900 Montee de Liesse • St. Laurent QC
T: 514.344.3536 F: 514.344.1020
Toll Free: 1.800.361.0297
EDMONTON11716-170th St. • Edmonton AB
T: 780.453.5895 F: 780.454.9302
Toll Free: 1.800.661.1909
CALGARY4311 122nd Ave. S.E. • Calgary AB
F: 780.454.9302 Toll Free: 1.800.661.1909
CUP TYPE (CONT.)
Product Code
Part Number
Nominal Plug Size (Inches)
Ref. DecimalSize Outside
Dia. ±.005
Overall Height
Pkg Qty
511-016 PC16 1 1.014 0.281 10
511-017 PC17 1.7/32 1.2275 0.531 10
511-018 PC18 1.1/4 1.2575 0.437 10
511-025 PC25 1.1/8 1.1325 0.437 10
511-029 PC29 7/8 0.8875 0.312 10
511-030 PC30 1.1/2 1.522 0.375 10
511-038 PC38 3/4 0.7525 0.25 10
511-039 PC39 15/16 0.9945 0.375 10
511-040 PC40 1.15/16 1.9475 0.800 10
511-041 PC41 1.5/8 1.6375 0.593 10
511-042 PC42 1.61/64 1.9555 0.718 10
511-048 PC48 9/16 0.5725 0.250 10
511-050 PC50 1.7/8 1.8925 0.447 10
511-052 PC52 5/8 0.6325 0.250 10
511-054 PC54 19/32 0.5925 0.281 10
511-069 PC69 2.1/64 2.0175 0.590 10
511-070 PC70 1.45/64 1.7075 0.812 10
511-072 PC72 29/32 0.912 0.390 10
511-075 PC75 1.3/4 1.7625 0.363 10
511-077 PC77 59/64 0.912 0.312 10
511-080 PC80 1.3/8 1.3875 0.500 10
511-081 PC81 2.1/4 2.265 0.812 10
511-082 PC82 1.3/4 1.7625 0.593 10
511-084 PC84 2.9/64 2.1485 0.600 10
511-085 PC85 1.1/2 1.5075 0.625 10
511-086 PC86 1.1/16 1.077 0.640 10
511-087 PC87 33/64 0.5195 0.187 10
511-088 PC88 29/64 0.450 0.203 10
511-089 PC89 2.37/64 2.575 0.301 10
511-090 PC90 2.17/64 2.264 0.355 10
511-092 PC92 2.25/64 2.396 0.310 10
511-093 PC93 7/16 0.4445 0.156 10
511-094 PC94 37/64 0.572 0.203 10
511-095 PC95 1/2 0.527 0.312 10
511-097 PC97 17/32 0.5425 0.250 10
511-099 PC99 1.1/4 1.2575 0.343 10
511-101 PC101 11/32 0.3405 0.240 10
511-105 PC105 17/64 0.2725 0.200 10
511-106 PC106 1.49/64 1.7655 0.406 10
511-107 PC107 3/8 0.3905 0.240 10
511-109 PC109 31/64 0.488 0.234 10
511-111 PC111 1 1.016 0.400 10
511-112 PC112 2.1/16 2.0675 0.510 10
511-113 PC113 2 2.009 0.635 10
511-128 PC128 5/16 0.3135 0.296 10
511-131 PC131 2.3/32 2.0975 0.610 10
511-132 PC132 2.1/2 2.510 0.465 10
511-133 PC133 1.1/2 1.506 0.325 10
511-134 PC134 1.13/64 1.200 0.420 10
511-137 PC137 7/8 0.8825 0.359 10
511-140 PC140 21/32 0.658 0.265 10
511-144 PC144 11/16 0.700 0.250 10
Product Code
Part Number
Nominal Plug Size (Inches)
Ref. DecimalSize Outside
Dia. ±.005
Overall Height
Pkg Qty
511-145 PC145 3/4 0.7625 0.265 10
511-146 PC146 2 2.008 0.415 10
511-147 PC147 2.3/16 2.199 0.360 10
511-149 PC149 1.41/64 1.642 0.350 10
511-151 PC151 11/16 0.701 0.193 10
511-152 PC152 1.15/16 1.9325 0.468 10
511-153 PC153 2.5/32 2.1575 0.358 10
511-156 PC156 7/8 0.878 0.375 10
511-158 PC158 45/64 0.703 0.205 10
511-163 PC163 7/8 0.870 0.312 10
511-164 PC164 51/64 0.790 0.312 10
511-166 PC166 9/16 0.555 0.201 10
511-167 PC167 1.29/32 1.902 0.600 10
511-168 PC168 7/16 0.440 0.170 10
511-169 PC169 1/2 0.510 0.258 10
511-174 PC174 1.5/64 1.072 0.280 10
511-185 PC185 51/64 0.792 0.406 10
511-249 PC149A 1.45/64 1.698 0.358 10
511-275 PC75A 1.3/4 1.791 0.380 10
SHALLOW TYPE
Product Code
Part Number
Nominal Plug Size (Inches)
Ref. DecimalSize Outside
Dia. ±.005
Overall Height
Pkg Qty
511-057 PS57 1.3/4 1.7625 0.250 10
511-058 PS58 1.31/32 1.9775 0.218 10
511-059 PS59A 2.1/16 2.0725 0.343 10
511-065 PS65 1.29/32 1.911 0.265 10
511-066 PS66 2 2.025 0.406 10
511-071 PS71 2.5/32 2.1535 0.328 10
511-074 PS74 2.3/16 2.192 0.343 10
511-076 PS76 1.45/64 1.703 0.281 10
511-078 PS78 2-7/64 2.101 0.296 10
511-083 PS83 2.1/64 2.0175 0.240 10
511-096 PS96 1.51/64 1.8025 0.250 10
511-098 PS98 35/64 0.5425 0.187 10
511-110 PS110 1.1/4 1.2625 0.312 10
511-126 PS126 1.5/8 1.6375 0.365 10
511-127 PS127 1.21/64 1.3225 0.281 10
511-135 PS135 1.3/8 1.385 0.340 10
511-150 PS150 2.3/32 2.1025 0.270 10
511-154 PS154 2.7/32 2.2205 0.305 10
511-157 PS157 2.15/64 2.230 0.280 10
511-159 PS159 2.7/64 2.109 0.296 10
511-162 PS162 5/8 0.631 0.190 10
511-165 PS165 2 2.010 0.310 10
511-170 PS170 2.9/64 2.135 0.360 10
511-171 PS171 1.9/16 1.570 0.315 10
511-172 PS172 1.59/64 1.922 0.235 10
511-173 PS173 1.53/64 1.825 0.350 10
511-175 PS175 2.1/4 2.262 0.350 10
CUP TYPE
EXPANSION PLUGS (CONT)
AUTOMOTIVE
10www.docap.com
TORONTO (HEAD OFFICE)6601 Goreway Dr. Unit B • Mississauga ON
T: 905.673.0000 F: 905.673.1333
Toll Free: 1.800.268.6955
MONTREAL900 Montee de Liesse • St. Laurent QC
T: 514.344.3536 F: 514.344.1020
Toll Free: 1.800.361.0297
EDMONTON11716-170th St. • Edmonton AB
T: 780.453.5895 F: 780.454.9302
Toll Free: 1.800.661.1909
CALGARY4311 122nd Ave. S.E. • Calgary AB
F: 780.454.9302 Toll Free: 1.800.661.1909
Product Code Part Number
NominalO.D.
NominalH.T. Pkg Qty
512-002 PCM002 20mm 6.1 10
512-004 PCM004 18mm 5.9 10
512-006 PCM006 30mm 8.1 10
512-008 PCM008 32mm 10.2 10
512-012 PCM012 40mm 11.7 10
512-014 PCM014 45mm 11.9 10
512-016 PCM016 47mm 7.4 10
512-020 PCM020 50mm 12.0 10
512-022 PCM022 45mm 13.5 10
512-024 PCM024 35mm 10.4 10
512-030 PCM030 25mm 4.8 10
512-032 PCM032 12mm 5.3 10
512-034 PCM034 14mm 5.0 10
512-040 PCM040 24mm 6.9 10
512-042 PCM042 25mm 7.0 10
512-044 PCM044 25mm 8.3 10
512-046 PCM046 27mm 8.4 10
512-048 PCM048 28mm 8.7 10
512-050 PCM050 29mm 11.4 10
512-052 PCM052 36mm 8.5 10
512-056 PCM056 38mm 7.9 10
512-058 PCM058 39mm 9.5 10
512-060 PCM060 40mm 7.2 10
512-062 PCM062 40mm 12.8 10
512-064 PCM064 41mm 11.9 10
512-066 PCM066 45mm 9.5 10
512-068 PCM068 50mm 14.8 10
512-070 PCM070 53mm 8.7 10
Product Code Part Number
NominalO.D.
NominalH.T. Pkg Qty
512-013 PM013 24mm 5.0 10
512-015 PM015 40mm 6.6 10
512-017 PM017 21mm 4.5 10
512-019 PM019 16mm 2.9 10
512-021 PM021 45mm 6.1 10
512-023 PM023 52mm 6.8 10
METRIC EXPANSION (FROST) PLUGS
• Plated
• Metric dimensions taken from points shown
DISC TYPE
MUFFLER CLAMPS
Product Code Part Number Size (Inches) Pkg Qty
5/16” DIAMETER
513-100 MC118 1.1/8” 50
513-101 MC114 1.1/4” 50
513-102 MC138 1.3/8” 50
STANDARD
• Smooth saddle type
• 5/16” diameter U-bolts
• Full depth saddle for extra strength
Product Code Part Number Size (Inches) Pkg Qty
5/16” DIAMETER
513-400 HD400WT 4” 1
513-500 HD500WT 5” 1
HEAVY DUTY
EXHAUST STACK CLAMP
• 3/8” diameter U-bolts
• Heavy gauge steel saddle
• Flattened U-bolt
• Reinforced welded saddle
• 5/16” over nominal diameter to
accommodate extra thick wall and flexible
exhaust pipes
• Zinc chromate plated
Product Code Part Number Size (Inches) Pkg Qty
3/8” DIAMETER
513-198 HD112 1.1/2” 50
513-199 HD158 1.5/8” 50
513-200 HD134 1.3/4” 50
513-201 HD178 1.7/8” 50
513-202 HD200 2” 50
513-203 HD218 2.1/8” 50
513-204 HD214 2.1/4” 50
513-205 HD212 2.1/2” 50
513-206 HD234 2.3/4” 50
513-207 HD300 3” 50
513-208 HD312 3.1/2” 50
513-209 HD400 4” 20
513-210 HD412 4.1/2” 20
513-211 HD500 5” 20
513-212 HD512 5.1/2” 20
513-213 HD600 6” 20
CUP TYPE
AUTOMOTIVE
www.docap.com11 TORONTO (HEAD OFFICE)
6601 Goreway Dr. Unit B • Mississauga ON
T: 905.673.0000 F: 905.673.1333
Toll Free: 1.800.268.6955
MONTREAL900 Montee de Liesse • St. Laurent QC
T: 514.344.3536 F: 514.344.1020
Toll Free: 1.800.361.0297
EDMONTON11716-170th St. • Edmonton AB
T: 780.453.5895 F: 780.454.9302
Toll Free: 1.800.661.1909
CALGARY4311 122nd Ave. S.E. • Calgary AB
F: 780.454.9302 Toll Free: 1.800.661.1909
Product Code Part Number Length Pkg Qty
516-151 A-60 60” 1
516-152 A-72 72” 1
516-153 A-90 90” 1
Product Code Part Number Pkg Qty
516-226 DLX-22 1
• Fits 95% of all carburetor applications
• Perfect fit. No mess. No springs. No fuss
• Easy profitable installation
• Saves gas - prevents hard starting
• Complete including control wire and two “ see through” plastic caps for
easier installation
DASH CONTROLS
HAND CHOKE ADAPTER
• Standard
• Superior quality
• 17 gauge steel casing, 18 gauge control wire
• Made from a special nitrile
compound - BUNA-N rubber
• Available standard, metric and
high pressure
• Contains 407 pieces
• 32 Popular Sizes
• Packed in durable plastic box
• Contains 300 pieces
• 30 Popular Sizes
• Packed in metal box
O-RING ASSORTMENTS
STANDARD O-RING ASSORTMENT (300 PCS)
STANDARD O-RING ASSORTMENTS (407 PCS)
O - RINGS
UNIVERSAL TAIL PIPE HANGERS
Product Code Part Number Description Pkg Qty
514-200 THU200 Universal 1
514-360 THU360 Universal 1
514-403 THU403 Bracket only 1
• Swivel to any position - grips firmly
• Fits all pipes 1.1/2” to 2” O.D.
• Heavy gauge steel with fabric insert to absorb road shock
• Individually boxed with bolts, nuts and lockwashers
MUFFLER CLAMPS (CONT)
519-301
Product Code
Part Number Qty Product
CodePart
Number Qty
519-001 R-1 20 519-016 R-16 10
519-003 R-3 20 519-017 R-17 10
519-005 R-5 20 519-018 R-18 10
519-006 R-6 20 519-019 R-19 10
519-007 R-7 20 519-020 R-20 10
519-070 R-7A 20 519-021 R-21 10
519-008 R-8 13 519-022 R-22 10
519-009 R-9 13 519-023 R-23 10
519-010 R-10 13 519-024 R-24 10
519-011 R-11 13 519-025 R-25 10
519-012 R-12 13 519-026 R-26 10
519-013 R-13 13 519-027 R-27 10
519-014 R-14 13 519-270 R-27A 10
519-140 R-14A 13 519-271 R-27B 10
519-141 R-14B 13 519-272 R-27C 10
519-015 R-15 10 519-273 R-27C 10
519-300
Product Code
Part Number Qty Product
CodePart
Number Qty
519-001 R-1 10 519-016 R-16 10
519-002 R-2 10 519-017 R-17 10
519-003 R-3 10 519-018 R-18 10
519-004 R-4 10 519-019 R-19 10
519-005 R-5 10 519-020 R-20 10
519-006 R-6 10 519-021 R-21 10
519-007 R-7 10 519-022 R-22 10
519-008 R-8 10 519-023 R-23 10
519-009 R-9 10 519-024 R-24 10
519-010 R-10 10 519-025 R-25 10
519-011 R-11 10 519-026 R-26 10
519-012 R-12 10 519-027 R-27 10
519-013 R-13 10 519-028 R-28 10
519-014 R-14 10 519-029 R-29 10
519-015 R-15 10 519-030 R-30 10
AUTOMOTIVE
12www.docap.com
TORONTO (HEAD OFFICE)6601 Goreway Dr. Unit B • Mississauga ON
T: 905.673.0000 F: 905.673.1333
Toll Free: 1.800.268.6955
MONTREAL900 Montee de Liesse • St. Laurent QC
T: 514.344.3536 F: 514.344.1020
Toll Free: 1.800.361.0297
EDMONTON11716-170th St. • Edmonton AB
T: 780.453.5895 F: 780.454.9302
Toll Free: 1.800.661.1909
CALGARY4311 122nd Ave. S.E. • Calgary AB
F: 780.454.9302 Toll Free: 1.800.661.1909
• Contains 408 pieces
• 32 Popular Sizes
• Packed in durable plastic box
• Contains 212 pieces, 20 different sizes
• 90 Durable hardness O-Rings are designed for high pressure industrial
applications: pumps, motors, valves and cylinders
• Unique box is equipped with brass tool for O-ring extraction
• Meets ASTM D2000, SAEJ200, AS568 standards
• Material BUNA-N BG915
• BUNA-N Rubber
METRIC O-RING ASSORTMENT
HIGH PRESSURE O-RING ASSORTMENT
O - RINGS (CONT)
Product Code
Part Number I.D. (in) Nominal Size
O.D. (in) Section Pkg Qty
519-001 R-1 1/8 1/4 1/16 25
519-002 R-2 5/32 9/32 1/16 25
519-003 R-3 3/16 5/16 1/16 25
519-004 R-4 7/32 11/32 1/16 25
519-005 R-5 1/4 3/8 1/16 25
519-006 R-6 5/16 7/16 1/16 25
519-007 R-7 3/8 1/2 1/16 25
519-008 R-8 3/8 9/16 3/32 25
519-009 R-9 7/16 5/8 3/32 25
519-010 R-10 1/2 11/16 3/32 25
519-011 R-11 9/16 3/4 3/32 25
519-012 R-12 5/8 13/16 3/32 25
519-013 R-13 11/16 7/8 3/32 25
519-014 R-14 3/4 15/16 3/32 25
519-015 R-15 3/4 1 1/8 25
519-016 R-16 13/16 1.1/16 1/8 25
519-017 R-17 7/8 1.1/8 1/8 25
519-018 R-18 15/16 1.3/16 1/8 25
519-019 R-19 1 1.1/4 1/8 25
519-020 R-20 1.1/16 1.5/16 1/8 25
519-021 R-21 1.1/8 1.3/8 1/8 25
519-022 R-22 1.3/16 1.7/16 1/8 25
519-023 R-23 1.1/4 1.1/2 1/8 25
519-024 R-24 1.5/16 1.9/16 1/8 25
519-025 R-25 1.3/8 1.5/8 1/8 25
519-026 R-26 1.7/16 1.11/16 1/8 25
519-027 R-27 1.1/2 1.3/4 1/8 25
519-028 R-28 1.1/2 1.7/8 3/16 25
519-029 R-29 1.5/8 2 3/16 25
519-030 R-30 1.3/4 2.1/8 3/16 25
519-070 R-7A 1/2 5/8 1/16 25
519-140 R-14A 13/16 1 3/32 25
519-141 R-14B 7/8 1.1/16 3/32 25
519-270 R-27A 1.5/8 1.7/8 1/8 25
519-271 R-27B 1.3/4 2 1/8 25
519-272 R-27C 1.7/8 2.1/8 1/8 25
519-273 R-27D 2 2.1/4 1/8 25
STANDARD O-RINGS
519-308
Product Code Size (mm) Qty Product
Code Size (mm) Qty
519-145 3 x 2 20 519-161 22 x 2.5 14
519-146 5 x 2 20 519-162 22 x 3.5 10
519-147 6 x 2 18 519-163 23 x 3.5 10
519-148 8 x 2 18 519-164 25 x 3.5 10
519-149 10 x 2 18 519-165 27 x 3.5 10
519-150 10 x 2.5 14 519-166 28 x 3.5 10
519-151 12 x 2.5 14 519-167 30 x 3.5 10
519-152 13 x 2 18 519-168 31 x 3.5 10
519-153 14 x 2.5 14 519-169 32 x 3.5 10
519-154 15 x 2.5 14 519-170 34 x 3.5 10
519-155 16 x 2.5 14 519-171 36 x 3.5 10
519-156 18 x 2.5 14 519-172 38 x 3.5 10
519-157 18 x 3.5 10 519-173 41 x 3.5 10
519-158 20 x 2.5 14 519-174 44 x 3.5 10
519-159 20 x 3.5 10 519-175 46 x 3.5 10
519-160 21 x 2.5 14 519-176 50 x 3.5 10
519-312
Product
Code
Part
Number
Tube
O.D.
