Autobody Tools and Equipment 2003 - The Graphic Image
Transcript of Autobody Tools and Equipment 2003 - The Graphic Image
Pro StepThe
Innovative autobody tools and equipment2003Autobody Tools
and Equipment
The Pro StepSee page 15
Visit our website at www.steckmfg.com
See page 17
See CompleteIndex on
Back Cover
Never put it away......you’ll need it every day!
Look inside for these exciting NEW products from STECK!
Steck makes unibody & framemeasuring E-Z !
E-Z C Laser MeasuringWhen the BigEasy™ is Just Too Long!LittleEasy™!
See page 3Only 29” long
Finally a Convenient Door Aligning Tool
See page 8
E-Z Store Door Alignment Tool
#32533$7.27
#32545$9.04
#32527$5.76
#32526$5.76
#32551$8.63
#32554$8.63
#32552$8.63
#32553$8.63
#32565$23.99
Innovative autobody tools and equipment
Steck Manufacturing Company, Inc. • 1-800-227-83252
LUG OFF!!Lug Nut Remover
Set of all 4 with Carrying Case - #71240 - $83.59Set of 2 (#71201 & #71205) - #71200 - $41.77
3/4” Lug Off - #71202 - $25.0413/16” Lug Off - #71201 - $25.04
1” Lug Off - #71205 - $25.041-3/16” Lug Off - #71207 - $25.04
NO KEY?
RemoveLocked
or DamagedLug Nuts Without a Key ■ Now 4 sizes for
expanded coverage■ Also works on hex nuts■ Lug nuts are usually
reusable■ Tapered left-handed
threads grip straight ortapered nuts
■ Use 1/2" Drive-Impactor Breaker Bar
CarryingCaseincludedwithpurchaseof all4 sizes! Warranty: One Year Against
Breakage. Some wear will occurto threads but will not affect thefunction of the sockets.
Lockout Tools Kit
Now availablewith HeavyDuty PlasticCarrying Case
Unlock over 98% of domestic and imported cars
■ Unlock cars in seconds without damage■ Unlock cars with digital and electric locks■ 32 page instruction book lists over 100 makes and
models of cars with specific unlocking instructions.
Lockout Tools Kit (in plastic pouch) - #32700 - $73.13Lockout Tools Kit with Heavy Duty Plastic Case(includes Knee Saver in lid) - #32800 - $94.04
Innovative autobody tools and equipment
Steck Manufacturing Company, Inc. • 1-800-227-8325 3
GLOWSBRITE YELLOW
IN THEDARK!
New BigEasy™ GLO / Easy Wedge Kit!
Unlocks All Carsfor Under Half
the Price!
Complete Lockout Tool KitKit Includes:Big Easy™ GloActuates the lock button, door handle or electric locks on 98% of all carsand trucks. Fast, easy, with no training. And it glows in the dark!
Easy WedgeControlled opening of the car door for insertion of the BigEasy™.
Lock Knob LifterLifts traditional and late model Japaneselock knobs at the top of the door.
BigEasy Glo/Easy Wedge/Lock Knob Lifter Kit - #32955 - $ 64.95Original BigEasy (does not glow)/Plastic Wedge/Lock Knob Lifter Kit - $ 36.00
#32922 - $ 26.95
#32930 - $ 7.66
■ Perfect for Japanese imports!■ Works on some Pickup trucks■ Only 29” long
When the BigEasy™ is Just Too Long!LittleEasy™!
LittleEasy - #32908 - $ 14.95
56” Long
Innovative autobody tools and equipment
Steck Manufacturing Company, Inc. • 1-800-227-83254
The Iron Hand easily pulls closed end rails using theexisting isolator shock absorber. This wide flange tool alsorealigns door jambs, rocker panels and pillars withoutadditional damage to the vehicle.
■ Iron Hand installs quickly on shock absorbers for pulls in any direction(read instructions carefully).
■ Iron Hand adjusts to pull most rocker panels, door jambs and pillars.
Iron Hand Tool - #60002 - $161.99
The Iron Hand
U.S. Patent #5,156,037
■ Heat treated alloy steel (5000 pound max pull!)■ Teeth keep tool from slipping!■ Narrowed edge allows easy entry between dash and hinge pillar!
Pull Hinge Pillar Without Removing Dash!A-Pillar Puller
A-Pillar Puller - #20045 - $99.95
Handy for many other pulling applications!
