August 2007

61
BS 7375 ..............................................................29 BS 7535 ..............................................................39 BS 7609 ..............................................................29 BS 7629 ..............................................................34 BS 7654 ..............................................................29 BS 7713 ..............................................................34 BS 7727 ..............................................................29 BS 7870 ..............................................................29 BS 7917 ..............................................................22 BS 7987 ..............................................................30 BS 9210 ..............................................................38 BS 9210 N007 ....................................................30 BS 9210 N0009 ..................................................30 BS 9220 N001 ....................................................30 BS 9220 N002 ....................................................30 BS 9220 N003 ....................................................30 BS 9220 N004 ....................................................30 BS EN 12464 ......................................................23 BS EN 50083 ......................................................16 BS EN 50144 ......................................................16 BS EN 60034 ................................................16, 22 BS EN 60269 ................................................12, 16 BS EN 60309 ......................................................22 BS EN 60335 ....................................21, 22, 39, 40 BS EN 60445 ......................................................16 BS EN 60679 ......................................................16 BS EN 60730 ......................................................22 BS EN 60745 ..........................................16, 17, 22 BS EN 60947 ......................................................22 BS EN 61300 ......................................................21 BS EN 61747 ................................................17, 40 BS EN 61988 ......................................................17 BS EN 62056 ......................................................21 BS EN 62282 ......................................................22 DD ENV 13106 ...................................................40 DD ENV 13777 ...................................................40 BS IEC 60191 .........................................19, 22, 39 BS IEC 60287 ......................................................19 DD IEC/TS 60479 ................................................21 PD 6541 .......................................................19, 40 PD 6590 .......................................................19, 40 PD CLC/TR 50459 ...............................................16 PD CLC/TR 50473 .........................................19, 40 PD CLC/TR 50479 .........................................19, 40 PD CLC/TR 50501 ...............................................16 Engineering BS 10 ..................................................................23 BS 46 ..................................................................36 BS 57 ..................................................................36 BS 93 ..................................................................36 BS 325 ................................................................36 BS 341 ................................................................23 BS 426 ................................................................23 BS 450 ................................................................36 BS 768 ................................................................36 BS 1083 ..............................................................36 BS 1089 ..............................................................24 BS 1104 ..............................................................36 BS 1306 ..............................................................24 BS 1580 ..............................................................24 BS 1660 ..............................................................24 BS 1768 ..............................................................37 BS 1769 ..............................................................37 BS 1802 ..............................................................37 BS 1804 ..............................................................37 BS 1935 ..............................................................24 BS 1936 ..............................................................24 BS 1983 ........................................................24, 25 BS 2059 ..............................................................25 BS 2548 ..............................................................31 BS 2837 ..............................................................31 BS 3130 ..............................................................31 BS 3313 ..............................................................31 BS 3936 ..............................................................12 BS 4602 ..............................................................32 BS 5609 ..............................................................33 BS 5740 ..............................................................33 BS 6396 ..............................................................40 BS 6407 ..............................................................33 BS 6499 ..............................................................33 BS 6652 ..............................................................33 BS 6720 ..............................................................33 BS 6837 ..............................................................33 BS 6884 ..............................................................33 BS 6965 ..............................................................33 BS 7116 ..............................................................33 BS 7195 ..............................................................33 BS 7289 ..............................................................33 BS 7379 ..............................................................33 BS 7539 ..............................................................33 BS 7611 ..............................................................33 BS 7921 ..............................................................34 DD 263 ...............................................................20 BS EN ISO 6579 ..................................................54 BS EN ISO 11810 ..........................................14, 20 BS EN 12572 ................................................14, 39 BS EN 13834 ......................................................15 BS EN 50132 ......................................................39 DD ENV 13834 ...................................................15 BS ISO 3045 .......................................................35 BS ISO 3053 .......................................................35 BS ISO 3063 .......................................................35 BS ISO 3809 .......................................................35 BS ISO 4718 .......................................................35 BS ISO 4724 .......................................................35 BS ISO 4725 .......................................................35 BS ISO 4730 .......................................................35 BS ISO 4733 .......................................................35 BS ISO 7004 .......................................................35 BS ISO 7589 .......................................................35 BS ISO 9236 .......................................................36 BS ISO 9843 .......................................................36 BS ISO 10330 .....................................................36 BS ISO 10349 .....................................................36 BS ISO 17531 .....................................................36 BS ISO 18054 .....................................................36 BS ISO 18055 .....................................................36 BS ISO 19012 .....................................................18 BS ISO 21015 .....................................................18 BS ISO 21389 .....................................................36 BS ISO 22972 .....................................................36 Electrotechnical BS 88 ............................................................12, 23 BS 714 ................................................................24 BS 1361 ..............................................................12 BS 1362 ..............................................................24 BS 2618 ..............................................................31 BS 2692 ..............................................................25 BS 2950 ..............................................................25 BS 3036 ..............................................................25 BS 3934 ........................................................19, 39 BS 4363 ..............................................................26 BS 4727 ..............................................................39 BS 5486 ..............................................................39 BS 5564 ..............................................................28 BS 6480 ..............................................................38 BS 6724 ..............................................................33 BS 6885 ..............................................................29 The following British Standards are listed or referred to in this issue of Update Standards with the exception of those in ‘New Work Started’. Building and civil engineering BS 594 ..........................................................12, 38 BS 747 ................................................................38 BS 1139 ..............................................................31 BS 1494 ..............................................................24 BS 1722 .................................................24, 31, 36 BS 2830 ..............................................................31 BS 3470 ..............................................................37 BS 3533 ..............................................................25 BS 3572 ..............................................................25 BS 3678 ..............................................................26 BS 3958 ..............................................................26 BS 4074 ..............................................................26 BS 4092 ..............................................................26 BS 4154 ..............................................................37 BS 4203 ..............................................................38 BS 4508 ..............................................................27 BS 4904 ..............................................................27 BS 4987 ........................................................12, 39 BS 5250 ..............................................................33 BS 5422 ..............................................................33 BS 5427 ..............................................................33 BS 5615 ..............................................................28 BS 5803 ..............................................................28 BS 5925 ..............................................................33 BS 5970 ..............................................................33 BS 5974 ..............................................................33 BS 5975 ..............................................................33 BS 6100 ........................................................12, 39 BS 6993 ..............................................................29 BS 7206 ........................................................14, 39 BS 7386 ..............................................................29 BS 7880 ..............................................................30 BS 7955 ..............................................................30 BS 8207 ..............................................................30 BS 8211 ..............................................................30 BS 8219 ..............................................................30 BS 594987 .............................................12, 38, 39 DD CEN ISO/TS 22475 ........................................19 DD 7995 .............................................................30 BS EN 1996 ........................................................20 BS EN 12897 ................................................14, 39 BS EN 13084 ......................................................14 BS EN 13433 ......................................................14 BS EN 13434 ......................................................15 BS EN 13508 ......................................................21 BS EN 13577 ......................................................15 BS EN 13707 ......................................................38 BS EN 13808 ......................................................22 BS EN 14843 ......................................................15 BS EN 14844 ......................................................15 BS EN 14992 ......................................................15 BS EN 15050 ......................................................15 BS EN 15200 ......................................................15 BS EN 15304 ......................................................16 PD 6680 .............................................................30 PD 6688 .............................................................21 PD 6691 .............................................................19 Consumer products and services BS 1133 ..............................................................31 BS 1384 ..............................................................31 BS 1679 ..............................................................31 BS 1683 ..............................................................31 BS 1702 ..............................................................31 BS 2003 ..............................................................31 British Standards – Quick Reference Guide 4 Update Standards Aug 2007 Prices may be subject to change.

Transcript of August 2007

Page 1: August 2007

BS 7375 ..............................................................29BS 7535 ..............................................................39BS 7609 ..............................................................29BS 7629 ..............................................................34BS 7654 ..............................................................29BS 7713 ..............................................................34BS 7727 ..............................................................29BS 7870 ..............................................................29BS 7917 ..............................................................22BS 7987 ..............................................................30BS 9210 ..............................................................38BS 9210 N007 ....................................................30BS 9210 N0009 ..................................................30BS 9220 N001 ....................................................30BS 9220 N002 ....................................................30BS 9220 N003 ....................................................30BS 9220 N004 ....................................................30BS EN 12464 ......................................................23BS EN 50083 ......................................................16BS EN 50144 ......................................................16BS EN 60034 ................................................16, 22BS EN 60269 ................................................12, 16BS EN 60309 ......................................................22BS EN 60335 ....................................21, 22, 39, 40BS EN 60445 ......................................................16BS EN 60679 ......................................................16BS EN 60730 ......................................................22BS EN 60745 ..........................................16, 17, 22BS EN 60947 ......................................................22BS EN 61300 ......................................................21BS EN 61747 ................................................17, 40BS EN 61988 ......................................................17BS EN 62056 ......................................................21BS EN 62282 ......................................................22DD ENV 13106 ...................................................40DD ENV 13777 ...................................................40BS IEC 60191 .........................................19, 22, 39BS IEC 60287 ......................................................19DD IEC/TS 60479 ................................................21PD 6541 .......................................................19, 40PD 6590 .......................................................19, 40PD CLC/TR 50459 ...............................................16PD CLC/TR 50473 .........................................19, 40PD CLC/TR 50479 .........................................19, 40PD CLC/TR 50501 ...............................................16

Engineering

BS 10 ..................................................................23BS 46 ..................................................................36BS 57 ..................................................................36BS 93 ..................................................................36BS 325 ................................................................36BS 341 ................................................................23BS 426 ................................................................23BS 450 ................................................................36BS 768 ................................................................36BS 1083 ..............................................................36BS 1089 ..............................................................24BS 1104 ..............................................................36BS 1306 ..............................................................24BS 1580 ..............................................................24BS 1660 ..............................................................24BS 1768 ..............................................................37BS 1769 ..............................................................37BS 1802 ..............................................................37BS 1804 ..............................................................37BS 1935 ..............................................................24BS 1936 ..............................................................24BS 1983 ........................................................24, 25BS 2059 ..............................................................25

BS 2548 ..............................................................31BS 2837 ..............................................................31BS 3130 ..............................................................31BS 3313 ..............................................................31BS 3936 ..............................................................12BS 4602 ..............................................................32BS 5609 ..............................................................33BS 5740 ..............................................................33BS 6396 ..............................................................40BS 6407 ..............................................................33BS 6499 ..............................................................33BS 6652 ..............................................................33BS 6720 ..............................................................33BS 6837 ..............................................................33BS 6884 ..............................................................33BS 6965 ..............................................................33BS 7116 ..............................................................33BS 7195 ..............................................................33BS 7289 ..............................................................33BS 7379 ..............................................................33BS 7539 ..............................................................33BS 7611 ..............................................................33BS 7921 ..............................................................34DD 263 ...............................................................20BS EN ISO 6579 ..................................................54BS EN ISO 11810 ..........................................14, 20BS EN 12572 ................................................14, 39BS EN 13834 ......................................................15BS EN 50132 ......................................................39DD ENV 13834 ...................................................15BS ISO 3045 .......................................................35BS ISO 3053 .......................................................35BS ISO 3063 .......................................................35BS ISO 3809 .......................................................35BS ISO 4718 .......................................................35BS ISO 4724 .......................................................35BS ISO 4725 .......................................................35BS ISO 4730 .......................................................35BS ISO 4733 .......................................................35BS ISO 7004 .......................................................35BS ISO 7589 .......................................................35BS ISO 9236 .......................................................36BS ISO 9843 .......................................................36BS ISO 10330 .....................................................36BS ISO 10349 .....................................................36BS ISO 17531 .....................................................36BS ISO 18054 .....................................................36BS ISO 18055 .....................................................36BS ISO 19012 .....................................................18BS ISO 21015 .....................................................18BS ISO 21389 .....................................................36BS ISO 22972 .....................................................36

Electrotechnical

BS 88 ............................................................12, 23BS 714 ................................................................24BS 1361 ..............................................................12BS 1362 ..............................................................24BS 2618 ..............................................................31BS 2692 ..............................................................25BS 2950 ..............................................................25BS 3036 ..............................................................25BS 3934 ........................................................19, 39BS 4363 ..............................................................26BS 4727 ..............................................................39BS 5486 ..............................................................39BS 5564 ..............................................................28BS 6480 ..............................................................38BS 6724 ..............................................................33BS 6885 ..............................................................29

The following British Standards are listed orreferred to in this issue of Update Standardswith the exception of those in ‘New WorkStarted’.

Building and civil engineering

BS 594 ..........................................................12, 38BS 747 ................................................................38BS 1139 ..............................................................31BS 1494 ..............................................................24BS 1722 .................................................24, 31, 36BS 2830 ..............................................................31BS 3470 ..............................................................37BS 3533 ..............................................................25BS 3572 ..............................................................25BS 3678 ..............................................................26BS 3958 ..............................................................26BS 4074 ..............................................................26BS 4092 ..............................................................26BS 4154 ..............................................................37BS 4203 ..............................................................38BS 4508 ..............................................................27BS 4904 ..............................................................27BS 4987 ........................................................12, 39BS 5250 ..............................................................33BS 5422 ..............................................................33BS 5427 ..............................................................33BS 5615 ..............................................................28BS 5803 ..............................................................28BS 5925 ..............................................................33BS 5970 ..............................................................33BS 5974 ..............................................................33BS 5975 ..............................................................33BS 6100 ........................................................12, 39BS 6993 ..............................................................29BS 7206 ........................................................14, 39BS 7386 ..............................................................29BS 7880 ..............................................................30BS 7955 ..............................................................30BS 8207 ..............................................................30BS 8211 ..............................................................30BS 8219 ..............................................................30BS 594987 .............................................12, 38, 39DD CEN ISO/TS 22475 ........................................19DD 7995 .............................................................30BS EN 1996 ........................................................20BS EN 12897 ................................................14, 39BS EN 13084 ......................................................14BS EN 13433 ......................................................14BS EN 13434 ......................................................15BS EN 13508 ......................................................21BS EN 13577 ......................................................15BS EN 13707 ......................................................38BS EN 13808 ......................................................22BS EN 14843 ......................................................15BS EN 14844 ......................................................15BS EN 14992 ......................................................15BS EN 15050 ......................................................15BS EN 15200 ......................................................15BS EN 15304 ......................................................16PD 6680 .............................................................30PD 6688 .............................................................21PD 6691 .............................................................19

Consumer products and services

BS 1133 ..............................................................31BS 1384 ..............................................................31BS 1679 ..............................................................31BS 1683 ..............................................................31BS 1702 ..............................................................31BS 2003 ..............................................................31

British Standards – Quick Reference Guide

4 Update Standards Aug 2007Prices may be subject to change.

Page 2: August 2007

BS EN ISO 16426 ................................................42BS EN ISO 16582 ................................................42BS EN ISO 16583 ................................................42BS EN ISO 16584 ................................................42BS EN ISO 16585 ................................................42BS EN ISO 17776 ................................................35BS EN 22339 ......................................................42BS EN 22340 ......................................................42BS EN 22341 ......................................................42BS EN ISO 23429 ................................................42BS EN 24766 ......................................................42BS EN 25827 ......................................................35BS EN 27434 ......................................................42BS EN 27435 ......................................................42BS EN 27436 ......................................................42BS EN 27931 ......................................................35BS EN 28167 ......................................................35BS EN 28206 ......................................................35BS EN 28430 ......................................................35BS EN 28736 ......................................................42BS EN 28737 ......................................................42BS EN 28738 ......................................................42BS EN 28749 ......................................................42BS EN 29090 ......................................................35BS EN 29313 ......................................................35BS EN 29454 ......................................................35BS EN 29455 ......................................................35BS EN 61526 ................................................17, 21BS ISO 2328 .......................................................17BS ISO 3739 .................................................17, 40BS ISO 4000 .................................................17, 40BS ISO 4409 .................................................17, 39BS ISO 7634 .......................................................17BS ISO 10275 .....................................................18BS ISO 10813 .....................................................21BS ISO 11783 .....................................................18BS ISO 13769 .....................................................17BS ISO 15072 .....................................................21BS ISO 15663 .....................................................36BS ISO 16110 .....................................................18BS ISO 23309 .....................................................19BS IEC 61526 ......................................................17DD ISO/TS 15510 ................................................18DD ISO/TS 28923 ................................................19DD ISO/TS 28924 ................................................19PD 6494 .............................................................30PD 6507 .............................................................30BS 4N 100 ..........................................................22BS MA 5 .............................................................30BS MA 57 ...........................................................30BS AU 50 ......................................................17, 40BS AU 193 ..........................................................30BS AU 237 ..........................................................30BS AU 258 ..........................................................31

Health and environment

BS 476 ................................................................23BS 1694 ..............................................................24BS 1765 ..............................................................24BS 1895 ..............................................................24BS 1979 ..............................................................24BS 2099 ..............................................................25BS 2483 ..............................................................25BS 2718 ..............................................................25BS 2838 ..............................................................25BS 2891 ..............................................................25BS 2893 ..............................................................25BS 3265 ..............................................................37BS 3286 ..............................................................37BS 3314 ..............................................................25

BS EN 1327 ........................................................34BS EN 1661 ........................................................40BS EN 1662 ........................................................40BS EN 1663 ........................................................40BS EN 1664 ........................................................40BS EN 1665 ........................................................40BS EN 1757 ........................................................34BS EN 1949 ........................................................34BS EN ISO 2338 ..................................................41BS EN ISO 3506 ..................................................41BS EN ISO 3677 ..................................................34BS EN ISO 4762 ..................................................41BS EN ISO 6520 ..................................................34BS EN ISO 7040 ..................................................41BS EN ISO 7042 ..................................................41BS EN ISO 7287 ..................................................34BS EN ISO 7380 ..................................................41BS EN ISO 7719 ..................................................41BS EN ISO 8205 ..................................................34BS EN ISO 8733 ..................................................41BS EN ISO 8734 ..................................................41BS EN ISO 8735 ..................................................41BS EN ISO 8739 ..................................................41BS EN ISO 8740 ..................................................41BS EN ISO 8741 ..................................................41BS EN ISO 8742 ..................................................41BS EN ISO 8743 ..................................................41BS EN ISO 8744 ..................................................41BS EN ISO 8745 ..................................................41BS EN ISO 8746 ..................................................41BS EN ISO 8747 ..................................................41BS EN ISO 9312 ..................................................34BS EN ISO 9455 ..................................................34BS EN 10067 ......................................................34BS EN 10240 ......................................................34BS EN 10289 ......................................................34BS EN 10290 ......................................................34BS EN 10296 ......................................................39BS EN 10297 ......................................................39BS EN 10301 ......................................................34BS EN 10305 ................................................20, 39BS EN ISO 10484 ................................................41BS EN ISO 10511 ................................................41BS EN ISO 10512 ................................................41BS EN ISO 10513 ................................................41BS EN ISO 10642 ................................................41BS EN ISO 10684 ................................................41BS EN ISO 11161 ................................................14BS EN ISO 12224 ................................................35BS EN 12413 ......................................................14BS EN 13042 ......................................................14BS EN 13480 ......................................................20BS EN 13525 ......................................................21BS EN ISO 13769 ................................................17BS EN 13799 ......................................................21BS EN 14398 ......................................................21BS EN ISO 14577 ................................................15BS EN 14587 ......................................................15BS EN 15099 ......................................................15BS EN 15153 ......................................................15BS EN 15272 ......................................................16BS EN ISO 15975 ................................................41BS EN ISO 15976 ................................................41BS EN ISO 15977 ................................................41BS EN ISO 15978 ................................................41BS EN ISO 15979 ................................................42BS EN ISO 15980 ................................................42BS EN ISO 15981 ................................................42BS EN ISO 15982 ................................................42BS EN ISO 15983 ................................................42BS EN ISO 15984 ................................................42

BS 2061 ..............................................................37BS 2485 ..............................................................25BS 2693 ..............................................................37BS 2827 ..............................................................37BS 3092 ..............................................................25BS 3170 ..............................................................25BS 3401 ..............................................................37BS 3403 ..............................................................25BS 3409 ..............................................................37BS 3410 ..............................................................37BS 3529 ..............................................................25BS 3537 ..............................................................25BS 3550 ..............................................................37BS 3551 ..............................................................25BS 3641 ..............................................................26BS 3692 ..............................................................26BS 3800 ..............................................................26BS 3884 ..............................................................26BS 4168 ..............................................................37BS 4174 ..............................................................37BS 4183 ..............................................................37BS 4185 ..............................................................26BS 4190 ..............................................................26BS 4235 ..............................................................26BS 4268 ..............................................................26BS 4278 ..............................................................26BS 4429 ..............................................................26BS 4442 ..............................................................27BS 4506 ..............................................................27BS 4581 ..............................................................27BS 4617 ........................................................17, 39BS 4656 ..............................................................27BS 4823 ..............................................................27BS 4929 ..............................................................38BS 4933 ..............................................................38BS 5045 ..............................................................27BS 5138 ..............................................................27BS 5186 ..............................................................28BS 5208 ..............................................................28BS 5326 ..............................................................28BS 5739 ..............................................................28BS 5871 ..............................................................12BS 5892 ..............................................................33BS 5998 ..............................................................28BS 6101 ..............................................................28BS 6140 ..............................................................20BS 6323 ..............................................................39BS 6364 ..............................................................28BS 6405 ..............................................................28BS 6683 ..............................................................28BS 6751 ..............................................................29BS 6880 ..............................................................33BS 6979 ..............................................................29BS 7167 ..............................................................29BS 7371 ..............................................................38BS 7644 ..............................................................29BS 7715 ..............................................................29BS 7724 ..............................................................38BS 7967 ..............................................................12BS 8487 ..............................................................12DD CEN ISO/TS 17845 ........................................35BS EN 1 ..............................................................21BS EN 203 ....................................................12, 39BS EN 449 ..........................................................34BS EN 484 ..........................................................34BS EN 498 ..........................................................34BS EN 730 ..........................................................34BS EN 860 ..........................................................14BS EN 1045 ........................................................34BS EN ISO 1234 ..................................................40BS EN 1326 ........................................................34

Update Standards Aug 2007 Prices may be subject to change. 5

British Standards – Quick Reference Guide continued...

Page 3: August 2007

BS 5122 ..............................................................27

BS 5173 ..............................................................27

BS 5244 ..............................................................28

BS 5342 ..............................................................28

BS 5409 ........................................................28, 38

BS 5470 ..............................................................28

BS 5471 ..............................................................28

BS 5551 ..............................................................33

BS 5842 ..............................................................28

BS 6127 ..............................................................28

BS 6380 ..............................................................28

BS 6523 ..............................................................40

BS 6898 ..............................................................29

BS 7067 ..............................................................29

BS 7442 ..............................................................33

BS 7530 ..............................................................29

BS 7989 ..............................................................30

DD CEN/TS 15590 ..............................................16

BS EN ISO 186 ....................................................34

BS EN 228 ..........................................................20

BS EN ISO 252 ....................................................14

BS EN ISO 283 ....................................................14

BS EN 589 ..........................................................20

BS EN 590 ..........................................................20

BS EN ISO 703 ....................................................14

BS EN 993 ....................................................20, 38

BS EN 1402 ..................................................20, 38

BS EN ISO 1924 ..................................................34

BS EN ISO 4119 ..................................................34

BS EN ISO 6504 ............................................14, 39

BS EN ISO 7214 ..................................................14

BS EN ISO 7823 ..................................................14

BS EN ISO 8501 ..................................................14

BS EN 12281 ......................................................35

BS EN 12766 ......................................................20

BS EN 12829 ......................................................41

BS EN 13405 ......................................................41

BS EN 13717 ......................................................41

BS EN 13773 ......................................................21

BS EN ISO 13936 ................................................41

BS EN 13955 ......................................................41

BS EN 13996 ......................................................41

BS EN 14154 ......................................................22

BS EN ISO 14453 ................................................35

BS EN 14704 ......................................................15

BS EN 14878 ......................................................15

BS EN ISO 15103 ................................................15

BS EN 15195 ......................................................15

BS EN 15206 ......................................................16

BS EN 15323 ......................................................16

BS EN ISO 16276 ................................................16

BS EN 20187 ......................................................35

BS EN 21974 ......................................................35

BS EN 23035 ......................................................35

DD ENV 12282 ...................................................35

BS ISO 2230 .......................................................35

BS ISO 6452 .......................................................17

BS ISO 8085 .......................................................21

BS ISO 9727 .................................................17, 18

BS ISO 10290 .....................................................42

BS ISO 14912 .....................................................21

BS ISO 15033 .....................................................18

BS ISO 15901 .....................................................21

BS ISO 20752 .....................................................18

BS ISO 24343 .....................................................19

BS AU 110 ..........................................................30

BS ISO/IEC 25020 ...............................................19BS ISO/IEC 25030 ...............................................19DD ISO/TS 19139 ................................................18PD ISO/IEC TR 24722 ..........................................19

Management systems

BS 4778 ..............................................................27BS 5192 ..............................................................32BS 5760 ..............................................................28BS 6079 ..............................................................28BS 6143 ..............................................................28BS 7000 ..............................................................29BS 7850 ..............................................................29DD 247 ...............................................................30BS EN ISO 80000 ..........................................17, 40BS ISO 31 ...............................................17, 19, 40BS ISO 80000 ...............................................19, 40PD 6584 .............................................................30BS OHSAS 18001 ................................................12

Materials and chemicals

BS 593 ................................................................23BS 615 ................................................................23BS 658 ................................................................23BS 675 ................................................................23BS 676 ................................................................23BS 692 ................................................................23BS 701 ................................................................23BS 718 ................................................................24BS 733 ................................................................24BS 753 ................................................................24BS 756 ................................................................24BS 791 ................................................................24BS 975 ................................................................24BS 976 ................................................................24BS 1016 ..............................................................24BS 1041 ..............................................................24BS 1365 ..............................................................24BS 1413 ..............................................................24BS 1428 ........................................................24, 36BS 1583 ..............................................................24BS 1900 ..............................................................24BS 1902 ..............................................................38BS 2000 ..............................................................20BS 2058 ..............................................................37BS 2069 ..............................................................25BS 2071 ..............................................................25BS 2842 ..............................................................25BS 3110 ..............................................................25BS 3202 ..............................................................25BS 3407 ..............................................................25BS 3423 ..............................................................25BS 3492 ..............................................................25BS 3553 ..............................................................25BS 3567 ..............................................................25BS 3649 ..............................................................26BS 3900 ...........................................14, 31, 32, 39BS 3903 ..............................................................32BS 3996 ..............................................................40BS 4040 ..............................................................26BS 4250 ..............................................................26BS 4258 ..............................................................32BS 4262 ..............................................................26BS 4267 ..............................................................32BS 4277 ..............................................................26BS 4367 ..............................................................32BS 4431 ..............................................................32BS 4651 ..............................................................32BS 4845 ..............................................................27BS 5074 ..............................................................27

BS 3475 ..............................................................25BS 3619 ..............................................................25BS 3622 ..............................................................26BS 4068 ..............................................................26BS 4110 ..............................................................26BS 4322 ..............................................................26BS 4886 ..............................................................27BS 5853 ..............................................................28BS 6069 ........................................................33, 34BS 6183 ..............................................................28BS 6336 ..............................................................28BS 6366 ..............................................................28BS 6401 ..............................................................28BS 6408 ..............................................................38BS 6526 ..............................................................28BS 6809 ..............................................................29BS 6859 ..............................................................29BS 6905 ..............................................................29BS 7028 ..............................................................29BS 7068 ..............................................................29BS 7152 ..............................................................38BS 7184 ..............................................................29BS 7904 ..............................................................30BS 7930 ..............................................................30BS 7971 ..............................................................30BS 8414 ..............................................................30DD 246 ...............................................................30DD 253 ...............................................................30BS EN 481 ....................................................33, 34BS EN 552 ..........................................................14BS EN 737 ..........................................................14BS EN 1666 ........................................................40BS EN 1667 ........................................................41BS EN ISO 4869 ..................................................23BS EN ISO 7396 ..................................................14BS EN ISO 11137 ................................................14BS EN 13501 ................................................15, 21BS EN 14042 ......................................................35BS EN 14044 ......................................................21BS EN 14591 ......................................................15BS EN 14983 ......................................................15BS EN 14994 ......................................................15BS EN ISO 15004 ................................................15BS EN 15614 ......................................................16BS EN ISO 19493 ................................................16BS EN ISO 20988 ................................................16BS EN 60976 ......................................................54BS EN 62464 ......................................................17BS EN ISO 80000 ..........................................17, 40BS ISO 31 ...............................................17, 19, 40BS ISO 5130 .......................................................17BS ISO 8995 .......................................................40BS ISO 16000 .....................................................18BS ISO 23470 .....................................................19PD CEN/TR 15592 ...............................................19PD 6498 .............................................................30PD 6508 .............................................................30PD 6520 .............................................................30PD ISO/TR 2801 ..................................................19PD ISO/TR 17737 ................................................19

Information systems

BS EN 1332 ..................................................14, 21BS EN 50173 ......................................................21BS ISO/IEC 15417 ...............................................18BS ISO/IEC 15459 ...............................................18BS ISO/IEC 16388 ...............................................18BS ISO/IEC TR 18047 ..........................................21BS ISO 19137 .....................................................18BS ISO/IEC 19794 ...............................................18

British Standards – Quick Reference Guide continued...

6 Update Standards Aug 2007Prices may be subject to change.

Page 4: August 2007

BS 4250 ..............................................................26BS 4258 ..............................................................32BS 4262 ..............................................................26BS 4267 ..............................................................32BS 4268 ..............................................................26BS 4277 ..............................................................26BS 4278 ..............................................................26BS 4322 ..............................................................26BS 4363 ..............................................................26BS 4367 ..............................................................32BS 4429 ..............................................................26BS 4431 ..............................................................32BS 4442 ..............................................................27BS 4506 ..............................................................27BS 4508 ..............................................................27BS 4581 ..............................................................27BS 4602 ..............................................................32BS 4617 ........................................................17, 39BS 4651 ..............................................................32BS 4656 ..............................................................27BS 4727 ..............................................................39BS 4778 ..............................................................27BS 4823 ..............................................................27BS 4845 ..............................................................27BS 4886 ..............................................................27BS 4904 ..............................................................27BS 4929 ..............................................................38BS 4933 ..............................................................38BS 4987 ........................................................12, 39BS 5045 ..............................................................27BS 5074 ..............................................................27BS 5122 ..............................................................27BS 5138 ..............................................................27BS 5173 ..............................................................27BS 5186 ..............................................................28BS 5192 ..............................................................32BS 5208 ..............................................................28BS 5244 ..............................................................28BS 5250 ..............................................................33BS 5326 ..............................................................28BS 5342 ..............................................................28BS 5409 ........................................................28, 38BS 5422 ..............................................................33BS 5427 ..............................................................33BS 5470 ..............................................................28BS 5471 ..............................................................28BS 5486 ..............................................................39BS 5551 ..............................................................33BS 5564 ..............................................................28BS 5609 ..............................................................33BS 5615 ..............................................................28BS 5739 ..............................................................28BS 5740 ..............................................................33BS 5760 ..............................................................28BS 5803 ..............................................................28BS 5842 ..............................................................28BS 5853 ..............................................................28BS 5871 ..............................................................12BS 5892 ..............................................................33BS 5925 ..............................................................33BS 5970 ..............................................................33BS 5974 ..............................................................33BS 5975 ..............................................................33BS 5998 ..............................................................28BS 6069 ........................................................33, 34BS 6079 ..............................................................28BS 6100 ........................................................12, 39BS 6101 ..............................................................28BS 6127 ..............................................................28BS 6140 ..............................................................20BS 6143 ..............................................................28

BS 2071 ..............................................................25BS 2099 ..............................................................25BS 2483 ..............................................................25BS 2485 ..............................................................25BS 2548 ..............................................................31BS 2618 ..............................................................31BS 2692 ..............................................................25BS 2693 ..............................................................37BS 2718 ..............................................................25BS 2827 ..............................................................37BS 2830 ..............................................................31BS 2837 ..............................................................31BS 2838 ..............................................................25BS 2842 ..............................................................25BS 2891 ..............................................................25BS 2893 ..............................................................25BS 2950 ..............................................................25BS 3036 ..............................................................25BS 3092 ..............................................................25BS 3110 ..............................................................25BS 3130 ..............................................................31BS 3170 ..............................................................25BS 3202 ..............................................................25BS 3265 ..............................................................37BS 3286 ..............................................................37BS 3313 ..............................................................31BS 3314 ..............................................................25BS 3401 ..............................................................37BS 3403 ..............................................................25BS 3407 ..............................................................25BS 3409 ..............................................................37BS 3410 ..............................................................37BS 3423 ..............................................................25BS 3470 ..............................................................37BS 3475 ..............................................................25BS 3492 ..............................................................25BS 3529 ..............................................................25BS 3533 ..............................................................25BS 3537 ..............................................................25BS 3550 ..............................................................37BS 3551 ..............................................................25BS 3553 ..............................................................25BS 3567 ..............................................................25BS 3572 ..............................................................25BS 3619 ..............................................................25BS 3622 ..............................................................26BS 3641 ..............................................................26BS 3649 ..............................................................26BS 3678 ..............................................................26BS 3692 ..............................................................26BS 3800 ..............................................................26BS 3884 ..............................................................26BS 3900 ...........................................14, 31, 32, 39BS 3903 ..............................................................32BS 3934 ........................................................19, 39BS 3936 ..............................................................12BS 3958 ..............................................................26BS 3996 ..............................................................40BS 4040 ..............................................................26BS 4068 ..............................................................26BS 4074 ..............................................................26BS 4092 ..............................................................26BS 4110 ..............................................................26BS 4154 ..............................................................37BS 4168 ..............................................................37BS 4174 ..............................................................37BS 4183 ..............................................................37BS 4185 ..............................................................26BS 4190 ..............................................................26BS 4203 ..............................................................38BS 4235 ..............................................................26

Alpha-numeric sequence of BritishStandards quoted in this issue

BS 10 ..................................................................23BS 46 ..................................................................36BS 57 ..................................................................36BS 88 ............................................................12, 23BS 93 ..................................................................36BS 325 ................................................................36BS 341 ................................................................23BS 426 ................................................................23BS 450 ................................................................36BS 476 ................................................................23BS 593 ................................................................23BS 594 ..........................................................12, 38BS 615 ................................................................23BS 658 ................................................................23BS 675 ................................................................23BS 676 ................................................................23BS 692 ................................................................23BS 701 ................................................................23BS 714 ................................................................24BS 718 ................................................................24BS 733 ................................................................24BS 747 ................................................................38BS 753 ................................................................24BS 756 ................................................................24BS 768 ................................................................36BS 791 ................................................................24BS 975 ................................................................24BS 976 ................................................................24BS 1016 ..............................................................24BS 1041 ..............................................................24BS 1083 ..............................................................36BS 1089 ..............................................................24BS 1104 ..............................................................36BS 1133 ..............................................................31BS 1139 ..............................................................31BS 1306 ..............................................................24BS 1361 ..............................................................12BS 1362 ..............................................................24BS 1365 ..............................................................24BS 1384 ..............................................................31BS 1413 ..............................................................24BS 1428 ........................................................24, 36BS 1494 ..............................................................24BS 1580 ..............................................................24BS 1583 ..............................................................24BS 1660 ..............................................................24BS 1679 ..............................................................31BS 1683 ..............................................................31BS 1694 ..............................................................24BS 1702 ..............................................................31BS 1722 .................................................24, 31, 36BS 1765 ..............................................................24BS 1768 ..............................................................37BS 1769 ..............................................................37BS 1802 ..............................................................37BS 1804 ..............................................................37BS 1895 ..............................................................24BS 1900 ..............................................................24BS 1902 ..............................................................38BS 1935 ..............................................................24BS 1936 ..............................................................24BS 1979 ..............................................................24BS 1983 ........................................................24, 25BS 2000 ..............................................................20BS 2003 ..............................................................31BS 2058 ..............................................................37BS 2059 ..............................................................25BS 2061 ..............................................................37BS 2069 ..............................................................25

