ATEC HERRAMIENTAS.pdf
-
Upload
transmisiones-automaticas-bricar -
Category
Documents
-
view
122 -
download
20
Transcript of ATEC HERRAMIENTAS.pdf
Contact Your Local Distributor PH: 1-800-531-5978 24 Hr. FAX 210-225-2114
or Mobile Tool Truck Dealer www.atec-trans-tool.com
TTRRAANNSSMMIISSSSIIOONN SSEERRVVIICCEE
a. Case Sleeving ....................................30
b. Bushing Driver Kits &
Accessories ......................................31-32
c. Transmission-Support &
Holding ..............................................33
d. Air Test Plates....................................34
e. Clutch Spring
Compressors ....................................35
f. Specialty Tools &
Equipment ..........................................36-38
Since 1978
ATEC Trans-Tool
has maintained
a reputation for
manufacturing and
suppling the most
complete line of
specialty tools and
equipment for the
transmission
industry.
TR
AN
SM
ISS
ION
GE
N. T
OO
LS
-EQ
UIP
TRANSMISSIONGENERAL TOOLS
& EQUIPMENT
29
FEATURED PRODUCTS
SeePage 31
SeePage 37
SeePage 42
SeePage 35
T-0220-39MASTER BUSHING
DRIVER KIT
T-0015
SeePage 36
T-0170- M T-0171
T-0156-A
METAL VALVE BODY SMALLPARTSTRAY
TRANSMISSIONFOOT PRESS
CLUTCHDRUMSPRINGCOMPRESSOR
FULL LINE TRANSMISSIONSUPPORT-HOLDING FIXTURES
UNIVERSAL LIPSEAL INSTALLER
Specifications and descriptions on products in this catalog may change without notice.
Copyright ©2007 ATEC Trans-Tool
All intellectual property and
copyrights reserved.
T-0158-HD
SeePage 33
Reproduction of this material in whole or in part is strictly prohibited
without prior written consent by ATEC Trans-Tool, LP, including all
part numbers, drawings, pictures, logos, or descriptions.
Reproduction of any or any part of these items is civilly and/or
criminally punishable by law.
TRANSMISSION TOOLS & EQUIPMENT
Case Sleeving Tool Kits
Contact Your Local Distributor PH: 1-800-531-5978 24 Hr. FAX 210-225-2114
or Tool Truck Dealer www.atec-trans-tool.com
TRANSMISSION SERVICE
30104-A
T-0107
T-0107-D
T-0
T-0
T-0
Governor Bore RepairTool GM 350, 400
Output Shaft Rear Washer CaseResurfacing Tool KitFor Ford C6
Governor Bore BushingFor GM 350, 400
For T-0107 & T-0107-D
Governor Bore Bushing Driver
Governor Bore Case Sleeving Tool KitFor FIOD-AOD (RWD) w/ Overdrive)
T-1690-SL-E AODE
TR
AN
SM
ISS
ION
GE
N.
TO
OL
S-E
QU
IP
Our case sleeving tools allow rebuilders tobore out worn areas of a transmission case,such as the governor bore, and install a sleevein this area. With more cases becoming hard-to-find and prices increasing, these tool kitswill reduce rebuilding costs by quickly andeasily refurbishing a case to be rebuilt.
T-0495
T-0495-SL
T-1116
T-1116-SL-A
T-1116-SL-B
T-1195
T-1195-SL
T-1695-SL
T-1695
T-2195
T-2195-SL
T-2494
T-2494-SL
T-2495
T-2495-SL
T-2795
T-2795-A
T-2795-SL
T-2995
T-2995-SL
Rear Case Bushing Sleeving ToolKit For Ford C6 (‘66-’80)
Use T-2795-A adaptor for E4OD (RWD)
Bushing Replacement For T-1116 (front w/ oil grooves)
Bushing ReplacementFor T-1195
Governor Bore CaseSleeving Tool Kit For GM 180/180C/Postal Vehicles
Bushing Replacement For T-1695
AOD onlyT-1690-SL-EBushing Replacement AODE only
Governor Bore Case Sleeving Tool KitFor Toyota, Isuzu, Volvo (RWD)
Bushing Replacement For T-2195
Bushing ReplacementFor T-2795
E4OD (RWD) AdaptorFor T-1093, T-2795Cuts case surface where the output shaft’s rear washer isseated, creating the ability to install an oversized heavy dutybronze washer which will save the worn case.
Rear BushingCase Boring ToolFor 4L80E
Bushing Replacement For T-2995
30
Governor Bore CaseSleeving Tool KitFor Ford C3, A4LD (RWD)
Bushing ReplacementFor T-0495
Oil Pump Needle Bearing & Seal Tool For Ford AXOD
Bushing Replacement For T-2494
Valve Body Cover PumpDriveshaft Bore Repair Tool
Bushing Replacement For T-2495
Bushing Replacement For T-1116 (rear w/o oil grooves)
Reproduction of this material in whole or in part is strictly prohibited without prior written consent
by ATEC Trans-Tool, LP, including all part numbers, drawings, pictures, logos, or descriptions.
Reproduction of any or any part of these items is civilly and/or criminally punishable by law.
TRANSMISSION TOOLS & EQUIPMENT
T-0
Contact Your Local Distributor PH: 1-800-531-5978 24 Hr. FAX 210-225-2114
or Mobile Tool Truck Dealer www.atec-trans-tool.com
TRANSMISSION SERVICE
T-0220-19 T-0220-20
T-0220-DRO6A
T-0280-C
Bushing Driver KitsBUSHING DRIVER KIT19 Piece Solid Steel Kit
CHISELBUSHING CUTTERSEAL REMOVER* Use curl cut method* Also use as tailpipe cutter
TR
AN
SM
ISS
ION
GE
N. T
OO
LS
-EQ
UIP
BUSHING DRIVER KIT20 Piece Solid Steel Kit
To be used to update the T-0220-20 bushing driver kit
to make a complete 39 piece kit
Drives most popular domestic bushings. Can be
expanded in the future with T-0220-19
FORDA4LD, AOD
ATX, C3,
C 4/5, C6,
FMX, Jatco
CHRYSLERA404/413/470
727
904/999
T-0220-EXEXTENSION DRIVERHANDLEFor Multiple Step BushingDriver Kits Only
LONG UNIV. BUSHINGDRIVER HANDLE
31
T-1093
T-0220-39MASTER BUSHING DRIVER KIT- 39 PC
GM125/125C
180/180C
200/200-4R/200C
250/250-C
325/325-4L
350/350C
400, 440-T4
700-R4
Powerglide
Super Turbine 300
Most complete kit in the industry. Drives over 200 different bushing - foreign & domestic
Comes complete with numbered application chart and board
All bushing drivers available individually For longer driver handle, order T-0220-DR06A
T-0220-30
BUSHINGDRIVERKIT30 Piece
UNIVERSAL DRIVERHANDLE
For threadedbushing drivers
Reproduction of this material in whole or in part is strictly prohibited without prior written consent by ATEC Trans-Tool, LP, including all part numbers, drawings, pictures, logos,
or descriptions. Reproduction of any or any part of these items is civilly and/or criminally punishable by law.
TRANSMISSION TOOLS & EQUIPMENT
Bushing Driver Kits
T-0220-RMUNIVERSAL BUSHINGREMOVER KIT
For use with T-0154-HD &
T-0154-C
Contact Your Local Distributor PH: 1-800-531-5978 24 Hr. FAX 210-225-2114
or Tool Truck Dealer www.atec-trans-tool.com
T-0220-US-5
TRANSMISSION SERVICE
T-0220-US-4
T-0220-700R4
T-0220-440MM
T-0220-350
T-0220-US-3
T-0220-AOD
T-0220-USAFE
T-0220-US-1
STABILIZERBUSHING & SEALGM ‘80 and up
either side
STABILIZERBUSHING & SEALGM ‘85 and up
(440T4) either side
BUSHING DRIVER KIT
For GM 700-R4
BUSHING DRIVER KIT
Fits metric bushing in
GM 440T4
BUSHING DRIVER KIT
For GM 250, 250C,350, 350C
3 Piece Multiple StepBushing Driver Kit
STABILIZERBUSHING & SEALChrysler ‘78 and upleft side - narrow
STABILIZERBUSHING & SEALChrysler ‘78 and up
right side - narrow
BUSHING DRIVER KIT
For Ford AOD
DRIVER KIT FORSTABILIZERBUSHING SEALS10 Piece KitChrysler, GM, Ford, others
STABILIZERBUSHING & SEALChrysler ‘78 and up
left side - standard
TR
AN
SM
ISS
ION
GE
N.
TO
OL
S-E
QU
IP
T-0220-US-6STABILIZERBUSHING & SEALFord ‘85 and up
either side
T-0220-US-2
32
T-0220- RIBEARING RACE INSTALLER Patented
* Adjustable for all races
1 9/16” to 2 7/16” I.D.
* Impact resistant head for
positive dead blow drive
* Can use extension driver
T-0220-TH
T-0220-THLong Dead BlowExtension Driver
(use with T-0220- RI)
Reproduction of this material in whole or in part is strictly prohibited without prior
written consent by ATEC Trans-Tool, LP, including all part numbers, drawings, pictures,
logos, or descriptions. eproduction of any or any part of these items is civilly and/or
criminally punishable by law.
TRANSMISSION TOOLS & EQUIPMENT
T-0
Contact Your Local Distributor PH: 1-800-531-5978 24 Hr. FAX 210-225-2114
or Mobile Tool Truck Dealer www.atec-trans-tool.com
TRANSMISSION SERVICE
T-0156-A
T-1200
T-1200-F
T-2409-F
T-0156-AF
T-0156-B
T-0156-BF
T-0156-BB
T-0156-KM
T-2018-F
T-2800-F
Includes Base
For GM 125/125C
GM 440-T4
* Bench mounts
Transmission Support & Holding Fixtures
Without Base(Same features as above)
Includes Base
* Bench mounts
* Full 360 degree swing
* 90 degree locking
increments
* Fits popular domestic &
foreign transmissions
Without Base(Same features as above)
Includes Base
* Bench mounts* Full 360 degree swing* 90 degree locking
increments* All steel construction* Allows work comfort at
any angle* Allows easy access to
work on valve body
Without Base(Same features as above)
HOLDING FIXTUREBASE
(Adapts To:)T-0156-AF T-0156-BF
T-1200-F T-2409-F
T-2800-F T-0156-B
Bench Mounts
UNIVERSAL HOLDINGFIXTURE BASE
For use with T-2018-F GM holding fixture
Bench Mounts
TRANSMISSIONHOLDING FIXTURE
GM TRANSMISSIONHOLDING FIXTURE
GM TRANSMISSIONHOLDING FIXTURE
TR
AN
SM
ISS
ION
GE
N. T
OO
LS
-EQ
UIP
FORDTRANSMISSION
HOLDING FIXTURE
FORDTRANSMISSION
HOLDING FIXTURE
Without Base(For Base Order
T-0156-BB)
For Ford E40D
GM TRANSMISSIONHOLDING FIXTURE Without Base
(For Base OrderT-0156-KM )
For GM 4T40-E
* Bench mounts
33
GENERAL SERVICESUPPORT AND HOLDING FIXTURES
ON PAGES 17
Without Base(For Base Order
T-0156-BB)
For Ford Transaxles
Reproduction of this material in whole or in part is strictly prohibited without prior
written consent by ATEC Trans-Tool, LP, including all part numbers, drawings, pictures,
logos, or descriptions.Reproduction of any or any part of these items is civilly and/or
criminally punishable by law.
TRANSMISSION TOOLS & EQUIPMENT
Air Test Plates
Contact Your Local Distributor PH: 1-800-531-5978 24 Hr. FAX 210-225-2114
or Tool Truck Dealer www.atec-trans-tool.com
T-2147
TRANSMISSION SERVICE
T-1442
T-1617
T-2017
TR
AN
SM
ISS
ION
GE
N.
TO
OL
S-E
QU
IP
Air test plates allows testing a transmission for leaks and valve body performance without complete
reassembly or filling the transmission with fluid. Our air test plates are machined for reliable testing
Applications ..........................Page ..............Part Number
125C (3T40) ..............41..............T-1237180C (3L30) ..............42..............T-1047200C..........................45..............T-1087200-4R ......................45..............T-1717250, 350 ....................48..............T-1017350C..........................48..............T-1017-A325-4L..........................................T-1117400 (3L80) ................51..............T-1247440-T4 (4T60) ..........52..............T-2017
(4T60-E) ..............52..............T-2017-A700-R4 (4L60) ..........58..............T-1517
(4L60-E) ..............58..............T-1517-A(4L80-E) ....................61..............T-2917
Applications ..........................Page ..............Part Number
C-3 ............................64..............T-0417A4LD / 5R55E / 4R44E 67..............T-2617C-6 ............................69..............T-0427AOD ..........................74..............T-1617AODE / 4R70W ........74..............T-1617-AATX............................77..............T-1817AXOD ........................82..............T-2417AXOD-E ....................82..............T-2417-AE4OD / 4R100 ..........84..............T-28174EAT, G4AEL ............98..............T-2717
Applications ..........................Page ..............Part Number
A-500, 904, 727 ........92..............T-1317A-604 ........................93..............T-1442404, 413, 470 ............91..............T-1427A-606 ........................95..............T-3217
Applications ..........................Page ..............Part Number
Toyota 130 ................100............T-2147Hyundai........................................T-5217Suzuki ..........................................T-5117
GENERAL MOTORS
FORD
CHRYSLER
34
MISCELLANEOUS
Reproduction of this material in whole or in part is strictly prohibited without prior written consent by ATEC
Trans-Tool, LP, including all part numbers, drawings, pictures, logos, or descriptions.Reproduction of any or
any part of these items is civilly and/or criminally punishable by law.
TRANSMISSION TOOLS & EQUIPMENT
T-0
Contact Your Local Distributor PH: 1-800-531-5978 24 Hr. FAX 210-225-2114
or Mobile Tool Truck Dealer www.atec-trans-tool.com
TRANSMISSION SERVICE
T-0157
T-0158- SP
T-0158- SPA
T-0158- ZF18T-0157- K
T-0158
T-0158- J
T-0158- HD
T-0158- 4L
T-0171- J
T-0171- A
T-0171
SNAPRESS CLUTCH SPRING COMPRESSOR
Clutch Spring Compressors
SNAPRESS UPDATE KITUpdates early model
Snapress * compressors to
the T-0158-SP version
3-4 CLUTCH SPRINGCOMPRESSORADAPTER
For ZF-HP18
UNIVERSAL QUICKLOCK SPRING COMPRESSOR
TRANSMISSIONCLUTCH SPRINGCOMPRESSOR
JAWSFor T-0158
CLUTCH DRUMSPRING COMPRESSOR
MOST ECONOMICAL
* Long legs for deepdrums
* Mounts on work benchor vise
For removal of snap rings
in drum.
For removal of snap rings
in rear of case.
Includes longer legs for
late model transmissions.
SPRING COMPRESSORLEG SETFor use with T-0158-HD
and T-0171 only
ADJUSTABLE SPRINGCOMPRESSORADAPTERFits T-0171
* Compresses 3 areas for
more positive action.
* A simple twist for all
adjustments
* Heavy duty construction
TR
AN
SM
ISS
ION
GE
N. T
OO
LS
-EQ
UIP
COMPRESSION RING KIT
(available individually)Only tool you will need toremove clutch pistons fromvirtually all automatictransmissions, foreign anddomestic* Adapters included for
Ford ATX, AOD, AXOD* Use on clutch drums with
center shafts.
TRANSMISSIONFOOT PRESS
T-0171- B
T-0171- C
35
[Order adapter T-1456 foruse on Chrysler 604]
Small loop
Cone shape
Large loop
INDIVIDUALADAPTERS
Reproduction of this material in whole or in part is strictly prohibited without prior written consent by ATEC Trans-Tool, LP, including all part numbers, drawings, pictures, logos,
or descriptions. Reproduction of any or any part of these items is civilly and/or criminally punishable by law.
TRANSMISSION TOOLS & EQUIPMENT
Specialty Tools And Equipment
Contact Your Local Distributor PH: 1-800-531-5978 24 Hr. FAX 210-225-2114
or Tool Truck Dealer www.atec-trans-tool.com
T-0170- A
TRANSMISSION SERVICE
T-0170
T-0030- A
T-0007
T-0004 T-0033- A
VALVE BODY PARTSTRAY
* Made of oil resistant
plastic
* 13.5” x 18”
* 30 compartments keep
valve body parts
separated
SMALL PARTS TRAY
GET ORGANIZED
* Made of oil resistant
plastic
* 13.5” x 18”
* 15 compartments
“ H ” GAUGE UNIVERSAL FRONT PUMP CLEARANCE GAUGE
Longer, more coverage
UNIVERSAL SPEEDOMETERDRIVEN GEAR REMOVER
VALVE BODY LOCKPIN REMOVER
HEAVY DUTY FRONTPUMP REMOVER* E-Z removal of Ford, GM
and Chrysler front pumps.
* Quick change boots
adapt for GM & Chrysler
* Slide hammer adaptable
* Removes pump without
it rocking
TR
AN
SM
ISS
ION
GE
N.
TO
OL
S-E
QU
IP
T-0004- RTREPLACEMENT TIP
T-0033UNIVERSAL PUMPREMOVER
Quickly removes
conventional type pumps
without damage
36
T-0015UNIVERSALLIP SEAL INSTALLER
T-0164PLUG - A - SEAL
T-0153- HDFRONT PUMP &SPEEDOMETER GEARREMOVER
Reproduction of this material in whole or in part is strictly prohibited without prior
written consent by ATEC Trans-Tool, LP, including all part numbers, drawings, pictures,
logos, or descriptions.Reproduction of any or any part of these items is civilly and/or
criminally punishable by law.
TRANSMISSION TOOLS & EQUIPMENT
T-0
Contact Your Local Distributor PH: 1-800-531-5978 24 Hr. FAX 210-225-2114
or Mobile Tool Truck Dealer www.atec-trans-tool.com
TRANSMISSION SERVICE
T-0170- M
T-0222
T-0222- A
T-1052
T-1081
Specialty Tools And Equipment
GM & CHRYSLERFRONT PUMP ALIGNMENT BAND
The only tool needed formost GM & Chryslertransmissions
FORD FRONT PUMPALIGNMENT BAND
UNIVERSAL TORQUECONVERTER LEAKTESTER
* Fits domestic & foreign
* Includes fittings and
adapters
* Detects even smallest
leaks
* Instruction Manual
CONVERTER HOUSINGSEAL REMOVERUse with T-0154-HD
T-0099
TR
AN
SM
ISS
ION
GE
N. T
OO
LS
-EQ
UIP
RPK-1052REPLACEMENT PARTSKIT FOR T-1052
T-1091PULSATING TRANSMISSION COOLER FLUSHER
Flushes cooler before
installing rebuilt
transmission.