(Ref.)
QtyProduct
Code
Part
Number
Tube
O.D.
(Ref.)
Qty
519-180 901 3/32 10 519-190 911 11/16 10
519-181 902 1/8 10 519-191 912 3/4 10
519-182 903 3/16 10 519-192 913 13/16 10
519-183 904 1/4 10 519-193 914 7/8 10
519-184 905 5/16 12 519-194 916 1 10
519-185 906 3/8 12 519-195 918 1 1/8 10
519-186 907 7/16 12 519-196 920 1 1/4 10
519-187 908 1/2 12 519-197 924 1 1/2 10
519-188 909 9/16 12 519-198 928 1 3/4 10
519-189 910 5/8 12 519-199 932 2 10
See O-Rings chart on pg. I-1 & I-2
AUTOMOTIVE
www.docap.com13 TORONTO (HEAD OFFICE)
6601 Goreway Dr. Unit B • Mississauga ON
T: 905.673.0000 F: 905.673.1333
Toll Free: 1.800.268.6955
MONTREAL900 Montee de Liesse • St. Laurent QC
T: 514.344.3536 F: 514.344.1020
Toll Free: 1.800.361.0297
EDMONTON11716-170th St. • Edmonton AB
T: 780.453.5895 F: 780.454.9302
Toll Free: 1.800.661.1909
CALGARY4311 122nd Ave. S.E. • Calgary AB
F: 780.454.9302 Toll Free: 1.800.661.1909
Contents:
• 1 Razor Blade
• 1 Adhesive Tube
• 1 Splicing & Cutting Jig
• 9 Pieces O-Ring Cords (3’ each)
Product Code Description Pkg Qty
519-400 Metric O-Ring Splicing Kit 1
METRIC O-RING SPLICING KIT
• BUNA-N-BG715
METRIC O-RINGS
Product Code ID (mm) Nominal SizeOD (mm) Thick Pkg Qty
519-145 3 7 2 25
519-146 5 9 2 25
519-147 6 10 2 25
519-148 8 12 2 25
519-149 10 14 2 25
519-150 10 15 2.5 25
519-151 12 17 2.5 25
519-152 13 17 2 25
519-153 14 19 2.5 25
519-154 15 20 2.5 25
519-155 16 21 2.5 25
519-156 18 23 2.5 25
519-157 18 25 3.5 25
519-158 20 25 2.5 25
519-159 20 27 3.5 25
519-160 21 26 2.5 25
519-161 22 27 2.5 25
519-162 22 29 3.5 25
519-163 23 30 3.5 25
519-164 25 32 3.5 25
519-165 27 34 3.5 25
519-166 28 35 3.5 25
519-167 30 37 3.5 25
519-168 31 38 3.5 25
519-169 32 39 3.5 25
519-170 34 41 3.5 25
519-171 36 43 3.5 25
519-172 38 45 3.5 25
519-173 41 48 3.5 25
519-174 44 51 3.5 25
519-175 46 53 3.5 25
519-176 50 57 3.5 25
• BUNA-N-BG915
• High Pressure O-Rings meet ASTM D2000, SAE J200, AS568 Standards
HIGH PRESSURE O-RINGS
• Made from SBR (Styrene Butadiene Rubber)
• Inserted within the holse of sheet metal
• Provides protection against rough edges
• RBG grommets can be used as plugs
GROMMETS
GROMMET ASSORTMENT
O - RINGS (CONT)
519-500
Product Code
Part Number Qty Product
CodePart
Number Qty
519-501 EWG-1 20 519-544 EWG-44 5
519-506 EWG-6 15 519-545 EWG-45 3
519-513 EWG-13 10 519-601 RBG-1 30
519-521 EWG-21 5 519-602 RBG-2 25
519-526 EWG-26 10 519-603 RBG-3 15
519-527 EWG-27 10 519-604 RBG-4 10
519-531 EWG-31 5 519-605 RBG-5 7
519-534 EWG-34 5 519-606 RBG-6 5
519-536 EWG-36 8 519-607 RBG-7 4
• Contains over 190 pieces
• 18 popular sizes
• Packed in plastic see through box
• Sizes are listed in the Grommets table
Product Code
IndustryPart Number ID Nominal Size
OD Thick Pkg Qty
519-180 901 3/32” 3/16” .047” 25
519-181 902 1/8” 1/4” .063” 25
519-182 903 3/16” 5/16” .063” 25
519-183 904 1/4” 3/8” .063” 25
519-184 905 5/16” 7/16” .063” 25
519-185 906 3/8” 1/2” .063” 25
519-186 907 7/16” 9/16” .063” 25
519-187 908 1/2” 5/8” .063” 25
519-188 909 9/16” 11/16” .063” 25
519-189 910 5/8” 3/4” .063” 25
519-190 911 11/16” 7/8” .094” 25
519-191 912 3/4” 15/16” .094” 25
519-192 913 13/16” 1” .094” 25
519-193 914 7/8” 1.1/16” .125” 25
519-194 916 1” 1.3/16” .125” 25
519-195 918 1.1/8” 1.3/8” .125” 25
519-196 920 1.1/4” 1.1/2” .125” 25
519-197 924 1.1/2” 1.3/4” .125” 25
519-198 928 1.3/4” 2.1/8” .188” 25
519-199 932 2 2.5/16” .156” 25
AUTOMOTIVE
14www.docap.com
TORONTO (HEAD OFFICE)6601 Goreway Dr. Unit B • Mississauga ON
T: 905.673.0000 F: 905.673.1333
Toll Free: 1.800.268.6955
MONTREAL900 Montee de Liesse • St. Laurent QC
T: 514.344.3536 F: 514.344.1020
Toll Free: 1.800.361.0297
EDMONTON11716-170th St. • Edmonton AB
T: 780.453.5895 F: 780.454.9302
Toll Free: 1.800.661.1909
CALGARY4311 122nd Ave. S.E. • Calgary AB
F: 780.454.9302 Toll Free: 1.800.661.1909
• Neoprene, one
braid construction
and meets S.A.E.
Specifications
Product Code
Part Number
Hose I.D. x Length
Working Pressure
Bursting Pressure
Pkg Qty
25062 G414 1/4” X 25’ 50 p.s.i. 250 p.s.i. 1
25080 G516 5/16” X 25’ 50 p.s.i. 250 p.s.i. 1
25090 G438 3/8” X 25’ 50 p.s.i. 250 p.s.i. 1
FUEL LINE HOSE
Product Code Part Number Pkg Qty
520-50 H58 50
520-100 H108 100
• Neoprene Rubber
DRIVEWAY SIGNAL HOSE
Product Code Part No Description Pkg Qty
642-110 10G Signal Gong 1
642-118 Repair Kit for Signal Gong 1
DRIVEWAY SIGNAL GONG
GROMMETS (CONT)
GROMMETS
Product Code
Part Number I.D. (in) O.D. (in) Pkg Qty
519-501 EWG-1 1/8 9/32 25
519-506 EWG-6 3/16 5/16 25
519-513 EWG-13 1/4 1/2 25
519-521 EWG-21 5/16 7/32 25
519-526 EWG-26 3/8 1/2 25
519-527 EWG-27 3/8 9/16 25
519-531 EWG-31 3/8 3/4 25
519-534 EWG-34 7/16 3/4 25
519-536 EWG-36 1/2 21/32 25
519-544 EWG-44 5/8 1 10
519-545 EWG-45 3/4 15/16 10
519-601 RBG-1 — 5/16 25
519-602 RBG-2 — 3/8 25
519-603 RBG-3 — 1/2 25
519-604 RBG-4 — 5/8 25
519-605 RBG-5 — 3/4 25
519-606 RBG-6 — 7/8 10
519-607 RBG-7 — 1 10
See Grommets chart on pg. I-3
• 115 volts - 60 cycle AC
• Crystal clear 6” diameter fire house bell incorporates new design vibrating
solenoid with stainless steel plunger in brass tube
• Works with up to 300’ of 3/8” hose.
AUTOMOTIVE
www.docap.com15 TORONTO (HEAD OFFICE)
6601 Goreway Dr. Unit B • Mississauga ON
T: 905.673.0000 F: 905.673.1333
Toll Free: 1.800.268.6955
MONTREAL900 Montee de Liesse • St. Laurent QC
T: 514.344.3536 F: 514.344.1020
Toll Free: 1.800.361.0297
EDMONTON11716-170th St. • Edmonton AB
T: 780.453.5895 F: 780.454.9302
Toll Free: 1.800.661.1909
CALGARY4311 122nd Ave. S.E. • Calgary AB
F: 780.454.9302 Toll Free: 1.800.661.1909
Product Code Bolt Size O.D.
(In)I.D. (In)
Thick-ness Qty
BOXED
452-009 3/16 3/4 13/64 3/64 Pkg 100
452-011 3/16 1 13/64 3/64 Pkg 100
452-013 1/4 1.1/4 9/32 1/16 Pkg 100
452-014 5/16A 1 11/32 1/16 Pkg 100
452-015 5/16B 1.1/4 11/32 1/16 Pkg 100
452-016 5/16C 1.1/2 11/32 1/16 Pkg 100
452-017 3/8 1.1/2 13/32 1/16 Pkg 100
452-019 1/2 2 17/32 1/16 Pkg 100
BULK
452-009K 3/16 3/4 13/64 3/64 Approx 7462
452-011K 3/16 1 13/64 3/64 Approx 4080
452-013K 1/4 1.1/4 9/32 1/16 Approx 1943
452-014K 5/16A 1 11/32 1/16 Approx 3282
452-015K 5/16B 1.1/4 11/32 1/16 Approx 2128
452-016K 5/16C 1.1/2 11/32 1/16 Approx 1482
452-017K 3/8 1.1/2 13/32 1/16 Approx 1652
452-019K 1/2 2 17/32 1/16 Approx 682
• Used primarily for body and fender work
• Zinc plated
FLAT FENDER WASHERS
Product
CodePart No.
Internal
Thread
External
ThreadLength
Tap Drill
Size
Min. Full
Thread
Dept.
Pkg
Qty
COARSE THREAD 10 TO 7/16”
458-003 329-3 10-24 3/8-16 .406 5/16 15/32 10
458-004 329-4 1/4-20 7/16-14 .437 23/64 1/2 10
458-005 329-5 5/16-18 1/2-13 .484 27/64 9/16 10
458-006 329-6 3/8-16 9/16-12 .515 31/64 19/32 10
458-007 329-7 7/16-14 5/8-11 .656 17/64 23/32 5
COARSE THREAD 1/2 TO 1”
458-008 329-8 1/2-13 3/4-10 .656 21/32 3/4 5
458-010 329-10 5/8-11 7/8-9 .687 49-64 13/16 5
458-012 329-12 3/4-10 1/8 .781 7/8 7/8 5
458-016 329-16 1-8 1.3/8-12 1.250 1.9/32 1.3/8 5
FINE THREAD 10 TO 7/16”
458-020 329-332 10-32 3/8-16 .406 5/16 15/32 10
458-022 329-428 1/4-28 7/16-14 .437 23/64 1/2 10
458-024 329-524 5/16-24 1/2-13 .484 27/64 9/16 10
458-026 329-624 3/8-24 9/16-12 .515 31/64 19/32 10
458-028 329-720 7/16-20 5/8-11 .656 17/32 23/32 5
METRIC THREAD 6MM TO 12MM”
458-036 650-6 M6-1.0 3/8-16 .406 5/16 15/32 10
458-038 650-8 M8-1.25 1/2-13 .484 27/64 9/16 10
458-040 650-10 M10-1.50 9/16-12 .515 31/64 19/32 10
458-042 650-12 M12.1.75 3/4-10 .656 21/32 3/4 5
SPARK PLUG SIZES
458-046 329-1406M14 x 3/8”
reach3/4-16 .328 11/16 3/4-16 5
458-048 329-1408M14 x 1/2”
reach3/4-16 .453 11/16 3/4-16 5
458-052 329-1412M14 x 3/4”
reach3/4-16 .703 11/16 3/4-16 5
458-058 329-1808M18 x 1/2”
reach1-12 .453 59/64 1-12 5
• Prevent/repair stripped threads
• No special tools required
• Install with olt and wrench
E-Z • LOK THREAD INSERTS
E-Z • LOK REPAIR KIT
Product Code Part No. Description
458-080 ELK - 101 48 Asst. Pieces
458-081** ELK - 103 22 Asst. Pieces
458-083 ELK - 107 29 Asst. Pieces
LICENSE PLATE BOLTS
Product Code Part No. Size (in) Package Qty
460-017 LP-20 1/4-20 x 5/8 100
• Complete assembly of truss head screws, lock
washers and nuts
• All items plated
** Display Box not included
AUTOMOTIVE
16www.docap.com
TORONTO (HEAD OFFICE)6601 Goreway Dr. Unit B • Mississauga ON
T: 905.673.0000 F: 905.673.1333
Toll Free: 1.800.268.6955
MONTREAL900 Montee de Liesse • St. Laurent QC
T: 514.344.3536 F: 514.344.1020
Toll Free: 1.800.361.0297
EDMONTON11716-170th St. • Edmonton AB
T: 780.453.5895 F: 780.454.9302
Toll Free: 1.800.661.1909
CALGARY4311 122nd Ave. S.E. • Calgary AB
F: 780.454.9302 Toll Free: 1.800.661.1909
DISCONNECTING TYPE SS
DISCONNECTING TYPE P
FLAT TOP SPG TYPE
THROTTLE BALL JOINTS
SPRING LOADED TYPE A Type A Ball Joints are spring loaded S.A.E. design used widely for throttle control
and other applications where zero end-play is required and tension due to spring
compression is not objectionable. Fully conform with S.A.E., G.M.C and other
published standards including the additional advantages of case hardened seats
and ball studs for extra wear resistance, plus plating for maximum corrosion
resistance.
Materials of construction - Made of C12L14 carbon steel. Seat members are
made of C1008 steel. Both ball stud and seat members are Carbonitride case
hardened to a depth of .005 to .008. Assemblies are plated and clear dichromate
treated for extra corrosion resistance.
Type P Ball are a low cost disconnect design for throttle and governor controls
where minimum weight is required. Length adjustments are simplified because
of the disconnect feature. All sizes have a ball stud ball diameter of .252” and a
ball stud neck diameter of .140”. The hardened spring steel retaining clip accepts
ball stud member at 19 pounds maximum push-in load and permits removal of
ball stud with 14 pounds minimum pull-out load.
Type SPG Ball Joints are designed for heavy duty service. This is a high-strength
design with good wear resistance. An oil and ozone resistant Buna-N rubber dirt
shield provides protection against abrasive dirt.
“Flat Top” alignment guide shown in drawings above is designed for standard
wrench sizes. Provides a mechanical and visual aid which makes it easy to align
the ball stud in its vertical position for maximum movement in all directions.
Pull out and tensile strength - A new method of assembly swages more
than twice the amount of metal to retain the ball in the cavity. This results in
tremedously increased pull out and wear resistance.
Type SS ball joints are high strength, quick disconnect assemblies with good wear
characteristics . Patented design features “key hole” retaining sleeve which insures
that the assembly can only be put together with the sleeve positively aligned
with the ball cavity. When the spring is released, alignment is automatic, thereby
eliminating any possibility of partial closure.
