18-25 dB(A) Residential GradeThe ATEX-A202-4100 is a Residential Grade Spark Arresting Silencer that is constructed from heavy duty 316L Stainless Steel that is excellent for use on stationary, marine, and mobile power units in harsh environments. It is designed for use on the exhaust of internal combustion engines where the potential for fire hazards exists and where the surrounding environment requires a moderate level of silencing. Centrifugal force separates solids from the exhaust gas stream where solids are then deposited in an easily accessible cleanout.

Standard Construction: • Complies with European Directive 94/9/EC Requirements • ABS Type Approved Product • Asbestos Free Construction • Meets requirements of ASTM F2876-10 • 316L Stainless Steel (5 year warranty) • Horizontal or Vertical Mounting • Cuff inlet/Tube outlet (6” & Under) • ANSI Flanges on Inlet & Outlet (8” & Larger) • Easy Cleanouts on Particle Trap Options: (Limited Options as per ATEX Req’s) • Inlet and Outlet Connections & Locations • Silencer Length & Diameter • Air Leak Tests Accessories: • Horizontal Mounting Saddles • Horizontal Mounting Brackets • Vertical Mounting Legs • A full complement of accessories are listed on the reverse side and at: www.gtexhaust.com

Manufacturing for over 30 years in Nebraska:

4121 NW 37th Lincoln, NE 68524 888-894-3726 www.gtexhaust.com

CB

DRAINSPARK TRAP

FLOWA

B D

GA

SPARK TRAPDRAIN

F

FLOW

* Dimensions in inches. Dimensions are nominal and may vary slightly with production models. * Request certified drawings for exact dimensions. * F-Max is for inlet only.

ATEX-A202-41015 1.5 6 30 27 3 9 5 13ATEX-A202-4102 2 6 36 33 3 12 6 15ATEX-A202-41025 2.5 8 42 39 4 14 7 24ATEX-A202-4103 3 8 42 39 4 11 7 24ATEX-A202-41035 3.5 10 46 43 5 15 8 34ATEX-A202-4104 4 10 46 43 5 15 8 34ATEX-A202-4105 5 10 54 51 6 18 9 39ATEX-A202-4106 6 12 54 51 6 17 9 48ATEX-A202-4108 8 18 61 57 8 17 13 133ATEX-A202-4110 10 22 74 71 12 21 15 199ATEX-A202-4112 12 26 75 72 13 20 17 332ATEX-A202-4114 14 30 100 97 15 31 19 444ATEX-A202-4116 16 36 114 111 17 41 22 616ATEX-A202-4118 18 36 126 123 18 41 22 783ATEX-A202-4120 20 42 139 136 20 45 25 1070ATEX-A202-4122 22 48 141 138 22 43 29 1255ATEX-A202-4124 24 54 142 139 24 40 31 1482

Part Number A B C D F F G WTInlet Size Dia OAL OAL (min) (max) Flange Center (lbs)

ATEX-A202-4100 Certified Spark Arresting Silencer

EN1834-1:2000, EN1834-2:2000, EN1834-3:2000 Compliant

ABS Type Approved Product

Ref. #: PDS-201208-ATEX-A202-4100-02

OPTIONAL CONSTRUCTION FEATURES AND ACCESSORIES Construction features for ATEX products are limited by ATEX Certification requirements • Sizes 6” and Below come standard with an ID Cuff / OD Tube connections • Sizes 8” and Above come standard with ANSI Flanged connections • Additional connections are available • All spatial dimensions are in Inches • F-Max is for inlet only (ATEX-A202 products) • See GT Exhaust Silencer Catalog for part number selection GT Exhaust offers a full line of accessories for your silencer including: • Special Inlet and Outlet Connections • ANSI Patterned Flanges • Inlet Connections • Outlet Connections • Tube Couplers • Horizontal and Vertical Shell Legs • Vertical Mounting Lugs • Horizontal Mounting Saddles

Rain Cap

Thimble

Mitered or Formed Elbow

Flex or Bellows

• Mounting Rings • Mounting Brackets • Clamps • Elbows – Mitered & Formed • Nut/Bolt/Gasket Kits • Corrugated Flex Connections • Bellows • Wyes • Expansion Joints

• Drain Cocks • Pipe Hangers • Rain Guards • Rain Caps – Standard & Heavy Duty • Cones – Flanged & Unflanged • Thimbles • Roof Jacks • Thermal Wrap

ATEX-A202-4100 Certified Spark Arresting Silencer