ATL/PDS/AL/032/0*, 04.02.18, Page 1/1* supersedes all previous versions

PRODUCT DATA

Health and Safety: Based on available information, this product is not expected to produce adverse effects on health when used for the intended application and the recommendations provided in the Material Safety Data Sheet (MSDS) are followed. MSDS's are available upon request through your sales contact office, or via the Internet. This product should not be used for purposes other than its intended use. If disposing off used product, take care to protect the environment

Premium Synthetic Blend Passenger Car Engine Oil-with LSPI Protection

API SL

Note: These characteristics are typical of current production. While future production will conform to Atlantic’s specification, variations in these characteristics may occur.

DESCRIPTIONATLANTIC SYNTHECH ULTRA HIGH TECH ENGINE OIL API SN PLUS are premium quality, synthetic automotive engine oil designed to provide excellent engine protection for turbocharged gasoline direct-injection, conventional gasoline-fueled and flex-fueled passenger cars and light trucks under all operating conditions.

• Turbocharged gasoline direct-injection, conventional gasoline-fueled and flex-fuel passenger cars, light trucks and sport utility vehicles, including gasoline-electric hybrids, especially when operating under severe conditions• Four-stroke cycle gasoline engines in other mobile or stationary equipment

APPLICATIONS

PRODUCT FEATURES & BENEFITS• Helps protect against low speed pre-ignition (LSPI) in turbocharged gasoline direct-injection engines (TGDI) • Friction-modified for improved fuel economy• Protects against wear and bearing corrosion • Protects against sludge and varnish formation• Excellent resistance to viscosity and thermal breakdown at high temperatures • Exceeds ILSAC GF-5 requirements for new cars under warranty• Formulated for use in vehicles operating on ethanol-containing fuels up to E85 • Formulated to protect turbochargers and emission control system catalysts• Low volatility for reduced oil consumption • Highly resistant to foaming

Viscosity Grade, SAE J300 0W-20 5W-20 5W-30 5W-40 10W-30 10W-40 10W-60 20W-50PRODUCT CODE INF- 05920SN Density at 150C, g/ml, ASTM D4052 0.848 0.862 0.862 0.865 0.866 0.869 0.869 0.881Color, ASTM 6045 3.0 3.0 3.0 3.0 3.0 3.0 3.0 3.5Cold Cranking Viscosity (CCS), mPa s, ASTM D5293 5400 6150 6150 6150 4550 6200 6800 7200 @-350C @-300C 300C @-300C @-250C @-250C @-250C @-150C Kinematic Viscosity at 400C, mm²/s, ASTM D445 46.0 49.8 65.4 95.0 65.1 106 177 176Kinematic Viscosity at 1000C, mm²/s, ASTM D445 8.8 8.5 10.9 14.3 10.4 15.8 22.7 19.6Viscosity Index, ASTM D2270 174 147 158 155 148 150 155 128Flash Point(COC), °C, ASTM D92 218 218 216 216 228 228 228 230Pour Point, °C, ASTM D97 -36 -30 -30 -30 -30 -30 -30 -30Total Base Number, mg KOH/g, ASTM D2896 8.0 8.0 8.0 8.0 8.0 8.0 8.0 8.0Sulfated Ash, wt%, ASTM D 874 0.96 0.96 0.96 0.96 0.96 0.96 0.96 0.96High-Temperature/High-Shear Viscosity @ 150ºC, cP, ASTM D4683 2.6 2.6 3.1 3.1 3.0 3.8 4.2 4.9Phosphorus, wt %, ASTM D5185 0.077 0.077 0.077 0.077 0.077 0.077 0.077 0.077Zinc, wt %, ASTM D5185 0.085 0.085 0.085 0.085 0.085 0.085 0.085 0.085

RECOMMENDATIONS / SPECIFICATIONSILSAC GF-5, API Service SN Plus API Service SN Plus with Resource Conserving (SAE 0W-20, SAE 5W-20, SAE 5W-30, SAE 10W-30)

Meets or exceeds the requirements of: Chrysler MS-6395, Ford WSS-M2C945-A, Ford WSS-M2C945-B1(SAE 5W-20), Ford WSS-M2C946-A, Ford WSS-M2C946-B1(SAE 5W-30),Ford WSS-M2C947-B1, Ford WSS-M2C947-A (SAE 0W-20) GM6094M

ATLANTIC SYNTHECH ULTRA HIGH TECH ENGINE OIL API SN PLUS

ATLANTIC SYNTHECH ULTRA HIGH TECH ENGINE OIL

TYPICAL TECHNICAL PROPERTIES