7/23/2019 AUT 750 Welding Torch

http://slidepdf.com/reader/full/aut-750-welding-torch 1/2

7/23/2019 AUT 750 Welding Torch

http://slidepdf.com/reader/full/aut-750-welding-torch 2/2

Pos.Description Details Part Number Order Number  

1 Swan neck straight, cpl. 974.01.001 974.0001

Consisting of:2 Inner neck cpl. 974.01.004 974.0004

3 Outer neck cpl. 974.01.005 974.00054 Insulation plate 974.02.015 974.0022

5 Insulation bush 974.02.020 974.0027

6 Collet for liner  outer 0 4.5 mm 974.02.023 974.0030outer 0 4.9 mm 974.02.019 974.0026outer 0 5.4 mm 974.02.025 974,0031

7 Blind current 974.02.022 974.0029(only to be used if not blowed-out)

8 Waterconnection nipple 974.01.006 974.00069 Gasconnection nipple 974.01.007 974.0007

10 Nut 710.02.004 710.0014

11 Insulator 940.02.019 940.003512 Nut 500.02.041 500.0082

13 Screw 20 pcs. 00912.05.014.0.5 009.006414 Ermat hose, length 20 cm per m 103.04.00.00.000 103.0001

15 Hose clamp 20 pcs. 171.00.105 171.000416 Connection bush 940.02.024 940.0040

(to be used when blowing out)17 Connection nut 500.02.129 500.0138

(to be used when blowing out)

20 Spatter protection without drill hole 10 pcs. 974.02.021 974.0028(to be used if not blowed out-refer to Pos. 20 b)

20a Spatter protection with drill hole 10 pcs. 974.02.014 974.0021(when using with blow-out resp. Gas axial)

20bGas diffusor  10 pcs. 974.02.026 974.0032(better alternative to Pos. 20)

21 Contact tip (CuCrZr) M 10 10 pcs. 140.16.403.33 140.061610 pcs. 140.20.403.33 140.066510 pcs. 140.24.403.33 140.069810 pcs. 140.28.403.33 140.071210 pcs. 140.32.403.33 140.0734

22 Gas nozzle, conicalNom. 0 19

145.02.074 145.0019