Atop Ethernet serial servers - January 2009
-
Upload
technical-dude -
Category
Documents
-
view
505 -
download
4
Transcript of Atop Ethernet serial servers - January 2009
Industrial Ethernet serial serversJanuary 2009
GW51C-MAXI - Industrial 1-port, DIN-rail Ethernet serial serverSE8502-M12 - Industrial 2-port, IP67 Ethernet serial serverSE5001 - Industrial 1-port Ethernet serial serverSE5002 - Industrial 2-port Ethernet serial serverSE5404 - Industrial 4-port Ethernet serial serverSE5016 - Industrial 8/16-port Ethernet serial server
Primeconcept Srl - C.so Susa, 299/A - 10098 Rivoli (TO)Tel. 011.5531050 - Fax [email protected] - www.primeconcept.it
■ ■ GW51C-MAXI
Device Networking Access
Ethernet Serial Server
■ Single-port DIN-Rail model■ Metal housing with IP50 standard■ 15 KV ESD protection for serial ports■ 10/100Mbps Fast Ethernet Full Duplex Auto Negotiation.■ Support multiple link mode with TCP Server/Client, UDP
and Virtual COM mode■ Extend the distance of point-to-point serial connection■ Selectable RS-232, RS-485, or RS-422 serial interface■ Configurable via serial console, Telnet, built-in web
server, or Windows based utilities■ Compact size to fit anywhere and connects anytime■ Upgradeable firmware via network
The Industrial Serial Server GW51C-MAXI is a gateway between Ethernet (TCP/IP) and RS-232/RS-485/RS-422 communications. It allows almost any serial device to be connected to a new or ex-isting Ethernet network.
By encapsulating serial data and transporting it over Ethernet, GW51C-MAXI offers full-duplex, bi-directional data transmission transparent between serial port and Ethernet network.
In industrial and manufacturing automation fields, GW51C-MAXI is used as a field device to connect Ethernet through TCP/IP protocol directly. It is also specially designed for conjunction with PLCs, HMIs, Barcode Scanners, Data Terminals, Electronic Kanbans, Shop Floor Control Systems, and Pick-to-Light Systems.
Terminal Server (main control program executed in this unit) makes most use of Ethernet connectivity to drive serial devices. It transforms whatever serial data received to TCP/UDP format then enables a host computer to drive the serial devices through the Ethernet.
Atop Virtual COM software provides existing Windows based applications to access serial-Ethernet devices by mapping to remote serial server over Ethernet.
Flexible configuration options enable this unit to be setup over Ethernet by Telnet, web browser, serial console, or other Windows utilities. Packed in a rugged metal housing with DIN Rail- mountable case and 9~30VDC wide power input range, GW51C-MAXI is ideal for almost any industrial and manufacturing automation.
Technologies
RoHS compliant
CAGW51C-MAXI_E:v2-040730
Atop Technologies, Inc.TEL:+886-3-5508137FAX:[email protected]://www.atop.com.tw
Design and specification are subject to change without notice.All other product names referenced herein are registered trademarks of their respective companies.
Industrial Serial ServerGW51C-MAXI
Specifications
CPU
Flash Memory
SDRAM
EEPROM
Network Interface
Network Protocol
Reset
Watch Dog Timer
Serial Interface
Serial Connector
Serial Communication
LED Indicator
Power Requirement
Temperature
Humidity
Dimension
Software
Configuration
Ordering Information (by Model)
GW51C-MAXI
AD15-24C (US)
AD15-24D (EU)
16-bit x86 Embedded CPU
512 KBytes
512 KBytes
512 Bytes
10/100Mbps Fast Ethernet
TCP/IP, UDP, SNMP Read, HTTP, Telnet, ARP, BOOTP, ICMP, DHCP
Built-in default key to restore the defaults
1.34 second hardware auto reset
Internal power failure threshold:4.75V
One serial port, RS-232/RS-485/RS-422 console switch selectable
5 pin terminal block, 8 pin mini-DIN and DB9 male cable
Data Rate: 1200 bps~230 Kbps
Data bit: 5, 6
Parity: None, Even, Odd, Mark, Space
Stop Bits: 1 or 2
Flow Control: Xon/Xoff, RTS/CTS
LAN, RUN and COM
9~30VDC, 200mA@12V
Operation: 0oC~60oC, Storage:-40oC~85oC (-40o~185oF)
5%~95% non-condensing
45mm x 91mm x 76mm (W x Hx D)
Windows OS based Configuration Utility, Virtual COM software
Web (HTML), Telnet, serial console and Windows based Configuration Utility
Single-port (Default RS-232) serial server
AC110V~240V/DC24V, US Plug (optional)
AC100V~240V/DC24V, EU Plug (optional)
GW51C-MAXI Front Panel
45.00mm
91.0
0mm
RUN COM LAN
ON OFF
DSR
RTS/R-
DTR
CTS/T-
TxD/R+
DCD
RxD/T+
S.G
S.G.
