Automated Automated DAG PROGRAMMERDAG PROGRAMMER

Option 1 : Licence*

300 €**

Option 2 : Licence and Bar Code Reader

SetDAG Code required ***

465 €**

* All bar code reader that you have must be sent to DAG System for the parameters setting (as possible)

** 30€/year for the SetDag licence

*** 1 SetDAG Code per PC - 100€/extra PC

SetDAG Code required ***

Automated and SecureAutomated and Secure

TIMING SOLUTIONSTIMING SOLUTIONS

Already in your kit

N°3

N°1

N°2

Step 1 : Reading of the DAG by the Bar Code Reader and the DAG PROGRAMMER

+

TIMING SOLUTIONSTIMING SOLUTIONS

Step 2 : Writing of the DAG on the DAG PROG

Current Writing Successful Writing

DAG PROGRAMMER and the bar code Reader ensure a optimal security for your programmation

The bib n°1 (composed by a DAG) is read by the bar code reader and is recorded as the DAG n°1 and so on…

TIMING SOLUTIONSTIMING SOLUTIONS

DAG PROGRAMMERELECTRICAL SPECIFICATIONS

Operating frequency 13.56 Mhz

Decode Capability V6

Power 80 mW

Trough a port USB

Operating Current 140 mA

Communication parameters Virtual Com PORT 38400,8,n,1

Communication Interfaces USB, keyboard emulation

ENVIRONMENTAL SPECIFICATIONS

Operating - 4F ° to + 100 °F

Storage Temperature - 40 °F to + 150 °F

Power Supply

OPERATIONAL SPECIFICATIONS

Light Source Visible Laser diode 650 nm

Laser Power 1.1mW

System Interfaces RS232 light pen emulation, keyboard Wedge, stand alone keyboard, USB, laser emulation

Autodiscriminated all standard 1D bar code including RSS-14

Decode Capability

ELECTRICAL SPECIFICATIONS

Input voltage 0.25 V ( 5VDC)

Operating Current 275 mA typical @ 5VDC

ENVIRONMENTAL SPECIFICATIONS

- 4°F to 104°F

- 40 °F to +140 °FStorage Temperature

Operating

Power 1.375 W

Bar Code Reader

TIMING SOLUTIONSTIMING SOLUTIONS