Alpha-numeric sequence of British Standards

8 Update Standards Aug 2007Prices may be subject to change.

Page 5: August 2007

BS EN ISO 7042 ..................................................41BS EN ISO 7214 ..................................................14BS EN ISO 7287 ..................................................34BS EN ISO 7380 ..................................................41BS EN ISO 7396 ..................................................14BS EN ISO 7719 ..................................................41BS EN ISO 7823 ..................................................14BS EN ISO 8205 ..................................................34BS EN ISO 8501 ..................................................14BS EN ISO 8733 ..................................................41BS EN ISO 8734 ..................................................41BS EN ISO 8735 ..................................................41BS EN ISO 8739 ..................................................41BS EN ISO 8740 ..................................................41BS EN ISO 8741 ..................................................41BS EN ISO 8742 ..................................................41BS EN ISO 8743 ..................................................41BS EN ISO 8744 ..................................................41BS EN ISO 8745 ..................................................41BS EN ISO 8746 ..................................................41BS EN ISO 8747 ..................................................41BS EN ISO 9312 ..................................................34BS EN ISO 9455 ..................................................34BS EN 10067 ......................................................34BS EN 10240 ......................................................34BS EN 10289 ......................................................34BS EN 10290 ......................................................34BS EN 10296 ......................................................39BS EN 10297 ......................................................39BS EN 10301 ......................................................34BS EN 10305 ................................................20, 39BS EN ISO 10484 ................................................41BS EN ISO 10511 ................................................41BS EN ISO 10512 ................................................41BS EN ISO 10513 ................................................41BS EN ISO 10564 ................................................34BS EN ISO 10642 ................................................41BS EN ISO 10684 ................................................41BS EN ISO 11137 ................................................14BS EN ISO 11161 ................................................14BS EN ISO 11810 ..........................................14, 20BS EN ISO 12224 ................................................35BS EN 12281 ......................................................35BS EN 12413 ......................................................14BS EN 12464 ......................................................23BS EN 12572 ................................................14, 39BS EN 12766 ......................................................20BS EN 12829 ......................................................41BS EN 12897 ................................................14, 39BS EN 13042 ......................................................14BS EN 13084 ......................................................14BS EN 13405 ......................................................41BS EN 13433 ......................................................14BS EN 13434 ......................................................15BS EN 13480 ......................................................20BS EN 13501 ................................................15, 21BS EN 13508 ......................................................21BS EN 13525 ......................................................21BS EN 13577 ......................................................15BS EN 13707 ......................................................38BS EN 13717 ......................................................41BS EN ISO 13769 ................................................17BS EN 13773 ......................................................21BS EN 13799 ......................................................21BS EN 13808 ......................................................22BS EN 13834 ......................................................15BS EN ISO 13936 ................................................41BS EN 13955 ......................................................41BS EN 13996 ......................................................41BS EN 14042 ......................................................35BS EN 14044 ......................................................21

BS 7989 ..............................................................30BS 8207 ..............................................................30BS 8211 ..............................................................30BS 8219 ..............................................................30BS 8414 ..............................................................30BS 8487 ..............................................................12BS 9210 ..............................................................38BS 9210 N007 ....................................................30BS 9210 N0009 ..................................................30BS 9220 N001 ....................................................30BS 9220 N002 ....................................................30BS 9220 N003 ....................................................30BS 9220 N004 ....................................................30BS 25777 ............................................................22BS 594987 .............................................12, 38, 39BIP 2074 .............................................................20BIP 2122 .............................................................20BIP 3016 .............................................................39DD 246 ...............................................................30DD 247 ...............................................................30DD 253 ...............................................................30DD 263 ...............................................................20DD CEN/TS 15590 ..............................................16DD CEN ISO/TS 17845 ........................................35DD CEN ISO/TS 22475 ........................................19DD 7995 .............................................................30BS EN 1 ..............................................................21BS EN ISO 186 ....................................................34BS EN 203 ....................................................12, 39BS EN 228 ..........................................................20BS EN ISO 252 ....................................................14BS EN ISO 283 ....................................................14BS EN 449 ..........................................................34BS EN 481 ....................................................33, 34BS EN 484 ..........................................................34BS EN 498 ..........................................................34BS EN 552 ..........................................................14BS EN 589 ..........................................................20BS EN 590 ..........................................................20BS EN ISO 703 ....................................................14BS EN 730 ..........................................................34BS EN 737 ..........................................................14BS EN 860 ..........................................................14BS EN 993 ....................................................20, 38BS EN 1045 ........................................................34BS EN ISO 1234 ..................................................40BS EN 1326 ........................................................34BS EN 1327 ........................................................34BS EN 1332 ..................................................14, 21BS EN 1402 ..................................................20, 38BS EN 1661 ........................................................40BS EN 1662 ........................................................40BS EN 1663 ........................................................40BS EN 1664 ........................................................40BS EN 1665 ........................................................40BS EN 1666 ........................................................40BS EN 1667 ........................................................41BS EN 1757 ........................................................34BS EN ISO 1924 ..................................................34BS EN 1949 ........................................................34BS EN 1996 ........................................................20BS EN ISO 2338 ..................................................41BS EN ISO 3506 ..................................................41BS EN ISO 3677 ..................................................34BS EN ISO 4119 ..................................................34BS EN ISO 4762 ..................................................41BS EN ISO 4869 ..................................................23BS EN ISO 6504 ............................................14, 39BS EN ISO 6520 ..................................................34BS EN ISO 6579 ..................................................54BS EN ISO 7040 ..................................................41

BS 6183 ..............................................................28BS 6323 ..............................................................39BS 6336 ..............................................................28BS 6364 ..............................................................28BS 6366 ..............................................................28BS 6380 ..............................................................28BS 6396 ..............................................................40BS 6401 ..............................................................28BS 6405 ..............................................................28BS 6407 ..............................................................33BS 6408 ..............................................................38BS 6480 ..............................................................38BS 6499 ..............................................................33BS 6523 ..............................................................40BS 6526 ..............................................................28BS 6652 ..............................................................33BS 6683 ..............................................................28BS 6720 ..............................................................33BS 6724 ..............................................................33BS 6751 ..............................................................29BS 6809 ..............................................................29BS 6837 ..............................................................33BS 6859 ..............................................................29BS 6880 ..............................................................33BS 6883 ..............................................................22BS 6884 ..............................................................33BS 6885 ..............................................................29BS 6898 ..............................................................29BS 6905 ..............................................................29BS 6965 ..............................................................33BS 6979 ..............................................................29BS 6993 ..............................................................29BS 7000 ..............................................................29BS 7028 ..............................................................29BS 7067 ..............................................................29BS 7068 ..............................................................29BS 7116 ..............................................................33BS 7152 ..............................................................38BS 7167 ..............................................................29BS 7184 ..............................................................29BS 7195 ..............................................................33BS 7206 ........................................................14, 39BS 7289 ..............................................................33BS 7371 ..............................................................38BS 7375 ..............................................................29BS 7379 ..............................................................33BS 7386 ..............................................................29BS 7442 ..............................................................33BS 7530 ..............................................................29BS 7535 ..............................................................39BS 7539 ..............................................................33BS 7609 ..............................................................29BS 7611 ..............................................................33BS 7629 ..............................................................34BS 7644 ..............................................................29BS 7654 ..............................................................29BS 7713 ..............................................................34BS 7715 ..............................................................29BS 7724 ..............................................................38BS 7727 ..............................................................29BS 7850 ..............................................................29BS 7870 ..............................................................29BS 7880 ..............................................................30BS 7904 ..............................................................30BS 7917 ..............................................................22BS 7921 ..............................................................34BS 7930 ..............................................................30BS 7955 ..............................................................30BS 7967 ..............................................................12BS 7971 ..............................................................30BS 7987 ..............................................................30

Alpha-numeric sequence of British Standards continued...

10 Update Standards Aug 2007Prices may be subject to change.

Page 6: August 2007

BS ISO/IEC 19794 ...............................................18BS ISO 20752 .....................................................18BS ISO 21015 .....................................................18BS ISO 21389 .....................................................36BS ISO 22972 .....................................................36BS ISO 23309 .....................................................19BS ISO 23470 .....................................................19BS ISO 24343 .....................................................19BS ISO/IEC 25020 ...............................................19BS ISO/IEC 25030 ...............................................19BS ISO 80000 ...............................................19, 40BS IEC 60191 .........................................19, 22, 39BS IEC 60287 ......................................................19BS IEC 61526 ......................................................17DD ISO/TS 15510 ................................................18DD ISO/TS 19139 ................................................18DD ISO/TS 28923 ................................................19DD ISO/TS 28924 ................................................19DD IEC/TS 60479 ................................................21PD CEN/TR 15592 ...............................................19PD 6494 .............................................................30PD 6498 .............................................................30PD 6507 .............................................................30PD 6508 .............................................................30PD 6520 .............................................................30PD 6541 .......................................................19, 40PD 6584 .............................................................30PD 6590 .......................................................19, 40PD 6680 .............................................................30PD 6688 .............................................................21PD 6691 .............................................................19PD ISO/TR 2801 ..................................................19PD ISO/TR 17737 ................................................19PD ISO/IEC TR 24722 ..........................................19PD CLC/TR 50459 ...............................................16PD CLC/TR 50473 .........................................19, 40PD CLC/TR 50479 .........................................19, 40PD CLC/TR 50501 ...............................................16BS 4N 100 ..........................................................22BS MA 5 .............................................................30BS MA 57 ...........................................................30BS OHSAS 18001 ................................................12BS AU 50 ......................................................17, 40BS AU 110 ..........................................................30BS AU 193 ..........................................................30BS AU 237 ..........................................................30BS AU 258 ..........................................................31

BS EN 50173 ......................................................21BS EN 60034 ................................................16, 22BS EN 60269 ................................................12, 16BS EN 60309 ......................................................22BS EN 60335 ....................................21, 22, 39, 40BS EN 60445 ......................................................16BS EN 60679 ......................................................16BS EN 60730 ......................................................22BS EN 60745 ..........................................16, 17, 22BS EN 60947 ......................................................22BS EN 60976 ......................................................54BS EN 61300 ......................................................21BS EN 61526 ................................................17, 21BS EN 61747 ................................................17, 40BS EN 61988 ......................................................17BS EN 62056 ......................................................21BS EN 62282 ......................................................22BS EN 62464 ......................................................17BS EN ISO 80000 ..........................................17, 40DD ENV 12282 ...................................................35DD ENV 13106 ...................................................40DD ENV 13777 ...................................................40DD ENV 13834 ...................................................15BS ISO 31 ...............................................17, 19, 40BS ISO 2230 .......................................................35BS ISO 2328 .......................................................17BS ISO 3045 .......................................................35BS ISO 3053 .......................................................35BS ISO 3063 .......................................................35BS ISO 3739 .................................................17, 40BS ISO 3809 .......................................................35BS ISO 4000 .................................................17, 40BS ISO 4409 .................................................17, 39BS ISO 4718 .......................................................35BS ISO 4724 .......................................................35BS ISO 4725 .......................................................35BS ISO 4730 .......................................................35BS ISO 4733 .......................................................35BS ISO 5130 .......................................................17BS ISO 6452 .......................................................17BS ISO 7004 .......................................................35BS ISO 7589 .......................................................35BS ISO 7634 .......................................................17BS ISO 8085 .......................................................21BS ISO 8995 .......................................................40BS ISO 9236 .......................................................36BS ISO 9727 .................................................17, 18BS ISO 9843 .......................................................36BS ISO 10275 .....................................................18BS ISO 10290 .....................................................42BS ISO 10330 .....................................................36BS ISO 10349 .....................................................36BS ISO 10813 .....................................................21BS ISO 11783 .....................................................18BS ISO 13769 .....................................................17BS ISO 14912 .....................................................21BS ISO 15033 .....................................................18BS ISO 15072 .....................................................21BS ISO/IEC 15417 ...............................................18BS ISO/IEC 15459 ...............................................18BS ISO 15663 .....................................................36BS ISO 15901 .....................................................21BS ISO 16000 .....................................................18BS ISO 16110 .....................................................18BS ISO/IEC 16388 ...............................................18BS ISO 17531 .....................................................36BS ISO/IEC TR 18047 ..........................................21BS ISO 18054 .....................................................36BS ISO 18055 .....................................................36BS ISO 19012 .....................................................18BS ISO 19137 .....................................................18

BS EN 14154 ......................................................22BS EN 14398 ......................................................21BS EN ISO 14453 ................................................35BS EN ISO 14577 ................................................15BS EN 14587 ......................................................15BS EN 14591 ......................................................15BS EN 14704 ......................................................15BS EN 14843 ......................................................15BS EN 14844 ......................................................15BS EN 14878 ......................................................15BS EN 14983 ......................................................15BS EN 14992 ......................................................15BS EN 14994 ......................................................15BS EN ISO 15004 ................................................15BS EN 15050 ......................................................15BS EN 15099 ......................................................15BS EN ISO 15103 ................................................15BS EN 15153 ......................................................15BS EN 15195 ......................................................15BS EN 15200 ......................................................15BS EN 15206 ......................................................16BS EN 15272 ......................................................16BS EN 15304 ......................................................16BS EN 15323 ......................................................16BS EN 15614 ......................................................16BS EN ISO 15975 ................................................41BS EN ISO 15976 ................................................41BS EN ISO 15977 ................................................41BS EN ISO 15978 ................................................41BS EN ISO 15979 ................................................42BS EN ISO 15980 ................................................42BS EN ISO 15981 ................................................42BS EN ISO 15982 ................................................42BS EN ISO 15983 ................................................42BS EN ISO 15984 ................................................42BS EN ISO 16276 ................................................16BS EN ISO 16426 ................................................42BS EN ISO 16582 ................................................42BS EN ISO 16583 ................................................42BS EN ISO 16584 ................................................42BS EN ISO 16585 ................................................42BS EN ISO 17776 ................................................35BS EN ISO 19493 ................................................16BS EN 20187 ......................................................35BS EN ISO 20988 ................................................16BS EN 21974 ......................................................35BS EN 22339 ......................................................42BS EN 22340 ......................................................42BS EN 22341 ......................................................42BS EN 23035 ......................................................35BS EN ISO 23429 ................................................42BS EN 24766 ......................................................42BS EN 25827 ......................................................35BS EN 27434 ......................................................42BS EN 27435 ......................................................42BS EN 27436 ......................................................42BS EN 27931 ......................................................35BS EN 28167 ......................................................35BS EN 28206 ......................................................35BS EN 28430 ......................................................35BS EN 28736 ......................................................42BS EN 28737 ......................................................42BS EN 28738 ......................................................42BS EN 28749 ......................................................42BS EN 29090 ......................................................35BS EN 29313 ......................................................35BS EN 29454 ......................................................35BS EN 29455 ......................................................35BS EN 50083 ......................................................16BS EN 50132 ......................................................39BS EN 50144 ......................................................16

Update Standards Aug 2007 Prices may be subject to change. 11

Alpha-numeric sequence of British Standards continued...

Help Us to Help

You!

Always quote your Customer Number

Don’t know your number?

Contact Customer Services

020 8996 9001

who will be happy to check it for you

Page 7: August 2007

12 Update Standards Aug 2007Prices may be subject to change.12

BRITISH STANDARDS

The following British Standardpublications are available fromBSI Customer Services (see ’How to order’on page 2).

The publications listed below are newand revised British Standards that weremade available last month.

An existing BSI publication bearing anumber identical to one announcedbelow is automatically withdrawn unlessstated otherwise.

In all other cases of supersession, detailsare given and a corresponding entryappears in the ’British Standardswithdrawn’ section.

BRITISH STANDARD IMPLEMENTATIONSWILL BE SUPPLIED IN PREFERENCE TOEUROPEAN OR INTERNATIONALSTANDARDS, UNLESS OTHERWISEREQUESTED.

Please order by the British Standardreference not the ISBN number.

BS 2000 series standards are also availablefrom:–Library of the Energy Institute61 New Cavendish StreetLondon W1G 7ARTel: 020 7467 7100Fax: 020 7255 1472Email: [email protected] this series, member pricing isapplicable to BSI and Energy Institutemembers.

BS 88:—Low-voltage fuses

BS 88-2:2007Supplementary requirements for fuses for useby authorized persons (fuses mainly forindustrial application). Examples ofstandardized systems of fuses A to I

supersedes BS 88-2.2:1988, BS 88-5:1988, BS 88-6:1988 and BS EN 60269-2:1995 which remaincurrentISBN 978 0 580 55506 0£71.00 members, £142.00 non-members

PEL/32

BS 6100-11:2007Performance characteristics, measurement andjoints

supersedes BS 6100-1.5.1:1999, BS 6100-1.5.2:1987, BS 6100-1.5.3:1988, BS 6100-1.7.1:1986 and BS 6100-1.7. 2:1989ISBN 978 0 580 50891 2£51.00 members, £102.00 non-members

B/500/-/1

BS 7967:—Carbon monoxide in dwellings and thecombustion performance of gas-fired appliances

BS 7967-4:2007Guide for using electronic portable combustiongas analysers as part of the process of servicingand maintenance of gas-fired appliances

no current standard is supersededISBN 978 0 580 50852 3£36.00 members, £72.00 non-members

GSE/30/-/21

BS 8487:2007The design and construction of gas boostersused in association with combustion equipment.Specification

no current standard is supersededISBN 978 0 580 56749 0£36.00 members, £72.00 non-members

GSE/33

BS 594987:2007Asphalt for roads and other paved areas.Specification for transport, laying andcompaction and type testing protocols

supersedes BS 4987-2:2003 and BS 594-2:2003ISBN 978 0 580 50778 6£71.00 members, £142.00 non-members

B/510/1

BS OHSAS 18001:2007Occupational health and safety managementsystems. Requirements

supersedes OHSAS 18001:1999ISBN 978 0 580 59404 5£25.00 members, £50.00 non-members

HS/1

BS EN PUBLICATIONS

The following are British Standardimplementations of the English languageversions of European Standards (ENs).

BSI has an obligation to publish all ENsand to withdraw any conflicting BritishStandards. This has led to a series ofstandards, BS ENs, using the EN number.

Note: The date referenced in theidentifier is the date of the Europeanstandard.

BS EN 203:—Gas heated catering equipment

BS EN 203-2-7:2007Specific requirements. Salamanders androtisseries

supersedes BS EN 203-2:1995ISBN 978 0 580 50894 3£29.00 members, £58.00 non-members

GSE/19

BS 88-3:2007Supplementary requirements for fuses for useby unskilled persons (fuses mainly forhousehold or similar applications). Examples ofstandardized systems of fuses A to F

supersedes BS 1361:1971 and BS EN 60269-3:1995which remain currentISBN 978 0 580 55508 4£100.00 members, £200.00 non-members

PEL/32

BS 3936:—Nursery stock

BS 3936-4:2007Specification for forest trees, poplars andwillows

supersedes BS 3936-4:1984 and BS 3936-5:1985ISBN 978 0 580 50853 0£51.00 members, £102.00 non-members

AW/1

BS 5871:—Specification for the installation andmaintenance of gas fires, convector heaters,fire/back boilers and decorative fuel effect gasappliances

BS 5871-4:2007Independent gas-fired flueless fires, convectorheaters and heating stoves of nominal heatinput not exceeding 6 kW (2nd and 3rd familygases)

no current standard is supersededISBN 978 0 580 53949 7£59.00 members, £118.00 non-members

GSE/30

BS 6100:—Building and civil engineering. Vocabulary

BS 6100-2:2007Spaces, building types, environment andphysical planning

supersedes BS 6100-1.1:1987, BS 6100-1.2:1992and BS 6100-1.8:1990ISBN 978 0 580 50573 7£51.00 members, £102.00 non-members

B/500/-/1

BS 6100-8:2007Work with timber and wood-based panels

supersedes BS 6100-4.1:1992, BS 6100-4.2:1984,BS 6100-4.3:1984, BS 6100-4.4:1992 and BS 6100-4.5:1984ISBN 978 0 580 50719 9£51.00 members, £102.00 non-members

B/500/-/1

BS 6100-10:2007Contract terms

supersedes BS 6100-1.5.6:1988 and BS 6100-1.5.7:1988ISBN 978 0 580 50602 4£36.00 members, £72.00 non-members

B/500/-/1

British Standards

Please

do not send

confirmation

of

orders placed by

telephone

as it can lead to

duplication

Page 8: August 2007

BS EN 12413:2007Safety requirements for bonded abrasiveproducts

supersedes BS EN 12413:1999ISBN 978 0 580 56114 6£71.00 members, £142.00 non-members

MTE/13

BS EN 12572:—Artificial climbing structures

BS EN 12572-1:2007Safety requirements and test methods for ACSwith protection points

supersedes BS EN 12572:1999ISBN 978 0 580 55795 8£51.00 members, £102.00 non-members

SW/136

BS EN 12897:2006Water supply. Specification for indirectly heatedunvented (closed) storage water heaters

supersedes BS 7206:1990ISBN 978 0 580 52987 0£51.00 members, £102.00 non-members

B/504

BS EN 13042:—Machines and plants for the manufacture,treatment and processing of hollow glass.Safety requirements

BS EN 13042-1:2007Gob feeder

no current standard is supersededISBN 978 0 580 58153 3£36.00 members, £72.00 non-members

MCE/3/13

BS EN 13042-3:2007IS machines

no current standard is supersededISBN 978 0 580 58154 0£51.00 members, £102.00 non-members

MCE/3/13

BS EN 13084:—Free-standing chimneys

BS EN 13084-2:2007Concrete chimneys

supersedes BS EN 13084-2:2001ISBN 978 0 580 52934 4£51.00 members, £102.00 non-members

B/506/14

BS EN 13433:2007Devices to prevent pollution by backflow ofpotable water. Mechanical disconnector, directactuated. Family G, type A

no current standard is supersededISBN 978 0 580 54010 3£51.00 members, £102.00 non-members

B/504/4

BS EN ISO 7396:—Medical gas pipeline systems

BS EN ISO 7396-1:2007Pipeline systems for compressed medical gasesand vacuum

supersedes BS EN 737-3:2000 which remains currentISBN 978 0 580 53012 8£36.00 members, £72.00 non-members

CH/121/6

BS EN ISO 7823:—Plastics. Poly(methacrylate) sheets. Types,dimensions and characteristics

BS EN ISO 7823-3:2007Continuous cast sheets

supersedes BS EN ISO 7823-3:2004ISBN 978 0 580 56409 3£36.00 members, £72.00 non-members

PRI/76

BS EN ISO 8501:—Preparation of steel substrates beforeapplication of paints and related products.Visual assessment of surface cleanliness

BS EN ISO 8501-4:2006Initial surface conditions, preparation gradesand flash rust grades in connection with high-pressure water jetting

no current standard is supersededISBN 0 580 50148 7£132.00 members, £264.00 non-members

STI/21

BS EN ISO 11137:—Sterilization of health care products. Radiation

BS EN ISO 11137-2:2007Establishing the sterilization dose

supersedes BS EN 552:1994 which remains currentISBN 978 0 580 53286 3£77.00 members, £154.00 non-members

CH/198

BS EN ISO 11161:2007Safety of machinery. Integrated manufacturingsystems. Basic requirements

no current standard is supersededISBN 978 0 580 52925 2£67.00 members, £134.00 non-members

MCE/3

BS EN ISO 11810:—Lasers and laser-related equipment. Testmethod and classification for the laser-resistance of surgical drapes and/or patient-protective covers

BS EN ISO 11810-2:2007Secondary ignition

supersedes BS EN ISO 11810:2002ISBN 978 0 580 53013 5£51.00 members, £102.00 non-members

CPW/172

BS EN ISO 252:2007Conveyor belts. Adhesion between constitutiveelements. Test methods

supersedes BS EN ISO 252-1:1999ISBN 978 0 580 53859 9£36.00 members, £72.00 non-members

PRI/67

BS EN ISO 283:2007Textile conveyor belts. Full thickness tensilestrength, elongation at break and elongation atthe reference load. Test method

supersedes BS EN ISO 283-1:2000ISBN 978 0 580 53766 0£36.00 members, £72.00 non-members

PRI/67

BS EN ISO 703:2007Conveyor belts. Transverse flexibility(troughability). Test method

supersedes BS EN ISO 703-1:2000ISBN 978 0 580 58460 2£29.00 members, £58.00 non-members

PRI/67

BS EN 860:2007Safety of woodworking machines. One sidethickness planing machines

supersedes BS EN 860:1997ISBN 978 0 580 55339 4£67.00 members, £134.00 non-members

MTE/23

BS EN 1332:—Identification card systems. Man-machineinterface

BS EN 1332-4:2007Coding of user requirements for people withspecial needs

supersedes BS EN 1332-4:1999ISBN 978 0 580 56383 6£59.00 members, £118.00 non-members

IST/17

BS EN ISO 6504:—Paints and varnishes. Determination of hidingpower

BS EN ISO 6504-3:2007Determination of contrast ratio of light-coloured paints at a fixed spreading rate

supersedes BS 3900-D11:1998ISBN 978 0 580 54391 3£36.00 members, £72.00 non-members

STI/10

BS EN ISO 7214:2007Cellular plastics. Polyethylene. Methods of test

supersedes BS EN ISO 7214:2002ISBN 978 0 580 55243 4£36.00 members, £72.00 non-members

PRI/24

BS EN Publications continued...

14 Update Standards Aug 2007Prices may be subject to change.

Page 9: August 2007

BS EN 15050:2007Precast concrete products. Bridge elements

no current standard is supersededISBN 978 0 580 54672 3£71.00 members, £142.00 non-members

B/524

BS EN 15099:—Irrigation techniques. Remote monitoring andcontrol for irrigation systems

BS EN 15099-1:2007General considerations

no current standard is supersededISBN 978 0 580 52938 2£36.00 members, £72.00 non-members

AGE/30

BS EN ISO 15103:—Plastics. Poly(phenylene ether) (PPE) mouldingand extrusion materials

BS EN ISO 15103-2:2007Preparation of test specimens anddetermination of properties

supersedes BS EN ISO 15103-2:2004ISBN 978 0 580 57205 0£36.00 members, £72.00 non-members

PRI/82

BS EN 15153:—Railway applications. External visible andaudible warning devices for high speed trains

BS EN 15153-1:2007Head, marker and tail lamps

no current standard is supersededISBN 978 0 580 55156 7£36.00 members, £72.00 non-members

RAE/1/-/7

BS EN 15153-2:2007Warning horns

no current standard is supersededISBN 978 0 580 55157 4£29.00 members, £58.00 non-members

RAE/1/-/7

BS EN 15195:2007Liquid petroleum products. Determination ofignition delay and derived cetane number(DCN) of middle distillate fuels by combustionin a constant volume chamber

no current standard is supersededISBN 978 0 580 53010 4£18.38 members, £24.50 non-members

PTI/13

BS EN 15200:2007Sanitary appliances. Multifunction showercabinets

no current standard is supersededISBN 978 0 580 55314 1£59.00 members, £118.00 non-members

B/503

BS EN 14704:—Determination of the elasticity of fabrics

BS EN 14704-2:2007Multiaxial tests

no current standard is supersededISBN 978 0 580 53449 2£36.00 members, £72.00 non-members

TCI/24

BS EN 14843:2007Precast concrete products. Stairs

no current standard is supersededISBN 978 0 580 52929 0£59.00 members, £118.00 non-members

B/524

BS EN 14844:2006Precast concrete products. Box culverts

no current standard is supersededISBN 978 0 580 52900 9£59.00 members, £118.00 non-members

B/524

BS EN 14878:2007Textiles. Burning behaviour of children’snightwear. Specification

no current standard is supersededISBN 978 0 580 53450 8£36.00 members, £72.00 non-members

TCI/66/-/8

BS EN 14983:2007Explosion prevention and protection inunderground mines. Equipment and protectivesystems for firedamp drainage

no current standard is supersededISBN 978 0 580 54456 9£59.00 members, £118.00 non-members

FSH/23

BS EN 14992:2007Precast concrete products. Wall elements

no current standard is supersededISBN 978 0 580 52952 8£59.00 members, £118.00 non-members

B/524

BS EN 14994:2007Gas explosion venting protective systems

no current standard is supersededISBN 978 0 580 54508 5£51.00 members, £102.00 non-members

FSH/23

BS EN ISO 15004:—Ophthalmic instruments. Fundamentalrequirements and test methods

BS EN ISO 15004-2:2007Light hazard protection

supersedes BS EN ISO 15004:1998ISBN 978 0 580 53959 6£67.00 members, £134.00 non-members

CH/172/6

BS EN 13434:2006Devices to prevent pollution by backflow ofpotable water. Mechanical disconnector,hydraulic actuated. Family G, type B

no current standard is supersededISBN 978 0 580 54009 7£51.00 members, £102.00 non-members

B/504/4

BS EN 13501:—Fire classification of construction products andbuilding elements

BS EN 13501-4:2007Classification using data from fire resistancetests on components of smoke control systems

no current standard is supersededISBN 978 0 580 52989 4£51.00 members, £102.00 non-members

FSH/22

BS EN 13577:2007Chemical attack on concrete. Determination ofaggressive carbon dioxide content in water

no current standard is supersededISBN 978 0 580 57341 5£29.00 members, £58.00 non-members

B/517/1

BS EN 13834:2007Cookware. Ovenware for use in traditionaldomestic ovens

supersedes DD ENV 13834:2000ISBN 978 0 580 55669 2£51.00 members, £102.00 non-members

CW/9

BS EN ISO 14577:—Metallic materials. Instrumented indentationtest for hardness and materials parameters

BS EN ISO 14577-4:2007Test method for metallic and non-metalliccoatings

no current standard is supersededISBN 978 0 580 53802 5£59.00 members, £118.00 non-members

ISE/NFE/4/5

BS EN 14587:—Railway applications. Track. Flash butt weldingof rails

BS EN 14587-1:2007New R220, R260, R260Mn and R350HT graderails in a fixed plant

no current standard is supersededISBN 978 0 580 53694 6£59.00 members, £118.00 non-members

RAE/2/-/1

BS EN 14591:—Explosion prevention and protection inunderground mines. Protective systems

BS EN 14591-2:2007Passive water trough barriers

no current standard is supersededISBN 978 0 580 54379 1£71.00 members, £142.00 non-members

FSH/23

Update Standards Aug 2007 Prices may be subject to change. 15

Page 10: August 2007

BS EN 60034:—Rotating electrical machines

BS EN 60034-28:2007Test methods for determining quantities ofequivalent circuit diagrams for three-phase low-voltage cage induction motors

no current standard is supersededISBN 978 0 580 54224 4£51.00 members, £102.00 non-members

PEL/2

BS EN 60269:—Low-voltage fuses

BS EN 60269-1:2007General requirements

supersedes BS EN 60269-1:1999, BS EN 60269-2:1995 and BS EN 60269-3:1995 which remaincurrentISBN 978 0 580 55505 3£77.00 members, £154.00 non-members

PEL/32

BS EN 60269-4:2007Supplementary requirements for fuse-links forthe protection of semiconductor devices

supersedes BS EN 60269-4:1996 and BS EN 60269-4-1:2002 which remain currentISBN 978 0 580 55507 7£71.00 members, £142.00 non-members

PEL/32

BS EN 60445:2007Basic and safety principles for man-machineinterface, marking and identification.Identification of equipment terminals andconductor terminations

supersedes BS EN 60445:2000 which remainscurrentISBN 978 0 580 50572 0£36.00 members, £72.00 non-members

GEL/16

BS EN 60679:—Quartz crystal controlled oscillators of assessedquality

BS EN 60679-1:2007Generic specification

supersedes BS EN 60679-1:1998ISBN 978 0 580 55252 6£77.00 members, £154.00 non-members

EPL/49

BS EN 60745:—Hand-held motor-operated electric tools. Safety

BS EN 60745-2-3:2007Particular requirements for grinders, polishersand disk-type sanders

supersedes BS EN 50144-2-3:2002 which remainscurrentISBN 978 0 580 54027 1£67.00 members, £134.00 non-members

CPL/61/6

BS EN ISO 16276-2:2007Cross-cut testing and X-cut testing

no current standard is supersededISBN 978 0 580 55742 2£36.00 members, £72.00 non-members

STI/27

BS EN ISO 19493:2007Water quality. Guidance on marine biologicalsurveys of hard-substrate communities

no current standard is supersededISBN 978 0 580 54108 7£51.00 members, £102.00 non-members

EH/3/5

BS EN ISO 20988:2007Air quality. Guidelines for estimatingmeasurement uncertainty

no current standard is supersededISBN 978 0 580 54876 5£77.00 members, £154.00 non-members

EH/2/4

BS EN 50083:—Cable networks for television signals, soundsignals and interactive services

BS EN 50083-2:2006Electromagnetic compatibility for equipment

supersedes BS EN 50083-2:2001 which remainscurrentISBN 978 0 580 55893 1£71.00 members, £142.00 non-members

EPL/100

PD CLC/TR 50459:—Railway applications. Communication, signallingand processing systems. European rail trafficmanagement system. Driver-machine interface

PD CLC/TR 50459-7:2007Specific transmission modules

no current standard is supersededISBN 978 0 580 52933 7£67.00 members, £134.00 non-members

GEL/9/1

PD CLC/TR 50501:—Railway applications. Rolling stock.Intercommunication between vehicles andtrain/wayside

PD CLC/TR 50501-1:2007Data dictionary and rules for functionalstandardisation

no current standard is supersededISBN 978 0 580 52930 6£67.00 members, £134.00 non-members

GEL/9/2

BS EN 15206:2007Vitreous and porcelain enamels. Production ofspecimens for testing enamel on sheet steel,sheet aluminium and cast iron

no current standard is supersededISBN 978 0 580 55230 4£29.00 members, £58.00 non-members

STI/36

BS EN 15272:—Inland navigation vessels. Rope leading

BS EN 15272-2:2007Fairlead

no current standard is supersededISBN 978 0 580 50482 2£36.00 members, £72.00 non-members

SME/32/-/7

BS EN 15304:2007Determination of the freeze-thaw resistance ofautoclaved aerated concrete

no current standard is supersededISBN 978 0 580 54454 5£36.00 members, £72.00 non-members

B/523

BS EN 15323:2007Bitumen and bituminous binders. Acceleratedlong-term ageing/conditioning by the rotatingcylinder method (RCAT)

no current standard is supersededISBN 978 0 580 53011 1£18.38 members, £24.50 non-members

PTI/13

DD CEN/TS 15590:2007Solid recovered fuels. Determination ofpotential rate of microbial self heating usingthe real dynamic respiration index

no current standard is supersededISBN 978 0 580 57654 6£18.00 members, £36.00 non-members

PTI/17

BS EN 15614:2007Protective clothing for firefighters. Laboratorytest methods and performance requirementsfor wildland clothing

no current standard is supersededISBN 978 0 580 57950 9£36.00 members, £72.00 non-members

PH/3/2

BS EN ISO 16276:—Corrosion protection of steel structures byprotective paint systems. Assessment of, andacceptance criteria for, the adhesion/cohesion(fracture strength) of a coating

BS EN ISO 16276-1:2007Pull-off testing

no current standard is supersededISBN 978 0 580 55271 7£36.00 members, £72.00 non-members

STI/27

BS EN Publications continued...

16 Update Standards Aug 2007Prices may be subject to change.

Page 11: August 2007

BS ISO 4409:2007Hydraulic fluid power. Positive-displacementpumps, motors and integral transmissions.Methods of testing and presenting basic steadystate performance

supersedes BS 4617:1983ISBN 978 0 580 54337 1£51.00 members, £102.00 non-members

MCE/18/-/8

BS ISO 5130:2007Acoustics. Measurements of sound pressurelevel emitted by stationary road vehicles

no current standard is supersededISBN 978 0 580 54436 1£158.00 members, £316.00 non-members

EH/1/2

BS ISO 6452:2007Rubber- or plastics-coated fabrics.Determination of fogging characteristics of trimmaterials in the interior of automobiles

no current standard is supersededISBN 978 0 580 57046 9£36.00 members, £72.00 non-members

TCI/69

BS ISO 7634:2007Road vehicles. Compressed air braking systemsfor towed vehicles including those withelectronic braking control functions. Testprocedures

supersedes BS ISO 7634:2003ISBN 978 0 580 59129 7£71.00 members, £142.00 non-members

AUE/11

BS ISO 9727:—Cylindrical cork stoppers. Physical tests

BS ISO 9727-1:2007Determination of dimensions

no current standard is supersededISBN 978 0 580 52946 7£29.00 members, £58.00 non-members

PRI/81

BS ISO 9727-2:2007Determination of mass and apparent density foragglomerated cork stoppers

no current standard is supersededISBN 978 0 580 52945 0£29.00 members, £58.00 non-members

PRI/81

BS ISO 9727-3:2007Determination of humidity content

no current standard is supersededISBN 978 0 580 52944 3£29.00 members, £58.00 non-members

PRI/81

BS ENs IMPLEMENTED BYAMENDMENT

For the standards listed below see alsothe ’Amendments to British Standards’and ’Updated British Standards’ sectionsof this issue of Update Standards.

BS EN ISO 13769:2006Gas cylinders. Stamp marking

PVE/3/7

Implementation of European Standard EN ISO 13769by amendment to BS ISO 13769:2002.