Material of Construction: Body and ball stud are of low carbon steel. Ball studs
are surface hardened for wear resistance. All components except the stainless
steel spring are plated and yellow dichromate treated for corrosion resistance.
Lubrication: Ball cavity is packed with high wear lubricant.
Part Number
Product Code
Pkg Qty
G.M.C.Plain
G.M.C.Plated A B C D E F G H J K
A1002 472-102 5 109400 192227 1/4-28 15/32 9/16 1/8 7/16 3/8 31/32 1/2 1.3/8 0.151
A1003 472-103 5 109401 426310 5/16-24 17/32 11/16 5/32 1/2 7/16 1.1/8 9/16 1.9/16 0.182
Part Number Product Code Pkg Qty A C G H J M
P1002 472-107 5 1/4-28 9/16 31/32 1/2 1.3/8 0.151
Part Number
Product Code Description Pkg
QtyThread
Size B C D E F G H J K LTensile
Strength(Pounds)
P1003 472-108 Quick Disconnecting Type
SS Throttle Ball Joint5 5/16-24 17/32 11/16 5/32 5/8 7/16 1.1/8 19/32 1.29/64 .221 .403 560
Part Number
Product Code
Pkg Qty A B C D E Wrench
Size F G H J K L
SPG1000 472-110 5 10-32 7/16 7/16 1/8 3/8 5/16 5/16 7/8 15/32 1.5/32 0.177 0.301
SPG1002 472-112 5 1/4-28 15/32 9/16 1/8 7/16 3/8 3/8 31/32 17/32 1.5/16 0.208 0.347
SPG1003 472-113 5 5/16-24 17/32 11/16 5/32 1/2 7/16 7/16 1.1/8 19/32 1.9/16 0.250 0.405
SPG1004 472-114 5 3/8-24 11/16 7/8 3/16 9/16 9/16 1/2 1.3/8 13/16 1.13/16 0.289 0.493
SPG1005 472-115 5 7/16-20 7/8 1.1/8 1/4 11/16 11/16 5/8 1.15/16 1.1/8 2.1/2 0.375 0.618
SPG1006 472-116 5 1/2-20 7/8 1.1/8 1/4 11/16 11/16 5/8 1.15/16 1.1/8 2.1/2 0.375 0.618
AUTOMOTIVE
www.docap.com17 TORONTO (HEAD OFFICE)
6601 Goreway Dr. Unit B • Mississauga ON
T: 905.673.0000 F: 905.673.1333
Toll Free: 1.800.268.6955
MONTREAL900 Montee de Liesse • St. Laurent QC
T: 514.344.3536 F: 514.344.1020
Toll Free: 1.800.361.0297
EDMONTON11716-170th St. • Edmonton AB
T: 780.453.5895 F: 780.454.9302
Toll Free: 1.800.661.1909
CALGARY4311 122nd Ave. S.E. • Calgary AB
F: 780.454.9302 Toll Free: 1.800.661.1909
Product Code Description Pkg Qty
612-150 Heavy Duty Commercial Lead
Battery Terminal1
TOP APPLICATION - HEAVY DUTY
SIDE TERMINAL ADAPTERS
• Antimonial reinforced lead terminal
• Resists acid corrosion and can survive hostile industrial environments
• Hold down plate fits cable for 1 ga. to 4/0
Product Code Description Pkg Qty
612-170 2 pcs per card 1
• Converts top post batteries to side terminal applications
• Die cast of antimonial lead for corrosion resistance
• Side terminal cables bolt directly to adapter
SIDE TERMINAL CONVERSION POSTS
Product Code Description Pkg Qty
612-190 Side Terminal Charging Post
- 2 pcs per card1
• Replace OEM bolts and provides a convenient, permanent means of
clamping on booster cables
• Screw on lead posts for charging or testing batteries
BATTERY TERMINALS
• Twin bolt solderless type terminal
• For use with side terminal batteries
• Complete with mounting stud
Product Code Part Number Description Pkg Qty
612-102 STL-2Heavy Duty Replacement Side
Terminal -2pcs per card1
612-109 STL-10Heavy Duty Replacement Side
Terminal -10 pcs per card1
SIDE APPLICATION
• Twin bolt solderless type terminal
• Universal cable range 8 through 2/0
TOP APPLICATION
Product Code Part Number
Description Pkg Qty
612-132 888-2Heavy Duty Universal Lead Battery
Terminal - 2 pcs per card1
612-140 CD888LHeavy Duty Universal Lead Battery
Terminal - 10 pcs per card1
STUD TO POST CONVERSION SET
Product Code Description Pkg Qty
612-191 Stud to post conversion posts
- 2 pcs per card1
• Converts threaded stud terminal to standard S.A.E. post
AUTOMOTIVE
18www.docap.com
TORONTO (HEAD OFFICE)6601 Goreway Dr. Unit B • Mississauga ON
T: 905.673.0000 F: 905.673.1333
Toll Free: 1.800.268.6955
MONTREAL900 Montee de Liesse • St. Laurent QC
T: 514.344.3536 F: 514.344.1020
Toll Free: 1.800.361.0297
EDMONTON11716-170th St. • Edmonton AB
T: 780.453.5895 F: 780.454.9302
Toll Free: 1.800.661.1909
CALGARY4311 122nd Ave. S.E. • Calgary AB
F: 780.454.9302 Toll Free: 1.800.661.1909
Product Code Description Pkg Qty
612-192 Clamp Type Wing Nut Lead
Terminal - 2 pcs per card1
• Quick disconnect
• Lead terminal, brass wing nut
• Both positive and negative
MARINE TERMINALS
BATTERY HOLD DOWN
NON-ADJUSTABLE BATTERY HOLD DOWN
• Foreign car cross bar type
• Fits battery groups 22F, 24, 27, 60, 71, 72, 74, 77
Product Code Description Pkg Qty
613-112 Non-Adjustable Battery Hold Down 1
• 1/4” – 20 thread hold down bolt
• 4 thread
Product Code Description Pkg Qty
613-113 12” “J” Style battery hold down bolts
- 2 pcs per card1
613-114 10” “L” Style battery hold down bolts
- 2pcs per card1
BATTERY HOLD DOWN BOLTS
PLASTIC BATTERY HOLD DOWN
RUBBER CLAMPS – BATTERY HOLD DOWN
• 7” Non-adjustable
• Fits battery groups 22F, 24, 27, 60, 71, 72, 74, 77
• Fits battery groups 22F, 24, 27, 60, 71, 72, 74, 77
Product Code Description Pkg Qty
613-116 Plastic Battery Hold Down 1
Product Code Description Pkg Qty
613-117 Universal battery hold down rubber clamps 1
BATTERY TERMINALS (CONT)
• Made from chemically treated polyester cotton
TERMINAL PROTECTORS
Product Code Description Pkg Qty
613-120 Universal battery terminal
protectors - 2 pcs per card1
AUTOMOTIVE
www.docap.com19 TORONTO (HEAD OFFICE)
6601 Goreway Dr. Unit B • Mississauga ON
T: 905.673.0000 F: 905.673.1333
Toll Free: 1.800.268.6955
MONTREAL900 Montee de Liesse • St. Laurent QC
T: 514.344.3536 F: 514.344.1020
Toll Free: 1.800.361.0297
EDMONTON11716-170th St. • Edmonton AB
T: 780.453.5895 F: 780.454.9302
Toll Free: 1.800.661.1909
CALGARY4311 122nd Ave. S.E. • Calgary AB
F: 780.454.9302 Toll Free: 1.800.661.1909
• Cleans battery posts and terminals
• Plastic case
• Use bottom brush for cleaning terminals
• Unscrew top and use inside brush for cleaning cables
BATTERY BRUSH
• Reversible 5/16” ratcheting box wrench
SIDE TERMINAL BATTERY WRENCH
Product Code Description Pkg Qty
613-122 Plastic Case Battery Brush 1
Product Code Description Pkg Qty
613-123 Side Terminal Battery Wrench 1
• Shaves off rust and corrosion
POST AND TERMINAL CLEANER
Product Code Description Pkg Qty
613-121 Professional 4 way battery post and terminal
center1
• Jaws spread 2.1/2”
• 2” deep
• Use for pulling small gears, pulleys
and bearings
• Excellent tool for removing worn
terminal leads from battery
BATTERY TERMINAL LIFTER
REPLACEMENT SIDE TERMINAL BOLTS
Product Code Description Pkg Qty
613-130 Steel battery terminal lifter 1
Product Code Description Pkg Qty
613-129 Terminal protector caps - 2 pcs per card 1
• Fits positive and negative posts
Product Code Description Pkg Qty
613-126 3/8” Replacement side
terminal bolt - 2 pcs per card1
613-127 3/8” x 1/2” Replacement side
terminal bolt - 2 pcs per card1
BATTERY POST SHIMS
Product Code Description Pkg Qty
613-128 2 pcs per card 1
PROTECTOR CAPS
• Made of plastic
• Fit both positive and negative post
AUTOMOTIVE
20www.docap.com
TORONTO (HEAD OFFICE)6601 Goreway Dr. Unit B • Mississauga ON
T: 905.673.0000 F: 905.673.1333
Toll Free: 1.800.268.6955
MONTREAL900 Montee de Liesse • St. Laurent QC
T: 514.344.3536 F: 514.344.1020
Toll Free: 1.800.361.0297
EDMONTON11716-170th St. • Edmonton AB
T: 780.453.5895 F: 780.454.9302
Toll Free: 1.800.661.1909
CALGARY4311 122nd Ave. S.E. • Calgary AB
F: 780.454.9302 Toll Free: 1.800.661.1909
BATTERY CLIPS WITH VINYL BOOT
Product Code Description Pkg Qty
613-141 10 Amp 1
613-142 20 Amp 1
613-143 30 Amp 1
BATTERY CLIPS
Product Code Description Pkg Qty
613-144 10 Amp 1
613-145 15 Amp 1
STEEL BATTERY CLAMPS
BATTERY CLIPS WITH VINYL HANDLES
Product Code Description Pkg Qty
613-146 400 Amp 1
613-147 600 Amp 1
613-148 300 Amp 1
• Automatically locks the ends onto the posts for easy carrying
BATTERY CARRIERS
• Fits positive and negative posts
• Made from steel plate
BATTERY BOLTS
• Ideal for replacing rusted or
acid corroded platforms
• Acid resistant vinyl coated steel
• To prevent battery movement
use with Hold down bolts
Product Code Description Pkg Qty
613-135 Small (7.1/4” x 10.3/4”) 1
613-136 Large (7.1/4” x 13.1/8”) 1
REPLACEMENT BATTERY TRAYS
Product Code Description Pkg Qty
613-131 Top terminal battery carrier strap 1
Product Code Description Pkg Qty
613-133 2 pcs per card 1
• Acid resistant
• 6” flexible spout
• 6oz. capacity bulb
• Multi-purpose
• Will not crack in cold weather
Product Code Description Pkg Qty
613-137 Battery Filler 1
BATTERY FILLER
AUTOMOTIVE
www.docap.com21 TORONTO (HEAD OFFICE)
6601 Goreway Dr. Unit B • Mississauga ON
T: 905.673.0000 F: 905.673.1333
Toll Free: 1.800.268.6955
MONTREAL900 Montee de Liesse • St. Laurent QC
T: 514.344.3536 F: 514.344.1020
Toll Free: 1.800.361.0297
EDMONTON11716-170th St. • Edmonton AB
T: 780.453.5895 F: 780.454.9302
Toll Free: 1.800.661.1909
CALGARY4311 122nd Ave. S.E. • Calgary AB
F: 780.454.9302 Toll Free: 1.800.661.1909
• 4 Gauge
BATTERY CABLES
TOP TERMINAL BATTERY TO SWITCH
Product Code Description Pkg Qty
614-109 9” 1
614-112 12” 1
614-115 15” 1
614-119 19” 1
614-124 24” 1
614-127 27” 1
614-130 30” 1
614-137 37” 1
614-142 40” 1
614-148 48” 1
614-158 58” 1
TOP TERMINAL BATTERY TO SWITCH WITH TERMINAL LEAD
Product Code Description Pkg Qty
614-217 17” 1
614-222 22” 1
614-227 27” 1
• 4 Gauge
TOP TERMINAL BATTERY TO SWITCH
• 1 Gauge
Product Code Description Pkg Qty
614-312 12” 1
614-316 16” 1
614-320 20” 1
614-327 27” 1
614-334 34” 1
614-341 41” 1
614-348 48” 1
614-358 58” 1
SIDE TERMINAL BATTERY TO SWITCH
• 4 Gauge
Product Code Description Pkg Qty
614-420 20” 1
614-430 30” 1
614-435 35” 1
614-445 45” 1
SWITCH TO STARTER
Product Code Description Gauge Pkg Qty
614-515 15” 1 1
614-516 15” 4 1
614-518 18” 4 1
614-524 24” 4 1
614-530 30” 4 1
614-536 36” 4 1
614-540 40” 4 1
614-548 45” 4 1
BATTERY TO BATTERY
Product Code Description Pkg Qty
614-608 7” 1
614-612 12” 1
• 1 Gauge
AUTOMOTIVE
22www.docap.com
TORONTO (HEAD OFFICE)6601 Goreway Dr. Unit B • Mississauga ON
T: 905.673.0000 F: 905.673.1333
Toll Free: 1.800.268.6955
MONTREAL900 Montee de Liesse • St. Laurent QC
T: 514.344.3536 F: 514.344.1020
Toll Free: 1.800.361.0297
EDMONTON11716-170th St. • Edmonton AB
T: 780.453.5895 F: 780.454.9302
Toll Free: 1.800.661.1909
CALGARY4311 122nd Ave. S.E. • Calgary AB
F: 780.454.9302 Toll Free: 1.800.661.1909
• Reveals battery charge instantly and accurately
– hot or cold
• Detects over – charge
• Tests 6, 12 and 24 volt system
Product Code Description Pkg Qty
613-150 Battery Tester 1
TESTERS
BATTERY TESTER
• Accurately tests all permanent solutions
with radiator hot or cold
Product Code Description Pkg Qty
613-151 Anti-Freeze Tester 1
ANTI-FREEZE TESTER
GREASE GUNS & ACCESSORIES
FLEXIBLE HOSE
Product Code Description Pkg Qty
638-020 12” Flexible Hose 1
638-022 18” Flexible Hose 1
• Working pressure at 4500 psi
• Rubber with wire braids
• 1/8” x 27 NPT thread
• Made of carbon steel
• Zinc plated
• 1/8” x 27 NPT thread
GREASE GUN COUPLER
Product Code Description Pkg Qty
638-025 Grease Gun Coupler 1
• Multi-loading system (cartridge,
bulk or filler pump)
PISTOL TYPE GREASE GUN
Product Code Description Pkg Qty
638-012 Pistol Lever Type Grease Gun 1
WHEEL WRENCHES
Product Code
Part No Description Socket
SizesOverall Length
Pkg Qty
643-307 307
CAR OWNER MODEL - same
as model 310 with shorter
length arms for general car
owner use
3/4”, 3/4”,
13/16”, 7/8”14.3/4” 1
643-310 310
GENERAL PURPOSE - the ideal
wrench for general purpose
use by the service station
operator
3/4”, 3/4”,
13/16”, 7/8”17.1/2” 1
643-320 320
LONG REACH MODEL - 20”
overall length, well suited for
clearing fender skirts on late
model cars
3/4”, 11/16”,
13/16”, 7/8”20” 1
643-321 321PICK-UP TRUCK MODEL - fits
new 1/2 ton trucks
3/4”, 13/16”,
7/8”, 15/16”20” 1
AUTOMOTIVE
www.docap.com23 TORONTO (HEAD OFFICE)
6601 Goreway Dr. Unit B • Mississauga ON
T: 905.673.0000 F: 905.673.1333
Toll Free: 1.800.268.6955
MONTREAL900 Montee de Liesse • St. Laurent QC
T: 514.344.3536 F: 514.344.1020
Toll Free: 1.800.361.0297
EDMONTON11716-170th St. • Edmonton AB
T: 780.453.5895 F: 780.454.9302
Toll Free: 1.800.661.1909
CALGARY4311 122nd Ave. S.E. • Calgary AB
F: 780.454.9302 Toll Free: 1.800.661.1909
Part Number Description Case Qty
METAL
AP-610 10” AutoTeX PINK Metal Wiper Blade 6
AP-611 11” AutoTeX PINK Metal Wiper Blade 6
AP-613 13” AutoTeX PINK Metal Wiper Blade 6
AP-614 14” AutoTeX PINK Metal Wiper Blade 6
AP-615 15” AutoTeX PINK Metal Wiper Blade 6
AP-616 16” AutoTeX PINK Metal Wiper Blade 6
AP-617 17” AutoTeX PINK Metal Wiper Blade 6
AP-618 18” AutoTeX PINK Metal Wiper Blade 6
AP-619 19” AutoTeX PINK Metal Wiper Blade 6
AP-620 20” AutoTeX PINK Metal Wiper Blade 6
AP-621 21” AutoTeX PINK Metal Wiper Blade 6
AP-622 22” AutoTeX PINK Metal Wiper Blade 6
AP-624 24” AutoTeX PINK Metal Wiper Blade 6
AP-626 26” AutoTeX PINK Metal Wiper Blade 6
AP-628 28” AutoTeX PINK Metal Wiper Blade 6
FRAMELESS
AP-015 15” AutoTeX PINK Metal Wiper Blade 6
AP-016 16” AutoTeX PINK Metal Wiper Blade 6
AP-017 17” AutoTeX PINK Metal Wiper Blade 6
AP-018 18” AutoTeX PINK Metal Wiper Blade 6
AP-019 19” AutoTeX PINK Metal Wiper Blade 6
AP-020 20” AutoTeX PINK Metal Wiper Blade 6
AP-021 21” AutoTeX PINK Metal Wiper Blade 6
AP-022 22” AutoTeX PINK Metal Wiper Blade 6
AP-024 24” AutoTeX PINK Metal Wiper Blade 6
AP-026 26” AutoTeX PINK Metal Wiper Blade 6
AP-028 28” AutoTeX PINK Metal Wiper Blade 6
SPECIAL ORDER
AP60214 prong rack, header card, application guide, bay banner, tri-folder
holder, includes 84 blades mix, (50) tri-folds, (42) thank you cards,
(42) thank you card envelopes
1
AP6057 prong rack, header card, application guide, tri-folder holder, (50)
tri-folds, includes 42 blades mix, (20) thank you cards, (20) thank you
card envelopes
1
AUTOTEX PINK WIPER BLADES
AUTOMOTIVE
24www.docap.com
TORONTO (HEAD OFFICE)6601 Goreway Dr. Unit B • Mississauga ON
T: 905.673.0000 F: 905.673.1333
Toll Free: 1.800.268.6955
MONTREAL900 Montee de Liesse • St. Laurent QC
T: 514.344.3536 F: 514.344.1020
Toll Free: 1.800.361.0297
EDMONTON11716-170th St. • Edmonton AB
T: 780.453.5895 F: 780.454.9302
Toll Free: 1.800.661.1909
CALGARY4311 122nd Ave. S.E. • Calgary AB
F: 780.454.9302 Toll Free: 1.800.661.1909
Product Code Description Equivalent
to Amflo # Pkg Qty
646-100 For 0.453” Rim Holes TR413
-1.1/4” effective length30-413-50 50
646-101 For 0.453” Rim Holes TR413
-1.1/4” effective length30-413-50 500
646-102 For 0.453” Rim Holes TR414
-1.1/2” effective length30-414-50 50
646-104 For 0.625” Rime Holes TR415
-1.1/4” effective length30-415-50 50
646-106 For 0.453” Rim Hole TR418
-2” effective length 30-418-50 50
646-107 For 0.453” Rim Holes TR418
-2” effective length30-418-50 500
VALVE HARDWARE
SNAP-IN VALVES
• Sold in box quantities
VALVE CAPS
• 250 pieces per box
• Sold in box quantities
Product Code Description Equivalent
to Amflo #
646-112 Plastic valve caps TR VC-8 38-505-250
646-114 Nickel plated core extractor caps TR VC-2 38-600-250
646-116 High heat hex caps 38-712-250
646-118 High heat dome cap TR VC-3 38-772-250
VALVE CORES
• 250 pieces per box
• Sold in box quantities
Product Code Description Eqivalent to Amfo #
646-120 Standard TR C-1 38-790-250
Product Code Description Pkg Qty
646-238 1/4” Female NPT 1
AIR ACCESSORIES
DUAL FOOT AIR CHUCK
• Working pressure: 90 psi
• Bursting pressure: 225 psi
PRESSURE GUN DIAL INFLATOR WITH CLIP-ON CHUCK
• 1/4” female NPT
• Braided polyurethane hose
• Working pressure: 90 psi
• Bursting pressure: 225 psi
Product Code Description Pkg Qty
646-240 Pressure gun dial inflator with
clip-on chuck1
AUTOMOTIVE
www.docap.com25 TORONTO (HEAD OFFICE)
6601 Goreway Dr. Unit B • Mississauga ON
T: 905.673.0000 F: 905.673.1333
Toll Free: 1.800.268.6955
MONTREAL900 Montee de Liesse • St. Laurent QC
T: 514.344.3536 F: 514.344.1020
Toll Free: 1.800.361.0297
EDMONTON11716-170th St. • Edmonton AB
T: 780.453.5895 F: 780.454.9302
Toll Free: 1.800.661.1909
CALGARY4311 122nd Ave. S.E. • Calgary AB
F: 780.454.9302 Toll Free: 1.800.661.1909
SPRAY GUN AND SIPHON
• 1/4” x 8 m
• 1/4” male NPT
• Made of polyurethane
• Working pressure: 200 psi
• Bursting pressure: 500 psi
Product Code Description Pkg Qty
646-250 Spray Gun 1
• 1/4” female NPT
• 5’ rubber hose
• Working pressure: 90 psi
• Bursting pressure: 225 psi
PLASTIC HOSE REEL
Product Code Description Pkg Qty
646-260 Plastic Hose Reel 1
Product Code Part No. Description Pkg Qty
646-265 AR-460S 1/2” x 50’ Air Hose 1
AUTOMATIC POLYURETHANE HOSE REEL
• Automatic air hose reel 1/2” x 50’ air hose with a newly designed swivel
mounting base assembled.
