Assignment 7 2_prototypes
-
Upload
bishoy-saeed -
Category
Education
-
view
57 -
download
1
Transcript of Assignment 7 2_prototypes
Proto Type #1 Blog For Mechanical Engineers – contains
many ideas and tutorials
Mech. Eng…
WWW.mechengprofessional.com
Home Forum Contact
•Mech. Design Principles•Mech. Design Laws•Mech. Design Calculator•International Standards Demo.
•Recruitment Sites•Recruitment Agencies•Business Networks•Freelancing
Job SearchQuick
Reference
Search the site …
About
A fresh grad. Mechanical Engineer believes that we can success faster when we collaborate and exchange experiences. And that’s how I thought about collaboration. This blog.
E-mail …
Subscribe Now for our News Letter
Subscribe
•Ferrous Metals•Non-Ferrous Metals•Ceramics•Composites•Plastics
Material Science
Feedbacks & Suggestions
Deep groove ball bearings have deep, uninterrupted raceway grooves. These raceway grooves have a close osculation with the balls, enabling the bearings to accommodate radial and axial loads in both directions. These bearings are particularly versatile and are simple in designnon separable suitable for high and even very high speedsrobust in operation, requiring little maintenance. … See more.
Topic of the Day - 8/18/2013
Archive of Daily Topics
•Water Jet cutting 8/17/2013•New Trends in Autodesk® Inventor 2014 16/8/2013
CAD Tutorials
•AutoCAD 2012•AU Inventor 2013•Solidworks•AU Plant 3D•More …
+ What Worked ?
! Ideas? Questions
Δ What could be improved ?
•Sections are really helpful and adequate for a start.
•The links of job search are really new and good idea.
•Logic thinking for start a new design.
•The daily topic may be replaced with a weekly topic which cover more specific point and assign the researchers with some problem to solve their feed back.
•It Needs to be more interactive.•New references could be added as HVAC , piping design and hydraulics. •Encyclopedia for mechanical engineers not only for design engineer.
•You may share it with your colleagues. As it seems to be a big project.•To be a mechanical engineering network as facebook.
•what’s better. To focus on my major in the posts, or being more open-minded ?•Will the blog be useful for the stake holder in short period of time ?
Proto Type #2Course workshop event for a team working
in Design company
Course Workshop
Learn Autodesk® Inventor 2013 essentialsIn this workshop all of us will exchange our knowledge about this useful software of 3D modeling of Mechanical parts and assemblies.
• The following Topics will be covered:
- Sketching ( essentials : 2d - 3d).
-Creating Std. Part.
-2D drawing views (IDW or DWG).
Course Workshop
• Who should attend ?
All Mechanical Engineers in our company are invited.
• Time : Sat. 8/19/2013 , Mon. 8/21/2013
From 06:00 PM to 08:00 PM.
Place: ________________ .
For more Details: xxxx xxxx Mob:.0000000
E-Mail: [email protected]
Learn Autodesk® Inventor 2013 essentials
Please Bring your laptops with
setup-ed licensed version of
Autodesk Inventor 2013.
+ What Worked ?
! Ideas? Questions
Δ What could be improved ?
•If about 5 engineers attend , the workshop will be really helpful,•When we share ideas it become more interactive not just a technical data to store but also a context and thinking mindset styles may be learnt.
•Ads and events for the workshop in the company’s notice board.
•Assignment for each one of the team.
•Could we consult any expert or an instructor in some missing points?
•To expand this course into more courses and may be learning soft skills.