Headquarters:2901 W. Sam Houston Pkwy. N., Suite A-130

Houston, TX 77043

FAX: (713) 672-7905PHONE: (713) 691-4401

E-MAIL: pmi@pmi-auction.comWEBSITE: www.pmi-auction.com

TOYODA MDL. GU4-100 CNC INTERNAL CYLINDRICAL GRINDER

(2) GARDNER DENVER 100 HP ROTARY SCREW AIR COMPRESSORS

PRECISION MACHINE TOOL MANUFACTURING PLANT CLOSING, PLUS Equip. in Guelph, Ontario, Canada & Emporium, PA, USA to Be Sold by Photo From the Ann Arbor Machine Sale SiteFeaturing: CNC & Conventional Jig Mills, CNC Vert. Machining Centers, CNC Turning Centers, CNC Horiz. Machining Centers, CNC Universal Cylindrical Grinder, Punching & Drawing Press, Grinders, Lathes, Mills, Saws, Welders, Induction Hardening

& Brazing Equip., Q.C. & Precision Measuring Instruments, Huge Machine Tool Component Part Inventory, Huge Qty. of Plant Support Equip., Air Compressors Up to 200 HP, Rolling Stock, Offices, Much More!

Bob Braman • Ron Moore Jack Introligator

HOUSTON • DALLAS • ST. LOUIS

Sale Conducted By:

AUCTION

Read Terms and Conditions on Back Page of Brochure

On-Site Bidding in Chelsea, Michigan, or Bid Via Webcast at

At the Premises of

ANN ARBOR MACHINE5800 Sibley Road, CHELSEA (Ann Arbor Area)

MICHIGAN 48118(See Directions on Back Page)

THURSDAY MAY 21

10:00 A.M.

Inspection at Ann Arbor Machine: Wed., May 20, 9:00 A.M. to 4:00 P.M.

& Morning of SaleInspection at Guelph & Emporium

by Appointment Only (See Back Cover)

12% BUYER’S PREMIUM ONSITE • 15% VIA WEBCAST

CNC

JOHNFORD MDL. TC-50 CNC LATHE

CNCDEVLIEG 4K-96 CNC JIG MILL

CNC

1999 1999

2 3DEVLIEG ACCESSORIES

DEVLIEG 4K-72 JIG MILL

CNC JIG MILLDEVLIEG MDL. 4K-96, Anilam Commando Mdl. 1100 3-axis CNC control, 40" x 96" tbl., 60" vert. travel, 20" spndl. travel, 4" spndl. dia., #50 spndl. taper, spds.: 14–1,450 RPM, 20 HP drive motor, S/N 9293.

JIG MILLSDEVLIEG MDL. 4K-72, 40" x 72" tbl., 48" vert. travel, spds.: 20" spndl. travel, 4" spndl. dia., #50 taper spndl., 14–1,450 RPM, 20 HP drive motor, 2-axis D.R.O., S/N 8956.DEVLIEG MDL. 4K-72, 40" x 72" tbl., 60" vert. travel, 20" spndl. travel, 4" spndl. dia., #50 taper spndl., spds.: 14–1,450, 20 HP drive motor, Anilam Wizard 3-axis D.R.O., S/N 9435.

DEVLIEG ACCESSORIESDEVLIEG 16-1/2" X 30" X 16" 2 PIECE ANGLE PLATE SET; DEVLIEG 20-3/8" X 40" X 22" 2 PIECE ANGLE PLATE SET; 19-5/8" X 37-1/2" X 20" SGL. PIECE ANGLE PLATE SET; 26" X 26" AIR LIFT ROTARY; (2) 30" X 30" AIR LIFT ROTARY; 40" X 30" AIR LIFT ROTARY; 60" X 40" AIR LIFT ROTARY; 40" X 40" AIR LIFT ROTARY; 40" X 20" TYPE E INDEX TBLS.; 24" X 24" DOUBLE SINE TBL.; (4) FULLER TOOL 12-1/2" X 41" X 22" CAST IRON STANDARD ANGLE PLATES; (2) 5" X 24" X 12" ANGLE PLATES; (2) 12" X 36" X 23" ANGLE PLATES; (2) 10" X 48" X 30" ANGLE PLATES; 33" X 37" X 28" DRILLED AND TAPPED ANGLE PLATE; (2) 11" X 27" X 16" ANGLE PLATES. LARGE QUANTITY OF DEVLIEG PRECISION TOOLING INCLUDING: MICROBORE BORING HEADS; MILLING CUTTERS; ENDMILL HOLDERS; TAPER SHANK HOLDERS; JACOBS DRILL CHUCKS; SHELL MILLS.

CNC VERTICAL MACHINING CENTERSMAZAK MDL. AJV-35/60, Mazatrol M-32 CNC control, 50"X, 31.5"Y, 20"Z travels, CAT-50 spndl. taper, 25 HP spndl. drive motor, 6,000 RPM, 30 tool ATC, S/N 77934, (Emporium).(3) MAZAK MDL. AJV-15/40, Mazatrol M-2 CNC control, 43" x 16" tbl., 22"X, 16"Y, 15"Z travels, CAT-40 spndl. taper, 6,000 RPM, 7.5 HP spndl. drive motor, 16 tool ATC, S/N 58867, S/N 59435, S/N 65834, (Guelph).DAEWOO MDL. ACE-V35, Fanuc OM control, 25.6" x 43.3" table, 22"X, 15.7"Y, 18"Z, 6,000 RPM, 10 HP, 16-tool ATC, chip conveyor, S/N 350417, (Emporium).

CNC HORIZONTAL MACHINING CENTERSKIRA PRODUCTION CENTER MDL. KN-40HS-800, 31-1/2" X-axis travel, 11.8" Y-axis travel, 9.8" Z-axis travel, 39.4" x 13.8" tbl. working area, 2,200 lb. tbl. load cap., spndl. spds.: 120–10,000 RPM, CAT-40 spndl. taper, 16 pos. ATC, 7-1/2 HP main spndl. drive motor, Haas Mdl. HRT310 CNC rotary tbl. w/Haas servo control unit.KEARNEY & TRECKER MILWAUKEEMATIC MDL. 1015, Kearney & Trecker Gemini CNC control, 18" sq. pallets, 2-pallet auto. changer, CAT-50 spndl. taper, 120 pos. ATC.