Air operated.
Removable filter.
Includes adapters
and hoses.
No solvents.
37
T-3425COOLER LINE BANJO FITTINGS* Quick easy hook-up for
flushing transmissioncooler
* Use w/ large flusher oraerosol cans
For Ford 4R20E, 4EATChrysler diesel truck,Mazda, Nissan, Iinfinity,B.M.W., Mercedes
OIL COOLERLINE FLUSHER
* Completely self contained* Closed filtering system
reuses cleaning fluid* Positive displacement
pump* Carbon bearings for
heavy-duty operation* All bronze pump body* Replaceable filter
cartridge* Heavy-duty motor* Includes: hoses, filter
and fittings* Ready for operation* A must for late model
and lock up units
T-1090- HD
REPLACEMENT FILTER(For T-1090-HD...above)
001730
METAL VALVE BODYSMALL PARTS TRAY
* Heavy duty metal
construction
Reproduction of this material in whole or in part is strictly prohibited without prior
written consent by ATEC Trans-Tool, LP, including all part numbers, drawings, pictures,
logos, or descriptions.Reproduction of any or any part of these items is civilly and/or
criminally punishable by law.
TRANSMISSION TOOLS & EQUIPMENT
Specialty Tools And EquipmentT-3237TRS ALIGNMENTTOOL
Universal
Contact Your Local Distributor PH: 1-800-531-5978 24 Hr. FAX 210-225-2114
or Tool Truck Dealer www.atec-trans-tool.com
TRANSMISSION SERVICE
T-3236
T-5033- K
UNIVERSALBEARING SPLITTER
Heavy duty fixture for
removing bearing and
gears
REVERSE CLUTCHFEED OIL PIPE SEALINSTALLER KIT
(4 Pieces)
AXOD, 125, 125C, 200,
200C, 200-4R
Also sold separately.
TR
AN
SM
ISS
ION
GE
N.
TO
OL
S-E
QU
IP
38
GM 350 ADAPTER PLATE
* Replace the Chevrolet
350 & 400 transmission
with the plentiful B.P.O.C.
350 & 400
* Replace the 4-speed
stick with the super
performance B.P.O.C.400
T-3020DRAIN PLUG KIT
* Installs with one simple
drilled hole
* Eliminates oil spills
when changing fluid
or rebuilding
T-3237
30110
- - WANTED NEW TOOLS - -
IF YOU HAVE SUGGESTIONS FORTOOLS YOU WOULD LIKE TO SEE
INCLUDED IN OUR LINE OF PRODUCTS PLEASE DROP US AN
EMAIL OR LETTER WITH A COMPLETE DESCRIPTION OF THEPRODUCT AND, IF POSSIBLE, A
PHOTO, ADVERTISEMENT OR FLYER.
T-8010TRANSMISSIONTEMPERATUREGAUGE
* 150 - 320 degrees
* Includes mounting
bracket, lamp and
sending unit
T-9201“ONE FITS ALL”GRINDING WHEEL
* Super abrasive
cutting properties
* Lasts up to ten times
longer than
regular wheels
* Use of corner cutters
eliminated
T-1033
T-2433
T-1033-A
T-1233
NEW ITEM
IMAGENOT
AVAILABLEReproduction of this material in whole or in part is strictly prohibited without prior
written consent by ATEC Trans-Tool, LP, including all part numbers, drawings, pictures,
logos, or descriptions.Reproduction of any or any part of these items is civilly and/or
criminally punishable by law.
Contact Your Local Distributor PH: 1-800-531-5978 24 Hr. FAX 210-225-2114
or Mobile Tool Truck Dealer www.atec-trans-tool.com
AUTOMATICTRANSMISSION
SPECIFIC TOOLS
FOR: GENERAL MOTORS
Transmission Type
a. 125, 125C (3T40) (3T40-E)..................40-41
b. 180, 180C (3L30) (4L30-E)..................42-43
c. 200, 200C, 200-4R ..............................44-45
d. 250, 250-C, 350, 350C ........................46-48
e. 325, 325-4L ..........................................49
f. 375, 400 (3L80), 425, 475 (3L80-HD) 50-51
g. 440-T4, F7, (4T60) (4T60-E) (4T65-E) 52-54
h. (4T40-E) ..............................................55
i. (4T80-E) ..............................................56
j. 700-R4 (4L60) (4L60-E) ......................57-59
k. (4L80-E) ..............................................60-61
l. Powerglide. ........................................62
m. JF403-E (Nissan) ................................62
GM
TR
AN
SM
ISS
ION
TO
OL
S-E
QU
IP
FEATURED PRODUCTST-1503
SeePage 58
SeePage 53
SeePage 58
39
GENERAL MOTORS
OLD TO NEW
TRANSMISSION
CONVERTIONS
125C ........................(3T40)
180C ........................(3L30)
180C-4 Spd Elec......(4L30-E)
400............................(3L80)
4 Spd Elec................(4L80-E)
440-T4 ......................(4T60)
440-T4 Elec ..............(4T60-E)
475 (HD400) ............(3L80-HD)
700-R4 ......................(4L60)
700-R4 Elec..............(4L60-E)
MH1 ..........................(4T80-E)
4 Spd FWD ..............(4T40-E)
T-2926
T-1055T-2004OIL PUMP REMOVER
T-1574INPUT SHAFT TEFLON SEALINSTALLATIONKIT
Specifications and descriptions on productsin this catalog may change without notice.
Copyright ©2007 ATEC Trans-Tool
All intellectual property and
copyrights reserved.
SeePage 42
CLUTCHDRUMSPRINGCOMPRESSOR
T-0158-HD
SeePage 61
FOURTH CLUTCH PISTON &HOUSING LIP SEAL
INSTALLERPROTECTORKIT
STATOR SHAFT TEFLONSEALINSTALLERRESIZER
TURBINE SHAFT TEFLONSEAL INSTALLER-RESIZER
SeePage 59
Reproduction of this material in whole or in part is strictly
prohibited without prior written consent by ATEC Trans-Tool,
LP, including all part numbers, drawings, pictures, logos, or
descriptions.Reproduction of any or any part of these items is
civilly and/or criminally punishable by law.
AUTOMATIC TRANSMISSION TOOLS
T-1112
T-0
CUP PLUG INSTALLER
(Also 325, 325-4L)
Contact Your Local Distributor PH: 1-800-531-5978 24 Hr. FAX 210-225-2114
or Tool Truck Dealer www.atec-trans-tool.com
T-1205
GENERAL MOTORS
T-1203
T-1059-HD
T-1059- B
T-1264T-1202- A
T-0154- HD
T-0154- E
T-1200
T-1201
SEAL BEARING RACEINSTALLER
[ Use with T-1093]
(Also 440-T4, 4T60-E)
OUTPUT SHAFT LOAD-ING ANDALIGNING TOOL
(Also 325, 325-4L, 440-T4,
4T60-E)
METAL LO-REVERSECLUTCH CENTER SUP-PORT UNIT REMOVER-INSTALLER* Positive locking action.
Works with or without
bushing intact
* Built-in slide hammer - to
remove “bound” housings.
(Also 200, 200C,325, 325-4L)
METAL LO-REVERSECLUTCH CENTER SUP-PORT UNIT REMOVER-INSTALLER
(Also 200, 200C,325, 325-4L)
CONVERTER ENDPLAY CHECKERAlso use as a side gear
checking tool(Also 200-4R, 4T60E,
4L60E, 3L80)
CLUTCH ASSEMBLY AND FINAL DRIVE REMOVER-INSTALLER
(Also 440-T4, 4T60-E)
1/2” SLIDE HAMMERADAPTERS
[Use with T-0154-HD]
HOLDING FIXTUREWITH BASE
(Also 440-T4, 4T60-E)
OUTPUT SHAFT C-RING REMOVER &INSTALLER
(Also 440-T4, 4T60-E)
GM
TR
AN
SM
ISS
ION
TO
OL
S-E
QU
IP
125, 125C (3T40) (3T40E)
T-1200- FHOLDING FIXTUREWITHOUT BASE
40
SLIDE HAMMER SETHEAVY DUTY
* With 3/8” threaded
shaft tip
Reproduction of this material in whole or in part is strictly prohibited without prior
written consent by ATEC Trans-Tool, LP, including all part numbers, drawings, pictures,
logos, or descriptions.Reproduction of any or any part of these items is civilly and/or
criminally punishable by law.
AUTOMATIC TRANSMISSION TOOLS
T-0
Contact Your Local Distributor PH: 1-800-531-5978 24 Hr. FAX 210-225-2114
or Mobile Tool Truck Dealer www.atec-trans-tool.com
GENERAL MOTORS
T-1206
T-1263
T-1207
T-1208-A
T-1233T-1274- A
T-1274
AIR TEST PLATE
125, 125C (3T40) (3T40E)
CONVERTERSEAL INSTALLER
PARK NEUTRALSWITCH ALIGNERFor (3T40E)
(Also 4T60E)
AXLE SHAFT PULLERFor (3T40E)
Tripot drive joint ‘81- up
[Use with T-0154-HD]
RIGHT & LEFT AXLESEAL INSTALLER* Installs axle seal without
removal of output shaft,
while in or out of car.
(Also 440-T4)
TURBINE SHAFT SEALINSTALLER - RESIZER
125 cover side only
(Also 440-T4)
TURBINE SHAFT SEALINSTALLER-RESIZER
125C case side only
(Also 440-T4)
125/125C REVERSECLUTCH FEEDOIL PIPE SEALINSTALLER
AXLE SHAFT SEALINSTALLERInstalls axle seal w/o
removal of output shaft
(Use with T-1093)
(Also: 440-T4, 4T60,
4T60-E)
GM
TR
AN
SM
ISS
ION
TO
OL
S-E
QU
IP
41
T-1238
T-1239
AXLE SHAFT REMOVER
[Use with T-0154-HD]
BAND APPLY PINGAUGE
T-1237
T-1208
BOOT SEAL CLAMPINSTALLER
T-1217
Reproduction of this material in whole or in part is strictly prohibited without prior
written consent by ATEC Trans-Tool, LP, including all part numbers, drawings, pictures,
logos, or descriptions.Reproduction of any or any part of these items is civilly and/or
criminally punishable by law.
AUTOMATIC TRANSMISSION TOOLS
180, 180C (3L30) (4L30-E)
T-0158- HDCLUTCH DRUMSPRING COMPRESSOR
(Other models on pg 49)
Contact Your Local Distributor PH: 1-800-531-5978 24 Hr. FAX 210-225-2114
or Tool Truck Dealer www.atec-trans-tool.com
GENERAL MOTORS
T-1080
T-0154- HD
T-0134
T-0131
T-0085
T-0030- A
SAME AS ABOVE FORPOSTAL VEHICLES
HEAVY DUTY SLIDEHAMMER SET
With 3/8” threaded shaft tip
FRONT PUMP SEALINSTALLER
EXTENSION HOUSINGSEAL INSTALLER
AIR TEST PLATE
FRONT PUMP SEALER TOOL
“ H “ GAUGE UNIVERSAL FRONTPUMP CLEARANCEGAUGELonger more coverage
EXTENSION HOUSINGBUSHIING REMOVER-INSTALLER & OUTPUTSHAFT SUPPORTFIXTURE
GM
TR
AN
SM
ISS
ION
TO
OL
S-E
QU
IP
T-0160EXTENSION HOUSINGBUSHING REMOVERAND INSTALLER
(Also 200, 200C, 200-4R)
T-1001- PV
Longer Version
T-1080- PV
CONVERTER HOUSING TO FRONTPUMP ALIGNMENT Early 1969-1981 No 4L30E
42
T-1068FRONT END PLAYCHECKING ADAPTERFor (4L30-E)
[Use with T-1055]
T-0160- A
T-1047
T-1055OIL PUMP REMOVERFor (4L30-E)
T-1001SHIFT LEVER SEALREMOVER-INSTALLER
Does not require
draining fluid
SHIFT LEVER SEALREMOVER-INSTALLER
Does not require
draining fluid
Reproduction of this material in whole or in part is strictly prohibited without prior
written consent by ATEC Trans-Tool, LP, including all part numbers, drawings, pictures,
logos, or descriptions.Reproduction of any or any part of these items is civilly and/or
criminally punishable by law.
AUTOMATIC TRANSMISSION TOOLS
Contact Your Local Distributor PH: 1-800-531-5978 24 Hr. FAX 210-225-2114
or Mobile Tool Truck Dealer www.atec-trans-tool.com
GENERAL MOTORS
180, 180C (3L30) (4L30-E)
GM
TR
AN
SM
ISS
ION
TO
OL
S-E
QU
IP
43
T-1080-A
T-1081
PUMPALIGNMENTTOOL
4L30E
CONVERTER HOUSING TO FRONTPUMP ALIGNMENTTOOL Late 1982-UpPontiac OnlyNo postal vehicles3L30E
CONVERTER HOUSING SEAL REMOVER
[Use with T-0154-HD
T-0099 ]
T-1080- B
T-1082
T-1085- A
T-1088
T-1089
SECOND CLUTCHPISTON SEAL INSTALLER ANDPROTECTOR
THIRD CLUTCH SNAP RING COMPRESSOR
Late ‘79 - up
OIL PUMP SUN GEARINSTALLER
[Use with T-1093]
SERVO PISTONRING INSTALLER
T-2012
T-2014
REAR HUB HOLDINGTOOLFor 4L30-E
Also hold axle flange &
transmission flange.
CRANKSHAFT HUBHOLDING FIXTUREFor 4L30-E
To allow removal of the
hold-down nut.
EXTENSION HOUSINGSEAL INSTALLERFor 4L30-E
Used to install to the
proper depth.
T-2013
T-2039OVERRUN CLUTCHSPRINGCOMPRESSORADAPTER
ALIGNMENT PINFor 3L30, 4L30-E
2 required(Also 250, 350)
TURBINE SHAFT SIZINGRING TOOL
[For 4L30E]
T-2040
T-2041
SERVO-3rd CLUTCHSPRINGCOMPRESSORFor 3L30, 4L30-E
T-2143
T-1264CONVERTER ENDPLAY CHECKERAlso use as a side gear
checking tool(Also 200-4R, 4T60E, 4L60E, 3L80)
Reproduction of this material in whole or in part is strictly prohibited without prior
written consent by ATEC Trans-Tool, LP, including all part numbers, drawings, pictures,
logos, or descriptions.Reproduction of any or any part of these items is civilly and/or
criminally punishable by law.
AUTOMATIC TRANSMISSION TOOLS
200, 200C, 200-4R
SHIFT LEVER SEALREMOVER-INSTALLER
Contact Your Local Distributor PH: 1-800-531-5978 24 Hr. FAX 210-225-2114
or Tool Truck Dealer www.atec-trans-tool.com
GENERAL MOTORS
T-0160- A
T-0160
T-1033
T-1033- A
FRONT PUMP ALIGNMENT BAND
LINE A PUMP KIT
EXTENSION HOUSINGBUSHING REMOVER-INSTALLER &OUTPUT SHAFTSUPPORT FIXTURE*Speeds up process
EXTENSION HOUSINGBUSHING REMOVERAND INSTALLERCan be used while in car
(Also: 3L30)
GM
TR
AN
SM
ISS
ION
TO
OL
S-E
QU
IP
44
T-0222
T-0030- A
T-0033
T-0156- B
T-0131EXTENSION HOUSINGSEAL INSTALLER
HEAVY DUTY FRONTPUMP REMOVER
HOLDING FIXTUREWITH BASE
FIXTURE W/O BASE
“H“ GAUGE UNIVERSAL FRONT PUMPCLEARANCE GAUGE
T-0156- BF
T-0166
T-1001T-0126
T-0127
ACCUMULATOR PISTONCOMPRESSOR ADAPTER
(Also: 375, 400, (3L80) 475 (3L80-HD)
ACCUMULATOR-SERVO PISTON REMOVER[Use with T-0126]
(Also: 325, 400 (3L80) (3L80-HD)
REVERSE CLUTCH FEED OIL PIPESEAL INSTALLER For 200, 200C
REVERSE CLUTCH FEED OIL PIPESEAL INSTALLER For 2004-R
T-1057LO-REVERSE CLUTCHLIP SEAL INSTALLERAND PROTECTOR
(Also 325, 325-4L)
DIRECT CLUTCH LIPSEAL INSTALLERAND PROTECTOR
(Also 325, 325-4L)
T-1056
OIL PUMP REMOVER& END PLAY TOOL
[Use with T-1068 ](Also 700-R4)
T-1055
T-1264CONVERTER ENDPLAY CHECKER
Reproduction of this material in whole or in part is strictly prohibited without prior
written consent by ATEC Trans-Tool, LP, including all part numbers, drawings, pictures,
logos, or descriptions.Reproduction of any or any part of these items is civilly and/or
criminally punishable by law.