Pogo II■ One hand operation.■ Core supports repaired quickly.■ Hook bolt heads, flanges, anywhere...■ Fits in your toolbox (overall length 18-3/8”)
Fast Leverage Pulling
Pogo II - #20099 - $57.45
Pat'd.
Quarter Puller & Q.P. II■ Hooks above the lip of the wheel opening.■ Two curvatures (one on each side) will fit almost all cars.■ Easier and faster than clamps or jacks.■ 3000 lb. max. pull■ Q.P. II with 6” bars for smaller openings
Quarter Puller - #20022 - $50.87Q.P. II - #20033 - $47.69
Pulls Rear Quarter and Wheel Well, 12” Bars
Quarter Puller
Q.P. II
CALL FORFREE VIDEO!
1-800-227-8325
HEAVY DUTY!
22 PoundClamp!
Innovative autobody tools and equipment
Steck Manufacturing Company, Inc. • 1-800-227-8325 5
Super Scraper - #71510 - $15.17
Super ScraperWorks Like a Chisel■ Tough plastic handle can be hit with a hammer!■ Resharpen when needed with a file!
Set of 3 - #71400 - $60.85(in plastic case)1/8” - #71401 - $23.293/16” - #71403 - $23.291/4” - #71405 - $24.31
Pop* Rivet Stoppers!Drill out Pop Rivets Fast!■ Stops pop rivets from spinning while you drill them out■ Teeth bite rivet (hardened steel)■ Saves time and aggravation
*POP is a registered trademark of Emhart Industries, which has not sponsored nor approved this tool.
■ Slide tool left or right under the molding until it hooks a retaining clip
■ Then just rock the tool with a twist of the wrist
■ Heat-treated, high-carbon steel
Universal Molding Release Tool - #21500 - $6.26
■ Grips firmly while supporting the trim pad■ Prys out the clip without damage■ Prys against hidden surfaces, will not mar exposed surfaces■ Heat-treated, high-carbon steelTrim Pad Removing Tool - #21700 - $7.09
■ Fits most antenna bezel nuts - domestic and foreign
■ Simple and compact. Compared to a socket set, it’s easier to carryand use. It also costs much less!
■ Rugged steel construction for many years of use
Antenna Wrench - #21600 - $20.86
Universal Molding Release Tool
Trim Pad Removing Tool
Antenna Wrench
Innovative autobody tools and equipment
Steck Manufacturing Company, Inc. • 1-800-227-83256
■ 1. Molding Remover
■ 2. Windshield Wiper Wrench
■ 3. Clip/Wire Starter
■ 4. Door Weather Strip Clip Remover
■ 5. Trim Pad Remover
Made oftempered
spring steel.
10 Tools in One!
10-In-One Trim Tool - #21510 - $15.63
■ 6. Door Handle Clip Remover
■ 7. Headlight Spring Tool
■ 8. Windshield Molding Clip Release
■ 9. Door Clip Remover
■ 10. Panel Seam Clean-Up
■ Fast door handle removal
■ Clip stays on handle for easy reinstallation
Door Handle Tool - #16000 - $4.38
“The Original”
■ Clamps panels in place for welding and panel bonding■ Small profile allows door to be closed for alignment
check before welding■ Constructed of Heat-Treated High-Carbon Steel(Card of 5) Mighty Midget Panel Clamp - #20100 - $10.40 Door
Rocker Panelor B-Pillar
Mighty Midget Panel Bonding Clamp
3” x 4” Spreaders, 50 to a Box - #35760 - $ 14.953” x 5” Spreaders, 50 to a Box - #35760 - $ 17.95 #35760
Spreaders in a Handy Dispenser BoxMade in the USA using Virgin P. E. Colored Yellow■ Hangs on the Wall!■ Visual Supply Check!■ Easily Dispenses One Spreader at a Time!■ Saves Lost Time Looking for Spreaders!
10-In-One Trim Tool
Door Handle Tool
Remove E-clipfrom top ofroller pin.
CompressSpring.
REMOVEROLLERPIN!
1
2
1
2
3➠
3
Innovative autobody tools and equipment
Steck Manufacturing Company, Inc. • 1-800-227-8325 7
E-Z Rest Door HangerThe E-Z Rest Door Hanger enables a single person to quickly removeand/or install vehicle doors. The padded, removable side rails allow foraccurate positioning of door, and the easy on/off design quickly adaptsto most floor jacks with removable saddles.
