ATR 42/72 - 2013 - Thales Group · PDF fileATR THALES AVIONICS ELECTRICAL SYSTEMS TECHNICAL...

1

2013 TAES – TECHNICAL PUBLICATION

Issued: January 2013

ATR

THALES AVIONICS ELECTRICAL SYSTEMS

TECHNICAL PUBLICATION

ATR 42/72

- 2013 -

THALES

- CUSTOMER SUPPORT DEPARTMENT - 41 boulevard de la République – B. P. n° 53 - 78401 CHATOU CEDEX - FRANCE

Tel : 33 1 34.80.73.46 Fax : 33 1 34.80.75.95 E-Mail : [email protected]

mailto:[email protected]

2



ATR

APPLICABLE TECHNICAL PUBLICATION

1. General conditions 2. List of LRU’s 3. Details of evolutions 4. Statement of agreement

3



ATR 1. GENERAL CONDITIONS CMM : Component Maintenance Manual. TCMS : Technical Characteristics Maintenance Sheet. SB : Service Bulletin SIL : Service Information Letter

Technical Publications (CMM/SB/SIL) are available. To obtain the sale conditions, contact your Commercial Contact. Prior to the delivery of a CMM, the customer shall sign a Statement of Agreement. 2. LIST OF LRU’S

THALES vendor code TAES P/N DESCRIPTION Electroni

c Rotable Qty per plane Applicability

F0296 156 Transformer E 2 All ATR

F0296 102-003-11 DC Generator Control Unit E 2 All ATR

F0296 103-003-2 (-11) Hall Effect Current Sensor (HECS) E 5 All ATR

F0296 105-003-2

105-003-1DC Bus Power Control Unit E 1 All ATR

F0296 20032-2 Alternator R 2 All ATR

F0296 20732 Transformer (DPCT) E 3 All ATR

F0296 2432-11

2432-30AC Generator Control Unit E 2 All ATR

F0296 559-012A 559-012B

559-012C 559-012DStatic Inverter E 2 All ATR

F0296 680-0040-000 Emergency axe - 1 All ATR

F0296 8260-123

8260-121DC Starter Generator R 2 All ATR

F0296 945-12

945-11AC Bus Power Control Unit E 1 All ATR

F0296 F11NA3121 Transformer Rectifier Unit E 1 -500 and ETOPS only

F0296 F46BC0101

F46BD0101Control Box E 1 All ATR

F0296 F96GA0102

F96GA0101Landing Gear Control Lever E 1 All ATR

F0296 B3893-000DC-STAR GSE - Direct Current

System Tester Analyzer Recorder Ground Support Equipment

E / All ATR

4



ATR 3. DETAILS OF EVOLUTIONS

STARTER-GENERATOR P/N 8260-121 CMM reference : 24-32-61 Revision 10 : Date of update February, 09th 2012

Evolution Reason Application In

Productionsince

SB SIL

/ Brush and bearing replacement

Mandatory during brush and bearing replacement

/ / SIL8260-120-005

Rev.7 dated 03/09/2009

/

Recommendation to ATR operators in order to avoid abnormal MTBUR

Operation, Maintenance,

storage, transportation,

handling.

/ / SIL8260-12X-24-007dated 04/1995

/ Recommended scheduled maintenance

/ / / SIL8260-12X-24-009

Rev. 3 dated 06/04/2006

/

Brush check procedure with S/G fitted on engine.

/ / / SIL8260-12X-24-010

Rev.1 dated 09/09/2009

/ Brush replacement procedure

Mandatory during brush replacement

/ / SIL8260-12X-24-011

Rev. 2 dated 10/07/2009

/ Speed sensor tightening procedure.

During each speed sensor assembling operation

/ / SIL8260-12X-24-012

Rev 1 dated 13/11/2009

/

Brush and bearing replacement without disassembly of the S/G.


