Australian made led lighting solutions · PDF fileThe Aqualuma LED Highbay standard / lowbay...
Transcript of Australian made led lighting solutions · PDF fileThe Aqualuma LED Highbay standard / lowbay...
led lighting solutionsAustralian made
124 Siganto Drive, Helensvale, Queensland, Australia 4212
Ph: 1300 14 55 55 | [email protected] | WWW.AQUALUMA.COM
industrial & commercialapplications
Established in 2004, Aqualuma is a privately owned company based on the Gold Coast in Queensland, Australia.
Widely regarded as the world’s leading marine lighting manufacturer, Aqualuma has redefined the category with superior technology and high-quality products. An extensive research and development program has seen the range grow to include a comprehensive and versatile range of lighting, including thru-hull, submersible, deck and flood lighting. Aqualuma’s iconic thru-hull range is the world’s first and only underwater light range with a one-piece polymer housing unit that has no lenses or seals and is patented in 127 countries.
Company Profile
Since its inception, Aqualuma has worked exclusively with LEDs and has gained an extensive knowledge of what is required to design and manufacture world-class LED fixtures. Aqualuma’s engineers include some of the world’s leading LED specialists and optical designers. Strategic partnerships with US based LED and electronics manufacturers combine to give Aqualuma the strength on which its reputation has been built.
Building on their technological advantage, Aqualuma started developing their commercial and industrial lighting range, which was introduced in January 2013. The Highbay family has been independently tested to be the most energy efficient in the world. Designed and manufactured in Australia to the same standards as their marine lighting range, Aqualuma guarantees a long maintenance-free life span.
By harnessing the latest LED technology, it is now possible to manufacture industrial and commercial light fixtures that save money in both power consumption and maintenance costs. However, it is apparent that traditional lighting manufacturers and new start up companies do not always unlock the full potential offered by LED technology. Light fixtures currently available often leave a lot to be desired in terms of efficacy (the amount of light emitted for the power consumed) and reliability.
Aqualuma has sales and service centres in Europe, Asia, Oceania, UAE and the USA. Aqualuma products are distributed to more than 52 countries.
Warehouse Manufacturing
Exteriors / Awnings
Cold Rooms
Petrol Station Canopys Food Production / Clean Rooms
Retail
Sports
Primary Applications
Contact UsAqualuma Head Office
124 Siganto Drive, Helensvale, Queensland, Australia 4212
Ph: 1300 145 555 | Int Ph: + 61 7 5519 4555 | [email protected] | www.aqualuma.com
www.aqualuma.com 1300 145 555
Aqualuma is proud to service the following industry leaders
The Aqualuma LED Highbay standard / lowbay optic is part of the premium commercial range and is designed specifically to replace traditional metal halide or induction lighting used in indoor and outdoor applications. Ideally suited for use in factories, cold stores and warehouses, including hazardous areas. Suitable for approximate heights between 3-13m.
Specifications
LED Light Source Lumileds
Colour Temp (Tc) 4000 or 5300 Kelvin
CRI CRI > 80 CRI > 70
Luminous Flux Up to 27,500 lm
Efficacy Up to 162lm/W
LED Current / LED 90W, 125W, 165W, 185W
Input Voltage 90V-277V 47-63Hz
Warranty 7 Year premium warranty
Optical Options Highbay, lowbay, shops & stores
Lens Options Clear or diffused acrylic, polycarbonate
• One for one replacement for >400W metal halide light fittings
• 90W, 125W, 165W & 185W versions available• Full spectrum colour rendering (improved
visual acuity in comparison to metal halide and fluorescent light fittings)
• L70 rated for minimum 100,000hrs at 25°C• LM6 marine grade aluminium / powder coated• Certified to all applicable AS/NZ, European and
USA standards• Instant on / off• IP66 rated• IPART and VEET approved• Intelligent control & sensor options available• No flicker
Operating voltage: 90-277VAC, 47-63HzPower factor: λ > 0.90Operating Temperature: -40 ⁰ C to 45 ⁰ C
Weight: 7.5kgMounting: Eye, bracket, ceiling plate, ezystrut Cabling: 3m PVC cable + 3 pin plug (std)Housing: Marine grade powder coated “copper free“ aluminium Lens: Clear or diffused acrylic, polycarbonate
LED Highbaypremium
highbay or lowbay optic
www.aqualuma.com 1300 145 555
Features Electrical Specifications
Mechanical Information
IES INDOOR REPORTPHOTOMETRIC FILENAME : AQHBH12557CA-EU-LB.IES
POLAR GRAPH
1598
3195
4793
6390
1
2
Maximum Candela = 6390 Located At Horizontal Angle = 0, Vertical Angle = 55# 1 - Vertical Plane Through Horizontal Angles (0 - 180) (Through Max. Cd.)# 2 - Horizontal Cone Through Vertical Angle (55) (Through Max. Cd.)