• Maximum swivel angle 180°
• Auto rewind latching equipment made of high quality, which offers safe
and convenient use
• The mobile bracket can let the hose reel swivel through 180° to enlarge
working area
• Excellent ultraviolet proof outer cap storage equipment effectively
protects air hose from damage
• Air hose is light weight, wear, corrode, harden, curved and break resistant.
It could be flexibly fixed on walls or ceilings
• Rubber fiber belt works steadily and has a long life span
• Working pressure: 8-10 bar
• Burst pressure: 24-30 bar
Product Code Description Pkg Qty
646-266 4.5m (length) 8m Diameter
Material: PU & PP1
AUTO LOAD AIR HOSE REEL
AIR GUNS
• 1/4” female NPT
• Working pressure: 90 psi
• Bursting pressure: 225 psi
Product Code Description Pkg Qty
646-245 Standard Blow Gun 1
646-247 Plastic Air Gun with Extended Tip 1
AIR ACCESSORIES (CONT)
AUTOMOTIVE
26www.docap.com
TORONTO (HEAD OFFICE)6601 Goreway Dr. Unit B • Mississauga ON
T: 905.673.0000 F: 905.673.1333
Toll Free: 1.800.268.6955
MONTREAL900 Montee de Liesse • St. Laurent QC
T: 514.344.3536 F: 514.344.1020
Toll Free: 1.800.361.0297
EDMONTON11716-170th St. • Edmonton AB
T: 780.453.5895 F: 780.454.9302
Toll Free: 1.800.661.1909
CALGARY4311 122nd Ave. S.E. • Calgary AB
F: 780.454.9302 Toll Free: 1.800.661.1909
Product Code Description Pkg Qty
646-267 9m (length) 12m Diameter
Material: PU1
Product Code Description Pkg Qty
646-268 15m (length) 16m Diameter
Material: PVC Mesh1
AUTO LOAD AIR HOSE REEL (CONT)
COILED HOSE WITH FITTING
• Polyurethane hose
• Working pressure: 100 psi
• Bursting pressure: 250 psi
• 1/4” male NPT fitting
• Working pressure: 300 psi
• Bursting pressure: 1200 psi
Product Code Description Pkg Qty
646-270 1/4” x 12’ with 1/4 male NPT fitting 1
646-271 1/4” x 25’ with 1/4 male NPT fitting 1
646-272 1/4” x 50’ with 1/4 male NPT fitting 1
646-273 5/16” x 25’ with 1/4 male NPT fitting 1
646-274 5/16” x 50’ with 1/4 male NPT fitting 1
Product Code Description Pkg Qty
646-280 1/4” x 1/4” x 25’ 1
646-281 1/4” x 1/4” x 50’ 1
646-282 3/8” x 1/4” x 25’ 1
646-283 3/8” x 1/4” x 50’ 1
PVC STRAIGHT HOSE WITH FITTING
• Removes rust and old paint from metal or wood
• Etches designs into glass or plastic
• Includes sandblasting gun with 5.0mm nozzle, steel pick-up tube, 6.0mm
nozzle and 10ft. rubber hose
4 PC SAND BLASTING KIT
Product Code Description Pkg Qty
646-300 4 pc Sand blasting Kit 1
AIR ACCESSORIES (CONT)
AUTOMOTIVE
www.docap.com27 TORONTO (HEAD OFFICE)
6601 Goreway Dr. Unit B • Mississauga ON
T: 905.673.0000 F: 905.673.1333
Toll Free: 1.800.268.6955
MONTREAL900 Montee de Liesse • St. Laurent QC
T: 514.344.3536 F: 514.344.1020
Toll Free: 1.800.361.0297
EDMONTON11716-170th St. • Edmonton AB
T: 780.453.5895 F: 780.454.9302
Toll Free: 1.800.661.1909
CALGARY4311 122nd Ave. S.E. • Calgary AB
F: 780.454.9302 Toll Free: 1.800.661.1909
Product Code
Part Number Description Pkg
Qty
607-045 G45DF 3 prong “U” ground plug. Dead front 10
607-047 G473 wire cord connector with
adjustable clamp. “U” ground10
607-048 F48U 3 way cube cap “U” ground 10
BLOCK HEATER PARTS
Product Code Part Number Description
842-209 RF-0901H 9” Electric Fan 12V
842-210 RF-1001H 10” Electric Fan 12V
842-212 RF-1101H 12” Electric Fan 12V
842-214 RF-1401H 14” Electric Fan 12V
842-216 RF-1601H 16” Electric Fan 12V
842-224 RF-1402H 14” Electric Fan 24V
842-226 RF-1602H 16” Electric Fan 24V
• Reversible blades for pusher or puller applications
• Coverage for a wide variety of applications
• Complete kits with mounting hardware
• O.E. Replacement, supplemental or add-on cooling needs
• 2 Speeds
UNIVERSAL FAN ASSEMBLIES
ELECTRICAL FANS
Product Code Part Number Description
840-103 FP-103 Premium 12 V
840-106 FP-106 Premium 24 V
841-203 SIG103 Economy 12 V
841-206 SIG106 Economy 24 V
285 PC AUTOMOTIVE ELECTRICAL REPAIR KIT
• Great for use on automotive, marine, industrial and agricultural
applications
• 2-part plastic case folds open 180° for easy access to both sides
• Folds shut for carrying case
• Set contains:
1 - Wire crimping tool
1 - 6-12V tester
1 - Slotted screwdriver
1 - Phillips screwdriver
1 - Roll of electrical tape
2 - Test leads, 32”
5 - Glass style fuses
1 - Fuse puller
1 - Roll of primary wire, 60”
10 - 1/8” Wire clamps
3 - 1/4” Wire clamps
10 - Heat shrink tubes
30 - Small cable ties
10 - Medium cable ties
10 - Large cable ties
6 - Rubber grommets
26 - Assorted wire nuts
160 - Assorted insulated terminals
1 - Plastic organizer case
Product Code Pkg Qty
571-520 1
AUTO & MARINE ELECTRICAL TOOL KIT
INCLUDES:
1 - Crimping Plier 9”
2 - Electrician Screwdrivers
1 - Insulated Tape
1 - Roll Primary Wire
1 - Wire Cutter
22 - Auto Fuses
222 - Cable Ties
1 - Long Nose Plier 6”
1 - Tester
1 - Fuse Puller
2 - Test Leads
40 - PVC Magnetic Twist Ties
106 - Insulated Terminals
Product Code Pkg Qty
571-525 1
AUTOMOTIVE
28www.docap.com
TORONTO (HEAD OFFICE)6601 Goreway Dr. Unit B • Mississauga ON
T: 905.673.0000 F: 905.673.1333
Toll Free: 1.800.268.6955
MONTREAL900 Montee de Liesse • St. Laurent QC
T: 514.344.3536 F: 514.344.1020
Toll Free: 1.800.361.0297
EDMONTON11716-170th St. • Edmonton AB
T: 780.453.5895 F: 780.454.9302
Toll Free: 1.800.661.1909
CALGARY4311 122nd Ave. S.E. • Calgary AB
F: 780.454.9302 Toll Free: 1.800.661.1909
ATO FUSES (PREMIUM)
Product Code Part Number Pkg Qty
521-602 ATO-2 5
521-603 ATO-3 5
521-604 ATO-4 5
521-605 ATO-5 5
521-608 ATO-7.1/2 5
521-610 ATO-10 5
521-615 ATO-15 5
521-620 ATO-20 5
521-625 ATO-25 5
521-630 ATO-30 5
521-640 ATO-40 5
FUSES
MINI® FUSES
Product Code Part Number Pkg Qty
521-802 MIN-2 5
521-803 MIN-3 5
521-804 MIN-4 5
521-805 MIN-5 5
521-806 MIN-7.1/2 5
521-807 MIN-10 5
521-808 MIN-20 5
521-809 MIN-25 5
521-810 MIN-30 5
521-815 MIN-15 5
• A miniaturized version of the ATO blade
fuse. The MINI®Fuse permits more fuses in
the same amount of space.
ATS FUSES (ECONOMY)
Product Code Part Number Pkg Qty
521-653 ATS-3 10
521-655 ATS-5 10
521-657 ATS-7.1/2 10
521-660 ATS-10 10
521-665 ATS-15 10
521-670 ATS-20 10
521-675 ATS-25 10
LOW PROFILE MINI® BLADE BOX FUSES
Product Code Part Number Pkg Qty
521-822 LMIN-2 5
521-823 LMIN-3 5
521-824 LMIN-4 5
521-825 LMIN-5 5
521-826 LMIN-7.1/2 5
521-827 LMIN-10 5
521-828 LMIN-15 5
521-830 LMIN-20 5
521-835 LMIN-25 5
521-840 LMIN-30 5
SFE FUSES
Product Code Part Number Pkg Qty
521-004 SFE-04 5
521-006 SFE-06 5
521-008 SFE-08 5
521-009 SFE-09 5
521-014 SFE-14 5
521-020 SFE-20 5
521-030 SFE-30 5
AGC FUSES
AGA FUSES
Product Code Part Number Pkg Qty
521-085 AGA-1.1/2 5
521-092 AGA-2 5
521-095 AGA-2.1/5 5
521-103 AGA-3 5
521-105 AGA-5 5
521-106 AGA-6 5
521-108 AGA-7.1/2 5
521-110 AGA-10 5
521-115 AGA-15 5
521-120 AGA-20 5
521-125 AGA-25 5
521-130 AGA-30 5
Product Code Part Number Pkg Qty
521-181 AGC-1 5
521-185 AGC-1.1/2 5
521-192 AGC-2 5
521-195 AGC-2.1/2 5
521-203 AGC-3 5
521-204 AGC-4 5
521-205 AGC-5 5
521-206 AGC-6 5
521-207 AGC-7.1/2 5
521-208 AGC-8 5
521-210 AGC-10 5
521-215 AGC-15 5
521-220 AGC-20 5
521-225 AGC-25 5
521-230 AGC-30 5
521-235 AGC-35 5
AUTOMOTIVE
www.docap.com29 TORONTO (HEAD OFFICE)
6601 Goreway Dr. Unit B • Mississauga ON
T: 905.673.0000 F: 905.673.1333
Toll Free: 1.800.268.6955
MONTREAL900 Montee de Liesse • St. Laurent QC
T: 514.344.3536 F: 514.344.1020
Toll Free: 1.800.361.0297
EDMONTON11716-170th St. • Edmonton AB
T: 780.453.5895 F: 780.454.9302
Toll Free: 1.800.661.1909
CALGARY4311 122nd Ave. S.E. • Calgary AB
F: 780.454.9302 Toll Free: 1.800.661.1909
MAXI™ FUSES
• This product has been designed by
Littelfuse to protect wiring systems
from damage. It is designed to replace
the commonly used fusible wire or
fusible link.