MAZAK MDL. AJV-35/60 CNC VERTICAL MACHINING CENTER

CNC

(1 OF 3) MAZAK MDL. VQC-15/40 CNC VERTICAL MACHINING CENTER

CNC

DAEWOO MDL. ACE-V35 CNC VERTICAL MACHINING CENTER

CNC

<DEVLIEG 4K-96 CNC JIG MILL

CNC

SPECIAL NOTEMachines marked at the end of their description as “Guelph” or “Emporium” will be sold by photo and can be inspected by appointment only. For an ap-pointment and directions use following contacts:Emporium: Teutech LLC, 227 Barton Rd., Emporium, PA, USA, 15834 contact John Ricnafsky at (814) 486-1896, ext. 1.Guelph: Teutech, 265 Massey Road, Guelph, ONT, Canada, N1H 1B2 contact Brian Fatt at cell number 519-658-3383 or office (519) 836-3180.

2 3

<KIRA HORIZONTAL MACHINING CENTER

ACRATURN 20" X 80" ENGINE LATHE

COLCHESTER 15" X 50" ENGINE LATHE

CNC LATHES(2) JOHNFORD MDL. TC-50, new 1996, Fanuc 0T CNC control, 12.6" turning dia., 44" betw. centers, 2.95" bar cap., 3,000 RPM, 25 H spndl. drive motor, 12 tool turret, 12" 3-jaw hyd. chuck, S/N TK6053, S/N TK6056, (Emporium).DAEWOO MDL. PUMA-8, Fanuc 0T CNC control, 12.2" turning dia., 14.6" turning lgth., 2" bar cap., 2.4" spndl. hole, 5,000 RPM, 20 HP spndl. drive motor, 10 station turret, tool presetter, chip conveyor, S/N PM8SO398, (Guelph).OKUMA MDL. LB15, OSP 5000L CNC control, 12 pos. turret, hyd. tailstock, S/N 1778.MAZAK QUICKTURN 6G, Mazatrol EIA CNC control, gang tooling slide, 6" hyd. chuck, chip conveyor, gantry loader, S/N 129249, (Guelph).

RADIAL ARM DRILLSJOHANSSON 3', Powerfeed 4 MT spndl., 40" adj. height tbl., S/N 33-483.INDEX, elevating column design, 15" x 45" T-slotted production tbl., variable spds.: 42–4,200 RPM.

LATHESACRATURN 20" X 80" ENGINE, Mdl. CS20GS, new 1998, 36–1,400 RPM, 3-jaw chuck, steady rest, S/N 9755, (Guelph).LEBLOND 17" X 30" ENGINE, servo shift headstock, spds.: 38–1,500 RPM, 3-jaw chuck, Trav-A-Dial carriage readout, S/N 4D1608.CLAUSING COLCHESTER 17" X 60" ENGINE, S/N 7/0017/04337, (Emporium).(2) CLAUSING COLCHESTER 15" X 50" ENGINE, 2-1/8" spndl. hole, spds.: 25–2,000 RPM, 10" sw. over crosslide, Trav-A-Dial carriage readout, 3-jaw chuck, S/N 6/0055/26773, S/N 6/0055/31347.BRIDGEPORT 16" X 40", S/N 0274344-140, (Emporium).TONG-IL MDL. L-4 16" x 40" ENGINE, 60–1,500 RPM, S/N 0051903, (Guelph).RIVETT 4" X 18" HIGH SPEED, variable spd., 3-jaw chuck, compound crosslide assembly, cabinet base.

<MAZAK MDL. 6G CNC LATHE

CNC

DAEWOO MDL. PUMA-8 CNC LATHE

CNC

JOHNFORD MDL. TC-50 CNC LATHE

CNC

CNC

4 5

OKAMOTO MDL. IGME-1E-2M-MY-3010C INTERNAL GRINDER

TOYODA MDL. GU4-100 CNC INTERNAL CYLINDRICAL GRINDER

MOORE G-18 JIG GRINDER

SHIGIYA MDL. G30 UNIVERSAL CYLYNDRICAL GRINDER

CINCINNATI MONOSET TOOL & CUTTER GRINDER PARKER MAJESTIC HAND FEED SURFACE GRINDER

CYLINDRICAL GRINDERSTOYODA MDL. GU4-100 CNC UNIVERSAL, new 1999, Toyota CNC control, 12.59" swing, 39.37" betw. centers, 11.8" max. grinding dia., 18" x 3" wheel size, 10–500 RPM workhead spds., 7.5 HP wheel drive motor, internal attachment, S/N RC7698, (Guelph).SHIGIYA MDL. G-30 GO-30B-40A UNIVERSAL, 11.8" swing, 40" betw. centers, 10.6" grinding dia., 14" x 4" wheel size, 5 HP wheel motor, auto. grinding cycles, S/N 121165, (Guelph).SHIGIYA MDL. GPA-27-40 PLAIN, 16" swing, 16" grinding lgth., S/N 5937, (Guelph).CINCINNATI 10" X 96" PLAIN, S/N 3P2H1P-9, (Emporium).

INTERNAL GRINDERSPARKER MAJESTIC NO. 2 UNIVERSAL INTERNAL GRINDER, 6" x 58" tbl. working surface, 30" dist. btn. centers, variable spd. headstock, spds.: 25–450 RPM, currently eqpd. for inter-nal grinding, S/N 2265-1-77.OKAMOTO MDL. IGM-1E-2M-MY-3010C, auto cycle, air chuck, dressing attach., coolant system, S/N 11796, (Guelph).

HYDRAULIC SURFACE GRINDERS

BROWN & SHARPE 8" X 18" “MICROMASTER,” hyd. cross and longitudinal feeds, 8" x 18" electromagnetic chuck, vari-able controls, 6" max. wheel size, S/N 523-8186-396.BROWN & SHARPE 6" X 18" “MICROMASTER,” 6" max. wheel size, 1 HP belt driven spndl., hyd. tbl. and cross feeds, 6" x 18" fine line electromagnetic chuck and controls.K.O. LEE 6" X 12", Mdl. S6128, 6" x 12" perm. magnetic chuck, 6" max. wheel size, 1 HP direct drive spndl., S/N 1405-963.SNOW 10" x 36", 10" x 36" perm. magnetic chuck, S/N 6241, (Guelph).

JIG GRINDERMOORE NO. 3 MDL. G18 JIG GRINDER, 24" x 11" tbl., 45,000 RPM head, Moore 2-axis D.R.O. system, Sony 2-axis D.R.O., S/N G2713.

HAND FEED SURFACE GRINDERSPARKER MAJESTIC 6" X 18", new 1992, 1-1/2 HP variable spd. spndl., pwr. elevation, 8" max. wheel dia., Walker fine line electromagnetic chuck and variable control, S/N 5782ZV92.

PARKER MAJESTIC 6" X 18", 6" max. wheel size, 1 HP direct drive spndl., pwr. rise and fall, perm. magnetic chuck, S/N 2562-SCM-70, S/N 1856-SC-66.

