at&t rugby pro quick guide

Samsung Galaxy Rugby Pro™

ENHANCED PUSH-TO-TALK (P!)Walkie-talkie-like instant voice communication on ultrafast 4G/4G LTE network.

BUILT TOUGHRugged, shock and water resistant, dustproof* design to handle whatever life throws your way.

4” SUPER AMOLED DISPLAYWVGA Super AMOLED™ touchscreen for clarity and vibrant colors.

Introducing AT&T’s Enhanced Push-to-Talk ServiceNow available for rental at Champlin Wireless Communications.

Champlin Wireless Communications

(888) 845-4950 www.champlinwireless.com

http://www.champlinwireless.com



Ba"ery Capacity1850 mAh li-ion Talk timeUp to 11 hours

Standby timeUp to 12 days

Dimensions Size (inches)5.04 x 2.72 x 0.51 Weight4.6 ounces

Wireless Technology 4G LTEBand 4 and 17 4GHSPA+ with enhanced backhaul 3G - UMTS850/1900/2100 MHz

GSM/GPRS/EDGE850/900/1800/1900 MHz Wi-Fi® connectivity802.11 a/b/g/n Near Field Communication (NFC)Open, Secure BLUETOOTH® technology4.0 Mobile hotspot*Up to 10 devices FOTA capable - upgrade Firmware Over "e Air

Keyboard Touchscreen






• Create large contact lists with up to 1,000 contacts

• Conduct a group call with up to 250 people simultaneously with the push of a bu#on

• Choose from a broad selection of smartphones, feature phones, rugged phones and specialty devices

• Talk and use productivity applications simultaneously

• See who’s available to talk now with AT&T Enhanced P$’s presence status indicators

• Allow supervisors to override P$ calls in order to communicate important, time- sensitive messages to their teams

• Access AT&T’s expansive 3G, 4G and 4G LTE networks

• Use mobile applications, GPS or cameras on your phones during P$ calls

With Enhanced P! you can:







Front Back

Power/Lock

Earpiece

Customizable key

Volume

Noti#cations bar

Home

Menu

Back

3.5 mm headsetconnector

Speaker

Ba"ery cover lock

Micro USB port -charging
















Powering on and accessing the Push-to-Talk service:1.Power on - press and hold side button 1.

2.Unlock Screen: swipe finger from left to right across the screen

3.AT&T EPTT: press and release the icon on your screen

4. NOTE: Waking phone from sleep mode: press and release side button 1, then follow steps 2&3

1. Power on = Press and hold2. Wake = Press and release

1 2

2. Swipe #nger across screen

3

3. Press and release the icon on your screen for AT&T EPTT

Look for the P! iconon your Rugby Pro.

Wa k e&

Po w e r o n / o f f






1. Contacts: Option 1

2. Groups: Option 2

1contacts

2g r o u p s


Accessing your P! contacts, and Groups:

1. Locate Contact: Swipe finger on the screen in the direction you would like to scroll

2. Select Contact: press and release the contact name

Initiating a P! call:

s w i p e f i n g e r o n t h e s c r e e n i n t h e d i r e c t i o n y o u w i s h t o s c r o l l





1. Send Alert: Press and release “send alert” on the bottom left

2. Wait for Reply

3. After reply: your mic will be green

4. To Reply: Press and hold the Green microphone button to talk, release to listen

5. Opt 2 for PTT: press and hold the button on the top left of the phone, release to listen


Initiating a P! call:

s e n d a l e r t

g reen P TT

bu tto n

p r e s s a n d h o l d

t o t a l k

Send Alert





1. Press and hold to transmit PTT call, release to listen

2. On main screen, press and release to access PTT menu


Short cut key on the top le" side of the phone

2 Functions:Cu s t o m i z a b l e k e y :

S e t f o r P T T c a l l s





Enhanced P! Call in Progress Enhanced P! Client Enhanced P! Presence Options Enhanced P! Groups


Sample Screens






Sample of call in progress






6

Section 1: Getting Started

This section explains how to start using your phone by first configuring your hardware, activating your service, and then setting up your voice mail.