■ Reduces Labor Time
■ Padded, Removable Side Rails
■ Easy On/Off Design and Fully Adjustable
■ Quickly Adapts to Most Floor Jacks with Removable Saddles
■ Hang Bumpers, Store Glass, Many Other Uses
■ Fits Jacks with Saddle Hole Dimensions of 1.17"-1.19" (30mm)
E-Z Rest Door Hanger - #21870 - $104.49Car JackNot Included
■ Compresses spring for easy, safe removal■ Sides safely enclose spring■ Deep reach version for GM B-Body■ Heat-treated, high carbon steel
GM Door Spring Tool - #21900 - $14.80Light Truck Door Spring Tool - #21910 - $16.68
■ Compresses spring for easy removal of roller pin■ Heat-treated, high carbon steel
S10/S15 Rear Door Spring Tool - #21915 - $ 20.55 End canbe usedto removeloosenedhinge pins.
Safest Tool Available for Coil Springs in GM Doors
Fast • Simple • Safe
Makes Door Removal A One Man,Ten Minute Job!
For RemovingHollow HingePins
For RemovingSolid Pins
■ Removes hinge pins from welded door hinges(for both solid and hollow hinge pins)
■ For all cars with welded door hinges
■ Includes Door Spring Removal Tool
Door Removal Kit - #21830 - $78.36
Door Removal Kit
GM Door Spring Tool
S10/S15 Rear Door Spring Tool
Innovative autobody tools and equipment
Steck Manufacturing Company, Inc. • 1-800-227-83258
Door Hinge “Pin Popper”■ Removes door hinge pins FAST■ Drives out even stubborn hinge pins■ Direct impact■ Clearance for door panels■ Works on all GM cars with removable hinge pins■ Includes PIN PULLER to remove loosened pinsDoor Hinge Popperwith Pin Puller - #21835 - $26.09
Includes PIN PULLER
■ Unconditionally guaranteed for one year!
Door Aligning Bar - #21840 - $50.87
The Fastest Means of Aligning Doors with Welded Hinges
Innovative autobody tools and equipment
Finally a Convenient Door Aligning Tool■ Saves space. Fits easily into your tool drawer.
No long, heavy bar to store!
■ Uses your breaker bar for leverage.
■ Save time. You won’t have to hunt for theshop tool.
E-Z Store Door Aligning Bar - #21845 - $24.95
Door Aligning Bar
Collision force to one frontfender often travels throughthe hood to push out the topof the opposite fender. TheFender Fixer rolls that fendertop back into shape in justminutes.
Fender Fixer - #20055 - $52.22
1 2 Place chisel point of toolinto corner of bolt flangeof fender. Adjust strap. 3 Lifting motion rolls fender
into desired location.Hammer top of tool to set.
Hook strapbelow fender.
FenderFixer
E-Z Store Door Aligning Bar
Innovative autobody tools and equipment
Steck Manufacturing Company, Inc. • 1-800-227-8325 9
“The Original” Pull Rod Set■ Super tough alloy steel is precisely heat-treated for maximum strength.■ Every Steck Pull Rod and Pick Pull is factory tested
under a 500 pound (228 kg) load.■ Vinyl coated handle is comfortable to use. Use two
at a timefor pulling
Card of 2Steck Pull Rods#20007 - $11.94
Card of 2Steck Pick Pulls#20008 - $11.94
Pull Rod Set - #20000 - $36.02Includes:
(4) Pull Rods(2) Pick Pulls(1) Stainless Steel Straight Edge(1) HS Split Point Drill Bit(1) Instruction Sheet
E-Z Strip Molding Tool
■ Saves Body Moldings■ Reduces Body Damage■ Saves Time and Materials■ Screws holding blade are now coined
to hold blade tight.
When used with an air hammer, removes adhesive body moldingsquicker and easier than ever before. With proper use, the E-Z Stripsaves moldings without body damage.
U.S. Patent#5,301,429
IMPROVED!1 Year Guaranteeon Shank!
Hose Magnet
■ Keep Your Air Hose In Reach!■ Save Your Back From Stooping!■ Saves Time and Money!
Super Strong Magnet Attaches Directly to YourAir Hose at the Fitting!
Hang Your Hose On the Wall... ...Don't Let It Fall On The Floor!
