Australian Pre-stressed - Hayes & Co - Hayes and Co
Transcript of Australian Pre-stressed - Hayes & Co - Hayes and Co
• Fence posts that last a lifetime!
• Available in various lengths, up to 3m tall
• Prestressed 40 MPA concrete with high tensile
reinforcing strands
• They’re strong and driveable
• Consistently spaced and sized predrilled holes
• Predrilled holes for barb, plain or mesh wire
• Brackets to easily attach timber, metal or rail
• Suitable for any type of fence for rural
internal or boundary fences
• Reliable, consistent quality and supply
• Affordable long term fence solution
• Australian owned and operated company
Australian Pre-stressed
Fence it Once, Fence it Right, Never fence it again!
Order today...
Australian Concrete Posts
ACP’s prestressed concrete fence posts are made using special materials, methods and manufacturing processes to ensure consistent quality and strength. THE CONCRETE… ACP use a consistent and certi-fied mix of concrete which is vibrated and cured. It contains a high ratio of evenly distribut-ed strong blue metal stone, sand and cement. Plus there is no lime in the concrete, there-fore, no rusting of the wire strands. THE WIRE… 5.05mm high tensile strands with large amounts of carbon. This allows the strands to be tensioned and also prevents the wire from rusting. The reinforc-ing is not like 10mm mild steel used on house footings and other concrete posts, which you may have seen explode when moisture has seeped into the posts causing it to rust. ACP post will NOT do this. Read on to find out why. PRESTRESSED… Prestressing is a technology that’s used to build massive civ-il structures, like bridges and bridge pylons which can be seen being rammed into the
earth on new roadworks. Essentially, high tensile strands of wire are pretensioned un-der several tonnes of stress. When the concrete is set in the mould, the tension is re-leased from the strands, com-pression pulls the concrete to-gether to form a very strong and impenetrable post. BRACKETS… The whole fencing process has been designed to be like a “Meccano” set – hit it in, and bolt it together. Generally, no replacement of posts will be required. SAVE MONEY AND TIME… Concrete fence posts are affordable and save property owners valuable time and money. They will outlast any other timber or steel post on the market. With a concrete fence post your fence will be-come a farm asset! For your new or replacement fences, choose the affordable sustainable and long-term solution. Fence it once, fence it right, never fence it again with Australian Concrete Posts! Read through our leaflet, choose the post for your project and contact us for more information.
Lifetime fence posts...
This prestressed con-
crete post has been in
the ground for over 60
years. Exposed steel
strands have not affected
the integrity of the post.
Lifetime Guarantee…
No Rot, No Burn and Termite Proof Posts!
www.ConcretePosts.com.au
Australian Concrete Posts
The Driving Cap holds a layer of 20mm
rubber in place. The layer of rubber pad-
ding inside minimises impact on post.
*Refer to ACP Product Handling Guides for recommended methods for driving
and pulling wires through posts.
The prestressed concrete fence post is
designed for tough conditions and are drivea-
ble with a standard post driver.
Percussion drivers, pneumatic drivers and
standard thumper are all able to be used to
drive the concrete fence post.
ACP recommend that a thick rubber material
be used to cushion the direct impact on top
of the post when driving them in. ACP have
developed a driving cap to be placed on top
of the post. Before ramming in hard ground
we recommend a pilot hole.*
Driveable
Predrilled Holes
For the property owner and fencing contractors,
no time is wasted measuring and drilling holes,
or maintaining equipment. Our fence posts are
uniform and consistent in size and shape, the
holes are pre-drilled to suit four or five barb
wires. Strainers have holes for Gate Kits too!
Yes, concrete posts are suitable to use with heavy gauge
wire. Pull wires one at a time through the predrilled
holes or simply tie on mesh and plain wire.*
Driving Cap
Code: DC01
Australian Concrete Posts
5 Barb Fence Posts Available in 1.9m (6.4ft) and 2.15m (7ft) lengths. 130mm
wide post with 5x30mm & 10x10mm predrilled holes.
40 MPA Concrete. Each post is prestressed using 2x5.05mm
high tensile reinforcing strands.
