Assembly Technologies - PTS air tool... · Intelligent Air Shutoff Tool Selector Clutch Shutoff...
Transcript of Assembly Technologies - PTS air tool... · Intelligent Air Shutoff Tool Selector Clutch Shutoff...
Assembly Technologies
Mechanical Products Limited Warranty:
Electronic Products Limited Warranty:
Software Products Limited Warranty:
The Stanley Works (“Stanley”) warrants its AssemblyTechnologies mechanical products to the originalpurchaser to be free from deficiencies in material orworkmanship for the useful life of the product.
Under this lifetime limited warranty Stanley will, at itsdiscretion, repair or replace any product which, uponinspection, is acknowledged by Stanley to be defective.
This limited lifetime warranty shall apply to productswhich have been used under normal operating conditionsfor their intended use and shall not apply to productswhich have been subjected to: abnormal wear and tear,abuse, misuse, improper maintenance, negligence,continued use after partial failure, accident, alterations orrepairs with non-genuine Stanley replacement parts.
Stanley warrants its Assembly Technologies electronicproducts to the original purchaser to be free fromdeficiencies in material or workmanship for a period ofone year after the date of shipment.
Under this limited warranty Stanley will, at its discretion,repair or replace any product which, upon inspection, isacknowledged by Stanley to be defective.
This warranty shall apply to products which have beenused under normal operating conditions for their intendeduse and shall not apply to products which have beensubjected to: abnormal wear and tear, neglect,component degradation, improper handling, overload,abuse, misuse, improper maintenance, use with improperaccessories, or where alterations have been made.
Stanley warrants its Assembly Technologies softwareproducts to the original purchaser to be free fromdeficiencies in material or workmanship for a period ofone year after the date of shipment.
Under this limited warranty Stanley will, at its discretion,make available replacement software or an upgrade forany product which, upon inspection, is acknowledged byStanley to be defective. Installation of the software shallbe the responsibility of the requestor.
This warranty shall apply to products which have beenused with specified, compatible hardware under normaloperating conditions for their intended use and shall notapply to products which have been: modified, misused,improperly handled, improperly maintained, or used withnon-compatible hardware or accessories.
OEM Products Limited Warranty:
General Terms:
Specification Changes:
Warranty Claims:
Some StanleyAssembly Technologies custom engineeredsystems include components manufactured by others. Thelimited warranties of each individual manufacturer shallapply to these components and Stanley makes norepresentation or warranty of any kind, expressed orimplied, with respect to such components.
This limited warranty gives you specific legal rights and isin lieu of all other warranties, expressed or implied,including the implied warranties of merchantability andfitness for a particular purpose. Some states and countriesdo not allow limitations on implied warranties, so theabove may not apply to you. You may also have otherrights which vary by state or country.
Stanley shall not be responsible for incidental orconsequential damages or the inability to use its productsfor any purpose whatsoever. Stanley's maximum liabilityshall not in any case exceed the contract price for theproducts claimed to be defective. Some states andcountries do not allow the exclusion or limitation ofincidental or consequential damages, so this specificlimitation or exclusion may not apply to you.
Stanley retains the right to discontinue and/or changespecifications of any Assembly Technologies productswithout responsibility for incorporating changes inproducts already sold.
To apply for warranty consideration, the originalpurchaser should take the following action:
a) Contact the Stanley Assembly Technologiescustomer service department to obtain a "ReturnAuthorization Number" and "Warranty Claim ReportForm.”
b) Package the product including proof of purchase andthe completed warranty claim form.
c) Note the Return Authorization Number on theexterior of the package and return freight to:
In the event that a product is repaired or replaced under theterms of the warranty, the warranty period of the repairedor replacement product shall be limited to the remainingportion of the original warranty period.
Stanley Assembly Technologies5335 Avion Park DriveCleveland, Ohio 44143-2326
LIMITED WARRANTY
Intelligent
Air Shutoff Tool Selector
Clutch Shutoff Tool Selector
Pulse Tool Selector
2
Straight Pistol 2
Straight Handheld or Fixtured 2
Angle 3
Hold & Drive 5
Crowfoot/Tubenut Angle 4
2
Hold & Drive 5
2
Straight 2
Pistol 2
Straight Lever 2
Angle 3
Crowfoot/Tubenut Angle 4
How to Use the Air ToolCatalog1. To select a tool using job criteria, see the Tool Selectorstarting on page 2.2. To configure a specific tool, see the pages under ToolSpecification and Configuration.3. Select required options.