■ Great for paintless dent removal■ Holds door open while you hammer, pull, grind, sand or paint.■ For doors and deck lids■ Holds solid■ Fits any size latchDoor Jammer - #17000 - $23.47
E-Z Strip Molding Tool - #21540 - $26.09
#33250 Hose Magnet - $8.07
Door Jammer
Innovative autobody tools and equipment
Steck Manufacturing Company, Inc. • 1-800-227-832510
Ford Headlight Retaining Clip Tool
■ Two Fingers Spread Locking TabsTo Release Them
■ Tang Of Tool Lifts Back Of Clip To ClearLocking Tab On Panel
■ Removes Clip Without Damage Even InConfined Spaces
Plugweld PliersCopper alloy backing plate prevents burn thru (weldwill not stick to the copper alloy). Plugweld Pliersallow you to turn up your heat for better penetrationwithout burn thru, even if you have a pilot hole throughthe back panel.
Plugweld Pliers - #23230 - $36.54
GRAY SIDE – Soft & PliableFor Sanding Irregular Surfaces
BLACK SIDE – StiffFor Faster Sandingon Curved Surfaces
2 1/2" x 5 5/8"
5 1/2 in. Tear Drop
2 1/2 in. Mini Tear Drop
■ Comfortable in your hand
■ Rounded edge for contours
■ Square edge makes excellent squeegee
D55 Sanding Block - #35500 - $10.40
Do You Burn Thru Thin Panels?Well Stop It!!! With...
Double Density & Tear DropSanding BlocksWet or Dry Sanding
D55 Sanding BlockYour Product Idea
Could Appear Here!Call 1-800-227-8325
Ford Headlight Retaining Clip Tool - #21550 - $20.86
1
2
3
4
Tilt Tool To Engage Tang In Clip
Lift Tool Handle To Spread Locking Tabs
Lift Back Of Clip To Clear Locking TabOn Panel
Pull Clip Out
Opposite End OfTool Reinstalls The
Same Clip InSeconds
Double Density Sanding Block - # 35300 - $6.425-1/2" Tear Drop Sanding Block - # 35356 - $8.632-1/2" Mini Tear Drop Sanding Block - # 35353 - $6.42
2” dia.
Innovative autobody tools and equipment
Steck Manufacturing Company, Inc. • 1-800-227-8325 11
DA Mini Sander - #35220 - $41.77Sandpaper Assortment - #35230
(5 ea. 40, 80, 180 & 320 grit) $8.31Spot Finishing Kit - #35240
(15 & 9 Micron Disks, & Buffing Pad) $8.31
40 Grit (50/pkg) - #35221 - $20.8680 Grit (50/pkg) - #35223 - $18.77
180 Grit (50/pkg) - #35225 - $18.77
320 Grit (50/pkg) - #35227 - $18.779 Micron (50/pkg) - #35228 - $18.77
15 Micron (50/pkg) - #35229 - $18.77
Sandpaper Packages:
Spec-Out Nib File■ Removes Runs & Dirt Nibs■ Honed tips of teeth shave without digging in■ Available in coarse or fineSpec-Out Nib File (Coarse) - #35250 - $16.99Spec-Out Nib File (Fine) - #35260 - $16.99
11/4SPEC-OUT
Finish
BaseCoat
ClearCoat
Defect
Super Stripe StripperIt Strips Stripes!■ Works best at low RPMs, even on cordless drills! (1500 RPM max.)
■ Removes pin-striping tape
■ Removes double faced tape from body and side mouldings
■ Works faster and lasts 4 times longer than discs requiring high RPMs
Super Stripe Stripper - #35400 - $21.90Disc Only - #35405 - $16.68
Works great for removing double faced tapefrom body and side mouldings!
Sure Grip Trim Clip Plier■ Won’t break clips■ Works faster and easier■ Works on trim pads, hood insulation, etc.
US Patent# 5, 611, 519
Sure Grip Trim Clip Plier - #21720 - $25.32
“The DA for Tight Spots”DA Mini Sander
Fits Into YourRight Angle Grinder
Perfect for Working in Tight Spaces
■ Sand Door Jambs■ Plastic Repair■ Works well in any small space■ Velcro® backing pad allows you to
reuse sandpaper■ Comes with free sandpaper■ Spot finishing kit available with
1000, 1500, 2000 grit sand paperand buffing pad
Innovative autobody tools and equipment
Steck Manufacturing Company, Inc. • 1-800-227-832512
The Bumper Tree - #35800$176.68 (casters now included)
Fender & Long BumperCover Kit - # 35850 - $20.86
TILT FEATUREallows you to set yourown working heightand angle.