BS IMPLEMENTATIONS

BS Implementations comprise the ISO orIEC text without any national deviationand with front and back cover indicatingthe UK committee responsible.No other information will normally beadded.

Note: The date referenced in theidentifier is the date of the internationalstandard.

BS ISO 2328:2007Fork-lift trucks. Hook-on type fork arms andfork arm carriages. Mounting dimensions

supersedes BS ISO 2328:1993ISBN 978 0 580 56170 2£29.00 members, £58.00 non-members

MHE/7

BS ISO 3739:—Industrial tyres and rims

BS ISO 3739-1:2007Pneumatic tyres (metric series) on 5° tapered onflat base rims. Designation, dimensions andmarking

supersedes BS AU 50-1.5.2:1994ISBN 978 0 580 54533 7£36.00 members, £72.00 non-members

AUE/4

BS ISO 4000:—Passenger car tyres and rims

BS ISO 4000-1:2007Tyres (metric series)

supersedes BS AU 50-1.1.1c:2001ISBN 978 0 580 59237 9£59.00 members, £118.00 non-members

AUE/4

BS ISO 4000-2:2007Rims

supersedes BS AU 50-4.1.1a:2001ISBN 978 0 580 59236 2£36.00 members, £72.00 non-members

AUE/4

BS EN 60745-2-5:2007Particular requirements for circular saws

supersedes BS EN 60745-2-5:2003 which remainscurrentISBN 978 0 580 50838 7£71.00 members, £142.00 non-members

CPL/61/6

BS EN 61526:2007Radiation protection instrumentation.Measurement of personal dose equivalentsHp(10) and Hp(0,07) for X, gamma, neutron andbeta radiations. Direct reading personal doseequivalent meters and monitors

supersedes BS IEC 61526:1998ISBN 978 0 580 50455 6£71.00 members, £142.00 non-members

NCE/2

BS EN 61747:—Liquid crystal display devices

BS EN 61747-3-1:2006Liquid crystal display (LCD) cells. Blank detailspecification

supersedes BS EN 61747-3-1:2000ISBN 978 0 580 55193 2£29.00 members, £58.00 non-members

EPL/47

BS EN 61988:—Plasma display panels

BS EN 61988-4:2007Climatic and mechanical testing methods

no current standard is supersededISBN 978 0 580 53396 9£51.00 members, £102.00 non-members

EPL/47

BS EN 62464:—Magnetic resonance equipment for medicalimaging

BS EN 62464-1:2007Determination of essential image qualityparameters

no current standard is supersededISBN 978 0 580 53390 7£77.00 members, £154.00 non-members

CH/62/2

BS EN ISO 80000:—Quantities and units

BS EN ISO 80000-8:2007Acoustics

supersedes BS ISO 31-7:1992ISBN 978 0 580 54868 0£51.00 members, £102.00 non-members

EH/1

Update Standards Aug 2007 Prices may be subject to change. 17

Page 12: August 2007

BS ISO 19012:—Optics and photonics. Designation ofmicroscope objectives

BS ISO 19012-1:2007Flatness of field/plan

no current standard is supersededISBN 978 0 580 52949 8£29.00 members, £58.00 non-members

CPW/172/5

BS ISO 19137:2007Geographic information. Core profile of thespatial schema

no current standard is supersededISBN 978 0 580 52966 5£36.00 members, £72.00 non-members

IST/36

DD ISO/TS 19139:2007Geographic information. Metadata. XMLschema implementation

no current standard is supersededISBN 978 0 580 52965 8£71.00 members, £142.00 non-members

IST/36

BS ISO/IEC 19794:—Information technology. Biometric datainterchange formats

BS ISO/IEC 19794-7:2007Signature/sign time series data

no current standard is supersededISBN 978 0 580 54242 8£51.00 members, £102.00 non-members

IST/44

BS ISO/IEC 19794-10:2007Hand geometry silhouette data

no current standard is supersededISBN 978 0 580 55166 6£51.00 members, £102.00 non-members

IST/44

BS ISO 20752:2007Cork stoppers. Determination of releasable 2, 4,6 trichloroanisol (TCA)

no current standard is supersededISBN 978 0 580 56172 6£36.00 members, £72.00 non-members

PRI/81

BS ISO 21015:2007Office furniture. Office work chairs. Testmethods for the determination of stability,strength and durability

no current standard is supersededISBN 978 0 580 55249 6£59.00 members, £118.00 non-members

FW/0

BS ISO/IEC 15417:2007Information technology. Automaticidentification and data capture techniques.Code 128 bar code symbology specification

supersedes BS ISO/IEC 15417:2000ISBN 978 0 580 56258 7£59.00 members, £118.00 non-members

IST/34

BS ISO/IEC 15459:—Information technology. Unique identifiers

BS ISO/IEC 15459-5:2007Unique identifier for returnable transport items(RTIs)

no current standard is supersededISBN 978 0 580 56255 6£29.00 members, £58.00 non-members

IST/34

BS ISO/IEC 15459-6:2007Unique identifier for product groupings

no current standard is supersededISBN 978 0 580 57172 5£36.00 members, £72.00 non-members

IST/34

DD ISO/TS 15510:2003Stainless steels. Chemical composition

no current standard is supersededISBN 978 0 580 52963 4£18.00 members, £36.00 non-members

ISE/30

BS ISO 16000:—Indoor air

BS ISO 16000-8:2007Determination of local mean ages of air inbuildings for characterizing ventilationconditions

no current standard is supersededISBN 978 0 580 54791 1£67.00 members, £134.00 non-members

EH/2/3

BS ISO 16110:—Hydrogen generators using fuel processingtechnologies

BS ISO 16110-1:2007Safety

no current standard is supersededISBN 978 0 580 52901 6£77.00 members, £154.00 non-members

PVE/3/7

BS ISO/IEC 16388:2007Information technology. Automaticidentification and data capture techniques.Code 39 bar code symbology specification

supersedes BS ISO/IEC 16388:1999ISBN 978 0 580 56257 0£51.00 members, £102.00 non-members

IST/34

BS ISO 9727-4:2007Determination of dimensional recovery aftercompression

no current standard is supersededISBN 978 0 580 52943 6£29.00 members, £58.00 non-members

PRI/81

BS ISO 9727-5:2007Determination of extraction force

no current standard is supersededISBN 978 0 580 52942 9£29.00 members, £58.00 non-members

PRI/81

BS ISO 9727-6:2007Determination of liquid tightness

no current standard is supersededISBN 978 0 580 52941 2£29.00 members, £58.00 non-members

PRI/81

BS ISO 9727-7:2007Determination of dust content

no current standard is supersededISBN 978 0 580 52940 5£29.00 members, £58.00 non-members

PRI/81

BS ISO 10275:2007Metallic materials. Sheet and strip.Determination of tensile strain hardeningexponent

no current standard is supersededISBN 978 0 580 54404 0£36.00 members, £72.00 non-members

ISE/NFE/4/1

BS ISO 11783:—Tractors and machinery for agriculture andforestry. Serial control and communicationsdata network

BS ISO 11783-1:2007General standard for mobile datacommunication

no current standard is supersededISBN 978 0 580 55628 9£81.00 members, £162.00 non-members

AGE/6/1

BS ISO 11783-13:2007File server

no current standard is supersededISBN 978 0 580 55629 6£67.00 members, £134.00 non-members

AGE/6/1

BS ISO 15033:2007Plastics. Determination of caprolactam and itscyclic and linear oligomers by HPLC

supersedes BS ISO 15033:2000ISBN 978 0 580 53017 3£36.00 members, £72.00 non-members

PRI/21

BS Implementations continued...

18 Update Standards Aug 2007Prices may be subject to change.

Page 13: August 2007

PUBLISHED DOCUMENTS

PD ISO/TR 17737:2007Workplace air. Guidelines for selectinganalytical methods for sampling and analyzingisocyanates in air

no current standard is supersededISBN 978 0 580 55194 9£36.00 members, £72.00 non-members

EH/2/2

PD CLC/TR 50473:2007Recommendations for dimensional co-ordination between enclosures and built-indevices for rail fixing for household and similarinstallations

supersedes PD 6590:1996ISBN 978 0 580 52988 7£29.00 members, £58.00 non-members

PEL/23/1

PD CEN/TR 15592:2007Health services. Quality management systems.Guide for the use of EN ISO 9004:2000 in healthservices for performance improvement

no current standard is supersededISBN 978 0 580 57980 6£77.00 members, £154.00 non-members

CH/100

PD 6691:2007Guidance on the use of BS EN 13108 Bituminousmixtures. Material specifications

no current standard is supersededISBN 978 0 580 50777 9£77.00 members, £154.00 non-members

B/510/1

PD ISO/TR 2801:2007Clothing for protection against heat and flame.General recommendations for selection, careand use of protective clothing

no current standard is supersededISBN 978 0 580 55177 2£51.00 members, £102.00 non-members

PH/3/2

PD CLC/TR 50479:2007Electrical installation guide. Selection anderection of electrical equipment. Wiringsystems. Limitation of temperature rise ofconnecting interfaces

supersedes PD 6541:1995ISBN 978 0 580 58735 1£29.00 members, £58.00 non-members

JPEL/64

DD ISO/TS 28923:2007Agricultural machinery. Guards for moving partsof power transmission. Guard opening with tool

no current standard is supersededISBN 978 0 580 53015 9£14.00 members, £28.00 non-members

AGE/6

DD ISO/TS 28924:2007Agricultural machinery. Guards for moving partsof power transmission. Guard opening withouttool

no current standard is supersededISBN 978 0 580 53014 2£14.00 members, £28.00 non-members

AGE/6

BS ISO 80000:—Quantities and units

BS ISO 80000-4:2006Mechanics

supersedes BS ISO 31-3:1992ISBN 978 0 580 53353 2£59.00 members, £118.00 non-members

SS/7

BS ISO 80000-5:2007Thermodynamics

supersedes BS ISO 31-4:1992ISBN 978 0 580 54865 9£51.00 members, £102.00 non-members

SS/7

BS IEC 60191:—Mechanical standardization of semiconductordevices

BS IEC 60191-1:2007General rules for the preparation of outlinedrawings of discrete devices

supersedes BS 3934-1:1992ISBN 978 0 580 50842 4£59.00 members, £118.00 non-members

EPL/47

BS IEC 60287:—Electric cables. Calculation of the current rating

BS IEC 60287-3-3:2007Sections on operating conditions. Cablescrossing external heat sources

no current standard is supersededISBN 978 0 580 55214 4£36.00 members, £72.00 non-members

GEL/20/16

DD CEN ISO/TS 22475:—Geotechnical investigation and testing.Sampling methods and groundwatermeasurements

DD CEN ISO/TS 22475-2:2006Qualification criteria for enterprises andpersonnel

no current standard is supersededISBN 978 0 580 52921 4£18.00 members, £36.00 non-members

B/526/3

BS ISO 23309:2007Hydraulic fluid power systems. Assembledsystems. Methods of cleaning lines by flushing

no current standard is supersededISBN 978 0 580 53009 8£29.00 members, £58.00 non-members

MCE/18/-/6

BS ISO 23470:2007Soil quality. Determination of effective cationexchange capacity (CEC) and exchangeablecations using a hexamminecobalt trichloridesolution

no current standard is supersededISBN 978 0 580 53016 6£51.00 members, £102.00 non-members

EH/4

BS ISO 24343:—Resilient and laminate floor coverings.Determination of indentation and residualindentation

BS ISO 24343-1:2007Residual indentation

no current standard is supersededISBN 978 0 580 53540 6£29.00 members, £58.00 non-members

PRI/60

PD ISO/IEC TR 24722:2007Information technology. Biometrics. Multi-modal and other multibiometric fusion

no current standard is supersededISBN 978 0 580 55168 0£59.00 members, £118.00 non-members

IST/44

BS ISO/IEC 25020:2007Software engineering. Software product qualityrequirements and evaluation (SQuaRE).Measurement reference model and guide

no current standard is supersededISBN 978 0 580 54052 3£51.00 members, £102.00 non-members

IST/15

BS ISO/IEC 25030:2007Software engineering. Software product qualityrequirements and evaluation (SQuaRE). Qualityrequirements

no current standard is supersededISBN 978 0 580 59324 6£67.00 members, £134.00 non-members

IST/15

Update Standards Aug 2007 Prices may be subject to change. 19

e-mail

your order

[email protected]

Page 14: August 2007

BS EN 10305:—Steel tubes for precision applications. Technicaldelivery conditions

BS EN 10305-1:2002Seamless cold drawn tubes

CORRIGENDUM 2 AMD 17112

ISE/8

Also incorporates Corrigendum 1.

BS EN 10305-2:2002Welded cold drawn tubes

CORRIGENDUM 2 AMD 17111

ISE/8

Also incorporates Corrigendum 1.

BS EN 10305-3:2002Welded cold sized tubes

CORRIGENDUM 2 AMD 17110

ISE/8

Also incorporates Corrigendum 1.

BS EN 10305-4:2003Seamless cold drawn tubes for hydraulic andpneumatic power systems

CORRIGENDUM 1 AMD 17109

ISE/8

BS EN ISO 11810:—Lasers and laser-related equipment. Testmethod and classification for the laserresistance of surgical drapes and/or patientprotective covers

BS EN ISO 11810-1:2005Primary ignition and penetration

CORRIGENDUM 1 AMD 17236

CPW/172

BS EN 12766:—Petroleum products and used oils.Determination of PCBs and related products

BS EN 12766-3:2004(BS 2000-462.3:2004)Determination and quantification ofpolychlorinated terphenyls (PCT) andpolychlorinated benzyl toluenes (PCBT) contentby gas chromatography (GC) using an electroncapture detector (ECD)

CORRIGENDUM 1 AMD 17068

PTI/13

BS EN 13480:—Metallic industrial piping

BS EN 13480-3:2002Design and calculation

CORRIGENDUM 1 AMD 16362

PVE/10

Also incorporates Amendment 1.

BS 6140:—Test equipment for generating vibration

BS 6140-2:1982Methods of describing characteristics ofauxiliary tables for test equipment forgenerating vibration

CORRIGENDUM 1 AMD 17141

GME/21

BS EN 228:2004Automotive fuels. Unleaded petrol.Requirements and test methods

CORRIGENDUM 1 AMD 17166

PTI/2

BS EN 589:2004Automotive fuels. LPG. Requirements and testmethods

CORRIGENDUM 2 AMD 17167

PTI/15

Also incorporates Corrigendum 1.

BS EN 590:2004Automotive fuels. Diesel. Requirements and testmethods

CORRIGENDUM 1 AMD 17164

PTI/2

BS EN 993:—Methods of test for dense shaped refractoryproducts

BS EN 993-19:2004Determination of thermal expansion by adifferential method

CORRIGENDUM 1 AMD 17138

RPI/1

BS EN 1402:—Unshaped refractory products

BS EN 1402-5:2003Preparation and treatment of test pieces

CORRIGENDUM 1 AMD 17176

RPI/1

BS EN 1402-6:2003Measurement of physical properties

CORRIGENDUM 1 AMD 17175

RPI/1

BS EN 1996:—National Annex to Eurocode 6. Design ofmasonry structures

BS EN 1996-2:2006Design considerations, selection of materialsand execution of masonry

CORRIGENDUM 1 AMD 17207

B/525/6

DRAFTS FOR DEVELOPMENT

DD 263:2007Intruder and hold-up alarm systems.Commissioning, maintenance and remotesupport. Code of practice

no current standard is supersededISBN 978 0 580 55787 3£29.00 members, £58.00 non-members

GW/1/2

SPECIALIST BOOKS FROMBSI

BIP 2074:2007Electrical plugs and wiring and world electricitysupplies. 2nd edition

supersedes BIP 2074:2005ISBN 0 580 50495 2£170.00 members, £170.00 non-members

BIP 2122:2007BS 8555 Project Acorn Workbook. Volume 1 –stages 1-3

no current standard is supersededISBN 0 580 50225 5£50.00 members, £50.00 non-members

AMENDMENTS TO BRITISHSTANDARDS

Most amendments are not issuedseparately. Those that make significantchanges to a standard are incorporatedinto the standard which is re-issued as anew edition (see ’Updated BritishStandards’). Amendments which makesmaller changes or corrections areavailable on request, free of charge topast purchasers of the standard. Allamendments to date of despatch areincluded within any main publicationwhen ordered for the first time.

The following amendments to BritishStandards were made available lastmonth.

(Please order by the reference AMD ...)

BS 2000:—Methods of test for petroleum and its products

BS 2000-462.3:—Petroleum products and used oils.Determination of PCBs and related products.Determination and quantification ofpolychlorinated terphenyls (PCT) andpolychlorinated benzyl toluenes (PCBT) contentby gas chromatography (GC) using an electroncapture decector (ECD)See BS EN 12766-3.

Drafts for Development

20 Update Standards Aug 2007Prices may be subject to change.

Page 15: August 2007

BS ISO 15901:—Pore size distribution and porosity of solidmaterials by mercury porosimetry and gasadsorption

BS ISO 15901-1:2005Mercury porosimetry

CORRIGENDUM 1 AMD 17162

LBI/37

BS ISO/IEC TR 18047:—Information technology. Radio frequencyidentification device conformance test methods

BS ISO/IEC TR 18047-3:2004Test methods for air interface communicationsat 13,56 MHz

CORRIGENDUM 1 AMD 17158

IST/34

DD IEC/TS 60479:—Effects of current on human beings andlivestock

DD IEC/TS 60479-1:2005General aspects

CORRIGENDUM 1 AMD 17146

JPEL/64

PD 6688-1-2:2007Background paper to the UK National Annex toBS EN 1991-1-2

CORRIGENDUM 1 AMD 17225

B/525/1

UPDATED BRITISHSTANDARDS

The following standards have beenamended and the amendments havebeen incorporated into an updatedstandard.

NOTE: Updated British Standardsmust be reordered as theamendments are not availableseparately.

BS EN 1:1998Flued oil stoves with vaporizing burners

AMENDMENT 1£59.00 members, £118.00 non-members

RHE/13

BS EN 1332:—Identification card systems. Man-machineinterface

BS EN 1332-1:1999Design principles for the user interface

AMENDMENT 1£51.00 members, £102.00 non-members

IST/17

BS EN 13525:2005Forestry machinery. Wood chippers. Safety

AMENDMENT 1£59.00 members, £118.00 non-members

AGE/29

BS EN 60335-2-35:2002Particular requirements for instantaneous waterheaters

CORRIGENDUM 2 AMD 17147

CPL/61/07

Also incorporates Corrigendum 1 and Amendment 1.

BS EN 61300:—Fibre optic interconnecting devices and passivecomponents. Basic test and measurementprocedures

BS EN 61300-3-29:2006Examinations and measurements. Measurementtechniques for characterizing the amplitude ofthe spectral transfer function of DWDMcomponents

CORRIGENDUM 1 AMD 17178

GEL/86/2

BS EN 61526:2007Radiation protection instrumentation.Measurement of personal dose equivalentsHp(10) and Hp(0,07) for X, gamma, neutron andbeta radiations. Direct reading personal doseequivalent meters and monitors

CORRIGENDUM 1 AMD 17102

NCE/2

BS EN 62056:—Electricity metering. Data exchange for meterreading, tariff and load control

BS EN 62056-46:2002Data link layer using HDLC protocol

CORRIGENDUM 1 AMD 17133

PEL/13

BS ISO 8085:—Polyethylene fittings for use with polyethylenepipes for the supply of gaseous fuels. Metricseries. Specifications

BS ISO 8085-3:2001Electrofusion fittings

CORRIGENDUM 1 AMD 17149

PRI/88

BS ISO 10813:—Vibration generating machines. Guidance forselection

BS ISO 10813-1:2004Equipment for environmental testing

CORRIGENDUM 1 AMD 17142

GME/21/2

BS ISO 14912:2003Gas analysis. Conversion of gas mixturecomposition data

CORRIGENDUM 1 AMD 17150

PTI/15

BS ISO 15072:1999Hexagon bolts with flange with metric finepitch thread. Small series. Product grade A

CORRIGENDUM 1 AMD 17151

FME/9/3

BS EN 13501:—Fire classification of construction products andbuilding elements

BS EN 13501-5:2005Classification using data from external fireexposure to roofs tests

CORRIGENDUM 1 AMD 17165

FSH/22/8

BS EN 13508:—Conditions of drain and sewer systems outsidebuildings

BS EN 13508-2:2003Visual inspection coding system

CORRIGENDUM 1 AMD 17163

B/505

BS EN 13773:2003Textiles and textile products. Burning behaviour.Curtains and drapes. Classification scheme

AMENDMENT 1 AMD 17156

TCI/66/-/8

BS EN 13799:2002Contents gauges for LPG tanks

CORRIGENDUM 1 AMD 17143

PVE/19

BS EN 14044:2005High rise aerial appliances for fire service use.Turntable ladders with sequential movements.Safety and performance requirements and testmethods

CORRIGENDUM 1 AMD 17177

FSH/17/3

BS EN 14398:—Cryogenic vessels. Large transportable non-vacuum insulated vessels

BS EN 14398-2:2003Design, fabrication, inspection and testing

AMENDMENT 1 AMD 17144

PVE/18

Also incorporates Corrigendum 1.

BS EN 50173:—Information technology. Generic cablingsystems

BS EN 50173-1:2002General requirements and office areas

CORRIGENDUM 2 AMD 17194

TCT/7

Also incorporates Corrigendum 1.

BS EN 60335:—Household and similar electrical appliances.Safety

BS EN 60335-2-11:2003Particular requirements for tumble dryers

CORRIGENDUM 4 AMD 17139

CPL/61/14

Also incorporates Corrigendum 1, 2 & 3 andAmendments 1 & 2.

Update Standards Aug 2007 Prices may be subject to change. 21

Page 16: August 2007

BS 4N 100:—Design and installation

BS 4N 100-1:1999Aircraft oxygen systems and equipment

AMENDMENT 2£29.00 members, £58.00 non-members

ACE/38

Also incorporates Amendment 1.

SPECIAL ANNOUNCEMENTS

Comments can be sent by email or bypost to named contacts at:–BSI Head Office389 Chiswick High RoadLondon W4 4ALTel: 020 8996 9000

BS 6883:1999Elastomer insulated cables for fixed wiring inships and on mobile and fixed offshore units.Requirements and test methods

BS 7917:1999Elastomer insulated fire resistant (limited circuitintegrity) cables for fixed wiring in ships and onmobile and fixed offshore units. Requirementsand test methods

In advance of a fuller review of the abovestandards for updating and amendment, and toalign the requirement for colour identification,when needed, with that accepted in the UK andEurope for non-marine applications (seeBS 7671:2001; Amendment 2:2004), GEL/20/6 hasagreed the following clarification andinterpretation in respect of the identification ofthe cores of cables by colour.Contact: Asghar AshrafiEmail: [email protected]

GEL/20/6

BS 25777ICT continuity

BSI will commence work soon on the aboveBritish Standard and expects that it will bepublished by July 2008.

Certain areas specified in PAS 77 will form partof the scope of BS 25777 but these will bemodified in accordance with the overallvocabulary and plain English approach ofBS 25999 and with applicability to all sizes oforganization.

As part of the development process, BSI makesevery effort to include interested stakeholders,including consumer organizations, professionalinstitutions, certification, testing and inspectionbodies; educational establishments; andenforcement bodies and governmentdepartments. If you would be interested inhelping please contact the ProgrammeManager (below) by 20 August, 2007.Contact: David AdamsonEmail: [email protected]

BCM/1

BS EN 60730:—Automatic electrical controls for household andsimilar use

BS EN 60730-2-3:1992Particular requirements for automatic electricalwater level sensing controls of the float orelectrode-sensor type used in boiler applications

AMENDMENT 3£36.00 members, £72.00 non-members

CPL/72

Also incorporates Amendments 1 & 2.

BS EN 60730-2-15:1996Particular requirements for automatic electricalwater level sensing controls of the float orelectrode-sensor type used in boiler applications

AMENDMENT 2£36.00 members, £72.00 non-members

CPL/72

Also incorporates Amendment 1 and Corrigendum 1.

BS EN 60730-2-16:1998Particular requirements for automatic electricalwater level controls of the float type forhousehold and similar applications

AMENDMENT 2£36.00 members, £72.00 non-members

CPL/72

Also incorporates Amendment 1 and Corrigendum 1 & 2.

BS EN 60745:—Hand-held motor-operated electric tools. Safety

BS EN 60745-2-6:2003Particular requirements for hammers

AMENDMENT 2£51.00 members, £102.00 non-members

CPL/61/6

Also incorporates Amendment 1.

BS EN 60947:—Low-voltage switchgear and controlgear

BS EN 60947-6-2:2003Multiple function equipment. Control andprotective switching devices (or equipment)(CPS)

AMENDMENT 1£88.00 members, £176.00 non-members

PEL/17/2

BS EN 62282:—Fuel cell technologies

BS EN 62282-2:2004Fuel cell modules

AMENDMENT 1£59.00 members, £118.00 non-members

GEL/105

BS IEC 60191:—Mechanical standardization of semiconductordevices

BS IEC 60191-2:1966Dimensions

AMENDMENT 5£163.00 members, £326.00 non-members

EPL/47

Also incorporates Amendments 1, 2, 3 & 4.

BS EN 13808:2005Bitumen and bituminous binders. Frameworkfor specifying cationic bituminous emulsions

AMENDMENT 1£59.00 members, £118.00 non-members

B/510/19

BS EN 14154:—Water meters

BS EN 14154-1:2005General requirements

AMENDMENT 1£51.00 members, £102.00 non-members

CPI/30/7

BS EN 14154-2:2005Installation and conditions of use

AMENDMENT 1£51.00 members, £102.00 non-members

CPI/30/7

BS EN 14154-3:2005Test methods and equipment

AMENDMENT 1£77.00 members, £154.00 non-members

CPI/30/7

BS EN 60034:—Rotating electrical machines

BS EN 60034-9:2005Noise limits

AMENDMENT 1£36.00 members, £72.00 non-members

PEL/2

BS EN 60309:—Plugs, socket-outlets and couplers for industrialpurposes

BS EN 60309-1:1999General requirements

AMENDMENT 2£77.00 members, £154.00 non-members

PEL/23/4

Also incorporates Amendment 1.

BS EN 60309-2:1999Dimensional interchangeability requirementsfor pin and contact-tube accessories

AMENDMENT 2£77.00 members, £154.00 non-members

PEL/23/4

Also incorporates Amendment 1.

BS EN 60335:—Household and similar electrical appliances.Safety

BS EN 60335-2-24:2003Particular requirements for refrigeratingappliances, ice-cream appliances and ice-makers

AMENDMENT 2£71.00 members, £142.00 non-members

CPL/61/3

Also incorporates Amendment 1.

Updated British Standards continued...

22 Update Standards Aug 2007Prices may be subject to change.

Page 17: August 2007

prEN 13803:—Railway applications. Track. Track alignmentdesign parameters. Track gauges 1435 mm andwider

prEN 13803-1Plain line

This is a second CEN Enquiry for prEN 13803-1,with a short period given for consultation. Ifyou wish to obtain the second enquirydocument it is available from the ProgrammeManager (below).

Comments should be provided before 31 July, 2007 in order to meet theCEN deadline. It is realized that thisannouncement will not be read until after thedeadline for comments. However, commentscan still be sent to the BSI contact after the 31 July, 2007.Contact: Bernard WilliamsEmail: [email protected]

RAE/2/-/3

BRITISH STANDARDSPROPOSED FORCONFIRMATION

It is BSI policy for every standard to bereviewed by the technical committeeresponsible not more than five years afterpublication, to establish whether it is stillcurrent and, if it is not, to identify and setin hand appropriate action.

Circumstances may lead to an earlierreview.

Confirmation indicates the continuingcurrency of a standard.

A note of any objections to the proposalsbelow should be sent to Debbie Stead,Head of Committee Service Centre –Operations, BSI Head Office, 389 ChiswickHigh Road, London W4 4AL or via emailto [email protected] 30 September, 2007.

BS 10:1962Specification for flanges and bolting for pipes,valves, and fittings

PSE/15

BS 88:—Cartridge fuses for voltages up to and including1000 V A.C. and 1500 V D.C.

BS 88-5:1988Specification of supplementary requirementsfor fuse-links for use in A.C. electricity supplynetworks

PEL/32

BS 88-6:1988Specification of supplementary requirementsfor fuses of compact dimensions for use in240/415 V A.C. industrial and commercialelectrical installations

PEL/32

BS EN ISO 4869:—Acoustics. Hearing protectors

BS EN ISO 4869-2:1995/Corrigendum 1Estimation of effective A-weighted soundpressure levels when hearing protectors areworn

Please note that the text of BS EN ISO 4869-2:1995/AC:2007 is identical to that of ISO 4869-2:1994/Corrigendum 1:2006.Contact: Charlotte ArmstrongEmail: [email protected]

EH/1

BS EN 12464:—Lighting of work places

BS EN 12464-2Outdoor work places

The long awaited standard for the lighting ofoutdoor work places was available from theend of July.Contact: Margaret RyanEmail: [email protected]

CPL/34/10

CEN CONSULTANTS

Recruitment for CEN Consultants in thefields of:

* Machinery safety & Lifts (Directives 98/37/EC,2006/42/EC and 95/16/EC).

In anticipation of a contract between CEN andEC/EFTA for consultant services for the period2008-01-01 to 2008-12-31, CEN ManagementCentre is launching a call for candidates in theabove field.

The successful candidate will spend most ofhis/her time on work relating to the MachineryDirectives (98/37/EC and 2006/42/EC). However,specific knowledge and experience of the LiftsDirective (95/16/EC) is essential in order to dealwith the standards developed in this field.

Further information is available from theaddress below:

https://www.cen.eu/cenorm/consultants2.pdf

Applications in electronic file format should be submitted to [email protected] by 24 August, 2007.Contact: Ian GreensmithEmail: [email protected]

BS 341:—Transportable gas container valves

BS 341-3:2002Valve outlet connections

PVE/3/1

BS 426:1969Specification for fixed centres for use onmachine tools and in other applications

MTE/1

BS 476:—Fire tests on building materials and structures

BS 476-4:1970Non-combustibility test for materials

FSH/21

BS 476-11:1982Method for assessing the heat emission frombuilding materials

FSH/21

BS 476-12:1991Method of test for ignitability of products bydirect flame impingement

FSH/21

BS 476-32:1989Guide to full scale fire tests within buildings

FSH/21

BS 593:1989Specification for laboratory thermometers

LBI/36

BS 615:1953Specification for Kohlrausch flasks

LBI/36

BS 658:1989Specification for apparatus for thedetermination of distillation range (includingflasks and receivers)

LBI/36

BS 675:1953Specification for sugar flasks

LBI/36

BS 676:1982Specification for flasks with graduated necks(phenols type)

LBI/36

BS 692:1990Specification for meteorological thermometers

LBI/36

BS 701:1953Specification for brewers’ mash flask

LBI/36

Update Standards Aug 2007 Prices may be subject to change. 23

e-mail

your order

[email protected]

Page 18: August 2007

BS 1583:1986Specification for one-mark pipettes

LBI/36

BS 1660:—Machine tapers

BS 1660-11:1991Specification for gauges

MTE/1

BS 1694:1990Specification for hospital ward cots for children

CH/101

BS 1722:—Fences

BS 1722-4:1986Specification for cleft chestnut pale fences

B/201

BS 1765:—Hospital bedside lockers

BS 1765-1:1990Specification for general purpose bedsidelockers for patients

CH/101

BS 1895:1973Specification for metal-framed wheeled screensfor use in hospitals

CH/101

BS 1900:1976Specification for secondary referencethermometers

LBI/36

BS 1935:1972Specification for spindle noses and adjustableadaptors for multi-spindle heads

MTE/1

BS 1936:—Undercuts and runouts for screw threads

BS 1936-1:1952Inch screw threads

FME/9

BS 1979:1985Specification for hospital ward bedsteads forpsychiatric hospitals

CH/101

BS 1983:—Chucks for machine tools and portable powertools

BS 1983-3:1987Specification for dimensions of collet pads forbase jaws of power operated workholdingchucks

MTE/1

BS 1016-108.6:1992Determination of critical air blast value

PTI/15

BS 1041:—Code for temperature measurement

BS 1041-2.1:1985Expansion thermometers. Guide to selectionand use of liquid-in-glass thermometers

LBI/36

BS 1089:1973Specification for workhead spindle noses forgrinding machines: cylindrical external, internaland universal types

MTE/1

BS 1306:1975Specification for copper and copper alloypressure piping systems

PVE/10

BS 1362:1973Specification for general purpose fuse links fordomestic and similar purposes (primarily for usein plugs)

PEL/32

BS 1365:1990Specification for short-range short-stemthermometers

LBI/36

BS 1413:1989Specification for page size for books

PAI/43

BS 1428:—Microchemical analysis. Apparatus for thedetermination of elements by other thancombustion methods

BS 1428-B2:1960Specification for ammonia distillation apparatus(Markham)

LBI/36

BS 1428-D5:1955Specification for syringe pattern micro-pipette

LBI/36

BS 1494:—Specification for fixing accessories for buildingpurposes

BS 1494-1:1964Fixings for sheet, roof and wall coverings

B/542/4

BS 1580:Parts 1 and 2:1962Specification for unified screw threads

FME/9

BS 714:1950Specification. Cartridge fuse-links for use inrailway-signalling circuits

PEL/32

BS 718:1991Specification for density hydrometers

LBI/36

BS 733:—Pyknometers

BS 733-2:1987Methods for calibration and use ofpyknometers

LBI/36

BS 753:1987Schedule for density-composition tables foraqueous solutions of sulphuric acid

LBI/36

BS 756:1952Specification for Dean and Stark apparatus

LBI/36

BS 791:1990Specification for solid-stem calorimeterthermometers

LBI/36

BS 975:1987Schedule for density-composition tables foraqueous solutions of nitric acid

LBI/36

BS 976:1987Schedule for density-composition tables foraqueous solutions of hydrochloric acid

LBI/36

BS 1016:—Methods for analysis and testing of coal andcoke

BS 1016-10:1977Arsenic in coal and coke

PTI/15

BS 1016-107.3:1990Caking and swelling properties of coal.Determination of swelling properties using adilatometer

PTI/15

BS 1016-108:—Tests special to coke

BS 1016-108.2:1992Determination of Micum and Irsid indices

PTI/15

British Standards Proposed for Confirmation continued...

24 Update Standards Aug 2007Prices may be subject to change.

Page 19: August 2007

BS 3403:1972Specification for indicating tachometer andspeedometer systems for industrial, railway andmarine use

MCE/14

BS 3407:1982Guide for assessing coke screening plant

PTI/15

BS 3423:1986Recommendations for design of glass vacuumvessels (including desiccators) for laboratory use

LBI/36

BS 3475:1976Specification for bowl stands for use inhospitals

CH/101

BS 3492:1987Specification for road and rail tanker hoses andhose assemblies for petroleum products,including aviation fuels

PRI/66

BS 3529:1962Specification for dimensions of flywheelhousing mounting pads and brackets for i.c.engines

MCE/14

BS 3533:1981Glossary of thermal insulation terms

B/540

BS 3537:1979Specification for gudgeon pins up to 200 mmdiameter

MCE/14

BS 3551:1962Specification for alloy steel shackles

MHE/1

BS 3553:1992Specification for graphical symbols for coalpreparation plant flowsheets

PTI/15

BS 3567:1985Code of practice for preparation of flowsheetsfor the design of coal preparation plant

PTI/15

BS 3572:1986Specification for access fittings for chimneysand other high structures in concrete or brickwork

B/514/39

BS 3619:1976Specification. Mobile infusion stands

CH/101

BS 2838:—Examination and general treatment couches

BS 2838-1:1988Specification for fixed height couches

CH/101

BS 2838-2:1991Specification for variable height couches

CH/101

BS 2842:1992Specification for whirling hygrometer

LBI/36

BS 2891:1992Specification for operating table mattresses andmattress sections

CH/101

BS 2893:1989Specification for chemical preparations forportable and transportable chemical closets(excluding those for use in aircrafts)

CH/216

BS 2950:1958Specification. Cartridge fuse-links fortelecommunication and light electricalapparatus

PEL/32

BS 3036:1958Specification. Semi-enclosed electric fuses(ratings up to 100 amperes and 240 volts toearth)

PEL/32

BS 3092:1973Specification for main friction clutches, mainpower-take-off assemblies and associatedattachments for internal combustion engines

MCE/14

BS 3110:1959Methods for measuring the rub resistance ofprint

PAI/43

BS 3170:1972Specification for flexible couplings for powertransmission

MCE/2

BS 3202:—Laboratory furniture and fittings

BS 3202-1:1991Introduction

LBI/18

BS 3314:1982Specification for protective aprons for wet work

PH/3

BS 1983-4:1987Specification of criteria to be stated affectingperformance of power operated workholdingchucks at speed

MTE/1

BS 1983-5:1989Code of practice for the safe operation ofworkholding chucks used on lathes

MTE/1

BS 2059/1:1957Summary sheet: straight sided splines. Bottomfitting. Shallow

MCE/2

BS 2059/2:1957Summary sheet: straight sided splines. Bottomfitting. Deep

MCE/2

BS 2059/3:1957Summary sheet: straight sided serrations.Internal and external

MCE/2

BS 2059:1953Specification for straight-sided splines andserrations

MCE/2

BS 2069:1954Specification for gas sampling tubes

LBI/36

BS 2071:1989Specification for soxhlet extractors

LBI/36

BS 2099:1989Specification for castors for hospital equipment

CH/101

BS 2483:1977Specification for overbed tables

CH/101

BS 2485:1987Specification for tee slots, tee bolts, tee nutsand tenons

MTE/1

BS 2692:—Fuses for voltages exceeding 1000 V A.C.

