August 2014 power point polling - basics

11
Welcome PowerPoint Polling – New Users Tuesday August 26, 2014

description

The PowerPoint Polling Basic Training class is designed to get new users up and running using the basics of this polling environment. The ultimate goal of the training is for users to feel confident to immediately use the PowerPoint Polling application for basic polling. Topics Include: -Downloading the TurningPoint Software -TurningPoint Dashboard -Hardware Setup -Building Basic Slides -Running a Presentation -Saving Session Data

Transcript of August 2014 power point polling - basics

Page 1: August 2014   power point polling - basics

WelcomePowerPoint Polling – New UsersTuesday August 26, 2014

Page 2: August 2014   power point polling - basics

Derrick Abram – TrainerTurning Technologies Canada

888-522-8689 x [email protected]

Page 3: August 2014   power point polling - basics

Agenda

• Downloading TurningPoint• Hardware Setup• TurningPoint Dashboard• Building basic polling slides• Running a Presentation• Saving Session Data• Basic Reporting

Page 4: August 2014   power point polling - basics

Hardware Setup

RF+ Receiver ResponseCard LCDResponseCard NXT

RF ReceiverResponseCard

Page 5: August 2014   power point polling - basics

TurningPoint Dashboard

Page 6: August 2014   power point polling - basics

Where is our office located?

1. Toronto2. Barrie3. Ottawa4. Vancouver

1. 2. 3. 4.

0% 0%0%0%

Page 7: August 2014   power point polling - basics

Where is our office located?

1. Toronto2. Barrie3. Ottawa4. Vancouver

1. 2. 3. 4.

0% 0%0%0%

Page 8: August 2014   power point polling - basics

Saving Your Session1. After you have completed your presentation select Save -> Save Session from

the TurningPoint Toolbar. *IMPORTANT* Saving your PowerPoint presentation will NOT save your session data.

2. Give the session file a name. It will be store locally on the computer that ran the presentation (My Documents\TurningPoint 5\Sessions).

3. You can safely close your presentation.

Page 9: August 2014   power point polling - basics

Resetting Your Presentation (before you begin)

1. Resetting your presentation tells TurningPoint to start the presentation “new” as of this point.

2. Reset your presentation by selecting Reset -> Reset Session.3. If you have not saved your session data you will be prompted to do so.4. You will see all your charts clear out to show 0%, countdown timers will reset as

well.

Page 10: August 2014   power point polling - basics

Reporting

1. On the TurningPoint Dashboard click the “Manage” tab.2. From the left select the session you would like to report

on.3. Click the “Reports” button on the lower right corner.4. Select the report type from the upper left drop down

menu and use the check boxes to customize the information displayed.

5. Reports can be printed or exported to various formats using the menu found at the top of the report window.

Page 11: August 2014   power point polling - basics

Thank YouDerrick Abram – TrainerTurning Technologies Canada888-522-8689 x [email protected]