Photometric Toolbox Professional Edition - Copyright 2002-2015 by Lighting Analysts, Inc.Calculations based on published IES Methods and recommendations, values rounded for display purposes.Results derived from content of manufacturers photometric file.
Page 1
IES INDOOR REPORTPHOTOMETRIC FILENAME : AQHB16557CA-EU-STM.IES
POLAR GRAPH
2153
4306
6458
8611
1
2
Maximum Candela = 8611 Located At Horizontal Angle = 0, Vertical Angle = 20# 1 - Vertical Plane Through Horizontal Angles (0 - 180) (Through Max. Cd.)# 2 - Horizontal Cone Through Vertical Angle (20) (Through Max. Cd.)
Photometric Toolbox Professional Edition - Copyright 2002-2015 by Lighting Analysts, Inc.Calculations based on published IES Methods and recommendations, values rounded for display purposes.Results derived from content of manufacturers photometric file.
Page 1
MADE90W
125W165W185W
L70>100,000
HOURS7YR
WARRANTYIP66RATED
162LPW
veet & ipartapproved
The Aqualuma LED Highbay aisle optic is part of the premium commercial range and is designed specifically to replace traditional metal halide or induction lighting used in indoor and outdoor applications. The Highbay Aisle Optic is optimised to provide a long and narrow beam pattern, which is ideally suited to illuminate tall storage racking in warehouses and distribution centres.
LED Light Source Lumileds
Colour Temp (Tc) 4000 or 5300 Kelvin
CRI CRI > 80 CRI > 70
Luminous Flux Up to 25,945 lm
Efficacy Up to 151lm/W
LED Current / LED 90W, 125W, 165W, 185W
Input Voltage 90V-277V 47-63Hz
Warranty 7 Year premium warranty
Optical Options Aisle optic
Lens Options Clear or diffused acrylic, polycarbonate
• One for one replacement for >400W metal halide light fittings
• 90W, 125W, 165W & 185W versions available• Full spectrum colour rendering (improved
visual acuity in comparison to metal halide and fluorescent light fittings)
• L70 rated for minimum 100,000hrs at 25°C• LM6 marine grade aluminium / powder coated• Certified to all applicable AS/NZ, European and
USA standards• Instant on / off• IP66 rated• IPART and VEET approved• Intelligent control & sensor options available• No flicker
www.aqualuma.com 1300 145 555
Features
LED Highbaypremium
aisle optic
Operating voltage: 90-277VAC, 47-63HzPower factor: λ > 0.90Operating Temperature: -40 ⁰ C to 45 ⁰ C
Weight: 7.5kgMounting: Eye, bracket, ceiling plate , ezystrut Cabling: 3m PVC cable + 3 pin plug (std)Housing: Marine grade powder coated “copper free“ aluminium Lens: Clear or diffused acrylic, polycarbonate
Electrical Specifications
Mechanical InformationSpecifications
IES INDOOR REPORTPHOTOMETRIC FILENAME : AQHBH16557CA-EU-IOM.IES
POLAR GRAPH
3711
7422
11132
14843
1
2
3
Maximum Candela = 14843.179 Located At Horizontal Angle = 90, Vertical Angle = 1# 1 - Vertical Plane Through Horizontal Angles (90 - 270) (Through Max. Cd.)# 2 - Vertical Plane Through Horizontal Angles (0 - 180)# 3 - Horizontal Cone Through Vertical Angle (1) (Through Max. Cd.)