PARKER MAJESTIC 6" X 18", 6" x 12" perm. magnetic chuck, 6" max. wheel size, S/N N.A.

JONES & SHIPMAN 6" x 18" MDL. 540P, S/N 76098, (Guelph).

HARIG 6" X 18", 1 HP direct drive spndl., perm. magnetic chuck, S/N 1890-18.

K.O. LEE 6" X 18", Mdl. S718BRE, 6" x 12" perm. magnetic chuck, over-the-wheel dresser, S/N 24710-UE.

HARIG 6" X 12" CHALLENGER, 1 HP, 6" x 12" fine line chuck and control, S/N 5437.

TOOL & CUTTER GRINDERSCINCINNATI MONOSET MDL. MT, new 1987, large qty. dbl. angle collets, index plates, cams, wheel arbors and chuck, S/N 4898A0187-0066. (2) BROWN & SHARPE MDL. 13 UNIVERSAL, workhead spds.: 128–540 RPM, swivel wheel spndl., tailstock, S/N 525-13-1905, S/N 535-13-1625, (Emporium).WORCESTER MDL. 0, 1/2 HP motor, 1/4" to 2-1/2" grinding cap., drill grinding fixture.BLACK DIAMOND MDL. 10, 1/3 HP motor, No. 60 to 11/32" range, cabinet base, accessories.

CNC

1999

4 5

MARVEL 15A AUTOMATIC HORIZONTAL BANDSAW

BRIDGEPORT/PROTOTRAK MILLING MACHINE

HSK TOOLHOLDERS

MARVEL MDL. 81A/M3M/M5 TILT FRAME VERTICAL BAND SAW

MACHINE SHOP ACCESSORIES

VERTICAL BANDSAWS

VERTICAL TURRET MILLING MACHINESBRIDGEPORT SERIES II, pwr. quill feed, 11" x 58" tbl., chrome ways, 2-axis D.R.O., S/N 3958.(3) BRIDGEPORT/PROTO-TRAK PROGRAMMABLE, 9" x 48" tbl., track vert. quill readout, chrome ways, S/N 229018 and S/N 255593 w/ Proto-Trak Mdl. MX2 – 2-axis programmable control, S/N 234364 w/Proto-Trak Plus 2-axis programmable control.(5) BRIDGEPORT SERIES I, 9" x 42" tbl., chrome ways, 2-axis D.R.O., S/N 222434, S/N 254440, S/N 222669, S/N 222680, (S/N N.A., Emporium).(2) BRIDGEPORT SERIES I, 9" x 42" tbl., chrome ways, S/N 222639, S/N 222644.BRIDGEPORT MDL. J, S/N N.A., (Guelph).

VERTICAL BANDSAWSMARVEL MDL. 81A/M3M/M5 TILT FRAME AUTOMATIC, 18" x 20" nominal cap., 1" x .035" blade size, 30" x 33" tbl., 5 HP blade drive motor, variable blade spds.: 55–340 FPM, H.D. infeed roller conveyor, autofeed system, S/N E2039, (Emporium).MARVEL MDL. 81 TILT FRAME, 18" x 20" nominal cap., 1" x .035" blade size, 30" x 33" tbl., 5 HP blade drive motor, variable blade spds.: 55–340 FPM, H.D. infeed roller conveyor, Sureline saw guide variable vise pressure.MARVEL MDL. 8 TILT FRAME, S/N N.A.DoALL MDL. 3612-3, 24" x 30-1/2" pwr. feed tbl., 36" throat depth, 12" max. cutting height, blade welder and grinder, S/N 15365781.GROB MDL. 4V-24, 24" x 28" tilting tbl., blade welder and grinder, S/N 1222.GROB MDL. NS-24, 24" x 28" tilting tbl., blade welder and grinder, S/N 1666, (Emporium).PARMA WORK-A-MATIC, sliding frame, caster base.

HORIZONTAL BANDSAWSMARVEL MDL. 15A AUTOMATIC, 15" rd. cap., 15" x 20" rect. cap., 1-1/4" x .042" blade size, 5 HP blade drive motor, blade spds.: 55–400 FPM, H.D. infeed roller conveyor system, outboard vise arrangement, cycle counter.(2) W.F. WELLS MDL. W6, coolant system.

MISCELLANEOUS MACHINE SHOP EQUIPMENT & ACCESSORIES

WIDE SELECTION OF HSK 63 TOOLHOLDERS AND ACCESSORIES; ANN ARBOR MACHINE 12" SQ. SINE TBL. w/T-slotted surface; 5" X 5" 2-AXIS MAGNETIC SINE PLATE; 3" X 6" MAGNETIC SINE PLATE; WALKER 6" X 12" 2-AXIS MAGNETIC SINE PLATE; ASSORTED PERMANENT MAGNETIC CHUCKS; KURT 4", 6" AND 8" H.D. ANGLE LOCK MILLING VISES; MORTON MULTI-VISE SIZE 2 MILLING VISE; 3-JAW AND 4-JAW LATHE CHUCKS; DRILL INDEXES; SILVER AND DEMING DRILLS; CHUCKING REAMERS; PILOTED COUNTERBORES, JACOBS DRILL CHUCKS; BORING HEADS; R-8 COLLETS; 5C SPIN INDEXERS; WHEEL BALANCERS; MAGNETIC V BLOCKS; PRECISION GROUND V BLOCKS up to 6"; PRECISION GROUND ANGLE PLATES; SEVERAL HIGH SPEED GRINDING ATTACHMENT for Parker Majestic grinders; HARTFORD SUPER SPACER; MOTORIZED SPIN INDEXER w/sine base; RADIUS AND TANGENT DRESSERS; JEON RADIUS DRESSER; (4) WOLHAUPTER BORING HEADS w/No. 40, No. 4MT and No. 50 taper shanks; WELDON AIR BEARING ENDMILL GRINDING FIXTURE; PARKER PRECISION HYDRAULIC TUBE BENDER; TRACEFORM WHEEL DRESSER; SIEBERT MDL. 5900 DIGITAL PRESETTING GAUGE; SIEBERT MDL. Z5900-75 TOOL PRESETTER; 6" VERTICAL/HORIZONTAL BELT SANDER; LARGE SELECTION OF ALORIS QUICK CHANGE TOOLPOSTS AND TOOLHOLDERS; PRECISION SCRAPED PARALLELS up to 48"; (4) BIAX POWER SCRAPERS w/accessories; PORTOMAG MAGNETIC BASE DRILLS; BLACK & DECKER MAGNETIC BASE DRILLS; PORTER CABLE RECIPROCATING SAW; BLACK & DECKER CIRCULAR SAW; PORTER CABLE INDUSTRIAL BELT SANDER.