AUTOMATIC TRANSMISSION TOOLS
Contact Your Local Distributor PH: 1-800-531-5978 24 Hr. FAX 210-225-2114
or Mobile Tool Truck Dealer www.atec-trans-tool.com
GENERAL MOTORS
200, 200C, 200-4R
GM
TR
AN
SM
ISS
ION
TO
OL
S-E
QU
IP
45
T-1735
SERVO COVER DEPRESSOR * For use with pan on* On or off car use (Also 700-R4 )
T-1774
T-1727
T-1705
T-1703
T-1760
T-1702
T-1739
TURBINE SHAFT SEALINSTALLER-RESIZER
For 200-4R Only
OVERRUN CLUTCH INNER PISTONLIP SEAL INSTALLER PROTECTOR
For 200-4R Only
FOURTH CLUTCH COMPRESSORAND CENTER SUPPORTREMOVER TOOL
For 200-4R Only
FRONT PUMP SPRINGLOADER TOOL
OUTPUT SHAFT SUPPORT FIXTURE
For 200-4R Only [Use with T-1060]
PRESSURE REGULATOR VALVESNAP RING INSTALLERFor 200-4R Only(Also 700-R4, 4L60)
VALVE BODY AIRTEST PLATE
For 200-4R Only
FORWARD & DIRECT CLUTCHREMOVER & INSTALLER,END PLAY CHECKER AND SHAFTBUSHING REMOVER For 200-4R Only
T-1735
AIR TEST PLATE200C Only
[For 200-R4 use T-1717]
T-1087
T-1072SNAP RING REMOVERAND INSTALLER
T-1717
T-0
T-1059- B
T-1059- HD
METAL LO-REVERSECLUTCH CENTERSUPPORT UNITREMOVER ANDINSTALLER
HEAVY DUTYLO-REVERSE CLUTCHCENTER SUPPORTUNIT REMOVER ANDINSTALLER
(Also 125,
125C, 325, 325-4L )
(Also 125,
125C, 325, 325-4L)
T-1063
T-1060
T-1060- A
T-1068
INTERMEDIATE BANDAPPLY PIN GAUGE(Also: 325, 325-4L)
PUMP SEAL INSTALLER(Also: 700-R4, 4L60)
OUTPUT SHAFT & REARUNIT SUPPORT FIXTURE 200, 200C Only
[For 200-4R must use T-1760]
REPLACEMENT PLUNGER FOR T-1060
END PLAY CHECKINGFIXTURE ADAPTER 245MMTORQUE CONVERTER
OUTPUT SHAFT & REARUNIT SUPPORT FIXTURE
*Doubles as holding fixture
T-1061
T-1060- P
[Use withT-1055)
Reproduction of this material in whole or in part is strictly prohibited without prior
written consent by ATEC Trans-Tool, LP, including all part numbers, drawings, pictures,
logos, or descriptions. Reproduction of any or any part of these items is civilly and/or
criminally punishable by law.
AUTOMATIC TRANSMISSION TOOLS
Contact Your Local Distributor PH: 1-800-531-5978 24 Hr. FAX 210-225-2114
or Tool Truck Dealer www.atec-trans-tool.com
GENERAL MOTORS
GM
TR
AN
SM
ISS
ION
TO
OL
S-E
QU
IP
46
T-0
T-0030- A
T-0151
T-0033
T-0033- A
T-0085
T-0107
T-0107- D
EXTENSION HOUSINGSEAL INSTALLER
REAR CLUTCHSPRING COMPRESSOR
“H” GAUGE UNIVERSAL FRONTPUMP CLEARANCEGAUGE
Longer & more coverage
HEAVY DUTY FRONTPUMP REMOVER
HEAVY DUTY FRONTPUMP REMOVER
FRONT PUMP SEALER TOOL
GOVERNOR BOREREPAIR TOOL
[Use with T-30104-A,
T-0107-D]
GOVERNOR BOREBUSHING DRIVER
[Use with T-30104-A,
T-0107]
FRONT PUMP SEALINSTALLER
T-0134
T-0135LIP SEAL INSTALLERPROTECTOR KIT
Available Individually
T-0135- AT-0135- BT-0135- C
T-0131
T-0127ACCUMULATORSERVO PISTONREMOVER
T-0153- HDFRONT PUMP &SPEEDOMETERGEAR REMOVER
T-0154- HDHEAVY DUTY SLIDEHAMMER SET
With 3/8” threadedshaft tip
Forward
Direct
Intermediate
250, 250C, 350, 350C
Reproduction of this material in whole or in part is strictly prohibited without prior
written consent by ATEC Trans-Tool, LP, including all part numbers, drawings, pictures,
logos, or descriptions. Reproduction of any or any part of these items is civilly and/or
criminally punishable by law.
AUTOMATIC TRANSMISSION TOOLS
Contact Your Local Distributor PH: 1-800-531-5978 24 Hr. FAX 210-225-2114
or Mobile Tool Truck Dealer www.atec-trans-tool.com
GENERAL MOTORS
GM
TR
AN
SM
ISS
ION
TO
OL
S-E
QU
IP
47
250, 250C, 350, 350C
T-0220- EX
T-0
EXTENSION DRIVERHANDLE
For multiple step bushing
driver kits only
T-0220-350
T-0220-20
T-0166T-1001
T-0156- BF
T-0156- B T-0814- A
3 PIECE MULTIPLESTEP BUSHINGDRIVER KIT
BUSHINGDRIVER KIT
(20 Piece)
LINE A PUMP KIT
SHIFT LVER SEALREMOVER-INSTALLER
* Works without
draininig fluid
ABOVE W/O BASE
TRANSMISSIONHOLDING FIXTUREWITH BASE
ACCUMULATOR PRY BAR
T-0160- AEXTENSION HOUSINGBUSHING REMOVER -INSTALLER AND OUTPUT SHAFTSUPPORT FIXTURE
T-1006GOVERNOR HOLDINGFIXTURE
T-0814- CACCUMULATORPRY BARWITH BOLT
For more information
about ATEC products,
log onto our website:
www.atec-trans-tool.com
Reproduction of this material in whole or in part is strictly prohibited without prior
written consent by ATEC Trans-Tool, LP, including all part numbers, drawings, pictures,
logos, or descriptions. Reproduction of any or any part of these items is civilly and/or
criminally punishable by law.
AUTOMATIC TRANSMISSION TOOLS
250, 250C, 350, 350C
Contact Your Local Distributor PH: 1-800-531-5978 24 Hr. FAX 210-225-2114
or Tool Truck Dealer www.atec-trans-tool.com
GENERAL MOTORS
GM
TR
AN
SM
ISS
ION
TO
OL
S-E
QU
IP
48
T-0
T-1071- A
T-1072
T-1039- A
T-1068
30104-A
T-1097
DIRECT CLUTCHACCUMULATORPISTON REMOVERAND INSTALLER
SNAP RING REMOVERAND INSTALLER
STATOR BUSHINGREMOVER-INSTALLER
OIL PUMP REMOVER
[When used with T-1068]
FRONT PUMP ALIGNMENT TOOL
END PLAY CHECKINGFIXTURE ADAPTER245MM TORQUECONVERTER
[Use with T-1055]
GOVERNOR BOREBUSHING
[Use with T-0107,T-0107-D]
30110ADAPTER PLATE 350
* Replace 350 with the
plentiful B.P.O.C. 350
T-1264CONVERTER ENDPLAY CHECKER
T-2041ALIGNMENT PIN
T-1055
T-1017
T-1017- A
AIR TEST PLATE
[For 250, 350C]
FOR 350C ONLY
T-1043- ABUSHING REMOVERAND INSTALLER
2 required(Also: 3L30, 4L30E)
Reproduction of this material in whole or in part is strictly prohibited without prior
written consent by ATEC Trans-Tool, LP, including all part numbers, drawings, pictures,
logos, or descriptions. Reproduction of any or any part of these items is civilly and/or
criminally punishable by law.
AUTOMATIC TRANSMISSION TOOLS
Contact Your Local Distributor PH: 1-800-531-5978 24 Hr. FAX 210-225-2114
or Mobile Tool Truck Dealer www.atec-trans-tool.com
GENERAL MOTORS
325, 325-4L
49
DIRECT CLUTCH LIPSEAL INSTALLER &PROTECTORAlso: 200, 200C, 200-4R
T-1061
T-1001
T-1059-HD
T-0134
T-0085
T-1057
T-1059-B
SNAP RING REMOVERAND INSTALLER
INTERMEDIATE BANDAPPLY PIN GAUGE
SHIFT LEVER SEALREMOVER-INSTALLER* Removes & installs
without draining fluid
* Positive locking action.
Works with or without
bushing intact
* Built-in slide hammer - to
remove “bound” housings
FRONT PUMP SEALINSTALLER
FRONT PUMPSEALER TOOL
REVERSE CLUTCH LIPSEAL PROTECTOR
Also: 200, 200C, 200-4R
METAL LO-REVERSECLUTCH CENTERSUPPORT UNIT REMOVER-INSTALLER
T-1072
T-1056
T-1264CONVERTER ENDPLAY CHECKER
T-1203
T-1112
T-1174
OUTPUT SHAFTLOADING &ALIGNING TOOLAlso: 125, 125C, 440-T4
CUP PLUGINSTALLER
BEARING RACE INSTALLER
TURBINE SHAFTTEFLON SEAL INSTALLER - RESIZER
T-1092
T-1217BOOT SEAL CLAMPINSTALLER
Also: 3L80, 375, 400, 3L80-HD, 475, 4L60,
4L60E, 700-R4, 325, 325-4L, JF403E-GEO
Also: 125,125C,
200, 200C, 200-4R
Also:
125, 125C, 200,
200C, 200-4R
METAL - HEAVY DUTYLO-REVERSE CLUTCHCENTER SUPPORT UNITREMOVER & INSTALLER
Reproduction of this material in whole or in part is strictly prohibited without prior
written consent by ATEC Trans-Tool, LP, including all part numbers, drawings, pictures,
logos, or descriptions. Reproduction of any or any part of these items is civilly and/or
criminally punishable by law.
AUTOMATIC TRANSMISSION TOOLS
375, 400, (3L80), 425, 475 (3L80-HD)
T-0107T-0
GOVERNOR BOREREPAIR TOOL
[Use with T-0107-D]
Contact Your Local Distributor PH: 1-800-531-5978 24 Hr. FAX 210-225-2114
or Tool Truck Dealer www.atec-trans-tool.com
T-0131
GENERAL MOTORS
T-0127
T-0099
T-0085
T-0033- A
T-0126
T-0125
T-0033
T-0030- A
T-0124
EXTENSION HOUSINGSEAL INSTALLER
ACCUMULATORSERVO PISTON REMOVER
UNIVERSALSEAL REMOVER
FRONT PUMPSEALER TOOL
HEAVY DUTY FRONTPUMP REMOVER
REAR GEAR ASSEMBLYREMOVER AND INSTALLER
[Use with T-0099]
ACCUMULATORPISTON COMPRESSORADAPTER
For remover order T-0127
UNIVERSAL PUMPREMOVER
* Quickly removesconventinal type pumpswithout damage.
GOVERNOR BOREBUSHING DRIVER
LIP SEAL INSTALLERPROTECTOR KIT
GM
TR
AN
SM
ISS
ION
TO
OL
S-E
QU
IP
50
T-0128REAR GEAR HOLDINGFIXTURE ADAPTER
[Use with T-0129]
T-0107- D
T-0129HOLDING FIXTURE
[Use with T-0128]
“H” GAUGE UNIVERSAL FRONT PUMPCLEARANCE GAUGE
* Longer, more coverage
[Use with bushing 30104-A] For repair tool order T-0107
T-0124-A Inner; T-0124-B Outer; T-0124-C Intermediate
[Use with T-0126]
* Small shaftFor 400 only
T-0133
T-0134
T-0156- B
EXTENSION SEALINSTALLER
FRONT PUMP SEALINSTALLER
TRANSMISSIONHOLDING FIXTUREWITH BASE
T-0156- BFHOLDING FIXTURE WITHOUT BASE
T-0153-HD
FRONT PUMP AND SPEEDOMETER GEAR REMOVER
Reproduction of this material in whole or in part is strictly prohibited without prior
written consent by ATEC Trans-Tool, LP, including all part numbers, drawings, pictures,
logos, or descriptions. Reproduction of any or any part of these items is civilly and/or
criminally punishable by law.
AUTOMATIC TRANSMISSION TOOLS
Contact Your Local Distributor PH: 1-800-531-5978 24 Hr. FAX 210-225-2114
or Mobile Tool Truck Dealer www.atec-trans-tool.com
GENERAL MOTORS
T-0163- A
T-0163- C
T-0166
T-0158-HD
T-1001
HEAVY DUTYVACUUM PUMP
375, 400, (3L80), 425, 475 (3L80-HD)
PRESSURE GAUGE* 0-100 Lbs.
LINE A PUMP KIT
CLUTCH DRUMSPRINGCOMPRESSOR
SHIFT LEVER SEALREMOVER-INSTALLER
EXTENSION HOUSINGBUSHING REMOVERAND INSTALLER [GM]
GOVERNOR HOLDINGFIXTURE
T-0163- DPRESSURE GAUGE* 0-300 lbs
T-1006
51
T-0160-AEXTENSION HOUSINGBUSHING REMOVER &INSTALLER
T-0161
T-0220-20BUSHING DRIVER KIT
(20 Piece)
T-1097FRONT PUMP ALIGNMENT BAND
T-1094
T-1092
30104- A
T-1502
T-1072
T-1264
T-1247
REAR PINION BEARING RACEINSTALLER
BEARING RACEINSTALLER
SPEED SENSOR ROTORINSTALLER KIT
GOVERNOR BORE BUSHING
[Use with T-0107, T-0107-D]
SNAP RING REMOVERAND INSTALLER
CONVERTER ENDPLAY CHECKER
AIR TEST PLATE
For 400 (3L80)
T-1055OIL PUMP REMOVER
Also used as a side gear checking tool.Also: 200-4R, 3T40E, 4T60E, 4L60E
Also: 4L60, 4L60-E, 700R4, 325, 325-4L, JF403E-Geo
GM
TR
AN
SM
ISS
ION
TO
OL
S-E
QU
IP
Also used to install crankshaft gear
For 375, 400 only.Also: 350, 700-R4, Powerglide
Reproduction of this material in whole or in part is strictly prohibited without prior
written consent by ATEC Trans-Tool, LP, including all part numbers, drawings, pictures,
logos, or descriptions. Reproduction of any or any part of these items is civilly and/or
criminally punishable by law.
Contact Your Local Distributor PH: 1-800-531-5978 24 Hr. FAX 210-225-2114
or Tool Truck Dealer www.atec-trans-tool.com
GM
TR
AN
SM
ISS
ION
TO
OL
S-E
QU
IP
AUTOMATIC TRANSMISSION TOOLS GENERAL MOTORS
440-T4, F7 (4T60) (4T60-E) (4T65-E)
52
RIGHT & LEFT AXLESEAL INSTALLER
* Installs axle seal withoutremoval of output shaftwhile in or out of car
T-1208
T-1206
T-1217
T-1209
T-1093
AXLE SHAFT SEAL INSTALLER* Installs without removal
of output shaft
[Use with T-1093 driver
handle]
PARK-NEUTRALSWITCH ALIGNER
Also: (3T40E)
SEAL AND BEARINGRACE INSTALLERUse with T-1093
Also:125, 125C,
BOOT SEALER CLAMPINSTALLER
MODULATOR CHECKING TOOL* ‘87 to current
UNIVERSAL DRIVER HANDLEFor threaded
bushing drivers
T-1208- A
T-1205
CONVERTER ENDPLAY CHECKER
Also use as side gear
checking tool.
Also: 200-4, (3T40E)
(4K60E) (3K80)
T-1264
T-1203OUTPUT SHAFTLOADING ANDALIGNIING TOOL
To remove final driveorder T-1202-A
Also: 125,125C,
325, 325-4L
OUTPUT SHAFT C-RING REMOVER ANDINSTALLER
Also 125, 125C
T-1201
HOLDING FIXTUREWITHOUT BASEUse with T-0156-BBAlso 125, 125C
T-1200-F
HOLDING FIXTUREWITH BASE
T-1200
CLUTCH ASSEMBLYAND FINAL DRIVE REMOVER-INSTALLER
Also: 125, 125C
T-1202-A
Reproduction of this material in whole or in part is strictly prohibited without prior
written consent by ATEC Trans-Tool, LP, including all part numbers, drawings, pictures,
logos, or descriptions. Reproduction of any or any part of these items is civilly and/or
criminally punishable by law.
Contact Your Local Distributor PH: 1-800-531-5978 24 Hr. FAX 210-225-2114
or Mobile Tool Truck Dealer www.atec-trans-tool.com
GM
TR
AN
SM
ISS
ION
TO
OL
S-E
QU
IP
AUTOMATIC TRANSMISSION TOOLS
440-T4, F7 (4T60) (4T60-E) (4T65-E)GENERAL MOTORS
53
T-0T-0
T-1274- A
T-2007
T-2008
T-2003
T-2004
T-2004- A
T-2004- B
T-2017
SPROCKET SUPPORTBEARING INSTALLER[Use with T-1215 bushing
driver handle]
AXLE SEAL INSTALLER[Left side]
TURBINE SHAFTTEFLON SEAL INSTALLER-RESIZER
* 440-T4 case side onlyAlso: 125, 125C
OUTPUT SHAFT LOAD-ING TOOL ADAPTER
[Use with T-1203]
INPUT SHAFT TEFLON SEAL INSTALLATION KIT
Also 4T80E
All tools can be ordered
individually- below
INPUT SHAFT SEALINSTALLER
INPUT SHAFT SEALGUIDE
OUTPUT SHAFTLOADING TOOLADAPTERFor (4T60-E) only
[Use with T-1203]
INPUT SHAFT SEALRESIZER
T-2005
T-2004- C
TURBINE SHAFTTEFLON SEAL INSTALLER-RESIZER
* 440-T4 cover side only
Also: 125, 125C
T-1274
TORQUE CONVERTERSEAL INSTALLER
Also: 125, 125C
T-1263
VALVE BODY AIRTEST PLATEFor 440-T4 (4T60)
T-2017-AVALVE BODY AIR TEST PLATEFor (4T60-E)
T-2006THERMO ELEMENTHEIGHT GAUGE
NOPHOTO
AVAILABLE
Reproduction of this material in whole or in part is strictly prohibited without prior
written consent by ATEC Trans-Tool, LP, including all part numbers, drawings, pictures,
logos, or descriptions. Reproduction of any or any part of these items is civilly and/or
criminally punishable by law.
Contact Your Local Distributor PH: 1-800-531-5978 24 Hr. FAX 210-225-2114
or Tool Truck Dealer www.atec-trans-tool.com
GM
TR
AN
SM
ISS
ION
TO
OL
S-E
QU
IP
AUTOMATIC TRANSMISSION TOOLS GENERAL MOTORS
440-T4, F7 (4T60) (4T60-E) (4T65-E)
54
T-0T-0
T-2059
T-2027
T-2028
T-2029
T-2055
T-2061
2nd CLUTCH PISTONSEAL INSTALLER
For (4T60-E) only
CLUTCH ASSEMBLYFINAL DRIVE REMOVER-INSTALLER
For (4T60-E)
Also: (4L80-E)
INPUT CLUTCH PISTON LIP SEAL INSTALLERPROTECTOR
THIRD CLUTCH PISTON LIP SEALINSTALLER PROTECTOR
AXLE REMOVALWEDGE
* Remove the retaining
ring to the output
shaft-carrier assembly
1-2 AND REVERSEBANDS APPLY PINGAUGE
* Necessary tool for
gauging dimensions for
selection of the proper
length of apply pins
INPUT SHAFT ENDPLAY TOOL
* Check correct input shaft
end play tolerance
* No dial indicator required
T-2042DRIVESHAFTBEARING REMOVERAND INSTALLER
For (4T65-E)
* Double ended tool
T-2056
T-2043SECOND CLUTCHPISTON SEAL INSTALLER
For (4T65-E)
* Allows installation in the
clutch housing, protecting
it from damage
T-20621-2 BAND STOP INSTALLER
Reproduction of this material in whole or in part is strictly prohibited without prior
written consent by ATEC Trans-Tool, LP, including all part numbers, drawings, pictures,
logos, or descriptions. Reproduction of any or any part of these items is civilly and/or
criminally punishable by law.