POST CROSS SECTION
130mm
60mm
70mm
www.ConcretePosts.com.au
(Dra
win
gs
are
no
t to
sca
le)
225mm (8 3/4”)
260mm (10 1/4”)
200mm (8”)
245mm (9 3/4”)
80mm 80
140
100
115
90
70
120
70
70
75
80
70
80
MM BETWEEN
HOLES
19
00
mm
(6
.4ft
)
230mm 100
100
56
0 m
m
Code: FP01 Length: 1900mm (6.4ft) Holes: 5x30mm & 10x10mm Dimensions: 130x70/60x1900mm Weight: 36kg each post. Pack: 30 posts/pack weight 1050kg
FP01
225mm (8 3/4”)
260mm (10 1/4”)
200mm (8”)
245mm (9 3/4”)
(Dra
win
gs
are
no
t to
sca
le)
21
50
mm
(7
ft)
80mm 80
140
100
115
90
70
120
70
70
80
70
75
50
100
MM BETWEEN
HOLES
100
230mm
80
0 m
m
Code: FP03 Length: 2150mm (7ft) Holes: 5x30mm & 10x10mm Dimensions: 130 x 70/60 x 2150mm Weight: 40kg each post. Pack: 30 pack weight 1200kg
FP03
130mm wide
1.9m Post (6.4ft)
2.15 Post (7ft)
SPECIFICATIONS Code: FP22 Length: 2200mm (7.2ft) Holes: 4x30mm & 1x10mm Dimensions: 110 x 70/55 Weight: 34kg each post. Pack: 30 posts/pack weight 1020kg
POST CROSS SECTION
110mm
55mm
70mm
Australian Concrete Posts
4 Barb Fence Posts 2.2m (7.2ft) length post with 4x30mm & 1x10mm
predrilled holes. Available in 130mm or 110mm width.
40 MPA Concrete. Each post is prestressed using 2x5.05mm
high tensile reinforcing strands.
SPECIFICATIONS Code: FP04 Length: 2200mm (7.2ft) Holes: 4x30mm & 1x10mm Dimensions: 130 x 70/60 Weight: 41kg each post. Pack: 30 posts/pack weight 1230kg
POST CROSS SECTION
130mm
60mm
70mm
www.ConcretePosts.com.au
22
00
mm
(7
.2ft
)
280mm
280mm (11.6”)
400mm
75mm
280mm
88
0 m
m
FP22
FP04
130mm wide
110mm wide
Fence it Once, Fence it Right!
✓ Prestressed 40MPA Concrete
✓ Consistently sized blue metal stone
✓ Evenly spaced and vibrated mix
✓ No lime in concrete, therefore, no rusting of wire strands
✓ Two high tensile reinforcing strands
Australian Concrete Posts
Tall Fence Posts Available in 2.4m (8ft) and 3m (10ft) lengths.110mm
wide post with predrilled holes. 40 MPA Concrete. Each
post is prestressed using 2x5.05mm high tensile reinforcing strands.
www.ConcretePosts.com.au
200mm
200mm (7 7/8 ”)
100mm
24
00
mm
(8
ft)
(D
raw
ing
s a
re n
ot
to s
cale
)
200mm
130mm
130mm
200mm
200mm
200mm
140mm
70
0 m
m
200mm
200mm (7 7/8 ”)
100mm
30
00
mt
(10
ft)
(D
raw
ing
s a
re n
ot
to s
cale
)
200mm
200mm
200mm
200mm
200mm
200mm
200mm
200mm
70
0m
m
70mm
POST CROSS SECTION
110mm
55mm
110mm wide
SPECIFICATIONS Code: FP25 Length: 2400mm (8ft) Holes: 10x13mm Dimensions: 110 x 70/55 Weight: 37kg each post. Pack: 30 post/pack weight 1110kg or 15 pack weight 555kg
FP25
SPECIFICATIONS Code: FP26 Length: 3000mm (10ft) Holes: 12x13mm Dimensions: 110 x 70/55 Weight: 46.3kg each post. Pack: 15 posts/pack weight 695kg
FP26
3m Post (10ft)
2.4m Post (8ft)
POST CROSS SECTION
110mm
55mm
70mm
Australian Concrete Posts
Notched Fence Post 1.9m (6.4ft) length post with pre-notched edge.