PLANT & MACHINERY INC. APPRAISAL DIVISION

Confidential Industrial Machinery & Equipment Appraisals Call 1-800-282-8466

1 OF 3

6 7NATIONAL 52" CAP. HYD. SHEAR

HOLLOW SPINDLE WELDING POSITIONER

<PARTIAL VIEW OF WELDING MACHINES

PROMECAM 25 TON HYD. PRESSBRAKE

PEDDINGHAUS 88 TON HYD. IRONWORKER

LVD MDL. EMF-200 220 TON PUNCHING & DRAWING PRESS

PUNCHING & DRAWING PRESS

LVD 220 T. CAP. COLUMN STYLE HYDRAULIC, Mdl. EMF-OM 200, 120 ton cushion, 39" X 49" bed, 38" open ht., S/N 6871, (Guelph).

SHEETMETAL EQUIPMENTPROMECAM 25 T. CAP. MDL. RG25-12 HYDRAULIC PRESS-BRAKE, 47-1/8" overall length of bed and ram, 40" dist. btn. housings, up-acting hyd. design, S/N 8416.PEDDINGHAUS 88 T. CAP. HYDRAULIC IRONWORKER, 4" x 3-1/2" x 3/8" angle shear cap., 1-1/4" bar shear cap., 1-1/2" plate shear cap., coper and foot pedal operation, S/N 4062756288001.NATIONAL 52" X 12 GA. HYDRAULIC SHEAR, Mdl. NH5212, foot pedal control, manual backgauge, S/N 794-692. ELLIOTT MDL. 3R/5 FLAT SHEAR, 1-1/2" rd. cap., 3/16" x 5" flat cap.NATIONAL 48" X 12 GA. FINGER BRAKE, Mdl. U4812, S/N 442-392.TRIOK MDL. 850-2400 HAND BRAKE, 26"W., assorted bending dies, S/N 07-1643.CUSTOM MANUAL SCREW TYPE STRAIGHTENING MACHINE, shaft centers.PEXTO INITIAL PINCH POWER ROLL, 3" roll dia., 37" roll length w/wire bending grooves, pwr. drive.DIACRO MDL. 2 ROD BENDER, heavy cast iron base.PEXTO 31" X 22 GA. HAND SLIP ROLL, Mdl. 382-D, on fabri-cated steel stand, S/N 11/65.

WELDING MACHINESMILLER MDL. DELTAWELD 451 MIG, 450 amp at 38 v. rated output, 100% duty cycle, Millermatic S52E wire feeder, roller base, S/N JK701040.LINCOLN MDL. SQUAREWAVE TIG-350 TIG, 350 amp AC/DC at 34 v. rated output, 40% duty cycle, programmer panel, TIG torch, roller base, foot pedal, cooler unit, S/N AC734574.(2) LINCOLN MDL. IDEALARC CV-300 MIG, 300 amp at 32 v. rated output, 100% duty cycle, on roller base, S/N U1930202060 w/Lincoln LN-7 wire feeder, S/N U1931016656 w/Cobramatic wire feeder. AIRCO MDL. SQUAREWAVE 300 AC/DC TIG, 300 amp at 32 v. rated output, 50% duty cycle, TIG torch, cooler, foot pedal and controls, S/N N.A.LINCOLN MDL. SQUAREWAVE 255 TIG, 255 amp at 30 v. rated output, 40% duty cycle, cooler unit, TIG torch, foot pedal and controls, S/N U1960710738.LINDE MDL. VI-252 MIG, 250 amp at 37 v. rated output, 100% duty cycle, Miller S52E wire feeder, roller base, S/N N.A.AIRCO MDL. HELIWELDER TIG, 250 amp at 30 v. rated output, 40% duty cycle, roller base, cooler unit, TIG torch, foot pedal, S/N HJ161371.LINCOLN MDL. IDEALARC SP-200 MIG, 200 amp at 26 v. rated output, 60% duty cycle, roller base, integrated wire feeder, S/N AC558804.MILLER MDL. CP-200 MIG, 200 amp at 28 v. rated output, 100% duty cycle, Miller-matic 10E wire feeder, S/N HK218806.

WELDING EQUIPMENT & ACCESSORIESCUSTOM HOLLOW SPINDLE WELDING HEADSTOCK, 16" spndl. through hole, 3-jaw manual scroll chuck, variable spd. drive, roller stand.HYPERTHERM MDL. MAX100 PLASMA CUTTER, 100 amp at 80% duty cycle, plasma cutting torch, roller base, S/N N.A.(2) ACORN 5' X 5' WELDING PLATENS, assorted accessories, on heavy fabricated roller stands; SEVERAL H.D. FABRICATED WELDING TBLS.; WELDING SHIELDS; (2) OXY./ACY. TORCH UNITS w/bottle cart and gauges; ASSORTED TIG WIRE; ASSORTED MIG WELDING WIRE; H.D. FORGED STEEL C-CLAMPS.

6 7

AJAX TOCCO MDL. 5EA-60M TWIN SPINDLE SCANNING INDUCTION HARDENER

APEX BROACHING MACHINE

SPECIAL NOTEMachines marked at the end of their description as “Guelph” or “Emporium” will be sold by photo and can be inspected by appointment only. For an appointment and directions use following contacts:Emporium: Teutech LLC, 227 Barton Rd., Emporium, PA, USA, 15834 contact John Ricnafsky at (814) 486-1896, ext. 1.Guelph: Teutech, 265 Massey Road, Guelph, ONT, Canada, N1H 1B2 contact Brian Fatt at cell number 519-658-3383 or office (519) 836-3180.