/ / SIL8260-12X-24-013 dated 05/06/2009

/ Packaging for Starter Generator

Recommended for shipment / / SIL8260-12X-24-014

dated 09/07/2009

/ Armature information Recommended / / SIL8260-12X-24-015

dated 09/11/2011

/ Checking of the torque shaft Recommended / / SIL8260-12X-24-016

dated 10/12/2012

/ Order consumables products

Recommended / / SIL24-99-001 dated 03/01/2011

5



ATR


Productionsince

SB SIL

/ Second source of Anti-flash varnish Recommended / / SIL24-99-003

dated 05/09/2012

Amendment A, B & C / Do not exist for

this unit / / /

Amendment D Improvement of reliability

Recommended under repair 1989 SB8260-120-24-007

dated 03/08/1992 /

Amendment E Improvement of reliability

During repair if component has to be replaced & Recommended during overhaul.

1990 SB8260-120-24-006 dated 10/12/1990 /

Amendment F Improvement of reliability

During repair if component has to be replaced

1991 SB8260-120-24-005

Rev. 1 dated 12/04/1991

/

Amendment G Improvement of reliability


1994 / /

Amendment H Improvement of reliability


1998 SB8260-12X-24-008

Rev. 1 dated 21/12/1998

/

Amendment J Improvement of reliability


1998 SB8260-12X-24-009

Rev. 1 dated 21/12/1998

/

Amendment K Improvement of reliability During overhaul 1998 SB8260-12X-24-010

dated 28/10/1997 /

8260-123 Improvement of scheduled maintenance

On customer request 2000 SB8260-12X-24-011

dated 21/12/1998 /

Amendment M Conformity Mandatory during overhaul 2000

SB8260-12X-24-012 Rev. 1

dated 09/08/1999 /

Amendment N Improvement of reliability


2003 SB8260-12X-24-013 dated 17/12/2002 /

/ Overhaul procedure

Mandatory during overhaul /

SB8260-12X-24-014 Rev. 1

dated 07/04/2004 /

Amendment P Component obsolescence


Only under repairsince 2006

SB8260-12X-24-016 dated 17/12/2004 /

Amendment R Improvement of reliability


2012 SB8260-12X-24-017 dated 12/11/2012

6



ATR

STARTER-GENERATOR P/N 8260-123 CMM reference : 24-32-61 Revision 10 : Date of update February, 09th 2012


Productionsince

SB SIL

/ Brush and bearing replacement


/ / SIL8260-120-005

Rev.7 dated 03/09/2009

/

Recommendation to ATR operators in order to avoid abnormal MTBUR

Operation, Maintenance,

storage, transportation,

handling.

/ / SIL8260-12X-24-007dated 04/1995

/ Recommended scheduled maintenance

/ / / SIL8260-12X-24-009

Rev. 3 dated 06/04/2006

/

Brush check procedure with S/G fitted on engine.

/ / / SIL8260-12X-24-010

Rev.1 dated 09/09/2009

/ Brush replacement procedure

Mandatory during brush replacement

/ / SIL8260-12X-24-011

Rev. 2 dated 10/07/2009

/ Speed sensor tightening procedure.

During each speed sensor assembling operation

/ / SIL8260-12X-24-012

Rev 1 dated 13/11/2009

/

Brush and bearing replacement without disassembly of the S/G.


/ / SIL8260-12X-24-013 dated 05/06/2009

/ Packaging for Starter Generator

Recommended for shipment / / SIL8260-12X-24-014

dated 09/07/2009

/ Armature information Recommended / / SIL8260-12X-24-015

dated 09/11/2011

/ Checking of the torque shaft Recommended / / SIL8260-12X-24-016

dated 10/12/2012



/ Second source of Anti-flash varnish Recommended / / SIL24-99-003

dated 05/09/2012

7



ATR


Productionsince

SB SIL

Amendment A Improvement of reliability


2000 SB8260-12X-24-008

Rev. 1 dated 21/12/1998

/

Amendment B Improvement of reliability


2000 SB8260-12X-24-009

Rev. 1 dated 21/12/1998

/

Amendment D Conformity Mandatory during overhaul 2000

SB8260-12X-24-012 Rev. 1

dated 09/08/1999 /



2003 SB8260-12X-24-013 dated 17/12/2002 /

/ Overhaul procedure

Mandatory during overhaul /

SB8260-12X-24-014 Rev. 1

dated 07/04/2004 /

Amendment F Component obsolescence


2006 SB8260-12X-24-016 dated 17/12/2004 /



2012 SB8260-12X-24-017 dated 12/11/2012

AC GENERATOR P/N 20032-2 CMM reference : 24-22-61 Revision 4 : Date of update May, 30th 2008