Product Code Part Number Pkg Qty
521-850 MAX-20 1
521-851 MAX-30 1
521-852 MAX-40 1
521-853 MAX-50 1
521-854 MAX-60 1
AGX FUSES
GBC FUSES
FEMALE TERM (PAL)
STRAIGHT MALE TERM (PAL)
FUSES (CONT)
AGU FUSES
AGW FUSES
Product Code Part Number Pkg Qty
521-301 AGU-1 10
521-302 AGU-2 10
521-303 AGU-3 10
521-304 AGU-4 10
521-305 AGU-5 10
521-310 AGU-10 10
521-315 AGU-15 10
521-320 AGU-20 10
521-325 AGU-25 10
521-326 AGU-30 10
521-327 AGU-35 10
521-328 AGU-40 10
521-329 AGU-50 10
521-331 AGU-60 10
Product Code Part Number Pkg Qty
521-381 AGW-1 5
521-385 AGW-1.1/2 5
521-395 AGW-2.1/2 5
521-403 AGW-3 5
521-404 AGW-4 5
521-405 AGW-5 5
521-406 AGW-6 5
521-415 AGW-15 5
521-420 AGW-20 5
521-430 AGW-30 5
Product Code Part Number Pkg Qty
521-502 AGX-2 5
521-503 AGX-3 5
521-520 AGX-20 5
521-525 AGX-25 5
521-530 AGX-30 5
Product Code Part Number Pkg Qty
521-705 GBC-5 5
521-708 GBC-8 5
521-716 GBC-16 5
521-725 GBC-25 5
Product Code Part Number Pkg Qty
521-771 PAL 020 1
521-772 PAL 030 1
521-773 PAL 040 1
521-774 PAL 050 1
521-775 PAL 060 1
Product Code Part Number Pkg Qty
521-776 PAL 130 1
521-777 PAL 160 1
521-778 PAL 180 1
521-779 PAL 1100 1
521-780 PAL 1120 1
AUTOMOTIVE
30www.docap.com
TORONTO (HEAD OFFICE)6601 Goreway Dr. Unit B • Mississauga ON
T: 905.673.0000 F: 905.673.1333
Toll Free: 1.800.268.6955
MONTREAL900 Montee de Liesse • St. Laurent QC
T: 514.344.3536 F: 514.344.1020
Toll Free: 1.800.361.0297
EDMONTON11716-170th St. • Edmonton AB
T: 780.453.5895 F: 780.454.9302
Toll Free: 1.800.661.1909
CALGARY4311 122nd Ave. S.E. • Calgary AB
F: 780.454.9302 Toll Free: 1.800.661.1909
CAR FUSES
10 PIECE CAR FUSES
• When fuses blowout they light up
9/16” BENT MALE TERM (PAL)
LOCKING FEMALE TERM (PAL)
13/16” BENT MALE TERM (PAL)
17 PIECE CAR FUSES
Product Code Pkg Qty
521-758 1
• When fuses blowout they light up
• Set contains:
- 2 pcs. 5 amp fuses - amber - 2 pcs. 10 amp fuses - red
- 3 pcs. 15 amp fuses - blue - 4 pcs. 20 amp fuses - yellow
- 3 pcs. 25 amp fuses - clear - 2 pcs. 30 amp fuses - green
- 1 fuse puller
MINI FEMALE TERM (PAL)
FUSES (CONT)
Product Code Part Number Pkg Qty
521-330 ATG-5 1
521-335 ATG-10 1
521-340 ATG-15 1
521-345 ATG-20 1
521-350 ATG-25 1
521-360 ATG-30 1
Product Code Part Number Pkg Qty
521-791 PAL 430 1
521-792 PAL 440 1
521-793 PAL 450 1
521-794 PAL 480 1
521-795 PAL 4100 1
Product Code Part Number Pkg Qty
521-796 PAL 525 1
521-797 PAL 530 1
Product Code Part Number Pkg Qty
521-781 PAL 230 1
521-782 PAL 240 1
521-783 PAL 250 1
521-784 PAL 260 1
521-785 PAL 270 1
521-786 PAL 280 1
521-787 PAL 2100 1
521-788 PAL 2120 1
Product Code Part Number Pkg Qty
521-789 PAL 330 1
521-790 PAL 340 1 CIRCUIT TESTERS
• Test 6, 12, 24 volt systems
• Extra long 48” lead
• Finds shorts and open circuits
• Locate live wires
• Test fuses, light sockets, spark plugs
CIRCUIT AND SPARK PLUG TESTER
CIRCUIT TESTER
Product Code Description Pkg Qty
613-152 Circuit and spark plug tester 1
Product Code Description Pkg Qty
637-100 Circuit tester 1
• Trouble shoot 12 volt & 24 volts circuits
• Heavy duty probe & ground clip
• Extra long 48” lead
VOLTAGE TESTER
Product Code Description Pkg Qty
637-200 Voltage tester 1
• Test 6, 12 and 24 volt system
• 60º heavy duty rubber lead wire
• Replacement bulb No. 1893
AUTOMOTIVE
www.docap.com31 TORONTO (HEAD OFFICE)
6601 Goreway Dr. Unit B • Mississauga ON
T: 905.673.0000 F: 905.673.1333
Toll Free: 1.800.268.6955
MONTREAL900 Montee de Liesse • St. Laurent QC
T: 514.344.3536 F: 514.344.1020
Toll Free: 1.800.361.0297
EDMONTON11716-170th St. • Edmonton AB
T: 780.453.5895 F: 780.454.9302
Toll Free: 1.800.661.1909
CALGARY4311 122nd Ave. S.E. • Calgary AB
F: 780.454.9302 Toll Free: 1.800.661.1909
Product Code Description Pkg
Qty
1156-DOC 12V 32CP Bayonet Bulbs 10
1157-DOC 12V 32/3CP Bayonet Bulbs 10
1157NA-DOC 12V 32/3CP Bayonet Amber Bulbs 10
1895-DOC 12V 2CP G 4 ½ Mini Bayonet Bulbs 10
2057-DOC 12V 32/2CP Bayonet Bulbs 10
67-DOC 12V 4CP (8W) Bayonet Bulbs 10
89-DOC 12V 6CP (7.5W) Bayonet Bulbs 10
Product Code Description Pkg
Qty
194-DOC 12V 2CP T10 Wedge Bulbs 10
3057-DOC 12V 32/2CP Wedge Bulbs 10
3156-DOC 12V 32CP Wedge Bulbs 10
3157-DOC 12V 32/3CP Wedge Bulbs 10
3157NA-DOC 12V 32/3CP Wedge Amber Bulbs 10
AUTOMOTIVE LIGHTBULBS
WEDGE BULBS
BAYONET BULBS
Product Code Description Pkg
Qty
9004-DOC 12V 65/45W Halogen Bulb 1
9005-DOC 12V 65W Halogen Bulb 1
9006-DOC 12V 55W LM Halogen Bulb 1
9007-DOC 12V 65/55W LM Halogen Bulb 1
HALOGEN BULBS
illustrations
I-1
ORINGS CHART
* sizes may not be to scale
illustrations
I-2
ORINGS CHART
* sizes may not be to scale
illustrations
I-3
GROMMETS CHART
* sizes may not be to scale
index
I-4
Product Code Page Product Code Page Product Code Page Product Code Page Product Code Page
67-DOC . . . . . . . . . . . 31
89-DOC . . . . . . . . . . . 31
194-DOC . . . . . . . . . . 31
1156-DOC. . . . . . … 31
1157-DOC. . . . . . … 31
1157NA-DOC . . … 31
1895-DOC. . . . . . … 31
2057-DOC. . . . . . … 31
3057-DOC. . . . . . … 31
3156-DOC. . . . . . … 31
3157-DOC. . . . . . … 31
3157NA-DOC . . … 31
9004-DOC. . . . . . … 31
9005-DOC. . . . . . … 31
9006-DOC. . . . . . … 31
9007-DOC. . . . . . … 31
25062 . . . . . . . . . . . . 14
25080 . . . . . . . . . . . . 14
25090 . . . . . . . . . . . . 14
452-009 . . . . . . . . . . 15
452-009K . . . . . . . . . .15
452-011 . . . . . . . . . . .15
452-011K . . . . . . . . . .15
452-013 . . . . . . . . . . . 15
452-013K . . . . . . . . . .15
452-014 . . . . . . . . . . 15
452-014K . . . . . . . . . 15
452-015 . . . . . . . . . . 15
452-015K . . . . . . . . . 15
452-016 . . . . . . . . . . 15
452-016K . . . . . . . . . 15
452-017 . . . . . . . . . . 15
452-017K . . . . . . . . . 15
452-019 . . . . . . . . . . 15
452-019K . . . . . . . . . 15
458-003 . . . . . . . . . . 15
458-004 . . . . . . . . . . 15
458-005 . . . . . . . . . . 15
458-006 . . . . . . . . . . 15
458-007 . . . . . . . . . . 15
458-008 . . . . . . . . . . 15
458-010 . . . . . . . . . . 15
458-012 . . . . . . . . . . 15
458-016 . . . . . . . . . . 15
458-020 . . . . . . . . . . 15
458-022 . . . . . . . . . . 15
458-024 . . . . . . . . . . 15
458-026 . . . . . . . . . . 15
458-028 . . . . . . . . . . 15
458-036 . . . . . . . . . . 15
458-038 . . . . . . . . . . 15
458-040 . . . . . . . . . . 15
458-042 . . . . . . . . . . 15
458-046 . . . . . . . . . . 15
458-048 . . . . . . . . . . 15
458-052 . . . . . . . . . . 15
458-058 . . . . . . . . . . 15
458-080 . . . . . . . . . . 15
458-081 . . . . . . . . . . 15
458-083 . . . . . . . . . . 15
460-017 . . . . . . . . . . 15
466-100 . . . . . . . . . . 1
466-101 . . . . . . . . . . 1
466-102 . . . . . . . . . . 1
466-103 . . . . . . . . . . 1
466-104 . . . . . . . . . . 1
466-105 . . . . . . . . . . 1
466-106 . . . . . . . . . . 1
466-107 . . . . . . . . . . 1
466-108 . . . . . . . . . . 1
466-109 . . . . . . . . . . 1
466-112 . . . . . . . . . . 1
466-115 . . . . . . . . . . 1
467-001 . . . . . . . . . . 1
467-004 . . . . . . . . . . 1
467-008 . . . . . . . . . . 1
467-009 . . . . . . . . . . 1
467-013 . . . . . . . . . . 1
467-022 . . . . . . . . . . 1
467-023 . . . . . . . . . . 1
467-025 . . . . . . . . . . 1
467-026 . . . . . . . . . . 1
467-031 . . . . . . . . . . 1
467-032 . . . . . . . . . . 1
467-034 . . . . . . . . . . 1
467-035 . . . . . . . . . . 1
468-113 . . . . . . . . . . 1
468-114 . . . . . . . . . . 1
468-115 . . . . . . . . . . 1
468-116 . . . . . . . . . . 1
468-117 . . . . . . . . . . 1
468-118 . . . . . . . . . . 1
468-119 . . . . . . . . . . 1
468-120 . . . . . . . . . . 1
468-122 . . . . . . . . . . 1
468-124 . . . . . . . . . . 1
468-125 . . . . . . . . . . 1
472-102 . . . . . . . . . . 16
472-103 . . . . . . . . . . 16
472-107 . . . . . . . . . . 16
472-108 . . . . . . . . . . 16
472-110 . . . . . . . . . . 16
472-112 . . . . . . . . . . 16
472-113 . . . . . . . . . . 16
472-114 . . . . . . . . . . 16
472-115 . . . . . . . . . . 16
472-116 . . . . . . . . . . 16
500-312 . . . . . . . . . . 4
500-313 . . . . . . . . . . 4
500-320 . . . . . . . . . . 4
500-321 . . . . . . . . . . 4
500-330 . . . . . . . . . . 4
500-331 . . . . . . . . . . 4
500-340 . . . . . . . . . . 4
500-341 . . . . . . . . . . 4
500-351 . . . . . . . . . . 4
500-352 . . . . . . . . . . 4
500-360 . . . . . . . . . . 4
500-361 . . . . . . . . . . 4
500-372 . . . . . . . . . . 4
500-408 . . . . . . . . . . 4
500-412 . . . . . . . . . . 4
500-420 . . . . . . . . . . 4
500-430 . . . . . . . . . . 4
500-440 . . . . . . . . . . 4
500-451 . . . . . . . . . . 4
500-460 . . . . . . . . . . 4
500-472 . . . . . . . . . . 4
500-512 . . . . . . . . . . 4
500-520 . . . . . . . . . . 4
500-530 . . . . . . . . . . 4
500-540 . . . . . . . . . . 4
500-551 . . . . . . . . . . 4
500-560 . . . . . . . . . . 4
500-572 . . . . . . . . . . 4
500-612 . . . . . . . . . . 4
500-620 . . . . . . . . . . 4
500-630 . . . . . . . . . . 4
500-640 . . . . . . . . . . 4
500-651 . . . . . . . . . . 4
500-660 . . . . . . . . . . 4
500-672 . . . . . . . . . . 4
501-312 . . . . . . . . . . 4
501-313 . . . . . . . . . . 5
501-320 . . . . . . . . . . 4
501-321 . . . . . . . . . . 5
501-330 . . . . . . . . . . 4
501-331 . . . . . . . . . . 5
501-340 . . . . . . . . . . 4
501-341 . . . . . . . . . . 5
501-351 . . . . . . . . . . 4
501-352 . . . . . . . . . . 5
501-360 . . . . . . . . . . 4
501-361 . . . . . . . . . . 5
501-372 . . . . . . . . . . 4
501-412 . . . . . . . . . . 4
501-420 . . . . . . . . . . 4
501-430 . . . . . . . . . . 4
501-440 . . . . . . . . . . 4
501-451 . . . . . . . . . . 4
501-460 . . . . . . . . . . 4
501-472 . . . . . . . . . . 4
501-512 . . . . . . . . . . 4
501-520 . . . . . . . . . . 4
501-530 . . . . . . . . . . 4
501-540 . . . . . . . . . . 4
501-551 . . . . . . . . . . 4
501-560 . . . . . . . . . . 4
501-572 . . . . . . . . . . 4
501-612 . . . . . . . . . . 4
501-620 . . . . . . . . . . 4
501-630 . . . . . . . . . . 4
501-640 . . . . . . . . . . 4
501-651 . . . . . . . . . . 4
501-660 . . . . . . . . . . 4
501-672 . . . . . . . . . . 4
502-007 . . . . . . . . . . 5
502-009 . . . . . . . . . . 5
502-016 . . . . . . . . . . 5
502-019 . . . . . . . . . . 5
502-021 . . . . . . . . . . 5
502-027 . . . . . . . . . . 5
502-028 . . . . . . . . . . 5
502-029 . . . . . . . . . . 5
502-030 . . . . . . . . . . 5
502-031 . . . . . . . . . . 5
502-032 . . . . . . . . . . 5
502-033 . . . . . . . . . . 5
502-035 . . . . . . . . . . 5
502-100 . . . . . . . . . . 5
502-101 . . . . . . . . . . 1
502-102 . . . . . . . . . . 1
502-104 . . . . . . . . . . 1
502-106 . . . . . . . . . . 1
502-108 . . . . . . . . . . 1
502-110 . . . . . . . . . . 1
502-112 . . . . . . . . . . 1
502-114 . . . . . . . . . . 1
502-116 . . . . . . . . . . 1
502-118 . . . . . . . . . . 2
502-120 . . . . . . . . . . 2
502-122 . . . . . . . . . . 2
502-124 . . . . . . . . . . 2
502-126 . . . . . . . . . . 2
502-128 . . . . . . . . . . 2
502-130 . . . . . . . . . . 2
502-132 . . . . . . . . . . 2
502-133 . . . . . . . . . . 2
502-136 . . . . . . . . . . 2
502-138 . . . . . . . . . . 2
502-140 . . . . . . . . . . 2
502-142 . . . . . . . . . . 2
502-144 . . . . . . . . . . 2
502-146 . . . . . . . . . . 2
502-148 . . . . . . . . . . 2
502-150 . . . . . . . . . . 2
502-152 . . . . . . . . . . 2
502-154 . . . . . . . . . . 2
502-155 . . . . . . . . . . 2
502-158 . . . . . . . . . . 2
502-160 . . . . . . . . . . 2
502-162 . . . . . . . . . . 2
502-164 . . . . . . . . . . 2
502-166 . . . . . . . . . . 2
502-168 . . . . . . . . . . 2
502-170 . . . . . . . . . . 2
502-172 . . . . . . . . . . 2
502-174 . . . . . . . . . . 3
502-176 . . . . . . . . . . 3
502-178 . . . . . . . . . . 3
502-180 . . . . . . . . . . 3
502-182 . . . . . . . . . . 3
502-234 . . . . . . . . . . 4
502-256 . . . . . . . . . . 4
502-306 . . . . . . . . . . 3
502-312 . . . . . . . . . . 3
502-324 . . . . . . . . . . 3
502-348 . . . . . . . . . . 3
502-406 . . . . . . . . . . 3
502-412 . . . . . . . . . . 3
502-424 . . . . . . . . . . 3
502-448 . . . . . . . . . . 3
502-608 . . . . . . . . . . 5
502-612 . . . . . . . . . . 5
502-620 . . . . . . . . . . 5
502-630 . . . . . . . . . . 5
502-640 . . . . . . . . . . 5
502-651 . . . . . . . . . . 5
502-660 . . . . . . . . . . 5
502-708 . . . . . . . . . . 5
502-712 . . . . . . . . . . 5
502-720 . . . . . . . . . . 5
502-730 . . . . . . . . . . 5
502-740 . . . . . . . . . . 5
502-751 . . . . . . . . . . 5
502-760 . . . . . . . . . . 5
502-810 . . . . . . . . . . 3
502-820 . . . . . . . . . . 3
502-830 . . . . . . . . . . 3
502-840 . . . . . . . . . . 3
index
I-5
Product Code Page Product Code Page Product Code Page Product Code Page Product Code Page
503-007 . . . . . . . . . . 6
503-009 . . . . . . . . . . 6
503-010 . . . . . . . . . . 6
503-011 . . . . . . . . . . 6
506-100 . . . . . . . . . . 6
506-101 . . . . . . . . . . 6
506-102 . . . . . . . . . . 6
506-610 . . . . . . . . . . 7
506-611 . . . . . . . . . . 7
506-612 . . . . . . . . . . 7
506-613 . . . . . . . . . . 7
506-627 . . . . . . . . . . 7
506-629 . . . . . . . . . . 7
506-636 . . . . . . . . . . 7
506-637 . . . . . . . . . . 7
506-641 . . . . . . . . . . 7
506-652 . . . . . . . . . . 7
506-688 . . . . . . . . . . 7
506-710 . . . . . . . . . . 7
506-711 . . . . . . . . . . 7
506-745 . . . . . . . . . . 7
506-790 . . . . . . . . . . 7
506-845 . . . . . . . . . . 7
506-871 . . . . . . . . . . 7
