ATI Connectors - 2mm hirel shielded connectors
Transcript of ATI Connectors - 2mm hirel shielded connectors
www.ati-electronique.fr
/2
ATI reserves the right to discontinue the manufacture or change specifications without prior notice, or any parts illustrated in this data sheet. For more information, please take advice.
Z.A. St-Guénault - 6 rue Jean Mermoz91080 Courcouronnes - France
Tel. 33 (0)1 69 36 64 00 - Fax. 33 (0)1 64 97 14 [email protected]
High reliability 2 mm pitch connector.Mixed layout with high frequency (up to 6 GHz) and high power (up to 20 Amps) contacts.Board to board, board to wire, wire to wire connectorsBuilt-in jackscrewsRoHs compliantTemperature range -55°C / +125°CBackshell on request
MaterialsMale contacts Copper alloy gold plated
(tinned on p.c.b connection side)
Female contacts Outer : copper alloy, tin or gold platedInner : beryllium copper, gold plated
Insulator PEEK : UL 94 V0
Shell Aluminium alloy
MICRONECTOR 250Shielded connector
Electrical characteristics Working voltage 240 VDC (sea level)
Nominal current 3A max at 25° C
Contact resistance 10 mΩ max.
Insulation resistance 1000 MΩ min.
Mechanical characteristics Mating/unmating force 0.2 to 2.2 N per
contact
Contact retention 10 N
Mechanical operations > 500 cycles
25
0 s
eri
es
Coax & power contacts
MaterialsSpring loaded parts Beryllium copper, gold plated
Other metallic parts Copper alloy gold plated
Insulator PTFE
Retaining clip Beryllium copper nickel plated
Electrical characteristicsContact resistance < 6 mΩ max.
Proof voltage 1000 VAC RMS
Working voltage 180 VAC RMS under 500 mA
Insulation resistance 106 MΩ min.(250 VAC RMS)
Coaxial contacts
Impedance 50 Ω
VSWR < 1.35
Frequency range 6 GHz (according to cable)
Power contacts
Wire AWG 12Wire AWG 14Wire AWG 16Wire AWG 18
20 A15 A10 A 5 A
Mechanical characteristics Endurance 500 cycles
Insertion force 0.60 to 5 N per contact
Withdrawal force 0.50 to 2 N per contact
Unmating security 1.30mm min.
Contact substitution 5 operations
L.F. contacts specifications
Coax contact
Power contact
www.ati-electronique.fr
2/2
ATI reserves the right to discontinue the manufacture or change specifications without prior notice, or any parts illustrated in this data sheet. For more information, please take advice.
Z.A. St-Guénault - 6 rue Jean Mermoz91080 Courcouronnes - FranceTel. 33 (0)1 69 36 64 00 - Fax. 33 (0)1 64 97 14 [email protected]
250 F 0 Y C
250 F 0 Y C 32 35
25
0 s
erie
s
HOW TO ORDER
SPECIAl CONTACTS0 to 36 Coaxial contacts55 to 76 & 90 Power contacts00 or omit No special contacts
TOTAl NO. OF l.F. CONTACTS0, 8, 26, 34, 42
TOTAl NO. OF SPECIAl CONTACTS0 to 9 With L.F. and special contacts
(show looking on to mating face)- Male : Number of cavities on right and number of cavities on letft- Female : Number of cavities on left and number of cavities on right
00 or omit No special contacts
INSUlATOR BODYWith L.F. and special contacts
SERIES CODE
TERMINATION STYlEY7 Straight PC contact (Male = 3.2mm tail ; Female = 3.1mm tail)
Y9 Straight PC contact (Male = 4.6mm tail ; Female = 4.5mm tail)
C Crimp for wire (24-28 AWG)
D Crimp for wire (22 AWG)
jACkSCREW *A, B, C, H For female connectorP, Q, Y, Z For male connector0 Without jackscrew
GENDERM : male - F : female
LAYOUT TABLE
COAX AND POWER CONTACTS0 1 2 3 4 5 6
l.F.
CONT
ACTS 10 6 - - - - -
18 14 10 6 - - -26 22 18 14 10 6 -34 30 26 22 18 14 1042 38 34 30 26 22 18
INSUlATOR BODYWith L.F. contacts
* See to catalog Micronector 220 - pages 9 & 15