RTS/R-
TxD/T+
CTS/T-
RxD/T+
F.G.
VIN-
VIN+
SW2SW1
SW1
OFF
ON
SW2
OFF
ON
OFF
ON
MODE
RS-232
CONSOLE
RS-485
RS-422
LAN
RUN LAN
ON OFF
DSR
RTS/R-
DTR
CTS/T-
TxD/R+
DCD
RxD/T+
S.G
S.G.
RTS/R-
TxD/T+
CTS/T-
RxD/T+
F.G.
VIN-
VIN+
SW2SW1
SW1
OFF
ON
SW2
OFF
ON
OFF
ON
MODE
RS-232
CONSOLE
RS-485
RS-422
LAN
RS-232/422/485 Mini-Din Connector
RS-232/422/485 Mini-Din Connector
LED IndicatorLED Indicator
Power SupplyInput Connector
Power SupplyInput Connector
Mode SwitchMode Switch
RS-232/422/485 Mini-DinPin AssignmentRS-232/422/485 Mini-DinPin Assignment
10/100Mbps Ethernet10/100Mbps Ethernet
Mode Switch TableMode Switch TableRS-232/422/485 Terminal
Block ConnectorRS-232/422/485 Terminal
Block Connector
TCP Client mode
Card Reader
Card Reader
Remote ControlHost
RS-232/RS-485
GW51C-MAXI
GW51C-MAXI
Ethernet
UDP mode
RS-232/RS-485
GW51C-MAXI
Ethernet
Display
Tunneling mode
PLC
Touch Screen
RS-232/RS-485
GW51C-MAXI
GW51C-MAXI
Ethernet
TCP Server ModeComputer
PLC
RS-232/RS-485
GW51C-MAXI
Ethernet
Technologies
■ ■ SE8502-M12
Device Networking Access
■ 15KV ESD protection for serial signals■ 10/100 Mbps Fast Ethernet full duplex auto negotiation ■ Support multiple link mode with TCP server/client, UDP
and Virtual COM mode ■ Monitor, manage and control industrial field devices
remotely ■ Configuration: Built-in Web Server /Serial Console/
Telnet■ Windows-based utility for IP configuration■ Firmware upgrade remotely via Ethernet■ Rigid aluminum case design compliant with IP67
standard■ Wide temperature range : -40°C ~ 75°C■ Wall mounting
SE8502-M12 is an Industr ial 2-port IP67 Serial Server, offer ing waterproof, dustproof, and vibration-resistant.
There is a strong demand for reliable and rugged networking solutions, that can be used for the industrial workplace in harsh environmental conditions, such as high levels of moisture, dust, heat, electrical in ter ference, and v ibrat ion. SE8502-M12 is a device that has IP67-rated housing and M12 metal connectors. It also provides a wide operating temperature range from -40°C ~ 75°C.
SE8502-M12 supports multiple link mode with TCP server/client, UDP and VirtualCOM, that can be configured by Windows-based utility. In addition, M12 connectors secure a firmly connecting, and prevent loose from vibrating condition, such as in moving vehicles.
2-Port IP67 Serial Server
RoHS-compliant
IP 67
CA_SE8502-M12_E:v1-081024
Atop Technologies, Inc.TEL:+886-3-5508137FAX:[email protected]://www.atop.com.tw
Design and specification are subject to change without notice.All product names referenced herein are registered trademarks of their respective companies.