■ Tilt while painting to give easy access to top, bottom, front,back and wrap-around ends.
■ Openings in covers can be painted from the front and backto assure complete coverage.
Complete Coverage...No Missed Spots!
Holds Spoilers, Mirrors, Etc.!
Sand, Mask, Prep & PaintAll on theBumper Tree!
Bumper Cover issecured by chains.Chains are adjustedusing convenientchain slots.
SUPPORT RAILS SWIVELto fit any bumper cover.
NOW INCLUDESCASTERS!
■ Allows you to paint all the angles.■ Powerful magnets to attach to wall of booth,
or hang it up for drying!
Paint ‘n Stick - #35660 - $20.25 Side ViewMirrorHolder
Two PowerfulMagnets!
Holds to anymetal surface for
drying.Side View Mirror Holder
U.S. Patent Des. 399111
Paint ’n Stick
IT MOVES!
Innovative autobody tools and equipment
Steck Manufacturing Company, Inc. • 1-800-227-8325 13
■ Panels load easily and quickly!■ Center Post design allows access to edge,
bottom and both sides of the panel!■ Paint Panels, Jambs, and Car all at one time!■ Save hours of dry time!■ Hold one or two panels securely!
Part Number 35910 (Tailgate Holder only)$91.30
Paint it all in oneoperation, perfect jams.
Panel Tree...for Painting!
Panel Tree Accessory!Tailgate Holder
PROBLEM: Lifting, flipping, painting andwaiting on tailgates.
SOLUTION: The Tailgate Holder holdstailgates to allow paintingboth sides at once, whilepainting other parts on thesame Panel Tree.
Part Number 35900$349.95
Patent Pending
Fender/HoodCasters for easymobility, wide basefor stability.
Innovative autobody tools and equipment
Steck Manufacturing Company, Inc. • 1-800-227-832514
Door Lock Covers, Set of 12 - #35730 - $ 9.49
Rim Maskers for Autos & Trucks, Set of 4 - #35732 - $ 23.77
Spray Gun Hanger
Gun Slinger withSiphon Feed Gun
Gun Slinger withGravity Feed Gun
A Bench Anywhere You Need It!
Portable BenchHeavy Duty Frame, Foam#35755 - $ 69.95 #35755
A Tool Holding Coverfor Your Portable Bench!
Tool Sling - #35757 - $ 19.95
(Portable benchnot included)
Door Lock CoversSave Time Masking! Fits Many Cars!
Rim Maskers■ No Need to Remove Tire (no overspray)!■ Metal Ring Adjusts for All Wheel Sizes!■ Set of Four!
Paint Wheels While Still on the Tire! For Autos and Trucks
■ Bright Yellow Powder Coat Finish■ Saves Warehouse Space■ Saves Shipping Costs!
■ Easy. Installs in Seconds withHook & Loop Strips
■ Folds Flat for Storage■ Holds Tools and Parts During
Assembly and Dissassembly
Comes dissassembledto save warehousespace and shippingcost.
Seven Steck Benches fit in the space of one!
■ Mounts in your spray booth
■ Holds siphon feed or gravity feed
■ Convenient when painter needs hands free
Gun Slinger (Pkg. of 2) - #35650 - $10.92
Gun Slinger
Heavy Duty Portable Bench
Tool Sling
Pro StepThe
Innovative autobody tools and equipment
Steck Manufacturing Company, Inc. • 1-800-227-8325 15
TEE TIPFits small holes on three sides.Designed for measuring from
holes in body panels.
1
2
10
20
30
40
50
INCH
METRIC
3/4" x 16 Foot Tape
HOLESLIDE
For Hole-to-Hole
MeasurementsTEE TIP
Hooks into smallholes on 3 sides
POWERFUL MAGNETS ON FOUR SIDES
Hook It, Pull It, Stick It!
1 210 20 30 40 50
MEASURE 'N STICK
HOLE SLIDEMOVES
THREE WAYS
MEASURE 'N STICKAUTOBODY TAPE MEASURE
Never put it away, you’ll need it every day!