ANN ARBOR 2-SPINDLE BORING MACHINE PRATT & WHITNEY VERTICAL SLOTTER

AUCTIONAt the Premises of

ANN ARBOR MACHINE5800 Sibley Rd., CHELSEA (Ann Arbor Area), MI 48118

(See Directions on Back Page)

MISCELLANEOUS MACHINERY

AJAX TOCCO TWIN SPINDLE SCANNING INDUCTION HARDENER, Mdl. 5EA-60M, S/N 99-1455-15, (Guelph).AJAX MAGNATHERMIC SCANNING INDUCTION HARDENING MACHINE, new 1999, s/n H2N54OD, (Emporium).PRATT & WHITNEY 12" VERTICAL SHAPER, Mdl. B, 24" built-in rotary tbl., S/N 927.ANN ARBOR TWIN SPINDLE PRECISION BORING UNIT w/Fibro 24" CNC rotary tbl.STAR MDL. VHS VERTICAL HOB SHARPENER, 3,600 RPM grinding spndl., S/N 11175. (2) NATIONAL RED RING MDL. GCI GEAR SHAVERS, S/N GCI-554, S/N GCI-2716.SUNNEN MDL. MBB1600MS HONE, large qty. of man-drels and stones, S/N 43634.BORNEMANN PROGRAMMABLE FOAM ROUTING MACHINE, programmable variable spd. spndl., large pattern tbl., cutters.APEX 15 T. CAP. VERTICAL SURFACE BROACHING MACHINE, pull down arrangement, front shuttle tbl., 60 HP unitized independent hyd. system. CUSTOM APPROX. 75 T. CAP. HYDRAULIC H-FRAME ARBOR PRESS, independent unitized hyd. system, adj. height bed, roller cylinder carriage.DAKE 50 T. CAP. AIR HYDRAULIC ARBOR PRESS, tbl. mechanism, S/N N.A.; DAKE 25 T. CAP. MANUAL H-FRAME ARBOR PRESS, Mdl. 25H, S/N 179326; POWERMATIC 20" PRODUCTION DRILL PRESS, Mdl. 1200, variable spd., on oil groove production tbl.;

DELTA 15" PEDESTAL DRILL PRESS, Catalog 15-260, S/N GU-625145N85; PYH 15" PEDESTAL DRILL PRESS, 1/2 HP motor, S/N 516356; WALKER TURNER 15" PEDESTAL DRILL PRESS, Mdl. 1113-41; CINCINNATI PEDESTAL GRINDER, 3 HP motor, H.D. cast iron base; CINCINNATI PEDES-TAL GRINDER, 1/2 HP motor, on fabricated steel base; SSC 6' X 12' PANEL SAW; KALAMAZOO 1" VERTICAL BELT SANDER; KALAMAZOO 6" TILTING TBL. VERTICAL BELT SANDER; KAR-RY PRE-CISION 1" BELT SANDER, moveable tbl., fabricated stand; DELTA 12" ABRASIVE CUT-OFF SAW; ROCKWELL MDL. 10 ABRASIVE CUT-OFF SAW, on fabricated stand; KALAMAZOO 12" ABRASIVE CUT-OFF SAW; BALDOR H.D. PEDESTAL GRINDER, 1 HP motor, cast iron stand; DELTA PRODUC-TION DRILL PRESS, 15" throat, oil groove production tbl., S/N 983616; (2) DAYTON 3/4 HP PEDES-TAL GRINDERS w/cast iron stand; ACCU-FINISH SERIES II WET CARBIDE LAPPING MACHINE; CUSTOM 2 CU. FT. VIBRATORY FINISHING MACHINE, w/controls.

8 9

<SHEFFIELD RS-50 DCC COORDINATE MEASURING MACHINES

>HINES SPINDLE

BALANCER

>ROCKWELL TYPE

HARDNESS TESTER

ANN ARBOR BOX SPINDLES

PRECISION INSTRUMENTS

PRECISION SURFACE PLATES

COORDINATE MEASURING MACHINES(2) GIDDINGS & LEWIS MDL. CORDAX RS-50DCC, 47" x 39" x 29" measuring range, “Measuremax” software, Renishaw PH10MQ motorized probe head, probe changer rack, TP2 probe set, S/N M-0049-05-97, S/N A-0963-0596.SHEFFIELD CORDAX 1808 MANUAL.BENDIX CORDAX, (Emporium).

PRECISION SPINDLE ASSEMBLY FACILITY

CONSISTING OF: HINES INDUSTRIES INC. PRECISION SPINDLE BALANC-ER; (3) MOTORIZED SPINDLE RUN-OUT BENCHES w/constant spd. or vari-able spd. drive motors, cast iron bases, assorted accessories; RSK PRECI-SION BENCH CENTER UNIT; LARGE QUANTITY OF DRIVE PULLEYS, BELTS AND ACCESSORIES.

SURFACE PLATESDELCVELSY 60" X 120" 4-LEDGE MASTER GRANITE SURFACE PLATE w/fabricated steel stand; COLLINS MICROFLAT 48" X 96" GRADE B GRAN-ITE SURFACE PLATE w/heavy fabricated steel stand; 48" X 72" CAST IRON SURFACE PLATE; COLLINS MICROFLAT 48" X 60" GRADE B GRANITE SURFACE PLATE; STARRETT 36" X 48" GRADE B PINK GRANITE SURFACE PLATE; 36" X 48" CAST IRON SURFACE PLATE; STARRETT 24" X 36" 4-LEDGE PINK GRANITE SURFACE PLATE; 36" X 48" GRAY GRANITE SUR-FACE PLATE w/fabricated steel stand; DOALL 24" X 36" GRADE 9 GRANITE SURFACE PLATE; SEVERAL SMALLER GRANITE SURFACE PLATES.

PRECISION INSTRUMENTSROCKWELL HARDNESS TESTER, w/accessories; JONES & LAMSON MDL. PC14 OPTICAL COMPARATOR; TELESIS PIN STAMP MDL. TMP1700 MARKING MACHINE, computer and accessories; MITUTOYO 12" HEIGHT-MASTER; LARGE SELECTION OF PRECISION PIN GAUGES up to .751"; PRE-CISION GROUND V BLOCKS; PRECISION VISES INCLUDING MOORE SPE-CIAL TOOL VISE; 1-2-3 BLOCKS; CHAMFER GAUGES; STEP BLOCKS; BEARING HEATER; MARPOSS AIR COLUMN GAUGES; PRECISION DE-VICES SURFACE GAUGE; FIBERLIGHT BORE GAUGE; TAYLOR-HOBSON SURFACE GAUGE; (2) MITUTOYO 18" DIAL TYPE HEIGHT GAUGES; STARRETT LONG STROKE 6" DIA. INDICATOR; VERNIER CALIBERS up to 40"; MITUTOYO, BROWN & SHARPE & LUFKIN MICROMETER SETS from 1" to 12"; ASSORTED ADJUSTABLE MICROMETERS w/anvils and standards; BROWN & SHARPE INTRIMIK BORE GAUGES; PRECISION MACHINE LEV-ELS; DEPTH MICROMETERS; STANDARD 3-WAY BORE GAUGES; SUNNEN BORE GAUGES; (5) SUNNEN PRECISION MICROMETER SETS; PRECISION BENCH CENTERS; SELECTION OF FEDERAL MAHR MAXUM DIGITAL INDI-CATORS; RING AND PLUG GAUGES; SNAP GAUGES.