2-Port IP67 Serial ServerSE8502-M12
Specifications
CPU
Flash Memory
SDRAM
EEPROM
Network Interface
Network Connector
Network Protocol
Serial Interface
Serial Connector
Serial Communication
Dimension
Casing
Power Requirements
LED Indicator
Temperature
Humidity
Software
Configuration
Ordering Information
SE8502-M12
MPC5200B-400 32-bit Embedded CPU
16 MBytes
128 MBytes
2 KBytes
10/100 Mbps Fast Ethernet
M12
TCP/IP, UDP, HTTP, SNMP, ARP, Telnet, ICMP, BOOTP, DHCP
RS-232/422/485 (software selectable)
M12
Data Rate: 1200 bps~230 Kbps
Characters: 7 or 8 data bits
Parity: None, Even, Odd, Mark, Space
Stop Bits: 1 or 2
Flow Control: Xon/Xoff, RTS/CTS
79mm x 24.2mm x 144mm (WxHxD)
IP-67 protection
9~30VDC, 1A in 5-pin M12(A-coded) connector
LAN, RUN and COM
Operation: -40°C ~75°C
Storage: -40°C~85°C
5%~95% Non-condensing
Windows-based configuration utility, Virtual COM software
Web, Telnet, Serial Console and Windows-based configuration utility
2-port IP67 Serial Server
Connector Pin Assignments
Tx+ Rx+
Tx-Rx-
9~48VNC
GND
FG
NC
DCDRTS/R-CTS/T-
DSR
SG
RXD/T+TXD/R+
DTR
LAN Port Pin Assignment
Selectable Serial Port Pin Assignment
Power Port Pin Assignment
Front Panel
■ ■ SE5001
Device Networking Access
■ Cigarette pack size■ Rugged metal case with wall/DIN-Rail mount■ Watch Dog Timer 1.34 sec. hardware auto reset■ 15KV ESD protection for serial signals■ 10/100Mbps Fast Ethernet full duplex auto negotiation■ Support TCP server/client, UDP for Virtual COM mode
and Tunneling mode■ Monitor, manage and control industrial field devices
remotely■ Configuration: Web Server page/Serial Console/ Telnet
Console■ Monitor IP configuration utility for Windows■ Upgrade firmware from remote-PC via Ethernet■ Programmable with built-in C software development kit■ Redundant dual DC power input for non-stop operation
Make Serial Devices Ready to the Network
The Industrial Serial Server SE5001 is a cost effective gateway between Ethernet (TCP/IP) and serial signal communications. It al lows almost any serial device to be connected to a new or existing Ethernet network.
By encapsulating serial data and transporting it over Ethernet, SE5001 offers ful l-duplex, bi-direct ional data transmission transparent between serial port and Ethernet network.
Easy to Use
Flexible configuration options enable this unit to be setup over Ethernet by Telnet , Web browser, Ser ia l Console, or other Windows utilities. Packed in a rugged metal housing for wall or DIN-Rail mount with 5~30VDC wide power input range, SE5001 is ideal for almost any industrial and manufacturing automation.
ATOP Virtual COM software provides existing Windows based application to access serial device by mapping to remote serial server via Ethenet.
Specially Designed for Automation Fields
In industrial and manufacturing automation fields, SE5001 is used as a field device to connect Ethernet through TCP/IP protocol directly. It is also specially designed for conjunction with PLCs, HMIs, Barcode Scanners, Data Terminals, Electronic Kanbans, Shop Floor Control Systems, and Pick-to-Light Systems.
Technologies
RoHS-compliant
Features
1-Port Serial Server
CASE5001_E:v1-060801
Atop Technologies, Inc.TEL:+886-3-5508137FAX:[email protected]://www.atop.com.tw
Design and specification are subject to change without notice.All other product names referenced herein are registered trademarks of their respective companies.