BS 2692-2:1956Expulsion fuses

PEL/32

BS 2718:1979Specification for gas cylinder trolleys

CH/101

Update Standards Aug 2007 Prices may be subject to change. 25

Page 20: August 2007

BS 4185-11:1983Recommendations for accuracy grades of gears

MTE/1

BS 4185-13:1985Specification for dimensions of counterboredholes

MTE/1

BS 4185-14:1987Method for determination of the pilot diameterof 60° centre holes

MTE/1

BS 4190:2001ISO metric black hexagon bolts, screws andnuts. Specification

FME/9/3

BS 4235:—Specification for metric keys and keyways

BS 4235-1:1972Parallel and taper keys

MCE/2

BS 4250:1997Specification for commercial butane andcommercial propane

PTI/15

BS 4262:1984Method of specifying the technical quality ofcoke for use in blast furnaces

PTI/15

BS 4268:1967Specification for the marking of woodenhatchway covers

SME/32/7

BS 4277:1968Glossary of terms used in offset lithographicprinting

PAI/43

BS 4278:1984Specification for eyebolts for lifting purposes

MHE/1

BS 4322:1968Recommendations for buffering on hospitalvehicles such as trolleys

CH/101

BS 4363:1998Specification for distribution assemblies forreduced low voltage electricity supplies forconstruction and building sites

PEL/17/3

BS 4429:1987Specification for rigging screws and turnbucklesfor general engineering, lifting purposes andpipe hanger applications

MHE/1

BS 3958-4:1982Bonded preformed man-made mineral fibrepipe sections

B/540

BS 3958-5:1986Specification for bonded man-made mineralfibre slabs

B/540

BS 3958-6:1972Finishing materials; hard setting composition,self-setting cement and gypsum plaster

B/540

BS 4040:2001Specification for leaded petrol (gasoline) formotor vehicles

PTI/2

BS 4068:1977Specification for hospital trolleys forinstruments, dressings and for anaesthetists’ useincluding angular trolleys

CH/101

BS 4074:2000Specification for steel trench struts

B/514/21

BS 4092:—Specification for domestic front entrance gates

BS 4092-1:1996Specification for metal gates

B/201

BS 4110:1999Specification for visors for vehicle users

PH/2/5

BS 4185:—Machine tool components

BS 4185-1:1967Locknuts (’C’ type, socket set screw locking)

MTE/1

BS 4185-2:1967Collars

MTE/1

BS 4185-7:1973Wide range collets

MTE/1

BS 4185-9:1976Levelling screws, nuts and seating plates

MTE/1

BS 4185-10:1977Trapezoidal threads for lead and feed screwassemblies

MTE/1

BS 3622:1975Specification for general purpose stools andanaesthetists’ chairs for hospital use

CH/101

BS 3641:—Symbols for machine tools

BS 3641-1:1971General symbols

MTE/1

BS 3641-3:1973Additional general symbols

MTE/1

BS 3649:1963Recommendations for original printing plates

PAI/43

BS 3678:1986Specification for access hooks for chimneys andother high structures in steel

B/514/39

BS 3692:2001ISO metric precision hexagon bolts, screws andnuts. Specification

FME/9/3

BS 3800:—General tests for machine tools

BS 3800-3:1990Method of testing performance of machinesoperating under loaded conditions in respect ofthermal distortion

MTE/1

BS 3884:—Modular units for machine tools

BS 3884-1:1974Specification for basic units

MTE/1

BS 3958:—Thermal insulating materials

BS 3958-1:1982Magnesia preformed insulation

B/540

BS 3958-2:1982Calcium silicate preformed insulation

B/540

BS 3958-3:1985Metal mesh faced man-made mineral fibremattresses

B/540

British Standards Proposed for Confirmation continued...

26 Update Standards Aug 2007Prices may be subject to change.

Page 21: August 2007

BS 4845-2:1979Sampling of solid smokeless fuels other thancoke

PTI/15

BS 4886:1988Specification for hospital bedsteads

CH/101

BS 4904:1978Specification for external cladding colours forbuilding purposes

B/542

BS 5045:—Transportable gas containers

BS 5045-7:2000Specification for seamless steel gas containersof water capacity 0.5 L up to 15 L for specialportable applications

PVE/3/3

BS 5045-8:2000Specification for seamless aluminium alloy gascontainers of water capacity 0.5 L up to 15 Land up to 300 bar charged pressure at 15°C forspecial portable application

PVE/3/3

BS 5074:1974Specification for short and long solid-stemthermometers for precision use

LBI/36

BS 5122:1986Specification for rubber hoses for low-pressureand medium-pressure saturated steam

PRI/66

BS 5138:1974Specification for magnetic particle flawinspection of finished machined solid forgedand drop stamped crankshafts

MCE/14

BS 5173:—Method of test for rubber and plastics hosesand hose assemblies

BS 5173-100:1992General introduction

PRI/66

BS 5173-102:—Hydraulic pressure tests

BS 5173-102.3:1988Determination of volumetric expansion of fuel-dispensing pump hoses

PRI/66

BS 5173-102.4:1990Determination of volumetric expansion ofhydraulic hoses

PRI/66

BS 4656-11:1974Drilling machines, vertical floor mountedcolumn and pillar types

MTE/1

BS 4656-12:1979Dividing heads

MTE/1

BS 4656-15:1976Drilling machines, turret and single spindle co-ordinate types

MTE/1

BS 4656-18:1981Specification for broaching machines,horizontal internal type

MTE/1

BS 4656-25:1980Gear planing machines

MTE/1

BS 4656-26:1980Gear shaping machines

MTE/1

BS 4656-28:1988Specification for numerically controlled turningmachines up to and including 1500 mm turningdiameter

MTE/1

BS 4656-29:1981Specification for automatic lathes, multi-spindle(indexing drum) type

MTE/1

BS 4656-38:1995Specification for surface finish of test pieces

MTE/1

BS 4778:—Quality vocabulary

BS 4778-2:1991Quality concepts and related definitions

QS/1

BS 4823:1972Guide to the selection of fitment bores forcylindrical shaft ends

MCE/2

BS 4845:—Methods for sampling manufactured domesticsolid smokeless fuels in small consignments ofmass 50 kg to 5000 kg either in bulk or in bags

BS 4845-1:1972Sampling of coke

PTI/15

BS 4442:—Specification for lathe spindle noses andfaceplates

BS 4442-1:1969Types ’A’ and ’Camlock’

MTE/1

BS 4506:1970Specification for shaft ends

MCE/2

BS 4508:—Thermally insulated underground pipelines

BS 4508-1:1986Specification for steel cased systems with airgap

B/540

BS 4508-4:1977Specific testing and inspection requirements forcased systems without air gap

B/540

BS 4581:—Flanges for mounting grinding wheels ongrinding machine tools

BS 4581-2:1984Specification for dimensions and materials of flanges for grinding wheels of less than 76.2 mm bore

MTE/1

BS 4656:—Accuracy of machine tools and methods of test

BS 4656-1:1981Specification for lathes, general purpose type

MTE/1

BS 4656-2:1988Specification for copying lathes and copyingattachments

MTE/1

BS 4656-3:1971Milling machines, knee and column type,horizontal or vertical spindle plain

MTE/1

BS 4656-4:1971Milling machines, bed type, horizontal orvertical spindle

MTE/1

BS 4656-5:1979Milling machines, knee and column type,horizontal spindle, universal

MTE/1

BS 4656-10:1975Drilling machines, radial type

MTE/1

Update Standards Aug 2007 Prices may be subject to change. 27

Page 22: August 2007

BS 6143-2:1990Prevention, appraisal and failure model

QS/1

BS 6183:—Protective equipment for cricketers

BS 6183-1:2000General requirements

PH/3/9

BS 6183-2:2000Genital protectors

PH/3/9

BS 6183-3:2000Leg protectors for batsmen, wicket-keepers andfielders, and thigh, arm and chest protectors forbatsmen

PH/3/9

BS 6183-4:2001Gloves for batsmen

PH/3/9

BS 6336:1998Guide to the development of fire tests, thepresentation of test data and the role of testsin hazard assessment

FSH/22

BS 6364:1984Specification for valves for cryogenic service

PSE/7

BS 6366:1983Specification for studs for rugby football boots

PH/3/9

BS 6380:1997Guide to low temperature properties and coldweather use of diesel fuels and gas oilsconforming to BS EN 590 and classes A2 and Dof BS 2869

PTI/2

BS 6401:1983Method for measurement, in the laboratory, ofthe specific optical density of smoke generatedby materials

FSH/21

BS 6405:1984Specification for non-calibrated short link steelchain (grade 30) for general engineeringpurposes: class 1 and 2

MHE/1

BS 6526:1998Domestic oven gloves. Requirements and testmethods

PH/3/8

BS 6683:1985Guide to installation and use of valves

PSE/7

BS 5760-2:1994Guide to the assessment of reliability

DS/1

BS 5803:—Thermal insulation for use in pitched roofspaces in dwellings

BS 5803-5:1985Specification for installation of man-mademineral fibre and cellulose fibre insulation

B/540

BS 5842:1980Specification for thermoplastic hose assembliesfor dock, road and tanker use

PRI/66

BS 5853:1980Specification for medicine trolleys

CH/101

BS 5998:1983Specification for quality levels for steel valvecastings

PSE/7

BS 6079:—Project management

BS 6079-1:2002Guide to project management

MS/2

BS 6101:—Machine tool ball screws

BS 6101-1:1981Methods of calculating dynamic and static loadand life ratings

MTE/1

BS 6101-2:1991Specification for accuracy, including geometricaltests

MTE/1

BS 6127:—Petrographic analysis of bituminous coal andanthracite

BS 6127-2:1982Method of preparing coal samples forpetrographic analysis

PTI/15

BS 6143:—Guide to the economics of quality

BS 6143-1:1992Process cost model

QS/1

BS 5186:1975Specification for shaft centre heights

MCE/2

BS 5208:1975Specification for dimensions of power take-offdriving shafts and mounting faces for smallinternal combustion engines

MCE/14

BS 5244:1986Recommendations for application, storage andlife expiry of hydraulic rubber hoses and hoseassemblies

PRI/66

BS 5326:1976Specification. Internal broaching tools and pullchuck locations

MTE/1

BS 5342:1985Specification for rubber hoses for high-pressuresaturated steam

PRI/66

BS 5409:—Specification for nylon tubing

BS 5409-1:1976Fully plasticized nylon tubing types 11 and 12for use primarily in pneumatic installations

PRI/66

BS 5470:1977Specification for glass alcohol hydrometers notincorporating a thermometer

LBI/36

BS 5471:1977Specification for thermometer for use withalcohol hydrometers

LBI/36

BS 5564:1978Specification for high-voltage fuses for theexternal protection of shunt power capacitors

PEL/32

BS 5615:1985Specification for insulating jackets for domestichot water storage cylinders

B/540

BS 5739:1979Method of presentation of lubricationinstructions for machine tools

MTE/1

BS 5760:—Reliability of systems, equipment andcomponents

BS 5760-0:1986Introductory guide to reliability

DS/1

British Standards Proposed for Confirmation continued...

28 Update Standards Aug 2007Prices may be subject to change.

Page 23: August 2007

BS 7715:1994Specification for prevailing torque type bolts,screws and studs with non-metallic prevailingtorque elements incorporated into the thread

FME/9

BS 7727:1994Code of practice for installation and inspectionof pre-insulated compression terminals andconnectors for cables with copper conductorsup to 6 mm2

GEL/20/11

BS 7850:—Total quality management

BS 7850-1:1992Guide to management principles

QS/1

BS 7870:—LV and MV polymeric insulated cables for use bydistribution and generation utilities

BS 7870-3:—Specification for distribution cables of ratedvoltage 0.6/1 kV

BS 7870-3.10:2001PVC insulated combined neutral and earthcopper wire concentric cables with copper oraluminium conductors

GEL/20/16

BS 7870-3.11:2001XLPE insulated combined neutral and earthcopper wire concentric cables with copper oraluminium conductors

GEL/20/16

BS 7870-3.12:2001XLPE insulated combined neutral and earthcopper wire concentric cables with copper oraluminium conductors, having low emission ofsmoke and corrosive gases when affected byfire

GEL/20/16

BS 7870-3.20:2001PVC insulated split concentric cables withcopper or aluminium conductors

GEL/20/16

BS 7870-3.21:2001XLPE insulated split concentric cables withcopper or aluminium conductors

GEL/20/16

BS 7870-3.40:2001XLPE insulated, copper wire waveformconcentric cables with solid aluminiumconductors

GEL/20/16

BS 7067:1990Guide to determination and presentation offloat and sink characteristics of raw coal and ofproducts from coal preparation plants

PTI/15

BS 7068:1989Specification for alternating pressure airmattresses

CH/101

BS 7167:1990Specification for Bordeaux connections

MHE/1

BS 7184:2001Selection, use and maintenance of chemicalprotective clothing. Guidance

PH/3/3

BS 7375:1996Code of practice for distribution of electricityon construction and building sites

PEL/17/3

BS 7386:1997Specification for draughtstrips for the draughtcontrol of existing doors and windows inhousing (including test methods)

B/540/2

BS 7530:—Methods for froth flotation testing of hard coal

BS 7530-1:1992Laboratory procedure

PTI/15

BS 7530-2:1995Evaluation of flotation characteristics

PTI/15

BS 7609:1992Code of practice for installation and inspectionof uninsulated compression and mechanicalconnectors for power cables with copper oraluminium conductors

GEL/20/11

BS 7644:—Direct tension indicators

BS 7644-1:1993Specification for compressible washers

FME/9

BS 7654:1997Specification for single phase street lightingfuses (cut-outs) for low-voltage public electricitydistribution systems. 25 A rating for highwaypower supplies and street furniture

PEL/17/2

BS 6751:1986Guide for protection of machine tools intendedfor use in extreme environmental conditions

MTE/1

BS 6809:1987Method for calibration of radiometers for usein fire testing

FSH/22

BS 6859:—Operating tables

BS 6859-1:1987Specification for mobile general operatingtables

CH/101

BS 6859-2:1987Specification for fixed-pedestal generaloperating tables

CH/101

BS 6885:1988Specification for miniature cartridge fuse linksfor use on printed wiring boards

PEL/32

BS 6898:1987Specification for glass centrifuge tubes forgeneral laboratory use

LBI/36

BS 6905:1987Method for estimation of concentration ofdisinfectants used in ’dirty’ conditions inhospitals by the modified Kelsey-Sykes test

CH/216

BS 6979:1989Method for measurement of static deflection ofpower presses

MTE/1

BS 6993:—Thermal and radiometric properties of glazing

BS 6993-2:1990Method for direct measurement of U-value(thermal transmittance)

B/540

BS 7000:—Design management systems

BS 7000-5:2001Guide to managing obsolescence

OS/1

BS 7028:1999Eye protection for industrial and other uses.Guidance on selection, use and maintenance

PH/2

Update Standards Aug 2007 Prices may be subject to change. 29

Page 24: August 2007

DD 7995:2003Specification for temporary access platforms.Performance and design requirements, and testmethods

B/514/42

PD 6494:1980Mismatch of screw thread systems

FME/9

PD 6498:1981Detail drawings for fire propagation apparatusspecified in BS 476:Part 6:1981

FSH/21

PD 6507:1982Guidance on metric screw threads and fastenersfor use by model engineers

FME/9

PD 6508:1985Detail drawings for the apparatus specified inBS 476:Part 11:1982

FSH/21

PD 6520:1988Guide to fire test methods for buildingmaterials and elements of construction

FSH/21

PD 6584:1995Model for a supplier quality assuranceassessment questionnaire

QS/1

PD 6680:2002Guidance on the new European Standards forthermal insulation materials

B/540

BS MA 5:1970Specification for brass service nameplates forvalves

SME/32

BS MA 57:1975Specification for ships’ deck machinery – ropestorage reels

SME/32

BS AU 110a:1995Specification for rubber hoses and hoseassemblies for automotive air pressure brakingsystems

PRI/66

BS AU 193a:1990Specification for replacement motor cycle andmoped exhaust systems

AUE/9

BS AU 237a:1993Specification for light domestic duty jumperlead sets for automotive starting

AUE/9

BS 8219:2001Installation of sheet roof and wall coverings.Profiled fibre cement. Code of practice

B/542/4

BS 8414:—Fire performance of external cladding systems

BS 8414-1:2002Test methods for non-loadbearing externalcladding systems applied to the face of abuilding

FSH/21

BS 9210 N007-2:1976Detail specification for radio frequencyconnectors (type SMB). Unsealed, soldered,captive contact, 50 ohms, snap-on couplings.Control drawings. Mating face details andgauge information

EPL/46/2

BS 9210 N0009-2:1978Detail specification for radio frequencyconnectors (series SMC). Unsealed, soldered,captive contact, 50 ohms, screw coupling.Control drawings. Mating face details andgauge information. Control drawings. Matingface details and gauge information

EPL/46/2

BS 9220 N001:1971Detail specification for ordinary rectangular(2:1) rigid waveguide tubing. Standard wallthickness. General application category

EPL/46

BS 9220 N002:1971Detail specification for medium flat rectangular(4:1) rigid waveguide tubing. Standard wallthickness. General application category

EPL/46

BS 9220 N003:1971Detail specification for flat rectangular (8.33:1)rigid waveguide tubing. Standard wallthickness. General application category

EPL/46

BS 9220 N004:1971Detail specification for circular rigid waveguidetubing. Standard wall thickness. Generalapplication category

EPL/46

DD 246:1999Recommendations for the use of the conecalorimeter

FSH/21

DD 247:1998Documentation. Vocabulary

TS/1

DD 253:2001Mouthguards for use in sport and recreation.Requirements and test methods

PH/3/9

BS 7880:1997Code of practice for draught control of existingdoors and windows in housing usingdraughtstrips

B/540/2

BS 7904:1998Guide to smoke measurement units. Their basisand use in smoke opacity test methods

FSH/21

BS 7930:—Specification for eye-protectors for racket sports

BS 7930-1:1998Squash

PH/2/9

BS 7955:1999Containment nets and sheets on constructionworks. Specification for performance and testmethods

B/514/27

BS 7971:—Protective clothing and equipment for use inviolent situations and in training

BS 7971-1:2002General requirements

PH/3/12

BS 7971-3:2002Personal defence shields. Requirements and testmethods

PH/3/12

BS 7971-4:2002Limb protectors. Requirements and testmethods

PH/3/12

BS 7987:2001Road traffic signal systems

EPL/526

BS 7989:2001Specification for recirculatory filtration fumecupboards

LBI/18

BS 8207:1985Code of practice for energy efficiency inbuildings

B/540

BS 8211:—Energy efficiency in housing

BS 8211-1:1988Code of practice for energy efficientrefurbishment of housing

B/540

British Standards Proposed for Confirmation continued...

30 Update Standards Aug 2007Prices may be subject to change.

Page 25: August 2007

BS 2003:1974Specification for mild steel drums (light duty:removable heads)

PKW/0

BS 2548:1986Specification for wood wool for generalpackaging purposes

PKW/0

BS 2618:1975Specification for electric traction equipment

GEL/9

BS 2830:1994Specification for suspended access equipment(suspended chairs, traditional steeplejack’sseats, work cages, cradles and platforms) foruse in the building, engineering construction,steeplejack and cleaning industries

B/514

BS 2837:1988Specification for steel links and strap assembliesfor lifting attachments for packing cases

PKW/0

BS 3130:—Glossary of packaging terms

BS 3130-4:1976Metal containers and aerosols

PKW/0

BS 3130-5:1994Plastics and flexible packaging (excludingpaper)

PKW/0

BS 3130-6:1981Wooden packaging

PKW/0

BS 3313:—Specification for aluminium capping foil andstrip for dairy product containers

BS 3313-1:1968Aluminium capping foil for glass containers

PKW/0

BS 3900:—Methods of test for paints. Tests involvingchemical examination of liquid paints and driedpaint films

BS 3900-B4:1986Determination of total lead in paints andsimilar materials

STI/10

BS 3900-B5:1986Preparation of acid extracts from liquid paintsor coating powders

STI/10

BS 1133-19:1986Use of desiccants in packaging

PKW/0

BS 1133-21:1991Regenerated cellulose film, films made ofplastics, aluminium foil, flexible multilayerstructures and metallized materials

PKW/0

BS 1133-22:1989Packaging in plastics containers

PKW/0

BS 1139:—Metal scaffolding

BS 1139-2.2:1991Couplers. Specification for steel and aluminiumcouplers, fittings and accessories for use intubular scaffolding

B/514

BS 1384:—Photographic density measurements

BS 1384-1:1985Guide for terms, symbols and notations

CPW/42

BS 1679:—Containers for pharmaceutical dispensing

BS 1679-5:1973Eye dropper bottles

PKW/0

BS 1679-6:1994Specification for glass medicine bottles

PKW/0

BS 1679-7:1968Ribbed oval glass bottles

PKW/0

BS 1679-8:1992Specification for glass and plastics containersfor solid dosage forms, semi-solids and powders

PKW/0

BS 1683:1987Specification for coated aluminium foil forwrapping processed cheese

PKW/0

BS 1702:1950Specification for mild steel drums (heavy duty –fixed ends)

PKW/0

BS 1722:—Fences

BS 1722-16:1992Specification for organic powder coatings to beused as a plastics finish to components andmesh

B/201

BS AU 258:1995Specification for elasticated straps

AUE/9

CP 143:—Code of practice for sheet roof and wallcoverings

CP 143-5:1964Zinc

B/542/5

CP 143-10:1973Galvanized corrugated steel. Metric units

B/542/5

CP 143-12:1970Copper. Metric units

B/542/5

CP 143-15:1973Aluminium. Metric units

B/542/5

BRITISH STANDARDSREVIEWED ANDCONFIRMED

It is BSI policy for every standard to bereviewed by the technical committeeresponsible not more than five years afterpublication, to establish whether it is stillcurrent and, if it is not, to identify and setin hand appropriate action.

Confirmation indicates the continuingcurrency of a standard.

Where any standard in this list has beenamended since publication, confirmationincludes all amendments published todate. Reference to a particularamendment indicates that it is publishedconcurrently with the confirmation.

BS 1133:—Packaging code

BS 1133-7.6:1988Paper and board wrappers, bags andcontainers. Moulded pulp packaging

PKW/0

BS 1133-8:1991Wooden boxes, cases and crates

PKW/0

BS 1133-10.1:1990Tins and cans

PKW/0

BS 1133-15:1991Tensional strapping

PKW/0

Update Standards Aug 2007 Prices may be subject to change. 31

Page 26: August 2007

BS 4602:1977Specification for the use of metric units inspecifications for glass containers and finishes

PKW/0

BS 4651:—Ammonia solution

BS 4651-0:1987Methods for sampling

CII/37

BS 4651-1:1988Method for determination of density at 20°C

CII/37

BS 4651-4:1988Method for determination of residue afterheating at 850°C

CII/37

BS 4651-5:1988Method for determination of iron content

CII/37

BS 4651-6:1988Methods for determination of chloride content

CII/37

BS 4651-7:1988Method for determination of carbon dioxidecontent

CII/37

BS 5192:—Guide to production control

BS 5192-1:1993Introduction

MS/3

BS 5192-2:1993Production programming

MS/3

BS 5192-3:1993Ordering methods

MS/3

BS 5192-4:1993Dispatching (shop-floor control)

MS/3

BS 5192-5:1993The relationship between production controland other management functions

MS/3

BS 5192-6:1993Computer aided production control

MS/3

BS 4258-9:1989Determination of chloride content

CII/37

BS 4258-13:1990Determination of soluble sulphate content(potentiometric method)

CII/37

BS 4267:—Ammonium nitrate

BS 4267-0:1987General introduction

CII/37

BS 4267-1:1988Method for determination of ammoniacalnitrogen content

CII/37

BS 4267-2:1988Method for determination of total nitrogencontent

CII/37

BS 4267-4:1987Method for determination of sulphated ash

CII/37

BS 4267-6:1987Method for determination of water content

CII/37

BS 4267-7:1987Methods for determination of nitrite content

CII/37

BS 4267-8:1987Methods for determination of chloride content

CII/37

BS 4267-9:1987Method for determination of sulphate content

CII/37

BS 4267-10:1994Method for determination of matter soluble indiethyl ether

CII/37

BS 4267-11:1994Method for determination of inorganic matterand grit insoluble in water

CII/37

BS 4367:1968Methods of test for nitric acid

CII/37

BS 4431:1989Methods of sampling and test for liquefiedanhydrous ammonia

CII/37

BS 3900-B6:1986Determination of ’soluble’ lead content

STI/10

BS 3900-B7:1986Determination of ’soluble’ antimony content

STI/10

BS 3900-B8:1986Determination of ’soluble’ barium content

STI/10

BS 3900-B9:1986Determination of ’soluble’ cadmium content

STI/10

BS 3900-B10:1986Determination of hexavalent chromium contentof solid matter

STI/10

BS 3900-B11:1986Determination of total chromium content ofliquid matter

STI/10

BS 3900-B12:1986Determination of ’soluble’ mercury content

STI/10

BS 3900-B16:1990Determination of total mercury

STI/10

BS 3903:1977Methods of test for sulphuric acid, oleum andliquid sulphur trioxide

CII/37

BS 4258:—Methods of test for phosphoric acid(orthophosphoric acid) for industrial use

BS 4258-2:1989Determination of iron content

CII/37

BS 4258-3:1989Determination of sulphate content

CII/37

BS 4258-4:1975Determination of fluorine content

CII/37

BS 4258-5:1989Determination of silica content

CII/37

BS 4258-7:1978Determination of total phosphorus (V) oxidecontent: quinoline phosphomolybdategravimetric method

CII/37

British Standards Reviewed and Confirmed continued...

32 Update Standards Aug 2007Prices may be subject to change.

Page 27: August 2007

BS 6884:1987Recommendations for plan dimensions of unitloads

PKW/0

BS 6965:—Creasing properties of carton board

BS 6965-1:1988Method for determination of crease recovery(spring back) of 90° fold

PKW/0

BS 7116:1990Specification for double sided pressure sensitiveadhesive tapes

PKW/0

BS 7195:1989Guide for prevention of corrosion of metalscaused by vapours from organic materials

PKW/0

BS 7289:1990Specification for dimensions of three-piecetinplate aerosol cans

PKW/0

BS 7379:1991Specification for plastics/metal laminatecollapsible tubes

PKW/0

BS 7442:—Rubber or plastics covered rollers

BS 7442-1:1991Glossary of terms

PRI/73

BS 7442-2:1991Recommendations for technical information tobe provided by the purchaser

PRI/73

BS 7442-4.3:1993Specification for dimensional tolerances.Requirements

PRI/73

BS 7539:1992Methods for test for determination ofproperties of cushioning materials for packagedesign purposes

PKW/0

BS 7611:1992Specification for potato storage boxes formechanical handling

PKW/0

BS 6069:—Characterization of air quality

BS 6069-3.5:—Workplace atmospheres. Size fractiondefinitions for measurement of airborneparticlesSee BS EN 481.

BS 6407:—Cage pallets for retail use

BS 6407-1:1983Specification for collapsible cage pallets ratedat 300 kg

PKW/0

BS 6407-2:1984Guide to the safe handling and use ofcollapsible cage pallets rated at 300 kg

PKW/0

BS 6499:1998Metal screw necks, screw caps and inner sealsfor metal containers. Specification

PKW/0

BS 6652:1985Specification for packagings resistant toopening by children

PKW/0

BS 6720:1986Specification for marking transit information onpackages for distribution

PKW/0

BS 6724:1997Electric cables. Thermosetting insulated,armoured cables for voltages of 600/1000 V and1900/3300 V, having low emission of smoke andcorrosive gases when affected by fire

GEL/20/17

BS 6837:1987Specification for plan dimensions of rigidrectangular transport packages with a modularrelationship to 1200 mm x 1000 mm and 1200 mm x 800 mm pallets and unit loads

PKW/0

BS 6880:—Code of practice for low temperature hot waterheating systems of output greater than 45 kW

BS 6880-1:1988Fundamental and design considerations

RHE/2

BS 6880-2:1988Selection of equipment

RHE/2

BS 6880-3:1988Installation, commissioning and maintenance

RHE/2

BS 5250:2002Code of practice for control of condensation inbuildings

B/540/2

BS 5422:2001Method for specifying thermal insulatingmaterials for pipes, tanks, vessels, ductwork andequipment operating within the temperaturerange -40°C to +700°C

B/540/7

BS 5427:—Code of practice for the use of profiled sheetfor roof and wall cladding on buildings

BS 5427-1:1996Design

B/542/6

BS 5551:—Fertilizers

BS 5551-4.2.2:1987Chemical analysis. Determination ofphosphorus. Extraction of phosphates soluble inmineral acids

CII/37

BS 5609:1986Specification for printed pressure-sensitive,adhesive-coated labels for marine use, includingrequirements for label base material

PKW/0

BS 5740:1989Specification for oblong flat-top cans for liquidproducts

PKW/0

BS 5892:—Railway rolling stock material (metric)

BS 5892-5:1987Specification for steel bars for retaining ringsfor tyred wheels

RAE/3/-/1

BS 5925:1991Code of practice for ventilation principles anddesigning for natural ventilation

B/540

BS 5970:2001Code of practice for thermal insulation ofpipework and equipment in the temperaturerange of -100°C to +870°C

B/540/7

BS 5974:1990Code of practice for temporarily installedsuspended scaffolds and access equipment

B/514

BS 5975:1996Code of practice for falsework

B/514

Update Standards Aug 2007 Prices may be subject to change. 33

Page 28: August 2007

BS EN ISO 8205-2:2002Dimensions and requirements for single-conductor connection cables

WEE/29

BS EN ISO 9312:1995Resistance welding equipment. Insulated pinsfor use in electrode back-ups

WEE/29

BS EN ISO 9455:—Soft soldering fluxes. Test methods

BS EN ISO 9455-3:1995Determination of acid value, potentiometricand visual titration methods

NFE/27

BS EN ISO 9455-6:1997Determination and detection of halide(excluding fluoride) content

NFE/27/4

BS EN ISO 9455-12:1994Steel tube corrosion test

NFE/27

BS EN 10067:1997Hot rolled bulb flats. Dimensions and toleranceson shape, dimensions and mass

ISE/13

BS EN 10240:1998Internal and/or external protective coatings forsteel tubes. Specification for hot dip galvanizedcoatings applied in automatic plants

ISE/16

BS EN 10289:2002Steel tubes and fittings for onshore andoffshore pipelines. External liquid applied epoxyand epoxy-modified coatings

ISE/16/-/11

BS EN 10290:2002Steel tubes and fittings for onshore andoffshore pipelines. External liquid appliedpolyurethane and polyurethane-modifiedcoatings

ISE/16/-/11

BS EN 10301:2003Steel tubes and fittings for on and offshorepipelines. Internal coating for the reduction offriction for conveyance of non corrosive gas

ISE/16/-/10

BS EN ISO 10564:1997Soldering and brazing materials. Methods forthe sampling of soft solders for analysis

ISO44/12

BS EN 1045:1997Brazing. Fluxes for brazing. Classification andtechnical delivery conditions

WEE/19

BS EN 1326:1996Gas welding equipment. Small kits for gasbrazing and welding

WEE/18

BS EN 1327:1996Gas welding equipment. Thermoplastic hosesfor welding and allied processes

WEE/18

BS EN 1757:—Safety of industrial trucks. Pedestrian propelledtrucks

BS EN 1757-3:2002Platform trucks

MHE/7

BS EN ISO 1924:—Paper and board. Determination of tensileproperties

BS EN ISO 1924-2:1995Constant rate of elongation method

I/-

BS EN 1949:2002Specification for the installation of LPG systemsfor habitation purposes in leisureaccommodation vehicles and in other vehicles

GSE/24

BS EN ISO 3677:1995Filler metal for soft soldering, brazing andbraze welding. Designation

NFE/27

BS EN ISO 4119:1996Pulps. Determination of stock concentration

I/-

BS EN ISO 6520:—Welding and allied processes. Classification ofgeometric imperfections in metallic materials

BS EN ISO 6520-2:2002Welding with pressure

WEE/1

BS EN ISO 7287:2002Graphical symbols for thermal cuttingequipment

WEE/18

BS EN ISO 8205:—Water-cooled secondary connection cables forresistance welding

BS EN ISO 8205-1:2002Dimensions and requirements for double-conductor connection cables

WEE/29

BS 7629:—Specification for 300/500 V fire resistant electriccables having low emission of smoke andcorrosive gases when affected by fire

BS 7629-1:1997Multicore cables

GEL/20/17

BS 7629-2:1997Multipair cables

GEL/20/17

BS 7713:1993Guide for the maintenance of siliconetransformer liquids

GEL/10

BS 7921:1998Cone top cans of nominal volumes 125 ml to1000 ml for liquid products. Specification

PKW/0

BS EN ISO 186:2002Paper and board. Sampling to determineaverage quality

PAI/11

BS EN 449:2002Specification for dedicated liquefied petroleumgas appliances. Domestic flueless space heaters(including diffusive catalytic combustionheaters)

GSE/24

BS EN 481:1993(BS 6069-3.5:1993)Workplace atmospheres. Size fractiondefinitions for measurement of airborneparticles

EH/2/2

BS EN 484:1998Specification for dedicated liquefied petroleumgas appliances. Independent hotplates,including those incorporating a grill foroutdoor use

GSE/24

BS EN 498:1998Specification for dedicated liquefied petroleumgas appliances. Barbecues for outdoor use

GSE/24

BS EN 730:—Gas welding equipment. Safety devices

BS EN 730-1:2002Incorporating a flame (flashback) arrestor

WEE/18

BS EN 730-2:2002Not incorporating a flame (flashback) arrestor

WEE/18

British Standards Reviewed and Confirmed continued...

34 Update Standards Aug 2007Prices may be subject to change.

Page 29: August 2007

BS EN 29455-14:1993Assessment of tackiness of flux residues

NFE/27

BS ISO 2230:2002Rubber products. Guidelines for storage

PRI/73

BS ISO 3045:2004Oil of bay [Pimenta racemosa (Mill.) J.W.Moore]

AW/54

BS ISO 3053:2004Oil of grapefruit (Citrus x paradisi Macfad.),obtained by expression

AW/54

BS ISO 3063:2004Oil of ylang-ylang (Cananga odorato (Lam)Hook.f.et.Thomson forma genuina

AW/54

BS ISO 3809:2004Oil of lime (cold pressed), Mexican type [Citrusaurantifolia (Christm.) Swingle], obtained bymechanical means

AW/54

BS ISO 4718:2004Oil of lemongrass [Cymbopogon flexuosus (Neesex Steudel) J.F. Watson]

AW/54

BS ISO 4724:2004Oil of cedarwood, Virginian type (Juniperusvirginiana L.)