AUTOMATIC TRANSMISSION TOOLS
Contact Your Local Distributor PH: 1-800-531-5978 24 Hr. FAX 210-225-2114
or Mobile Tool Truck Dealer www.atec-trans-tool.com
GENERAL MOTORS
(4T40-E)
GM
TR
AN
SM
ISS
ION
TO
OL
S-E
QU
IP
55
T-0
T-2023
T-2015
T-2021
T-2020
T-2018-F
T-2019
2nd ROLLER CLUTCH INSTALLER
OUTPUT SHAFT SEALREMOVER
PARK NEUTRALSWITCH ALIGNER
2nd CLUTCH SPRINGCOMPRESSOR
REVERSE CLUTCH INNERSEAL INSTALLER
HOLDING FIXTURE
[Use with T-0156-KM]
FWD-REV CLUTCH INNERSEAL INSTALLER
HEAVY DUTY SLIDEHAMMER SETWith 3/8” threaded shaft tip
T-0154-HD
T-1206
T-2011FORWARD CLUTCHINNER SEAL REMOVER
[Use with 3 jaw puller]
OUTPUT SHAFTSLEEVE INSTALLER
T-2016
* Install new sleeve onto the output (stub) shaft whilemaintaining a lateral runout of .001”.
* Used to press the inner sealinto the forward clutch housing.
* Driver used to install the seal
assembly onto the reverse clutch.
* Plastic driver used to install the retainer
onto the reverse clutch housing.
T-2026-A
TORQUE CONVERTERSEAL REMOVER
T-2035TRANSCONNECTOR REMOVER
T-2036
COOLER PIPE SEALREMOVER AND INSTALLER
T-2038
T-2026
T-2024COAST CLUTCHSPRING COMPRESSOR
T-2037
T-2058
PIPE SEALINSTALLER BOLT
This tool is a longer forcing screw that can beused on both seal positions in the 4T40E case which hasbeen modified in the cooler line attachment area.
* Remove the transaxle wiring harnessconnector from the trans case.
This tool is used as a driver to achieve the proper height.
* Access the stub shaft axle sleeve wherestandard pullers cannot be used.
AXLE SEALINSTALLER
* Includes a driver and protector for inner axle seal lipfor installing right and left axle seals into the case.
Allows the retaining ring to be removed or installed.
T-2030INPUT SHAFT TEFLON SEALINSTALLER KIT
MANUALSHAFT PIN INSTALLER
Installs seals on direct/coast
clutch assembly.
OUTPUT SHAFT ASSEMBLYREMOVER AND INSTALLER
Use with T-0154-HD and 4L60-E
Reproduction of this material in whole or in part is strictly prohibited without prior
written consent by ATEC Trans-Tool, LP, including all part numbers, drawings, pictures,
logos, or descriptions. Reproduction of any or any part of these items is civilly and/or
criminally punishable by law.
AUTOMATIC TRANSMISSION TOOLS
(4T80-E)
T-0
COAST CLUTCH SEALPROTECTOR
* Inner seal
Contact Your Local Distributor PH: 1-800-531-5978 24 Hr. FAX 210-225-2114
or Tool Truck Dealer www.atec-trans-tool.com
T-3311
GENERAL MOTORS
T-3310
T-3304
T-3303
T-3302T-3309
T-3308T-3301
T-3300
T-3306
T-3307
INPUT END PLAYLIFTING TOOL
DRIVE SPROCKETSEAL INSTALLER
[Use with T-1093]
FORWARD CLUTCHSEAL PROTECTOR
* Inner seal
REVERSE CLUTCHSEAL PROTECTOR
* Inner seal
FORWARD COASTCLUTCH ASSEMBLYREMOVER ANDINSTALLER
SPROCKET SHAFTSEAL INSTALLER
VALVE BODY GUIDEPINS
( Set of 3)
AXLE SHAFT SEALINSTALLER SET
TRANSAXLE HOLDINGFIXTURE
{Use with T-0156-KM}
TORQUE CONVERTERSEAL INSTALLER
CASE COVER TOSHAFT SEAL REMOVER-INSTALLER
GM
TR
AN
SM
ISS
ION
TO
OL
S-E
QU
IP
56
T-3305
T-2004
T-1206
INPUT SHAFT SEALINSTALLER
(Also: 440-T4)
PARK NEUTRALSWITCH ALIGNER
Reproduction of this material in whole or in part is strictly prohibited without prior
written consent by ATEC Trans-Tool, LP, including all part numbers, drawings, pictures,
logos, or descriptions. Reproduction of any or any part of these items is civilly and/or
criminally punishable by law.
AUTOMATIC TRANSMISSION TOOLS
Contact Your Local Distributor PH: 1-800-531-5978 24 Hr. FAX 210-225-2114
or Mobile Tool Truck Dealer www.atec-trans-tool.com
GENERAL MOTORS
T-0030- A
T-0163- A
T-0163- C
T-0163- D
T-0107
T-0107- D
T-0131
T-0149
T-1001
VACUUM PUMPHEAVY DUTY STYLE
700-R4 (4L60) (4L60-E)
PRESSURE GAUGE0 -100 lbs
PRESSURE GAUGE0 - 300 lbs
“H” GAUGE UNIVERSAL FRONTPUMP CLEARANCEGAUGE
GOVERNOR BOREREPAIR TOOL[Use with T-0107-D]
GOVERNOR BOREBUSHING DRIVER[Use with bushing
#30104-A]
EXTENSION HOUSINGSEAL INSTALLER
INPUT CLUTCH HOUSING SPRINGCOMPRESSOR
SHIFT LEVER SEALREMOVER-INSTALLER
REAR CLUTCH SPRING COMPRESSOR
GM
TR
AN
SM
ISS
ION
TO
OL
S-E
QU
IP
EXTENSION HOUSINGBUSHING REMOVERINSTALLER AND OUTPUT SHAFTSUPPORT FIXTURE* Eases & speeds removal
and replacement ofbushings.
T-0220-700R4BUSHINGDRIVER KIT
T-1264
T-1001-PV
CONVERTER ENDPLAY CHECKER
Also:
200-4R, 3T40E, 4T60E, 3L80
Same as above forpostal vehicles
57
T-0160- A
T-0151
T-0127ACCUMULATORSERVO PISTON REMOVER
Reproduction of this material in whole or in part is strictly prohibited without prior
written consent by ATEC Trans-Tool, LP, including all part numbers, drawings, pictures,
logos, or descriptions. Reproduction of any or any part of these items is civilly and/or
criminally punishable by law.
AUTOMATIC TRANSMISSION TOOLS
T-1097
T-0
FRONT PUMP ALIGNMENT BAND
Also: 250, 350, 350C
Contact Your Local Distributor PH: 1-800-531-5978 24 Hr. FAX 210-225-2114
or Tool Truck Dealer www.atec-trans-tool.com
T-1528
GENERAL MOTORS
T-1517
T-1092
T-1071- A
T-1068 T-1503
T-1502T-1063
T-1055 T-1501
FORWARD CLUTCHINNER LIP SEALINSTALLER PROTECTOR
AIR TEST PLATE(4L60 only)
BEARING RACEINSTALLER
DIRECT CLUTCHACCUMULATORPISTON REMOVERAND INSTALLER
FRONT END PLAYTOOL
* 245MM torque converter
[Use with T-1055]
SPEED SENSORROTOR INSTALLERKIT
STATOR SHAFTTEFLON SEAL INSTALLER RESIZER
(4L60-E only)
PUMP SEAL INSTALLER
OIL PUMP REMOVERAND END PLAY TOOL
When used with T-1068Also: 200, 200C, 200-4-R,
250, 350, 350-C
SPEED SENSORREMOVER
GM
TR
AN
SM
ISS
ION
TO
OL
S-E
QU
IP
700-R4 (4L60) (4L60-E)
T-1517- A
T-1527OVERRUN CLUTCHINNER LIP SEALINSTALLER PROTECTOR
AIR TEST PLATE (4L60-E only)
58
Reproduction of this material in whole or in part is strictly prohibited without prior
written consent by ATEC Trans-Tool, LP, including all part numbers, drawings, pictures,
logos, or descriptions. Reproduction of any or any part of these items is civilly and/or
criminally punishable by law.
AUTOMATIC TRANSMISSION TOOLS
T-0
Contact Your Local Distributor PH: 1-800-531-5978 24 Hr. FAX 210-225-2114
or Mobile Tool Truck Dealer www.atec-trans-tool.com
GENERAL MOTORS
T-1529 T-1574- B
T-1702
T-1703
T-1560
T-1561
T-1571
T-1574-LONG
30104- A
T-3423
TURBINE SHAFTSEAL RESIZER
PRESSURE REGULATORVALVE SNAP RING INSTALLERAlso: 200-4R
FRONT PUMP SPRINGLOADER TOOL
PARK NEUTRALSWITCH ALIGNER
OUTPUT SHAFTSUPPORT FIXTURE
INTERMEDIATE BANDAPPLY PIN GAUGE
* Go / NO GO Gauge
selects correct length
of apply pin
SUN GEAR PULLER
* Removes heat damaged
sun gear when bonded to
upper planetary set.
(416OE only)
* Prevents distortionduring installation.
* One tool will set all 4 rings.* See thru resizer extended
length prevents improperseal installation
* Instructions included
END PLAY ADAPTERFor (4L60E)
EXTENSION HOUSINGSEAL INSTALLER
GOVERNOR BOREBUSHING (GM)
[Use with T-0107,T-0107-D]
GM
TR
AN
SM
ISS
ION
TO
OL
S-E
QU
IP
700-R4 (4L60) (4L60-E)
T-1735SERVO COVER DEPRESSOR* Use with pan on.
Also: 200, 200C, 200-4R
59
T-2009
TRANS OIL COOLERLINE DISCONNECT
* ‘96-later light
duty trucks.
T-1891
T-1574- ATURBINE SHAFT SEALINSTALLER
T-1574(4L60 only)
* Prevents distortionduring installation.
* One tool will set all 4 rings.* See thru resizer prevents
improper seal installation* Instructions included
TURBINE SHAFTTEFLON SEAL INSTALLER-RESIZER T-2030
INPUT SHAFTTEFLON SEALINSTALLER KIT
Installs seals on
direct/coast clutch
assembly.
Reproduction of this material in whole or in part is strictly prohibited without prior
written consent by ATEC Trans-Tool, LP, including all part numbers, drawings, pictures,
logos, or descriptions. Reproduction of any or any part of these items is civilly and/or
criminally punishable by law.
T-0
Contact Your Local Distributor PH: 1-800-531-5978 24 Hr. FAX 210-225-2114
or Tool Truck Dealer www.atec-trans-tool.com
GM
TR
AN
SM
ISS
ION
TO
OL
S-E
QU
IP
AUTOMATIC TRANSMISSION TOOLS
T-0
GENERAL MOTORS
T-0128
T-2053
T-2054
T-0129
T-2002
T-2025
T-2031
T-2059
T-2058
T-2057
OIL PUMP ASSEMBLYREMOVER AND INSTALLER
(4L80-E)
REAR EXTENSIONHOUSING OIL SEALINSTALLER
* Slip yoke design
propshaft.
DIRECT CLUTCHSPIRAL SNAPRING INSTALLER
REAR GEAR HOLDINGFIXTURE ADAPTER
Use with T-0129
REAR GEARHOLDING FIXTURE
Use with T-0128
TRANS OIL COOLERLINE DISCONNECT
‘96-later light duty trucks
Also: 700-R4, (4L60)
(4L60-E)
DIRECT CLUTCHASSEMBLY REMOVERINSTALLER
BAND APPLY PINCHECKING TOOL
OUTPUT SHAFTASSEMBLY REMOVERINSTALLER
Use with T-0154-HD
and 4L60-E
CLUTCH ASSEMBLYFINAL DRIVEREMOVER INSTALLER
Also: (4T60-E)
EXTENSION HOUSINGOIL PUMP SEALINSTALLER[Use with T-2054 for slip
yoke prop application]
TRANSMISSIONHOLDING FIXTUREADAPTER* Allows assembly &
disassembly froma bench base.
T-2901
INTERMEDIATECLUTCH PISTONCOMPRESSOR
T-2902
60
T-1891
T-2053
[Use withT-0156-B]
Reproduction of this material in whole or in part is strictly prohibited without prior
written consent by ATEC Trans-Tool, LP, including all part numbers, drawings, pictures,
logos, or descriptions. Reproduction of any or any part of these items is civilly and/or
criminally punishable by law.
T-0
Contact Your Local Distributor PH: 1-800-531-5978 24 Hr. FAX 210-225-2114
or Mobile Tool Truck Dealer www.atec-trans-tool.com
GM
TR
AN
SM
ISS
ION
TO
OL
S-E
QU
IP
AUTOMATIC TRANSMISSIONTOOLS
(4L80-E)
T-2925SECOND CLUTCHINNER SEAL PROTECTORINSTALLER
T-2995
GENERAL MOTORS
T-2974T-2924
T-2917
T-2905
T-2962
T-2930
T-2904
T-2903 T-2927
T-2928
REAR BUSHING CASEBORING TOOL
T-2995-SL
Replacement Sleeves
TURBINE SHAFTTEFLON SEAL INSTALLER-RESIZERKIT (6 pieces)
DIRECT CLUTCHOUTER SEAL PROTECTORINSTALLER
[Use with T-2930, T-2925]
AIR TEST PLATE
INTERMEDIATECLUTCH PACK ALIGNMENT TOOL
FORWARD & DIRECTCLUTCH INNER SEALPROTECTOR INSTALLER[Use with T-2924, T-2925]
PUMP ALIGNMENTBAND
CENTER SUPPORTTEFLON SEALINSTALLER ANDRESIZER KIT
3 piece kit
OIL PUMP ASSEMBLYTEFLON SEAL INSTALLER ANDRESIZER KIT3 Piece Kit - installs each
seal into its groove.
OVER RUN CLUTCHPISTON LIP SEALINSTALLER PROTECTOR* Protects inner seal
when assembling.
FORWARD CLUTCHPISTON LIP SEALINSTALLER PROTECTOR KIT* Protects inner and outer
seals while servicing.
T-2926FOURTH CLUTCHPISTON & HOUSINGLIP SEAL INSTALLERPROTECTOR KIT* Protects the inner & outer
seals when servicing the4th clutch piston.
T-3422CENTER SUPPORTTHREAD REAMER
61
* Helps in installing each seal into its groove & sizes or compresses each seal into the grooves.
* Includes reamer and gauge pin.
Reproduction of this material in whole or in part is strictly prohibited without prior
written consent by ATEC Trans-Tool, LP, including all part numbers, drawings, pictures,
logos, or descriptions. Reproduction of any or any part of these items is civilly and/or
criminally punishable by law.
AUTOMATIC TRANSMISSION TOOLS
T-0
Contact Your Local Distributor PH: 1-800-531-5978 24 Hr. FAX 210-225-2114
or Tool Truck Dealer www.atec-trans-tool.com
GENERAL MOTORS
GM
TR
AN
SM
ISS
ION
TO
OL
S-E
QU
IP
62
T-0
T-0033 T-0153- HD
T-0160- A
T-1001
T-0033- A
T-0085
T-0131
T-0134
T-0150
T-1097
FRONT PUMP ANDSPEEDOMETER GEARREMOVER
EXTENSION HOUSINGBUSHING REMOVERINSTALLER ANDOUTPUT SHAFTSUPPORT FIXTURE* Eases & speeds process.
SHIFT LEVER SEALREMOVER-INSTALLER
HEAVY DUTY FRONT PUMP PULLER
HEAVY DUTY FRONTPUMP REMOVER
FRONT PUMP SEALER TOOL
EXTENSION HOUSINGSEAL INSTALLER
FRONT PUMP SEALINSTALLER
* Small shaft
REAR CLUTCH SPRING COMPRESSOR
FRONT PUMP ALIGNMENT BAND
Also: 250, 350, 350C, 375,
400, 700-R4
T-3531SERVOPISTON SEALINSTALLER SET
T-1092BEARING RACE INSTALLER
T-1208AXLE SHAFT SEALINSTALLER[Use with T-1093]
T-2208BEARING PULLERBRIDGE
T-2210SIDE BEARINGPULLER PILOT
T-2211
T-2212
SERVO PISTONCLUTCH SPRINGCOMPRESSOR
BEARINGCUP REMOVER
JF403-E (Nissan Transmission Used By GM - Geo)
POWERGLIDE
T-3530CLUTCH PISTON SEALINSTALLER SET
SATURN TOOLS
[Front axle - use with universal two jaw puller]
Reproduction of this material in whole or in part is strictly prohibited without prior written consent by ATEC Trans-Tool, LP, including all part numbers, drawings, pictures, logos,
or descriptions. Reproduction of any or any part of these items is civilly and/or criminally punishable by law.
Contact Your Local Distributor PH: 1-800-531-5978 24 Hr. FAX 210-225-2114
or Mobile Tool Truck Dealer www.atec-trans-tool.com
AUTOMATICTRANSMISSION
SPECIFIC TOOLS
FOR: FORD
Transmission Typea. C-3, A4LD
(4R44E) (4R55E) (5R55E) (5R55N) ....64-67
b. C-4, C-5................................................68
c. C-6........................................................69-70
d. AOD, AOD-E, AOD-EW (4R70W) ......71-75 e.