■ Heavy Duty (1000 lb. cap.) Platform (32” x 16”)■ Foam Bumpers Protect Vehicle Finish■ Spring Loaded Retractable Wheels, You Can Push It With
Your Foot.■ Extra-Wide (23”) Base Rails for Stability■ Height Adjustable from 61/2” to 221/2”■ Heavy Duty (Weight - 45 lbs.) Construction
The Pro Step - #20350 - $ 135.00
■ Hands free measuring■ Continuously monitor your pull■ Measure without an assistant■ For Bodymen, Insurance Adjusters, Fabricators
Hands Free MeasuringWiththe
Measure’n Stick - # 36000 - $52.99
STANDARD TIPtoo wide for small holes
1
2
10
20
30
40
50
ForHole-to-Hole
Measurements
Innovative autobody tools and equipment
Steck Manufacturing Company, Inc. • 1-800-227-832516
Repair, sand & paint with bed on the SpaceSaver.
Raise bed. Insert SpaceSaver. Pin SpaceSaver legs into locked/down position.Secure SpaceSaver to frame.
Adjust SpaceSaver height.Replace truck bed. Secure bed to SpaceSaver
Pick-up Bed StaysWith The Truck!Bed won’t take up
another bay...
When The Truck MovesThe Bed Moves With It!
No extra time spentmoving separate bed...
Truck And Bed Go IntoThe Booth Together!
Makes blending oroverall painting easy...
Bed Attachment Frame Attachment
■ Bed and truck frameattach securely to theSpaceSaver
■ Folds flat for storage!■ Height adjusts easily!SpaceSaver 2000#35880 - $253.70
■ Lift pick-up truck bedssafely and easily
■ Lifting bracket adjusts toevenly distribute weight
SpaceSaver Bed Lifter#35885 - $253.70
■ The machined Disc fills the Insulator opening to eliminate distortion
■ No need to remove the radiator support!
NEW!
NEW!
NEW!
Simple to use:1. Remove the lower control arm nut.2. Drive bolt back about 1/2”3. Slide “key hole” plate over bolt head.4. Assemble Puller using one of the special nuts provided.5. You are ready to pull!Lower Control Arm Bracket Puller Set - #63600 - $152.20
Simple to use:1. Remove body mount insulator.2. Insert the correct “Insulator Disc” from chart.3. Assemble disc and pulling plate/clevis with bolt provided.4. You are ready to pull!Radiator Support Tab Puller Set - #63500 - $152.20
NEW!
SpaceSaverBed Lifter
Lower Control Arm Bracket PullerThe Easy Way to Pull Without Removingthe Lower Control Arm or Bolt
Radiator Support Tab PullerChevy Truck Bumper Alignment Made Easy!
Innovative autobody tools and equipment
Steck Manufacturing Company, Inc. • 1-800-227-8325 17
The CO-K Expandable Jaw Tool Kit
The #62300 Expandable Jaw Tool Kit (The CO-K Kit) enables you topull frame rails on over 60 car models.■ Kit consists of CO-1, C1-1, G1-1, U1-1, and SE-1 Swivel Eye■ Fits all the cars listed belowCO-K Expandable Jaw Tool Kit - #62300 - $405.95
88-93 Dynasty (rear)85-89 Lancer (rear)90-92 Monaco (front & rear)87-89 Shadow (rear)90-94 Shadow (front & rear)89 Spirit (rear)90-95 Spirit (front & rear)PLYMOUTH89 Acclaim (rear)90-95 Acclaim (front & rear)92-94 Duster (front & rear)90-94 Laser (front & rear)81-89 Reliant (rear)87-89 Sundance (rear)90-94 Sundance (front & rear)CHRYSLER90-93 Imperial (rear)84-95 Le Baron (J Body) (rear)90-94 Le Baron (A Body) (front & rear)83-93 New Yorker (rear)EAGLE88-89 Medallion (front & rear)88-92 Premier (front & rear)90-94 Talon (front & rear)
CHEVROLET85-94 Cavalier (rear)85-90 Celebrity (rear)87-95 Corsica/Beretta (rear)90-00 Lumina (rear)95-99 Monte Carlo (rear)PONTIAC87-99 Bonneville (rear)85-98 Grand Am (rear)88-96 Grand Prix (rear)85-91 Pontiac 6000 (rear)85-94 Sunbird (rear)OLDSMOBILE92-98 Achieva (all) (rear)85-87 Calais (rear)88 Cutlass Brougham (rear)88-91 Cutlass Calais (rear)85-96 Cutlass Ciera (all) (rear)88-97 Cutlass Supreme (rear)86-99 Delta 88 Royal (rear)85-88 Firenza (rear)85-96 98 Regency (rear)88 SportCoupe/ES Sedan (rear)85-93 Toronado (front & rear)