CUTTING TOOLS & PERISHABLE TOOLING

LARGE QUANTITY OF TAPER SHANK DRILLS up to 3"; SINGLE AND DOU-BLE END ENDMILLS; EXTENDED LENGTH ENDMILLS; JOBBER LENGTH DRILLS; EXTENDED LENGTH TAPER SHANK DRILLS; ADJUSTABLE CHUCKING REAMERS; COUNTERBORES; TAPS; LETTER/NUMBER STEN-CILS; SHELL MILLS; SLOTTING SAWS; SIZE MILLING CUTTERS; SPADE DRILLS; MORE!

On-Site Bidding in Chelsea, Michigan, or

Bid Via Webcast at

8 9

ALFA LAVAL COOLANT SEPARATOR

PARKER HYDRAULIC FITTINGS

HUGE QUANTITY OF FASTENERS

CENTRIFUGAL COOLANT PUMPS

HIGH PRESSURE HYDRAULIC TUBING

PORTABLE HYDRAULIC UNITS

COOLANT SYSTEMS & COMPONENTS

ALPHA LAVAL MDL. MAPX309BGT-79-60/4094-18 COOLANT SEPARATOR; LARGE CAPACITY HENRY MDL. 2400SID2-2-10CS COOLANT FILTER w/sump, S/N 6088; HENRY MDL. 1000MV-54 COOLANT FIL-TER w/sump supplies, S/N 5747; APPROX. (20) HIGH CAPACITY CENTRIFUGAL COOLANT PUMPS, up to 50 HP drive, skid mtd., MP Pumps pump end; GORMAN-RUPP MDL. 89224-705 HIGH CAPACITY COOLANT PUMP (REBUILT); (3) GORMAN-RUPP MDL. T8A60-B SELF-PRIMING CENTRIFUGAL PUMPS; LARGE QUANTITY OF NEW SPRINKLER PIPE ANDSPRINKLER FITTINGS; VICTAULIC COU-PLINGS; TEES; ELBOWS; HANGER BRACKETS; (10) CLAWSON TANK JUMBO DRUM OIL STORAGE TANKS, approx. 500 gal. cap.; SUMP SUCKER, gaso-line pwrd., Yale elec. puller; MUCH, MUCH MORE!

ELECTRICAL SYSTEMS & COMPONENTS

(10) CONTROL CABINETS w/PLC controls, Fagor control interface panels, servo pack drives, power supplies, terminal strips, contactors and relays; ALLEN BRADLEY PLC UNIT; KINETIX 6000 SERVO AMPLIFIERS; SPINDLE AMPLIFIERS; ALLEN BRADLEY KINETIX 6000 MAIN BREAKER UNIT; PANELVIEW PLUS 1500 INTERFACE PANEL; (6) YASKAWA MDL. 656MR5 SERVO MOTORS; VARI-OUS INDRAMAT SERVO MOTORS w/pulse coders; WIDE ARRAY OF TRANSFORMERS up to 300 KVA, 460 delta cap., LARGE SELECTION OF NEW WIRE AND CABLE, various grades and configurations, solid and stranded, on spools; (2) U.S. ELECTRIC MO-TORS, 60 HP, 230 v./460 v., (NEW); (2) TICO WESTINGHOUSE MOTORS, 50 HP, 3-phase, 230 v./460 v.; SEVERAL LARGE RIGHT ANGLE GEAR BOXES.

MECHANICAL COMPONENTS

LARGE QUANTITY OF NEW AND USED MACHINING SLIDES; HARDENED AND GROUND SLIDE BASES w/prefinished and ground tops up to 24" travel and 40" x 60" slide base; ANN ARBOR MACHINE PRECI-SION BOX SPINDLES, various sizes and types; HUGE QUANTITY OF FASTENERS INCLUDING TAPER PINS, SOCKET HEAD CAP SCREWS, FLATHEAD SCREWS, WASH-ERS, NUTS, BOLTS AND SPACERS in sorted bags; BEARINGS, DRIVE BELTS.

HYDRAULIC SYSTEMS COMPONENTS

APPROX. (12) PORTABLE INDEPENDENT HYDRAULIC POWER SUPPLES – some w/directional valves and variable pump units, reservoir base, most on casters; (2) PORTABLE HYDRAULIC PIPE BENDING SYSTEMS w/assorted dies; RIDGID MDL. 300 PIPE THREADER; HYDRAULIC HOSE CUTTER; RIDGID MDL. 918 VICTAULIC PIPE GROOVER; PARKER HANNIFIN HY-DRAULIC HOSE SWAGING SET w/dies; HUGE QUANTITY OF NEW PARKER HY-DRAULIC FITTINGS in various sizes up to 1" and in all configurations; WIDE ARRAY OF PNEUMATIC CONTROL VALVES; HY-DRAULIC RESERVOIR TANKS; PARKER HANNIFIN H.D. LONG STROKE HYDRAULIC CYLINDERS; LARGE QUANTITY OF HIGH PRESSURE HYDRAULIC PIPING; WIDE SE-LECTION OF BLACK IRON PIPE, VALVES AND ACCESSORIES.

10 11OCE DRAWING SCANNING & PRINTING SYSTEM OFFICE CUBICLE

(2) GARDNER DENVER 100 HP ROTARY SCREW AIR COMPRESSORS PARTIAL VIEW OF RAW MATERIALS

AIR COMPRESSORS & ACCESSORIES (2) GARDNER DENVER MDL. AEUQPD ROTARY SCREW, 200 HP drive motor, 1,000 CFM capacity, S/N M-19675, S/N M44460, (Emporium).(2) GARDNER DENVER ELECTRA SAVER MDL. EAP99E ROTARY SCREW, new 1999, 100 HP drive motor, skid mtd., air cooled, noise enclosure, S/N SO47537, S/N SO82706.LEROI MDL. CUB30 ROTARY SCREW, 30 HP drive motor, 125 PSI operating pressure, 120 gal. horiz. tank, S/N 4225X202.INGERSOLL-RAND MDL. 30T RECIPROCATING, 15 HP motor, 120 gal. horiz. tank, mtd. to roller frame, S/N 30P-836829.SULLAIR MDL. 10B-40 ROTARY SCREW, 10 HP drive motor, 180 gal. horiz. tank, skid mtd., noise enclosure, S/N 003-58870.GARDNER DENVER MDL. RDS500A-4 REFRIGERATED AIR DRYER, RDS Series, 500 CFM cap., S/N 825-04-16-1999-5489.(2) HANKISON MDL. 801000 REFRIGERATED AIR DRYER, 1,000 CFM cap. S/N 0314A-3-8509-021, S/N 0314A-3-8509-16, (Emporium).