Productionsince

SB SIL

/ Verification of measurement Under repair / / SIL20032-X-24-003

dated 06/1993

/ Verification of torque value

On aircraft Under repair / / SIL20032-2-24-007

dated 28/09/2004

/ Improvement of reliability

Under repair (overhaul or

bearing replacement)

/ / SIL20032-2-24-008dated 24/03/2005



8



ATR


Productionsince

SB SIL

Amendment A Component obsolescence


1988 SB20032-2-24-002 dated 15/02/1992 /


During repair of rotating diodes

bridges. 1988 / /

Amendment C Improvement of repair procedure

Under repair only if rewinding

of stator is necessary


/ /


On customer request

or if component

has to be replaced

(P058137)

1998 / /


Recommended /On customer

request or if component

has to be replaced

(P058137 or P058137A)

1999 SB20032-2-24-009

Rev. 1 dated 03/04/2008

/



1999 SB20032-2-24-005 dated 21/12/1998 /



1999 SB20032-2-24-006 dated 21/12/1998 /

Amendment H

Improvement of reliability & assembly procedure.


2004 SB20032-2-24-007 dated 04/12/2002 /

Amendment J

Improvement of reliability & assembly procedure. Qualification of a new source.

During repair if component has to be replaced(Diode-holder plate assy.)

2007 SB20032-2-24-008

Rev. 1 dated 03/04/2008

SIL20032-2-24-009 Rev 1

dated 31/03/2008

Amendment K Improvement of reliability


2012 SB20032-2-24-010 dated 27/01/2012

9



ATR

AC GCU P/N 2432-11 CMM reference : 24-22-14 Revision 4 : Date of update September, 30th 1999


Productionsince

SB SIL



/

Electrostatic Discharge Sensitive Components



Mandatory during repair by

OEM only 1988 SB2432-11-24-002

dated 15/02/1992 /


Mandatory during repair by

OEM only 1988 SB2432-11-24-003

dated 15/02/1992 /

Amendment C Improvement of reliability

Mandatory during repair 1989 / /

Amendment D Component obsolescence

During repair if PCB or

component has to be replaced

Systematically during repair if

PCB Z500 must be replaced


SB2432-30-24-001 dated 25/04/2006 /





SB2432-30-24-002 Dated 07/12/2009

SIL2432-11-24-001dated 15/11/2006

2432-30

Modification for ATR72-210 version (new propeller).

On customer request 1994 SB2432-30-24-001

dated 10/1993 /

10



ATR

AC GCU P/N 2432-30 CMM reference : 24-22-14 Revision 4 : Date of update September, 30th 1999


Productionsince

SB SIL

/ Mechanical check of the rear guide bushing.

Under repair / / SIL2432-30-24-001dated 21/06/2007



/



Amendment A Component obsolescence



Systematically during repair if

PCB Z500 must be replaced

1999 SB2432-30-24-001 dated 25/04/2006 /




1999 SB2432-30-24-002 dated 07/12/2009 /

DC GCU P/N 102-003-11 CMM reference : 24-32-11 Revision 2 : Date of update July, 5th 2006


Productionsince

SB SIL


Under repair / / SIL102-003-11-24-

002 dated 21/06/2007

11



ATR


Productionsince

SB SIL



/




Mandatory during repair. 1988

SB102-003-11-24-001

dated 15/02/1992 /


Recommended during repair. 1988

SB102-003-11-24-002

dated 15/02/1992 /



SB102-003-11-24-004

dated 15/02/1992 /



SB102-003-11-24-005

dated 22/12/1999 /



SB102-003-11-24-006

Rev. 2 dated 08/11/2012

/


On customer request or if

PCB has to be repaired.