BUICK85-96 Century (rear)86-96 Le Sabre (rear)85-96 Park Avenue (rear)88-91 Reatta (front & rear)88-96 Regal (rear)85-93 Riviera (front & rear)85-89 Skyhawk (rear)86-00 Skylark (rear)85-87 Somerset (rear)CADILLAC85-88 Cimarron (rear)91 Commercial Chassis (rear)85-93 DeVille FWD (rear)94-99 DeVille/Concours (front & rear)86-99 Eldorado (front & rear)85-93 Fleetwood FWD (rear)85-87 Fleetwood Limo FWD (rear)88-93 Fleetwood Sixty Spl (rear)92-99 Seville (front & rear)DODGE81-89 Aries (rear)84-89 Daytona (rear)90-93 Daytona (front & rear)
Steck makes unibody & framemeasuring E-Z !
E-Z C™ Laser MeasuringInnovative autobody tools and equipment
E-Z C™ Laser Measuring - #36300 - $ 1995.00
The CO-K Kit Fits All These Cars!
■ Provides laser accuracy■ Attach to YOUR centerline gages for
E-Z measuring!■ There is NO training required...
and NO math calculations!■ The laser hits the target and shows what to pull.■ The laser also shows your progress
and completion!
Patent #6,347,457
Innovative autobody tools and equipment
Steck Manufacturing Company, Inc. • 1-800-227-832518
Check-Mate Measuring System
The Check-Mate will work withnearly any bench or pulling systemavailable. It attaches directly tothe pinch-welds of the car or tothe ramps of your drive-on bench.It measures up to ten points under thechassis simultaneously as well as the strut towerdimensions for length, width and height. The upperbody dimensions (roofs, B-pillars, side panels, etc.)can be measured with the Upper Body Attachment.
Direct reading tapes (Metric and English) allow forfast set-up. The Check-Mate is constructed ofspecially designed, rugged aluminum extrusionsto last forever.
FREETRAINING CLASSES
SEE PAGE 19
■ Hole centers eliminate math■ Free Factory Training
(Two Day, Hands-on TrainingClass, see page 19)
■ KLM or any other dimensionmanuals can be used to set upthe Check-Mate
■ Aluminum clamps andblocks are color coded for easyidentification
■ Full 12 foot main frame■ Metric and English graduations■ Steck quality at half the price
of competitivemeasuring systems
Check-Mate w/Upper BodyAttachment (shown) -#41300 - $5225.00Check Mate - #41000 - $4595.00
Now Faster and Easier to Set Up with the New Hole Centers
CALL FORFREE VIDEO!
1-800-227-8325
Innovative autobody tools and equipment
Steck Manufacturing Company, Inc. • 1-800-227-8325 19
Upper Body Attachment■ Indispensable for measuring windshield openings, roof lines, side
panels, B-pillars, etc.
■ Quickly make comparative measurements, referenced to the cen-terline, with or without data book
■ The 24" horizontal bars measure points up and down B-pillarswithout moving the upright frame
Upper Body Attachment (included in #41300) - #41350 - $783.00Includes lower crossbar, upper crossbar, (2) upright bars, (2) 24" horizontal bars,(2) red slides, (4) blue slides, (2) 12" pointers and (2) 18" pointers
Roll-Around Storage Rack■ Holds all Check-Mate components■ Includes convenient cross bar holder for set-up■ Tray for small parts Storage Rack - #41199 - $287.50
Stepped Lower Support Barsfor Drive-on Benches
Magnetic bases attach to the ramps of your drive-on bench. Steppeddown center of Support Bar provides additional height clearance forthe Check-Mate.1-1/2" Stepped Support Bar (set of 2) - #41197 - $78.50
Need Technical Assistance?Have Questions?
Call Toll Free
Steck Tech Equipment TrainingClass FREE!!! Including Hotel!
