1 | P a g e

GUJARAT TECHNOLOGICAL UNIVERSITY

ITM UNIVERSE

A Report On-

Automatic Air Filing in Tire

Under subject of

DESIGN ENGINEERING – 1A B. E. II, Semester – III

(MECHANICAL ENGINEERING) Submitted by:

Group: C5

Sr. Name of Student Enrolment No. 1. 140950119

2. 140950119 3. 140950119

4. 130950119

Guided byMr.

Assistant Professor

Minesh PatelHead of the Department

Academic Year(2015-2016)

Chandkheda, Ahmedabad

Affiliated

2 | P a g e

Contents1. INTRODUCTION................................................................................................3

1.1. Design Engineering.........................................................................................3Thinking Procedure:.................................................................................................3

2. Story Boarding Canvas...........................................................................................42.1. Users:..........................................................................................................42.2. Activities......................................................................................................4

3. AEIOU SUMMARY:............................................................................................63.1. The environment:...........................................................................................63.2. The interaction:..............................................................................................63.3. Objects:.......................................................................................................63.4. Activities:.....................................................................................................63.5. Users:..........................................................................................................7

4. Ideation canvas....................................................................................................94.1. The general activities:......................................................................................94.2. The general situation/location / context:................................................................94.3. The general props possible solution is:.................................................................9

5. Product development canvas:.................................................................................115.1. The general people who will use our product:.......................................................115.2. Product experience........................................................................................115.3. Product features...........................................................................................115.4. Product function...........................................................................................115.5. Component.................................................................................................11

3 | P a g e

1. INTRODUCTION

After Our two labs, we had created our group and decided our topic as Automatic Air Filing in Tire. With our project we are going to create a facility which helps To filing air in tire in any vehicle so that the vehicle can easily drive .In our group, we have four members. All members are quite good at their own specific work.

1. From: Baroda

2.From: Baroda

3. From: Baroda

4. From: Baroda

Our faculty guide Mr. Guide has explained as all about design engineering and also helped us in our project a lot.

1.1. Design Engineering Design Engineering is a general term that covers multiple engineering disciplines including electrical, mechanical, chemical engineer, aeronautical engineer, civil, Computer Engineering, Information Technology and structural/building/architectural engineers. The uniting concept is a focus on applying the 'engineering design process, in which engineers develop new products or processes with a primary emphasis on functional utility.While industrial designers may be responsible for the conceptual aesthetic and ergonomic aspects of a design, the design engineer usually works with a team of engineers and other designers to develop conceptual and detailed designs. He may work with industrial designers and marketers to develop the product concept and specifications, and may direct the design effort

Thinking Procedure:o Find our goalo Evaluation of goalo Generate proposals o Evaluation of proposals o Improvements

4 | P a g e

2. Story Boarding Canvas

Understanding the problem of society is one of the biggest challenges for engineering student as till now they were making project on imaginary ideas. So the day 1 session was based on understanding the domains of the problem in broader sense which emphasized on interacting with the people of your domain area which included more of casual talk rather than technical session. And this is the story boarding canvas.

Here we would like to explain the aspects of this canvas by our project which Automatic Air Filing in Tire.

As we know that, many crowd places like Garage, bus station garage, High ways or etc. have very big issue related with the tire because sometimes they have not much Air Filing in Tire or Puncher.

In such type of situation they can use facility Automatic Air Filing in Tire.

2.1. Users:Every general public like student, engineers, professors, Driver ...etc.

2.2. Activities:

The general activities are:

o Drivingo Observingo Waitingo Lubrication of parts

5 | P a g e

The image of Story Boarding Canvas is given below

Fig. (1). Story Boarding Canvas

3. AEIOU SUMMARY:

After finishing all 3 canvas, we started working on AEIOU summary whereo A: Activitieso E: Environmento I: Interactionso O: Objectso U: Users

This canvas is totally based on the observation. After observing some places like Garage, bus Garage , we have started working to make

it fair

3.1. The environment:o Noisy o Mechanical o Automatic o Crowd placeo Suffocating

3.2. The interaction:o Security o Servants

6 | P a g e

o Managero About mechanismo Public o Manager to vehicle ownerso Security to vehicle owners

3.3. Objects:o Cameraso Hydraulic jacko Lightso tireo Window o vipero Cars

3.4. Activities:o Driving o Maintaining the mechanismo Cleaning of space allottedo Interactions’o Regular changing of partso Maintaining the electricity neededo Maintaining the proper speed o Observing o Lubrication of parts

3.5. Users:o Visitors of occasiono Car ownero Studentso Employeeso Doctorso Educational staffo Special occasional places

7 | P a g e

The image of our AEIOU summary is as given below

Fig. (2). AEIOU Summary Canvas

The image of Mind Mapping canvas is given below

Fig.(3). Mind Mapping Canvas

4. Ideation canvas

8 | P a g e

After 5 labs we have started working with people where we simply thought about the people for whom we want to solve the problem.

We started with our ideation canvas. For our product we have listed the people who can generally use our product. All

genera people like student, teacher, doctors, engineer, professor, businessman, officer, etc are people who will use our product.

The thought for context/location /situation and finally for possible solutions.

4.1. The general activities:o Student to education institutes o Visits tours to religious placeso Electricity neededo Men and women going to shoppingo Children going to schoolo Lubrication of partso Software systemo Charging of E cars

4.2. The general situation/location / context:o Location/Situation /Context

o Garageo Officeo Homeo Bus station o Air porto Restaurant

4.3. The general props possible solution is:o Pressure Monitoring o Air filingo Safetyo Speed control o Obeying traffic rule

9 | P a g e

The image of the ideation canvas is given below:

Fig. (4). Ideation Canvas

5. Product development canvas:

On our 7th we have started creating our product development canvas. In product development canvas we have mentioned about our product, its function,

features, revalidation, and product experience. The purpose of product development is the Automatic Air Filing in Tire.

5.1. The general people who will use our product:

o vehicle student o labours of factory

5.2. Product experience o Proper usage of tireo Time consuming

10 | P a g e

o Increasing comfortless

5.3. Product features o Automatic air filingo Fuel savingo Speed/pressure control

5.4. Product function

o Traffic reduction o Highly mechanical

5.5. Componento Pressure gaugeo Sensoro Mechanical roado Transmittero Compressor o Thermistero Mechanical carriageo Hydraulico The image of Product Development Canvas

The image of product development canvas

Fig. (5). Product Development Canvas