2005 SB102-003-11-24-

007 dated 27/01/2005

/

Amendment G Component obsolescence

During repair if selector switch or PCB has to be replaced

2006 SB102-003-11-24-

008 dated 25/04/2006

/

AC BPCU GCU P/N 945-11 CMM reference : 24-41-13 Revision 3 : Date of update June, 15th 1999


Productionsince

SB SIL



12



ATR


Productionsince

SB SIL

/




Mandatory during repair. 1989 SB945-11-24-002

ated 02/1992 /

945-12 Improvement of reliability

On customer request. 1997 SB945-11-24-003

dated 30/06/1996 /

AC BPCU GCU P/N 945-12 CMM reference : 24-41-13 Revision 3 : Date of update June, 15th 1999


Productionsince

SB SIL


/ / / SIL945-12-24-001dated 21/06/2007



/



13



ATR

DC BPCU P/N 105-003-1 CMM reference : 24-76-13 Revision 3 : Date of update August, 8th 2006


Productionsince

SB SIL



/





dated 02/1992 /



dated 02/1992 /

Amendment C Improvement of manufacturing process


1994 SB105-003-24-005 dated 02/1992 /



dated 02/1992 /



dated 02/1992 /



dated 09/1990 /


Mandatory during repair.


/ /





SB105-003-24-008 dated 21/12/1998 /


During repair if PCB has to be

replaced.


/ /





SB105-003-24-009 dated 21/12/1998 /

14



ATR


Productionsince

SB SIL

Amendment L Improvement of reliability




/ /

Amendment M Component obsolescence




/ /

Amendment N Improvement of reliability

Mandatory during repair.


SB105-003-24-011 dated 12/01/2004 /





SB105-003-24-012 dated 25/04/2006 /

105-003-2 Improvement of reliability

On customer request. 1990 SB105-003-24-002

dated 02/1992 /

DC BPCU P/N 105-003-2 CMM reference : 24-76-13 Revision 3 : Date of update August, 8th 2006


Productionsince

SB SIL

/ Mechanical check of the rear guide

bushing. / / / SIL105-003-2-24-001

dated 26/06/2007



/



15



ATR


Productionsince

SB SIL


On customer request. 1994 / /


Mandatory during repair. 1994 / /




1999 SB105-003-24-008 dated 21/12/1998 /


During repair if PCB has to be

replaced. 1999 / /

Amendment L Improvement of reliability



2000 SB105-003-24-009 dated 21/12/1998 /

Amendment M Improvement of reliability



2000 / /

Amendment N Component obsolescence



2002 / /




2003 SB105-003-24-010 dated 12/01/2004 /

Amendment R Improvement of reliability


dated 12/01/2004 /

Amendment S Component obsolescence



2005 SB105-003-24-012 dated 25/04/2006 /

16



ATR

STATIC INVERTER P/N 559-012A CMM reference : 24-21-11 Revision 2 : Date of update June, 15th 2001


Productionsince

SB SIL

/ Checking of over-voltage threshold protection

Under repair / / SIL 559-012B-24-001dated 15/06/2006



/





Amendment B

Improvement of the control of "Static Inverter fault" signal


Amendment C

Improvement of reliability of auxiliary power card

Mandatory during repair


SB559-012A-80-001 dated 15/12/1997 /

Amendment D Component obsolescence




/ /

559-012C

Improvement of reliability in order to avoid double loss of static inverter

Mandatory during repair


SB559-012AB-24-002

Rev. 1 dated 25/01/2011

/

STATIC INVERTER P/N 559-012B CMM reference : 24-21-11 Revision 2 : Date of update June, 15th 2001


Productionsince

SB SIL



17



ATR


Productionsince

SB SIL

/



Amendment B Component obsolescence



2005 / /

559-012D

Improvement of reliability in order to avoid double loss of static inverter

Mandatory during repair 2008

SB559-012AB-24-002

Rev. 1 dated 25/01/2011

/

STATIC INVERTER P/N 559-012C CMM reference : 24-21-11 Revision 2 : Date of update June, 15th 2001


Productionsince

SB SIL



/



STATIC INVERTER P/N 559-012D CMM reference : 24-21-11 Revision 2 : Date of update June, 15th 2001


