Automatic Valves USA pages · NBR = nitrile NBRF = nitrile foodstuff quality NR = natural rubber...
Transcript of Automatic Valves USA pages · NBR = nitrile NBRF = nitrile foodstuff quality NR = natural rubber...
uales
The solution you’ve been looking forTHE SOLUTION YOU’VE BEEN LOOKING FORAUTOMATICVALVES
LPP-DPump
2
The operating principle of a Larox valve is simple. In the open position, the valve is at fullbore with no flow restrictions thus making the valve an integral part of the pipeline. Duringclosing, two pinch bars squeeze the sleeve shut on the centerline.AUTOMATIC
VALVES
Over 50,000 Larox valves are currentlyoperating in mining and metalindustries, minerals processing, pulpand paper, chemical processindustries, energy as well as oil andoffshore industries. Numerousapplications also exist in water andeffluent treatment, dairy, food andbeverage production, andpharmaceutical processing plants.
MODULAR DESIGN
Our modular valve design has threemain components: the sleeve, thebody and the actuator. The sleeve isthe only part that is in contact with theprocess medium. The constructionand materials of all three main
components can be tailored to suitmost process conditions. Self-cleaningLarox valves provide 100% tight shut-off even if solids have built up on thesleeve wall. When compressed, anycrystallized particles flake off thesleeve surface and are washeddownstream.
The standard range is for diametersfrom 1” to 40”, temperatures from-50°F to +320°F, and operatingpressures from vacuum to 1500 psig.
We provide tailor-made flow controlsolutions precisely in accordance withthe customer specifications.
LAROX AUTOMATIC VALVES
Larox automatic valves are ideal for shut off or controlapplications that involve abrasive or corrosive slurries,powders or granular substances. Our advanced flow controlsolutions meet even the most stringent customerspecifications. Larox valves offer substantial savings throughimproved performance, longer service lifetime and lowermaintenance costs.
TECHNICALFEATURES
• 100% Tight
• Full Bore
• Only the Sleeve isin Contact with the Medium
• Linear Control Curve
• Centerline Closing
• Flexible Sleeve
PROCESSBENEFITS
• Excellent Wear Resistance
• High Corrosion Resistance
• No Jamming orClogging
• Self-cleaning
• Trouble-freeOperation
• Long ServiceIntervals
• Low MaintenanceCosts
• Reduced Cost of Ownership
3
ACTUATED ON-OFF VALVES
The actuated on-off valves are ideal when remote control is required. The type ofactuator depends on the operating pressure, availability of power sources andother process requirements.
PVE4A75 PVE4H75 PVE4E150
PNEUMATIC ACTUATOR (A)
The standard pneumatic actuatoris double acting, therefore allowingfast opening and closing. Actuatorhousing, tie rods and piston rodsare available in various materials.Short cycle times are achieved byusing quick exhaust valves.
Pneumatic actuators are suitablefor a wide range of industrialapplications. Epoxy paint can beapplied to further improvecorrosion resistance. The standardpneumatic actuators are simpleand economical to install.
FAIL-SAFE OPTIONS
Pneumatic actuators can beequipped with an override (AB)hand wheel for manual fail-safeand a mechanical (AV) or apneumatic spring (AU) forautomatic fail-safe function.
HYDRAULIC ACTUATOR (H)
The compact, double actinghydraulic actuator is designed forapplications where high closingforces are required (high operatingpressure or large valve diameters).Epoxy painted actuators can beequipped with a pilot operatedcheck valve for fail-safe function.
ELECTRIC ACTUATOR (E)
The standard double actingelectric actuator incorporatesbuilt-in limit and torque switches,as well as a manual overridehand wheel. Electric actuatorsare best suited for applicationsrequiring high closing forcessuch as large valve diameters orhigh operating pressures. It isthe recommended actuator foroperating conditions wherepneumatic and hydraulic poweris unavailable.
SPECIAL ACTUATORS
THE PNEUMATIC MOTOR DRIVEN
ACTUATOR is ideal for high forceapplications with limited space.
HYDRAULIC ACTUATORS withan integrated power unit areelectrically driven stand-alonehydraulic units. The need forhydraulic piping is eliminated asthey are mounted directly onto theactuator.
THE WATER HYDRAULIC
ACTUATOR is best suited forapplications where extremecleanliness or fire safety isrequired and the use of hydraulicoil is unacceptable.