SPRAY PAINT BOOTHSIDE DRAFT 20'L. X 25' DP. X 12' HT., explosion proof lighting, draft sand, filter wall, 2-door design, fabricated construction.

RAW MATERIALCOLD ROLL AND HOT ROLL BAR INCLUDING 4027 AND 4130 GRADES; ASSORTED TOOL STEEL; STRESS PROOF BAR; FLATS; SQUARES; ROUNDS; HARDENED AND GROUND STOCK.

OFFICE FURNITURE & EQUIPMENTTOSHIBA TELEPHONE SYSTEM, approx. (60) Mdl. DKT2020-S handsets; OCE DRAWING SCANNING AND PRINTING SYSTEM; (5) OAK AND STEEL MANUAL DRAFTING TBLS.; (15) LARGE FLAT DRAWING FILES; ROLLER DRAWERS with bases; 4-DRAWER LETTER AND LEGAL STEEL FILE CABINETS; LARGE QUANTITY KEYBOARDS; PRINTERS; SPEAKERS; CALCULATORS.

ARE YOU SELLING YOUR PLANT? CALL 1-800-282-8466 FOR A CONFIDENTIAL CONSULTATION

On-Site Bidding in Chelsea, Michigan,

or Bid Via Webcast at

THURSDAY, MAY 21 • 10:00 A.M.

At the Premises of

ANN ARBOR MACHINE5800 Sibley Road, CHELSEA (Ann Arbor Area)

MICHIGAN 48118(See Directions on Back Page)

AUCTIONInspection at Ann Arbor Machine:

Wed., May 20, 9:00 A.M. to 4:00 P.M. & Morning of Sale

Inspection at Guelph & Emporium by Appointment Only

1999

10 11

>ROLLING

STOCK

PARTIAL VIEW OF FORKLIFTS

GMC TOP KICK FLATBED TRUCK

JLG SCISSOR LIFT

CHAINS & SLINGS CHEVROLET FLATBED TRUCK

FORKLIFTSCATERPILLAR MDL. TC100D, LP pwrd., 10,000 lb. at 24" load center, 178" lift height, 72" forks, cushion tires, S/N 5KB02838.DATSUN MDL. CFG105, LP pwrd., 5,000 lb. at 24" load center, 130" max. lift height, cushion tires, 60" forks, S/N 105-0046.(2) CATERPILLAR MDL. GC25, 4,700 lb. at 24" load center, 190" max. lift height, side-shifter, S/N 4EMO4361, S/N 4EMO6466.YALE MDL. GP030UAS079P, LP pwrd., 3,000 lb. at 24" load center, 118" max. lift height, 48" forks, S/N P314383.

MISCELLANEOUS MATERIAL HANDLING EQUIPMENT

JLG MDL. 2646E2 SCISSOR LIFT, new 1998, 26' platform height, self-propelled w/charger, S/N 0200046288; (2) DAVID ROUND & SON 1/2 T. X 8' FREE STANDING PEDESTAL JIB CRANES, 10' ht. under hook, Hitachi 1/2 T. cap. elec. chain hoist; (18) 1 CU. YD. AND 1-1/2 CU. YD. SELF-DUMPING HOPPERS, some w/caster base; H.D. STEEL SETUP TBLS.; WORKBENCHES; ROLLER CARTS; STEEL SHELVING; (34) 36" X 32" X 18" CORRUGATED TOTES, drop bottom design, stacking lugs, LARGE QUANTITY OF 30" PEDESTAL AND 36" ROLL-AROUND FLOOR CIRCULATING SHOP FANS; 40" X 54" X 32" DP. WASH CABINET w/pneu. agitator, (5) 5,000 LB. CAP. MANUAL PALLET JACKS; (2) 1 T. CAP. HYD. BOOMS CALDWELL FORK HANDLER for overhead cranes; LARGE QTY. OF FABRICATED STEEL HORSES – 24" to 48" ht. up to 60"L.; LISTA ROLLER DRAWER TOOL STORAGE CABINETS; CHAINS; SLINGS; HOOKS; EYE-BOLTS; BARREL TIPPERS; LADDERS; ROLLING STAIRCASES; SHELVING; SHOP FURNITURE; CARTS; SHOP VACUUM SYSTEMS; OIL TANKS; 2-WHEEL DOLLIES; PLATFORM CARTS; TRASH CANS, BROOMS, MUCH MORE!

ROLLING STOCKGMC TOP KICK STAKE BED TRUCK, new 1994, Eaton Fuller trans. w/2-spd. differen-tial, diesel engine, 1,418 lb. G.V.W.R., 24' flat deck w/rub rails and stake pockets, job box, tandem axle, Odo: 391,000 miles, MI Lic. No. AA71252, VIN 1GDS7H4J1SJ500330.CHEVROLET MDL. 3500HD – 1 T. CAP. FLATBED TRUCK, new 1999, auto. trans., front bench seat, 12' work deck bed w/rub rails and stake pockets, Odo: 268,000 miles, MI Lic. No. AA71253, VIN 1GBKC34J0XF064183. CHEVROLET CHEYENNE MDL. 3500 FLATBED TRUCK, new 1996, auto. trans., front bench seat, 12' wood stake bed w/stake pockets, MI Lic. No. CC50361, VIN 1GVJC34R4VF018094.GMC MDL. 2500 PICKUP TRUCK, new 1997, 3,901 lb. G.V.W.R, auto. trans., Odo: 256,000 miles, MI Lic. No. CB13618, VIN 1 GTGC24R3VZ549074.CHEVROLET MDL. 2500 – 3/4 T. CAP. PANEL VAN, new 2000, 8,600 lb. G.V.W.R., extended wheel base, auto. trans., Odo: 357,000 miles, MI Lic. No. CB13620, VIN 1GCGG29RX11112596.CHEVROLET MDL. 2500 – 3/4 T. CAP. PANEL VAN, new 1999, 8,600 lb. G.V.W.R., auto. trans., Odo: 230,000 miles, MI Lic. No. CB13621, VIN 1GCGG25R3X1115631. GMC MDL. 1500 SUBURBAN, new 1997, 7,300 lb. G.V.W.R., auto. trans., SLT trim package, Odo: 259,000 miles, MI Lic. No. BEJ7514, VIN 1GKFK16R7WJ718619.CHRYSLER CONCORD MDL. LXI SEDAN, new 1998, auto. trans., leather interior, pwr. windows, pwr. driver’s seat, MI Lic. No. BJJ4988, VIN 2C3HD46JXWH212461.

PROXY BIDSIf you cannot attend this sale we will bid on your behalf. Contact Houston office at (713) 691-4401 for instructions, or go to our website at www.pmi-auction.com.

