`

Authorized Dealer in Florida, Puerto

Rico & the Caribbean for:

Our ICF Finishing Solution

We offer the best solution for finishing on ICF. Fastrack is the only bonding agent

specifically designed for ICF (developed by CICFS, LLC for the Caribbean market )

and we combined this with the Sider Crete ICF finishing solutions. This is probably

the best solution that you will find for the Caribbean climate. It will also work

well in other climates. The Fastrack agent provides a very strong mechanical

bond or adherence for the power base which is also reinforced with a high-grade

4.5 oz open-weave glass fabric mesh treated against the effects of the alkali

contained in cement-base coatings, providing impact resistance and tensile

strength. After applying the power base with the mesh you can either paint or

apply an exterior finishing (Sider Plast) that comes with the color of

your preference which is treated against mold with a ten year warranty from the

manufacturer. The end result is a solid and firm ICF finishing which will not

crack. The Sider Plast Finishing is an acrylic coating, rendering textures such as

Swirl, Coarse Sand, Fine Sand... Designed for application over our ICF base-coat to

render a smooth and uniform acrylic finish. You cannot go wrong with this ICF

Finishing solution.

FASTRACK is a plaster to concrete liquid applied bonding agent specially designed

to provide plaster/stucco a permanent bond to high density foam surfaces. It is

also very effective on structurally sound surfaces such as concrete, masonry and

gypsum board. This modified synthetic polymer emulsion is resistant to humidity

and provides a chemical/physical bond between the high density foam and

plaster surfaces reinforcing any mechanical bond achieved.

FASTRACK dries to a thin texturized polymer film that will not harden or crack on

aging.

FASTRACK adhesive film creates a textured surface profile on the base that

improves the plaster/Stucco initial bond, facilitates plaster/finishes

applications/placement and significantly improves the adhesion of Portland

cement plasters, mortars and stucco finishes on high density foam. This emulsion

takes a minimum of two hours to dry before plastering and maintains its adhesive

properties for a period of five (5) days. After this date it is mandatory to reapply a

new coat of FASTRACK to the high density foam or concrete surface before

plastering.

• Bonds concrete to high density foam

• Permanent adherence

• Humidity resistant

• Will not harden or crack on aging

• Ready-to-use

You can easily identify the Fastrack product when applied by its unique green

color. Always look for this label to identify this unique product:

Reinforcing Mesh - Our high-grade 4.5 oz open-weave glass fabric mesh is

treated against the effects of the alkali contained in cement-base coatings,

providing impact resistance and tensile strength.

ICF Coatings

Sider-Crete provides simple solutions with a complete line of ICF coatings. Sider-

Crete's coatings are strong, durable & easy to install and include:

Strong & Durable ICF Base-Coat ICF 'Old-World' Colored Stucco

High Quality Reinforcing Mesh ICF Acrylic Colored Finishes

Waterproofing Solutions

Base-Coat

Power-Base ICF - Power-Base ICF is a durable polymer-modified interior or

exterior leveling coating for use over ICF. Used as a leveling coating for ICF

surfaces, it will not shrink and will render a durable and flexible base-coat.

Finish Coats

Power-Kote ICF - An advanced ICF integrally-colored, pre-mixed stucco rendering

an 'old-world' modeled look in a variety colors and textures. The beautiful

rendering of colored cement-stucco at its finest, integrally colored, designed for

ICF and easy-to-use!

Sider-Plast Finish - Our acrylic coating, rendering textures such as Swirl, Coarse

Sand, Fine Sand... Designed for application over our ICF base-coat to render a

smooth and uniform acrylic finish.

Swimming Pool System

Power-Base ICF - Sider-Proof FF-PR - A cement-based polymer modified

waterproofing plaster system for ICF swimming pool comprised of a flexible ICF

mesh reinforced base-coat and a Roll-On Cement Plaster finish.

Waterproofing

Sider-Proof ICF - An innovative cement-based, polymer-modified waterproofing

coating for use above and below grade, specifically formulated for ICF

applications. Packaged in a kit and easy-to-apply, just mix and brush or roll on in

two cross coats. It renders a strong, durable yet flexible waterproofing finish.

Sider-Proof HF ICF - Enhancements on our Sider-Proof ICF product to provide

superior flexibility (resist cracks up to 1 mm), Sider-Proof HF ICF is excellent for

use in above or below grade applications where exceptional flexibility is required.

Packaged in a kit, easy to apply and especially formulated for ICF applications, just

mix and brush or roll on in two cross coats.

Other colors available please use: https://www.sherwin-williams.com/visualizer/# for color selection. Some custom colors may require additional pigmentation at an additional charge.