Available in 110mm width. 40 MPA Concrete. Each post is
prestressed using 2x5.05mm high tensile reinforcing strands.
www.ConcretePosts.com.au
110mm wide
19
00
(6
.4ft
)
SPECIFICATIONS
Code: FP21 Length: 1900mm (6.4ft) Notches: Spaced to matches Standard Waratah Star Picket Dimensions: 110 x 70/55 x 1900mm Weight: 30kg each post. Pack: 30 posts/ pack weight 870kg
FP21
Pre-notched edge
to attach wire
Box End Strainer
Assembly on Corner or
Direction Change
Strainer Assembly for
Orchard Trellis Support
Strainer posts are used anywhere you would use a timber “round”.
They’re designed for straining fences and building stockyards,
feedlots, trellis and orchard support systems.
Australian Concrete Posts
Strainer Posts
Box End Strainer Assembly
on corner or Direction Change
Adjustable Strainer Assembly
with Concrete Stay Pad
Strainers suitable to
build Stockyards
STRAINER CROSS SECTION
170mm
125mm
135mm
Australian Concrete Posts
Strainer Posts Available in 2.15m (7ft), 2.4m (8ft) & 3m (10ft) lengths.
170mm wide post with predrilled holes. 40 MPA Concrete. Each
post is prestressed using 4x5.05mm high tensile reinforcing strands.
www.ConcretePosts.com.au
Pre-drilled holes for gate kits
85
135
110
(Dra
win
gs
are
no
t to
sca
le)
21
50
mm
(7
ft)
260mm
200mm
85mm
245mm
225mm
245mm 110
70
70
85
0 m
m
SPECIFICATIONS Code: SP01 Length: (7FT) 2.15m Weight: 106kg Holes: 5 x 30mm & 5 x 16mm Dimensions: 170 x 135/125 Weight: 106kg each post Pack: 6 posts/pack weight 640kg
200mm
85mm
260mm
260mm
250mm
24
00
mm
(8
ft)
135
110
245mm
70
70
110
250mm
85
0 m
m
SPECIFICATIONS Code: SP02 Length: (8FT) 2.4m Weight: 116kg Holes: 11x16mm Dimensions: 170 x 135/125 Weight: 119kg each post Pack: 6 posts/pack weight 715kg
SP02 SP01
2.4m Post (8ft)
2.15 Post (7ft)
Also available in 3m
(10ft) length with
12x16mm holes. SP04
Box End Assembly and Gate Kit easily and
quickly attach on each strainer post.
Australian Concrete Posts
Quick and Easy Brackets
www.ConcretePosts.com.au
BK170.RND & BK000.RND
ACP Galvanised Steel Brackets are designed to fit onto concrete fence
posts. They make the end assemblies secure, strong and long-lasting. To
make building your fence easier we have brackets that can attach timber
or cattle rail to the posts. Simply hit the posts in, and bolt it together!
Build it once, build it right, never build it again!
Box End Strainer
Assembly on corner
or direction change
BK170.RND
BK000.RND
BK130.RND
AC04 Gate Kit
Collar Bracket
BK130.COL
Post & Cattle Rail with
Collar Bracket.
Collar Bracket
BK130.COL
Post with Round Rail
BK170.RND
& BK000.RND
...with Cattle Rail
Post and Rail for Farm entrances, Horse
and Stock fence, Stockyards, Boundary fences
Australian Concrete Posts
Low maintenance fences
www.ConcretePosts.com.au
Effective in harsh,
unstable and uneven
terrain. The most
robust and long-lasting
barrier fence post.
Re-useable and simple
to attach mesh, fibre
and wire.
Insert plastic conduit
into the predrilled
holes for electric wire.
Order today…
Phone: 02 6682 8614
Email: [email protected]
Australian Concrete Posts Pty Ltd ACN. 94 169 021 694
PO Box 94 ALSTONVILLE 2477 NSW
Fence it Once, Fence it Right, Never fence it again! For more information visit our website…
Use predrilled holes
to pull through barb
or plain wire and to
attach mesh or hot
wire support system.