QS-0000519

PresortedFirst Class Mail

U.S. PostagePAID

Eugene, OregonPermit No. 17

PRECISION MACHINE TOOL MANUFACTURING PLANT CLOSING, PLUS

Equip. in Guelph, Ontario, Canada & Emporium, PA, USA to Be Sold by Photo From the Ann Arbor Machine Sale Site

Featuring: CNC & Conventional Jig Mills, CNC Vert. Machining Centers, CNC Turning Centers,

CNC Horiz. Machining Centers, CNC Universal Cylindrical Grinder, Punching & Drawing Press,

Grinders, Lathes, Mills, Saws, Welders, Induction Hardening & Brazing Equip., Q.C. & Precision Measuring Instruments, Huge

Machine Tool Component Part Inventory, Huge Qty. of Plant Support Equip., Air Compressors Up to

200 HP, Rolling Stock, Offices, Much More!

PUBLIC INVITEDTHURSDAY, MAY 21 • 10:00 A.M.

ATTENTION: PLANT MANAGEROR EQUIPMENT BUYER

CHELSEA (Ann Arbor Area)MICHIGAN

AUCTION

P.O. Box 19100Houston, TX 77224-9100

DATED MATERIAL – PLEASE DELIVER

A 12% Buyer’s Premium Will Apply On-site.A 15% Buyer’s Premium Will Apply to Webcast Bids. See Above Rules for Participation.Everything will be sold to the highest bidder or bidders for cash in accordance with the auctioneer’s Customary Terms of Sale, copies of which will be posted on the premises.ALL PAYMENTS MUST BE MADE BY CASH, CASHIER’S CHECK, WIRE TRANSFER OR COMPANY CHECK WITH BANK LETTER GUARANTEEING PAYMENT TO PLANT & MACHINERY INC.Here is an example of what your letter should be: Mr. “Customer Name” is a customer of this bank. This bank will guarantee unqualified payment to PMI on the account listed herein up to the amount of $ . This letter is good until June 19, 2009.In default of payment of bills in full within the time therein specified, the Auctioneer in addition to all other remedies allowed by law, may retain all monies received as deposit or otherwise, as liquidated damages. All items must be removed by the time announced at the start of the sale.Lots not paid for and/or removed within the time allowed may be resold at public or private sale without further notice, and any deficiency, together with all expenses and charge of resale, will be charged to the defaulting purchaser.The buyer acknowledges that he or an agent has inspected all of the assets upon which he will be bidding and/or does purchase.

Buyer agrees to accept assets purchased “AS IS,” “WITH ALL FAULTS” and “WITH REMOVAL AT BUYER’S RISK AND EXPENSE.” THE AUCTIONEER EXPRESSLY DISCLAIMS ON THE PART OF THE AUCTIONEER AS AGENT AND THE SELLER, ANY WARRANTY AS TO FITNESS OR USABILITY OF ALL THE ASSETS, AND THE BUYER EXPRESSLY WAIVES ANY CLAIM IN RESPECT TO ANY POSSIBLE FUTURE USE OF ANY ASSET PURCHASED FOR ANY PURPOSE WHATSOEVER.The buyer does hereby assume and does agree to indemnify and hold the auctioneer harmless form any future claim which shall pertain to the fitness or use of that asset as being purchased. Riggers, movers, electricians and buyers performing work at the Auction Site must provide PMI with evi-dence of insurance. The insurance coverage must be at a level acceptable to PMI and to the seller. PMI reserves the right to withdraw items, alter the order of the sale, accept bids from the seller, and group lots as it may deem appropriate.Although all information has been obtained from sources deemed reliable, the auctioneer and seller make no warranty or guarantee, expressed or implied, as to the accuracy of the information herein contained, or contained in our catalog. It is for this reason that buyers should avail them-selves of the opportunity to make inspection prior to the auction. Although it is not likely, auction sales are subject to cancellation or postponement. Kindly contact auctioneer prior to attendance.These terms and conditions may be modified or supplemented by language in the catalog avail-able at the sale site or by announcement at the start of the sale. Bidders should be attentive to those announcements and to the catalog language.

TERMS & CONDITIONS

DIRECTIONS TO ANN ARBOR SALE SITE

FROM THE DETROIT METRO WAYNE COUNTY AIRPORT: Follow signs out of airport to Interstate 94. Take I-94 W toward Chicago. Proceed on I-94 west for approx. 39 miles to Exit 159 for MI-58 N/Chelsea/Stockbridge. Take jug-handle exit around to MI-58 and turn left (north) onto MI-58. Proceed approx. 2 miles to Sibley Road. Turn left (west) onto Sibley and plant entrance is just ahead on your left. Watch for auction signs. (Total estimated trip time: 45 minutes.)

DIRECTIONS FOR GUELPH, ONTARIO, CANADA

For an appointment and directions contact Brian Fatt at cell: (519) 658-3383 or office: (519) 836-3180, at Teutech, 265 Massey Road, Guelph, ONT, Canada, N1H 1B2

DIRECTIONS FOR EMPORIUM, PA, USA

For an appointment and directions contact John Ricnafsky at (814) 486-1896, ext. 1, at Teutech LLC, 227 Barton Rd, Emporium, PA, USA, 15834.

LODGINGComfort Inn . . . . . . . . . . . . . . . . . . . (734) 433-80001645 Commerce Park Drive, Chelsea, MIHoliday Inn Express. . . . . . . . . . . . . (734) 433-16001540 Commerce Park Drive, Chelsea, MIFairfield Inn . . . . . . . . . . . . . . . . . . . (734) 995-52003285 Boardwalk, Ann Arbor, MI

PROXY BIDSIf you cannot attend this sale we will bid on your behalf. Contact Houston office at (713) 691-4401 for instruc-tions, or go to our website at www.pmi-auction.com.

UNABLE TO ATTEND?Bid on-line in real time atTO PARTICIPATE YOU MUST:

1. Register at www.BidSpotter.com. DO IT NOW. 2. Either wire transfer, or mail a cashier’s check deposit in

the amount of $3,000 to: Plant & Machinery, Inc. P.O. Box 19100, Houston, TX 77224-9100 If you are using FedEx or another delivery service: 2901 W. Sam Houston Pkwy. N., Suite A-130, Houston, TX 77043, (713) 691-4401

You must be registered and have your deposit in the hands of Plant & Machinery, Inc. at least 24 hours prior to the start of the auction. Failure to register and/or failure to send your deposit to Plant & Machinery, Inc. may disqualify you from bidding. DON’T WAIT.

If you need assistance, don’t hesitate to call (713) 691-4401. ALL WEBCAST BIDS ARE SUBJECT TO A 15% BUYER’S PREMIUM.