Verigy V93000 Service Training Module 4: Low Level Diagnostic.
ATE Solutions · 2020. 12. 16. · Use ATE DUT board on bench & bench type tools on ATE Years of...
Transcript of ATE Solutions · 2020. 12. 16. · Use ATE DUT board on bench & bench type tools on ATE Years of...
-
MultiLane’s family of ATE instruments share the same technology inside as their leading-edge
benchtop BERT and SCOPE counterparts. Their 50-GHz bandwidths expand digital and analog
validation and production testing capabilities up to 112 Gbps (PAM4) and have been seamlessly
integrated into Advantest’s V93000 ATE tester.
In addition to BERT and SCOPE instruments, MultiLane offers turn-key solutions for ATE testing. The
solution includes application development, including DUT load board design, and embedded high
throughput application libraries. These solutions will enable fully automated, at-speed testing up to
112 Gbps of high-speed I/O devices.
ATE Solutions
BROCHURE
Available products: 4x50 GHz DSO | 4x28 GBd PAM4
BERT | 4x56 GBd PAM4 BERT | 4x56 GBd PAM4 BERT
with EML drive | 8x28 GBd PAM4 BERT | 4x28 GBd
NRZ with Jitter Injection
Related Products: AT93000-CALKIT, Loadboard
accessories, Specialized high-speed cables
-
Overview of the V93K HSIO System
Advantest and MultiLane offer a single platform solution which leverages the best capabilities and
qualities of both companies.
These two established test equipment companies have developed a highly integrated solution that brings
these high-frequency resources very close to the device under test (DUT) and significantly enhances signal
integrity and test accuracy.
Figure 1: Overview of the V93K HSIO System
Key Features
• Very short distance from DUT to high-speed instruments
• High-speed instruments controlled via Smartest APIs, in line with V93000 tester resource control
• Direct Docking to device handlers and wafer probers
• High-speed BERT testing (56Gbps NRZ, 112Gbps PAM4)
• Multi-Channel Digital Sampling Scope • Widest bandwidth ATE resident DSO
in the industry • Leading edge signal equalization uses
scope’s capability to measure S21 • Long list of interactive test tools • Easy movement of capabilities
between bench and ATE • MultiLane Experience and Support
Benefits
• Supports testing of leading-edge interfaces
• DSO brings a wealth of new test capabilities to the V93000 test platform.
• 50GHz BW consistent with the needs of this high-end digital market.
• BERTs and SCOPEs compensate for cable and DUT board traces.
• Tried-and-true tools to speed debug & bring-up effort.
• Use ATE DUT board on bench & bench type tools on ATE
• Years of experience with high-speed communications testing
-
Instruments Integration in V93000
The V93000 provides our customers fully integrated capabilities to improve the testing of their products and speed their time to market.
Up to 4 instrument cassettes each with up to two high-speed MultiLane instruments
Twinning DUT board
MultiLane backplanes 16x cavities for installing pogo-block segments to bring V93000 signals to DUT board
HSIO card cage Family board routes V93000 signals to pogo-block segments (to DUT board)
Figure 2: Instrument Integration in V93K
Figure 3: System block diagram
-
Instruments Specs Below are the specifications for the MultiLane instruments that have been seamlessly integrated into Advantest’s V93000 ATE tester and can be controlled by Advantest’s SmarTest software platform, and by MultiLane assigned GUIs.
AT4025-50 50 GHz Electrical DSO
Key Features
• Up to 100 MHz sampling rate • Less than 5 seconds TDECQ on a SSPRQ
pattern • Fast pattern capture and DSP thanks to an
FPGA-based architecture. • An extensive library of built-in DSP filters such
as Bessel-Thomson, CTLE, DFE, FFE, de-embedding and component emulation, all available free of charge in the standard GUI.
• User-writable calibration constants • Can be calibrated up to the DUT to include
losses of test fixtures and cables. • Built-in standard masks library • A complete set of APIs and multiple SmarTest
sample code to speed up integration.