4
R Z
S QPV PVE PVE/S PVS
VALVE MODEL SELECTIONEXAMPLE: PVE4AK150 - 603LR
PVE
MODEL
PV =open
PVE =enclosed
PVE/S =enclosed/sealed
PVS =sealed
4
SIZE(INCH)
1”-40”
150
PRESSURECLASSES(PN)
15= 15 psig
75= 75 psig
150=150 psig
240=240 psig
365=365 psig
600=600 psig
940=940 psig
1500=1500 psig
6
FLANGEDRILLINGS
1 = -
2 = DINPN 10
3 = DINPN 16
4 = DINPN 25
5 = DINPN 40
6 = ANSI 150
7 = ANSI 300
8 = BSTABLE D
9A = ASTABLE D
9B = ASTABLE E
9C = JIS 10
9D = JIS 16
Other, must be
specified
0
BODYMATERIAL*0 = Fe
1 = -
2 = AISI 316
3 = aluminium
4 = other
5 = plastic
3
FLANGESHAPE
type 1 - 4
Determinedby the valvemanufacturer
R
AUXILIARIES
L
OPENINGTAGS
L = openingtags
-AK
ACTUATOR
A = pneumatic
AB = with manual override
AK = with electro- pneumatical
positioner
AN = with pneumatical
positioner
AU = with pneumatical
spring
AV = with mechanical
spring
H = hydraulic
HP = withhydraulicpositioner
E = electric
EO = electric forcontrol
Q =quick exhaust valve
R = inductivelimits
S = magneticlimits
T = mechanicallimits
Z = solenoidvalve
X = other,must be specified
*) Fe DN25-200: GRS 250 (EN-GJL-250), epoxy painted K18-E180/2-FeSa 2DN250…: fabricated Fe37B (EN 10025 S235JRG2), epoxy painted K180-E180/2-FeSa 2
AISI 316 DN25-200: casted (EN 10213-4 1.4408)DN250…: fabricated (EN 10088-2 1.4432)
Aluminium DN25-150: aluminium alloy (EN 1706 EN AC 44200) epoxy painted K18-E180/2-FeSa 2
Plastic Ciba 5000 series DN65---150; PA Blend DN250
SLEEVE MODEL SELECTIONEXAMPLE: SBRT 150 4/9.84/3L6
Opening tags
Reinforcing cords
Wear-resistant inner lining
SBRT
SLEEVE MATERIALS
SBRT = styrene butadiene
EPDM= ethylene propylene
CR = chloroprene
CSM = chloro-sulphone-ethene
FPM = fluorine rubber
HNBR= hydrogenated nitrile
IIR = butyl
NBR = nitrile
NBRF = nitrile foodstuffquality
NR = natural rubber
NRF = natural rubberfoodstuff quality
PU = polyurethane
_/PU = PU coatinginside the sleeve
_/M = Larox SensoMatesleeve
150
PRESSURECLASSES(PN)
15=15 psig
75=75 psig
150=150 psig
240=240 psig
365=365 psig
600=600 psig
940=940 psig
1500=1500 psig
4
SLEEVEINNERDIAMETER(INCHES)
1” - 40”
9.84
SLEEVELENGHT(INCHES)
Depends onthe sleeveinner diameter
3
FLANGESHAPE
type 1
type 3
type 4
L
OPENINGTAGS
L = yes
- = none
/ /
Determinedby the valvemanufacturer
(dependingon the valvediameter /pressureclass)
2
FLANGEDRILLINGS
1 = -
2 = DIN PN 10
3 = DIN PN 16
4 = DIN PN 25
5 = DIN PN 40
6 = ANSI 150
7 = ANSI 300
8 = BS TABLE D
9A = AS TABLE D
9B = AS TABLE E
9C = JIS 10
9D = JIS 16
X = other, mustbe specified
5
6
Larox control valves are designed for demandingcontrol applications in which conventional valvesencounter problems with turbulence and wear.Controllability can be further improved withconical sleeves or smart positioners. Elasticsleeves have been applied for improved wearresistance.