Ethernet Serial ServerSE5001
Specifications
CPU
Flash Memory
SDRAM
EEPROM
Network Interface
Network Protocol
Reset
Watch Dog Timer
Serial Interface
Serial Connector
Serial Communication
LED Indicator
Power Requirement
Temperature
Humidity
Dimension
Software
Configuration
Ordering Information (by Model)
SE5001-S2
SE5001-S5
Optional Accessories
DK-25
AD15~24DC (US)
AD15~24DC (EU)
16-bit x86 Embedded CPU
512 KBytes
512 KBytes
512 Bytes
10/100Mbps Fast Ethernet
TCP/IP, UDP, HTTP, SNMP, ARP, Telnet, ICMP, BOOTP, DHCP (Note)
Built-in reset key to restore the defaults
1.34 seconds hardware auto reset
Internal power failure threshold:4.75V
RS-232 or RS-485/RS-422
DB9 male
Data Rate: 1200 bps~230 Kbps
Data bit: 5, 6
Parity: None, Even, Odd, Mark, Space
Stop Bits: 1 or 2
Flow Control: Xon/Xoff, RTS/CTS
LAN, RUN and COM
5~30VDC, 200mA@12V / 5VDC 350mA@5V selectable
Operation: 0oC~ 60oC, Storage:-40oC~85oC (-40o~185oF)
5%~95% non-condensing
65mm x 78mm x 28mm (W x H x D)
Windows OS based Configuration Utility, Virtual COM software
Web (HTML), Telnet and Windows based Configuration Utility
Single RS-232 port serial server without adapter
Single RS-485/RS-422 port serial server without adapter
DIN-Rail Kit
Power adapter (US), AC100~240V/DC 24V 0.6A with Terminal block
Power adapter (EU), AC100~240V/DC 24V 0.6A with Terminal block
TCP Client mode
Card Reader
Card Reader
Host Computer
Serial Bus
SE5001
SE5001
Ethernet
UDP mode
Serial Bus
SE5001
Ethernet
Display
TCP Server Mode
Tunneling mode
PLC
Touch Screen
Serial Bus
SE5001
SE5001
Ethernet
Host Computer
Host Computer
PLC
Serial Bus
EthernetSE5001
RS-232RS-232
SE5001 DIN-Rail Mounting
DIN Rail MountingOptional DK-25
DIN Rail MountingOptional DK-25
Reset ButtonReset Button EthernetRJ-45 10/100Mbps
Power InputTerminal Block 5~30VDC
Power InputTerminal Block 5~30VDC
Power InputDC-Jack 5VDC
Power InputDC-Jack 5VDC
■ ■ SE5002
Device Networking Access
Make Serial Devices Ready to the Network
The Industr ia l Ser ial Server SE5002 is a dual port gateway between Ethernet (TCP/IP) and serial signal communications. It al lows almost any serial device to be connected to a new or existing Ethernet network.
By encapsulating serial data and transporting it over Ethernet, SE5002 offers ful l-duplex, bi-direct ional data transmission transparent between serial port and Ethernet network.
Easy to Use
Flexible configuration options enable this unit to be setup over Ethernet by Telnet , Web browser, Ser ia l Console, or other Windows utilities. Packed in a rugged metal housing for wall or DIN-Rail mount with 9~30VDC wide power input range, SE5002 is ideal for almost any industrial and manufacturing automation.
ATOP Virtual COM software provides existing Windows based application to access serial device by mapping to remote serial server via Ethenet.
Specially Designed for Automation Fields
In industrial and manufacturing automation fields, SE5002 is used as a field device to connect Ethernet through TCP/IP protocol directly. It is also specially designed for conjunction with PLCs, HMIs, Barcode Scanners, Data Terminals, Electronic Kanbans, Shop Floor Control Systems, and Pick-to-Light Systems.
Technologies
RoHS-compliant
Features■ Rugged metal case with DIN-Rail/wall-mount■ 15KV ESD protection for serial signals■ 10/100Mbps Fast Ethernet full duplex auto negotiation■ Support multipl link mode with TCP server/client, UDP
and Virtual COM mode■ Monitor, manage and control industrial field devices
remotely■ Configuration: Built-in Web Server /Serial Console/
Telnet ■ Windows Base utility for IP configuration ■ Upgrade firmware from remote-PC via Ethernet
2-Port Serial Server
CA_SE5002_E:p-070130
Atop Technologies, Inc.TEL:+886-3-5508137FAX:[email protected]://www.atop.com.tw
Design and specification are subject to change without notice.All other product names referenced herein are registered trademarks of their respective companies.