ATX 82-84
f. AXOD, AXOD-E (AX4S) (AX4N) ........79-82
g. E4OD....................................................83-84
h. 4EAT (G4A-EL), F4EAT (F4A-EL)
(G-4EAT) ..............................................85-86
i. (CD4E)..................................................87-88
j. 4F20-E (RE4F04A) ..............................89
FO
RD
TR
AN
SM
ISS
ION
TO
OL
S-E
QU
IP
63
FORD
OLD TO NEW
TRANSMISSION
CONVERTIONS
A4LD-Elec................(4R44E)
..................................(4R55E)
A4LD 5 Spd..............(5R55E)
AOD-EW ..................(4R70W)
4 Spd FWD ..............(CD4E)
AXOD-E....................(AX4S)
4 Spd FWD ..............(AX4N)
4EAT Probe..............(G4A-EL)
F4EAT Escort ..........(F4A-EL)
GF4EAT....................(GF4A-EL)
4F20-E Villager ........(RE4F04A)
FEATURED PRODUCTST-0033
SeePage 71
SeePage 87
SeePage 84
SeePage 79T-2805
T-1600-K
T-0004
T-2400
HEAVY DUTYFRONT PUMPREMOVER
LIP SEAL INSTALLERPROTECTOR KIT
Specifications and descriptions on productsin this catalog may change without notice.
Copyright ©2007 ATEC Trans-Tool
All intellectual property and
copyrights reserved.
SeePage 76
CLUTCHDRUMSPRINGCOMPRESSOR
T-0158-HDSeePage 81
LIP SEAL INSTALLERPROTECTOR KIT
A. B. C.
CLUTCHREMOVER
INSTALLER
VALVE BODYLOCK PIN
REMOVER
Reproduction of this material in whole or in part is strictly
prohibited without prior written consent by ATEC Trans-Tool, LP,
including all part numbers, drawings, pictures, logos, or
descriptions. Reproduction of any or any part of these items is
civilly and/or criminally punishable by law.
AUTOMATIC TRANSMISSION TOOLS
C3, A4LD (4R44E) (4R55E) (5R55E) (5R55N)
Contact Your Local Distributor PH: 1-800-531-5978 24 Hr. FAX 210-225-2114
or Tool Truck Dealer www.atec-trans-tool.com
T-0432
FORD
T-0417
T-0409
T-0414
PNP REMOVER ANDREPLACERFor A4LD. Also: AOD
AIR TEST PLATE
(C3 Only)
OVERRUN CLUTCHGUIDE
For: A4LD, 4R44E, 4R55E,
5R55E
FRONT SERVO COVERCOMPRESSOR
FO
RD
TR
AN
SM
ISS
ION
TO
OL
S-E
QU
IP
T-0429OIL PUMP ALIGNINGGAUGE KIT
(5 PIECES)Gauges Available Individually
T-0429- A
T-0429- B
T-0429- C
T-0429- D
T-0429- EHEAVY DUTY PUMP TO GEARALIGNMENT TOOLUp to 90
T-0168- B
T-0168- A
T-0159
T-0130
T-0030- A
PUMP TO GEARALIGNMENT TOOL
Up to 90
BELL HOUSING TOPUMP ALIGNMENTTOOL
EXTENSION HOUSINGBUSHING REMOVERAND INSTALLER(C3 Only)
BOOT TYPE EXTENSION HOUSINGSEAL INSTALLER
“H” GAUGE UNIVERSAL FRONTPUMP CLEARANCEGAUGE
T-0168- K
T-0168- C
T-0168- CU
BELL HOUSING TOPUMP & PUMP TOGEAR ALIGNMENTTOOL KIT
FRONT PUMP ALIGNMENT TOOL90 up
64
T-0137EXTENSION HOUSINGSEAL REPLACER
For: A4LD, 4R44E, 4R55E
A
B
C
D
E
T-0431CLUTCH INSTALLERGUIDE
Also for A4LD, 5R55E and 4R55E
Reproduction of this material in whole or in part is strictly prohibited without prior
written consent by ATEC Trans-Tool, LP, including all part numbers, drawings, pictures,
logos, or descriptions. Reproduction of any or any part of these items is civilly and/or
criminally punishable by law.
AUTOMATIC TRANSMISSION TOOLS
T-0
Contact Your Local Distributor PH: 1-800-531-5978 24 Hr. FAX 210-225-2114
or Mobile Tool Truck Dealer www.atec-trans-tool.com
FORD
T-0468
T-0469
T-0480
T-0484
T-0481
FRONT PUMP SEALINSTALLERFor: A4LD (5R55E)
PUMP SEAL STAKING TOOLFor: A4LD (5R55E)
A4LD HOLDING FIXTURE ADAPTERFor: A4LD
GAUGE BARFor: A4LD
VALVE BODY GUIDE.235 PINFor: (4R44E) (4R55E)
(5R55E)
FO
RD
TR
AN
SM
ISS
ION
TO
OL
S-E
QU
IP
T-0443
T-0440
T-0439
T-0438
T-0437
HOUSING BUSHINGINSTALLER For: A4LD (4R44E)
(4R55E) (5R55E)(5R55N) (5R55S)(5R55W)
OUTER SEAL PROTECTORFor: A4LD (4R44E)
(4R55E) (5R55E)
PISTON INNERSEAL PROTECTORFor: (4R44E) (4R55E)
(5R55E) (5R55N)
(5R55S) (5R55W)
MANUAL LEVER OILSEAL INSTALLERFor: A4LD (4R44E) (4R55E)
(5R55E)
Also: AOD, AOD-E, E40D
INNER SEAL PROTECTOR
For A4LD
C3, A4LD (4R44E) (4R55E) (5R55E) (5R55N)
T-0485VALVE BODY GUIDE.248 PINFor: (4R44E) (4R55E)
(5R55E)
65
T-0450END PLAYCHECKING TOOL
For all Ford transmissions
except ATX T-0486COAST CLUTCH SEALSIZING TOOL
For: (4R44E) (4R55E)
(5R55E)
T-0487DIRECT CLUTCH SEALSIZING TOOL
For: (4R44E) (4R55E)
(5R55E)
Reproduction of this material in whole or in part is strictly prohibited without prior
written consent by ATEC Trans-Tool, LP, including all part numbers, drawings, pictures,
logos, or descriptions. Reproduction of any or any part of these items is civilly and/or
criminally punishable by law.
AUTOMATIC TRANSMISSION TOOLS
Contact Your Local Distributor PH: 1-800-531-5978 24 Hr. FAX 210-225-2114
or Tool Truck Dealer www.atec-trans-tool.com
FORD
FO
RD
TR
AN
SM
ISS
ION
TO
OL
S-E
QU
IP
C3, A4LD (4R44E) (4R55E) (5R55E) (5R55N)
TRANSMISSIONTEST PLATE
For: (4R44E) (4R55E)
T-0495- SL
T-0490
T-0488
T-0493
GOVERNOR BORE BUSHING REPLACEMENT
[For T-0495]
FRONT PUMP SEAL SIZER
For:(4R44E) (4R55E) (5R55E)
TSS GAUGE
GOVERNOR BORE CASESLEEVING TOOL
[Use with T-0495-SL]
PUMP SEAL STAKINGTOOL ADAPTER
66
T-0492
T-0489CONVERTER GUIDE PIN
For: (4R44E) (4R55E) (5R55E)
T-0494
T-0495
T-0497
T-0500PUMP BEARINGINSTALLER
For: (5R55E)
[Use with T-1215 bushingdriver handle]
T-0501CENTER SUPPORTBEARING INSTALLERFor: (5R55E)
[Use with T-1215 bushingdriver handle]
T-0502FORWARD CLUTCHBEARING INSTALLERFor: (5R55E)
[Use with T-1215 bushingdriver handle]
T-0
T-0
SLEEVE, ONE WAY CLUTCH
For: (5R55E)
[Use with T-0504]
T-0504PUSHER, ONE WAY CLUTCH
For: (5R55E)
[Use with T-0503]
T-0506TRANSMISSION BELLHOUSING GUIDE PIN
T-0507SELECTING GAUGE
T-0508HOUSING BUSHING REMOVER
For: C3, A4LD
T-0503
For (4R44E) (4R55E) ( 5R55E
For:
(4R44E)
(4R55E) (5R55E)
For: (4R44E) (4R55E) (5R55E)
For: A4LD, (4R44E) (4R55E) (5R55E)
SERVO COVERCOMPRESSOR
For: (4R44E) (4R55E)
(5R55E)
SERVO COVER COMPRESSORFor: (5R55E)
Reproduction of this material in whole or in part is strictly prohibited without prior
written consent by ATEC Trans-Tool, LP, including all part numbers, drawings, pictures,
logos, or descriptions. Reproduction of any or any part of these items is civilly and/or
criminally punishable by law.
AUTOMATIC TRANSMISSION TOOLS
Contact Your Local Distributor PH: 1-800-531-5978 24 Hr. FAX 210-225-2114
or Mobile Tool Truck Dealer www.atec-trans-tool.com
FORD
FO
RD
TR
AN
SM
ISS
ION
TO
OL
S-E
QU
IP
C3, A4LD (4R44E) (4R55E) (5R55E) (5R55N)
67
T-0
T-5015
T-2601
T-0519
T-2324
T-0520
T-0521
T-0522
T-0518
OVERDRIVE SPRAG INSTALLER
For: A4LD
PUMP SEAL STAKING TOOLFor: A4LD
BAND ADJUSTERWRENCH KIT* Set at 10 foot pounds
For: A4LD (4R44E)
(5R55E) Also: C6
SERVO COVER COMPRESSOR
For: (5RR5N)
FLEX PLATE ALIGNERFor: (5R55N)
OUTPUT FLANGEINSTALLER
For: (5R55N)
AIR TEST PLATE
For: (5R55N)
OUTPUT FLANGEREMOVER
For: (5R55N)
CUSHION SPRINGCOMPRESSOR
For: (5RR5N)
T-0517
GAUGE BARFor: (5R55N)
T-0516
OIL PUMP TO TRANSCASE ALIGNMENT PINS
For: (5R55N) (5R55S) (5R55W)
T-0515
T-2617VALVE BODY TESTPLATE For: A4LD
T-0512
T-0513
T-0514
T-0516
CONVERTER SEALINSTALLER
For: (5R55E)
TRANSMISSIONPUMP PULLER
For: (5R55N)
PUMP ALIGNMENTPINSFor: (5R55N) (5R55S)
(5R55W)
T-0509
T-0510
T-0511
REVERSE DRUM 1WAY CLUTCH PUSHER
For: (4R55E) (5R55E)
REVERSE DRUM 1WAY CLUTCH PUSHER
For:(4R55E) (5R55E)
OUTPUT SHAFTBEARING INSTALLER
For: (5R55E)
Reproduction of this material in whole or in part is strictly prohibited without prior
written consent by ATEC Trans-Tool, LP, including all part numbers, drawings, pictures,
logos, or descriptions. Reproduction of any or any part of these items is civilly and/or
criminally punishable by law.
AUTOMATIC TRANSMISSION TOOLS
Contact Your Local Distributor PH: 1-800-531-5978 24 Hr. FAX 210-225-2114
or Tool Truck Dealer www.atec-trans-tool.com
FORD
FO
RD
TR
AN
SM
ISS
ION
TO
OL
S-E
QU
IP
68
T-0156- AHOLDING FIXTUREWITH BASE* Bench mounts
* 360 degree swing
T-1890
T-0154- HD
T-0131
T-0130
T-0033- A
T-0033
COOLER LINE QUICKDISCONNECT TOOL
* Removes push lockconnectors found at boththe radiator &transmission connectionson ‘83 thru current Fordvehicles & the ‘82Lincoln Continentaloverdrive trans.
HEAVY DUTY SLIDEHAMMER SET
EXTENSION HOUSINGSEAL INSTALLERFor: C4 Only
BOOT TYPEEXTENSION HOUSINGSEAL INSTALLER
REVERSE CLUTCHLIP SEALINSTALLER ANDPROTECTOR
For: C5 Only ‘81-current
HEAVY DUTYFRONT PUMP REMOVER
HEAVY DUTY FRONT PUMP REMOVER
CLUTCH DRUMSPRING COMPRESSOR
HEAVY DUTYVACUUM PUMP
T-0132FRONT PUMP SEALINSTALLERFor: C4 Only
T-0156- AFWITHOUT BASE
T-1028
T-0158- HD
EXTENSION HOUSINGBUSHING REMOVERINSTALLER AND OUTPUT SHAFTSUPPORT FIXTURE
T-0163- A
T-0163- CPRESSURE GAUGE
0 - 100 POUNDS
T-0163- DPRESSURE GAUGE
0 - 300 POUNDS
C4, C5
T-0160- A
T-0450END PLAYCHECK TOOL
All Ford Trans
except ATX
Reproduction of this material in whole or in part is strictly prohibited without prior
written consent by ATEC Trans-Tool, LP, including all part numbers, drawings, pictures,
logos, or descriptions. Reproduction of any or any part of these items is civilly and/or
criminally punishable by law.
AUTOMATIC TRANSMISSION TOOLS
Contact Your Local Distributor PH: 1-800-531-5978 24 Hr. FAX 210-225-2114
or Mobile Tool Truck Dealer www.atec-trans-tool.com
FORD
FO
RD
TR
AN
SM
ISS
ION
TO
OL
S-E
QU
IP
69
C6T-0033 T-0156- A
T-0156- AF
T-0157T-0033- A
T-0130
T-0133
T-0136
T-0163- C
T-0163- A
T-0161- A
TRANSMISSIONHOLDING FIXTUREWITH BASE
HOLDING FIXTUREWITHOUT BASE
UNIVERSAL QUICKLOCK CLUTCHSPRING COMPRESSOR
T-0157-KCompression ring kit
for T-0157
HEAVY DUTY FRONT PUMP REMOVER
HEAVY DUTY FRONT PUMP REMOVER
BOOT TYPE EXTENSION HOUSING SEAL INSTALLER
REAR SEAL INSTALLER
EXTENSION HOUSINGBUSHING REMOVERAND INSTALLER
[Ford]
Also: 727, FMX, E4OD
VACUUM PUMPHEAVY DUTY
FRONT PUMP OILSEAL INSTALLER
PRESSURE GAUGE0 - 100 POUNDS
T-0152REAR CLUTCHSPRING COMPRESSOR
T-0158- HDCLUTCH DRUMSPRING COMPRESSOR
T-0PRESSURE GAUGE
0 - 300 POUNDS
T-0163- DReproduction of this material in whole or in part is strictly prohibited without prior
written consent by ATEC Trans-Tool, LP, including all part numbers, drawings, pictures,
logos, or descriptions. Reproduction of any or any part of these items is civilly and/or
criminally punishable by law.
AUTOMATIC TRANSMISSION TOOLS
Contact Your Local Distributor PH: 1-800-531-5978 24 Hr. FAX 210-225-2114
or Tool Truck Dealer www.atec-trans-tool.com
FORD
FO
RD
TR
AN
SM
ISS
ION
TO
OL
S-E
QU
IP
70
C6
T-0444
T-0442
T-0428
T-0427
SEAL PROTECTOR
Also: E40D
CONVERTER CLUTCHHOLDING TOOLAlso: AOD, AOD-E, AXOD,
ATX, 4R70W
EXTENSION HOUSINGSEAL INSTALLER
AIR TEST PLATE
VRV SETTING BLOCKAlso: E40D
T-0450END PLAY CHECKING TOOLAll Ford Transmissions except ATX
T-0479
T-0496BUSHING INSTALLERREMOVER
RPK-1052REPLACEMENT FOR T-1052
T-1052UNIVERSAL TORQUECONVERTER LEAK TESTER
T-2321MANUAL LEVER SEALINSTALLER
T-1890COOLER LINE QUICK
DISCONNECT TOOL
* Removes push lock connectorsfound at both the radiator & trans-mission connections on ‘83 thrucurrent Ford vehicles & the ‘82Lincoln Continental overdrivetrans. Order T-1889 for replace-ment part.
Also:CD4E
Also: E4ODD,
4R70W
For more informationabout ATEC products,log onto our website:
www.atec-trans-tool.com
Reproduction of this material in whole or in part is strictly prohibited without prior written consent by ATEC Trans-Tool, LP, including all part numbers, drawings, pictures, logos,
or descriptions. Reproduction of any or any part of these items is civilly and/or criminally punishable by law.
AUTOMATIC TRANSMISSION TOOLS
Contact Your Local Distributor PH: 1-800-531-5978 24 Hr. FAX 210-225-2114
or Mobile Tool Truck Dealer www.atec-trans-tool.com
FORD
FO
RD
TR
AN
SM
ISS
ION
TO
OL
S-E
QU
IP
71
AOD, AOD-E, AOD-EW (4R70W)T-0033 T-0156- A
T-0157
T-0158- HD
T-0033- A
T-0131
T-0132
T-0136
T-0154- B
T-0428
T-0220-AOD
T-0160- A
TRANSMISSIONHOLDING FIXTUREWITH BASE
UNIVERSL QUICK LOCKCLUTCH SPRING COMPRESSOR
CLUTCH DRUMSPRING COMPRESSOR
HEAVY DUTY FRONTPUMP REMOVER
HEAVY DUTY FRONTPUMP REMOVER
EXTENSION HOUSINGSEAL INSTALLER
FRONT PUMP SEAL INSTALLER
FRONT PUMP OILSEAL REPLACER
Also: C6, E4OD, 4R70W
EXTENSION HOUSINGBUSHING REMOVERINSTALLER ANDOUTPUT SHAFTSUPPORT FIXTURE
* Eases & speeds process
BUSHINGDRIVER KIT
10mm SLIDE HAMMERADAPTERS
EXTENSION HOUSINGSEAL REPLACER
For: (4R70W)
Also: C6, E4OD
T-0154- HDHEAVY DUTY SLIDEHAMMER SET
T-0156- AFABOVE HOLDINGFIXTURE WITHOUTBASE
T-0157- KCOMPRESSION RING KIT
Does not work on 4R70W
Reproduction of this material in whole or in part is strictly prohibited without prior
written consent by ATEC Trans-Tool, LP, including all part numbers, drawings, pictures,
logos, or descriptions. Reproduction of any or any part of these items is civilly and/or
criminally punishable by law.
AUTOMATIC TRANSMISSION TOOLS
Contact Your Local Distributor PH: 1-800-531-5978 24 Hr. FAX 210-225-2114
or Tool Truck Dealer www.atec-trans-tool.com
FORD
FO
RD
TR
AN
SM
ISS
ION
TO
OL
S-E
QU
IP
72
AOD, AOD-E, AOD-EW (4R70W)
T-1600- K
T-0441
T-0438
T-0436
T-0450
T-0447
T-0432
T-0431
T-0446
LIP SEAL INSTALLERPROTECTOR KIT
ONE WAY CLUTCHTOOL
MANUAL LEVER OILSEAL INSTALLERFor AOD, AOD-EAlso: AL4D, (4R4E) (4R55E)
(5R55E), E4OD
UNIVERSAL OIL SEALREMOVER
OIL PUMP BUSHINGREMOVER
For AOD, AOD-E, (4R70W)
END PLAYCHECKING TOOL
PNP REMOVER ANDINSTALLER
CLUTCH INSTALLERGUIDE
OIL PUMP BUSHINGINSTALLER
Prevents cutting and rolling during installation.