Photometric Toolbox Professional Edition - Copyright 2002-2015 by Lighting Analysts, Inc.Calculations based on published IES Methods and recommendations, values rounded for display purposes.Results derived from content of manufacturers photometric file.
Page 1
MADE90W
125W165W185W
L70>100,000
HOURS7YR
WARRANTYIP66RATED
151LPW
veet & ipartapproved
The Aqualuma Premium LED Highbay is designed to replace traditional metal halide or induction lighting used in indoor and outdoor applications. Ideally suited for use in factories, cold stores and warehouses, including hazardous areas. Suitable for heights between 5-13m. Now availible with HACCP approved Food Safe enclosure for food storage and processing facilities.
Specifications
LED Light Source Lumileds
Colour Temp (Tc) 4000 or 5300 Kelvin
CRI CRI > 80 CRI > 70
Luminous Flux Up to 19,047 lm
Efficacy Up to 162lm/W
LED Current / LED 90W and 125W
Input Voltage 90V-277V 47-63Hz
Warranty 7 Year premium warranty
Optical Options Highbay, lowbay, Aisle, Shops & Stores
Lens Options Clear or diffused acrylic, polycarbonate
• Replaces >400W metal halide light fittings in any areas requiring food grade fixtures
• 90W & 125W versions available• Full spectrum colour rendering (improved
visual acuity in comparison to metal halide and fluorescent light fittings)
• L70 rated for minimum 100,000hrs at 25°C• LM6 marine grade aluminium / powder coated• Certified to all applicable AS/NZ, European and
USA standards• Instant on / off• IP66 rated• IPART and VEET approved• Intelligent control & sensor options available
Operating voltage: 90-277VAC, 47-63HzPower factor: λ > 0.90Operating Temperature: -40 ⁰ C to 45 ⁰ C
Weight: 9.4kgMounting: Eye, bracket, ceiling plate, ezystrut Cabling: 3m PVC cable + 3 pin plug (std)Housing: Marine grade powder coated “copper free“ aluminium Enclosure: 1150 Aluminium powdercoated white glossLens: Clear or diffused acrylic, polycarbonate
LED Highbaypremium
with Food Safe Enclosure
www.aqualuma.com 1300 145 555
Features Electrical Specifications
Mechanical Information
IES INDOOR REPORTPHOTOMETRIC FILENAME : AQHBH12557CA-EU-LB.IES
POLAR GRAPH
1598
3195
4793
6390
1
2
Maximum Candela = 6390 Located At Horizontal Angle = 0, Vertical Angle = 55# 1 - Vertical Plane Through Horizontal Angles (0 - 180) (Through Max. Cd.)# 2 - Horizontal Cone Through Vertical Angle (55) (Through Max. Cd.)
Photometric Toolbox Professional Edition - Copyright 2002-2015 by Lighting Analysts, Inc.Calculations based on published IES Methods and recommendations, values rounded for display purposes.Results derived from content of manufacturers photometric file.
Page 1
IES INDOOR REPORTPHOTOMETRIC FILENAME : AQHB16557CA-EU-STM.IES
POLAR GRAPH
2153
4306
6458
8611
1
2
Maximum Candela = 8611 Located At Horizontal Angle = 0, Vertical Angle = 20# 1 - Vertical Plane Through Horizontal Angles (0 - 180) (Through Max. Cd.)# 2 - Horizontal Cone Through Vertical Angle (20) (Through Max. Cd.)