Setting Up Your PhonePrior to use it is necessary to install both the battery and SIM into their corresponding internal compartments. The microSD™ card slot is also located in this same internal area.

1. Use a coin or other object inserted in the slot on the back cover and turn it counter-clockwise to unlock the battery cover.

2. Remove the back cover by inserting a fingernail into the slot on the top of your phone (1).

3. Lift the cover up (2) and away from the phone (3).

Lock

Unlock

Accessing your ba!ery:







Getting Started 9

For more information on Memory Cards, see “Memory Card” on page 42.

Installing the Back Cover1. Place the battery cover onto the back of the phone (1)

and press down (2).

2. Press along the edge of the back cover (3) until you have a secure seal.

Important! When placing the cover back on the phone, press down firmly along the edges to ensure that the cover is flush with the phone. This will ensure that the battery compartment is pressurized and that the phone is waterproof.


Replacing Ba!ery cover:





10

3. Use a coin or other object inserted in the slot on the back cover (A) and turn it clockwise to lock the battery cover (B).

Note: Make sure the battery is properly installed before switching on the phone.

Charging a BatteryYour device is powered by a rechargeable Li-ion battery. The Travel Charger that is used to charge the battery, is included with your device. Use only Samsung-approved batteries and chargers.

Note: You must fully charge the battery before using your phone for the first time. A discharged battery recharges fully in approximately 4 hours.

Note: Long backlight settings, searching for service, vibrate mode, web browser use, and other variables may reduce the battery’s talk and standby times.

Although you can use the phone while the battery is charging, doing so will require additional charging time.

Using the Travel Charger

Important! Verify that the handset battery is installed prior to connection. If the battery is not properly installed and the wall charger is connected, the handset may power off and on continuously, preventing proper operation.

A

B


Locking back cover:





Getting Started 11

1. Plug the flat end of the Travel Charger into the Power/Accessory Interface connector and the other end into a standard AC wall outlet.

2. When charging is finished, remove the flat end from the interface connector jack on the phone.

Warning! If your handset has a touch screen display, please note that a touch screen responds best to a light touch from the pad of your finger. Using excessive force or a metallic object when pressing on the touch screen may damage the tempered glass surface and void the warranty. For more information, refer to “Standard Limited Warranty” on page 205.

Note: Failure to unplug the wall charger before you remove the battery, can cause damage to the phone.

Low Battery IndicatorWhen the battery is weak and only a few minutes of talk time remain, the battery icon ( ) blinks and the device sounds a warning tone at regular intervals. In this condition, your phone conserves its remaining battery power, not by turning off the backlight, but by entering the dimming mode. For a quick check of your battery level, glance at the battery charge indicator located in the upper-right corner of your device’s display. Solid color ( ) indicates a full charge.When the battery level becomes too low, the phone automatically turns off.

Incorrect

Correct


Charging your phone:






12

Switching the Phone On or Off1. Press and hold until the phone switches on.

2. Sweep your finger across the screen to unlock the phone.

Note: The display language is preset to English at the factory. To change the language, use the Language menu. For more information, refer to “Changing Your Settings” on page 106.

3. To switch off the phone, press and hold , until the Device options screen displays.

4. Tap Power off to switch off the phone.5. At the Power off prompt, tap OK.

Locking and Unlocking the Touch Screen

1. Press to lock the touch screen.2. Press again to display the main screen then

sweep your finger across the screen to unlock.

Configuring your PhoneWhen you first turn on your phone, you will need to set up a few things.

1. The Welcome screen displays. The default language for your phone is English. If you would like to select another language, tap English and select one of the listed languages.

2. Tap Start to begin.The Make it Google screen is displayed.

3. If you already have a Google account, tap Sign in, otherwise, tap Get an account and follow the onscreen instructions to create a Google account. You can also tap Not now if you want to create an account later.


Power on / Power off













Champlin Wireless Communications, inc2332 4th Street, Suite A

Berkeley, CA 94710Phone: (510) 647-8274

Toll Free: (888) 845-4950

[email protected]



mailto:[email protected]

mailto:[email protected]

at&t rugby pro quick guide

Documents

Transcript of at&t rugby pro quick guide