AUTOMATIC MEDIUM SPEED LINEAL 4 AND 6 CORNER FOLDER · Automatic High Speed Lineal 4 and 6 corner...

AUTOMATIC MEDIUM SPEED LINEAL 4 AND 6 CORNER FOLDER

MODELO: PACKGLUED VI-CS

[email protected](33) 2469 2202

CS PARAMETERS

ModelProcessed Materials

Carton board max.Corrugated flute type

CapabilitySpeed max.

Inching speedThickness of folded box max.

Blank widthTotal Power

Compressed airAir compressor capacity

Air tank capacity Dimensions & weightLength*Width*Height

Net Weight

650CS

650 MMA, B, E

350 m/min10 m/min

12mm650 mm22.5kw6 bar

10 m³/h60 L

13*1.4*1.8m5T

800CS

800 MMA, B, E

350 m/min10 m/min

20mm800 mm23.5 kW

6 bar10 m³/h

60 L

16.5 *1.4*1.8m6.6T

1100CS

1100 MM A, B, E

350 m/min10 m/min

20mm1100 mm23.7 kW

6 bar10 m³/h

60 L

16.5*1.7*1.9m6.8 T



CS FEATURES INTRODUCTION

Paper feeding department

•Rail width can be h orizontal ly adj usted and set by seven pieces 30mm thickened feeding belt and 10mm metal board.• Operators can operate feeder switch in any regional.

Embossing drive wheel guide the feeding section belt, side feed gates in the right and left are adjustable ac-cording to the products.

•Vibration device coordinate with motor which helps machine consecutive and automatic feeding quick and simply. Feeder section can stack 400MM height paper board.

Aligner section

•The paper board sent from feeder section will be co-rrected by aligner section to ensure transmission accura tely.

• Pressing drive pressure can be adjusted up and down to accommodate different paper board thickness.

Pre folding section

•Special first folding line pre fold 180°. Third line 165 which perfectly meeting the requirements of automatic pac-kaging industry.

•Independently motorized motor control simultaneous feeding mode with the main motor.

• Feeder section equipped with three pieces feeding knife, adjust the asymmetrical lengths as per the box sample.



CS FEATURES INTRODUCTION

Lower gluing tank

•Lower gluing tank is large volume.

•Easy to remove and clean.

•Electronic upper gluing system by guns.

Folding and closing

•The Second and fourth fol ding line 180°

•Folding and closing section transmit from right and left side ,the belt speed can be adjusted separately and co-rrect the way of box running to ensure straightly delivery.

Trombone section

•Up and down belt can be adjusted separately.

•Equipped with photo electronic counting device and kicking paper device, which can press the paper after accounting and make it easy to pa ck . Also e quipped with feeding paper inspection device.



Transmission

•Equipped with special additional sponge belt for the press of boxes valley part.

•Upper section moves back and forward, allowing for di-fferent box length.

• Upper section moves back and forward, allowing for different box length.

4 and 6 corner device

•Motorized and untimed electronic back folding system with intelligent servo motor technology.

Spraying System

•Equipped with three guns, convenient in the production of 4/6 corner box and various special shaped box, gluing quickly and accurately sizing.



SAMPLES PARAMETERS

Straight-line boxModel

AB

C (Min)

Crash lock bottom boxModel

AB

C(Min)D(Min)E(Min)

Tapered boxModel

AB

C(Min)D(Min)E(Min)

4 corners boxModel

AB

C(Min)D(Min)E(Min)

6 corners boxModel

AB

C(Min)D(Min)E(Min)

650Type75-65060-650

35

650Type160-65090-900

203040

650Type160-65090-650

403520

650Type160-500120-65020-200

9080

650Type250-650120-80020-200

9080

800Type75-80060-800

35

800Type160-80090-900

203040

800Type160-80090-800

403520

800Type160-800120-80020-200

9080

800Type250-800120-80020-200

9080

1100Type75-110060-800

35

1100Type160-110090-900

203040

1100Type160-110090-1100

403520

1100Type160-1100120-100020-200

9080

1100Type250-1100120-80020-200

9080



STRAIGHT-LINE TYPE

CRASH LOCK BOTTOM TYPE

FOUR CORNERS TYPE

SIX CORNERS TYPE



CONFIGURATION LIST

Main Board

• Mail Wall plate 14 mm which is International standard steel plate processing cold and hot treatment

Conveying motor

• Qiaobang-Made in China

Touch Display

• Taiwan-WEINVIEW

Main Motor

• ZHONGLONG-Made in China

PLC controller

• Taiwan-FATEK

Contactor

• France-Schneider

Board for conveyor

• Conveyor board 1 0 mmwhich is International stan-dard steel plate proces-sing cold and hot treat-ment

Converter

• German-Rexroth

Circuit Breaker


PACKGLUED VI GS SERIES

Automatic High Speed Lineal 4 and 6 corner Folder

[email protected] www.packmach.mx

Main Board Mail Wall plate 16mm

which is International standard steel plate processing cold and hot treatment

Main motor SIEMENS Germany

Circuit Breaker France Schneider

Conveying motor Qiaobang

Contactor France Schneider

Touch Display Taiwan weinview

Board for conveyor The bending part 8mm


Converter Germany Rexroth

PLC controller Taiwan FATEK































CONFIGURATION LIST

Intermediate relay


Photo electricity

• KEYENCE

Conveying belt

• Switzerland-Habasit

Chrome bar

•Through quenching-tempering

Switch power supply

• Changxin

Base belt

• Japan-NITTA

Transmission bearing

• NSK-Japan

Press Switch+ Remote controller

• Telecrane

Button


Feeding Belt

• Japan-NITTA

Bearing

• NSK-Japan

Mound layer, roller

• Special section bar, hot processed




Button France Schneider

Intermediate relay France Schneider

Photo electricity KEYENCE

Transmission bearing NSK（Japan）

Bearing NSK（Japan）

Conveying belt Switzerland Habasit

Chrome bar Through quenching-

tempering

Press Switch+ Remote

controller Telecrane

Switch power supply Changxin

Base belt Germany Siegling

Feeding Belt Japan NITTA

Mound layer, roller Special section bar,

hot processed

PACKGLUED VI CS SERIES

Automatic Medium Speed Lineal 4 and 6 corner Folder



tempering








Telecrane

Mound layer, roller Special section bar, hot

processed



Base belt Japan NITTA











tempering

Press Switch+ Remote

controller Telecrane


Base belt Germany Siegling


Mound layer, roller Special section bar,

hot processed

PACKGLUED VI CS SERIES

Automatic Medium Speed Lineal 4 and 6 corner Folder



tempering








Telecrane

Mound layer, roller Special section bar, hot

processed



Base belt Japan NITTA

AUTOMATIC MEDIUM SPEED LINEAL 4 AND 6 CORNER FOLDER · Automatic High Speed Lineal 4 and 6 corner...

Documents

Transcript of AUTOMATIC MEDIUM SPEED LINEAL 4 AND 6 CORNER FOLDER · Automatic High Speed Lineal 4 and 6 corner...