ATSC 3.0 Broadcasting Simulator...AMM Studio is the integrated equipment which can Analyze ATSC 3.0...
8
© ATBIS Co., Ltd. All Rights Reserved. AMM Studio (All-in-One Solution) ATSC 3.0 Broadcasting Simulator
Transcript of ATSC 3.0 Broadcasting Simulator...AMM Studio is the integrated equipment which can Analyze ATSC 3.0...
© ATBIS Co., Ltd. All Rights Reserved.
AMM Studio(All-in-One Solution)
ATSC 3.0 Broadcasting Simulator
© ATBIS Co., Ltd. All Rights Reserved.
Introduction
Title1 삽입
Title1 삽입
AMM Studio>
All in One Broadcasting simulator
High-end Level
Analyze, Generating
Editing and Auto Testing
AMM Studio is the integrated equipment which can Analyze ATSC 3.0 DASH/ROUTE,
MMTP stream, Modifying and Transmitting immediately. (DASH/ROUTE, MMTP Analyzer,
Editor, RF Generator unified and supports all digital broadcasting specifications)
AMM Studio support creating, deleting, modifying functionality for STL TP & Live IP Input.
User defined test pattern with variety parameters can be created. (L1 Setting & PLP Setting,
Signaling(LLS, SLS) Edit, ESG Edit, Captions & Subtitles(TTML/IMSC1) Edit, MPLP(TDM, FDM,
LDM), L2 LMT Edit, Multi Subframe)
And AMM Studio support variety situations that occur in actual field.
AMM Studio can be used for development, Quality Control and mass production.
Supporting specifications: ATSC 3.0
AMM Studio and Signal Generator
No.1 Broadcasting and Telecommunications Solution leader
© ATBIS Co., Ltd. All Rights Reserved.
Main Characteristics
Features
Intended Application
• Standard : ATSC3.0
- MMTP, DASH/ROUTE
• RF Output Frequency : 36 ~ 860MHz
• Easy Channel Selection by Channel Table DB
• L1 Setting & PLP Setting Support
• STL TP Support
• Signaling(LLS, SLS) Edit Support
• Live Input Support(Gigabit Ethernet)
• SFN Support(Future Support)
• Multi Sub-frame
• ESG Edit Support
• Captions & Subtitles(TTML/IMSC1) Edit Support
• MPLP(TDM, FDM, LDM), L2 LMT Edit Auto setting Support
• UHD & HD TV Chip R&D
• UHD & HD TV Design House
• Set-top Box R&D and QC
• S/W QC Dept.
• Broadcasting Transmission
AMM Studio and Signal Generator
© ATBIS Co., Ltd. All Rights Reserved.
User Interface
Main User Interface
After Loading PCAP File/ SLS&LLS Edit
User Interface AMM Studio and Signal Generator
© ATBIS Co., Ltd. All Rights Reserved.
User Interface
Error message of Wrong setting
System Diagram
AMM Studio and Signal Generator
AMM Studio(All-in-One) System Diagram
File(STL TP) & Live IP
ALP setting
All-in-One Solution(AMM Studio)
RF Out
Save
Modulating
L1/PLP Setting
Signaling setting
Create STL TP
© ATBIS Co., Ltd. All Rights Reserved.
Operating Specification
Specification
RF Specification
• Output Connector : SMA(F) Type
• RF Output Frequency : 36 ~ 860MHz
• RF Frequency Resolution : 1Hz
• Frequency Accuracy : 3 x 10-6 / 25
• RF Power Level : 0 ~ -110dBm
• RF Level Resolution : 0.1dB steps
• RF Level Accuracy : ±0.5dB relative to the level at 18-33
• RF Impedance : 50 Ω
External Interface
• Resolution : 1280 x 1024
• Power supply : AC 100 to 240V, 50/60Hz
• Power consumption : Less than 400W
• Operating temperature : 10 to 40
• Operating humidity : 20 to 85% RH (No Condensation)
• Guaranteed temperature : 15 to 35
• Guaranteed humidity : 20 to 85% RH (No Condensation)
• Storage temperature : -40 to +70 / 20 ~ 85% RH
• Operating environment : Indoor
• Operating attitude : Around 2000m
• Over-voltage category : II
• Pollution degree : 2
• Dimensions : 423 (W) x 345.5(H) x 243(D) mm
• USB Interface : USB HDD, USB Stick
• Ethernet : Gigabit LAN
OS System
• Windows 7 OS
AMM Studio and Signal Generator
© ATBIS Co., Ltd. All Rights Reserved.
Ordering Information AMM Studio and Signal Generator
Notice
* All Specifications and Features are subject to be changed without notice
Base & Options Description Notes
BASEAMM
STUDIO BASE
• Portable Frame of 1280 x 1024
• RF Frequency Range: 36 ~ 860MHz
• RF Power Level : 0 ~ -110dBm
• Frequency Resolution : 1Hz
• RF Level Resolution : 0.1dB steps
• ATSC 3.0 standard support
• ATSC 3.0 Signal Generator
• LLS, SLS Edit support
Function Option
FM-EE • ESG Edit
FM-ST • SFN Test
FM-LDM • LDM Function
© ATBIS Co., Ltd. All Rights Reserved.
GUANGLIN WU(吴光林)
Rm. 78058, 7/F, Seat C, China High-Tech Building No.2076 Yueliangwan Road Nanshan District
Shenzhen, 518054 CHINA
深圳市南山区月亮湾大道2076号 高科集团大楼C栋7楼78058
Mobile: +86-15989471718, +86-18926001978
E-mail : [email protected]
www.atbis.cn
ATBIS Co., Ltd.
#1603 5th. Ace High-end Tower, 226, Gasan Digital 1-ro, Geumcheon-gu, Seoul, Korea
Tel : +82-70-4821-4888 FAX : +82-70-4821-4898
E-mail : [email protected]
Head Office Contact Information
China Branch Contact Information