2-Port Serial ServerSE5002
Specifications
CPU
Flash
RAM
EEPROM
Network Interface
Network Protocol
Reset
Serial Interface
Serial Connector
Serial Communication
LED Indicator
Power Requirement
Temperature
Humidity
Dimension
Software
Configuration
Ordering Information (by Model)
SE5002
SE5002-S55is
Optional Accessories
Power Adapter-SE5002
1A25F (US)-SE5002-S55isPackage
16-bit x86 Embedded CPU
512 Kbytes
512 Kbytes SDRAM
512 Bytes
10/100Mbps Fast Ethernet
TCP(UDP)/IP, HTTP, SNMP, Telnet, ICMP, SMTP, DHCP client
Built-in reset key to restore the defaults
RS-232/RS-485/RS-422 or RS-485/RS-422 (by model)
DB9 male for SE5002, TB5 (Lockable) for SE5002-S55is
Daud Rate: 1200 bps~230 Kbps
Data Bit: 5, 6
Parity: None, Even, Odd, Mark, Space
Stop Bits: 1 or 2
Flow Control: None, Software: Xon/Xoff, Hardware: RTS/CTS
LAN, RUN and COM
9~30VDC
Operating: 0oC~ 60oC, Storage:-40oC~85oC (-40o~185oF)
5%~95% non-condensing
75mm x 85mm x 28mm (W x H x D)
Windows OS based Configuration Utility, Virtual COM software
Web Page / Telnet / Serial Console / Windows Utility
2-port software selectable RS232/422/485(D-Sub) serial server withoutadapter
2-port software selectable RS422/485(Terminal block lockable) photo-isolationserial server without adapter
1A25F US/EU: AC100~240V / DC12V: 1.25A DC Jack Lockable
US315-12 US/EU: AC100~240V / DC 12V: 5.08mm pitch Terminal block
UDP Mode
Tunneling Mode
TCP Server Mode
TCP Client Mode
Card Reader
Card Reader
Host Computer
Serial Bus
Ethernet
Serial Bus
Ethernet
Display
PLC
Touch Screen
Serial Bus
Ethernet
Host Computer
Host Computer
PLC
Serial Bus
EthernetSE5002
Ethernet RJ-45 10/100Mbps
Power Input DC 9~30VDC
RS-232 or RS-485/RS-422
Reset Button
DIN Rail MountingOptional DK-25
SE5002
SE5002
SE5002
SE5002
SE5002
5.08mm pitch Terminal block 3-pin x 13.81mm pich Terminal block 5-pin x 2
Quick Start Guide
Warranty Card
Product CD
Others
SE5002 SE5002-S55is
√1 1
1 1
Mount screw x 2
Standard Edition Standard Edition
Mount screw x 2
■ ■ SE5404
Device Networking Access
4-Port Serial Server
Make Serial Devices Ready to the Network
The Industrial Serial Server SE5404 is a 4 ports gateway between Ethernet (TCP/IP) and serial signal communications. It allows almost any serial device to be connected to a new or existing Ethernet network.
By encapsulating serial data and transporting it over Ethernet, SE5404 offers ful l-duplex, bi-direct ional data transmission transparent between serial port and Ethernet network.
Easy to Use
Flexible configuration options enable this unit to be setup over Ethernet by Telnet, Web browser, Serial Console, or other rack utilities. Packed in a rugged metal housing for wall or rack mount with 9~30VDC wide power input range, SE5404 is ideal for almost any industrial and manufacturing automation.
ATOP Virtual COM software provides existing Windows based application to access serial device by mapping to remote serial server via Ethenet.
Specially Designed for Automation Fields
In industrial and manufacturing automation fields, SE5404 is used as a field device to connect Ethernet through TCP/IP protocol directly. It is also specially designed for conjunction with PLCs, HMIs, Barcode Scanners, Data Terminals, Electronic Kanbans, Shop Floor Control Systems, and Pick-to-Light Systems.
Technologies
RoHS-compliant
Features■ 4 ports RS-232/RS-422/RS-485, baud rate up to
921 Kbps■ Metal housing, rack/wall mount support■ 2 ports10/100Mbps Fast Ethernet full duplex auto
negotiation■ Support multiple link mode with TCP server/client,
UDP and Virtual COM mode■ Monitor, manage and control industrial field devices
remotely■ Configuration: Built-in Web Server /Serial Console/
Telnet ■ Windows Base utility for IP configuration
CA_SE5404_E:p-070207
Atop Technologies, Inc.TEL:+886-3-5508137FAX:[email protected]://www.atop.com.tw
Design and specification are subject to change without notice.All other product names referenced herein are registered trademarks of their respective companies.