Training Video - 3 Hour VHS
Established in 1946
1-800-227-8325
CALL FORFREE VIDEO!
1-800-227-8325
CHECK-MATE FRAME
STEPPED LOWER SUPPORT BARDRIVE-ON RAMP
THREADBAR WITHMAGNETIC BASE
This equipment training tape makes a good refresher coursefor current personnel or an initial training course for newpersonnel. Covers the same subjects that are covered inthe two day Steck Tech Course.Training Tape (VHS) - #41180
Subjects – A two day class that covers the measuring ofuni-body cars, reading chassis dimension manuals, andgives the students an opportunity to set up the Check-MateMeasuring System on a damaged vehicle. A practicalhands-on measuring course. The course also briefly coverspulling of uni-body cars and 4-wheel alignment. Call ourtoll-free number for class schedule or to make reservations.
“It has been my pleasuredoing business with Steck.It’s simple and hassle free. Isent in my car opening toolidea (now known as theBigEasy™) and throughSteck’s guidance and
marketing knowledge my idea is nationally knownand sold. I receive money on each tool sold andhave a sense of accomplishment each time myroyalty check comes. I have 350 patents andinventions and would recommend Steck to anyone!”
— Frank Child,Child Towing & Recovery
Innovative autobody tools and equipment
Steck Manufacturing Company, Inc.1115 So. Broadway, Dayton, Ohio 454081-800-227-8325Fax: 937-222-6666www.steckmfg.comE-mail: [email protected]
Steck Turns Your Ideas IntoNew Products, and...
Royalty Checks for You!
Have you developed a unique tool for body repair?Call Ray or Larry Steck at 1-800-227-8325.If your idea is original and Steck decides to use it, Steck willpay you a royalty on the tools they sell!
R. Robb International Associates • 2760 Ridgeway Court • Walled Lake, MI 48390-1662 USATel: 248-669-8100 • Fax: 248-669-2804 • E-mail: [email protected] • Web: www.rria.comEXPORT DEPARTMENT:
Steck Manufacturing Co., Inc.Mission Statement
To manufacture and market newproduct ideas as well as existing toolsand equipment that will make the workof the automotive repair technicianfaster and easier. To use the bestpeople, methods and equipmentavailable to produce quality tools, torespond to our customers’ needs, andto create a better quality of life for eachour employees.
Antenna Wrench ......................................5A-Pillar Puller...........................................4BigEasy Glo..............................................3Bumper Tree & Accessories...................12Check-Mate Measuring System........18-19DA Mini Sander......................................11Door Aligning Bar ....................................8Door Handle Tool .....................................6Door Hinge Pin Popper ............................8Door Holders ...........................................7Door Jammer...........................................9Door Lock Covers ..................................14Door Removal Kit.....................................7Door Spring Tool......................................7Expandable Jaw Rail Pullers ..................17
E-Z C Laser Measuring ..........................17E-Z Rest Door Hanger..............................7E-Z Strip Molding Tool .............................9E-Z Store Door Aligning Bar.....................8Fender Fixer Tool......................................8Ford Headlight Retaining Clip Tool .........10GM Door Spring Tool ...............................7Gun Slinger............................................14Hose Magnet...........................................9Iron Hand.................................................4LittleEasy .................................................3Lockout Tools ..........................................2Lower Control Arm Bracket Puller .........16Lug Off Sockets .......................................2Measure 'N Stick....................................15
Mighty Midget Panel Clamps ...................6Molding Release Tool...............................5Paint ‘N Stick .........................................12Paint Nib Files ........................................11Panel Tree ..............................................13Pickup Bed Lifter ...................................16Plugweld Pliers ......................................10Pro Step.................................................15Pogo II .....................................................4Pop Rivet Stoppers ..................................5Portable Benches ...................................14Pull Rods .................................................9Quarter Puller & Q.P.II .............................4Radiator Support Tab Puller...................16Rim Masker ...........................................14
S10/S15 Rear Door Spring Tool...............7Sanding Blocks ......................................10Space Saver 2000..................................16Spec-Out Nib File ...................................11Spreaders ................................................6Super Scraper..........................................5Super Stripe Stripper .............................11Sure Grip Trim Clip Pliers ......................11Tail Gate Holder......................................13Ten-in-On Trim Tool .................................6Tool Sling...............................................14Trim Tools.............................................5-6
PRODUCT INDEX
See the BigEasyon page 3