AW/54

BS ISO 4725:2004Oil of cedarwood, Texas (Juniperus mexicanaSchiede)

AW/54

BS ISO 4730:2004Oil of Melaleuca, terpinen-4-ol type (Tea Treeoil)

AW/54

BS ISO 4733:2004Oil of cardamom [Elettaria cardamomum (L.)Maton]

AW/54

BS ISO 7004:2002Photography. Industrial radiographic films.Determination of ISO speed, ISO averagegradient and ISO gradients G2 and G4 whenexposed to X- and gamma-radiation

CPW/42

BS ISO 7589:2002Photography. Illuminants for sensitometry.Specifications for daylight, incandescenttungsten and printer

CPW/42

BS EN 28167:1992Specification for projections for resistancewelding

WEE/29

BS EN 28206:1992Acceptance tests for oxygen cutting machines.Reproducible accuracy. Operationalcharacteristics

WEE/18

BS EN 28430:—Specification for resistance spot welding.Electrode holders

BS EN 28430-1:1992Taper fixing 1:10

WEE/29

BS EN 28430-2:1992Morse taper fixing

WEE/29

BS EN 28430-3:1992Parallel shank fixing for end thrust

WEE/29

BS EN 29090:1992Specification for gas tightness of equipment forgas welding and allied processes

WEE/18

BS EN 29313:1992Specification for resistance spot weldingequipment. Cooling tubes

WEE/29

BS EN 29454:—Soft soldering fluxes. Classification andrequirements

BS EN 29454-1:1994Classification, labelling and packaging

NFE/27

BS EN 29455:—Soft soldering fluxes. Test methods

BS EN 29455-1:1994Determination of non-volatile matter,gravimetric method

NFE/27

BS EN 29455-5:1993Copper mirror test

NFE/27

BS EN 29455-8:1993Determination of zinc content

NFE/27

BS EN 29455-11:1993Solubility of flux residues

NFE/27

BS EN ISO 12224:—Solder wire, solid and flux cored. Specificationand test methods

BS EN ISO 12224-1:1998Classification and performance requirements

NFE/27

BS EN 12281:2002Printing and business paper. Requirements forcopy paper for dry toner imaging processes

PAI/11

DD ENV 12282:1997Paper. Printing and business paper.Determination of edge dust

I/-

BS EN 14042:2003Workplace atmospheres. Guide for theapplication and use of procedures for theassessment of exposure to chemical andbiological agents

EH/2/2

BS EN ISO 14453:2000Pulps. Determination of acetone-soluble matter

I/-

BS EN ISO 17776:2002Petroleum and natural gas industries. Offshoreproduction installations. Guidance on tools andtechniques for hazard identification and riskassessment

PSE/17

DD CEN ISO/TS 17845:2004Welding and allied processes. Designationsystem for imperfections

WEE/1

BS EN 20187:1993Paper, board and pulps. Standard atmospherefor conditioning and testing and procedure formonitoring the atmosphere and conditioning ofsamples

I/-

BS EN 21974:1994Paper. Determination of tearing resistance(Elmendorf method)

PAI/11

BS EN 23035:1994Single-faced and single-wall corrugatedfibreboard. Determination of flat crushresistance

I/-

BS EN 25827:1992Specification for spot welding. Electrode back-ups and clamps

WEE/29

BS EN 27931:1992Specification for insulation caps and bushes forresistance welding equipment

WEE/29

Update Standards Aug 2007 Prices may be subject to change. 35

Page 30: August 2007

BS 325:1947Specification for black cup and countersunkbolts and nuts

FME/9

This standard has been proposed for obsolescencefor a further period.

BS 450:1958Specification for machine screws and machinescrew nuts (B.S.W. & B.S.F. threads)

FME/9

This standard has been proposed for obsolescencefor a further period.

BS 768:1958Specification for slotted grub screws

FME/9

This standard has been proposed for obsolescencefor a further period.

BS 1083:1965Specification for precision hexagon bolts, screwsand nuts (B.S.W. & B.S.F. threads)

FME/9

This standard has been proposed for obsolescencefor a further period.

BS 1104:1957Specification for general purpose Acme screwthreads

FME/9

This standard has been proposed for obsolescencefor a further period.

BS 1428:—Microchemical apparatus. Volumetric analysis

BS 1428-D1:1965Specification for burettes with pressure-fillingdevice and automatic zero

LBI/36

This standard has been proposed for obsolescenceas it is no longer current but will remain available.

BS 1428-D4:1963Specification for capillary pipettes

LBI/36

This standard has been proposed for obsolescenceas it is no longer current but remains available.

BS 1722:—Fences

BS 1722-13:1978Chain link fences for tennis court surrounds

B/201

This standard has been proposed for obsolescencefor a further period.

BS ISO 18055:—Photography and imaging. Inkjet media.Classification, nomenclature and dimensions

BS ISO 18055-1:2004Photo-grade media (paper and film)

CPW/42

BS ISO 21389:2004Oil of gum turpentine, Chinese (mainly fromPinus massoniana Lamb.)

AW/54

BS ISO 22972:2004Essential oils. Analysis by gas chromatographyon chiral capillary columns. General method

AW/54

BRITISH STANDARDSPROPOSED FORDECLARATION OFOBSOLESCENCE

Declaration of obsolescence indicates thatthe standard is not recommended for usein new equipment, but needs to beretained for the servicing of existingequipment that is expected to have along working life.

A note of any objections to the proposalsbelow should be sent to Debbie Stead,Head of Committee Service Centre –Operations, BSI Head Office, 389 ChiswickHigh Road, London W4 4AL or via emailto [email protected] 30 September, 2007.

BS 46:—Keys and keyways and taper pins

BS 46-1:1958Specification. Keys and keyways

MCE/2

This standard has been proposed for obsolescencefor a further period.

BS 46-3:1951Specification for solid and split taper pins forgeneral engineering purposes

FME/9

This standard has been proposed for obsolescencefor a further period.

BS 57:1951Specification. B.A. screws bolts and nuts

FME/9

This standard has been proposed for obsolescencefor a further period.

BS 93:1951Specification for British Association (B.A.) screw threads with tolerances for sizes 0 B.A. to 16 B.A.

FME/9

This standard has been proposed for obsolescencefor a further period.

BS ISO 9236:—Photography. Sensitometry of screen/filmsystems for medical radiography

BS ISO 9236-1:2004Determination of sensitometric curve shape,speed and average gradient

CPW/42

BS ISO 9843:2002Oil of cedarwood, Chinese type (Cupressusfunebris, Endlicher)

AW/54

BS ISO 10330:2002Photography. Synchronizers, ignition circuitsand connectors for cameras and photoflashunits. Electrical characteristics and test methods

CPW/42

BS ISO 10349:—Photography. Photographic-grade chemicals.Test methods

BS ISO 10349-1:2002General

CPW/42

BS ISO 10349-8:2002Determination of volatile matter

CPW/42

BS ISO 10349-13:2002Determination of pH

CPW/42

BS ISO 15663:—Petroleum and natural gas industries. Life cyclecosting

BS ISO 15663-2:2001Guidance on application of methodology andcalculation methods

PSE/17

BS ISO 15663-3:2001Implementation guidelines

PSE/17

BS ISO 17531:2002Photography. Processing chemicals.Specifications for 4-(N-ethyl-N-2-methanesulfonylaminoethyl)-2-methylphenylenediamine sesquisulfatemonohydrate

CPW/42

BS ISO 18054:2004Oils of orris rhizome (Iris pallida Lam. or Irisgermanica L.). Determination of irone content.Method using gas chromatography on acapillary column

AW/54

British Standards Reviewed and Confirmed continued...

36 Update Standards Aug 2007Prices may be subject to change.

Page 31: August 2007

BS 3550:1963Specification for involute splines

MCE/2

This standard has been proposed for obsolescencefor a further period.

BS 4154:—Corrugated plastics translucent sheets madefrom thermo-setting polyester resin (glass fibrereinforced)

BS 4154-1:1985Specification for material and performancerequirements

B/542/6

This standard has been proposed for obsolescencefor a further period.

BS 4154-2:1985Specification for profiles and dimensions

B/542/6

This standard has been proposed for obsolescencefor a further period.

BS 4168:—Hexagon socket screws and wrench keys: metricseries

BS 4168-1:1981Specification for hexagon socket head capscrews

FME/9

This standard has been proposed for obsolescencefor a further period.

BS 4168-6:1982Specification for hexagon socket button headscrews

FME/9

This standard has been proposed for obsolescencefor a further period.

BS 4168-8:1982Specification for hexagon socket countersunkhead screws

FME/9

This standard has been proposed for obsolescencefor a further period.

BS 4174:1972Specification for self-tapping screws andmetallic drive screws

FME/9

This standard has been proposed for obsolescencefor a further period.

BS 4183:1967Specification for machine screws and machinescrew nuts. Metric series

FME/9

This standard has been proposed for obsolescencefor a further period.

BS 2693-2:1964Recommendations for high grade studs (withClass 5 interference fit threads to AmericanStandard ASA B1.12)

FME/9

This standard has been proposed for obsolescencefor a further period.

BS 2827:1957Specification for machine screw nuts, pressedtype (B.A. and Whitworth form threads)

FME/9

This standard has been proposed for obsolescencefor a further period.

BS 3265:1960Method for the determination of tar acids inblack and white disinfectant fluids

CH/216

This standard has been proposed for obsolescencefor a further period.

BS 3286:1960Method for laboratory evaluation ofdisinfectant activity of quaternary ammoniumcompounds by suspension test procedure

CH/216

This standard has been proposed for obsolescencefor a further period.

BS 3401:1961Specification for beryllium copper crinklewashers

FME/9

This standard has been proposed for obsolescencefor a further period.

BS 3409:—Specification for the tapping of holes to receivewire thread inserts (UNC and UNF threads)

BS 3409-1:1961Diameters 1/4 in and over

FME/9

This standard has been proposed for obsolescencefor a further period.

BS 3409-2:1966Diameters below 1/4 in

FME/9

This standard has been proposed for obsolescencefor a further period.

BS 3410:1961Specification for metal washers for generalengineering purposes

FME/9

This standard has been proposed for obsolescencefor a further period.

BS 3470:1975Specification for field gates and posts

B/201

This standard has been proposed for obsolescencefor a further period.

BS 1768:1963Specification for Unified precision hexagonbolts, screws, & nuts (UNC & UNF threads).Normal series

FME/9

This standard has been proposed for obsolescencefor a further period.

BS 1769:1951Specification. Unified black hexagon bolts,screws, nuts (UNC & UNF threads). Heavy series

FME/9

This standard has been proposed for obsolescencefor a further period.

BS 1802:1951Specification for steel spring washers forgeneral engineering and automobile purposes

FME/9

This standard has been proposed for obsolescencefor a further period.

BS 1804:—Specification for parallel steel dowel pins

BS 1804-1:1966Inch series

FME/9

This standard has been proposed for obsolescencefor a further period.

BS 1804-2:1968Metric series

FME/9

This standard has been proposed for obsolescencefor a further period.

BS 1804-3:1973Parallel and taper types having screw threadsfor extraction purposes. Metric series

FME/9

This standard has been proposed for obsolescencefor a further period.

BS 2058:1961Specification for Lunge-Rey weighing pipette

LBI/36

This standard has been proposed for obsolescenceas it is no longer current but remains available.

BS 2061:1953Specification for phosphor bronze springwashers for general engineering purposes

FME/9

This standard has been proposed for obsolescencefor a further period.

BS 2693:—Specification for screwed studs

BS 2693-1:1956General purpose studs

FME/9

This standard has been proposed for obsolescencefor a further period.

Update Standards Aug 2007 Prices may be subject to change. 37

Page 32: August 2007

BS 7152:1991Guide to choice of chemical disinfectants

CH/216

This standard has been proposed for obsolescencefor a further period.

BS 7371:—Coatings on metal fasteners

BS 7371-3:1993Specification for electroplated zinc andcadmium coatings

FME/9

This standard has been proposed for obsolescencefor a further period.

BS 7371-11:1993Specification for zinc flake non-electrolyticallyapplied cured coatings

FME/9

This standard has been proposed for obsolescencefor a further period.

BS 7724:1994Specification for split pins (metric series)

FME/9

This standard has been proposed for obsolescencefor a further period.

BS 9210:1984Specification for radio frequency connectors ofassessed quality: generic data and methods oftest

EPL/46

This standard has been proposed for obsolescencefor a further period.

BRITISH STANDARDSWITHDRAWN

If any standard in this list has beenamended since publication, allamendments published to date are alsowithdrawn

BS 594:—Hot rolled asphalt for roads and other pavedareas

BS 594-2:2003Specification for transport, laying andcompaction of hot rolled asphalt

B/510

Superseded by BS 594987:2007

BS 747:2000Reinforced bitumen sheets for roofing.Specification

B/546

Superseded by BS EN 13707:2004

BS 1902:—Methods of testing refractory materials

BS 1902-5.4:1989Refractory and thermal properties.Determination of thermal expansion (for largetest pieces) (method 1902-504)

RPI/1

Superseded by BS EN 993-19:2004

BS 1902-7:—Unshaped refractories used in monolithicconstruction

BS 1902-7.3:1987Preparation of test pieces from dense castablesby vibration (method 1902-703)

RPI/1

Superseded by BS EN 1402-5:2003

BS 1902-7.4:1987Preparation of test pieces from insulatingcastables (method 1902-704)

RPI/1

Superseded by BS EN 1402-5:2003

BS 1902-7.5:1987Preparation of test pieces from mouldables andramming mixes (method 1902-705)

RPI/1

Superseded by BS EN 1402-5:2003

BS 1902-7.6:1987Testing of materials as preformed test pieces

RPI/1

Superseded by BS EN 1402-6:2003

BS 4203:—Extruded rigid PVC corrugated sheeting

BS 4203-1:1980Specification for performance requirements

B/542/6

This standard has been proposed for obsolescencefor a further period.

BS 4203-2:1980Specification for profiles and dimensions

B/542/6

This standard has been proposed for obsolescencefor a further period.

BS 4929:—Specification for steel hexagon prevailing-torque type nuts

BS 4929-1:1973Metric series

FME/9

This standard has been proposed for obsolescencefor a further period.

BS 4929-2:1973Unified (inch) series

FME/9

This standard has been proposed for obsolescencefor a further period.

BS 4933:1973Specification for ISO metric black cup andcountersunk head bolts and screws withhexagon nuts

FME/9

This standard has been proposed for obsolescencefor a further period.

BS 5409:—Specification for nylon tubing

BS 5409-2:1978Plasticized and unplasticized nylon tubing types11 and 12 for use primarily in the automobileindustry

PRI/66

This standard has been proposed for obsolescencefor a further period.

BS 6408:1983Specification for clothing made from coatedfabrics for protection against wet weather

PH/3

This standard has been proposed for obsolescencefor a further period.

BS 6480:1988Specification for impregnated paper-insulatedlead or lead alloy sheathed electric cables ofrated voltages up to and including 33000 V

GEL/20/16

This standard has been proposed for obsolescenceas it is no longer used.

British Standards Proposed for Obsolescence continued...

38 Update Standards Aug 2007Prices may be subject to change.

Help Us to Help

You!

Always quote your Customer Number

Don’t know your number?

Contact Customer Services

020 8996 9001

who will be happy to check it for you

Page 33: August 2007

BS 7206:1990Specification for unvented hot water storageunits and packages

B/504

Superseded by BS EN 12897:2006

BS 7535:1992Guide to the use of electrical apparatuscomplying with BS 5501 or BS 6941 in thepresence of combustible dusts

GEL/31/20

This standard has been withdrawn as theaccompanying standards, BS 5501 and BS 6941have now been withdrawn

BIP 3016:2004Technical product specification (TPS).Specification

BS EN 203:—Specification for gas heated catering equipment

BS EN 203-2:1995Rational use of energy

GSE/19

Superseded by BS EN 203-2-1:2005, BS EN 203-2-10:2007, BS EN 203-2-11:2006, BS EN 203-2-2:2006, BS EN 203-2-3:2005, BS EN 203-2-4:2005,BS EN 203-2-6:2005, BS EN 203-2-7:2007,BS EN 203-2-8:2005 and BS EN 203-2-9:2005

BS EN 12572:1999Artificial climbing structures. Protection points,stability requirements and test methods

SW/136

Superseded by BS EN 12572-1:2007

BS EN 50132:—Alarm systems

BS EN 50132-2-1:1998CCTV surveillance systems for use in securityapplications. Black and white cameras

GW/1

This standard has been withdrawn, as thecorresponding EN standard has now beenwithdrawn

BS EN 50132-4-1:2001Black and white monitors

GW/1

This standard has been withdrawn, as thecorresponding EN standard has now beenwithdrawn

BS EN 60335:—Specification for safety of household and similarelectrical appliances

BS EN 60335-2:—Particular requirements

BS EN 60335-2-7:1997Washing machines

CPL/61/14

Superseded by BS EN 60335-2-7:2001

BS 6100-1.2:1992Spaces

B/500

Superseded by BS 6100-2:2007

BS 6100-1.5.1:1999Operations. Associated plant and equipment.Co-ordination of dimensions. Tolerances andaccuracy

B/500

Superseded by BS 6100-11:2007

BS 6100-1.7.1:1986Characteristics and performance. Performance

B/500

Superseded by BS 6100-11:2007

BS 6100-1.8:1990Environment and physical planning

B/500

Superseded by BS 6100-2:2007

BS 6100-4:—Forest products

BS 6100-4.1:1992Characteristics and properties of timber andwood based panel products

B/500

Superseded by BS 6100-8:2007

BS 6100-4.2:1984Sizes and quantities of solid timber

B/500

Superseded by BS 6100-8:2007

BS 6100-4.3:1984Wood based panel products

B/500

Superseded by BS 6100-8:2007

BS 6100-4.4:1992Carpentry and joinery

B/500

Superseded by BS 6100-8:2007

BS 6100-4.5:1984Cork

B/500

Superseded by BS 6100-8:2007

BS 6323:—Specification for seamless and welded steeltubes for automobile, mechanical and generalengineering purposes

BS 6323-1:1982General requirements

ISE/8

Superseded by BS EN 10296-1:2003, BS EN 10297-1:2003, BS EN 10305-1:2002, BS EN 10305-2:2002,BS EN 10305-3:2002, BS EN 10305-4:2003 andBS EN 10305-5:2003

BS 3900:—Methods of test for paints

BS 3900-D11:1998Optical tests on paint films. Determination ofcontrast ratio (opacity) of light-coloured paintsat a fixed spreading rate

STI/10

Superseded by the dual numbered standardBS EN ISO 6504-3:2007, BS 3900-D11:2007

BS 3934:—Mechanical standardization of semiconductordevices

BS 3934-1:1992Recommendations for the preparation ofdrawings of semiconductor devices

EPL/47

Superseded by BS IEC 60191-1:2007

BS 4617:1983Methods for determining the performance ofpumps and motors for hydraulic fluid powertransmission

MCE/18

Superseded by BS ISO 4409:2007

BS 4727:—Glossary of electrotechnical, power,telecommunication, electronics, lighting andcolour terms

BS 4727-2:Group 08:1994Terms particular to power engineering. Electriccables

GEL/1

This standard has been withdrawn as it is outdated,and since the IEC is no longer published in paperform there is no necessity for this standard tocontinue in existence

BS 4987:—Coated macadam (asphalt concrete) for roadsand other paved areas

BS 4987-2:2003Specification for transport, laying andcompaction

B/510

Superseded by BS 594987:2007

BS 5486:—Low-voltage switchgear and controlgearassemblies

BS 5486-11:1989Specification for particular requirements offuseboards

PEL/17/3

This standard has been withdrawn as it is no longerused

BS 6100:—Glossary of building and civil engineering terms

BS 6100-1:—General and miscellaneous

BS 6100-1.1:1987Types of building

B/500

Superseded by BS 6100-2:2007

Update Standards Aug 2007 Prices may be subject to change. 39

Page 34: August 2007

BRITISH STANDARDS UNDERREVIEW

The following British Standards arecurrently under review to see if theyshould be confirmed, revised orwithdrawn.

Comments are welcome and should besent to Debbie Stead, Head of CommitteeService Centre – Operations, BSI HeadOffice, 389 Chiswick High Road, LondonW4 4AL by 30 September, 2007, inorder to be considered by the relevantUK Committee.

BS 3996:1978Specification for colour coding for one-markand graduated pipettes (including requirementsfor the service performance of the colourcoding enamels)

LBI/36

BS 6396:2002Electrical systems in office furniture and officescreens. Specification

FW/0

BS 6523:1984Specification for glass beakers for laboratoryuse

LBI/36

BS EN ISO 1234:1998Split pins

FME/9/3

BS EN 1661:1998Hexagon nuts with flange

FME/9/3

BS EN 1662:1998Hexagon bolts with flange. Small series

FME/9/3

BS EN 1663:1998Prevailing torque type hexagon nuts withflange (with non-metallic insert)

FME/9/3

BS EN 1664:1998Prevailing torque type all-metal hexagon nutswith flange

FME/9/3

BS EN 1665:1997Hexagon bolts with flange. Heavy series

FME/9

BS EN 1666:1998Prevailing torque type hexagon nuts withflange (with non-metallic insert) with metricfine pitch thread

FSH/21

BS ISO 31:—Quantities and units

BS ISO 31-3:1992Mechanics

SS/7

Superseded by BS ISO 80000-4:2006

BS ISO 31-4:1992Heat

SS/7

Superseded by BS ISO 80000-5:2007

BS ISO 31-7:1992Acoustics

SS/7

Superseded by BS EN ISO 80000-8:2007

BS ISO 8995:2002Lighting of indoor work places

PH/9

This standard has been withdrawn as it conflictswith the European Standard, BS EN 12464-1:2002

PD 6541:1995Guide to selection and erection of electricalequipment. Wiring systems. Limitation oftemperature rises of connecting interfaces

JPEL/64

Superseded by PD CLC/TR 50479:2007

PD 6590:1996Recommendations for dimensional co-ordination between enclosures and built-indevices for rail fixing for household and similarinstallations

PEL/23/1

Superseded by PD CLC/TR 50473:2007

BS AU 50:—Tyres and wheels

BS AU 50-1:—Tyres

BS AU 50-1.1.1c:2001Car tyres. Tyres (metric series)

AUE/4

Superseded by BS ISO 4000-1:2007

BS AU 50-1.5.2:1994Industrial vehicle tyres. Specification forpneumatic tyres (metric series) on 5° tapered orflat base rims: designation, dimensions andmarking

AUE/4

Superseded by BS ISO 3739-1:2007

BS AU 50-4.1.1a:2001Rim profiles and dimensions. Car rims.Specification for metric series rims

AUE/4

Superseded by BS ISO 4000-2:2007

BS EN 60335-2-7:2001Washing machines

CPL/61/14

Superseded by BS EN 60335-2-7:2003

BS EN 60335-2-11:1996Tumbler dryers

CPL/61/14

Superseded by BS EN 60335-2-11:2001

BS EN 60335-2-11:2001Tumbler dryers

CPL/61/14

Superseded by BS EN 60335-2-11:2003

BS EN 60335-2-24:1999Particular requirements for refrigeratingappliances, ice-cream appliances and ice-makers

CPL/61/3

Superseded by BS EN 60335-2-24:2001

BS EN 60335-2-24:2001Particular requirements for refrigeratingappliances, ice-cream appliances and ice-makers

CPL/61/3

Superseded by BS EN 60335-2-24:2003

BS EN 60335-2-57:1992Ice-cream appliances with incorporated motor-compressors

CPL/61/3

Superseded by BS EN 60335-2-24:2001

BS EN 60335-2-86:2001Particular requirements for electric fishingmachines

CPL/61/8

Superseded by BS EN 60335-2-86:2003

BS EN 61747:—Liquid crystal and solid-state display devices

BS EN 61747-3-1:2000Liquid crystal display (LCD) cells. Blank detailspecification

EPL/47

Superseded by BS EN 61747-3-1:2006

DD ENV 13106:2000Road transport and traffic telematics. DATEXtraffic and travel data dictionary (version 3.1a)

EPL/278

This standard has been withdrawn as it cannot beupgraded to a BS EN standard, and it expired in2005

DD ENV 13777:2000Road transport and traffic telematics. DATEXspecifications for data exchange between trafficand travel information centres (version 1.2a)

EPL/278

This standard has been withdrawn as it cannot beupgraded to a BS EN standard, and it expired in2005

British Standards Withdrawn continued...

40 Update Standards Aug 2007Prices may be subject to change.

Page 35: August 2007

BS EN ISO 10684:2004Fasteners. Hot dip galvanized coatings

FME/9/1

BS EN 12829:1998Surface active agents. Preparation of waterwith known calcium hardness

CII/34

BS EN 13405:2002Surface active agents. Determination of dialkyl-tetralins content in linear alkylbenzene by highperformance liquid chromatography (HPLC)

CII/34

BS EN 13717:2002Surface active agents. Determination ofprimary, secondary and tertiary amino nitrogen.Potentiometric titration

CII/34

BS EN ISO 13936:—Textiles. Determination of the slippageresistance of yarns at a seam in woven fabrics

BS EN ISO 13936-1:2004Fixed seam opening method

TCI/24

BS EN ISO 13936-2:2004Fixed load method

TCI/24

BS EN 13955:2002Surface active agents. Determination of Krafftpoint and solubility of ionic surface activeagents

CII/34

BS EN 13996:2002Surface active agents. Foaming power andantifoaming power. Turbine stirring method

CII/34

BS EN ISO 15975:2002Closed end blind rivets with break pull mandreland protruding head. AI/AIA

FME/6

BS EN ISO 15976:2002Closed end blind rivets with break pull mandreland protruding head. St/St

FME/6

BS EN ISO 15977:2002Open end blind rivets with break pull mandreland protruding head. AIA/St

FME/6

BS EN ISO 15978:2002Open end blind rivets with break pull mandreland countersunk head. AIA/St

FME/6

BS EN ISO 8739:1998Grooved pins. Full-length parallel grooved, withpilot

FME/9/3

BS EN ISO 8740:1998Grooved pins. Full-length parallel grooved, withchamfer

FME/9/3

BS EN ISO 8741:1998Grooved pins. Half-length reverse-tapergrooved

FME/9/3

BS EN ISO 8742:1998Grooved pins. One-third-length centre grooved

FME/9/3

BS EN ISO 8743:1998Grooved pins. Half-length centre grooved

FME/9/3

BS EN ISO 8744:1998Grooved pins. Full-length taper grooved

FME/9/3

BS EN ISO 8745:1998Grooved pins. Half-length taper grooved

FME/9/3

BS EN ISO 8746:1998Grooved pins with round head

FME/9/3

BS EN ISO 8747:1998Grooved pins with countersunk head

FME/9/3

BS EN ISO 10484:2004Widening test on nuts

FME/9/1

BS EN ISO 10511:1998Prevailing torque type hexagon thin nuts (withnon-metallic insert)

FME/9/2

BS EN ISO 10512:1998Prevailing torque type hexagon nuts (with non-metallic insert), style 1, with metric fine pitchthread. Property classes 6, 8 and 10

FME/9/2

BS EN ISO 10513:1998Prevailing torque type all-metal hexagon nut,style 2, with metric fine pitch thread. Propertyclasses 8, 10 and 12

FME/9/2

BS EN ISO 10642:2004Hexagon socket countersunk head screws

FME/9/3

BS EN 1667:1998Prevailing torque type all-metal hexagon nutswith flange with metric fine pitch thread

FSH/21

BS EN ISO 2338:1998Parallel pins of unhardened steel and austeniticstainless steel

FME/9/3

BS EN ISO 3506:—Mechanical properties of corrosion-resistantstainless-steel fasteners

BS EN ISO 3506-1:1998Bolts, screws and studs

FME/9/1

BS EN ISO 3506-2:1998Nuts

FME/9/1

BS EN ISO 3506-3:1998Set screws and similar fasteners not undertensile stress

FME/9/1

BS EN ISO 4762:2004Hexagon socket head cap screws

FME/9/3

BS EN ISO 7040:1998Prevailing torque type hexagon nuts (with non-metallic insert), style 1. Property classes 5, 8 and10

FME/9/2

BS EN ISO 7042:1998Prevailing torque type all-metal hexagon nuts.Property classes 5, 8, 10 and 12

FME/9/2

BS EN ISO 7380:2004Hexagon socket button head screws

FME/9/3

BS EN ISO 7719:1998Prevailing torque type all-metal hexagon nuts,style 1. Property classes 5, 8 and 10

FME/9/2

BS EN ISO 8733:1998Parallel pins with internal thread, ofunhardened steel or austenitic stainless steel

FME/9/3

BS EN ISO 8734:1998Parallel pins, of hardened steel or martensiticstainless steel (Dowel pins)

FME/9/3

BS EN ISO 8735:1998Parallel pins with internal thread, of hardenedsteel or martensitic stainless steel

FME/9/3

Update Standards Aug 2007 Prices may be subject to change. 41

Page 36: August 2007

BS 1722:—Fences

BS 1722-12:2006/Corrigendum 1Specification for steel palisade fences

B/201

BS 3621 (Revision)Thief resistant lock assembly. Key egress

will supersede BS 3621:2004

B/538/4

BS 4551 (Revision)Mortar. Methods of test for mortar. Chemicalanalysis and physical testing

will supersede BS 4551:2005

B/519/2

BS 4875:—Strength and stability of furniture

BS 4875-1 (Revision)Requirements for the strength and durability ofthe structure of domestic seating

will supersede BS 4875-1:2001

FW/0

BS 5867:—Specification for fabrics for curtains and drapes

BS 5867-2 (Revision)Flammability requirements

will supersede BS 5867-2:1980

TCI/66/-/8

BS 6073:—Precast concrete masonry units

BS 6073-2 (Revision)Method for specifying precast concrete masonryunits

will supersede BS 6073-2:1981

B/519/1

BS 6744:2001/Amendment 2Stainless steel bars for the reinforcement of anduse in concrete. Requirements and test methods

ISE/9/1

BS 7430 (Revision)Code of practice for earthing

will supersede BS 7430:1998

GEL/600

BS 7448:—Fracture mechanics toughness tests

BS 7448-3:2005/Corrigendum 1Method for determination of fracturetoughness of metallic materials at rates ofincrease in stress intensity factor greater than3.0 MPa m0.5 s-1

ISE/NFE/4

BS EN ISO 23429:2004Gauging of hexagon sockets

FME/9/3

BS EN 24766:1992Slotted set screws with flat point

FME/9

BS EN 27434:1992Slotted set screws with cone point

FME/9

BS EN 27435:1992Slotted set screws with long dog point

FME/9

BS EN 27436:1992Slotted set screws with cup point

FME/9

BS EN 28736:1992Taper pins with internal thread, unhardened

FME/9

BS EN 28737:1992Taper pins with external thread, unhardened

FME/9

BS EN 28738:1992Plain washers for clevis pins. Product grade A

FME/9

BS EN 28749:1992Pins and grooved pins. Shear test

FME/9

BS ISO 10290:1993Textiles. Cotton yarns. Specifications

TCI/24

NEW WORK STARTED

The reference number of the committeeresponsible for each item of new workstarted is given after each entry.

Where a work item has the temporarydesignation “BS EN XXXX”, it has not yetbeen allocated a standard number by theEuropean standards body.

BS 148 (Revision)Specification for unused and reclaimed mineralinsulating oils for transformers and switchgear

will supersede BS 148:1998

GEL/10

BS 799:—Oil burning equipment

BS 799-5 (Revision)Specification for oil storage tanks

will supersede BS 799-5:1987

RHE/13

BS EN ISO 15979:2002Open end blind rivets with break pull mandreland protruding head. St/St

FME/6

BS EN ISO 15980:2002Open end blind rivets with break pull mandreland countersunk head. St/St

FME/6

BS EN ISO 15981:2002Open end blind rivets with break pull mandreland protruding head. AIA/AIA

FME/6

BS EN ISO 15982:2002Open end blind rivets with break pull mandreland countersunk head. AIA/AIA

FME/6

BS EN ISO 15983:2002Open end blind rivets with break pull mandreland protruding head. A2/A2

FME/6

BS EN ISO 15984:2002Open end blind rivets with break pull mandreland countersunk head. A2/A2

FME/6

BS EN ISO 16426:2002Fasteners. Quality assurance system

FME/9

BS EN ISO 16582:2002Open end blind rivets with break pull mandreland protruding head. Cu/St or Cu/Br or Cu/SSt

FME/6

BS EN ISO 16583:2002Open end blind rivets with break pull mandreland countersunk head. Cu/St or Cu/Br or Cu/SSt

FME/6

BS EN ISO 16584:2002Open end blind rivets with break pull mandreland protruding head. NiCu/St or NiCu/SSt

FME/6

BS EN ISO 16585:2002Closed end blind rivets with pull mandrel andprotruding head. A2/SSt

FME/6

BS EN 22339:1992Taper pins, unhardened

FME/9

BS EN 22340:1992Clevis pins without head

FME/9

BS EN 22341:1992Clevis pins with head

FME/9

British Standards Under Review continued...

42 Update Standards Aug 2007Prices may be subject to change.

Page 37: August 2007

BS EN 1264-4 (Revision)Installation

will supersede BS EN 1264-4:2001

RHE/6

BS EN 1317:—Road restraint systems

BS EN 1317-3 (Revision)Performance classes, impact test acceptancecriteria and test methods for crash cushions

will supersede BS EN 1317-3:2000

B/509/1

BS EN 1317-5:2007/Amendment 1Product requirements and evaluation ofconformity for vehicle restraint systems

B/509/1

BS EN 1452:—Plastics piping systems for water supply.Unplasticized poly(vinyl chloride) (PVC-U)

BS EN 1452-1 (Revision)General

will supersede BS EN 1452-1:2000

PRI/88/2

BS EN 1452-2 (Revision)Pipes

will supersede BS EN 1452-2:2000

PRI/88/2

BS EN 1452-3 (Revision)Fittings

will supersede BS EN 1452-3:2000

PRI/88/2

BS EN 1452-4 (Revision)Valves and ancillary equipment

will supersede BS EN 1452-4:2000

PRI/88/2

BS EN 1452-5 (Revision)Fitness for purpose of the system

will supersede BS EN 1452-5:2000

PRI/88/2

BS EN 1777 (Revision)Hydraulic platforms (HPs) for fire fighting andrescue services. Safety requirements and testing

will supersede BS EN 1777:2004

FSH/17/3

BS EN 1828 (Revision)Health informatics. Categorial structure forclassifications and coding systems of surgicalprocedures

will supersede BS EN 1828:2002

IST/35

BS EN 167 (Revision)Personal eye protection. Optical test methods

will supersede BS EN 167:2002

PH/2

BS EN 168 (Revision)Personal eye-protection. Non-optical testmethods

will supersede BS EN 168:2002

PH/2

BS EN 203:—Gas heated catering equipment

BS EN 203-3Materials and parts in contact with food andother sanitary aspects

GSE/19

BS EN 506 (Revision)Roofing products from metal sheet.Specification for self-supporting products ofcopper or zinc sheet

will supersede BS EN 506:2000

B/542

BS EN 508:—Roofing products from metal sheet.Specification for self-supporting products ofsteel, aluminium or stainless steel sheet

BS EN 508-1 (Revision)Steel

will supersede BS EN 508-1:2000

B/542

BS EN 508-2 (Revision)Aluminium

will supersede BS EN 508-2:2000

B/542

BS EN 508-3 (Revision)Stainless steel

will supersede BS EN 508-3:2000

B/542

BS EN 923:2005/Amendment 1Adhesives. Terms and definitions

PRI/52

BS EN 1173 (Revision)Copper and copper alloys. Material condition ortemper designation

will supersede BS EN 1173:1996

NFE/34

BS EN 1264:—Floor heating. Systems and components

BS EN 1264-3 (Revision)Dimensioning

will supersede BS EN 1264-3:1998

RHE/6

BS 7875 (Revision)Specification for saddle trees made fromsynthetic materials

will supersede BS 7875:1996

SW/14/-/7

BS 8102 (Revision)Code of practice for protection of structuresagainst water from the ground

will supersede BS 8102:1990

B/526

BS 8508Guide to design and installation of smallwastewater treatment systems

B/505

BS 8621 (Revision)Thief resistant lock assembly. Keyless egress

will supersede BS 8621:2004

B/538/4

BS 25777:—ICT continuity

BS 25777-2Specification for continuity management system

BCM/1

DD CEN/TS 13388Copper and copper alloys. Compendium ofcompositions and products

will supersede PD 6641:1999

NFE/34

BS EN 71:—Safety of toys

BS EN 71-1:2005/Amendment 6Mechanical and physical properties

CW/15

BS EN 71-1:2005/Amendment 7Mechanical and physical properties

CW/15

BS EN 71-8:2003/Amendment 4Swings, slides and similar activity toys forindoor and outdoor family domestic use

CW/15

BS EN 115:—Safety of escalators and moving walks

BS EN 115-1Construction and installation

MHE/4

BS EN 166 (Revision)Personal eye protection. Specifications

will supersede BS EN 166:2002

PH/2

Update Standards Aug 2007 Prices may be subject to change. 43

Page 38: August 2007

BS EN ISO 9168Dental handpieces. Hose connectors

will supersede BS EN 29168:1994

CH/106/4

BS EN ISO 9917:—Dental water-based cements

BS EN ISO 9917-2 (Revision)Light-activated cements

will supersede BS EN ISO 9917-2:2000

CH/106/1

BS EN 10120 (Revision)Steel sheet and strip for welded gas cylinders

will supersede BS EN 10120:1997

ISE/73/2

BS EN ISO 10139:—Dentistry. Soft lining materials for removabledentures

BS EN ISO 10139-2 (Revision)Materials for long-term use

will supersede BS EN ISO 10139-2:2001

CH/106/2

BS EN 10208:—Steel pipes for pipelines for combustible fluids.Technical delivery conditions

BS EN 10208-2 (Revision)Pipes of requirement class B

will supersede BS EN 10208-2:1997

PSE/17/2

BS EN ISO 11609 (Revision)Dentistry. Toothpastes. Requirements, testmethods and marking

will supersede BS EN ISO 11609:1998

CH/106/7

BS EN 12254:1999/Amendment 2Screens for laser working places. Safetyrequirements and testing

PH/2

BS EN 12311:—Flexible sheets for waterproofing.Determination of tensile properties

BS EN 12311-2 (Revision)Plastic and rubber sheets for roofwaterproofing

will supersede BS EN 12311-2:2000

B/546

BS EN 12317:—Flexible sheets for waterproofing

BS EN 12317-2 (Revision)Plastic and rubber sheets for roofwaterproofing

will supersede BS EN 12317-2:2000

B/546

BS EN 4113 (Revision)Aerospace series. Clamps, loop (P type) incorrosion resisting steel with rubber cushioning.Dimensions and masses

will supersede BS EN 4113:2001

ACE/69

BS EN 4114 (Revision)Aerospace series. Clamps, loop (“P” type) inaluminium alloy with rubber cushioning.Dimensions and masses

will supersede BS EN 4114:2001

ACE/69

BS EN 4115 (Revision)Aerospace series. Cushion, rubber for clamps.Dimensions, masses

will supersede BS EN 4115:2001

ACE/69

BS EN 4234 (Revision)Aerospace series. Clamps, worm drive.Dimensions, masses

will supersede BS EN 4234:2006

ACE/69

BS EN ISO 5495Sensory analysis. Methodology. Pairedcomparison test

AW/12

BS EN ISO 6579:2002/Amendment 1Microbiology of food and animal feeding stuffs.Horizontal method for the detection ofSalmonella spp

AW/9

BS EN ISO 6876 (Revision)Dental root canal sealing materials

will supersede BS EN ISO 6876:2002

CH/106/1

BS EN ISO 7711:—Dental rotary instruments. Diamondinstruments

BS EN ISO 7711-1:1998/Amendment 1Dimensions, requirements, marking andpackaging

will supersede BS EN ISO 6876:2002

CH/106/4

BS EN ISO 7885 (Revision)Sterile dental injection needles for single use

will supersede BS EN ISO 7885:2001

CH/106/4

BS EN ISO 9117Paints and varnishes. Determination of through-dry state and through-dry time. Method of test

will supersede BS EN 29117:1992

STI/10

BS EN 1847 (Revision)Flexible sheets for waterproofing. Plastic andrubber sheets for roof waterproofing. Methodsfor exposure to liquid chemicals including water

will supersede BS EN 1847:2001

B/546

BS EN 1849:—Flexible sheets for waterproofing.Determination of thickness and mass per unitarea

BS EN 1849-2 (Revision)Plastic and rubber sheets for roofwaterproofing

will supersede BS EN 1849-2:2001

B/546

BS EN 1914 (Revision)Inland navigation vessels. Ship’s boats

will supersede BS EN 1914:1997

SME/32/-/7

BS EN 1982 (Revision)Copper and copper alloys. Ingots and castings

will supersede BS EN 1982:1999

NFE/34

BS EN ISO 3107 (Revision)Dentistry. Zinc oxide/eugenol and zincoxide/non-eugenol cements

will supersede BS EN ISO 3107:2004

CH/106/1

BS EN 3475:—Aerospace series. Cable, electrical, aircraft use.Test methods

BS EN 3475-515Crush resistance

ACE/6/-/2

BS EN 3475-812Return loss (VSWR)

ACE/6/-/2

BS EN 3730 (Revision)Aerospace series. Clamps, saddle. Fixed andsliding version in aluminium alloy with rubbercushioning. Dimensions. Masses

will supersede BS EN 3730:2001

ACE/69

BS EN ISO 3823:—Dental rotary instruments. Burs

BS EN ISO 3823-2:2003/Amendment 1Finishing burs

CH/106/4

BS EN ISO 4049 (Revision)Dentistry. Polymer-based filling, restorative andluting materials

will supersede BS EN ISO 4049:2000

CH/106/1

New Work Started continued...