506-890 . . . . . . . . . . 7
506-891 . . . . . . . . . . 7
506-911 . . . . . . . . . . 7
506-931 . . . . . . . . . . 7
506-945 . . . . . . . . . . 7
506-990 . . . . . . . . . . 7
506-991 . . . . . . . . . . 7
506-992 . . . . . . . . . . 7
506-993 . . . . . . . . . . 7
508-000 . . . . . . . . . . 7
508-001 . . . . . . . . . . 7
508-002 . . . . . . . . . . 7
508-003 . . . . . . . . . . 7
508-004 . . . . . . . . . . 7
508-006 . . . . . . . . . . 7
508-008 . . . . . . . . . . 7
508-010 . . . . . . . . . . 7
508-012 . . . . . . . . . . 7
508-016 . . . . . . . . . . 7
508-020 . . . . . . . . . . 7
508-024 . . . . . . . . . . 7
508-028 . . . . . . . . . . 7
508-032 . . . . . . . . . . 7
508-036 . . . . . . . . . . 7
508-040 . . . . . . . . . . 7
508-044 . . . . . . . . . . 7
508-048 . . . . . . . . . . 7
508-052 . . . . . . . . . . 7
508-056 . . . . . . . . . . 8
508-064 . . . . . . . . . . 8
508-072 . . . . . . . . . . 8
508-080 . . . . . . . . . . 8
508-088 . . . . . . . . . . 8
508-096 . . . . . . . . . . 8
508-104 . . . . . . . . . . 8
508-116 . . . . . . . . . . 8
508-504 . . . . . . . . . . 8
508-506 . . . . . . . . . . 8
508-508 . . . . . . . . . . 8
509-506 . . . . . . . . . . 8
509-508 . . . . . . . . . . 8
509-510 . . . . . . . . . . 8
509-512 . . . . . . . . . . 8
509-516 . . . . . . . . . . 8
509-520 . . . . . . . . . . 8
509-524 . . . . . . . . . . 8
509-528 . . . . . . . . . . 8
509-532 . . . . . . . . . . 8
509-536 . . . . . . . . . . 8
509-540 . . . . . . . . . . 8
509-544 . . . . . . . . . . 8
509-548 . . . . . . . . . . 8
509-552 . . . . . . . . . . 8
509-556 . . . . . . . . . . 8
509-564 . . . . . . . . . . 8
509-572 . . . . . . . . . . 8
509-580 . . . . . . . . . . 8
509-588 . . . . . . . . . . 8
509-596 . . . . . . . . . . 8
509-604 . . . . . . . . . . 8
509-616 . . . . . . . . . . 8
510-001 . . . . . . . . . . 8
510-002 . . . . . . . . . . 8
510-003 . . . . . . . . . . 8
510-006 . . . . . . . . . . 8
510-007 . . . . . . . . . . 8
510-008 . . . . . . . . . . 8
510-009 . . . . . . . . . . 8
510-010 . . . . . . . . . . 8
510-011 . . . . . . . . . . 8
510-012 . . . . . . . . . . 8
510-013 . . . . . . . . . . 8
510-014 . . . . . . . . . . 8
510-015 . . . . . . . . . . 8
510-020 . . . . . . . . . . 8
510-021 . . . . . . . . . . 8
510-022 . . . . . . . . . . 8
510-023 . . . . . . . . . . 8
510-026 . . . . . . . . . . 8
510-028 . . . . . . . . . . 8
510-037 . . . . . . . . . . 8
510-043 . . . . . . . . . . 8
510-044 . . . . . . . . . . 8
510-045 . . . . . . . . . . 8
510-046 . . . . . . . . . . 8
510-047 . . . . . . . . . . 8
510-062 . . . . . . . . . . 8
510-068 . . . . . . . . . . 8
510-102 . . . . . . . . . . 8
510-103 . . . . . . . . . . 8
510-129 . . . . . . . . . . 8
510-200 . . . . . . . . . . 8
510-201 . . . . . . . . . . 8
510-202 . . . . . . . . . . 8
510-203 . . . . . . . . . . 8
510-204 . . . . . . . . . . 8
510-205 . . . . . . . . . . 8
510-206 . . . . . . . . . . 8
510-207 . . . . . . . . . . 8
510-208 . . . . . . . . . . 8
510-209 . . . . . . . . . . 8
510-210 . . . . . . . . . . 8
510-211 . . . . . . . . . . 8
510-212 . . . . . . . . . . 8
511-016 . . . . . . . . . . 9
511-017 . . . . . . . . . . 9
511-018 . . . . . . . . . . 9
511-025 . . . . . . . . . . 9
511-029 . . . . . . . . . . 9
511-030 . . . . . . . . . . 9
511-038 . . . . . . . . . . 9
511-039 . . . . . . . . . . 9
511-040 . . . . . . . . . . 9
511-041 . . . . . . . . . . 9
511-042 . . . . . . . . . . 9
511-048 . . . . . . . . . . 9
511-050 . . . . . . . . . . 9
511-052 . . . . . . . . . . 9
511-054 . . . . . . . . . . 9
511-057 . . . . . . . . . . 9
511-058 . . . . . . . . . . 9
511-059 . . . . . . . . . . 9
511-065 . . . . . . . . . . 9
511-066 . . . . . . . . . . 9
511-069 . . . . . . . . . . 9
511-070 . . . . . . . . . . 9
511-071 . . . . . . . . . . 9
511-072 . . . . . . . . . . 9
511-074 . . . . . . . . . . 9
511-075 . . . . . . . . . . 9
511-076 . . . . . . . . . . 9
511-077 . . . . . . . . . . 9
511-078 . . . . . . . . . . 9
511-080 . . . . . . . . . . 9
511-081 . . . . . . . . . . 9
511-082 . . . . . . . . . . 9
511-083 . . . . . . . . . . 9
511-084 . . . . . . . . . . 9
511-085 . . . . . . . . . . 9
511-086 . . . . . . . . . . 9
511-087 . . . . . . . . . . 9
511-088 . . . . . . . . . . 9
511-089 . . . . . . . . . . 9
511-090 . . . . . . . . . . 9
511-092 . . . . . . . . . . 9
511-093 . . . . . . . . . . 9
511-094 . . . . . . . . . . 9
511-095 . . . . . . . . . . 9
511-096 . . . . . . . . . . 9
511-097 . . . . . . . . . . 9
511-098 . . . . . . . . . . 9
511-099 . . . . . . . . . . 9
511-101 . . . . . . . . . . 9
511-105 . . . . . . . . . . 9
511-106 . . . . . . . . . . 9
511-107 . . . . . . . . . . 9
511-109 . . . . . . . . . . 9
511-110 . . . . . . . . . . 9
511-111 . . . . . . . . . . 9
511-112 . . . . . . . . . . 9
511-113 . . . . . . . . . . 9
511-126 . . . . . . . . . . 9
511-127 . . . . . . . . . . 9
511-128 . . . . . . . . . . 9
511-131 . . . . . . . . . . 9
511-132 . . . . . . . . . . 9
511-133 . . . . . . . . . . 9
511-134 . . . . . . . . . . 9
511-135 . . . . . . . . . . 9
511-137 . . . . . . . . . . 9
511-140 . . . . . . . . . . 9
511-144 . . . . . . . . . . 9
511-145 . . . . . . . . . . 9
511-146 . . . . . . . . . . 9
511-147 . . . . . . . . . . 9
511-149 . . . . . . . . . . 9
511-150 . . . . . . . . . . 9
511-151 . . . . . . . . . . 9
511-152 . . . . . . . . . . 9
511-153 . . . . . . . . . . 9
511-154 . . . . . . . . . . 9
511-156 . . . . . . . . . . 9
511-157 . . . . . . . . . . 9
511-158 . . . . . . . . . . 9
511-159 . . . . . . . . . . 9
511-162 . . . . . . . . . . 9
511-163 . . . . . . . . . . 9
511-164 . . . . . . . . . . 9
511-165 . . . . . . . . . . 9
511-166 . . . . . . . . . . 9
511-167 . . . . . . . . . . 9
511-168 . . . . . . . . . . 9
511-169 . . . . . . . . . . 9
511-170 . . . . . . . . . . 9
511-171 . . . . . . . . . . 9
511-172 . . . . . . . . . . 9
511-173 . . . . . . . . . . 9
511-174 . . . . . . . . . . 9
511-175 . . . . . . . . . . 9
511-185 . . . . . . . . . . 9
511-249 . . . . . . . . . . 9
511-275 . . . . . . . . . . 9
512-002 . . . . . . . . . . 10
512-004 . . . . . . . . . . 10
512-006 . . . . . . . . . . 10
512-008 . . . . . . . . . . 10
512-012 . . . . . . . . . . 10
512-013 . . . . . . . . . . 10
512-014 . . . . . . . . . . 10
512-015 . . . . . . . . . . 10
512-016 . . . . . . . . . . 10
512-017 . . . . . . . . . . 10
512-019 . . . . . . . . . . 10
512-020 . . . . . . . . . . 10
512-021 . . . . . . . . . . 10
512-022 . . . . . . . . . . 10
512-023 . . . . . . . . . . 10
512-024 . . . . . . . . . . 10
512-030 . . . . . . . . . . 10
512-032 . . . . . . . . . . 10
512-034 . . . . . . . . . . 10
512-040 . . . . . . . . . . 10
512-042 . . . . . . . . . . 10
512-044 . . . . . . . . . . 10
512-046 . . . . . . . . . . 10
512-048 . . . . . . . . . . 10
512-050 . . . . . . . . . . 10
512-052 . . . . . . . . . . 10
512-056 . . . . . . . . . . 10
512-058 . . . . . . . . . . 10
512-060 . . . . . . . . . . 10
512-062 . . . . . . . . . . 10
512-064 . . . . . . . . . . 10
512-066 . . . . . . . . . . 10
512-068 . . . . . . . . . . 10
512-070 . . . . . . . . . . 10
index
I-6
Product Code Page Product Code Page Product Code Page Product Code Page Product Code Page
513-100 . . . . . . . . . . 10
513-101 . . . . . . . . . . 10
513-102 . . . . . . . . . . 10
513-198 . . . . . . . . . . 10
513-199 . . . . . . . . . . 10
513-200 . . . . . . . . . . 10
513-201 . . . . . . . . . . 10
513-202 . . . . . . . . . . 10
513-203 . . . . . . . . . . 10
513-204 . . . . . . . . . . 10
513-205 . . . . . . . . . . 10
513-206 . . . . . . . . . . 10
513-207 . . . . . . . . . . 10
513-208 . . . . . . . . . . 10
513-209 . . . . . . . . . . 10
513-210 . . . . . . . . . . 10
513-211 . . . . . . . . . . 10
513-212 . . . . . . . . . . 10
513-213 . . . . . . . . . . 10
513-400 . . . . . . . . . . 10
513-500 . . . . . . . . . . 10
514-200 . . . . . . . . . . 11
514-360 . . . . . . . . . . 11
514-403 . . . . . . . . . . 11
516-151 . . . . . . . . . . 11
516-152 . . . . . . . . . . 11
516-153 . . . . . . . . . . 11
516-226 . . . . . . . . . . 11
519-001 . . . . . . . . . . 12
519-002 . . . . . . . . . . 12
519-003 . . . . . . . . . . 12
519-004 . . . . . . . . . . 12
519-005 . . . . . . . . . . 12
519-006 . . . . . . . . . . 12
519-007 . . . . . . . . . . 12
519-008 . . . . . . . . . . 12
519-009 . . . . . . . . . . 12
519-010 . . . . . . . . . . 12
519-011 . . . . . . . . . . 12
519-012 . . . . . . . . . . 12
519-013 . . . . . . . . . . 12
519-014 . . . . . . . . . . 12
519-015 . . . . . . . . . . 12
519-016 . . . . . . . . . . 12
519-017 . . . . . . . . . . 12
519-018 . . . . . . . . . . 12
519-019 . . . . . . . . . . 12
519-020 . . . . . . . . . . 12
519-021 . . . . . . . . . . 12
519-022 . . . . . . . . . . 12
519-023 . . . . . . . . . . 12
519-024 . . . . . . . . . . 12
519-025 . . . . . . . . . . 12
519-026 . . . . . . . . . . 12
519-027 . . . . . . . . . . 12
519-028 . . . . . . . . . . 12
519-029 . . . . . . . . . . 12
519-030 . . . . . . . . . . 12
519-070 . . . . . . . . . . 12
519-140 . . . . . . . . . . 12
519-141 . . . . . . . . . . 12
519-145 . . . . . . . . . . 13
519-146 . . . . . . . . . . 13
519-147 . . . . . . . . . . 13
519-148 . . . . . . . . . . 13
519-149 . . . . . . . . . . 13
519-150 . . . . . . . . . . 13
519-151 . . . . . . . . . . 13
519-152 . . . . . . . . . . 13
519-153 . . . . . . . . . . 13
519-154 . . . . . . . . . . 13
519-155 . . . . . . . . . . 13
519-156 . . . . . . . . . . 13
519-157 . . . . . . . . . . 13
519-158 . . . . . . . . . . 13
519-159 . . . . . . . . . . 13
519-160 . . . . . . . . . . 13
519-161 . . . . . . . . . . 13
519-162 . . . . . . . . . . 13
519-163 . . . . . . . . . . 13
519-164 . . . . . . . . . . 13
519-165 . . . . . . . . . . 13
519-166 . . . . . . . . . . 13
519-167 . . . . . . . . . . 13
519-168 . . . . . . . . . . 13
519-169 . . . . . . . . . . 13
519-170 . . . . . . . . . . 13
519-171 . . . . . . . . . . 13
519-172 . . . . . . . . . . 13
519-173 . . . . . . . . . . 13
519-174 . . . . . . . . . . 13
519-175 . . . . . . . . . . 13
519-176 . . . . . . . . . . 13
519-180 . . . . . . . . . . 13
519-181 . . . . . . . . . . 13
519-182 . . . . . . . . . . 13
519-183 . . . . . . . . . . 13
519-184 . . . . . . . . . . 13
519-185 . . . . . . . . . . 13
519-186 . . . . . . . . . . 13
519-187 . . . . . . . . . . 13
519-188 . . . . . . . . . . 13
519-189 . . . . . . . . . . 13
519-190 . . . . . . . . . . 13
519-191 . . . . . . . . . . 13
519-192 . . . . . . . . . . 13
519-193 . . . . . . . . . . 13
519-194 . . . . . . . . . . 13
519-195 . . . . . . . . . . 13
519-196 . . . . . . . . . . 13
519-197 . . . . . . . . . . 13
519-198 . . . . . . . . . . 13
519-199 . . . . . . . . . . 13
519-270 . . . . . . . . . . 12
519-271 . . . . . . . . . . 12
519-272 . . . . . . . . . . 12
519-273 . . . . . . . . . . 12
519-300 . . . . . . . . . . 11
519-301 . . . . . . . . . . 11
519-308 . . . . . . . . . . 12
519-312 . . . . . . . . . . 12
519-400 . . . . . . . . . . 13
519-500 . . . . . . . . . . 13
519-501 . . . . . . . . . . 14
519-506 . . . . . . . . . . 14
519-513 . . . . . . . . . . 14
519-521 . . . . . . . . . . 14
519-526 . . . . . . . . . . 14
519-527 . . . . . . . . . . 14
519-531 . . . . . . . . . . 14
519-534 . . . . . . . . . . 14
519-536 . . . . . . . . . . 14
519-544 . . . . . . . . . . 14
519-545 . . . . . . . . . . 14
519-601 . . . . . . . . . . 14
519-602 . . . . . . . . . . 14
519-603 . . . . . . . . . . 14
519-604 . . . . . . . . . . 14
519-605 . . . . . . . . . . 14
519-606 . . . . . . . . . . 14
519-607 . . . . . . . . . . 14
520-50 . . . . . . . . . . . 14
520-100 . . . . . . . . . . 14
521-004 . . . . . . . . . . 28
521-006 . . . . . . . . . . 28
521-008 . . . . . . . . . . 28
521-009 . . . . . . . . . . 28
521-014 . . . . . . . . . . 28
521-020 . . . . . . . . . . 28
521-030 . . . . . . . . . . 28
521-085 . . . . . . . . . . 28
521-092 . . . . . . . . . . 28
521-095 . . . . . . . . . . 28
521-103 . . . . . . . . . . 28
521-105 . . . . . . . . . . 28
521-106 . . . . . . . . . . 28
521-108 . . . . . . . . . . 28
521-110 . . . . . . . . . . 28
521-115 . . . . . . . . . . 28
521-120 . . . . . . . . . . 28
521-125 . . . . . . . . . . 28
521-130 . . . . . . . . . . 28
521-181 . . . . . . . . . . 28
521-185 . . . . . . . . . . 28
521-192 . . . . . . . . . . 28
521-195 . . . . . . . . . . 28
521-203 . . . . . . . . . . 28
521-204 . . . . . . . . . . 28
521-205 . . . . . . . . . . 28
521-206 . . . . . . . . . . 28
521-207 . . . . . . . . . . 28
521-208 . . . . . . . . . . 28
521-210 . . . . . . . . . . 28
521-215 . . . . . . . . . . 28
521-220 . . . . . . . . . . 28
521-225 . . . . . . . . . . 28
521-230 . . . . . . . . . . 28
521-235 . . . . . . . . . . 28
521-301 . . . . . . . . . . 29
521-302 . . . . . . . . . . 29
521-303 . . . . . . . . . . 29
521-304 . . . . . . . . . . 29
521-305 . . . . . . . . . . 29
521-310 . . . . . . . . . . 29
521-315 . . . . . . . . . . 29
521-320 . . . . . . . . . . 29
521-325 . . . . . . . . . . 29
521-326 . . . . . . . . . . 29
521-327 . . . . . . . . . . 29
521-328 . . . . . . . . . . 29
521-329 . . . . . . . . . . 29
521-330 . . . . . . . . . . 30
521-331 . . . . . . . . . . 29
521-335 . . . . . . . . . . 30
521-340 . . . . . . . . . . 30
521-345 . . . . . . . . . . 30
521-350 . . . . . . . . . . 30
521-360 . . . . . . . . . . 30