A complete set to insure proper installation of liip seals.
Available Individually (see next page)
T-0442CONVERTER CLUTCHHOLDING TOOL
Also: C6, AXOD, ATX
For more information
about ATEC products,
log onto our website:
www.atec-trans-tool.com
Also for A4LD, 5R55E and 4R55E
Reproduction of this material in whole or in part is strictly prohibited without prior
written consent by ATEC Trans-Tool, LP, including all part numbers, drawings, pictures,
logos, or descriptions. Reproduction of any or any part of these items is civilly and/or
criminally punishable by law.
AUTOMATIC TRANSMISSION TOOLS
Contact Your Local Distributor PH: 1-800-531-5978 24 Hr. FAX 210-225-2114
or Mobile Tool Truck Dealer www.atec-trans-tool.com
FORD
FO
RD
TR
AN
SM
ISS
ION
TO
OL
S-E
QU
IP
73
AOD, AOD-E, AOD-EW (4R70W)
T-0
T-1601 T-1618
T-1602
T-1603
T-1605
T-1606
THROTTLE VALVECABLE GAUGE
For: AOD, AOD-E
THROTTLE VALVEGAUGE BLOCK
REAR CASE BUSHINGR & R
For: AOD-E
TORQUE CONVERTERCHECKING TOOL
OIL PRESSUREGAUGE SET
For: AOD
CLUTCH PISTON LIPSEAL PROTECTOR
For AOD, AOD-E, 4R70W
AIR TEST PLATE
For: AOD
T-1613
T-1617
T-0
AIR TEST PLATE
For: AOD-E
T-1617- AREVERSE CLUTCHINNER LIP SEALINSTALLER PROTECTOR
REVERSE CLUTCHOUTER LIP SEALINSTALLER PROTECTOR
FORWARD CLUTCHINNER LIP SEALINSTALLER PROTECTOR
DIRECT CLUTCHINNER LIP SEALINSTALLER PROTECTOR
SERVO REMOVERINSTALLEROVERDRIVE &LOW-REVERSE SERVOFor: AODE
Also for AX4N Coast
T-1627
T-1626
T-1625
T-1624
T-1619
DIRECT DRIVE SOLID SEALINGRING INSTALLERKIT
Reproduction of this material in whole or in part is strictly prohibited without prior
written consent by ATEC Trans-Tool, LP, including all part numbers, drawings, pictures,
logos, or descriptions. Reproduction of any or any part of these items is civilly and/or
criminally punishable by law.
AUTOMATIC TRANSMISSION TOOLS
Contact Your Local Distributor PH: 1-800-531-5978 24 Hr. FAX 210-225-2114
or Tool Truck Dealer www.atec-trans-tool.com
FORD
FO
RD
TR
AN
SM
ISS
ION
TO
OL
S-E
QU
IP
74
AOD, AOD-E, AOD-EW (4R70W)
INTERMEDIATECLUTCH LIP SEALINSTALLERPROTECTOR
DIRECT CLUTCHOUTER LIP SEALINSTALLER PROTECTOR
T-1629
T-1628
T-1695- SLBUSHING REPLACEMENT[Use with T-1695] AOD only
T-1690-SLEAODE Replacement for
T-1695
T-1665CASE REARBUSHING INSTALLER
T-2329
T-1695
SUN GEARBUSHING INSTALLER
For: AOD only
GOVERNOR BORECASE SLEEVINGTOOL KIT
For: AOD, AOD-E
[Use with T-1695-SL]
T-1643END PLAY ANDCLEARANCEGAUGE BAR
T-1633SERVO PISTON SELECTOR
T-1630FORWARD CLUTCHOUTER LIP SEALINSTALLERPROTECTOR
T-1632SERVO PISTON REMOVER
T-1634SERVO PISTONREMOVER INSTALLER
For: AOD-E
T-1641VALVE BODYGUIDE PINS
Reproduction of this material in whole or in part is strictly prohibited without prior
written consent by ATEC Trans-Tool, LP, including all part numbers, drawings, pictures,
logos, or descriptions. Reproduction of any or any part of these items is civilly and/or
criminally punishable by law.
AUTOMATIC TRANSMISSION TOOLS
Contact Your Local Distributor PH: 1-800-531-5978 24 Hr. FAX 210-225-2114
or Mobile Tool Truck Dealer www.atec-trans-tool.com
FORD
AOD, AOD-E, AOD-EW (4R70W)
FO
RD
TR
AN
SM
ISS
ION
TO
OL
S-E
QU
IP
75
T-2802- A
T-2416
GEAR POSITIONSENSOR ADJUSTER(TRS ALIGNMENT TOOL)
Also: AXOD, AXOD-E, AX4N,
E4OD, AOD, AODE
OIL COOLER LINEDISCONNECT TOOL
Also: AXOD, ATX
T-1890COOLER ANDFUEL LINEDISCONNECT TOOL
* Removes push lockconnectors found atboth the radiator &transmissionconnections on ‘83thru current Fords& ‘82 Lincolnoverdrive.
T-2408
T-2327
OUTPUT SEAL INSTALLER
For AOD, AOD-E
Also: E4OD
MLPS ALIGNMENTTOOLFor 4R70W, 4R44E,
4R55E, A4LD
Also: E4OD
T-2142AODE INPUTSHAFT SIZINGRING TOOL
For more informationabout ATEC products,log onto our website:
www.atec-trans-tool.com
T-2806PUMP PULLER ADAPTERS
Works on (E4OD)
(4R70W) (AOD) (AODE)
Reproduction of this material in whole or in part is strictly prohibited without prior
written consent by ATEC Trans-Tool, LP, including all part numbers, drawings, pictures,
logos, or descriptions. Reproduction of any or any part of these items is civilly and/or
criminally punishable by law.
AUTOMATIC TRANSMISSION TOOLS
ATX
Contact Your Local Distributor PH: 1-800-531-5978 24 Hr. FAX 210-225-2114
or Tool Truck Dealer www.atec-trans-tool.com
FORD
FO
RD
TR
AN
SM
ISS
ION
TO
OL
S-E
QU
IP
76
T-0
T-0452
T-0157
T-0158
T-0158- HD
T-0442
T-0460
T-0458
T-0453
CONVERTER REACTOR SUPPORTTOOL KIT
UNIVERSAL QUICKLOCK SPRING COMPRESSOR
AUTOMATIC TRANSMISSIONCLUTCH SPRINGCOMPRESOR KIT
* For foreign & domestic
* Removes clutch pistons
* Adapters included for
AOD, AXOD, ATX.
* Can be used on clutch
drums with center shafts.
* Instructions included
CLUTCH DRUMSPRING COMPRESSOR* Most economical
universal unit.
* Longer legs for deep
drums.
* Mounts directly on work
bench or vise
BEARING INSTALLER
END PLAY CHECK TOOL
CONVERTER CLUTCHHOLDING TOOL
Also: C6, AOD, AOD-E,
(4R70W), AXOD
BEARING REMOVER
For: ATX (FLC)
Also: AXOD, 4EAT type F, G
T-0157- KCOMPRESSIONRING KIT[ For: T-0157]
T-0461DIFFERENTIALINSTALLER
Also: 4EAT
T-0154- HDHEAVY DUTY SLIDEHAMMER SET
For more informationabout ATEC products,log onto our website:
www.atec-trans-tool.com
Reproduction of this material in whole or in part is strictly prohibited without prior
written consent by ATEC Trans-Tool, LP, including all part numbers, drawings, pictures,
logos, or descriptions. Reproduction of any or any part of these items is civilly and/or
criminally punishable by law.
AUTOMATIC TRANSMISSION TOOLS
Contact Your Local Distributor PH: 1-800-531-5978 24 Hr. FAX 210-225-2114
or Mobile Tool Truck Dealer www.atec-trans-tool.com
FORD
ATX
FO
RD
TR
AN
SM
ISS
ION
TO
OL
S-E
QU
IP
77
T-1863
T-1641
T-0470
T-1817
T-0467
T-0464
FRONT PUMPSEAL INSTALLER
VALVE BODYGUIDE PINS
TV LINKAGE ADJUSTMENT TOOL
AIR TEST PLATEWITH BOLT KIT
CONVERTOR SEALINSTALLER
Also: 4EAT TYPE F
BEARING CONEINSTALLER
For: ATX 1.25” I.D. 8.0”
‘66 thru ‘79Also: 4EAT
T-1643END PLAY ANDCLEARANCEGAUGE BAR
T-0132FRONT PUMP SEALINSTALLER
T-0161- AEXTENSION HOUSINGBUSHING REMOVERAND INSTALLER
Also: C6, 727, E4OD
T-0450END PLAY CHECKING TOOL
T-0099UNIVERSAL SEALREMOVER
T-0131EXTENSION HOUSINGSEAL INSTALLER
T-0133REAR SEAL INSTALLER
Reproduction of this material in whole or in part is strictly prohibited without prior
written consent by ATEC Trans-Tool, LP, including all part numbers, drawings, pictures,
logos, or descriptions. Reproduction of any or any part of these items is civilly and/or
criminally punishable by law.
AUTOMATIC TRANSMISSION TOOLS
ATX
Contact Your Local Distributor PH: 1-800-531-5978 24 Hr. FAX 210-225-2114
or Tool Truck Dealer www.atec-trans-tool.com
FORD
FO
RD
TR
AN
SM
ISS
ION
TO
OL
S-E
QU
IP
78
T-0
T-2323
T-1890
T-2322
T-2416
T-2411
CONVERTER HUBSEAL INSTALLER
COOLER AND FUELLINE DISCONNECTTOOL
* Removes push lock
connectors found at both
the radiator &
transmission connections
on ‘83 thru current Fords
& ‘82 Lincoln overdrive.
FRONT HUB REMOVERTHROTTLE SHAFT
SEAL INSTALLER
Also: CD4E
OIL COOLER LINE DISCONNECT TOOL
Also: AOD, AXOD
T-2341DIFFERENTIAL SEAL INSTALLER
Also: 4EAT type F, G
T-1864DIFFERENTIALROTATOR ANDAXLE REMOVER
T-2410FRONT HUB INSTALLER
For more informationabout ATEC products,log onto our website:
www.atec-trans-tool.comReproduction of this material in whole or in part is strictly prohibited without prior
written consent by ATEC Trans-Tool, LP, including all part numbers, drawings, pictures,
logos, or descriptions. Reproduction of any or any part of these items is civilly and/or
criminally punishable by law.
AUTOMATIC TRANSMISSION TOOLS
Contact Your Local Distributor PH: 1-800-531-5978 24 Hr. FAX 210-225-2114
or Mobile Tool Truck Dealer www.atec-trans-tool.com
FORD
AXOD, AXOD-E (AX4S) (AX4N)
FO
RD
TR
AN
SM
ISS
ION
TO
OL
S-E
QU
IP
79
T-0004VALVE BODY LOCKPIN REMOVER
T-0004- RTREPLACEMENT TIPSFOR T-0004
T-0156- A
T-0436
TRANSMISSION HOLDING FIXTUREWITH BASE
UNIVERSAL OIL SEAL REMOVER
T-0156- AFHOLDING FIXTUREWITHOUT BASE
BEARING REMOVER
For AXOD
Also: ATX, 4EAT (type F,G)
CONVERTER CLUTCHHOLDING TOOL
Also: C6, AOD, AOD-E
(4R70W), ATX
END PLAY CHECKING TOOL
T-0442
T-0450
T-0460
T-1650
T-1651
T-1652
T-1653
CONVERTER SEAL REMOVER
For (AX4N)
LUBE TUBE REMOVER
For (AX4N)
LOW ANDINTERMEDIATECLUTCH PISTON LIPSEAL PROTECTOR
For (AX4N)
AIR TEST PLATE
For (AX4N)
T-1654GASKET ONLY
SERVO REMOVERINSTALLEROVERDRIVE &LOW-REVERSE SERVOFor AX4N Coast
Also for: AODE
T-1619
Reproduction of this material in whole or in part is strictly prohibited without prior
written consent by ATEC Trans-Tool, LP, including all part numbers, drawings, pictures,
logos, or descriptions. Reproduction of any or any part of these items is civilly and/or
criminally punishable by law.
AUTOMATIC TRANSMISSION TOOLS
AXOD, AXOD-E (AX4S) (AX4N)
Contact Your Local Distributor PH: 1-800-531-5978 24 Hr. FAX 210-225-2114
or Tool Truck Dealer www.atec-trans-tool.com
FORD
FO
RD
TR
AN
SM
ISS
ION
TO
OL
S-E
QU
IP
80
T-0
T-1661
T-1662
T-1656
T-1657
T-1658
T-1659
T-2325
T-1664
SHIM SELECTIONGAUGE
For (AX4N)
REVERSE PISTON LIPSEAL PROTECTOR
For (AX4N)
LUBE TUBE SEALREPLACER
For (AX4N)
FRONT CLUTCH LOADING TOOLSCREW
For (AX4N)
OUTPUT SHAFT SEALREPLACER PILOT
For (AX4N)
DRIVER SPROCKETWHEEL INSTALLER
For (AX4N) (AX4S)
BEARING REMOVER
For (AX4N)
OUTPUT SEAL INSTALLER
Also: CD4E
T-1655REVERSE CLUTCHPLANET ASSEMBLYCOLLET
For (AX4N)
T-1660INTERMEDIATECLUTCH BALANCEPISTON LIP SEALPROTECTOR
For (AX4N)
T-2397
T-2398
T-2399
PUMP BODY GUIDE PIN
For (AXOD)
PUMP BEARING-SEALREMOVER
For (AX4N) (AX4S)
PUMP BEARING-SEALINSTALLER
For (AX4N) (AX4S)
Reproduction of this material in whole or in part is strictly prohibited without prior
written consent by ATEC Trans-Tool, LP, including all part numbers, drawings, pictures,
logos, or descriptions. Reproduction of any or any part of these items is civilly and/or
criminally punishable by law.
AUTOMATIC TRANSMISSION TOOLS
Contact Your Local Distributor PH: 1-800-531-5978 24 Hr. FAX 210-225-2114
or Mobile Tool Truck Dealer www.atec-trans-tool.com
FORD
FO
RD
TR
AN
SM
ISS
ION
TO
OL
S-E
QU
IP
AXOD, AXOD-E (AX4S) (AX4N)
81
T-2410FRONT HUB INSTALLER
T-2400LIP SEAL INSTALLERPROTECTOR KIT
Available Individually
T-2400- ADirect Clutch
Piston Protector
T-2400- BSeal Protector - Reverse
T-2400- CForward/Intermediate
Clutch Seal Protector
T-2401OVERDRIVE SERVOROD TOOL
T-2403LOW INTERMEDIATESERVO ROD TOOL
T-2407VALVE AND PUMPSHAFT BODY GUIDE PINS
* ESSENTIAL: Prevents
misalignment of oil pump
and valve body.
T-2409- FHOLDING FIXTUREWITHOUT BASE
T-0156-BBHOLDING FIXTUREBASE FOR T-2409- F
T-2404FRONT PLANETARYBUSHING INSTALLER
T-2406
T-2405STATOR AND DRIVENSPROCKET BEARINGINSTALLER
DIRECTINTERMEDIATECLUTCH BUSHING INSTALLER
T-2411FRONT HUB REMOVER
A
B
C
T-2402FRONT CLUTCHLOADING TOOL
Reproduction of this material in whole or in part is strictly prohibited without prior
written consent by ATEC Trans-Tool, LP, including all part numbers, drawings, pictures,
logos, or descriptions. Reproduction of any or any part of these items is civilly and/or
criminally punishable by law.
AUTOMATIC TRANSMISSION TOOLS
AXOD, AXOD-E (AX4S) (AX4N)
Contact Your Local Distributor PH: 1-800-531-5978 24 Hr. FAX 210-225-2114
or Tool Truck Dealer www.atec-trans-tool.com
FORD
Fo
rd T
ran
sm
issio
nTo
ols
-Eq
uip
82
T-2433
T-2463
T-2421
T-2495
T-2494
REVERSE CLUTCHFEED OIL PIPE SEAL INSTALLER
For: AXOD
CONVERTER OILSEAL INSTALLER
OIL PUMP NEEDLEBEARING AND SEAL TOOL
* For bearing replacement
VALVE BODY COVERPUMP DRIVE SHAFTBORE REPAIR TOOL
OUTPUT SHAFT SEAL INSTALLER
T-2495- SLBUSHING REPLACEMENT
For: T-2495
T-2420END PLAY TOOL
T-2470REVERSE DRUM &PLANETARY GEARSREMOVER-INSTALLER
T-2417AIR TEST PLATEFor: AXOD
T-2417- AAIR TEST PLATEFor: AXOD-E
T-0
T-2415
T-2416
T-2418
BIMETAL HEIGHTGAUGE TOOL
OIL COOLER LINE DISCONNECT TOOL
Use with T-1889
Replacement Kit
Also: AOD, ATX
CONVERTERGUIDE SLEEVE
[Use with T-0450]
Reproduction of this material in whole or in part is strictly prohibited without prior
written consent by ATEC Trans-Tool, LP, including all part numbers, drawings, pictures,
logos, or descriptions. Reproduction of any or any part of these items is civilly and/or
criminally punishable by law.
AUTOMATIC TRANSMISSION TOOLS
Contact Your Local Distributor PH: 1-800-531-5978 24 Hr. FAX 210-225-2114
or Mobile Tool Truck Dealer www.atec-trans-tool.com
FORD
E40D
FO
RD
TR
AN
SM
ISS
ION
TO
OL
S-E
QU
IP
83
T-0428EXTENSION HOUSINGSEAL INSTALLER
Also: C6, (4R70W)
T-0161- A
T-0136
T-0133T-0479
T-0034
T-0033 T-0438
T-0444
EXTENSION HOUSINGBUSHING REMOVERAND INSTALLER
FRONT PUMP OILSEAL INSTALLER
Also: C6, AOD, AOD-E,
(4R70W)
EXTENSION HOUSINGSEAL INSTALLER
VRV SETTING BLOCK
Also: C6
UNIVERSAL SEALPULLER* Insert tip of the tool
behind seal & leverage
works for you.