44 Update Standards Aug 2007Prices may be subject to change.

Page 39: August 2007

BS EN 15116Ventilation in buildings. Chilled beams. Testingand rating of active chilled beams

RHE/2

BS EN ISO 15136:—Downhole equipment for petroleum andnatural gas industries. Progressing cavity pumpsystems for artificial lift

BS EN ISO 15136-1 (Revision)Pumps

will supersede BS EN ISO 15136-1:2001

PSE/17/-/4

BS EN 15316:—Heating systems in buildings. Method forcalculation of system energy requirements andsystem efficiencies

BS EN 15316-4-7Space heating generation systems, biomasscombustion systems

RHE/24

BS EN 15715Thermal insulation products. Instructions formounting and fixing for reaction to fire testing.Factory made products

B/540

BS EN ISO 16773:—Paints and varnishes. Electrochemicalimpedance spectroscopy (EIS) of high-impedance coated samples

BS EN ISO 16773-3Procedures and requirements for processingand analysis of data from dummy cells

STI/10

BS EN ISO 18779 (Revision)Medical devices for conserving oxygen andoxygen mixtures. Particular requirements

will supersede BS EN ISO 18779:2005

CH/121/5

BS EN ISO 19910Petroleum, petrochemical and natural gasindustries. Materials selection for upstreamoperations

PSE/17

BS EN ISO 28199:—Paints and varnishes. Evaluation of properties ofcoating systems caused by application

BS EN ISO 28199-1Terminology and preparation of test panels

STI/10

BS EN ISO 28199-2Colour stability, process hiding power, resolving,overspray absorption, wetting, surface texture,mottling

STI/10

BS EN 13589 (Revision)Methods of test for petroleum and its products.Bitumen and bituminous binders.Determination of the tensile properties ofmodified bitumen by the force ductility method

will supersede BS EN 13589:2003, BS 2000-520:2003

PTI/13

BS EN 13613 (Revision)Roller sports equipment. Skateboards. Safetyrequirements and test methods

will supersede BS EN 13613:2001

SW/136

BS EN 13843 (Revision)Roller sports equipment. Inline-skates. Safetyrequirements and test methods

will supersede BS EN 13843:2003

SW/136

BS EN 14066 (Revision)Natural stone test methods. Determination ofresistance to ageing by thermal shock

will supersede BS EN 14066:2003

B/545

BS EN 14081:—Timber structures. Strength graded structuraltimber with rectangular cross section

BS EN 14081-4:2005/Amendment 1Machine grading. Grading machine settings formachine controlled systems

B/518

BS EN 14398:—Cryogenic vessels. Large transportable non-vacuum insulated vessels

BS EN 14398-2:2003/Amendment 2Design, fabrication, inspection and testing

PVE/18

BS EN 14488:—Testing sprayed concrete

B/517/10

BS EN 14488-4:2005/Amendment 1Bond strength of cores by direct tension

B/517/10

BS EN ISO 14723 (Revision)Petroleum and natural gas industries. Pipelinetransportation systems. Subsea pipeline valves

will supersede BS EN ISO 14723:2002

PSE/17/2

BS EN 14765:2005/Amendment 1Bicycles for young children. Safety requirementsand test methods

GME/25

BS EN 12845:2004/Amendment 1Fixed firefighting systems. Automatic sprinklersystems. Design, installation and maintenance

FSH/18/2

BS EN 12845:2004/Amendment 2Fixed firefighting systems. Automatic sprinklersystems. Design, installation and maintenance

FSH/18/2

BS EN 12859 (Revision)Gypsum blocks. Definitions, requirements andtest methods

will supersede BS EN 12859:2001

B/544/1

BS EN 13146:—Railway applications. Track. Test methods forfastening systems

BS EN 13146-9Determination of stiffness

RAE/2/-/5

BS EN 13172 (Revision)Thermal insulating products. Evaluation ofconformity

will supersede BS EN 13172:2001

B/540

BS EN 13341 (Revision)Thermoplastics static tanks for above groundstorage of domestic heating oils, kerosene anddiesel fuels. Blow moulded polyethylene,rotationally moulded polyethylene andpolyamide 6 by anionic polymerization tanks.Requirements and test methods

will supersede BS EN 13341:2005

PRI/62

BS EN 13422:2004/Amendment 1Vertical road signs. Portable deformablewarning devices and delineators. Portable roadtraffic signs. Cones and cylinders

B/509/3

BS EN ISO 13485:2003/Corrigendum 1Medical devices. Quality management systems.Requirements for regulatory purposes

CH/210/1

BS EN 13573 (Revision)Inland navigation vessels. Anchoring, coupling,towing, hauling and mooring systems

will supersede BS EN 13573:2001

SME/32/-/7

BS EN 13588 (Revision)Bitumen and bituminous binders.Determination of cohesion of bituminousbinders with pendulum test

will supersede BS EN 13588:2004, BS 2000-522:2004

PTI/13

Update Standards Aug 2007 Prices may be subject to change. 45

Page 40: August 2007

BS EN 62529Standard for signal and test definition

GEL/93

BS EN 62530Standard for system verilog. Unified hardwaredesign, specification and verification language

GEL/93

BS EN 62531Standard for property specification language(PSL)

GEL/93

BS EN 62535Test method for detection of potentiallycorrosive sulfur in used and unused insulatingoil

GEL/10

BS EN 62538Categorization of optical devices

GEL/86

BS EN XXXXXRailway applications. Wheel/rail frictionmanagement. Testing methods for flange/raillubricants

RAE/3/-/6

BS EN XXXXXNon-destructive testing. Radiation method.Computed tomography

WEE/46

BS EN XXXXXNon-destructive testing. Acoustic emission.Testing of fibre-reinforced plastics. Specificmethodology and general evaluation criteria

WEE/46

BS EN XXXXXRailway applications. Wheel/rail frictionmanagement. Top-of-rail friction management

RAE/3/-/6

BS ISO XX:—Industrial tyres and rims. Pneumatic tyres on 15 degrees tapered rims

BS ISO XX-1Designation, dimensions and marking

AUE/4

BS ISO XX-2Load ratings

AUE/4

BS ISO XX-315 degrees tapered rims

AUE/4

BS EN 62137:—Surface munting technology

BS EN 62137-1:—Environmental and endurance test methods forsurface mount solder joints

BS EN 62137-1-4Cyclic bending test

EPL/501

BS EN 62137-1-5Mechanical shear fatigue test

EPL/501

BS EN 62264:—Enterprise-control system integration

BS EN 62264-1 (Revision)Models and terminology

will supersede BS IEC 62264-1:2003

GEL/65/1

BS EN 62264-2 (Revision)Object model attributes

will supersede BS IEC 62264-2:2004

GEL/65/1

BS EN 62359 (Revision)Ultrasonics. Field characterization. Test methodsfor the determination of thermal andmechanical indices related to medical diagnosticultrasonic fields

will supersede BS EN 62359:2005

EPL/87

BS EN 62525Standard test interface language (STIL) fordigital test vector data

GEL/93

BS EN 62526Standard for extensions to standard testinterface language (STIL) for semiconductordesign environments

GEL/93

BS EN 62527Standard for extensions to standard testinterface language (STIL) for DC levelspecification

GEL/93

BS EN 62528Standard testability method for embeddedcore-based integrated circuits

GEL/93

BS EN ISO 28199-3Visual assessment of sagging, pitting, pinholingand opacity

STI/10

BS EN 50085:—Cable trunking and cable ducting systems forelectrical installations

BS EN 50085-2-3 (Revision)Particular requirements for slotted cabletrunking systems intended for installation incabinets. Slotted in cabinets

will supersede BS EN 50085-1:1999 andBS EN 50085-2-3:2001

PEL/213

BS EN 60335:—Household and similar electrical appliances.Safety

BS EN 60335-1 (Revision)General requirements

will supersede BS EN 60335-1:2002

CPL/61

BS EN 60479:—Effects of current on human beings andlivestock

BS EN 60479-5Touch voltage threshold values for physiologicaleffects

JPEL/64

BS EN 60601:—Medical electrical equipment

BS EN 60601-2-1 (Revision)Particular requirements for the safety ofelectron accelerators in the range 1 MeV to 50 MeV

will supersede BS EN 60601-2-1:1998

CH/62/3

BS EN 60601-2-25 (Revision)Particular requirements for safety. Specificationfor electrocardiographs

will supersede BS EN 60601-2-25:1996

CH/62/4

BS EN 61753:—Fibre optic interconnecting devices and passivecomponents performance standard

BS EN 61753-131-3Single mode mechanical fibre splice forcategory U. Uncontrolled environment

GEL/86/2

New Work Started continued...

46 Update Standards Aug 2007Prices may be subject to change.

Page 41: August 2007

BS ISO 14105Document management. Change management

IDT/1/2

BS ISO 14966:2002/Corrigendum 1Ambient air. Determination of numericalconcentration of inorganic fibrous particles.Scanning electron microscopy method

EH/2/3

BS ISO/IEC 15944:—Information technology. Business operationalview

BS ISO/IEC 15944-7e-Business Vocabulary

IST/40

BS ISO 16059Dentistry. Required elements for codificationused in data exchange

CH/106/3

BS ISO 16245Archives boxes and file covers for paperdocuments

IDT/2

BS ISO 16330Metallic materials. Method of hole expandingtest

ISE/NFE/4

BS ISO 16940Glass in building. Glazing and airborne soundinsulation. Measurement of the mechanicalimpedance of laminated glass

B/520/4

BS ISO 20795:—Dentistry. Base polymers

BS ISO 20795-2Orthodontic base polymers

CH/106/2

BS ISO 21563Dentistry. Hydrocolloid impression materials

CH/106/2

BS ISO/IEC 25051:2006/Corrigendum 1Software engineering. Software product qualityrequirements and evaluation (SQuaRE).Requirements for quality of commercial off-the-shelf (COTS) software product and instructionsfor testing

IST/15

BS ISO/IEC 27031:—ICT readiness for business continuity

BS ISO/IEC 27031-1Overview

IST/33

BS ISO 7867:—Tyres and rims (metric series) for agriculturaltractors and machines

BS ISO 7867-2:2005/Amendment 1Service description and load ratings

AUE/4

BS ISO 8664:2005/Amendment 1Tyres for agricultural tractors and machines.Code-designated and service-descriptionmarked radial drive-wheel tyres

AUE/4

BS ISO 8709Mopeds. Brakes and brake systems. Tests andmeasurement methods

AUE/14

BS ISO 8710Motorcycles. Brakes and brake systems. Testsand measurement methods

AUE/14

BS ISO 8902Oil of lavandin Grosso [Lavandula angustifoliaMiller x Lavandula latifolia (L.f.) Medikus],French type

AW/54

BS ISO 10235Document management. Workflowmanagement coalition. Workflow referencemodel

IDT/1/2

BS ISO 10244Document management. Businessprocess/workflow base lining and analysisstandards associated with ECM technologies

IDT/1/2

BS ISO 10255Document management. Optical disk storagetechnology, management and standards

IDT/1/2

BS ISO 10332Seamless and welded (except submerged arc-welded) steel tubes for pressure purposes.Ultrasonic testing for the verification ofhydraulic leak-tightness

ISE/73/1

BS ISO 11542:—Plastics. Ultra-high-molecular-weightpolyethylene (PE-UHMW) moulding andextrusion materials

BS EN ISO 11542-2:1999/Corrigendum 1Preparation of test specimens anddetermination of properties

PRI/82

BS ISO 12123Optics and photonics. Specification of rawoptical glass

CPW/172/3

BS ISO 1217 (Revision)Displacement compressors. Acceptance tests

will supersede BS ISO 1217:1996

MCE/8

BS ISO 3166:—Codes for the representation of names ofcountries and their subdivisions

BS ISO 3166-1:2006/Corrigendum 1Country codes

IDT/2/11

BS ISO 3630:—Dentistry. Root canal instruments

BS ISO 3630-4Auxiliary instruments

CH/106/4

BS ISO 4129Road vehicles. Mopeds. Symbols for controls,indicators and tell-tales

AUE/14

BS ISO 4251:—Tyres (ply rating marked series) and rims foragricultural tractors and machines

BS ISO 4251-1:2005/Amendment 1Tyre designation and dimensions, and approvedrim contours

AUE/4

BS ISO 4251-4Tyre classification and nomenclature

will supersede BS AU 50-1.4.3a:1992

AUE/4

BS ISO 4635Rubber, vulcanized. Preformed compressionseals for use between concrete paving sections.Specification

PRI/73

BS ISO 6209Rubber compounding ingredients. Carbonblack. Determination of solvent extractablematerial

will supersede BS 5293-16:1990

PRI/50

BS ISO 6944:—Fire resistance tests. Elements of buildingconstruction

BS ISO 6944-2Kitchen extraction ducts

will partially supersede BS 476-24:1987

FSH/22/9

Update Standards Aug 2007 Prices may be subject to change. 47

Page 42: August 2007

DD ISO/TS 11942Dentistry. Terminology. Terminological entriesuseful to dentistry and not included in ISO 1942

CH/106/3

DD ISO/TS 22595:—Dentistry. Plant area equipment

DD ISO/TS 22595-2Compressor systems

CH/106/6

PD CEN/TR 4638Change in design qualification of electricalcables

ACE/6/-/2

PD CEN/TR 15615Explanation of the general relationshipbetween various CEN standards and the EnergyPerformance of Buildings Directive (EPBD)(“Umbrella document”)

B/540

PD CEN/TR 15716Solid recovered fuels. Determination ofcombustion behaviour

PTI/17

PD 6532:—Reference materials. Guide to the contents ofcertificates of reference materials

PD 6532-1:1993/Amendment 1Guide to terms and definitions used inconnection with reference materials

RMI/1

PD 6532-3 (Revision)Guide to the uses of certified referencematerials

will supersede PD 6532-3:2000

RMI/1

PD ISO/TR 10989Categorisation of reference materials. Guidanceon, and keywords used for RM categorisation

RMI/1

PD ISO/TR 19934Information and documentation. Statistics forthe use of electronic library services

IDT/2/15

PD IEC/TR 62096 (Revision)Nuclear power plants. Instrumentation andcontrol. Guidance for the decision onmodernization

will supersede PD IEC/TR 62096:2002

NCE/8

BS ISO 28521Ships and marine technology. Hydraulic oilsystems. Guidance for grades of cleanliness andflushing

SME/32/-/3

BS ISO 28522Ships and marine technology. Hydraulic oilsystems. Guidance for assembling and flushing

SME/32/-/3

BS ISO 28523Ships and marine technology. Sampling fromlubricating oil and hydraulic oil systems.Guidance for sampling for determination ofcleanliness and solid particle contamination

SME/32/-/3

BS ISO 28560Information and documentation. Data modelfor use of radio frequency identifier (RFID) inlibraries

IDT/2/7

BS ISO/IEC 29100Information technology. Security techniques. Aprivacy framework

IST/33

BS ISO/IEC 29101Information technology. Security techniques. Aprivacy reference architecture

IST/33

BS ISO/IEC 29115Information technology. Security techniques.Authentication assurance

IST/33

BS ISO 32000Document management. Portable documentformat PDF 1.7

IDT/1/2

BS ISO GUIDE 80Reference materials. Quality control materials(QCM)

will supersede PD 6532-3:2000

RMI/1

BS IEC 62533Radiation protection instrumentation. Highlysensitive hand-held instruments for photondetection of radioactive material

NCE/2

BS IEC 62534Radiation protection instrumentation. Highlysensitive hand-held instruments for neutrondetection of radioactive material

NCE/2

DD ISO/TS 10004Quality management. Guidelines for monitoringand measuring customer satisfaction

QS/1

BS ISO/IEC 27031-2Management framework

IST/33

BS ISO/IEC 27031-3Threat monitoring and detection

IST/33

BS ISO/IEC 27031-4Vulnerability management

IST/33

BS ISO/IEC 27031-5Incident management

will supersede PD ISO/IEC TR 18044:2004

IST/33

BS ISO/IEC 27031-6Services

IST/33

BS ISO/IEC 27031-7Testing and measurement

IST/33

BS ISO/IEC 27031-8Assurance

IST/33

BS ISO/IEC 27032Information technology. Security techniques.Guidelines for cybersecurity

IST/33

BS ISO/IEC 27033:—Information technology. Security techniques.Network security

BS ISO/IEC 27033-1Guidelines for network security

will supersede BS ISO/IEC 18028-1:2006

IST/33

BS ISO/IEC 27033-2Guidelines for the design and implementationof network security

will supersede BS ISO/IEC 18028-2:2006

IST/33

BS ISO/IEC 27034Information technolgy. Security techniques.Guidelines for application security

IST/33

BS ISO 28500Information and documentation. The WARC fileformat

IDT/2/7

BS ISO 28520Ships and marine technology. Lubricating oilpipe systems. Recommended degrees ofcleaning and flushing

SME/32/-/3

New Work Started continued...

48 Update Standards Aug 2007Prices may be subject to change.

Page 43: August 2007

07/30130545 DCBS ISO 8254-1 Paper and board. Measurementof specular gloss. Part 1. 75° gloss with aconverging beam, TAPPI method

PAI/11

07/30130997 DCBS ISO 23065 Milk fat from enriched dairyproducts. Determination of omega-3 andomega-6 fatty acid content by gas-liquidchromatography

AW/5

07/30131009 DCBS ISO 22935-3 Milk and milk products.Sensory analysis. Part 3. Evaluation ofcompliance with product specifications forsensory properties by scoring

AW/5

07/30135960 DCBS EN 1712 Non-destructive testing of welds.Ultrasonic testing of welded joints. Acceptancelevels

WEE/46

07/30135963 DCBS EN 1714 Non-destructive testing of welds.Ultrasonic testing of welded joints

WEE/46

07/30138921 DCBS EN 62209-2 Human exposure to radiofrequency fields from handheld and body-mounted wireless communication devices.Human models, instrumentation, andprocedures. Part 2. Procedure to determine thespecific absorption rate (SAR) for mobilewireless communication devices used in closeproximity to the human body (frequency rangeof 30 MHz to 6 GHz)

GEL/106

Comments for the above document are required by12 September, 2007

07/30140174 DCBS 5395-1 Stairs, ladders and walkways. Part 1.Code of practice for the design, constructionand maintenance of straight stairs and winders

B/208

07/30140373 DCBS EN 12062 Non-destructive testing of welds.General rules for metallic materials

WEE/46

07/30140385 DCBS EN ISO 15011-1 Health and safety inwelding and allied processes. Laboratorymethods for sampling fume and gases. Part 1.Determination of fume emission rate during arcwelding and collection of fume for analysis

WEE/40

Comments for the above document are required by31 October, 2007

07/30043552 DCBS 5385-4 Wall and floor tiling. Part 4. Designand installation of ceramic and mosaic tiling inspecial conditions. Code of practice

B/539

Comments for the above document are required by31 August, 2007

07/30057628 DCBS ISO 80000-3 Quantities and units. Part 3.Space and time

SS/7

07/30065083 DCBS EN 60027-4 Letter symbols to be used inelectrical technology. Part 4. Rotating electricmachines

SS/7

07/30092995 DCBS EN ISO 19901-3 Petroleum and natural gasindustries. Specific requirements for offshorestructures. Part 3. Topsides structure£18.00 members, £36.00 non-members

B/525/12

07/30122297 DCBS ISO 15754 Paper and board. Determinationof z-directional tensile strength

PAI/11

Comments for the above document are required by31 October, 2007

07/30122906 DCBS IEC 61577-4 Radiation protectioninstrumentation. Radon and radon decayproduct measuring instruments. Part 4.Equipment for the production of referenceatmospheres containing radon isotopes andtheir decay products (STAR)

NCE/2

Comments for the above document are required by31 October, 2007

07/30126366 DCBS EN 80000-13 Quantities and units. Part 13.Information science and technology

SS/7

07/30126676 DCBS ISO 12637-2 Graphic technology.Vocabulary. Part 2. Prepress terms

PAI/43

07/30128138 DCBS EN 1993-1-9 National Annex to Eurocode 3.Design of steel structures. Part 1-9. Fatigue

B/525/31

07/30128140 DCBS EN 1993-1-10 National Annex to Eurocode3. Design of steel structures. Part 1-10. Materialtoughness and through thickness properties

B/525/31

07/30128330 DCBS EN 1991-1-7 National Annex to Eurocode 1.Actions on structures. Part 1-7. Accidentalactions

B/525/1

BS AU 50:—Tyres and wheels

BS AU 50-1:—Tyres

BS AU 50-1.4.8:1998/Amendment 1Agricultural tractor and machine tyres. Methodof measuring tyre rolling circumference foragricultural tractor drive wheels

AUE/4

BS AU 50-1.5.4a:1994/Amendment 1Industrial vehicle tyres. Specification for solidtyres (metric series) for pneumatic tyre rims:designation, dimensions and marking

AUE/4

PAS 24:—Enhanced security performance requirementsfor door assemblies

PAS 24-1Single and double leaf, hinged external doorassemblies to dwellings

will supersede PAS 24-1:1999

B/538/4

PAS 444Specification for commercial vehicle operators

DRAFT BRITISH STANDARDSFOR PUBLIC COMMENT

All Draft British Standards are availablefrom BSI Customer Services (see ’How toorder’ on page 2)

Most drafts are charged at£10.00 to members and£20.00 to non-members.

Larger draft documents are charged at ahigher price according to the number ofpages and are priced individually below.

Comments are welcome and should besent to Debbie Stead, Head of CommitteeService Centre – Operations,BSI HeadOffice, 389 Chiswick High Road, LondonW4 4AL by 30 September, 2007 unlessotherwise stated, to be considered by therelevant BSI committee.

Draft standards may be modified beforeadoption and issue as British Standards.

07/19984917 DCBS ISO 14659 Geometrical productspecifications (GPS). Fundamentals. Concepts,principles and rules

TDW/4

07/30016130 DCBS 5974 Code of practice for the planning,design, setting up and use of temporarilyinstalled suspended access equipment

B/514/39

Update Standards Aug 2007 Prices may be subject to change. 49

Page 44: August 2007

07/30154336 DCBS ISO 25378 Geometrical productspecifications (GPS). Specification.Characteristics and conditions

TDW/4

07/30155111 DCBS EN 15330-2 Surfaces for sports areas.Synthetic turf and needle-punched surfacesprimarily designed for outdoor use. Part 2.Specification for needle-punched surfaces

PRI/57

07/30155531 DCBS EN 60191-6-17 Mechanical standardizationof semiconductor devices. Part 6-17. Designguide for stacked packages and individualstackable packages. Fine-pitch Ball Grid Arrayand Fine-pitch Land Grid Array Packages(FBGA/FLGA)

EPL/47

Comments for the above document are required by31 August, 2007

07/30156217 DCBS ISO 366-2 Textile machinery and accessories.Reeds. Part 2. Dimensions and designation ofmetal reeds with plate baulk

TCI/33

Comments for the above document are required by31 October, 2007

07/30156220 DCBS ISO 366-3 Textile machinery and accessories.Reeds. Part 3. Dimensions and designation ofmetal reeds with double-spring baulk

TCI/33

Comments for the above document are required by31 October, 2007

07/30156322 DCBS 8495 Code of practice for digital CCTVrecording systems for the purpose of imageexport to be used as evidence

GW/1/10

07/30156974 DCBS 5268-2 AMD 1 Structural use of timber. Part 2. Code of practice for permissible stressdesign, materials and workmanship

B/525/5

07/30158043 DCBS EN 62501 Electrical testing of voltagesource converter (VSC) valves for high-voltagedirect current (HVDC) power transmission

PEL/22

Comments for the above document are required by31 October, 2007

07/30158567 DCBS EN 60512-27-100 Connectors for electronicequipment. Tests and measurements. Part 27-100. Signal integrity tests up to 500MHz on 60603-7 series connectors. Tests 27a to27g

EPL/48

Comments for the above document are required by31 August, 2007

07/30151946 DCBS EN 1713 Non-destructive testing of welds.Ultrasonic testing. Characterization ofindications in welds

WEE/46

07/30152892 DCBS EN ISO 7291 Gas welding equipment.Pressure regulars for manifold systems used inwelding, cutting and allied processes up to 300 bar

WEE/18

Comments for the above document are required by31 October, 2007

07/30153021 DCBS IEC 60204-33 Safety of machinery. Electricalequipment of machines. Part 33. Requirementsfor semiconductor fabrication equipment£18.00 members, £36.00 non-members

GEL/44

07/30153381 DCBS ISO 9644 Agricultural irrigation equipment.Pressure losses in irrigation valves. Test method

AGE/30

07/30153685 DCBS ISO 10263-1 Earth-moving machinery.Operator enclosure environment. Part 1. Termsand definitions

B/513/1

07/30153688 DCBS ISO 10263-2 Earth-moving machinery.Operator enclosure environment. Part 2. Airfilter test element method

B/513/1

07/30153691 DCBS ISO 10263-3 Earth-moving machinery.Operator enclosure environment. Part 3.Pressurization test method

B/513/1

07/30153694 DCBS ISO 10263-4 Earth-moving machinery.Operator enclosure environment. Part 4.Heating, ventilation and air conditioning(HVAC) test method and performance

B/513/1

07/30153697 DCBS ISO 10263-5 Earth-moving machinery.Operator enclosure environment. Part 5.Windscreen defrosting system test method

B/513/1

07/30153700 DCBS ISO 10263-6 Earth-moving machinery.Operator enclosure environment. Part 6.Determination of effect of solar heating

B/513/1

07/30154228 DCBS ISO 11495 Determination of palladium inpalladium jewellery alloys. ICP-solution-spectrometric method using yttrium as internalstandard element

STI/53

Comments for the above document are required by31 October, 2007

07/30142476 DCBS ISO 1871 Food products. General guidelinesfor the determination of nitrogen by Kjedahlmethod

AW/4

07/30142572 DCBS EN ISO 23210-1 Stationary source emissions.Determination of PM 10/PM 2.5 massconcentration in flue gas. Part 1. Measurementat low concentrations by use of impactors

EH/2/1

Comments for the above document are required by31 October, 2007

07/30143885 DCBS ISO 21439 Clinical dosimetry. Beta radiationsources for brachytherapy

NCE/2

Comments for the above document are required by31 October, 2007

07/30144128 DCBS EN 60300-3-15 Dependability management.Part 3-15. Guidance to engineering of systemdependability

DS/1

Comments for the above document are required by31 October, 2007

07/30146333 DCBS ISO 16000-14 Indoor air. Part 14.Determination of total (gas and particle-phase)polychlorinated dioxin- like biphenyls (PCBs)and polychlorinated dibenzo-pdioxins/dibenzofurans (PCDDs/PCDFs).Extraction, clean-up and analysis by high-resolution gas chromatography/ massspectrometry

EH/2/3

Comments for the above document are required by31 October, 2007

07/30147774 DCBS 8415 AMD1 Monuments within burialgrounds and memorial sites. Specification

B/545

07/30149327 DCBS ISO 9463 Nuclear energy. Nuclear fueltechnology. Determination of plutonium innitric acid solutions by spectrophotometry

NCE/9

07/30149330 DCBS ISO 13465 Nuclear energy. Nuclear fueltechnology. Determination of neptunium innitric acid solutions by spectrophotometry

NCE/9

07/30149682 DCBS 7907 Code of practice for the design andmanufacture of children’s clothing to promotemechanical safety

TCI/66

07/30151457 DCBS ISO 25620 Laminate floor coverings.Determination of long-side friction formechanically assembled panels

PRI/60

Comments for the above document are required by31 October, 2007

Draft British Standards for Public Comment continued...