521-381 . . . . . . . . . . 29
521-385 . . . . . . . . . . 29
521-395 . . . . . . . . . . 29
521-403 . . . . . . . . . . 29
521-404 . . . . . . . . . . 29
521-405 . . . . . . . . . . 29
521-406 . . . . . . . . . . 29
521-415 . . . . . . . . . . 29
521-420 . . . . . . . . . . 29
521-430 . . . . . . . . . . 29
521-502 . . . . . . . . . . 29
521-503 . . . . . . . . . . 29
521-520 . . . . . . . . . . 29
521-525 . . . . . . . . . . 29
521-530 . . . . . . . . . . 29
521-602 . . . . . . . . . . 28
521-603 . . . . . . . . . . 28
521-604 . . . . . . . . . . 28
521-605 . . . . . . . . . . 28
521-608 . . . . . . . . . . 28
521-610 . . . . . . . . . . 28
521-615 . . . . . . . . . . 28
521-620 . . . . . . . . . . 28
521-625 . . . . . . . . . . 28
521-630 . . . . . . . . . . 28
521-640 . . . . . . . . . . 28
521-653 . . . . . . . . . . 28
521-655 . . . . . . . . . . 28
521-657 . . . . . . . . . . 28
521-660 . . . . . . . . . . 28
521-665 . . . . . . . . . . 28
521-670 . . . . . . . . . . 28
521-675 . . . . . . . . . . 28
521-705 . . . . . . . . . . 29
521-708 . . . . . . . . . . 29
521-716 . . . . . . . . . . 29
521-725 . . . . . . . . . . 29
521-758 . . . . . . . . . . 30
521-771 . . . . . . . . . . 29
521-772 . . . . . . . . . . 29
521-773 . . . . . . . . . . 29
521-774 . . . . . . . . . . 29
521-775 . . . . . . . . . . 29
521-776 . . . . . . . . . . 29
521-777 . . . . . . . . . . 29
521-778 . . . . . . . . . . 29
521-779 . . . . . . . . . . 29
521-780 . . . . . . . . . . 29
521-781 . . . . . . . . . . 30
521-782 . . . . . . . . . . 30
521-783 . . . . . . . . . . 30
521-784 . . . . . . . . . . 30
521-785 . . . . . . . . . . 30
521-786 . . . . . . . . . . 30
521-787 . . . . . . . . . . 30
521-788 . . . . . . . . . . 30
521-789 . . . . . . . . . . 30
521-790 . . . . . . . . . . 30
521-791 . . . . . . . . . . 30
521-792 . . . . . . . . . . 30
521-793 . . . . . . . . . . 30
521-794 . . . . . . . . . . 30
index
I-7
Product Code Page Product Code Page Product Code Page Product Code Page Product Code Page
521-795 . . . . . . . . . . 30
521-796 . . . . . . . . . . 30
521-797 . . . . . . . . . . 30
521-802 . . . . . . . . . . 28
521-803 . . . . . . . . . . 28
521-804 . . . . . . . . . . 28
521-805 . . . . . . . . . . 28
521-806 . . . . . . . . . . 28
521-807 . . . . . . . . . . 28
521-808 . . . . . . . . . . 28
521-809 . . . . . . . . . . 28
521-810 . . . . . . . . . . 28
521-815 . . . . . . . . . . 28
521-822 . . . . . . . . . . 28
521-823 . . . . . . . . . . 28
521-824 . . . . . . . . . . 28
521-825 . . . . . . . . . . 28
521-826 . . . . . . . . . . 28
521-827 . . . . . . . . . . 28
521-828 . . . . . . . . . . 28
521-830 . . . . . . . . . . 28
521-835 . . . . . . . . . . 28
521-840 . . . . . . . . . . 28
521-850 . . . . . . . . . . 29
521-851 . . . . . . . . . . 29
521-852 . . . . . . . . . . 29
521-853 . . . . . . . . . . 29
521-854 . . . . . . . . . . 29
559-208 . . . . . . . . . . 6
559-212 . . . . . . . . . . 6
559-216 . . . . . . . . . . 6
559-220 . . . . . . . . . . 6
559-224 . . . . . . . . . . 6
559-232 . . . . . . . . . . 6
559-240 . . . . . . . . . . 6
559-248 . . . . . . . . . . 6
559-508 . . . . . . . . . . 6
559-512 . . . . . . . . . . 6
559-516 . . . . . . . . . . 6
559-520 . . . . . . . . . . 6
559-524 . . . . . . . . . . 6
559-532 . . . . . . . . . . 6
559-540 . . . . . . . . . . 6
559-548 . . . . . . . . . . 6
571-520 . . . . . . . . . . 27
571-525 . . . . . . . . . . 27
607-045 . . . . . . . . . . 27
607-047 . . . . . . . . . . 27
607-048 . . . . . . . . . . 27
612-102 . . . . . . . . . . 17
612-109 . . . . . . . . . . 17
612-132 . . . . . . . . . . 17
612-140 . . . . . . . . . . 17
612-150 . . . . . . . . . . 17
612-170 . . . . . . . . . . 17
612-190 . . . . . . . . . . 17
612-191 . . . . . . . . . . 17
612-192 . . . . . . . . . . 18
613-112 . . . . . . . . . . 18
613-113 . . . . . . . . . . 18
613-114 . . . . . . . . . . 18
613-116 . . . . . . . . . . 18
613-117 . . . . . . . . . . 18
613-120 . . . . . . . . . . 18
613-121 . . . . . . . . . . 19
613-122 . . . . . . . . . . 19
613-123 . . . . . . . . . . 19
613-126 . . . . . . . . . . 19
613-127 . . . . . . . . . . 19
613-128 . . . . . . . . . . 19
613-129 . . . . . . . . . . 19
613-130 . . . . . . . . . . 19
613-131 . . . . . . . . . . 20
613-133 . . . . . . . . . . 20
613-135 . . . . . . . . . . 20
613-136 . . . . . . . . . . 20
613-137 . . . . . . . . . . 20
613-141 . . . . . . . . . . 20
613-142 . . . . . . . . . . 20
613-143 . . . . . . . . . . 20
613-144 . . . . . . . . . . 20
613-145 . . . . . . . . . . 20
613-146 . . . . . . . . . . 20
613-147 . . . . . . . . . . 20
613-148 . . . . . . . . . . 20
613-150 . . . . . . . . . . 22
613-151 . . . . . . . . . . 22
613-152 . . . . . . . . . . 30
614-109 . . . . . . . . . . 21
614-112 . . . . . . . . . . 21
614-115 . . . . . . . . . . 21
614-119 . . . . . . . . . . 21
614-124 . . . . . . . . . . 21
614-127 . . . . . . . . . . 21
614-130 . . . . . . . . . . 21
614-137 . . . . . . . . . . 21
614-142 . . . . . . . . . . 21
614-148 . . . . . . . . . . 21
614-158 . . . . . . . . . . 21
614-217 . . . . . . . . . . 21
614-222 . . . . . . . . . . 21
614-227 . . . . . . . . . . 21
614-312 . . . . . . . . . . 21
614-316 . . . . . . . . . . 21
614-320 . . . . . . . . . . 21
614-327 . . . . . . . . . . 21
614-334 . . . . . . . . . . 21
614-341 . . . . . . . . . . 21
614-348 . . . . . . . . . . 21
614-358 . . . . . . . . . . 21
614-420 . . . . . . . . . . 21
614-430 . . . . . . . . . . 21
614-435 . . . . . . . . . . 21
614-445 . . . . . . . . . . 21
614-515 . . . . . . . . . . 21
614-516 . . . . . . . . . . 21
614-518 . . . . . . . . . . 21
614-524 . . . . . . . . . . 21
614-530 . . . . . . . . . . 21
614-536 . . . . . . . . . . 21
614-540 . . . . . . . . . . 21
614-548 . . . . . . . . . . 21
614-608 . . . . . . . . . . 21
614-612 . . . . . . . . . . 21
637-100 . . . . . . . . . . 30
637-200 . . . . . . . . . . 30
638-012 . . . . . . . . . . 22
638-020 . . . . . . . . . . 22
638-022 . . . . . . . . . . 22
638-025 . . . . . . . . . . 22
642-110 . . . . . . . . . . 14
642-118 . . . . . . . . . . 14
643-307 . . . . . . . . . . 22
643-310 . . . . . . . . . . 22
643-320 . . . . . . . . . . 22
643-321 . . . . . . . . . . 22
646-100 . . . . . . . . . . 24
646-101 . . . . . . . . . . 24
646-102 . . . . . . . . . . 24
646-104 . . . . . . . . . . 24
646-106 . . . . . . . . . . 24
646-107 . . . . . . . . . . 24
646-112 . . . . . . . . . . 24
646-114 . . . . . . . . . . 24
646-116 . . . . . . . . . . 24
646-118 . . . . . . . . . . 24
646-120 . . . . . . . . . . 24
646-238 . . . . . . . . . . 24
646-240 . . . . . . . . . . 24
646-245 . . . . . . . . . . 25
646-247 . . . . . . . . . . 25
646-250 . . . . . . . . . . 25
646-260 . . . . . . . . . . 25
646-265 . . . . . . . . . . 25
646-266 . . . . . . . . . . 25
646-267 . . . . . . . . . . 26
646-268 . . . . . . . . . . 26
646-270 . . . . . . . . . . 26
646-271 . . . . . . . . . . 26
646-272 . . . . . . . . . . 26
646-273 . . . . . . . . . . 26
646-274 . . . . . . . . . . 26
646-280 . . . . . . . . . . 26
646-281 . . . . . . . . . . 26
646-282 . . . . . . . . . . 26
646-283 . . . . . . . . . . 26
646-300 . . . . . . . . . . 26
840-103 . . . . . . . . . . 27
840-106 . . . . . . . . . . 27
841-203 . . . . . . . . . . 27
841-206 . . . . . . . . . . 27
842-209 . . . . . . . . . . 27
842-210 . . . . . . . . . . 27
842-212 . . . . . . . . . . 27
842-214 . . . . . . . . . . 27
842-216 . . . . . . . . . . 27
842-224 . . . . . . . . . . 27
842-226 . . . . . . . . . . 27
AP-015 . . . . . . . . . . . 23
AP-016 . . . . . . . . . . . 23
AP-017 . . . . . . . . . . . 23
AP-018 . . . . . . . . . . . 23
AP-019 . . . . . . . . . . . 23
AP-020 . . . . . . . . . . . 23
AP-021 . . . . . . . . . . . 23
AP-022 . . . . . . . . . . . 23
AP-024 . . . . . . . . . . . 23
AP-026 . . . . . . . . . . . 23
AP-028 . . . . . . . . . . . 23
AP602 . . . . . . . . . . . 23
AP605 . . . . . . . . . . . 23
AP-610 . . . . . . . . . . . 23
AP-611 . . . . . . . . . . . 23
AP-613 . . . . . . . . . . . 23
AP-614 . . . . . . . . . . . 23
AP-615 . . . . . . . . . . . 23
AP-616 . . . . . . . . . . . 23
AP-617 . . . . . . . . . . . 23
AP-618 . . . . . . . . . . . 23
AP-619 . . . . . . . . . . . 23
AP-620 . . . . . . . . . . . 23
AP-621 . . . . . . . . . . . 23
AP-622 . . . . . . . . . . . 23
AP-624 . . . . . . . . . . . 23
AP-626 . . . . . . . . . . . 23
AP-628 . . . . . . . . . . . 23
keyword index
I-8
Product Page Product Code Series
4 Pc Sand Blasting Kit 26 646
285 Pc Automotive Electrical Repair Kit 27 571
Air Accessories 24 646
Air Guns 25 646
Auto Load Air Hose Reel (4.5m) 25 646
Automatic Polyurethane Hose Reel 25 646
Coiled Hose with Fitting 26 646
Dual Foot Air Chuck 25 646
Plastic Hose Reel 25 646
Pressure Gun Dial Inflator with
Clip-On Chuck24 646
PVC Straight Hose with Fitting 26 646
Spray Gun and Siphon 25 646
Auto & Marine Electrical Tool Kit 27 571
Automotive Lightbulbs 31 - DOC
Bayonet Bulbs 31 - DOC
Wedge Bulbs 31 - DOC
Halogen Bulbs 31 - DOC
AutoTex Pink Wiper Blades 23 AP
Battery Bolts 20 613
Battery Brush 19 613
Battery Cables 21 614
Battery to Battery 21 614
Side Terminal Battery to Switch 21 614
Switch to Starter 21 614
Top Terminal Battery to Switch
(1 gauge)21 614
Top Terminal Battery to Switch
(4 gauge)21 614
Top Terminal Battery to Switch with
Terminal Lead21 614
Battery Carriers 20 613
Battery Clips 20 613
Battery Clips with Vinyl Boot 20 613
Battery Clips with Vinyl Handles 20 613
Battery Filler 20 613
Battery Hold Down 18 613
Battery Hold Down Bolts 18 613
Non-Adjustable Battery Hold Down 18 613
Plastic Battery Hold Down 18 613
Rubber Clamps - Battery Hold Down 18 613
Battery Post Shims 19 613
Battery Terminal Lifter 19 613
Battery Terminals 17 612
Marine Terminals 18 612
Side Application 17 612
Side Terminal Adapters 17 612
Side Terminal Conversion Posts 17 612
Stud to Post Conversion Set 17 612
Top Application 17 612
Top Application - Heavy Duty 17 612
Block Heater Parts 27 607
Brake Line Adapters 5 502
Brake Line Adapter Assortments 5 502
Brake Line Adapters 5 502
Product Page Product Code Series
Brake Line Long Nuts 5 502
Brake Lines 4 500-502
Armoured 4 501
Brake Line Merchandiser 4 502
Standard 4 500
Car Fuses 31 521
10 Pc Car Fuses 31 521
17 Pc Car Fuses 31 521
Circuit Tester 8 613, 637
Circuit and Spark Plug Tester 8 613
Circuit Tester 8 637
Voltage Tester 8 637
Copper Tubing 6 559
Dash Controls 11 516
Driveway Signal Gong 14 642
Driveway Signal Hose 14 564
Electric Fans 27 840, 842
Engine Stud Nuts 1 467
Engine Studs 1 466
Expansion Plugs 8 510
Concave Type 8 510
Cup Type 9 511
E-Z Seal 8 510
Shallow Type 9 511
E-Z Lok Repair Kit 15 458
E-Z Lock Thread Inserts 15 460
Flat Fender Washers 15 452
Fuel Line Hose 14 553
Fuel Lines 3 502
Fuel Sending Repair Lines 2 502
ABR Style 2 502
BR Style 2 502
MR Style 2 502
Fuses 29 521
13/16" Bent Male Term (PAL) 31 521
9/16" Bent Male Term (PAL) 31 521
AGA Fuses 29 521
AGC Fuses 29 521
AGU Fuses 30 521
AGW Fuses 30 521
AGX Fuses 30 521
ATO Fuses (Premium) 29 521
ATS Fuses (Economy) 29 521
Female Term (PAL) 30 521
GBC Fuses 30 521
Locking Female Term (PAL) 31 521
Low Profile Mini® Blade Box Fuses 29 521
Maxi™ Fuses 30 521
Mini Female Term (PAL) 31 521
Mini® Fuses 29 521
SFE Fuses 29 521
Straight Male Term (PAL) 30 521
keyword index
I-9
Product Page Product Code Series
Grease Fittings 6 506
Grease Fittings 7 506
Metric Grease Fittings Assortment 6 506
Standard Grease Fitting Assortment 6 506
Grease Guns & Accessories 22 638
Flexible Hose 22 638
Grease Gun Coupler 22 638
Pistol Type Grease Gun 22 638
Grommets 13 519
Grommet Assortment 13 519
Grommets 14 519
Hand Choke Adapter 11 516
Hose Clamps 7 508
Fuel Injection 8 508
Hose Clamp Sets "Cut to Size" 7 508
Miniature 7 508
Stainless Steel 8 509
Standard 7 508
Licence Plate Bolts 15 460
Manifold Studs (C1018 Cold Drawn Steel) 1 468
Metric Brake Lines 4 501
Armoured 5 501
British - I.S.O. Bubble Flare 5 502
Japanese - Standard Falre 5 502
Standard 4 500
Metric Expansion (Frost) Plugs 10 512
Cup Type 10 512
Disc Type 10 512
Metric O-Ring Splicing Kit 13 519
Muffler Clamps 10 513
Exhaust Stack Clamp 10 513
Heavy Duty 10 513
Standard 10 513
Universal Tail Pipe Hangers 11 514
Nylon Quick Connect 2 502
2 Straight 3 502
90° 2 502
Straight 2 502
Straight and 90° 3 502
Nylon Repair Slice Line 2 502
Post and Terminal Cleaner 19 613
Protector Caps 19 613
Replacement Battery Trays 20 613
Replacement Side Terminal Bolts 19 613
Rubber Fuel Line 3 502
45° 3 502
Straight 3 502
Side Terminal Battery Wrench 19 613
Steel Battery Clamps 20 613
Steel Fuel Line Repairs 1 502
BB Style 1 502
Mab Style 1 502
Steel Tubing 6 503
Terminal Protectors 18 613
Product Page Product Code Series
Testers 22 613
Anti-Freeze Tester 22 613
Battery Tester 22 613
Throttle Ball Joints 16 472
Transmission Cooler Lines 3 502
O Rings 11 -13 519
High Pressure O-Ring Assortment 12 519
High Pressure O-Rings 13 519
Metric O-Ring Assortment 12 519
Metric O-Rings 13 519
Standard O-Ring Assortment (300 pcs) 11 519
Standard O-Ring Assortment (407pcs) 11 519
Standard O-Rings 12 519
Valve Hardware 25 646
Snap-In Valves 25 646
Valve Caps 25 646
Valve Cores 25 646
Wheel Wrenches 22 643
I-10
• TERMS AND CONDITIONS OF SALE •
The following terms and conditions, including the Return
Policy, are applicable to all Docap product lines.
