Attrition Mill - Superior Industries · Rock Face to Load Out® 47 Attrition Mill Material on...
Transcript of Attrition Mill - Superior Industries · Rock Face to Load Out® 47 Attrition Mill Material on...
![Page 1: Attrition Mill - Superior Industries · Rock Face to Load Out® 47 Attrition Mill Material on Material Scrubbing Breaks Down and Removes Unwanted Deleterious Material From Sand CRUSHING](https://reader030.fdocuments.us/reader030/viewer/2022040212/5e809c4ad4972764113b502f/html5/thumbnails/1.jpg)
47Rock Face to Load Out®
Attrition MillMaterial on Material Scrubbing Breaks Down and Removes Unwanted Deleterious Material From Sand
CRUSHING CONVEYINGSCREENING COMPONENTS CONSTRUCTIONWASHING PLANTS AFTERMARKET
FEATURES » Flow pattern eliminates swirling, improves efficiency.
» Extra large access door eliminates parts removal to access tub.
» Impellers designed with direct drive, which cuts HP.
» Modular design for quick capacity upgrades
» Easily replaced baffle plates
APPLICATIONS » Disintegration of agglomerates
» Sand surface cleaning and polishing
» Separation of unwanted material
» Improve crushing test results
Patent Pending
![Page 2: Attrition Mill - Superior Industries · Rock Face to Load Out® 47 Attrition Mill Material on Material Scrubbing Breaks Down and Removes Unwanted Deleterious Material From Sand CRUSHING](https://reader030.fdocuments.us/reader030/viewer/2022040212/5e809c4ad4972764113b502f/html5/thumbnails/2.jpg)
48 Superior Industries
FEATURES
SPECIFICATIONS
04
09
01
02
03
05
08
07
06
09
Outside Diameter (mm) 54” (1,370)
Tank Height (mm) 72” (1,830)
Capacity (MTPH) 75 TPH (67)
Retention Time 2.5 minutes
Inlet urethane lined (mm) 24” x 24” (610 x 610)
Outlet urethane lined (mm) 16” (405)
Inspection Door (mm) 42” x 42” (1,065 x 1,065)
Cleanout Pipe (mm) 3” flanged (75)
Impellers (mm) 2” urethane coating (50)
Overflow Weir Adjustable
SPLT1007ENPR-03
01/ WEAR LINERS
Standard 1” (25mm) weld in liners or optional replaceable bolt in style.
02/ ACCESS DOORExtra large hinged access door with gasket seal.
03/ STEEL BAFFLESOptimize material flow and pin or unpin for easy replacement.
04/ OVERFLOW WEIRLocated at discharge, adjustable height feature controls depth of slurry mixture.
05/ FEED BOXIn-feed box with wear liners.
06/ ROUND TUBNo dead flow zones or corners for material to collect.
07/ DIRECT DRIVEReduces maintenance, electricity and lowers operating cost.
08/ IMPELLERToolless attachments are coated in 2” (50mm) of urethane.
09/ CHEMINEER GEARBOXHigh-efficiency design specifically for agitator service.