Atlona IR Receiver Cable for POE Extenders

AT-IR-CS-RX

atlona.comToll free: 1-877-536-3976

Local: 1-408-962-0515

Signal (S)

Ground ( )

Power (P)

AT-UHD-EX-70C-TX

AT-UHD-EX-70C-RX

AT-IR-CS-TXEmitter

AT-IR-CS-RXReceiver

atlona.comToll free: 1-877-536-3976

Local: 1-408-962-0515

RS-232

RX TX

IR IN

S

IR OUT

S- +

CAT5e/6/7 OUTHDMI IN

FW

DC 48V IN

LINK

POWERAT-UHD-EX-70C-TX

FW LINK

POWERAT-UHD-EX-70C-RX

RS-232

RX TX

IR IN

P S

IR OUT

S

CAT5e/6/7 INHDMI OUT

IntroductionThe Atlona IR Receiver Cable for POE Extenders provides greater distance and better IR rejection from sources such as: plasma, CFL, and LCD panels.

Features and Specifications

Mounting and Placement

Captive Screw

Connection Diagram

• Frequency range from 30 to 60 kHz• Distance up to 10m w/no interference on axis *Operational distance may vary due to interference from IR radiating sources Ex. Sunlight, CFL, LCD, or Plasma displays• Reception Angle: +/- 45° off axis • Dimensions (H x W x D) 10 x 62 x 10 (mm) 0.39 x 2.44 x 0.39 (inch)• Red status LED indicator for quick verification the IR receiver is picking up the IR remote’s signal• Power Requirement: 12V DC, 20mA -- Maximum current output: 100mA -- Signal level: 10.8V

To mount the receiver, peel the back off and affix it to a clean surface.

The receiver may be placed anywhere, as long as it is in direct line of sight of the remote.

* Designed for select Atlona products** For warranty information see http://www.atlona.com/marketing/img/limited_warranty/