Photometric Toolbox Professional Edition - Copyright 2002-2015 by Lighting Analysts, Inc.Calculations based on published IES Methods and recommendations, values rounded for display purposes.Results derived from content of manufacturers photometric file.
Page 1
MADE90W125W
L70>100,000
HOURS7YR
WARRANTYIP66RATED
162LPW
veet & ipartapproved
LED Light Source Lumileds
Colour Temp (Tc) 5000 Kelvin
CRI CRI > 80
Lens Options Clear Acrylic Diffuse Acrylic
Luminous Flux 16,130lm (127lm/w) 15,623lm (123lm/w)
LED Current / LED 130W
Input Voltage 90V-277V 47-63Hz
Warranty 3 year
Lens Options Clear or diffused acrylic
• One for one replacement for 400W metal halide light fittings
• Output flux 16,130 lm• Luminaire efficacy up to 127 lm/W• Full spectrum colour rendering (improved
visual acuity in comparison to metal halide and fluorescent light fittings)• LM6 marine grade aluminium / powder coated• Certified to all applicable AS/NZ standards• Instant on / off• Sensor options available• IP66 rated• IPART approved• VEET approved • No flicker
Our market research indicated a high demand for a suitable alternative to the Aqualuma premium Highbay range. To facilitate this need Aqualuma has developed the Litebay, an Australian made and warrantied Highbay. The Litebay has been created with the same quality and ingenuity Aqualuma is renowned for, but at a very competitive price. The 130W Litebay produces an impressive 16,130 lumen’s providing an ideal light for light replacement solution for the commercial & industrial sector.
www.aqualuma.com 1300 145 555
Specifications
Features
LED Highbaylitebay
Operating voltage: 90-277VAC, 47-63HzPower factor: λ > 0.99Operating Temperature: -40 ⁰ C to 45 ⁰ C
Weight: 7.5kgMounting: Eye, bracket, ceiling plate, ezystrut Cabling: 3m PVC cable + 3 pin plug (std) Housing: Marine grade powder coated “copper free“ aluminium Lens: Clear or diffused acrylic
Electrical Specifications
Mechanical Information
IES INDOOR REPORTPHOTOMETRIC FILENAME : AQLB13050CA-EU.IES
POLAR GRAPH
1347
2695
4042
5389
1
2
Maximum Candela = 5389.28 Located At Horizontal Angle = 0, Vertical Angle = 4# 1 - Vertical Plane Through Horizontal Angles (0 - 180) (Through Max. Cd.)# 2 - Horizontal Cone Through Vertical Angle (4) (Through Max. Cd.)
Photometric Toolbox Professional Edition - Copyright 2002-2015 by Lighting Analysts, Inc.Calculations based on published IES Methods and recommendations, values rounded for display purposes.Results derived from content of manufacturers photometric file.
Page 1
MADE130W 3YRWARRANTY
IP66RATED
127LPW
REPLACES
METAL400W
HALIDE
veet & ipartapproved
Dimensions - all highbay models
Eye mount (standard mount) 316 marine grade stainless steel eye mount
Bracket mount (full 360˚rotation) Powder coated aluminium bracket
Ceiling plate
Clear acrylic lens, diffuse acrylic lens, polycarbonate lens
Ezystrut mount
www.aqualuma.com 1300 145 555
Highbay with Uplight
Highbay - High OutputMounting options - all highbay models
Eye hook (standard mount)
Ø 407mm(16″ in)
Bracket mount Ceiling plate
The all new Aqualuma LED Highbay with uplight has given our world renowned Highbay a new dimension. The Aqualuma LED uplight is compatible with all versions of the premium LED Highbay. The Highbay with uplight has been designed specifically for the “Big Box Retail” sector where studies have shown a negative correlation between un-lit ceilings and shopper comfort, and therefore time spent in the store.