* Eliminates hammering
& digging.
UNIVERSAL PUMPREMOVER
* Quickly removes
conventional type pumps
without damage.
OIL SEAL INSTALLER
Also: AOD, AOD-E, A4LD,
(5R55E) (4R44E) (4R55E)
SEAL PROTECTOR
Also: C6
T-0450END PLAY CHECKING TOOL
T-2408OUTPUT SHAFT BUSHING INSTALLER
For more informationabout ATEC products,log onto our website:
www.atec-trans-tool.com
Reproduction of this material in whole or in part is strictly prohibited without prior
written consent by ATEC Trans-Tool, LP, including all part numbers, drawings, pictures,
logos, or descriptions. Reproduction of any or any part of these items is civilly and/or
criminally punishable by law.
AUTOMATIC TRANSMISSION TOOLS
E4OD
Contact Your Local Distributor PH: 1-800-531-5978 24 Hr. FAX 210-225-2114
or Tool Truck Dealer www.atec-trans-tool.com
FORD
FO
RD
TR
AN
SM
ISS
ION
TO
OL
S-E
QU
IP
84
T-0
T-2805
T-2806
T-2800- F
T-2801
T-2802- A
T-2803
T-2862
T-2817
T-2808
CLUTCH REMOVERINSTALLER
* Works on new & older clutch drums.
PUMP PULLER ADAPTERS
Works on (E4OD)
(4R70W) (AOD) (AODE)
HOLDING FIXTUREWITHOUT BASE[Use with base T-0156-BB]
OIL FILLER TUBEINSTALLER
GEAR POSITIONSENSOR ADJUSTER
Also: AOD, AOD-E, AXOD,
AXOD-E
FRONT PUMP ALIGNING PIN
PRESSURE REGULATOR SNAPRING INSTALLER
AIR TEST PLATE
CLUTCH SPRING FIXTURE
* All metal
ALIGNMENT BAND
T-0156- BBHOLDING FIXTUREBASE
T-2804T-2409REAR CASE BUSHING
REPLACER SET
Also: C6
T-2412OUTPUT SHAFT BUSHING INSTALLER
T-2716-ARETURN SPRING COMPRESSORLow & Reverse BrakePiston ‘89- current
Reproduction of this material in whole or in part is strictly prohibited without prior
written consent by ATEC Trans-Tool, LP, including all part numbers, drawings, pictures,
logos, or descriptions. Reproduction of any or any part of these items is civilly and/or
criminally punishable by law.
AUTOMATIC TRANSMISSION TOOLS
Contact Your Local Distributor PH: 1-800-531-5978 24 Hr. FAX 210-225-2114
or Mobile Tool Truck Dealer www.atec-trans-tool.com
FORD
4EAT (G4A-EL), F4EAT (F4A-EL), (G-4EAT)
FO
RD
TR
AN
SM
ISS
ION
TO
OL
S-E
QU
IP
85
T-0460
T-0461
T-0464
T-0467
T-0471
BEARING REMOVER
For 4EAT-Types F, G
Also: AXOD, ATX
DIFFERENTIALINSTALLER
For 4EAT-Types F, G
Also: ATX
BEARING CONEINSTALLERFor 4EAT-Types F, G
1.25 I.D. 8.0”
* 1965 Thru 1979Also: ATX (FLC)
CONVERTER SEALINSTALLER
For 4EAT-Type F
Also: ATX
OIL SENSOR REMOVER INSTALLERFor 4EAT Type G
T-0450END PLAY CHECKING TOOL
END PLAY ANDCLEARANCE GAUGE BAR
For 4EATAlso: AOD, AOD-E
T-0T-2708CONVERTER SEALINSTALLER
For 4EAT Type F, G
T-2709PRELOAD TORQUEADAPTER
For 4EAT Type F, G
T-2710DIFFERENTIAL BEARING CUPINSTALLER
For 4EAT Type F, G
T-1643
T-1641VALVE BODY GUIDEPINSFor 4EAT Type F, G
Also: AOD, AOD-E
Reproduction of this material in whole or in part is strictly prohibited without prior
written consent by ATEC Trans-Tool, LP, including all part numbers, drawings, pictures,
logos, or descriptions. Reproduction of any or any part of these items is civilly and/or
criminally punishable by law.
AUTOMATIC TRANSMISSION TOOLS
Contact Your Local Distributor PH: 1-800-531-5978 24 Hr. FAX 210-225-2114
or Tool Truck Dealer www.atec-trans-tool.com
FORD
FO
RD
TR
AN
SM
ISS
ION
TO
OL
S-E
QU
IP
86
4EAT (G4A-EL), F4EAT (F4A-EL), (G-4EAT)
T-2724-A
T-0
T-2722SHIM SELECTION SET
For 4EAT Type F, G
T-2723SHIM SELECTIONGAUGEFor 4EAT Type F
T-3425COOLER LINE BANJOFITTING
For: 4EAT
Also: (4F20-E), Mazda, Nissan,
Infinite, BMW, Mercedes
T-2724-B
T-2724-C
T-2718LLOOWW RREEVVEERRSSEECCLLUUTTCCHH SSPPRRIINNGGCCOOMMPPRREESSSSOORR
For: F-4EAT (G4A-EL)
T-2724SEAL PROTECTOR SET(3 Piece)For 4EAT Type F
AVAILABLE INDIVIDUALLY
T-2717AIR TEST PLACE
For: (G4AEL)
T-2713LIP SEAL INSTALLERPROTECTORFor 4EAT Type F, G* Installs reverse piston &
low-reverse clutch piston
lip seals
T-2714COASTING PISTON LIPSEAL INSTALLER PROTECTOR
For 4EAT Type F, G
T-2716- ARETURN SPRINGCOMPRESSOR
* Low & reverse brake
piston
T-2712TORQUE CONVERTERLEAK CHECKADAPTERFor 4EAT Type G
Use with T-1052
T-2712-ATORQUE CONVERTERLEAK CHECK ADAPTERFor 4EAT Type F
Use with T-1052
T-2715TURBINE SHAFTHOLDER
For 4EAT Type G
A
B
C
Reproduction of this material in whole or in part is strictly prohibited without prior
written consent by ATEC Trans-Tool, LP, including all part numbers, drawings, pictures,
logos, or descriptions. Reproduction of any or any part of these items is civilly and/or
criminally punishable by law.
AUTOMATIC TRANSMISSION TOOLS
Contact Your Local Distributor PH: 1-800-531-5978 24 Hr. FAX 210-225-2114
or Mobile Tool Truck Dealer www.atec-trans-tool.com
FORD
FO
RD
TR
AN
SM
ISS
ION
TO
OL
S-E
QU
IP
87
T-2304TRANSMISSIONMOUNTING BRACKET
T-2311
T-2309
T-2301 T-2307
T-2306
SERVO COVER REMOVER ANDINSTALLER
CLUTCH PISTON LIPSEAL PROTECTOR KIT
SPRAG INSTALLER
SHIFTER SHAFTALIGNMENT TOOL
OIL PUMPREMOVAL BOLTS
SERVO PISTON RODSELECTION TOOL
NEEDLE BEARINGREMOVER INSTALLER
CONVERTER SEAL INSTALLER
NEEDLE BEARINGINSTALLER
T-2305
T-2303
T-2302 T-2308
T-2310
CD4ET-0450END PLAY CHECKING TOOL
VALVE BODY GUIDE PINS
Reproduction of this material in whole or in part is strictly prohibited without prior
written consent by ATEC Trans-Tool, LP, including all part numbers, drawings, pictures,
logos, or descriptions. Reproduction of any or any part of these items is civilly and/or
criminally punishable by law.
AUTOMATIC TRANSMISSION TOOLS
Contact Your Local Distributor PH: 1-800-531-5978 24 Hr. FAX 210-225-2114
or Tool Truck Dealer www.atec-trans-tool.com
FORD
FO
RD
TR
AN
SM
ISS
ION
TO
OL
S-E
QU
IP
88
CD4E
T-0
T-2312 T-2319
T-2320T-2313
T-2314
T-2315
T-2317
T-2318
T-2322
T-2321
END PLAY CHECKINGTOOL SLEEVE
DIRECT CLUTCH PISTON LIP SEAL PROTECTOR
PUMP ALIGNMENTPINS
GAUGE BAR
PRELOAD TOOLADAPTER ALIGNER SET
AIR TEST PLATE
GAUGE BAR SPACER SET
MANUAL LEVER SEALINSTALLER
Also: C6
THROTTLE SHAFTSEAL INSTALLER
Also: ATX
T-2325OUTPUT SEAL
INSTALLER
Also: AXOD
T-2316GASKET FOR T-2315
T-2725
T-2726
MLPS ALIGNMENT
TOOL
CONVERTOR SEAL
REMOVER
LUBE TUBE INSTALLER SET
Reproduction of this material in whole or in part is strictly prohibited without prior
written consent by ATEC Trans-Tool, LP, including all part numbers, drawings, pictures,
logos, or descriptions. Reproduction of any or any part of these items is civilly and/or
criminally punishable by law.
AUTOMATIC TRANSMISSION TOOLS
Contact Your Local Distributor PH: 1-800-531-5978 24 Hr. FAX 210-225-2114
or Mobile Tool Truck Dealer www.atec-trans-tool.com
FORD
FO
RD
TR
AN
SM
ISS
ION
TO
OL
S-E
QU
IP
89
T-0476SHIFT LEVER SEALINSTALLER
For 4F20E
T-3425
T-0478
T-0472T-0477
COOLER LINE BANJO FITTING
DIFFERENTIAL ROTATOR
For 4F20E
CLUTCH SPRING COMPRESSOR BAR
For 4F20E
GEAR PISTON SENSOR ADJUSTER
For 4F20E
DIFFERENTIAL SEAL INSTALLER
For 4F20E
SHIM SELECTIONBOLT SET
For 4F20E
BEARING RETAINERINSTALLER
For 4F20E
END PLAY CHECKING TOOL
For 4F20E
T-0475
T-0474 T-0483
4F20E (RE4FO4A)
T-0473
T-0450END PLAY CHECKING TOOL
Reproduction of this material in whole or in part is strictly prohibited without prior
written consent by ATEC Trans-Tool, LP, including all part numbers, drawings, pictures,
logos, or descriptions. Reproduction of any or any part of these items is civilly and/or
criminally punishable by law.
AUTOMATICTRANSMISSION
SPECIFIC TOOLS
FOR: CHRYSLERTransmission Type
a. 404 (30TH), 413, 470 (31TH) ........98
b. 500 (40RH) (42RH) (42RE) (44RE),
518 (46RH) (46RE),
618 (47RH) (47RE) ........................99
c. 604, 604-E (40TE) (41TE) (41AE),
607..................................................100-101
d. 606 (42LE).....................................102-103
e. 727 (36RH) (37RH), ......................104
f. 904 (30RH), 998 (31RH),
999 (32RH). ....................................105-106
FOR: MISCELLANEOUSTransmission Type
Toyota, Mitsubishi/Hyundai,Mercedes, Renault, Volvo..........107
CH
RY
SL
ER
TR
AN
S.
TO
OL
S-E
QU
IP
CHRYSLER
OLD TO NEW
TRANSMISSION
CONVERTIONS
404............................(30TH)
413, 470....................(31TH)
500................(40RH) (42RH)
518............................(46RH)
618............................(47RH)
604............................(41TE)
604 LD ......................(40TE)
604 AWD ..................(41AE)
606............................(42LE)
727...............(36RH) (37RH)
904............................(30RH)
998............................(31RH)
999............................(32RH)
FEATURED PRODUCTST-0033
SeePage 105
SeePage 100
SeePage99
SeePage105
T-1307
T-0030-AT-1420-K“H” GAUGEUNIVERSALFRONT PUMPCLEARANCEGAUGE See
Page100
T-1435-ATRANSFERSHAFTBEARINGSNAP-RINGREMOVERINSTALLER
Specifications and descriptions on products in this catalog may change without notice.
Copyright ©2007 ATEC Trans-Tool
All intellectual property and
copyrights reserved.
UNIVERSALPUMPREMOVER
OVERDRIVE REVERSEREACTION PLATE SPRINGCOMPRESSOR KIT
HEAVY DUTYDIRECTCLUTCHSPRINGCOMPRESSOR
SeePage 99
SPLINEALIGNMENTTOOL
T-1302
Contact Your Local Distributor PH: 1-800-531-5978 24 Hr. FAX 210-225-2114
or Tool Truck Dealer www.atec-trans-tool.com
90
Reproduction of this material in whole or in part is strictly
prohibited without prior written consent by ATEC Trans-Tool,
LP, including all part numbers, drawings, pictures, logos, or
descriptions. Reproduction of any or any part of these items
is civilly and/or criminally punishable by law.
AUTOMATIC TRANSMISSION TOOLS
404 (30TH), 413, 470 (31TH)
T-1427AIR TEST PLATE
T-3208
CHRYSLER
T-1462
T-1432
T-1418
T-1409
T-1460
T-1454
T-1406
T-0033 T-1452
T-1453
UNIVERSAL DRIVEHANDLEFor (31TH)
[Use with T-1452]
ADAPTER FOR T-1407AND T-1460
* For use on 1979 1/2
and up
BEARING PULLER SETFor (31TH)
* Removes rear carrier,
output gear, and transfer
gear bearing cones.Also: 604, (41TE), (41AE)
(42LE)
TRANSFER SHAFT &DIFFERENTIAL GEARBEARING CUP (RACE)AND EXTENSIONREMOVER
OVERRUN CLUTCHASSEMBLY INSTALLER
OUTPUT AND TRANSFER SHAFTGEAR REMOVER
* Fits both early & late
models
OUTPUT AND TRANSFER GEARHOLDER REMOVER &INSTALLER
* Up to 1979 1/2
DIFFERENTIAL BEARING CONEREMOVER
UNIVERSAL PUMPREMOVER
* Quickly removes
conventional type pumps
without damage.
BEARING AND SEAL INSTALLER (31TH)
* Use with T-3208 to install
differential bearing. Used
on rear wheel “blue” hub
seal. Also: (41AE)
BEARING CUP ANDCONE REMOVERINSTALLER KIT
* New bronze collet for
strength.
Also: 604, 604-E, 607
CH
RY
SL
ER
TR
AN
S.
TO
OL
S-E
QU
IPT-1448DIFFERENTIAL SEALAND CUP INSTALLER
BEARING CUPS IN: BEARING CONES IN:
* Transfer shaft bearing cup retainer * Transfer shafts
* Differential bearing cup retainer * Differential assembly
* Output bearing cups * Rear carrier
* Governor support retainer * Output shaft gear
* Extension housing * Transfer shaft gear
* Rear annulus gear
PHOTONOT AVAILABLE
Contact Your Local Distributor PH: 1-800-531-5978 24 Hr. FAX 210-225-2114
or Mobile Tool Truck Dealer www.atec-trans-tool.com
91
For (31TH) * Installs differential, extension housing oil seals &
differential bearing cups. (Also: 604, (40TE)(41TE)(41AE)
Reproduction of this material in whole or in part is strictly prohibited without prior
written consent by ATEC Trans-Tool, LP, including all part numbers, drawings, pictures,
logos, or descriptions. Reproduction of any or any part of these items is civilly and/or
criminally punishable by law.
AUTOMATIC TRANSMISSION TOOLS
T-0
CHRYSLER
T-1301
T-1441
T-3229
T-1302
T-1307
T-1317
T-1318
T-1319
T-3210
T-3208
T-1450
FRONT PUMP SEALINSTALLERFor (42RE) (44RE) (46RE)
(47RE)
[Use with T-3208]Also: (36RH)
RETAINING CLIPINSTALLER- REMOVERFor (42RE) (44RE) (46RE)
(47RE)
* Used to compress front
clutch assembly.
Also: 727 (36RH), (32RH)
FRONT PUMP OILSEAL INSTALLERFor (42RE) (44RE) Also: 604 (41TE), (42LE),
(30RH)
O.D. PISTON SHIMAND INTER. SHAFTSPACER GAUGE
For: 500, 518 only
HEAVY DUTY DIRECTCLUTCH SPRING COMPRESSORPart of T-1318
For: 500, 518 only
SPLINE ALIGNMENTTOOLPart of T-1318
For: 500, 518 only
AIR TEST PLATE
Also: 727, 904
SPRING COMPRESSORALIGNMENT SHAFT* Disassemble &
reassemble the
overdrive unit
For: 500, (40RH) (42RH)
(46RH) (46RE)
REAR EXTENSIONHOUSING SEAL INSTALLERFor (42RE) (44RE) (46RE)
(47RE)
[Use with T-3208]
Also: 904, (32RH), ( 36RH),
UNIVERSAL DRIVE HANDLE[Use with T-1450 and T-1320]
TRANS BANDADAPTERFor (42RE) (44RE) (46RE)
(46RH) (47RE)
* Use with torque wrench to
adjust transmission bandsAlso: 727 (36RH),
904 (30RH) (32RH)
THRUST PLATE GAUGE BAR* Use with a dial caliper or depth gauge to
select the proper thrust plate.
CH
RY
SL
ER
TR
AN
S.
TO
OL
S-E
QU
IP
500 (40RH) (42RH) (42RE) (44RE),518 (46RH) (46RE), 618 (47RH) (47RE)
T-1320
T-1321
T-1322
T-1323
COOLING LINE DISCONNECT TOOLFrom RWD vehicles “97up Both 3/8” & 1/2” lines
OVERDRIVE PISTONSEAL INSTALLERFor 4 Sp. RWD ‘96-up
OUTPUT SHAFT BUSHING REMOVERFor (46RE)
Contact Your Local Distributor PH: 1-800-531-5978 24 Hr. FAX 210-225-2114
or Tool Truck Dealer www.atec-trans-tool.com
92
Reproduction of this material in whole or in part is strictly prohibited without prior
written consent by ATEC Trans-Tool, LP, including all part numbers, drawings, pictures,
logos, or descriptions. Reproduction of any or any part of these items is civilly and/or
criminally punishable by law.