50 Update Standards Aug 2007Prices may be subject to change.

Page 45: August 2007

07/30165249 DCBS EN 15154-3 Emergency safety showers. Part 3. Non plumbed-in body showers

LBI/18

07/30165257 DCBS EN 1429 Bitumen and bituminous binders.Determination of residue on sieving of bitumenemulsions, and determination of storage abilityby sieving

PTI/13

07/30165260 DCBS EN 1430 Bitumen and bituminous binders.Determination of particle polarity of bitumenemulsions

PTI/13

07/30165263 DCBS EN 1431 Bitumen and bituminous binders.Determination of recovered binder and oildistillate from bitumen emulsions by distillation

PTI/13

07/30165568 DCBS EN 448 District heating pipes. Preinsulatedbonded pipe systems for directly buried hotwater networks. Fitting assemblies of steelservice pipes, polyurethane thermal insulationand outer casing of polyethylene

RHE/9

Comments for the above document are required by31 October, 2007

07/30165591 DCBS EN 15689 Railway applications. Track.Switches and crossings. Cast austeniticmanganese steel for crossing components

RAE/2/-/3

Comments for the above document are required by31 October, 2007

07/30165766 DCBS EN 15698-1 District heating pipes.Preinsulated bonded twin pipe systems fordirectly buried hot water networks. Part 1. Twinpipe assembly of steel service pipe,polyurethane thermal insulation and outercasing of polyethylene

RHE/9

Comments for the above document are required by31 October, 2007

07/30165869 DCBS ISO/IEC 18000-1 Information technology.Radio frequency identification for itemmanagement. Part 1. Reference architectureand definition of parameters to bestandardized

IST/34

07/30166061 DCBS EN 15702 Cellular plastics. Cell countprocedure

PRI/24

Comments for the above document are required by31 October, 2007

07/30163689 DCBS EN 1439 LPG equipment and accessories.Procedure for checking LPG cylinders before,during and after filling

PVE/19

Comments for the above document are required by31 October, 2007

07/30164228 DCBS EN 15691 Ethanol as a blending componentfor petrol. Determination of total dry residue(involatile material). Gravimetric method

PTI/2

07/30164611 DCBS EN 15651-2 Sealants for joints in buildingconstruction. Definitions, requirements andevaluation of conformity. Part 2. Sealants forglazing

B/547

07/30164614 DCBS EN 15546-2 Small bore connectors forliquids and gases in healthcare applications.Part 2. Connectors for respiratory applications

CH/84/-/1

07/30164617 DCBS EN 10152 Electrolytically zinc coated coldrolled steel flat products for cold forming.Technical delivery conditions

ISE/10

07/30164625 DCBS EN 1332-1 Identification card systems.Human-machine interface. Part 1. Designprinciples for the user interface

IST/17

07/30164802 DCBS EN 10346 Continuously hot-dip coated steelflat products. Technical delivery conditions

ISE/10

07/30164812 DCBS EN 581-2 Outdoor furniture. Seating andtables for camping, domestic and contract use.Part 2. Mechanical safety requirements and testmethods for seating

FW/0

07/30164816 DCBS EN 15694 Agricultural tractors. Passengerseat. Requirements and test procedures

AGE/6

07/30164820 DCBS EN 15695-1 Agricultural tractors and self-propelled machinery. Protection againsthazardous substances. Part 1. Cab classification,requirements and test procedures

AGE/6

07/30164823 DCBS EN 15695-2 Agricultural tractors and self-propelled machinery. Protection againsthazardous substances. Part 2. Air purifyingdevices

AGE/6

07/30161984 DCBS ISO 13457 Agricultural irrigationequipment. Water-driven chemical injectorpumps

AGE/30

07/30162058 DCBS ISO 3290-1 Rolling bearing. Rollingelements. Part 1. Steel balls

MCE/7

Comments for the above document are required by19 October, 2007

07/30163153 DCBS EN 60633 AMD1 Terminology for high-voltage direct current (HVDC) transmission

PEL/22

Comments for the above document are required by31 October, 2007

07/30163397 DCBS 1192 Collaborative production ofarchitectural, engineering and, constructioninformation. Code of practice

B/555

Comments for the above document are required by31 August, 2007

07/30163407 DCBS ISO 7240-28 Fire detection and alarmsystems. Part 28. Fire protection controlequipment

FSH/12/4

Comments for the above document are required by31 October, 2007

07/30163410 DCBS ISO 648 Laboratory glassware. Singlevolume pipettes

LBI/36/1

07/30163658 DCBS EN 621 Non-domestic gas-fired forcedconvection air heaters for space heating notexceeding a net heat input of 300 kW, withouta fan to assist transportation of combustion airand/or combustion products£18.00 members, £36.00 non-members

GSE/20

07/30163662 DCBS EN 778 Domestic gas-fired forcedconvection air heaters for space heating notexceeding a net heat input of 70 kW, without afan to assist transportation of combustion airand/or combustion products£18.00 members, £36.00 non-members

GSE/20

07/30163686 DCBS EN 1440 LPG equipment and accessories.Periodic inspection of transportable refillableLPG cylinders

PVE/19

Comments for the above document are required by31 October, 2007

Update Standards Aug 2007 Prices may be subject to change. 51

Page 46: August 2007

07/30167574 DCBS EN 4645-005 Aerospace series. Connectors,optical, circular, single and multipin, coupled bythreaded ring, 1,25 mm dia. Ferrule withremovable alignment sleeve holder. Part 005.Plug. Product standard

ACE/6/-/3

07/30167591 DCBS 10621 Thief resistant dual-mode lockassemblies

B/538/4

07/30167610 DCBS EN 15696 Self storage. Specification for selfstorage services

SVS/7/3

07/30167615 DCBS EN 61753-086-2 Fibre optic interconnectingdevices and passive components performancestandard. Part 086-2. Non-connectorised single-mode bidirectional 1490/1550-nm downstream1310-nm upstream WWDM devices for categoryC. Controlled environment

GEL/86/2

07/30167689 DCBS EN 50085-2-4 Cable trunking systems andcable ducting systems for electrical installations.Part 2-4. Particular requirements for servicepoles

PEL/213

Comments for the above document are required by31 October, 2007

07/30167762 DCBS ISO/IEC 14443-4 Identification cards.Contactless integrated circuit(s) cards. Proximitycards. Part 4. Transmission protocol

IST/17

07/30167774 DCBS EN ISO 15085 AMD1 Small craft. Man-overboard prevention and recovery

GME/33

07/30167778 DCBS ISO 11155-2 Road vehicles. Air filters forpassenger compartments. Part 2. Test forgaseous filtration

MCE/21/2

07/30167795 DCBS ISO/IEC 10779 Office equipmentaccessibility guidelines for elderly persons andpersons with disabilities

IST/3

07/30167907 DCBS 7752-1 AMD1 Free running type wirethread inserts. Part 1. Specification forISO metric coarse pitch threads

FME/9

07/30167926 DCBS ISO 9076-1 Thermal insulation. Mineral-wool loose-fill for horizonal applications inventilated roof spaces. Part 1. Materialspecification and test methods

B/540/8

07/30167448 DCBS EN 60079-13 Explosive atmospheres. Part 13. Equipment protection by pressurizedroom “p”

GEL/31

07/30167467 DCBS EN ISO 27874 Metallic coatings.Electrodeposited gold and gold alloy coatingsfor electrical, electronic and engineeringpurposes. Specification and test methods

STI/33

07/30167498 DCBS EN 61822 Electrical installations for lightingand beaconing of aerodromes. Constant currentregulators

EPL/97

Comments for the above document are required by14 August, 2007

07/30167505 DCBS ISO/IEC 15408-1 Information technology.Security techniques. Evaluation criteria for ITsecurity. Part 1. Introduction and general model

IST/33

07/30167508 DCBS ISO/IEC 11770-2 Information technology.Security techniques. Key management. Part 2.Mechanisms using symmetric techniques

IST/33

07/30167562 DCBS EN 4645-001 Aerospace series. Connectors,optical, circular, single and multipin, coupled bythreaded ring, 1,25 mm dia. Ferrule withremovable alignment sleeve holder. Part 001.Technical specification

ACE/6/-/3

07/30167565 DCBS EN 4645-002 Aerospace series. Connectors,optical, circular, single and multipin, coupled bythreaded ring, 1,25 mm dia. Ferrule withremovable alignment sleeve holder. Part 002.Specification of performance and contactarrangements

ACE/6/-/3

07/30167568 DCBS EN 4645-003 Aerospace series. Connectors,optical, circular, single and multipin, coupled bythreaded ring, 1,25 mm dia. Ferrule withremovable alignment sleeve holder. Part 003.Square flange receptacle. Product standard

ACE/6/-/3

07/30167571 DCBS EN 4645-004 Aerospace series. Connectors,optical, circular, single and multipin, coupled bythreaded ring, 1,25 mm dia. Ferrule withremovable alignment sleeve holder. Part 004.Jam nut receptacle. Product standard

ACE/6/-/3

07/30166242 DCBS ISO/IEC 27011 Information technology.Security techniques. Information securitymanagement guidelines fortelecommunications

IST/33

Comments for the above document are required by15 September, 2007

07/30166426 DCBS EN 10349 Steel castings. Austeniticmanganese steel castings

ISE/6

Comments for the above document are required by31 October, 2007

07/30166815 DCBS EN 60068-2-65 AMD1 Environmentaltesting. Part 2-65. Methods of test. Test Fg.Vibration, acoustically induced

GEL/104

07/30167265 DCBS ISO 26304 Welding consumables. Solid wireelectrodes, tubular cored electrodes andelectrode-flux combinations for submerged arcwelding of high strength steels. Classification

WEE/39

07/30167307 DCBS EN 60335-2-17 AMD2 Household andsimilar electrical appliances. Safety. Part 2-17.Particular requirements for blankets, pads andsimilar flexible heating appliances

CPL/61/07

07/30167315 DCBS EN 60335-2-51 AMD1 Household andsimilar electrical appliances. Safety. Part 2-51.Particular requirements for stationarycirculation pumps for heating and service waterinstallations

CPL/61/01

07/30167371 DCBS ISO 2080 Metallic and other inorganiccoatings. Surface treatment, metallic and otherinorganic coatings. Vocabulary

STI/33

07/30167396 DCBS EN 61869-4 Instrument transformers. Part 4.Specific requirement for combined transformers

PEL/38

07/30167410 DCBS EN 60745-1 AMD Hand-held motor-operated electric tools. Safety. Part 1. Generalrequirements

CPL/61/6

07/30167441 DCBS ISO 15752 Ophthalmic instruments.Endoilluminators. Fundamental requirementsand test methods for optical radiation safety

CH/172

Draft British Standards for Public Comment continued...

52 Update Standards Aug 2007Prices may be subject to change.

Page 47: August 2007

07/30168177 DCBS EN 61300-2-1 Fibre optic interconnectingdevices and passive components. Basic test andmeasurement procedures. Part 2-1. Tests.Vibration (sinusoidal)

GEL/86/2

Comments for the above document are required by31 October, 2007

07/30168181 DCBS EN 61300-2-2 Fibre optic interconnectingdevices and passive components. Basic test andmeasurement procedures. Part 2-2. Tests.Mating durability

GEL/86/2

Comments for the above document are required by31 October, 2007

07/30168187 DCBS EN 61300-2-5 Fibre optic interconnectingdevices and passive components. Basic test andmeasurement procedures. Part 2-5. Tests.Torsion/Twist

GEL/86/2

Comments for the above document are required by31 October, 2007

07/30168199 DCBS EN ISO 18332 Metallic and other inorganiccoatings. Definitions and conventionsconcerning porosity

STI/33

07/30168214 DCBS ISO/IEC 25012 Software engineering.Software product Quality Requirements andEvaluation (SQuaRE). Data Quality Model

IST/15

07/30168223 DCBS IEC 80601-2-59 Medical electricalequipment. Part 2-59. Particular requirementsfor basic safety and essential performance ofscreening thermographs for human febriletemperature screening

CH/62/4

Comments for the above document are required by31 October, 2007

07/30168230 DCBS EN 62257-9-1 Recommendations for smallrenewable energy and hybrid systems for ruralelectrification. Part 9-1. Micropower systems

GEL/82

Comments for the above document are required by31 October, 2007

07/30168266 DCBS ISO 27830 Metallic and other inorganiccoatings. Standard guide for specifying suchcoatings

STI/33

Comments for the above document are required by31 October, 2007

07/30168045 DCBS ISO 26622-2 Modular taper interface withball track system. Part 2. Dimensions anddesignation of receivers

MTE/15

07/30168048 DCBS ISO 26623-1 Polygonal taper interface withflange contact surface. Part 1. Dimensions anddesignation of shanks

MTE/15

07/30168051 DCBS ISO 26623-2 Polygonal taper interface withflange contact surface. Part 2. Dimensions anddesignation of receivers

MTE/15

07/30168055 DCBS EN ISO 6327 Gas analysis. Determination ofthe water dew point of natural gas. Cooledsurface condensation hygrometers

PTI/15

Comments for the above document are required by2 November, 2007

07/30168062 DCBS EN 50402 AMD1 Electrical apparatus forthe detection and measurement of combustibleor toxic gases or vapours or of oxygen.Requirements on the functional safety of fixedgas detection systems

GEL/31/19

Comments for the above document are required by23 September, 2007

07/30168153 DCBS EN 60875-1 Non-wavelength-selective fibreoptic branching devices. Part 1. Genericspecification

GEL/86/2

Comments for the above document are required by31 October, 2007

07/30168157 DCBS ISO/IEC 15909-2 Software and systemsengineering. High-level petri nets. Part 2.Transfer format

IST/15

Comments for the above document are required by31 October, 2007

07/30168160 DCBS ISO/IEC 24773 Software engineering.Certification of software engineeringprofessionals. Comparison framework

IST/15

Comments for the above document are required by31 October, 2007

07/30167930 DCBS ISO 9076-2 Thermal insulation. Mineral-wool loose-fill for horizontal applications inventilated roof spaces. Part 2. Principleresponsibilities of installers

B/540/8

07/30167946 DCBS EN 60099-4 AMD2 Surge arresters. Part 4.Metal-oxide surge arresters without gaps forA.C. systems

PEL/37

07/30167951 DCBS EN 60076-1 Power transformers. Part 1.General

PEL/14

07/30167960 DCBS EN 60191-6 Mechanical standardization ofsemiconductor devices. Part 6. General rules forthe preparation of outline drawings of surfacemounted semiconductor device packages

EPL/47

Comments for the above document are required by31 August, 2007

07/30167970 DCBS EN 61000-5-9 Electromagnetic compatibility(EMC). Part 5-9. Installation and mitigationguidelines. System-level susceptibilityassessments for HEMP and HPEM

GEL/210/12

07/30168000 DCBS EN 60700-1 AMD2 Thyristor valves for high-voltage direct current (HVDC) transmission. Part 1. Electrical testing

PEL/22

07/30168004 DCBS EN 61000-4-35 Electromagneticcompatibility (EMC). Part 4-35. Testing andmeasurement techniques. High powerelectromagnetic (HPEM) simulator compendium

GEL/210/12

07/30168014 DCBS EN 60730-2-12 AMD1 Automatic electricalcontrols for household and similar use. Part 2-12. Particular requirements forelectrically operated door locks

CPL/72

07/30168025 DCBS EN 61747-5-2 Liquid crystal display devices.Part 5-2. Visual inspection of active matrixcolour liquid crystal display modules

EPL/47

Comments for the above document are required by28 August, 2007

07/30168042 DCBS ISO 26622-1 Modular taper interface withball track system. Part 1. Dimensions anddesignation of shanks

MTE/15

Update Standards Aug 2007 Prices may be subject to change. 53

Page 48: August 2007

07/30168606 DCBS ISO 11073-91064 Health informatics. Point-of-care medical device communication. Part91064. Standard communication protocol.Computer-assisted electrocardiography£18.00 members, £36.00 non-members

IST/35

Comments for the above document are required by31 October, 2007

07/30168609 DCBS ISO 28722 Vitreous and porcelain enamels.Characteristics of the enamel coatings appliedto steel panels intended for architecture

STI/33

Comments for the above document are required by31 October, 2007

DOCUMENTS NOT ISSUEDAS DPCs

Comments can be sent by email or bypost to named contacts at:–BSI Head Office389 Chiswick High RoadLondon W4 4ALTel: 020 8996 9000

BS EN ISO 6579:2002/Amendment 1Microbiology of food and animal feeding stuffs.Horizontal method for the detection ofSalmonella spp.

This standard is now being issued as a jointEN ISO standard and will becomeBS EN ISO 6579:2002/Amendment 1 onpublication in the UK.Contact: Sara AnsariEmail: [email protected]

AW/12

BS EN 60976Medical electrical equipment. Medical electronaccelerators. Functional performancecharacteristics

When published this standard will supersedeBS EN 60976:2001. Copies of the text areavailable from the Programme Manager(below).Contact: Philippa YounasEmail: [email protected]

CH/62/3

EN 60745:—Hand-held motor-operated electric tools. Safety

EN 60745-2-9:2003/Amendment 11Particular requirements for tappers

07/30168488 DCBS EN 253 District heating pipes. Preinsulatedbonded pipe systems for directly buried hotwater networks. Pipe assembly of steel servicepipe, polyurethane thermal insulation andouter casing of polyethylene

RHE/9

Comments for the above document are required by31 October, 2007

07/30168545 DCBS ISO 29042-1 Safety of machinery.Evaluation of the emission of airbornehazardous substances. Part 1. Selection of testmethods

MCE/3

Comments for the above document are required by31 October, 2007

07/30168547 DCBS ISO 29042-2 Safety of machinery.Evaluation of the emission of airbornehazardous substances. Part 2. Tracer gas methodfor the measurement of the emission rate of agiven pollutant

MCE/3

Comments for the above document are required by31 October, 2007

07/30168549 DCBS ISO 29042-3 Safety of machinery.Evaluation of the emission of airbornehazardous substances. Part 3. Test benchmethod for the measurement of the emissionrate of a given pollutant

MCE/3

Comments for the above document are required by31 October, 2007

07/30168551 DCBS ISO 29042-4 Safety of machinery.Evaluation of the emission of airbornehazardous substances. Part 4. Tracer method forthe measurement of the capture efficiency ofan exhaust system

MCE/3

Comments for the above document are required by31 October, 2007

07/30168571 DCBS 8204-6 Screeds, bases and in situ floorings.Part 6. Synthetic resin floorings. Code ofpractice

B/507/6

07/30168572 DCBS IEC 61010-1 Safety requirements forelectrical equipment for measurement, control,and laboratory use. Part 1. Generalrequirements£18.00 members, £36.00 non-members

EPL/66

Comments for the above document are required by31 October, 2007

07/30168298 DCBS EN 61300-2-48 Fibre optic interconnectingdevices and passive components. Basic test andmeasurement procedures. Part 2-48. Tests.Temperature-humidity cycling

GEL/86/2

Comments for the above document are required by31 October, 2007

07/30168378 DCBS EN 50289-4-16 Communication cables.Specifications for test methods. Part 4-16.Environmental test methods. Circuit integrityunder fire conditions

EPL/46

Comments for the above document are required by31 October, 2007

07/30168422 DCBS EN 61850-8-1 Communication networks andsystems for power utility automation. Part 8-1.Specific Communication Service Mapping(SCSM). Mappings to MMS (ISO 9506-1 andISO 9506-2) and to ISO/IEC 8802-3£18.00 members, £36.00 non-members

PEL/57

Comments for the above document are required by31 August, 2007

07/30168458 DCBS EN 60255-151 Measuring relays andprotection equipment. Part 151. Functionalstandard for over/under current protection

PEL/95

Comments for the above document are required by31 August, 2007

07/30168467 DCBS ISO 1920-9 Testing of concrete. Part 9.Determination of creep of concrete cylinders incompression

B/517/1

Comments for the above document are required by31 October, 2007

07/30168470 DCBS ISO 1920-8 Testing of concrete. Part 8.Determination of the drying shrinkage ofconcrete for samples prepared in the field or inthe laboratory

B/517/1

Comments for the above document are required by31 October, 2007

07/30168484 DCBS EN 60749-20 Semiconductor devices.Mechanical and climatic test methods. Part 20.Resistance of plastic encapsulated SMDs to thecombined effect of moisture and soldering heat

EPL/47

Comments for the above document are required by31 October, 2007

Draft British Standards for Public Comment continued...

54 Update Standards Aug 2007Prices may be subject to change.

Page 49: August 2007

prEN ISO 5495Sensory analysis. Methodology. Pairedcomparison test

This standard is now being issued as a jointEN ISO standard and will becomeBS EN ISO 5495 on publication in the UK.Contact: Sara AnsariEmail: [email protected]

AW/12

prEN ISO 22005Traceability in the feed and food chain. Generalprinciples and basic requirements for systemdesign and implementation

This standard is being issued as a jointEN ISO standard and will becomeBS EN ISO 22005 on publication in the UK.Contact: Sara AnsariEmail: [email protected]

AW/90

prCEN/TS 15699Health informatics. Clinical knowledgeresources. Metadata

A copy of the above document is available fromthe contact point (below).Contact: Committee Service CentreEmail: [email protected]

IST/35

CEN/CENELEC UNIQUEACCEPTANCE PROCEDURE

Comments can be sent by email or bypost to named contacts at:–BSI Head Office389 Chiswick High RoadLondon W4 4ALTel: 020 8996 9000

EN ISO 21415:—Wheat and wheat flour. Gluten content

EN ISO 21415-2Determination of wet gluten by mechanicalmeans

Copies are available from the contact point(below).Contact: Committee Service CentreEmail: [email protected]

AW/4

prEN 196:—Methods of testing cement

prEN 196-7Methods of taking and preparing samples ofcement

This standard has been revised to take accountof the comments. A copy of the draft isavailable on request under document referenceB/516/12. Closing date for comments is 31 August, 2007.Contact: Anita AttraEmail: [email protected]

B/516/12

IEC 62531Standard for property specification language(PSL)

IEC have agreed to Fast Track the following IEEEdocuments at FDIS stage:

IEEE 450-1999, IEEE 1450.1-2005, IEEE 1450.2-2002, IEEE 1500-2005, IEEE 1641-2004, IEEE1800-2005 and IEEE 1850-2005.

Copies of the above documents are availablefrom the contact point (below).Contact: Committee Service CentreEmail: [email protected]

GEL/93

ISO 4698Iron ore pellets for blast furnace feedstocks.Determination of the free-swelling index

The above document has been circulated atFDIS stage. Copies of the text are available onrequest from the contact point (below).Contact: Committee Service CentreEmail: [email protected]

ISE/58

ISO/IEC 23000:—Information technology. Multimedia applicationformat (MPEG-A)

ISO/IEC 23000-9Multimedia Application Format for DigitalMultimedia Broadcasting

This standard has been circulated toISO members as a final committee draft byISO/IEC JTC 1/SC 29. Copies of the text areavailable from the Programme Manager(below). Comments should be made by 20 September, 2007.Contact: Jean StrideEmail: [email protected]

IST/37

ISO/IEC 23002:—Information technology. MPEG videotechnologies

ISO/IEC 23002-1:2006/Amendment 1Accuracy requirements for implementation ofinteger-output 8x8 inverse discrete cosinetransform

This standard has been circulated toISO members as a final committee draft byISO/IEC JTC 1/SC 29. Copies of the text areavailable from the Programme Manager(below). Comments should be made by 20 September, 2007.Contact: Jean StrideEmail: [email protected]

IST/37

prEN ISO 4120Sensory analysis. Methodology. Triangle test

Please note, a new edition of ISO 4120 is to beissued as an EN standard. Copies are availablefrom the Programme Manager (below).Contact: Sara AnsariEmail: [email protected]

AW/12

EN 60745-2-18:2004/Amendment 11Particular requirements for strapping tools

These amendments to sub-clause 6.2 have beenpublished by CENELEC in order to comply withthe requirements of the Physical AgentsDirective Vibration 2002/44/EC.Contact: Geraldine SaltEmail: [email protected]

CPL/61/6

IEC 60092:—Electrical installations in ships

IEC 60092-501Special features. Electric propulsion plant

A copy of the above document is available fromthe Programme Manager (below).Contact: Debbie SteadEmail: [email protected]

JPEL/18

IEC 60335:—Household and similar electrical appliances.Safety

IEC 60335-2-47:2002/Amendment 1Particular requirements for commercial electricboiling pans

The above draft amendment has been issued asan FDIS. Copies of the document are availablefrom the Programme Manager (below).Contact: Geraldine SaltEmail: [email protected]

CPL/61/5

IEC 62525Standard test interface language (STIL) fordigital test vector data

IEC 62527Standard for extensions to standard testinterface language (STIL) for semiconductordesign environments

IEC 62527Standard for extensions to standard testinterface language (STIL) for DC levelspecification

IEC 62528Standard testability method for embeddedcore-based integrated circuits

IEC 62529Standard for signal and test definition

IEC 62530Standard for system verilog: Unified hardwaredesign, specification and verification language

Update Standards Aug 2007 Prices may be subject to change. 55

Page 50: August 2007

EN 859:2007Safety of woodworking machines. Hand fedsurface planing machines

MTE/23

EN 861:2007Safety of woodworking machines. Surfaceplaning and thicknessing machines

MTE/23

EN 959:2007Mountaineering. Rock anchors. Safetyrequirements and test methods

SW/136/5

EN 1330:—Non-destructive testing. Terminology

EN 1330-11:2007Terms used in X-ray diffraction frompolycrystalline and amorphous materials

WEE/46

EN 1506:2007Ventilation for buildings. Sheet metal air ductsand fittings with circular cross-section.Dimensions

RHE/2

EN 1895:—Adhesives for paper and board, packaging anddisposable sanitary products. 180°. “T” peel testfor a flexible-to-flexible assembly

CORRIGENDUM 1:June 2007

to EN 1895:2001PRI/52

EN 3059:2007Aerospace series. Bearings, airframe rolling.Rigid single row ball bearings in steel withflanged alignment housing, cadmium plated.Dimensions and loads

MCE/7

EN 3060:2007Aerospace series. Bearings, airframe rolling.Rigid single row ball bearings in steel, cadmiumplated, with flanged alignment housing,cadmium plated. Dimensions and loads

MCE/7

EN 3061:2007Aerospace series. Bearings, airframe rolling.Rigid single row ball bearings in corrosionresisting steel, with flanged alignment bush.Dimensions and loads

MCE/7

EN 3746:2007Aerospace series. O-rings, in fluorosiliconrubber (FVMQ). Hardness 80 IRHD

ACE/12

prCEN ISO TR 24094Analysis of natural gas. Validation methods forgaseous reference materials

This technical report will be issued as aBS CEN ISO TR in 2007.Contact: Sara AnsariEmail: [email protected]

PTI/15

CEN EUROPEANSTANDARDS

EUROPEAN RATIFIED TEXTS

NOTE: SEE ALSO ENs LISTED UNDER THEETSI SECTION IN THIS ISSUE OF UPDATESTANDARDS FOR TELECOMMUNICATIONEUROPEAN STANDARDS

The documents listed below have recentlybeen issued by CEN but have not yet beenpublished as BS ENs. BSI has an obligationto adopt all ENs and to withdraw anyconflicting British Standards (BSs) or partsof BSs. The following will beimplemented as BS ENs or as amendmentsto BS ENs shortly. Notification of theirimplementation will be given in theBS EN Publications section of the relevantedition of Update Standards.

EN 71:—Safety of toys

EN 71-9:—Organic chemical compounds. Requirements

AMENDMENT 1:July 2007

to EN 71-9:2005CW/15

EN 197:—Cement

EN 197-1:—Composition, specifications and conformitycriteria for common cements

AMENDMENT 3:July 2007

to EN 197-1:2000B/516

EN 568:2007Mountaineering equipment. Ice anchors. Safetyrequirements and test methods

SW/136/5

EN 853:—Rubber hoses and hose assemblies. Wire braidreinforced hydraulic type. Specification

CORRIGENDUM 1:June 2007

to EN 853:1996PRI/66

prEN 934:—Admixtures for concrete, mortar and grout

prEN 934-1Common requirements

This standard has been revised to take accountof the comments. A copy of the draft isavailable on request under document referenceB/517/3. Closing date for comments is 31 August, 2007.Contact: Anita AttraEmail: [email protected]

B/517/3

prEN 993:—Methods of test for dense shaped refractoryproducts

prEN 993-11Determination of resistance to thermal shock

Copies are available on request from thecontact point (below).Contact: Committee Service CentreEmail: [email protected]

RPI/1

prEN ISO 19128Geographic information. Web map serverinterface

BSI has already implemented ISO 19128:2005 asBS ISO 19128:2005, and supports thetransposition of ISO 19128:2005 asEN ISO 19128.Contact: David JowersEmail: [email protected]

IST/36

prEN 62264:—Enterprise-control system integration

prEN 62264-1Models and terminology

CEN is adopting the IEC 62264-1:2003 text withan additional annex on the normativereferences. A copy of the draft is available onrequest under document reference GEL/65.Closing date for comments is 12 October, 2007Contact: Anita AttraEmail: [email protected]

GEL/65

prEN 62264-2Object model attributes

CEN is adopting the IEC 62264-2:2005 text withan additional annex on the normativereferences. A copy of the draft is available onrequest under document reference GEL/65.Closing date for comments is 12 October, 2007Contact: Anita AttraEmail: [email protected]

GEL/65

CEN/CENELEC Unique Acceptance Procedure continued...

56 Update Standards Aug 2007Prices may be subject to change.

Page 51: August 2007

EN 12697-17:—Particle loss of porous asphalt specimen

AMENDMENT 1:July 2007

to EN 12697-17:2004B/510/1

EN 12697-19:—Permeability of specimen

AMENDMENT 1:July 2007

to EN 12697-19:2004B/510/1

EN 12697-22:—Wheel tracking

AMENDMENT 1:July 2007

to EN 12697-22:2003B/510/1

EN 12697-24:—Resistance to fatigue

AMENDMENT 1:July 2007

to EN 12697-24:2004B/510/1

EN 12697-30:—Specimen preparation by impact compactor

AMENDMENT 1:July 2007

to EN 12697-30:2004B/510/1

EN 12697-32:—Laboratory compaction of bituminous mixturesby vibratory compactor

AMENDMENT 1:July 2007

to EN 12697-32:2003B/510/1

EN 12697-33:—Specimen prepared by roller compactor

AMENDMENT 1:July 2007

to EN 12697-33:2003B/510/1

EN 12697-34:—Marshall test

AMENDMENT 1:July 2007

to EN 12697-34:2004B/510/1

EN 12697-35:—Laboratory mixing

AMENDMENT 1:July 2007

to EN 12697-35:2004B/510/1

EN 12952:—Water-tube boilers

EN 12952-11:2007Requirements for control and limiting devicesand safety circuits

PVE/2

EN 4531-003:2007Square flange receptacle. Product standard

ACE/6/-/3

EN 4531-004:2007Jam nut receptacle. Product standard

ACE/6/-/3

EN 4531-005:2007Plug. Product standard

ACE/6/-/3

EN 4531-101:2007Optical contact for EN C2\10\A cable. 55° to125°. Product standard

ACE/6/-/3

EN 12416:—Fixed firefighting systems. Powder systems

EN 12416-1:—Requirements and test methods for components

AMENDMENT 2:June 2007

to EN 12416-1:2001FSH/18/8

EN 12416-2:—Design, construction and maintenance

AMENDMENT 1:June 2007

to EN 12416-2:2001FSH/18/8

EN 12697:—Bituminous mixtures. Test method for hot mixasphalt

EN 12697-2:—Determination of particle size distribution

AMENDMENT 1:July 2007

to EN 12697-2:2002B/510/1

EN 12697-5:—Determination of the maximum density

AMENDMENT 1:July 2007

to EN 12697-5:2002B/510/1

EN 12697-6:—Determination of bulk density of bituminousspecimens

AMENDMENT 1:July 2007

to EN 12697-6:2003B/510/1

EN 3747:2007Aerospace series. O-rings, in fluorosiliconrubber (FVMQ). Technical specification

ACE/12

EN 4033:2007Aerospace series. Bearings, airframe rolling.Rigid single row ball bearings in corrosionresisting steel. Diameter series 8 and 9, reducedinternal radial clearance. Dimensions and loads

MCE/7

EN 4034:2007Aerospace series. Bearings, airframe rolling.Double row self-aligning ball bearings withflanged outer ring in corrosion resisting steel,reduced internal radial clearance. Dimensionsand loads

MCE/7

EN 4421:2007Aerospace series. Studs, in titanium alloy TI-P64001, MoS2 coated, with serrated lockingring in corrosion resisting steel Strength class: 1100 MPa (at ambient temperature)

ACE/12

EN 4461:2007Aerospace series. Steel FE-PM1506(X5CrNiMoAlTi13.8.2). Vacuum induction meltedand consumable electrode remelted. Solutiontreated and precipitation hardened Bar a or D = 150 mm Rm = 1200 Mpa

ACE/61/-/15

EN 4462:2007Aerospace series. Steel FE-PM1506(X5CrNiMoAlTi13.8.2). Vacuum induction meltedand consumable electrode remelted. Solutiontreated and precipitation hardened Bar a or D = 150 mm Rm = 1300 Mpa

ACE/61/-/15

EN 4463:2007Aerospace series. Steel FE-PM1506(X5CrNiMoAlTi13.8.2). Vacuum induction meltedand consumable electrode remelted. Solutiontreated and precipitation hardened Bar a or D = 150 mm Rm = 1400 Mpa

ACE/61/-/15

EN 4531:—Aerospace series. Connectors, optical, circular,single and multipin, coupled by threaded ring.Flush contacts

EN 4531-001:2007Technical specification

ACE/6/-/3

EN 4531-002:2007Specification of performance and contactarrangements

ACE/6/-/3

Update Standards Aug 2007 Prices may be subject to change. 57

Page 52: August 2007

EN 13977:—Railway applications. Track. Safety requirementsfor portable machines and trolleys forconstruction and maintenance

AMENDMENT 1:July 2007

to EN 13977:2005RAE/2

EN 14120:—Protective clothing. Wrist, palm, knee andelbow protectors for users of roller sportsequipment. Requirements and test methods

AMENDMENT 1:June 2007

to EN 14120:2003PH/3/9

EN 14543:—Specification for dedicated liquefied petroleumgas appliances. Parasol patio heaters. Fluelessradiant heaters for outdoor or amply ventilatedarea use

AMENDMENT 1:June 2007

to EN 14543:2005GSE/24

EN 14591-4:2007Automatic extinguishing systems for roadheaders

FSH/23

EN 14652:—Water conditioning equipment inside buildings.Membrane separation devices. Requirementsfor performance, safety and testing

AMENDMENT 1:June 2007

to EN 14652:2005B/504

EN 14743:—Water conditioning equipment inside buildings.Softeners. Requirements for performance,safety and testing

AMENDMENT 1:June 2007

to EN 14743:2005B/504

EN 14812:—Water conditioning equipment inside buildings.Chemical dosing systems. Pre-set dosingsystems. Requirements for performance, safetyand testing

AMENDMENT 1:June 2007

to EN 14812:2005B/504

EN 13445:—Unfired pressure vessels

EN 13445-1:—General

AMENDMENT 1:June 2007

to EN 13445-1:2002PVE/1

EN 13445-2:—Materials

AMENDMENT 1:June 2007

to EN 13445-2:2002B/553

EN 13445-3:—Design

AMENDMENT 1:June 2007

to EN 13445-3:2002PVE/1

EN 13445-5:—Inspection and testing

AMENDMENT 1:June 2007

to EN 13445-5:2002B/553

EN 13546:—Protective clothing. Hand, arm, chest, abdomen,leg, foot and genital protectors for field hockeygoal keepers, and shin protectors for fieldhockey players. Requirements and test methods

AMENDMENT 1:June 2007

to EN 13546:2002PH/3/9

EN 13567:—Protective clothing. Hand, arm, chest, abdomen,leg, genital and face protectors for fencers.Requirements and test methods

AMENDMENT 1:June 2007

to EN 13567:2002PH/3/9

EN 13712:2007Postal services. Forms. Harmonised vocabulary

SVS/4

EN 13940:—Health informatics. System of concepts tosupport continuity of care

EN 13940-1:2007Basic concepts

IST/35

EN 13948:2007Flexible sheets for waterproofing. Bitumen,plastic and rubber sheets for roofwaterproofing. Determination of resistance toroot penetration

B/546/2

EN 12953:—Shell boilers

EN 12953-9:2007Requirements for limiting devices of the boilerand accessories

PVE/2

EN 12960:—Adhesives for paper and board, packaging anddisposable sanitary products. Determination ofshear resistance

CORRIGENDUM 1:June 2007

to EN 12960:2001PRI/52

EN 13224:—Precast concrete products. Ribbed floorelements

AMENDMENT 1:June 2007

to EN 13224:2004B/524

EN 13277:—Protective equipment for martial arts

EN 13277-3:—Additional requirements and test methods fortrunk protectors

AMENDMENT 1:June 2007

to EN 13277-3:2000PH/3/9

EN 13277-4:—Additional requirements and test methods forhead protectors

AMENDMENT 1:June 2007

to EN 13277-4:2001PH/3/9

EN 13363:—Solar protection devices combined with glazing.Calculation of solar and light transmittance

EN 13363-1:—Simplified method

AMENDMENT 1:July 2007

to EN 13363-1:2003B/540

EN 13443:—Water conditioning equipment inside buildings.Mechanical filters

EN 13443-2:—Particle rating 1 µm to less than 80 µm.Requirements for performance, safety andtesting

AMENDMENT 1:June 2007

to EN 13443-2:2005B/504

CEN European Standards continued...

58 Update Standards Aug 2007Prices may be subject to change.

e-mail

your order

[email protected]

Page 53: August 2007

EN 60068-3-11:2007(IEC 60068-3-11:2007)Supporting documentation and guidance.Calculation of uncertainty of conditions inclimatic test chambers

GEL/104

EN 60191:—Mechanical standardization of semiconductordevices

EN 60191-6-16:2007(IEC 60191-6-16:2007)Glossary of semiconductor tests and burn-insockets for BGA, LGA, FBGA and FLGA

EPL/47

EN 60317:—Specifications for particular types of windingwires

EN 60317-28:—(IEC 60317-28:1990/A2:2007)Polyesterimide enamelled rectangular copperwire, class 180

AMENDMENT 2:July 2007

to EN 60317-28:1996GEL/55

EN 60335:—Household and similar electrical appliances.Safety

EN 60335-2-30:—(IEC 60335-2-30:2002/A2:2007)Particular requirements for room heaters

AMENDMENT 2:June 2007

to EN 60335-2-30:2003CPL/61/07

EN 60335-2-68:—(IEC 60335-2-68:2002/A2:2007)Particular requirements for spray extractionappliances, for industrial and commercial use

AMENDMENT 2:June 2007

to EN 60335-2-68:2003CPL/61/10

EN 60335-2-87:—(IEC 60335-2-87:2002/A1:2007)Particular requirements for electrical animal-stunning equipment

AMENDMENT 1:June 2007

to EN 60335-2-87:2002CPL/61/8

EN 60446:2007(IEC 60446:2007)Basic and safety principles for man-machineinterface, marking and identification.Identification of conductors by colours oralphanumerics

GEL/16

CEN/TS 15531-2:2007Communications infrastructure

EPL/278

CEN/TS 15531-3:2007Functional service interfaces

EPL/278

CENELEC PUBLICATIONS

EUROPEAN RATIFIED TEXTS

The documents listed below have recentlybeen issued by CENELEC but have not yetbeen published as BS ENs. BSI has anobligation to adopt all ENs and towithdraw any conflicting BritishStandards (BSs) or parts of BSs. Thefollowing will be implemented as BS ENsor as amendments to BS ENs shortly.Notification of their implementation willbe given in the BS EN Publications sectionof the relevant edition of UpdateStandards.