The Aqualuma LED Highbay - high output is part of the premium commercial range and is designed specifically to replace 1000W metal halide or induction lighting used in high indoor and outdoor applications. Ideally suited for use in factories and warehouses with approximate heights between 10-30m.
• Provides simultaneous down and uplighting for retail and warehousing
• 90W, 125W, 165W & 185W versions available (highbay) + 20W uplight
• Output flux up to 25,600lm (highbay), 2000lm (uplight)
• Wall plug efficacy up to 144lm/W• L70 rated for minimum 100,000hrs at 25°C• LM6 marine grade aluminium / powder coated• 7 year warranty• Instant on / off• IP 64• No flicker
Features
• Replaces up to 1000W metal halide light fittings• 200W, 225W & 250W versions available• Output Flux up to 32,497 lm• Efficacy up to 132lm/W• Full spectrum colour rendering results in improved
visual acuity in comparison to metal halide and fluorescent light fittings
• L70 rated for minimum 100,000hrs at 25°C• LM6 marine grade aluminium / powder coated• 7 year warranty• Instant on / off• IP66 rated• No flicker
Features
Ø 407mm(16″ in)
Ø 407mm(16″ in)
Ø 2
12m
m Ø 3
28m
m
Ø 1
87m
m
(7.3
″ in)
(12.
9″ in
)
(7.4
″ in)
LED Light Source Lumileds
Colour Temp (Tc) 5000 Kelvin
CRI CRI 75
Luminous Flux from 13,500lm to 23,095lm
LED Current / LED 90W, 125W, 165W
Input Voltage 90V-277V 47-63Hz
Warranty 5 year
Lens Options Toughened glass, Polycarbonate, Clear or Diffuse Acrylic
Mounting Options Surface mount or with stand off frame
• Provides lighting for food preparation facilities, commercial cold stores and service station forecourts
• 90W, 125W & 165W versions available• Output flux from 13,500lm to 23,095lm• Luminaire efficacy up to 150lm/W• 6063 T5 aluminium, white powder coated and
ABS componentry • 5 year warranty• Instant on / off• Food Grade certification• IP65 rated• IPART Approved• VEET Approved
The all new Aqualuma Food & Petroleum Grade Canopy Light has been designed for both new builds and retro fitting into food processing facilities, commercial cold stores, fuel station forecourts, and other canopy roofs. The Canopy light allows for ease of installation and can be surface mounted on multiple ceiling types including concrete or sandwich panel. The slim low-profile design requires very low maintenance and continues Aqualuma’s renowned product reliability and energy efficiency.
www.aqualuma.com 1300 145 555
Specifications
Features
LED Canopyfood & petroleum grade
Operating voltage: 90-277VAC, 47-63HzPower factor: λ > 0.96Operating Temperature: -40 ⁰ C to 45 ⁰ C
Weight: Slimline=6.5kg / with stand off frame=8kgMounting: Surface mount or with stand off frameCabling: 1.5m cable rated to -40 ⁰ C to 75 ⁰ C (std) Housing: 6063 T5 aluminium, white powder coated and polycarbonate componentryLens: Hardened acrylic, UV Polycarbonate, Toughened Glass
Electrical Specifications
Mechanical Information
IES INDOOR REPORTPHOTOMETRIC FILENAME : LL19935-R01.IES
POLAR GRAPH
2024
4047
6071
8094
1
2
Maximum Candela = 8094.1 Located At Horizontal Angle = 67.5, Vertical Angle = 3# 1 - Vertical Plane Through Horizontal Angles (67.5 - 247.5) (Through Max. Cd.)# 2 - Horizontal Cone Through Vertical Angle (3) (Through Max. Cd.)
Photometric Toolbox Professional Edition - Copyright 2002-2015 by Lighting Analysts, Inc.Calculations based on published IES Methods and recommendations, values rounded for display purposes.Results derived from content of manufacturers photometric file.