AUTOMATIC TRANSMISSION TOOLS
604, 604-E (40TE) (41TE) (41AE), 607
T-0
T-1437
CHRYSLER
T-1436
T-1431
T-1430
T-1420- K
T-1435-A
T-1435
T-1432
T-1433
2-4 PISTON SPRINGCOMPRESSOR* Center bolt to be used
with T-1431 and T-1443
Also: (42LE)
TRANSFER AND OUTPUT GEAR BEARING CONEINSTALLER
OVERDRIVE ANDREVERSE REACTIONPLATE SPRING COMPRESSOR[Use with center bolt from
T-1437 and T-1443]
Also: (42LE)
OVERDRIVE REVERSE REACTION PLATESPRING COMPRESSOR KIT
INPUT CLUTCHOUTER LIP SEALINSTALLER PROTECTOR
TRANSFER SHAFTBEARING SNAP-RINGREMOVER-INSTALLER
TRANS SHAFT BEARING SNAP RINGREMOVER-INSTALLER
For: 604
Also: (Toyota 140, 150, 540)
BEARING CONEREMOVER SET
* Can be used with T-1447
on 41TE
FRONT BEARING CUPAND TRANSFERSHAFT REMOVER ANDINSTALLER
CH
RY
SL
ER
TR
AN
S.
TO
OL
S-E
QU
IP
T-1438UNDER DRIVE SPRINGRETAINER SEALINSTALLER
T-1439TRANSFER SHAFT BEARINGCONE INSTALLER
T-1442AIR TEST PLATE
T-1443OVERDRIVE ANDREVERSE SPRINGCOMPRESSORFor 604, (41TE) (41AE)
* Removes retainiing ring
[Use with T-1431 and
center bolt from T-1437]
Also: (42LE)
T-1445TRANSFER AND OUTPUT GEAR BEARING RACE CUPREMOVER
Contact Your Local Distributor PH: 1-800-531-5978 24 Hr. FAX 210-225-2114
or Mobile Tool Truck Dealer www.atec-trans-tool.com
93
Reproduction of this material in whole or in part is strictly prohibited without prior
written consent by ATEC Trans-Tool, LP, including all part numbers, drawings, pictures,
logos, or descriptions. Reproduction of any or any part of these items is civilly and/or
criminally punishable by law.
AUTOMATIC TRANSMISSION TOOLS
T-0
CHRYSLER
T-1446
T-1449
T-1448
T-1447
OUTPUT AND TRANSFER GEARHOLDER
DIFFERENTIALBEARING REMOVER* Used on front hub &
bearing assemblies in FWD vehicles to ‘94 [Usewith T-1432 to removedifferential bearing from(41TE) ] ‘94 - up
SEAL AND CUP INSTALLERFor 604, (40TE) (41TE) (41AE)* Installs differential, extension housing oil seals &
differential bearing cups. Also: (31TH)
FRONT PUMP OILSEAL REMOVER
For: (41TE)* Removes front camshaft
seal in 3.0 Liter OHC V-6 enginesAlso (42LE), (30RH), (32RH)
CH
RY
SL
ER
TR
AN
S.
TO
OL
S-E
QU
IP
604, 604-E (40TE) (41TE) (41AE), 607
T-1451BEARING CUP REMOVERFor 604, (40TE) (41TE)
(41AE)
* Removes transfer shaft &
differential bearing cups.
T-1452BEARING AND SEALINSTALLERFor (41AE)
* Use on rear wheel “blue”
hub seal.
[Use with T-3208 to install
differential bearing.]
T-1453BEARING CUP ANDCONE REMOVERINSTALLER KIT
* New bronze collet
T-1455DIFFERENTIAL ASSEMBLY BEARINGREMOVERFor: 604, 604-E* Heavy duty all bronze jaws* No chisels or cut off
wheels needed.* Won’t damage bearing
mount area.
T-1456CLUTCH SPRINGCOMPRESSORADAPTORFor: 604, 604-E
[Use with T-0158]
T-3201INNER DIFFERENTIALADJUSTMENTWRENCH
Also: 606
T-1447
T-3202SPLINED SOCKETWRENCH
Also; 606 (42LE)
T-3208UNIVERSAL DRIVEHANDLE[Use with T-1452]
T-3229FRONT PUMP OILSEAL INSTALLER For: 604 Torqueflite &
Loadflite
* Use on LH vehicles
Also: (42LE)
T-3232OUTPUT & TRANSFERSHAFT GEAR HOLDERDuring removal &
installation process
T-3234OIL PUMP HOUSINGSEAL INSTALLERFor: (41TE) all wheel drive
mini vans
PHOTONOT AVAILABLE
Contact Your Local Distributor PH: 1-800-531-5978 24 Hr. FAX 210-225-2114
or Tool Truck Dealer www.atec-trans-tool.com
94
Reproduction of this material in whole or in part is strictly prohibited without prior
written consent by ATEC Trans-Tool, LP, including all part numbers, drawings, pictures,
logos, or descriptions. Reproduction of any or any part of these items is civilly and/or
criminally punishable by law.
AUTOMATIC TRANSMISSION TOOLS
T-0
CHRYSLER
CH
RY
SL
ER
TR
AN
S.
TO
OL
S-E
QU
IP
606 (42LE)T-1431OVERDRIVE ANDREVERSE REACTIONPLATE SPRING COMPRESSOR (42LE)
[Use with T-1437 center bolt
and T-1443]Also: 604 (41TE) (41AE)
T-1432BEARING CONEPULLER SETFor (42LE)
* Removes rear carrier,
output gear, and transfer
gear bearing cones.
[Use with T-3208]Also: (31TH), 604 (41TE)
(41AE)
T-14372-4 PISTON SPRINGCOMPRESSOR (42LE)
* Center bolt to be used
with T-1431 and T-1443Also: 604, (41TE) (41AE)
T-1443OVERDRIVE AND REVERSESPRING COMPRESSOR (42LE)
* Removes retaining ring
[Use with T-1431 and center bolt
from T-1437. Also: 604, (41TE) (41AE)
T-1449FRONT PUMP OILSEAL REMOVER (42LE)* Removes front camshaft
seal in 3.0 Liter OHC V-6enginesAlso: (41TE), (30RH) (32RH)
(36RH)
T-3200DIFFERENTIAL TURNING FORKWRENCH
T-3201INNER DIFFERENTIALADJUSTMENTWRENCHAlso: 604
T-3202SPLINED SOCKETWRENCH
Also: 604
T-3203DIFFERENTIAL BEARING PRELOADWRENCH
T-3204MAIN & TRANSFERSHAFT RETAININGNUT WRENCH* For removing and
installing
[Use with T-3202]
T-3205TRANSFER SHAFTFRONT BEARING CUPINSTALLER
T-3206TRANSFER SHAFTFRONT BEARING CUPREMOVER
[Use with T-3208]
T-3207TRANSFER SHAFTREAR BEARING CUPREMOVER
T-3208UNIVERSAL DRIVEHANDLE[Use with T-3206 and
T-1419]
T-3209TRANSFER SHAFTSEAL REMOVER KITFor (42LE)
T-3211COLLET SETFor (42LE)
* Removes the output shaft
bearing cone on the rear
carrier ‘93 to current.
[Use with T-1432]
Contact Your Local Distributor PH: 1-800-531-5978 24 Hr. FAX 210-225-2114
or Mobile Tool Truck Dealer www.atec-trans-tool.com
95
Reproduction of this material in whole or in part is strictly prohibited without prior
written consent by ATEC Trans-Tool, LP, including all part numbers, drawings, pictures,
logos, or descriptions. Reproduction of any or any part of these items is civilly and/or
criminally punishable by law.
AUTOMATIC TRANSMISSION TOOLS CHRYSLER
606 (42LE)
CH
RY
SL
ER
TR
AN
S.
TO
OL
S-E
QU
IP
T-3220OUTPUT SHAFTFRONT BEARING CUPREMOVERFor (42LE) * ‘93 - current
T-3221OUTPUT SHAFT REARBEARING CUP REMOVER For (42LE)
* ‘93 to current
T-1437
T-3218
T-3213MAIN & TRANSFERSHAFT SPROCKETREMOVER INSTALLERFor (42LE)
* Removes as a single unit
‘93 to current.
T-3214DIFFERENTIAL INNER& OUTER ADJUSTERSEAL INSTALLERFor (42LE)
* Install the inner and outer
adjuster seals ‘93-current
T-3215TRANSFER SHAFTREAR & BAFFLEBEARING CUP INSTALLER For (42LE)[Use with an arbor press]
T-3216TRANSFER SHAFTRETAINING NUTSTAKING TOOLFor (42LE)* Use during assembly
[Use with an arbor press]
T-3218TRANSFER SHAFT OILSEAL PROTECTORFor (42LE)
* ‘93 to current
T-3219TRANSFER SHAFTHOLDING FIXTUREFor (42LE)* Use during installation of
transfer shaft seal, reartransfer shaft bearing cupand bearing cone.
* ‘93 to current
T-3222OUTPUT SHAFTRETAINING NUTSTAKING TOOLFor (42LE) * ‘93 to current* Use after installation on
LH vehicles.
[Use with arbor press]
T-3223LONG STUB SHAFTREMOVERFor (42LE) * ‘93 to current
[Use with T-0154- HD]
T-3224STUB SHAFT OILSEAL PROTECTORFor (42LE)
‘93 to current
T-3225TRANSFER SHAFTSEAL INSTALLERFor (42LE) * ‘93 to current
T-3226OUTPUT SHAFT REARBEARING CONE SUPPORT PLATEFor (42LE) * ‘93 to current
* Use during installation
* Also use to install ball
bearing on stub shaft.
T-3229FRONT PUMP OIL SEALINSTALLER For (42LE)
T-3230CARRIER BEARING INSTALLERFor (42LE)* Also use to install the differential side
carrier bearing in cars with 8 1/4”rear axles. [Use T-3208]
T-3235
TRANSFER DRIVENBEARING GEAR INSTALLERFor Colt & Summit
T-3235
Contact Your Local Distributor PH: 1-800-531-5978 24 Hr. FAX 210-225-2114
or Tool Truck Dealer www.atec-trans-tool.com
96
* Use on LH vehicles. Also: 604 torqueflite & Loadflite
Reproduction of this material in whole or in part is strictly prohibited without prior
written consent by ATEC Trans-Tool, LP, including all part numbers, drawings, pictures,
logos, or descriptions. Reproduction of any or any part of these items is civilly and/or
criminally punishable by law.
AUTOMATIC TRANSMISSION TOOLS CHRYSLER
CH
RY
SL
ER
TR
AN
S.
TO
OL
S-E
QU
IP
727 (36RH) (37RH)
T-0099
T-0
UNIVERSAL SEALREMOVER
T-0220-20
T-0166
T-0085
T-0033-A
T-0161- A
T-0033
T-0030-A
T-0133
T-0158- HD
COMPLETE BUSHINGDRIVER KIT
LINE A PUMP KIT
FRONT PUMP SEALER TOOL
HEAVY DUTY FRONTPUMP REMOVER
EXTENSION HOUSINGBUSHING REMOVERAND INSTALLER
UNIVERSAL PUMPREMOVER* Removes conventional
pumps without damage.
UNIVERSAL “H”GAUGE FRONT PUMPCLEARANCE GAUGE
EXTENSION HOUSINGSEAL INSTALLER
CLUTCH DRUMSPRING COMPRESSOR* Long legs for lock ups* Mounts directly on work
bench or viseAlso: 904 series
T-1031- ASHIFT SELECTORSHAFT SEAL REMOVER INSTALLER*No draining of trans fluid.
T-1317AIR TEST PLATEAlso: 500, 904
T-1319TRANS BANDADAPTER 727 (36RH)
* Use with torque wrench to
adjust transmission bands
T-1320FRONT PUMP SEALINSTALLER For (36RH)
[Use with T-3208]
T-1441RETAINING CLIPINSTALLER REMOVERFor 727 (36RH)
* Used to compress front
clutch assembly.
T-1449FRONT PUMP OILSEAL REMOVER (36RH)* Front camshaft seal in
3.0 liter OHC V-6 engines.
T-1450REAR EXTENSIONHOUSING SEAL INSTALLER For (36RH)
[Use with T-3208]
T-3208UNIVERSAL DRIVEHANDLE[Use with T-1450, T-1320]
For more informationabout ATEC products,log onto our website:
www.atec-trans-tool.com
Contact Your Local Distributor PH: 1-800-531-5978 24 Hr. FAX 210-225-2114
or Mobile Tool Truck Dealer www.atec-trans-tool.com
97
AUTOMATIC TRANSMISSION TOOLS CHRYSLER
CH
RY
SL
ER
TR
AN
S.
TO
OL
S-E
QU
IP
904 (30RH), 998 (31RH), 999 (32RH)
T-0166LINE A PUMP KIT
T-0163- C
T-0163- A
T-0160- A
T-0158- HD
PRESSURE GAUGE
0 - 100 pounds
VACUUM PUMP HEAVY DUTY
EXTENSION HOUSINGBUSHING REMOVERINSTALLER ANDOUTPUT SHAFTSUPPORT FIXTURE
* Speeds up process
CLUTCH DRUMSPRING COMPRESSOR
* Most economical unit
* Long legs for lock ups
* Mounts directly on work
bench or vise.
Also: 727 series
T-0163- DPRESSURE GAUGE
0 - 300 pounds
T-0030- A
T-0033
T-0033- A
T-0099
T-0130
T-0154- HD
T-0156- A
“H” GAUGE UNIVERSAL FRONTPUMP CLEARANCEGAUGE
UNIVERSAL PUMPREMOVER
* Removes conventional
type pumps without
damage.
HEAVY DUTY FRONTPUMP REMOVER
UNIVERSAL SEALREMOVER
BOOT TYPE EXTENSION SEALINSTALLER
HEAVY DUTYSLIDE HAMMER SET
TRANSMISSION HOLDING FIXTUREWITH BASE
ABOVE WITHOUTBASE
T-0156- AF
Contact Your Local Distributor PH: 1-800-531-5978 24 Hr. FAX 210-225-2114
or Tool Truck Dealer www.atec-trans-tool.com
98
Reproduction of this material in whole or in part is strictly prohibited without prior
written consent by ATEC Trans-Tool, LP, including all part numbers, drawings, pictures,
logos, or descriptions. Reproduction of any or any part of these items is civilly and/or
criminally punishable by law.
AUTOMATIC TRANSMISSION TOOLS CHRYSLER
CH
RY
SL
ER
TR
AN
S.
TO
OL
S-E
QU
IP
T-0
T-1441
T-1450
T-3208
T-3229
T-1449
REAR EXTENSIONHOUSING SEAL INSTALLERFor 904 (32RH)
[Use with T-3208]Also: (42RE) (44RE) (46RE)
(47RE), (36RH)
UNIVERSAL DRIVEHANDLE
[Use with T-1450]
RETAINING CLIPINSTALLER ANDREMOVERFor (32RH)
* Used to compress frontclutch assembly
Also: (42RE) (44RE) (46RE)
(47RE), 727 (36RH)
FRONT PUMP OILSEAL INSTALLERFor (30RH)
Also: (42RE) (44RE), 604
(41TE), (42LE)
FRONT PUMP OILSEAL REMOVER For
(30RH) (32RH)
* Removes front camshaft
seal in 3.0 liter OHC V-6
engines.
Also: (41TE), (42LE), (36RH)
T-1319
T-1317
T-1031- A
TRANS BANDADAPTERFor 904 (30RH) (32RH)
* Use with torque wrenchto adjust transmissionbands
Also: (42RE) (44RE) (46RE)
(47RE) (46RH), 727 (36RH)
AIR TEST PLATE
Also: 500, 727
SHIFT SELECTORSHAFT SEAL REMOVER AND INSTALLER
Does not require
draining transmission
fluid.
904 (30RH), 998 (31RH), 999 (32RH)
For moreinformation
aboutATEC products,
log onto our website:
www.atec-trans-tool.com
Contact Your Local Distributor PH: 1-800-531-5978 24 Hr. FAX 210-225-2114
or Mobile Tool Truck Dealer www.atec-trans-tool.com
99
Reproduction of this material in whole or in part is strictly prohibited without prior
written consent by ATEC Trans-Tool, LP, including all part numbers, drawings, pictures,
logos, or descriptions. Reproduction of any or any part of these items is civilly and/or
criminally punishable by law.
AUTOMATICTRANSMISSION
SPECIFIC TOOLS
MIS
C T
RA
NS
MIS
SIO
NT
OO
LS
-EQ
UIP
MITSUBISHI
OLD TO NEW
TRANSMISSION
CONVERSIONS
KM171-5 ..................F3A21-2
KM172-5 ..................F3A22-A
KM175-5................ ..F4A22-2
KM176-5 ..................F4A21-2
KM177-8 ..................F4A23-2
(‘92-AWD) ................W4A32-1
(w/14Bolt Pan) ........F4A33-1
HYUNDAI
Scoupe/Accent ........A4A-F1
Specifications and descriptions on products in this catalog may change without notice.
Copyright ©2007 ATEC Trans-Tool
All intellectual property and
copyrights reserved.
TOYOTA
T-5299 T-0159- A
T-2162
T-2147
T-2195
T-2195- SL
RENAULT CLUTCH DRUM TOOL
VOLVOEXTENSIONHOUSING BUSHINGREMOVER ANDINSTALLER
TOYOTA FRONT PUMP ALIGNMENT BAND
TOYOTAAIR TEST PLATE
TOYOTA GOVERNOR BORE CASESLEEVING TOOL KIT
[Use withT-2195-SL]
TOYOTA GOVERNOR BORE CASESLEEVING TOOL BUSHING REPLACEMENT [Use with T-2195]
RENAULT MB1/MJ3 VOLVO AW55, AW70, AW71
* Opens and closes tangs on overdrive clutch unit.* Pays for itself with one use.* Fits ‘79 and later E-1 and E-2 models
T-2145MITSUBISHI-HYUNDAIEND CLUTCH PISTONINSTALLER
MITSUBISHI / HYUNDAI
MERCEDEST-2146MERCEDES LINKAGEGROMMET
T-1435-ATRANS SHAFT BEARING SNAP RINGREMOVER-INSTALLER
For: 140, 150, 540 Also: (Chrysler 604)
T-3550VW PINION SHAFTRETAINER WRENCH
VOLKSWAGEN
Contact Your Local Distributor PH: 1-800-531-5978 24 Hr. FAX 210-225-2114
or Tool Truck Dealer www.atec-trans-tool.com
100
Reproduction of this material in whole or in part is strictly
prohibited without prior written consent by ATEC Trans-Tool, LP,
including all part numbers, drawings, pictures, logos, or
descriptions. Reproduction of any or any part of these items is
civilly and/or criminally punishable by law.