STANDARD POSITIONERS
Larox control valve actuator is equipped with a positioner.The standard positioners for various actuators are as follows:
For Pneumatic Actuators
• Electro-pneumatic (AK), input signal 4 - 20 mA• Pneumatic (AN), input signal 3 - 15 psig
For Hydraulic Actuators
• Electro-hydraulic (HP), input signal 4 - 20 mA
For Electric Actuator
• Electronic (EO), input signal 4 - 20 mA
CV VALUES – FULL BORE SLEEVES
DIAMETER MM
OPENING %
0
10
20
30
40
50
60
70
80
90
100
1”
0
10
24
40
57
72
82
90
95
96
96
2.5”
0
65
162
273
382
479
557
612
645
657
657
3”
0
98
246
414
579
725
843
927
976
994
994
4”
0
154
384
647
905
1134
1317
1448
1525
1554
1554
1.25”
0
16
39
66
93
116
135
148
156
157
1554
1.5”
0
25
61
103
145
181
211
232
244
248
248
5”
0
241
601
1010
1414
1772
2059
2263
2384
2428
2428
6”
0
347
865
1455
2037
2552
2964
3258
3432
3497
3497
8”
0
616
1537
2586
3621
4536
5270
5792
6102
6216
6216
10”
0
963
2402
4042
5657
7099
8234
9050
9534
9713
9713
12”
0
1387
3459
5820
8147
10207
11857
13032
13729
13986
13986
14”
0
1888
4708
7922
11089
13893
16139
17738
18687
19037
19037
16”
0
2465
6150
10347
14483
18146
21080
23169
24407
24864
24864
Control valve PVE4AK15
CvQ
N1FP FR p
G=
in whichQ = Volume flow rateG = Specific gravityp = Pressure drop
N1 = Numerical constantFP = Piping geometry factorFR= Reynolds number
CONTROL VALVES FOR DEMANDING DUTIES
Larox control valve sizing is based on the IEC60534 standard(harmonized with ANSI/ISA S75 standards). The valve flow coefficientCv defines the control valve flow capacity i.e. the valve size (diameter).
Cv tables for conical sleeves and larger diameters are available upon request. Contact Larox Flowsys(www.larox.fi/flowsys/) for a complementary Larox control valve sizing program.
2”
0
39
96
162
226
284
329
362
381
388
388
PV PVE
SIZE
PV 3”
PV 4”
PV 5”
PV 6”
PV 8”
PV 10”
PV 12”
PVE 1”
PVE 1.25”
PVE 1.5”
PVE 2”
PVE 2.5”
PVE 3”
PVE 4”
PVE 5”
PVE 6”
PVE 8”
PVE 10”
PVE 12”
PN (PSIG)
15-350
15-350
15-350
15-240
15-240
15-150
15-75
15-350
15-350
15-350
15-350
15-350
15-350
15-350
15-350
15-240
15-240
15-150
15-85
A (INCHES)
7.87”
9.84”
12.20”
14.76”
19.69”
24.61”
29.53”
6.5”
6.5”
6.5”
6.5”
6.5”
7.87”
9.84”
12.20”
14.76”
19.69”
24.61”
29.53”
B (INCHES)
9.25”
10.43”
12.80”
15”
18.15”
21.46”
27.72”
4.92”
5.5”
7.09”
7.48”
8.27”
9.65”
10.94”
13.39”
15.75”
18.90”
22.44”
28.35”
WEIGHT fe (LBS)
31
35
51
57
103
187
220
18
22
26
29
37
59
73
106
165
262
354
466
WEIGHT al (LBS)
-
-
-
-
-
-
-
9
11
13
15
20
29
37
55
95
-
-
-
Dimensions subject to change without notice. Larger sizes and higher pressures also available.Dimensional drawings for higher pressure ratings available upon request.
7
MAIN DIMENSIONS
OPEN AND ENCLOSED BODY
Weights are for body and sleeve without actuatorwithout actuator..
E (INCHES)
3.94”
4.33”
5.31”
5.63”
6.69”
8.27”
9.84”
3.43”
3.54”
4.13”
4.72”
5.35”
6.10”
6.89”
8.27”
9.45”
11.61”
14.96”
17.52”
ManuValve
Larox Flowsys Oy • P.O. Box 338 • FI-53101 Lappeenranta, Finland • Tel. +358 201 113 311 • Fax +358 201 113 300e-mail [email protected] • www.larox.�
Automatic 12/06 USA
TYPE APPROVALP-11460
LAROX FLOWSYS INC. • 808 BARKWOOD COURT SUITE N, LINTHICUM, MD 21090
TEL. 410-636-2250 • FAX 410-636-9062 • E-MAIL [email protected] • WWW.LAROX.US
VALVESLEEVES
COMPANYPROFILE
THE SOLUTION YOU’VE BEEN LOOKING FOR
THE SOLUTION YOU’VE BEEN LOOKING FOR
LPP-DPUMP
THE SOLUTION YOU’VE BEEN LOOKING FORLPPPUMP
THE SOLUTION YOU’VE BEEN LOOKING FOR
LAROXPVEG
THE SOLUTION YOU’VE BEEN LOOKING FOR
MANUAL
VALVES
THE SOLUTION YOU’VE BEEN LOOKING FOR
FOR YOUR LOCAL LAROXREPRESENTATIVE
PLEASE CALL
1-888 - FLOWSYSOR
1-888-356-9797