Page 1
MADEFOODSAFE
90W125W165W
5YRWARRANTY
IP65RATED
150LPW
veet & ipartapproved
Dimensions - FGP Canopy Light
www.aqualuma.com 1300 145 555
Lighting Design Service
73m
23.5m
7.8m
8.1m
MH: 6
HB1
HB1M
H: 6
HB1M
H: 6
MH: 6
HB1
HB1M
H: 6
MH: 6
HB1
HB1M
H: 6
MH: 6
HB1
MH: 6
HB1
HB1M
H: 6
MH: 6
HB1
MH: 6
HB1
MH: 6
HB1
HB1M
H: 6
HB1M
H: 6
MH: 6
HB1
MH: 6
HB1
HB1M
H: 6
MH: 6
HB1
MH: 6
HB1
MH: 6
HB1
MH: 6
HB1
MH: 6
HB1
MH: 6
HB1
MH: 6
HB1
HB1M
H: 6
144194
226216
215233
238218
216226
206156
197286
325297
290335
343297
290325
305221
234335
374356
346386
393353
350374
354264
224309
360342
335370
377340
338362
328247
215287
335327
323349
355326
325338
304234
233328
377355
346389
395355
349379
348259
250355
395379
369410
417376
373399
375281
228316
366347
339377
383347
342368
335252
217287
335327
325349
355328
325338
304236
233326
375354
347387
392354
348377
346258
252356
399380
370411
418377
373399
376282
230319
369349
343381
390349
344371
342254
218287
335327
326349
355329
326338
304236
232323
372352
345384
389352
347374
343256
252356
399380
370411
418377
374399
376282
232323
372351
345384
389352
346374
342256
218287
335327
326349
355329
326338
304236
230320
370350
343382
390350
345372
342254
252356
399380
370411
418377
374399
376282
233325
374353
347386
391354
348376
345258
218287
335327
326349
355329
326338
304236
229317
367348
342378
388348
343370
339252
252356
399379
370411
417377
373399
376282
234328
377355
348388
394355
349378
348259
217287
335327
325349
356329
326339
304236
227313
364345
338375
385346
341366
336250
251355
394378
369410
417376
373399
375281
235330
378356
350390
396357
351381
351261
216286
335326
324349
356328
325339
305236
222305
357340
335371
378343
339360
329248
234332
375360
359408
415375
372398
374280
197285
323318
324381
398356
352383
353263
140189
220211
278326
350327
326340
306235
335359
339336
358323
245
352379
357353
375355
266
312338
305299
335315
229
215241
227225
239218
164Aqualuma offers a lighting design service to ensure that your conversion to energy efficient lighting maintains or improves your current lighting situation. Aqualuma’s vast knowledge in the commercial and industrial sector allows us to best meet and exceed your needs across multiple environments, whilst ensuring your illumination meets relevant applicable regional standards.
For more information regarding our lighting design services please vist www.aqualuma.com or call us at 1300 145 555 to speak with one of our trained sales consultants.
• Design service for new builds• Design service for retrofit • Fixture optimisation• Correct fixture selection for area or project• 3D renders• Lux readings point by point• Isoline graphs• Average / uniform lux levels across area or project
Lighting design service offers:
Point by point lux readings
Mounting options - FGP Canopy Light
Please Note: It is the responsibility of the installer to ensure that the appropriate hardware is used to fix the luminaire to the ceiling. Holes have been sized for a M5 Tech Screw.
Stand Off Frame: Allows install into surfaces where surface mount option is not available such as concrete slabs or any material where ceiling access is limited. Stand off frame sold as an optional extra.
Surface Mount - Slimline: Allows for a clean visually appealing surface install where the driver can placed upright into the ceiling cavity. Plastic caps are provided to conceal the screw heads once securely tightened.
Completed Projects
www.aqualuma.com 1300 145 555
124 Siganto Drive, Helensvale, Queensland, Australia 4212
Ph: 1300 14 55 55 | [email protected] | WWW.AQUALUMA.COM
*All information contained in this brochure is correct at time of publication. All specifications are subject to change.