AT4039D 4-Lane BERT 28 GBd PAM4/NRZ
Programmable Pattern Generator Features
• High-speed clock out to 3 GHz • Gray coding, polarity inversion • PRBS 7, 9, 13, 15 23, 31, 58 • PRBS 13Q, 15Q, 31Q • Up to 1500 mVppd voltage swing • Patterns are generated algorithmically • Custom patterns: 64 bits can be repeated up
to 255 times and repeated as needed Error Detection Features
• FFE Equalizers • > 13 dB equalization with FFE+CTLE • PAM4 eye balance tuning • Eye contour and PAM level histogram • PRBS 7, 9, 13, 15, 23 & 31 checker • Automatic PRBS detection • Clock-data recover • BER counters
Figure 4: NRZ Sample Measurements
Figure 6: Total Harmonic Distortion
Figure 5: AT4039D Block Diagram
-
AT4039E 4-Lane BERT 56 GBd PAM4/NRZ
Figure 7: PAM eye histogram
PPG Features
• High-speed clock out to 7 GHz • Real FEC and Gray coding • PRBS 7, 9, 13, 15, 23, 31, 58 • PRBS 13Q, 31Q • Up to 800 mVppd voltage swing • Patterns are generated algorithmically • Custom patterns: 64 bits can be repeated up
to 255 times and repeated as needed
ED Features
• FFE Equalizers with reflection cancellation and DFE
• PAM4 eye balance tuning • Eye contour and PAM level histogram • PRBS 7, 9, 13, 15, 23 & 31 checker • Automatic PRBS detection • Clock-data recover • BER counters
AT4039EML 4-Lane SE BERT 56 GBd PAM4/NRZ w/EML Driver
PPG Features
• High-speed clock out to 7 GHz • Real FEC and Gray coding • PRBS 7, 9, 13, 15, 23, 31, 58 • PRBS 13Q, 31Q • Up to 1800 mVppd voltage swing • Single-ended high swing output for EML driving ED Features
• FFE Equalizers with reflection cancellation and DFE
• PAM4 eye balance tuning • Eye contour and PAM level histogram • PRBS 7, 9, 13, 15, 23 & 31 checker
Figure 8: BER curves of 4 channels
Figure 9: Four HSIO MultiLane cassettes mounted inside a twinning frame. Direct docks to Advantest V93K test head
-
AT4079B 8-Lane 1 – 28 GBd PAM4/NRZ
Key Features
• Low cost, instrument-grade BERT optimized for high speed data analysis of 100G/200G/400G transceivers.
• The wide range of bitrate coverage allows phy testing for Ethernet, HDMI 2, USB 3.1, PCIe, Fiber-Channel and others.
• Ability to tune the bit rate in very fine steps to facilitate finding the locking margin.
• FEC support.
• Supports PRBS13Q/15Q/31Q and user-defined patterns.
• API library, sample code and Python wrapper
AT4039B-JIT 4-Lane BERT 28 GBd NRZ Jitter Injection Key Features
• Bitrate coverage 1 – 30 Gbps continuous
• Sinusoidal Jitter Modulation to 100 ps
• Phase skew adjustment to +/- 50 ps
• Random jitter injection
• Random interference injection
• Error insertion
• User defined pattern generation
• Supports all standard PRBS patterns
ATE Applications
• Diff-Diff TIA/Driver test
• SE-Diff TIA/Driver
• Diff-Diff and SE-Diff TIA/Driver with CDR
• ASIC with high-speed IO
SE and Diff TIA measurements Eye captures allow to visualize non-linearities and imbalances.
Some RF amplifiers and TIA have a bandwidth control input and its effect must be characterized.
Figure 11: Eye/Pattern Measurements
Figure 12: Sample TIA S-Parameters vs. BW
Figure 10: Twinning frame enclosure and assembly with one MultiLane cassette
-
Figure 15: SmarTest Integration Model
AT93000-CALKIT • Calkit has load board form factor • It contains all the cables and brackets for quick
mount • Simply undock load board and mount calkit
instead • No need to touch the ML cassettes • Quick connect to external calibration reference
ML4035 • ML4035 cabling de-embedded
Software Integration
• ML Shared Libraries for RHEL5 and RHEL7 • Supports Multisite Testing • SMARTEST sample code available • High throughput features • Co-development MultiLane & Advantest
Figure 13: Fully automated cal procedure
Figure 14: Signal Analyzer
-
Ordering Information
Details Product Number
4-channel 50 GHz Bandwidth Digital Sampling Oscilloscope. ½ cassette AT4025
4-lane 56Gbps (28 GBaud PAM4/NRZ) BERT. ½-cassette AT4039D
4-lane 112Gbps (56 GBaud PAM4/NRZ) BERT. ½-cassette AT4039E
4-lane 112Gbps (56 GBaud PAM4/NRZ) BERT with single-ended high-amplitude outputs for driving EMLs. ½ cassette
AT4039EML
8-Lane 60Gbps (30 GBd PAM4/NRZ) BERT. 1-cassette AT4079B
4-Lane 30 GBd NRZ - BERT with Jitter Injection. 1-cassette AT4039B-JIT
Final Test Load board stiffener assembly AT93000-64150
Wafer Probe Test Load board stiffener assembly AT93000-64170
Family board Contact MultiLane
Family board stiffener E8028-64120
Twinning frame enclosure E8028BF (Frame)
Twinning frame assembly (instrument power delivery, backplane assembly, pressurized
air-cooling system and external faceplate) AT93000-TWINN
Packaged Test and Wafer Probe Test Loadboard Accessories Contact MultiLane
Specialized high-speed cable assemblies Contact MultiLane
Calibration Kit for BERT and DSO (Stiffener with PCB and breakouts to ML4035 and other references, RF cables and pogo brackets) - Calibration software included with ML4035
AT93000-CALKIT
-
North America Worldwide Asia 48521 Warm Springs Blvd. Suite 310 Houmal Technology Park 14F-5/ Rm.5, 14F., No 295 Fremont, CA 94539 Askarieh Main Road Sec.2, Guangfu Rd. East Dist., USA Houmal, Lebanon Hsinchu City 300, Taiwan (R.O.C) +1 510 573 6388 +961 81 794 455 +886 3 5744 591