AUTOMATION OF WEIGHBRIDGE

The truck enters the premises

The driver fills the details of Company and vehicle on receiving the

RFID card at the entrance

The truck enters and moves towards the

weighbridge.

The truck is now positioned on the weighbridge

The weighbridge is surrounded with sensors.(The white circles define the point of sensors)

If the truck is not positioned correctly, you will hear an automatic generated voice which will point out the error. Without proper

position, no weighment will be captured.

After proper positioning is done, the driver has to show the RFID card in front of the control room.

If the card is valid then automatic weighment is processed and a slip is generated.

Also, as a security process multiple camera’s will capture the weighment transaction.

Once the driver receives the printout, an automatic voice is generated which will inform the driver accordingly that the

transaction is completed.

The truck can leave and come back for the second weighment. The same RFID card can be used again.