EN 55016:—Specification for radio disturbance andimmunity measuring apparatus and methods

EN 55016-1-4:2007(IEC CISPR 16-1-4:2007)Radio disturbance and immunity measuringapparatus. Ancillary equipment. Radiateddisturbances

GEL/210/12

EN 60034:—Rotating electrical machines

EN 60034-14:—(IEC 60034-14:2003/A1:2007)Mechanical vibration of certain machines withshaft heights 56 mm and higher. Measurement,evaluation and limits of vibration severity

AMENDMENT 1:June 2007

to EN 60034-14:2004PEL/2

EN 60068:—Environmental testing

EN 60068-2-69:2007(IEC 60068-2-69:2007)Tests. Test Te: Solderability testing of electroniccomponents for surface mounting devices(SMD) by the wetting balance method

EPL/501

EN 60068-2-82:2007(IEC 60068-2-82:2007)Tests. Test Tx: Whisker test methods forelectronic and electric components

EPL/501

EN 14845:—Test methods for fibres in concrete

EN 14845-1:2007Reference concretes

B/517/11

EN 14897:—Water conditioning equipment inside buildings.Devices using mercury low-pressure ultravioletradiators. Requirements for performance, safetyand testing

AMENDMENT 1:June 2007

to EN 14897:2006B/504

EN 14898:—Water conditioning equipment inside buildings.Active media devices. Requirements forperformance, safety and testing

AMENDMENT 1:June 2007

to EN 14898:2006B/504

EN 15217:2007Energy performance of buildings. Methods forexpressing energy performance and for energycertification of buildings

B/540

EN 15319:2007General principles of design of fibrous (gypsum)plaster works

B/544/1

CEN WORKSHOPAGREEMENTS

CWA 15710:2007Metalex (open XML interchange format forlegal and legislative resources)

no current standard is superseded£51.00 members, £102.00 non-members

CEN TECHNICALSPECIFICATIONS

CEN/TS 15399:2007Gas supply systems. Guidelines for managementsystems for gas distribution network

GSE/33

CEN/TS 15531:—Public transport. Service interface for real-timeinformation relating to public transportoperations

CEN/TS 15531-1:2007Context and framework

EPL/278

Update Standards Aug 2007 Prices may be subject to change. 59

Page 54: August 2007

EN 61190:—Attachment materials for electronic assembly

EN 61190-1-2:2007(IEC 61190-1-2:2007)Requirements for soldering pastes for high-quality interconnects in electronics assembly

EPL/501

EN 61190-1-3:2007(IEC 61190-1-3:2007)Requirements for electronic grade solder alloysand fluxed and non-fluxed solid solders forelectronic soldering applications

EPL/501

EN 61192:—Workmanship requirements for solderedelectronic assemblies

EN 61192-5:2007(IEC 61192-5:2007)Rework, modification and repair of solderedelectronic assemblies

EPL/501

EN 61290:—Optical amplifiers. Test methods

EN 61290-7-1:2007(IEC 61290-7-1:2007)Out-of-band insertion losses. Filtered opticalpower meter method

GEL/86/3

EN 61290-10-4:2007(IEC 61290-10-4:2007)Multichannel parameters. Interpolated sourcesubtraction method using an optical spectrumanalyzer

GEL/86/3

EN 61291:—Optical amplifiers

EN 61291-2:2007(IEC 61291-2:2007)Digital applications. Performance specificationtemplate

GEL/86/3

EN 61300:—Fibre optic interconnecting devices and passivecomponents. Basic test and measurementprocedures

EN 61300-2:—Tests

EN 61300-2-22:2007(IEC 61300-2-22:2007)Change of temperature

GEL/86/2

EN 60793-1-47:2007(IEC 60793-1-47:2006)Macrobending loss

GEL/86/1

EN 60904:—Photovoltaic devices

EN 60904-2:2007(IEC 60904-2:2007)Requirements for reference solar devices

GEL/82

EN 61000:—Electromagnetic compatibility (EMC)

EN 61000-4:—Testing and measurement techniques

EN 61000-4-6:2007(IEC 61000-4-6:2003)Immunity to conducted disturbances, inducedby radio-frequency fields

GEL/210/12

EN 61000-4-20:—(IEC 61000-4-20:2003/A1:2006)Emission and immunity testing in transverseelectromagnetic (TEM) waveguides

AMENDMENT 1:June 2007

to EN 61000-4-20:2003GEL/210/12

EN 60450:—(IEC 60450:2004/A1:2007)Measurement of the average viscometricdegree of polymerization of new and agedcellulosic electrically insulating materials

AMENDMENT 1:June 2007

to EN 60450:2004GEL/112

EN 60587:2007(IEC 60587:2007)Electrical insulating materials used under severeambient conditions. Test methods forevaluating resistance to tracking and erosion

GEL/112

EN 60670:—Boxes and enclosures for electrical accessoriesfor household and similar fixed electricalinstallations

EN 60670-21:2007(IEC 60670-21:2004)Particular requirements for boxes andenclosures with provision for suspension means

PEL/23

EN 60745:—Hand-held motor-operated electric tools. Safety

EN 60745-2-9:—Particular requirements for tappers

AMENDMENT 11:June 2007

to EN 60745-2-9:2003CPL/61/6

EN 60745-2-13:2007(IEC 60745-2-13:2006)Particular requirements for chain saws

CPL/61/6

EN 60745-2-18:—Particular requirements of strapping tools

AMENDMENT 11:June 2007

to EN 60745-2-18:2004CPL/61/6

EN 60745-2-20:—Particular requirements for band saws

AMENDMENT 11:June 2007

to EN 60745-2-20:2003CPL/61/6

EN 60793:—Optical fibres

EN 60793-1:—Measurement methods and test procedures

EN 60793-1-42:2007(IEC 60793-1-42:2007)Chromatic dispersion

GEL/86/1

CENELEC Publications continued...

60 Update Standards Aug 2007Prices may be subject to change.

Spanish and Italian language versionsnow available!

Produced to help organizations achieve benefits for integrating commonrequirements of all management system standards and specifications, and managingthese requirements effectively.

Intended for use by organizations implementing the requirements of two ormore management system standards such asISO 9001, ISO 14001, ISO/IEC 27001, ISO 22000,ISO/IEC 20000 and OHSAS 18001.

English version, Price £40

Italian version, Price £40

Spanish version, Price £60

To download or order online go to the newBSI Shop on www.bsi-global.com/shop andtype in PAS 99.

PAS 99 Specification of commonmanagement system requirements

as a framework for integration

Tel +44 (0)20 8996 9001Fax +44 (0)20 8996 7001

Email [email protected]/shop

Page 55: August 2007

ETSI PUBLICATIONS

A listing of all recently issued ETSIDocuments can now be found on ourwebsite, www.bsi-global.com/etsi

All ETSI Publications are available fromBSI Customer Services. Prices are available on application (see ’How to order’ onpage 2).

Comments on documents issued underthe One-Step Approval Procedure (OAP)should be addressed to the namedcontact by the date given.

ETSI publishes the following:

EG ETSI GuidesES ETSI StandardsSR Special ReportsTS Technical SpecificationsTR Technical Reports

IEC PUBLICATIONS

It is BSI policy to supply the UK version ofall adopted standards, which arepublished as British standards, unlessotherwise requested.

The following IEC publications areavailable from BSI Customer Services (see’How to order’ on page 2)

IEC 60034:—Rotating electrical machines

IEC 60034-8:2007(Edition 3)

Terminal markings and direction of rotation£88.00 members, £91.67 non-members

PEL/2

IEC 60034-12:—Starting performance of single-speed three-phase cage induction motors

AMENDMENT 1:June 2007

to IEC 60034-12:2002£14.40 members, £15.00 non-members

PEL/2

IEC 60191:—Mechanical standardization of semiconductordevices

IEC 60191-6-13:2007Design guideline of open-top type sockets forFine-pitch Ball Grid Array and Fine-pitch LandGrid Array (FBGA/FLGA)£49.60 members, £51.67 non-members

EPL/47

EN 61300-2-26:2007(IEC 61300-2-26:2006)Salt mist

GEL/86/2

EN 61340:—Electrostatics

EN 61340-3-1:2007(IEC 61340-3-1:2006)Methods for simulation of electrostatic effects.Human body model (HBM) electrostaticdischarge test waveforms

GEL/101

EN 61760:—Surface mounting technology

EN 61760-2:2007(IEC 61760-2:2007)Transportation and storage conditions ofsurface mounting devices (SMD). Applicationguide

EPL/501

EN 62282:—Fuel cell technologies

EN 62282-3-1:2007(IEC 62282-3-1:2007)Stationary fuel cell power systems. Safety

GEL/105

EN 62282-5-1:2007(IEC 62282-5-1:2007)Portable fuel cell power systems. Safety

GEL/105

CENELEC TECHNICALSPECIFICATIONS

CLC/TS 62441:2007(IEC/TS 62441:2006)Accidentally caused candle flame ignition foraudio/video, communication and informationtechnology equipment

EPL/108

IEC 60384:—Fixed capacitors for use in electronic equipment

IEC 60384-4:—Sectional specification. Aluminium electrolyticcapacitors with solid (MnO2) and non-solidelectrolyte

CORRIGENDUM 1:June 2007

to IEC 60384-4:2007EPL/40X

IEC 60454:—Pressure-sensitive adhesive tapes for electricalpurposes

IEC 60454-2:2007(Edition 3)

Methods of test£112.00 members, £116.67 non-members

GEL/15/3

IEC 60454-3-4:2007(Edition 3)

Specifications for individual materials£27.20 members, £28.33 non-members

GEL/15/3

IEC 60519:—Safety in electroheat installations

IEC 60519-11:2007(Edition 2)

Particular requirements for installations usingthe effect of electromagnetic forces on liquidmetals£49.60 members, £51.67 non-members

PEL/27

IEC 60927:2007(Edition 3)

Auxiliaries for lamps. Starting devices (otherthan glow starters). Performance requirements£88.00 members, £91.67 non-members

CPL/34/3

IEC 61023:2007(Edition 3)

Maritime navigation and radiocommunicationequipment and systems. Marine speed anddistance measuring equipment (SDME).Performance requirements. Methods of testingand required test results£40.00 members, £41.67 non-members

EPL/80

IEC 61097:—Global maritime distress and safety system(GMDSS)

IEC 61097-1:2007(Edition 2)

Radar transponder. Marine search and rescue(SART). Operational and performancerequirements, methods of testing and requiredtest results£49.60 members, £51.67 non-members

EPL/80

CENELEC Publications continued...

62 Update Standards Aug 2007Prices may be subject to change.

Help Us to Help

You!

Always quote your Customer Number

Don’t know your number?

Contact Customer Services

020 8996 9001

who will be happy to check it for you

Page 56: August 2007

ISO PUBLICATIONS

It is BSI policy to supply the UK version ofall adopted standards, which arepublished as British standards, unlessotherwise requested.The following ISO publications are availablefrom BSI Customer Services (see ’How to order’on page 2)

ISO 48:2007(Edition 4)

Rubber, vulcanized or thermoplastic.Determination of hardness (hardness between10 IRHD and 100 IRHD)£65.60 members, £68.33 non-members

PRI/22

Will be implemented as an identical British Standard

ISO 188:2007(Edition 4)

Rubber, vulcanized or thermoplastic.Accelerated ageing and heat resistance tests£62.40 members, £65.00 non-members

PRI/22

Will be implemented as an identical British Standard

ISO 209:2007Aluminium and aluminium alloys. Chemicalcomposition£28.80 members, £30.00 non-members

NFE/35

Will not be implemented as a British Standard

ISO 355:2007(Edition 2)

Rolling bearings. Metric tapered roller bearings.Boundary dimensions and series designations£83.20 members, £86.67 non-members

MCE/7

Will be implemented as an identical British Standard

ISO 362:—Measurement of noise emitted by acceleratingroad vehicles. Engineering method

ISO 362-1:2007M and N categories£105.60 members, £110.00 non-members

EH/1/2

Will be implemented as an identical British Standard

ISO 389:—Acoustics. Reference zero for the calibration ofaudiometric equipment

ISO 389-6:2007Reference equivalent threshold sound pressurelevels for acoustic test signals of short duration£44.80 members, £46.67 non-members

EH/1/1

Will be implemented as an identical British Standard

IEC/TS 62351:—Power systems management and associatedinformation exchange. Data andcommunications security£33.60 members, £35.00 non-member

IEC/TS 62351-3:2007Communication network and system security.Profiles including TCP/IP£33.60 members, £35.00 non-members

PEL/57

IEC/TS 62351-4:2007Profiles including MMS£49.60 members, £51.67 non-members

PEL/57

IEC/TS 62351-6:2007Security for IEC 61850£49.60 members, £51.67 non-members

PEL/57

IEC 62385:2007Nuclear power plants. Instrumentation andcontrol important to safety. Methods forassessing the performance of safety systeminstrument channels£96.00 members, £100.00 non-members

NCE/8

IEC 62402:2007Obsolescence management. Application guide£96.00 members, £100.00 non-members

OS/1

IEC 62447:—Helical-scan compressed digital video cassettesystem using 6,35 mm magnetic tape. Format D-12

IEC 62447-2:2007Compression format (TA6)£148.80 members, £155.00 non-members

EPL/100

IEC/PAS PUBLICATIONS

IEC/PAS 62473:2007Clothes washing machines for household use.Methods for measuring the mechanical actionin household washing machines£88.00 members, £91.67 non-members

CPL/59/1

IEC 61156:—Multicore and symmetrical pair/quad cables fordigital communications

IEC 61156-1:2007(Edition 3)

Generic specification£112.00 members, £116.67 non-members

EPL/46

IEC 61892:—Mobile and fixed offshore units. Electricalinstallations

IEC 61892-4:2007Cables£112.00 members, £116.67 non-members

JPEL/18

IEC 62026:—Low-voltage switchgear and controlgear.Controller-device interfaces (CDIs)

IEC 62026-1:2007(Edition 2)

General rules£40.00 members, £41.67 non-members

PEL/17/2

IEC/TS 62257:—Recommendations for small renewable energyand hybrid systems for rural electrification

IEC/TS 62257-8-1:2007Selection of batteries and battery managementsystems for stand-alone electrification systems.Specific case of automotive flooded lead-acidbatteries available in developing countries£73.60 members, £76.67 non-members

GEL/82

IEC/TS 62257-9-5:2007Integrated system. Selection of portable PVlanterns for rural electrification projects£88.00 members, £91.67 non-members

GEL/82

IEC/TS 62257-12-1:2007Selection of self-ballasted lamps (CFL) for ruralelectrification systems and recommendationsfor household lighting equipment£60.80 members, £63.33 non-members

GEL/82

IEC/TS 62312:—Guideline for synchronization of audio andvideo

IEC/TS 62312-2:2007Methods for synchronization of audio andvideo systems£49.60 members, £51.67 non-members

EPL/100

Update Standards Aug 2007 Prices may be subject to change. 63

e-mail

your order

[email protected]

Page 57: August 2007

ISO 5603:2007(Edition 2)

Rubber, vulcanized. Determination of adhesionto wire cord£54.40 members, £56.67 non-members

PRI/22

Will be implemented as an identical British Standard

ISO 5832:—Implants for surgery. Metallic materials

ISO 5832-1:2007(Edition 4)

Wrought stainless steel£33.60 members, £35.00 non-members

CH/150/1

Will be implemented as an identical British Standard

ISO 5832-9:2007(Edition 2)

Wrought high nitrogen stainless steel£33.60 members, £35.00 non-members

CH/150/1

Will be implemented as an identical British Standard

ISO 6281:2007Plain bearings. Testing under conditions ofhydrodynamic and mixed lubrication in test rigs£57.60 members, £60.00 non-members

MCE/12

Will be implemented as an identical British Standard

ISO 6520:—Welding and allied processes. Classification ofgeometric imperfections in metallic materials

ISO 6520-1:2007(Edition 2)

Fusion welding£100.80 members, £105.00 non-members

WEE/1

Will be implemented as an identical British Standard

ISO 6943:2007(Edition 2)

Rubber, vulcanized. Determination of tensionfatigue£57.60 members, £60.00 non-members

PRI/22

Will be implemented as an identical British Standard

ISO 7240:—Fire detection and alarm systems

ISO 7240-16:2007Sound system control and indicating equipment£100.80 members, £105.00 non-members

FSH/12

Will not be implemented as a British Standard

ISO 2469:2007(Edition 4)

Paper and board and pulps. Measurement ofdiffuse radiance factor£65.60 members, £68.33 non-members

PAI/11

Will be implemented as an identical British Standard

ISO 3776:—Tractors and machinery for agriculture. Seatbelts

ISO 3776-2:2007Anchorage strength requirements£28.80 members, £30.00 non-members

AGE/6

Will be implemented as an identical British Standard

ISO 4437:2007(Edition 3)

Buried polyethylene (PE) pipes for the supply ofgaseous fuels. Metric series. Specifications£70.40 members, £73.33 non-members

PRI/88/2/P2

Will not be implemented as a British Standard

ISO 4823:—Dentistry. Elastomeric impression materials

AMENDMENT 1:June 2007

to ISO 4823:2000£11.20 members, £11.67 non-members

CH/106/2

Will be implemented as an identical British Standard

ISO 4869:—Acoustics. Hearing protectors

ISO 4869-3:2007Measurement of insertion loss of ear-muff typeprotectors using an acoustic test fixture£49.60 members, £51.67 non-members

EH/1/1

Will be implemented as an identical British Standard

ISO 5001:2007(Edition 4)

Cold-reduced carbon steel sheet for vitreousenamelling£38.40 members, £40.00 non-members

ISE/10

Will not be implemented as a British Standard

ISO 5593:—Rolling bearings. Vocabulary

AMENDMENT 1:June 2007

to ISO 5593:1997MCE/7

Will not be implemented as a British Standard

ISO 5600:2007(Edition 3)

Rubber. Determination of adhesion to rigidmaterials using conical shaped parts£33.60 members, £35.00 non-members

PRI/22

Will be implemented as an identical British Standard

ISO 583:2007(Edition 3)

Conveyor belts with a textile carcass. Total beltthickness and thickness of constitutiveelements. Test methods£44.80 members, £46.67 non-members

PRI/67

Will be implemented as an identical British Standard

ISO 633:2007(Edition 2)

Cork. Vocabulary£83.20 members, £86.67 non-members

PRI/81

Will not be implemented as a British Standard

ISO 814:2007(Edition 4)

Rubber, vulcanized or thermoplastic.Determination of adhesion to metal. Two-platemethod£33.60 members, £35.00 non-members

PRI/22

Will be implemented as an identical British Standard

ISO 1088:2007(Edition 3)

Hydrometry. Velocity-area methods usingcurrent-meters. Collection and processing ofdata for determination of uncertainties in flowmeasurement£100.80 members, £105.00 non-members

CPI/113/5

Will be implemented as an identical British Standard

ISO 1224:—Rolling bearings. Instrument precision bearings

ISO 1224-1:2007Boundary dimensions, tolerances andcharacteristics of metric series bearings£49.60 members, £51.67 non-members

MCE/7

Will be implemented as an identical British Standard

ISO 1224-2:2007Boundary dimensions, tolerances andcharacteristics of inch series bearings£57.60 members, £60.00 non-members

MCE/7

Will be implemented as an identical British Standard

ISO 1827:2007(Edition 3)

Rubber, vulcanized or thermoplastic.Determination of shear modulus and adhesionto rigid plates. Quadruple-shear methods£38.40 members, £40.00 non-members

PRI/22

Will be implemented as an identical British Standard

ISO 2007:2007(Edition 4)

Rubber, unvulcanized. Determination ofplasticity. Rapid-plastimeter method£28.80 members, £30.00 non-members

PRI/22

Will be implemented as an identical British Standard

ISO Publications continued...

64 Update Standards Aug 2007Prices may be subject to change.

Page 58: August 2007

ISO 11568:—Banking. Key management (retail)

ISO 11568-4:2007(Edition 2)

Asymmetric cryptosystems. Key managementand life cycle£70.40 members, £73.33 non-members

IST/12

Will be implemented as an identical British Standard

ISO 11815:2007Milk. Determination of total milk-clottingactivity of bovine rennets£49.60 members, £51.67 non-members

AW/5

Will be implemented as an identical British Standard

ISO 11890:—Paints and varnishes. Determination of volatileorganic compound (VOC) content

ISO 11890-1:2007(Edition 2)

Difference method£44.80 members, £46.67 non-members

STI/10

Will be implemented as an identical British Standard

ISO 11898:—Road vehicles. Controller area network (CAN)

ISO 11898-5:2007High-speed medium access unit with low-powermode£65.60 members, £68.33 non-members

AUE/16

Will be implemented as an identical British Standard

ISO 11979:—Ophthalmic instruments. Intraocular lenses

ISO 11979-6:2007(Edition 2)

Shelf-life and transport stability£44.80 members, £46.67 non-members

CH/172/7

Will be implemented as an identical British Standard

ISO 12151:—Connections for hydraulic fluid power andgeneral use. Hose fittings

ISO 12151-4:2007Hose fittings with ISO 6149 metric stud ends£44.80 members, £46.67 non-members

MCE/18/-/4

Will be implemented as an identical British Standard

ISO 12151-5:2007Hose fittings with ISO 8434-2 37° flared ends£49.60 members, £51.67 non-members

MCE/18/-/4

Will be implemented as an identical British Standard

ISO 9229:2007(Edition 2)

Thermal insulation. Definitions of terms£91.20 members, £95.00 non-members

B/540/8

Will be implemented as an identical British Standard

ISO 9928:—Cranes. Crane driving manual

ISO 9928-2:2007Mobile cranes£28.80 members, £30.00 non-members

MHE/3/5

Will not be implemented as a British Standard

ISO 10286:2007(Edition 3)

Gas cylinders. Terminology£94.40 members, £98.33 non-members

PVE/3

Will be implemented as an identical British Standard

ISO 10295:—Fire tests for building elements andcomponents. Fire testing of service installations

ISO 10295-1:2007Penetration seals£54.40 members, £56.67 non-members

FSH/22/3

Will be implemented as an identical British Standard

ISO 11451:—Road vehicles. Vehicle test methods forelectrical disturbances from narrowbandradiated electromagnetic energy

ISO 11451-3:2007(Edition 2)

On-board transmitter simulation£70.40 members, £73.33 non-members

AUE/16

Will be implemented as an identical British Standard

ISO 11452:—Road vehicles. Component test methods forelectrical disturbances from narrowbandradiated electromagnetic energy

ISO 11452-8:2007Immunity to magnetic fields£62.40 members, £65.00 non-members

AUE/16

Will be implemented as an identical British Standard

ISO 11499:2007(Edition 2)

Dentistry. Single-use cartridges for localanaesthetics£44.80 members, £46.67 non-members

CH/106/4

Will be implemented as an identical British Standard

ISO 7637:—Road vehicles. Electrical disturbance fromconduction and coupling

ISO 7637-3:2007(Edition 2)

Electrical transient transmission by capacitiveand inductive coupling via lines other thansupply lines£73.60 members, £76.67 non-members

AUE/16

Will be implemented as an identical British Standard

ISO 8185:2007(Edition 3)

Respiratory tract humidifiers for medical use.Particular requirements for respiratoryhumidification systems£100.80 members, £105.00 non-members

CH/121/5

Will be implemented as an identical British Standard

ISO 8330:2007(Edition 2)

Rubber and plastics hoses and hose assemblies.Vocabulary£91.20 members, £95.00 non-members

PRI/66

Will be implemented as an identical British Standard

ISO 8468:2007(Edition 3)

Ships and marine technology. Ships bridgelayout and associated equipment. Requirementsand guidelines£91.20 members, £95.00 non-members

SME/32/5

Will be implemented as an identical British Standard

ISO/IEC 8484:2007Information technology. Magnetic stripes onsavings books£57.60 members, £60.00 non-members

IST/17

Will be implemented as an identical British Standard

ISO 8568:2007(Edition 2)

Mechanical shock. Testing machines.Characteristics and performance£70.40 members, £73.33 non-members

GME/21

Will not be implemented as a British Standard

ISO 9026:2007(Edition 2)

Raw rubber or unvulcanized compounds.Determination of green strength£38.40 members, £40.00 non-members

PRI/22

Will be implemented as an identical British Standard

ISO Publications continued...

66 Update Standards Aug 2007Prices may be subject to change.

Page 59: August 2007

ISO 15874:—Plastics piping systems for hot and cold waterinstallations. Polypropylene (PP)

ISO 15874-1:—General

AMENDMENT 1:June 2007

to ISO 15874-1:2003PRI/88/2

Will be implemented as an identical British Standard

ISO 15875:—Plastics piping systems for hot and cold waterinstallations. Crosslinked polyethylene (PE-X)

ISO 15875-1:—General

AMENDMENT 1:June 2007

to ISO 15875-1:2003PRI/88/2

Will be implemented as an identical British Standard

ISO 15876:—Plastics piping systems for hot and cold waterinstallations. Polybutylene (PB)

ISO 15876-1:—General

AMENDMENT 1:June 2007

to ISO 15876-1:2003PRI/88/2

Will be implemented as an identical British Standard

ISO/IEC 15938:—Information technology. Multimedia contentdescription interface

ISO/IEC 15938-7:—Conformance testing

AMENDMENT 2:June 2007

to ISO/IEC 15938-7:2003£11.20 members, £11.67 non-members

IST/37

Will not be implemented as a British Standard. Isapproved as suitable for use in the UK

ISO/IEC 16390:2007(Edition 2)

Information technology. Automaticidentification and data capture techniques.Interleaved 2 of 5 bar code symbologyspecification£62.40 members, £65.00 non-members

IST/34

Will be implemented as an identical British Standard

ISO 16840:—Wheelchair seating

ISO 16840-2:2007Pressure management devices£73.60 members, £76.67 non-members

CH/173/1

Will not be implemented as a British Standard

ISO/IEC 14496:—Information technology. Coding of audio-visualobjects

ISO/IEC 14496-10:—Advanced video coding

AMENDMENT 1:June 2007

to ISO/IEC 14496-10:2005£11.20 members, £11.67 non-members

IST/37

Will not be implemented as a British Standard. Isapproved as suitable for use in the UK

ISO 14644:—Cleanrooms and associated controlledenvironments

ISO 14644-6:2007Vocabulary£86.40 members, £90.00 non-members

LBI/30

Will be implemented as an identical British Standard

ISO 15236:—Steel cord conveyor belts

ISO 15236-3:2007Special safety requirements for belts for use inunderground installations£57.60 members, £60.00 non-members

PRI/67

Will be implemented as an identical British Standard

ISO/IEC 15457:—Identification cards. Thin flexible cards

ISO/IEC 15457-2:2007(Edition 2)

Magnetic recording technique£65.60 members, £68.33 non-members

IST/17

Will be implemented as an identical British Standard

ISO 15614:—Specification and qualification of weldingprocedures for metallic materials. Weldingprocedure test

ISO 15614-7:2007Overlay welding£70.40 members, £73.33 non-members

WEE/36

Will be implemented as an identical British Standard

ISO 15706:—Information and documentation. InternationalStandard Audiovisual Number (ISAN)

ISO 15706-2:2007Version identifier£65.60 members, £68.33 non-members

IDT/2/18

Will be implemented as an identical British Standard

ISO 12640:—Graphic technology. Prepress digital dataexchange

ISO 12640-3:2007CIELAB standard colour image data(CIELAB/SCID)£86.40 members, £90.00 non-members

PAI/43

Will be implemented as an identical British Standard

ISO 12742:2007(Edition 2)

Copper, lead, and zinc sulfide concentrates.Determination of transportable moisture limits.Flow-table method£62.40 members, £65.00 non-members

NFE/36

Will be implemented as an identical British Standard

ISO 13295:2007(Edition 2)

Dentistry. Mandrels for rotary instruments£38.40 members, £40.00 non-members

CH/106/4

Will be implemented as an identical British Standard

ISO 13319:2007(Edition 2)

Determination of particle size distributions.Electrical sensing zone method£91.20 members, £95.00 non-members

LBI/37

Will be implemented as an identical British Standard

ISO 13404:2007Prosthetics and orthotics. Categorization anddescription of external orthoses and orthoticcomponents£38.40 members, £40.00 non-members

CH/168

Will be implemented as an identical British Standard

ISO 13491:—Banking. Secure cryptographic devices (retail)

ISO 13491-1:2007(Edition 2)

Concepts, requirements and evaluationmethods£83.20 members, £86.67 non-members

IST/12

Will be implemented as an identical British Standard

ISO 13571:2007Life-threatening components of fire. Guidelinesfor the estimation of time available for escapeusing fire data£65.60 members, £68.33 non-members

FSH/16

Will be implemented as an identical British Standard

ISO Publications continued...

68 Update Standards Aug 2007Prices may be subject to change.

Page 60: August 2007

ISO/IEC TR 19766:2007Information technology. Survey of icons andsymbols that provide access to functions andfacilities to improve the use of informationtechnology products by the elderly and personswith disabilities£78.40 members, £81.67 non-members

ICT/-/1

Will not be implemented as a British Standard

ISO 19933:2007Space systems. Format for spacecraft launchenvironment test report£65.60 members, £68.33 non-members

ACE/68/-/2

Will be implemented as an identical British Standard

ISO/TS 20452:2007Requirements and Logical Data Model for aPhysical Storage Format (PSF) and anApplication Program Interface (API) and LogicalData Organization for PSF used in IntelligentTransport Systems (ITS) Database Technology£105.60 members, £110.00 non-members

EPL/278

Will not be implemented as a British Standard

ISO 20776:—Clinical laboratory testing and in vitrodiagnostic test systems. Susceptibility testing ofinfectious agents and evaluation ofperformance of antimicrobial susceptibility testdevices

ISO 20776-2:2007Evaluation of performance of antimicrobialsusceptibility test devices£44.80 members, £46.67 non-members

CH/212

Will be implemented as an identical British Standard

ISO/TR 20824:2007Ophthalmic instruments. Background for lighthazard specification in ophthalmic instrumentstandards£62.40 members, £65.00 non-members

CH/172/6

Will not be implemented as a British Standard

ISO/IEC 21000:—Information technology. Multimedia framework(MPEG-21)

ISO/IEC 21000-7:—Digital Item Adaptation

AMENDMENT 2:June 2007

to ISO/IEC 21000-7:2004£129.60 members, £135.00 non-members

IST/37

Will not be implemented as a British Standard. Isapproved as suitable for use in the UK

ISO 17714:2007Meteorology. Air temperature measurements.Test methods for comparing the performance ofthermometer shields/screens and definingimportant characteristics£65.60 members, £68.33 non-members

EH/2

Will be implemented as an identical British Standard

ISO 18373:—Rigid PVC pipes. Differential scanningcalorimetry (DSC) method

ISO 18373-1:2007Measurement of the process temperature£49.60 members, £51.67 non-members

PRI/88/4

Will be implemented as an identical British Standard

ISO 18416:2007Cosmetics. Microbiology. Detection of Candidaalbicans£57.60 members, £60.00 non-members

CW/217

Will be implemented as an identical British Standard

ISO 18916:2007Imaging materials. Processed imaging materials.Photographic activity test for enclosurematerials£54.40 members, £56.67 non-members

CPW/42

Will be implemented as an identical British Standard

ISO 19111:2007(Edition 2)

Geographic information. Spatial referencing bycoordinates£120.00 members, £125.00 non-members

IST/36

Will be implemented as an identical British Standard

ISO 19493:2007Water quality. Guidance on marine biologicalsurveys of littoral and sublittoral hard bottoms£70.40 members, £73.33 non-members

EH/3/5

Will be implemented as an identical British Standard

ISO/IEC TR 19765:2007Information technology. Survey of icons andsymbols that provide access to functions andfacilities to improve the use of informationtechnology products by the elderly and personswith disabilities£78.40 members, £81.67 non-members

ICT/-/1

Will not be implemented as a British Standard. Isapproved as suitable for use in the UK

ISO 16850:2007Road vehicles. Pedestrian protection. Child headimpact test method£54.40 members, £56.67 non-members

AUE/15

Will be implemented as an identical British Standard

ISO 16883:2007Packaging. Transport packages for dangerousgoods. Test methods for large packagings£78.40 members, £81.67 non-members

PKW/0

Will be implemented as an identical British Standard

ISO 16932:2007Glass in building. Destructive windstorm-resistant security glazing. Test and classification£62.40 members, £65.00 non-members

B/520/3

Will not be implemented as a British Standard

ISO 16933:2007Glass in building. Explosion-resistant securityglazing. Test and classification for arena air-blast loading£70.40 members, £73.33 non-members

B/520/3

Will not be implemented as a British Standard

ISO 16934:2007Glass in building. Explosion-resistant securityglazing. Test and classification by shock-tubeloading£70.40 members, £73.33 non-members

B/520/3

Will not be implemented as a British Standard

ISO 17115:2007Health informatics. Vocabulary forterminological systems£49.60 members, £51.67 non-members

IST/35

Will be implemented as an identical British Standard

ISO 17363:2007Supply chain applications of RFID. Freightcontainers£54.40 members, £56.67 non-members

TW/1

Will not be implemented as a British Standard

ISO 17382:2007Oil of Magnolia flower, China type (Michelia xalba DC)£38.40 members, £40.00 non-members

AW/54

Will be implemented as an identical British Standard

Update Standards Aug 2007 Prices may be subject to change. 69

Page 61: August 2007

ISO/TR 25901:2007Welding and related processes. Vocabulary£129.60 members, £135.00 non-members

WEE/1

Will not be implemented as a British Standard

ISO/TR 27609:2007Vibration in hand-held tools. Vibrationmeasurement methods for grinders. Evaluationof round robin test£78.40 members, £81.67 non-members

MCE/8/-/2

Will be implemented as an identical British Standard

ISO 22891:2007Paper. Determination of transmittance bydiffuse reflectance measurement£44.80 members, £46.67 non-members

PAI/11

Will be implemented as an identical British Standard

ISO 23317:2007Implants for surgery. In vitro evaluation forapatite-forming ability of implant materials£54.40 members, £56.67 non-members

CH/150/1

Will be implemented as an identical British Standard

ISO/TR 23462:2007Space systems. Guidelines to define themanagement framework for a space project£44.80 members, £46.67 non-members

ACE/68/-/5

Will be implemented as an identical British Standard

ISO 24014:—Public transport. Interoperable faremanagement system

ISO 24014-1:2007Architecture£112.00 members, £116.67 non-members

EPL/278

Will be implemented as an identical British Standard

ISO/TS 24348:2007(Edition 2)

Ophthalmic optics. Spectacle frames. Methodfor the simulation of wear and detection ofnickel release from metal and combinationspectacle frames£62.40 members, £65.00 non-members

CH/172/3

Will be implemented as an identical British Standard

ISO 24531:2007Intelligent transport systems. Systemarchitecture, taxonomy and terminology. UsingXML in ITS standards, data registries and datadictionaries£105.60 members, £110.00 non-members

EPL/278

Will be implemented as an identical British Standard

ISO/IEC 24775:2007Information technology. Storage management£233.60 members, £243.33 non-members

ICT/-/1

Will not be implemented as a British Standard. Isapproved as suitable for use in the UK

ISO/IEC 25434:2007(Edition 2)

Information technology. Data interchange on120 mm and 80 mm optical disk using +R DLformat. Capacity: 8,55 Gbytes and 2,66 Gbytesper side (recording speed up to 8x)£156.80 members, £163.33 non-members

ICT/-/1

Will not be implemented as a British Standard

ISO/IEC 21000-18:2007Digital Item Streaming£120.00 members, £125.00 non-members

IST/37

Will not be implemented as a British Standard. Isapproved as suitable for use in the UK

ISO 21016:2007Office furniture. Tables and desks. Test methodsfor the determination of stability, strength anddurability£49.60 members, £51.67 non-members

FW/0

Will not be implemented as a British Standard

ISO 21129:2007Hygrothermal performance of buildingmaterials and products. Determination of watervapour transmission properties. Box methods£49.60 members, £51.67 non-members

B/540/8

Will be implemented as an identical British Standard

ISO 21349:2007Space systems. Project reviews£65.60 members, £68.33 non-members

ACE/68/-/5

Will be implemented as an identical British Standard

ISO 21549:—Health informatics. Patient healthcard data

ISO 21549-7:2007Electronic prescriptions (medication data)£91.20 members, £95.00 non-members

IST/35

Will be implemented as an identical British Standard

ISO 21994:2007Passenger cars. Stopping distance at straight-line braking with ABS. Open-loop test method£73.60 members, £76.67 non-members

AUE/15

Will be implemented as an identical British Standard

ISO/TR 22335:2007Surface chemical analysis. Depth profiling.Measurement of sputtering rate. Mesh-replicamethod with the use of a mechanical stylusprofilometer£62.40 members, £65.00 non-members

CII/60

Will be implemented as an identical British Standard

ISO 22794:2007Dentistry. Implantable materials for bonereconstruction in oral and maxillofacial surgery.Content of a technical file£44.80 members, £46.67 non-members

CH/106/8

Will not be implemented as a British Standard

ISO Publications continued...

70 Update Standards Aug 2007Prices may be subject to change.

Spanish and Italian language versionsnow available!

Produced to help organizations achieve benefits for integrating commonrequirements of all management system standards and specifications, and managingthese requirements effectively.

PAS 99 can help organizations:

• improve business focus • take a more holistic approach to managing

business risks • ensure less conflict between systems • reduce duplication and bureaucracy • have more effective and efficient audits

both internally and externally

Intended for use by organizationsimplementing the requirements of two ormore management system standards such asISO 9001, ISO 14001, ISO/IEC 27001, ISO 22000,ISO/IEC 20000 and OHSAS 18001.

English versionPublished August 2006ISBN 0 580 49059 9Price £40

Italian versionPublished August 2006ISBN 0 580 49408 XPrice £40

Spanish versionPublished July 2007ISBN 978 0 580 59481 6Price £60

To download or order online go to the newBSI Shop on www.bsi-global.com/shop andtype in PAS 99.

PAS 99 Specification of commonmanagement system requirements

as a framework for integration

Tel +44 (0)20 8996 9001Fax +44 (0)20 8996 7001

Email [email protected]/shop