4-Port Serial ServerSE5404
Specifications
CPU
Flash Memory
DDRAM
Network Interface
Network Protocol
Reset
Serial Interface
Serial Connector
Serial Communication
LED Indicator
Power Requirement
Temperature
Humidity
Dimension
Software
Configuration
Ordering Information (by Model)
SE5404
SE5404-S5isOptional Accessories
DK-25
1A25F (US)
1A25F (EU)
US315-12 (US)
USE315-12 (EU)
32-bit 266MHz RISC Processor with MMU
2+8 MB (2MB for Bootloader)
32 MBytes
10/100Mbps Fast Ethernet *2
TCP/IP, UDP, HTTP, SNMP, ARP, Telnet, ICMP, BOOTP, DHCP, SNTP
Built-in reset key to restore the defaults
RS-232/RS-485/RS-422 for SE5404 or RS-485/RS-422 for SE5404-S5is
DB9 male for SE5404, TB5 for SE5404-S5is
Data Rate: 110 bps~921 Kbps (SE5404-S5is baud rate only up to 230 Kbps)
Data bit: 5, 6, 7, 8
Parity: None, Even, Odd, Mark, Space
Stop Bits: 1 or 2
Flow Control: Xon/Xoff, RTS/CTS
LAN, RUN and COM
9~30VDC
Operation: 0oC~ 60oC, Storage:-40oC~85oC (-40o~185oF)
20%~90% non-condensing
197mm x 112mm x 37mm (W x H x D)
Windows OS based Configuration Utility, Virtual COM software
Web, Telnet, Serial Console and Windows based Configuration Utility
4 ports (DB9 connector) serial server, RS232/RS422/RS485 software selectable,without adapter
4 ports RS-485/RS-422 isolation serial server without adapter
DIN-Rail Kit
Power adapter (US), AC100~240V/DC 12V 1.25A with DC Jack for SE5404 (Lockable)
Power adapter (EU), AC100~240V/DC 12V 1.25A with DC Jack for SE5404 (Lockable)
Power adapter (US), AC100~240V/DC 12V 1.25A with Terminal block for SE5404-S5is
Power adapter (EU), AC100~240V/DC 12V 1.25A with Terminal block for SE5404-S5is
UDP Mode
Tunneling Mode
TCP Server Mode
TCP Client Mode
Card Reader
Card Reader
Host Computer
Serial Bus
Ethernet
Serial Bus
Ethernet
Display
PLC
Touch Screen
Serial Bus
Ethernet
Host Computer
Host Computer
PLC
Serial Bus
EthernetSE5404
SE5404
SE5404
SE5404
SE5404
SE5404
LAN2LOCK
LAN1COM4COM3COM2COM1
LAN2 V+ V- FGLAN1COM4COM3COM2COM1
1 2 3 4 5 1 2 3 4 5 1 2 3 4 5 1 2 3 4 5
DC 9~30V
DC 9~30V
SE54044-port Serial Server
DefaultDebug
LAN COM
PWR 1 2 1 2 3 4ACT TX
Technologies
RUN 100 RX
SE5404 Front Panel
SE5404
SE5404-S5is
■ ■ SE5008/SE5016
Device Networking Access
Multi-Port Serial Server
Technologies
■ 8/16-port Ethernet serial server with: RISC 32bits
266MHz CPU■ 19-inch rack-mount metal housing ■ Software selectable RS-232/RS-485/RS-422 with Gas
Discharge Tube for Surge protection or photo-coupled
isolation RS-422/RS-485■ Dual 10/100Mbps Ethernet for networking redundancy■ UDP, TCP Server and Client for Virtual COM mode■ Configuration via Serial Console, Telnet, Web Server or
Windows-based utilities■ Linux with GNU C SDK for user application programming
Make Serial Devices Ready to the Network
The Mult i-port Industrial Serial Server SE5008/SE5016 is a gateway between Ethernet (TCP/IP) and RS-232/RS-422/RS-485 commun ica t ions . I t a l l ows a lmos t any se r ia l dev ice to be connected to a new or existing Ethernet network.
By encapsulating serial data and transporting it over Ethernet, SE5008/SE5016 offers full-duplex, bi-directional data transmission transparent between serial port and Ethernet network.