PAYMENT TERMSSubject to the provisions of CREDIT APPROVAL, terms are Net
30 days upon issuance of invoice; past due thereafter and
payable in Canadian funds
FREIGHT POLICYF.O.B Docap locations
Freight will be prepaid on orders of $750.00 or more on net
invoice value, however, the following exceptions will apply:
Prepaid Freight will NOT apply to the following product:
• Warn Products
• Bolt Bins
• Drum quantity of Spray Nine Product
Prepaid requirements for Threaded Rod orders will be a
minimum $2000.00
Prepaid requirements for Spray Nine orders will be a
minimum of $1000.00
CANCELLATIONStandard orders for stocked items may be cancelled without
charge if communicated to Docap in time to stop the
shipment.
Special orders may NOT be cancelled.
BACKORDERSBackorders will be shipped twice a month, or with next
customer order, whichever comes first, however the
minimum invoice of the backorder must exceed Docap’s
minimum invoice amount of $40.00.
DISCLAIMERNot all geographical areas of Canada are covered by the
above freight policy; please contact your nearest Docap
office listed below for confirmation of these terms and
conditions. Docap may add to, change or remove any part
of these Terms and Conditions of Sale at any time, without
notice.
• TERMES ET CONDITIONS DE VENTE •
Les termes et conditions de vente suivants, incluant la
politique de retour, s’appliquent sur tous les produits Docap.
TERMES DE PAIEMENTSujet aux conditions de l’approbation de crédit, le terme
est de « Net 30 jours » à partir de la date de facturation,
considéré comme en souffrance passé ce délai et payable en
fonds canadiens.
POLITIQUE DE TRANSPORTF.A.B. succursale Docap.
Le transport sera prépayé sur toute commande excédant
$750.00 net sur la facture avant taxes. Toutefois, les
exceptions suivantes s’appliquent :
• Produits Warn
• Ensembles de boulons
• Produits Spray Nine en vrac
Le transport prépayé pour les tiges filetées sera de $2,000.00
minimum.
Le transport prépayé pour le produit Spray Nine sera de
$1,000.00 minimum.
CANCELLATIONLes commandes régulières pour les items en inventaire
peuvent être cancellées sans frais en communiquant avec
Docap avant l’envoi de celle-ci.
Les commandes spéciales ne peuvent être cancellées.
RUPTURE DE MARCHANDISELes commandes en rupture de marchandise seront envoyées
2 fois par mois ou avec la prochaine commande du client,
selon la circonstance par contre la facture doit excéder le
montant minimum de commande de Docap de $40.00.
EXCEPTIONCertaines exceptions s’appliquent selon votre région
concernant les frais de transport, veuillez contacter le bureau
de Docap le plus près, aux endroits mentionnés ci-dessous
pour la confirmation de ces termes et conditions. Docap
peut ajouter, changer ou enlever une de ces conditions de
ventes à n’importe quel moment, sans aucun avertissement.
TERMS AND CONDITIONS OF SALE / TERMES ET CONDITIONS DE VENTE
I-11
• POLITIQUE DE RETOUR •
Tous les retours doivent être autorisés par un représentant du
service à la clientèle de Docap. Tout produit ne peut être retourné
qu’après avoir obtenu un numéro de pré-autorisation de retour de
marchandise (RGA). Afin d’obtenir un numéro de pré-autorisation
(RGA), veuillez contacter un représentant du service à la clientèle
à la succursale Docap la plus près de chez-vous. Le produit
retourné doit avoir été acheté dans les douze (12) derniers mois et
représenter moins de cinq pourcent (5%) des achats de l’année par
ligne de produit.
Le produit doit être retourné à Docap dans les quatorze (14) jours
suivant l’émission du numéro de pré-autorisation. Tout produit
retourné à Docap doit être accompagné du numéro de pré-
autorisation, d’une copie de bon de livraison et/ou d’une copie
de la facture originale, dans son emballage original incluant tout
accessoire, manuels, documentation et enregistrement inclus à
l’origine. Le produit retourné ne doit pas avoir été installé ou
modifié et doit être dans son emballage original, en condition de
revente.
Les items commandés spécialement, assemblés sur mesure, non
listés ou identifiés comme discontinués sont non-retournables.
L’acheteur doit assumer l’expédition, port payé, vers la succursale
Docap. Afin de sécuriser le retour, Docap recommande d’utiliser
un transporteur qui offre le service de repérage et d’assurer le
colis ou de mentionner une valeur déclarée pour tout retour. Ceci
permettra de compenser en cas de perte ou dommages en cours
de transit. Si vous choisissez d’utiliser un transporteur n’offrant
pas ces services, vous devrez assumer les pertes ou dommages
encourus durant l’expédition.
RETOURS AUTORISÉSLes retours autorisés peuvent être sujets des frais de manutention
de vingt-cinq pourcent (25%). Les coûts dépassant vingt-cinq
pourcent (25%) occasionnés par la remise en état des items seront
déduits du montant alloué au credit. Les frais d’expédition ne
seront pas remboursés.
RETOURS NON AUTORISÉSTout retour non autorisé sera refusé et retourné à l’expéditeur à ses
frais.
VENTE DE LIQUIDATIONToutes les ventes indiquées “Liquidation” ou “Spécial” sont FINALES.
Il n’y aura ni retour ni échange sur ces items.
PRODUIT DÉFECTUEUXLe retour d’un produit considéré comme défectueux doit être
pré autorisé par Docap. Il sera à la discrétion de Docap, selon
les directives du manufacturier de déterminer la défectuosité du
produit. Pour les produits considérés comme non défectueux, le
coût du transport de retour à l’expéditeur sera aux frais de celui-ci.
• RETURN POLICY •
All returns must be authorized by a Docap Customer Service
Representative. Product may only be sent back after getting a
pre-authorized Return Goods Authorization (RGA) number. For
an RGA number please contact your nearest Docap branch
listed below.
Docap will accept product, returned for Credit, once in a
calendar year, to a maximum of 5% of previous year’s sales, per
product line.
Product must be returned to Docap within 14 calendar days
of the issuance of the RGA. All products must be returned
with Docap issued RGA number, packing slip/invoice and
packed in the original packaging including any accessories,
manuals, documentation, and registration that shipped with
the product.
Returned product must not be installed or altered and must
be in its original packaging, in saleable condition.
Products that are special order, custom built, not listed or
identified as discontinued products are non-returnable.
The Purchaser is responsible for shipping product, prepaid,
back to our location. Docap recommends that you use a
carrier that offers shipment tracking for all returns and either
insure your package for safe return to Docap or declare the full
value of the shipment so that you are completely protected if
the shipment is lost or damaged in transit.
AUTHORIZED RETURNSAuthorized returns may be subject to a 25% restocking
charge. Any costs in excess of 25% restocking charge incurred
in placing the goods in saleable condition will be charged to
the Purchaser by a corresponding deduction from the allowed
credit.
Shipping charges will not be refunded.
UNAUTHORIZED RETURNSAny unauthorized returns will NOT be accepted and will be
sent to the Purchaser with shipping costs collect.
CLEARANCE SALESSales of items marked as “Clearance” or “Specials” are FINAL.
There will be no returns or exchanges of those items.
DEFECTIVE PRODUCTProduct considered defective for credit return must be
authorized by Docap. Docap in its discretion, along with
its Vendors, will determine whether the returned defective
products are in fact defective. All products that are deemed
not defective, the Purchaser will be responsible for shipping
costs of the product back to them.
RETURN POLICY / POLITIQUE DE RETOUR
I-12
• Heavy Duty Electrical Products • L9 Fasteners• Cleaners & Disinfectants• Lubricants & Lubricant Equipment• Winches & Accessories• CV Axles & Joints• Adhesives/Sealants/Threadlockers• Universal Joints• Aerosol Paint Products
Our suppliers
Our other quality products include...
ADDITIONAL PRODUCTS AVAILABLE AT DOCAP
I-13
Automotive
Brass Fittings
Chain & Rigging
Electrical
Air Brake Tubing
Air Brake Nylon Tubing
Compression Tube Fittings
Drain Cocks
Heavy Duty Multiple Shut-off Cocks
Inverted Flare Tube Fittings
Needle Valves
Pipe Fittings
S.A.E 45° Flare Fittings
Shut-Off Cocks
Aircraft Craft Mild Link
Anchor Shackles Quick Links
Clevis Grab Hooks - Gr. 43 Quick Pins
Clevis Grab Hooks - Gr. 70 S Hook
Clevis Slip Hooks Safety Lanyard Hooks
Cold Shuts Safety Snap Hook
Eye Grab Hooks - Gr. 43 Safety Winch Hooks
Hitch Pins – Fold Over Handle Shoulder Nut Eye Bolt
Hitch Pins - Vinyl Handle Snap Links
Lap Repair Links Turnbuckles – Light Duty
Linch Pins Wire Rope Clips – Malleable
Load Binder Wire Rope Thimbles
DOCAP PRODUCT LITERATURE4 pc Sand Blasting Kit Battery Terminals Expansion Plugs Manifolds Studs
285 Pc Automotive Electrical Repair Kit Block Heater Parts E-Z Lok Repair Kit Mechanic’s Seat Spray Guns
Air Accessories Brake Line Adapters E-Z Lok Thread Inserts Metric Brake Lines Steel Battery Clamps
Auto & Marine Electrical Tool Kit Brake Line Long Nuts Flat Fender Washers Metric Expansion (Frost) Plugs Steel Fuel Line Repairs
Automotive Lightbulbs Brake Lines Fuel Line Hose Metric O-Ring Splicing Kit Steel Tubing
Autotex Pink Wiper Blades Car Fuses Fuel Lines Muffler Clamps Terminal Protectors
Battery Bolts Circuit Testers Fuel Sending Repair Lines Nylon Quick Connect Testers
Battery Brush Copper Tubing Fuses Nylon Repair Slice Line Throttle Ball Joints
Battery Cables Creeper Grease Fittings Post and Terminal Cleaner Tire & Wheel Assemblies
Battery Carriers Dash Controls Grease Guns & Accessories Pressure Gauges Transfer Pumps
Battery Clips Driveway Signal Gong Grommets Protector Caps Transmission Cooler Lines
Battery Filler Driveway Signal Hose Hand Choke Adapter Replacement Battery Trays Universal O-Rings
Battery Hold Down Electric Fans Hand Pump Replacement Side Terminal Bolts Valve Hardware
Battery Post Shims Engine Stud Nuts Hose Clamps Rubber Fuel Line Wheel Wrenches
Battery Terminal Lifter Engine Studs License Plate Bolts Side Terminal Battery Wrench
12V Mini Compressor Digital Battery Load Tester Heavy Duty Wire Stripper
285 pc Automotive Electrical Repair Kit Digital Multi-meter Nail Cable Clips
Auto & Marine Electrical Tool Kit Dynacamp Lantern Open & Close LED Sign
Automotive Lightbulbs Electrical Fans Primary Wire Cable Single Conductor
Block Heater Parts Electrical Tapes Rough Service Bulbs
Breakers Extension Cords Solderless Terminals
Cable Clamps Flashers Switches
Cable Lugs Flashlights Trouble Lights
Car Fuses Fuse Box Wire Nut Connectors
Circuit Testers Fuses Work Lights
Connectors General Purpose Replacement Motors
Crimper Heat Shrinkable Tubing
I-14
DOCAP PRODUCT LITERATURE
Fasteners
P&N/Sutton
Miscellaneous
Tools
Adjustable Button Dies Panel Drills
Button Die Holders Reduced Shank Drills
Centre Drills Screw Extractor/Drill Set
Hand Taps (Chrome Steel) Screw Extractors
Hand Taps (Ground Thread High Speed Steel) Stub Drills
Hand Taps Set (Chrome Steel) Tap Wrenches
Hand Taps Set (Ground Thread High Speed Steel) Tap/Button/Die Set
Hex Die Nuts Taper Shank Drills
Jobber Drill
Alloy Bar L9 Hex Bolts Zinc Dichromate
Clevis Pins L9 Nuts and Washers Socket Pipe Plug
Clevis Yolks Machine Screw Nut Socket Screw Keys
Corrugated Bin Boxes Machine Screws Socket Set Screws
Cotter Pins Machinery Bushings Spring Centre Bolts Without Nuts
Fastener Assortment Drawers Metric Hexagon Head Cap Screws Spring Pins
Flat Head Socket Cap Screws Metric Hexagon Nuts Steel Woodruff Keys
Heavy Duty Bolt Bins Metric Socket Head Cap Screws Stove Bolts With Nuts
Heavy Duty Bolt Bins Labels Metric Socket Screw Keys Stover® Automation Locknut Specifications
Hex Head Cap Screws Metric Washers Stover®Automation Locknuts
Hitch Pin Clips Nuts Taper Pins
Key Stock Sheet Metal Screw (Tapping) Threaded Rod
L9® Design Features Shimstock Washers
L9® Fastening System Snap Rings Wood Screws
L9® Fastening System to Solve Common Problems Socket Head Cap Screws
Coveralls Tapes
Docap Tie Down Telescopic Tools
Outdoor Kits Ties
Rubber Tie Down Tie Wire
Safes Tire and Wheel Assemblies
Safety Products
Safety Vest
Shimstock
“C” Clamps Burrs Flashlights Power Pullers Testers
4 Pc Sand Blasting Kit Cable & Spring Wire Cutter Funnel (Heavy Duty) Retractable Knives T-Handle Key Sets
48” Lift – All Jack Chalk Line Reel Grease Gun & Accessories Rivets Tie Wire
204 Pc Drill Set Chisel Set Hand Pump Rivets Nuts Ties
285 Pc Automotive Electrical Repair Kit Circuit Testers Heavy Duty Wire Stripper Saw Transfer Pumps
Auto & Marine Electrical Tool Kit Cobalt Bi-Metal Blade Hole Saw – High Speed Steel Shears Trigger Sprayer
Axes Creeper Knife Sharpener Shovels Vacuum Cup
Ball Pein Machinist’s Hammers Crimping Tool Magnetic Tools Side Terminal Battery Wrench Vises
Battery Brush Cutters Mallet Sledge Hammer w/ Fibreglass Handle Wrenches
Battery Filler Digital Caliper Mechanic’s Seat Sledge/Club Hammers
Battery Terminal Lifter Digital Multi-Meter Micrometer with Counter Slide Hammer
Bench Grinder Drill Bits One Touch Snow Brush Speed Angle Driver
Brass Jiggle Siphon Drill Chucks Pliers Spray Gun
Brushes Engraver Post and Terminal Cleaner Tape Measures
I-15
NOTESFor orders or inquiries, please call your local Docap location or visit us on the web at www.docap.com
I-16
NOTESFor orders or inquiries, please call your local Docap location or visit us on the web at www.docap.com
TORONTO (HEAD OFFICE)6601 Goreway Dr. Unit B
Mississauga, ONTel: 905.673.0000
Toll Free: 1.800.268.6955
MONTRÉAL900 Montée de Liesse
St. Laurent, QCTel: 514.344.3536
Toll Free: 1.800.361.0297
CALGARY4311 122nd Ave. S.E.
Calgary, ABToll Free: 1.800.661.1909
EDMONTON11716-170th St.Edmonton, AB
Tel: 780.453.5895Toll Free: 1.800.661.1909