Productionsince

SB SIL



/



18



ATR

TRU P/N F11NA3121 CMM reference : 24-32-13 Revision / : Date of update October, 15th 1996


Productionsince

SB SIL



/



LIGHTING TRANSFORMER P/N 156 Technical Characteristics & Maintenance Sheet reference : 30-31-13 Revision 3 : Date of update April, 2010


Productionsince

SB SIL

/ / / / / /

CONTROL BOX P/N F46BC0101 CMM reference : 26-15-24 Revision 1 : Date of update December, 01st 1993


Productionsince

SB SIL



/



19



ATR


Productionsince

SB SIL

Amendment A Improvement of reliability and functionning.

Mandatory under repair. 1987 / /

Amendment B Improvement of manufacturing & repair processes.

During repair if necessary. 2009

SBF46BC0101-24-001

dated 29/08/2012 /

/ Inspection of the fan control box

Unit in operation 2012

SBF46BC0101-24-002

dated 31/08/2012


During repair if necessary. 2012 / /


During repair if necessary. 2012 / /

CONTROL BOX P/N F46BD0101 CMM reference : 26-15-25 Revision / : Date of update June, 15th 2001


Productionsince

SB SIL



/



Amendment A Improvement of reliability.

Only under production. 1996 / /

LANDING GEAR CONTROL LEVEL P/N F96GA0101 CMM reference : 32-31-11 Revision 2 : Date of update January, 26th 2009


Productionsince

SB SIL



20



ATR

LANDING GEAR CONTROL LEVEL P/N F96GA0102 CMM reference : 32-31-11 Revision 2 : Date of update January, 26th 2009


Productionsince

SB SIL



Amendment A Improvement of functionning

Mandatory during repair. 1987 / /


On customer request. 1989 / /


On customer request. 1998

SBF96GA0102-24-001

dated 21/12/1998 /

Amendment D Improvement of functionning

During repair if component has to be replaced.

2001 / /

TRANSFORMER (DPCT) P/N 20732 (DPCT : Differential Protection Current Transformer)

Technical Characteristics & Maintenance Sheet reference : 24-22-11 Revision 2 : Date of update June, 1993


Productionsince

SB SIL

/ / / / / /

21



ATR

HALL EFFECT CAPTOR SENSOR P/N 103-003-2 Technical Characteristics & Maintenance Sheet reference : 24-32-12 Revision 4 : Date of update April, 2006


Productionsince

SB SIL


Only under production 1998 / /


Only under production 2003 / /

EMERGENCY AXE P/N 680-0040-000 Technical Characteristics & Maintenance Sheet reference : 25-65-01 Revision 1 : Date of update 1992


Productionsince

SB SIL

/ Packaging for Emergency axe

Recommended for shipment / /

SIL680-0040-000-25-001

dated 26/10/2009

DC-STAR GSE P/N B3893-000 USER MANUAL : Y28-0617 Revision a : Date of update October, 17rd 2008


Productionsince

SB SIL

/ / / / / /

22



ATR 4. STATEMENT OF AGREEMENT Statement of Agreement to Terms and Conditions of Sale of Thales Technical Publications Thales Component Maintenance Manual 24-XX-XX is intended solely for use by Company Name. Copying, reproducing or redistribution of this or any Thales Component Maintenance Manual (CMM) or Service Bulletin (SB), to any other party or location is strictly prohibited without Thales prior written consent. Thales retains all intellectual property rights, title and interest in the CMMs and/or SBs provided, including all rights under applicable patents, copyrights, trademarks and trade secrets, and all renewals and extensions thereto. Company Name shall not alter or remove any patent, copyright, trademark, or proprietary rights notice. Agreed to and Accepted by: ____________________________ __________________________ (Print Name) (Title) ____________________________ __________________________ (Signature) (Date)

ATR 42/72 - 2013 - Thales Group · PDF fileATR THALES AVIONICS ELECTRICAL SYSTEMS TECHNICAL...

Documents

Transcript of ATR 42/72 - 2013 - Thales Group · PDF fileATR THALES AVIONICS ELECTRICAL SYSTEMS TECHNICAL...