Automatic Steel Rule Bender and Processor - Gerber Technology · 2017-05-12 · • The total...

2
optimum. Reach your Automatic Steel Rule Bender and Processor The MultiBender Rotary MR Series is the complete package for rotary rule processing. It features fast and highly- accurate performance for inline bending, cutting, lipping and notching with no wasted rule. Standard curved rule for 66" (1676 mm) shells (dieboard print circumference) is easily processed and available in 3 and 4 point rule thickness and rule heights up to 1.02" (26 mm). The MultiBender Rotary MR runs non- notched rule through the machine to make bridges and relief notches. The optional multi-cutting system processes straight rotary rule. This option provides straight cutting, lipping, multi-bridging and marks bending point locations. Also included is a conveyor system for moving pieces out of the machine. Features • The total solution for rotary diemaking. • Fully automated rotary rule processing system for bending, cutting, lipping and notching, all in line. • Fast, highly-accurate performance. • No rule waste.

Transcript of Automatic Steel Rule Bender and Processor - Gerber Technology · 2017-05-12 · • The total...

Page 1: Automatic Steel Rule Bender and Processor - Gerber Technology · 2017-05-12 · • The total solution for rotary diemaking. • Fully automated rotary rule processing system for

optimum.Reach your

Automatic Steel Rule Bender and Processor

The MultiBender Rotary MR Series™ is the complete package for rotary rule processing. It features fast and highly-accurate performance for inline bending, cutting, lipping and notching with no wasted rule.

Standard curved rule for 66" (1676 mm) shells (dieboard print circumference) is easily processed and available in 3 and 4 point rule thickness and rule heights up to 1.02" (26 mm).

The MultiBender Rotary MR runs non-notched rule through the machine to make bridges and relief notches.

The optional multi-cutting system processes straight rotary rule. This option provides straight cutting, lipping, multi-bridging and marks bending point locations. Also included is a conveyor system for moving pieces out of the machine.

Features

• The total solution for rotary diemaking.

• Fully automated rotary rule processing system for bending, cutting, lipping and notching, all in line.

• Fast, highly-accurate performance.

• No rule waste.

Page 2: Automatic Steel Rule Bender and Processor - Gerber Technology · 2017-05-12 · • The total solution for rotary diemaking. • Fully automated rotary rule processing system for

NOTE: Configurations vary according to options selected.Specifications are subject to change without notice.

MultiBender Rotary MR Series is a trademark of Gerber Technology LLC.

© 2017 Gerber Technology LLC. All rights reserved.

Gerber Technology24 Industrial Park Road WestTolland, CT 06084 USA

T O L L F R E E (USA)800.826.3243

T E L E P H O N E (International)+1.860.871.8082

www.gerbertechnology.com

Form No. 05112017

Computer (included) Current generation PC with 17" LCD monitor

Dimensions 73" W x 50" D x 87" H (1860 mm x 1280 mm x 2200 mm)

Power Requirements 220 VAC, 3 Phase, 50~60Hz

Weight 2,000 lb. (910 kg)

Technical Specifications:

Technical specifications subject to change.

Unknifed rotary dieboard

Bending samples

Non-notched rule Pre-notched rule

Straight Cutting

ROTARY MR MULTIBENDER

Overall Dimensions

50" (1270 mm)

73" (1854 mm)

Knifed rotary dieboard