Easy to Use
Flexible configuration options enable this unit to be setup over Ethernet by Telnet, Web browser, Serial Console, or other Windows utilities. Packed in a rugged metal housing with 19-inch rack mount and 100~240VAC wide power input range, SE5008/SE5016 is ideal for almost any industrial and manufacturing automation.
High Performance Programmable Device Server
With its powerful computing power and Linux SDK, it could be a high performance programmable controller for t ime-crit ical, high-security, multi-function controller such as SCADA, tele- communication, transportation, banking, hospital, etc.
RoHS compliant
CASE5016_E:v1-050901
Atop Technologies, Inc.TEL:+886-3-5508137FAX:[email protected]://www.atop.com.tw
Design and specification are subject to change without notice.All other product names referenced herein are registered trademarks of their respective companies.
Multi-port Serial ServerSE5008/SE5016
Specifications
CPU
Flash
Memory
Network Interface
Network Protocol
Serial Interface
Serial Connector
Networking Protection
Serial Communication
Serial LED Indicator
Power Requirement
Power Protection
Mechanical Specifications
Temperature
Humidity
Dimension
Software
Configuration
Ordering Information
SE5008-N2Sgt STD(US): 2-LAN & 8-port software selectable RS422/485(RJ45) Gas-tube protection Programmable serial server
SE5008-N2 STD(US): 2-LAN & 8-port software selectable RS232/422/485(RJ45) serial server
SE5008-N2Sgt STD(EU): 2-LAN & 8-port software selectable RS422/485(RJ45) Gas-tube protection Programmable serial server
SE5008-N2 STD(EU): 2-LAN & 8-port software selectable RS232/422/485(RJ45) serial server
SE5016-N2Sgt STD(US): 2-LAN & 16-port software selectable RS422/485(RJ45) Gas-tube protection Programmable serial server
SE5016-N2 STD(US): 2-LAN & 16-port software selectable RS232/422/485(RJ45) serial server
SE5016-N2Sgt STD(EU): 2-LAN & 16-port software selectable RS422/485(RJ45) Gas-tube protection Programmable serial server
SE5016-N2 STD(EU): 2-LAN & 16-port software selectable RS232/422/485(RJ45) serial server
32-bit 266MHz RISC Processor with MMU
2+8MB (2MB for Bootloader)
32 Mbytes DDR
Dual 10/100Mbps Ethernet
ICMP, TCP(UDP)/IP, DHCP client, NTS, DNS, SNMP, SMTP, HTTP, Telnet
RS-232/RS-422/RS-485 Software selectable
R-J45
Built-in 2.0 KV magnetic isolation
Daud Rate: 110bps~921Kbps
Data Bits: 5, 6, 7, 8
Parity: None, Even, Odd, Mark, Space.
Stop Bits: 1 or 2
Flow Software: Xon/Xoff, Hardware: RTS/CTS
Tx, Rx
100~260 V
15KV esd
SECC sheet metal (1 mm)
Operating: 0oC~60oC, Storage: -40oC~85oC
5%~95% non-condensing
436mm x 43.5mm x 200mm (W x H x D)
Windows 95/98/ME/NT/2000/XP/2003 Virtual Com drivers
Web Page / Telnet / Serial Console / Windows Utility
MENU SEL
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16
Console
TxRx
Power
ReadyMATRIX
16-port Serial Server
Technologies
436.0
43.5Debug
SE5016 Front Panel
MENU SEL
1 2 3 4 5 6 7 8
Console
TxRx
Power
ReadyMATRIX
8-port Serial Server
Technologies
436.0
43.5Debug
SE5008 Front Panel
43.5
14.514.511.8
436.0
LAN1 LAN2
RS-232/RS-485/RS-422
N
E
L
Selectable
1 2 3 4 5 6 7 8
43.5
14.514.511.8
436.0
LAN1 LAN21 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16
RS-232/RS-485/RS-422 RS-232/RS-485/RS-422
N
E
L
Selectable Selectable
Package
Cable
Wall Mount Kit
Quick Start Guide
Warranty Card
Product CD
Others
2
1
1
Foot rubber x 4
Standard Edition
RJ-45 to DB9 male x 1 RJ-45 Ethernet Cross-over x 1RJ-45 RS232/422 Cross-over x 1RJ-45 RS485 loop-back x 1Power card x 1