Air Shutoff Tool Specification and Configuration
Straight Pistol (1 to 2035 Nm) 6
Straight Lever ( Nm) 8
Angle Lever (2 to 450 Nm) 10
Flush Angle Lever ( Nm) 13
Crowfoot Lever (1.4 to 26 Nm) 17
Tubenut Lever (6.5 to 47 Nm) 17
31
10 to 2035
2 to 450
Hold & Drive Lever (63 to 155 Nm) 16
Straight Lever (4.5 to 48 Nm) 18
Angle Lever (3 to 150 Nm) 19
Flush Angle Lever (3 to 150 Nm) 21
Hold & Drive Lever (15 to 135 Nm) 23
Crowfoot Lever (6 to 60 Nm) 27
Tubenut Lever (10 to 44 Nm) 28
30
30
Clutch Shutoff Tool Specification andConfiguration
Prime Mover Motors
Validation Accessories
Pulse & Impact Tools
PSI Controllers and Qualifiers 33
www.StanleyAssembly.com0807
Tool Selector
Selection Instructions:1. Select the and .
4. Find the and .: All are operator controlled except. Also consider tool ergonomics when selecting
and .
Tool Style Output Type
Catalog Model PageNOTE Tool StylesMotorsTool Style Output
2. Select the that fits the fastener torque.3. Ensure fits your .
Torque RangeTool Clearance Work Space
2
R
H
Work Space
www.StanleyAssembly.com 0807
H
R
R
H
OFF
1 ½” addedfor lever toolclearancedimensions
Output Type
Tool Style CatalogNm in lb mm inch mm inch Model Page
P 1.0 - 3.5 9 - 33 21 0.81 140 5.5 A30URTAI 2.8 - 9 25 - 80 21 0.81 146 5.75 A30URTA - 16S 6.5 - 13 58 - 115 21 0.81 160 6.3 A30URTAT CatalogO Nm ft lb mm inch mm inch ModelL 18 - 35 12.5 - 25 25 1 213 8 A40SBTA - 9
23 - 85 18 - 60 25 1 252 10 A40SBTAA 170 - 420 125 - 310 38 1.5 490 15 A40SRB4TAI S 282 - 563 208 - 415 38 1.5 503 16 A40SRB4TA - 030R T 212 - 424 157 - 313 38 1.5 372 14.8 A40SB4TA - 063
R 264 - 1435 195 -1060 38 1.5 385 15.3 A40SB4TAS A 438 - 2035 323 - 1500 44 1.7 448 18 A40SB5TAH I 350 - 1735 258 - 1280 44 1.7 461 18 A40SRB5TAU G 10 - 20 7.5 - 15 25 1 404 15.9 A40LBTPJ - 15T H 27 - 53 20 - 40 25 1 429 16.9 A40LBTPJ - 6O T 33 - 90 25 - 65 25 1 442 17.4 A40LBTPJ
L F 14 - 28 10.5 - 53 25 1 404 17.4 A40LRBTP - 7E F 22 - 72 16 - 53 25 1 442 17.4 A40LRBTPV 105 - 325 78 - 240 35 1.38 539 21.2 A40LB3TPJE 190 - 380 14 - 280 38 1.5 542 21 A40LB4TPJ- 063R 263 - 1280 193 - 945 38 1.5 555 21.5 A40LB4TPJ
815 - 2035 600 - 1500 43.7 1.72 667 26.2 A40LB5TPJC 4.5 - 23 3.3 - 17 23 0.91 382 15.1 A32LBT 15 - 48 11 - 35 23 0.91 469 18.5 A33LB2N S 7 - 15 5 - 11 25 1 211 8.3 P2LR-15O T 15 - 35 11 - 26 28 1.1 234 9.2 P3LR-35N R 35 - 70 26 - 52 28 1.1 267 10.5 P3LR-70
7 - 15 5 - 11 25 1 178 7 P2PR-15S P 15 - 35 11 - 26 28 1.1 195 7.7 P3PR-35O U 35 - 70 26 - 52 28 1.1 211 8.3 P3PR-70
P L 60 - 120 29 - 88 33 1.3 247 9.7 P4PR-120I S 100 - 200 74 - 147 39 1.5 267 10.5 P5PR-200S T E 13 - 25 9 - 18 23 0.9 199 7.8 PA2PRX-25T R 20 - 40 15 - 30 25 1.0 199 7.8 PA3PRX-40O A 35 - 70 25 - 50 25 1.0 220 8.7 PA3PRX-70L N 60 - 120 42 - 84 30 1.2 253 10 PA4PRX-120
S 25 - 50 18 - 36 23 0.9 167 7.3 KA3PRX-50D 63 - 125 44 - 88 28 1.1 221 8.7 KA3PRX-125U 110 - 220 80 - 162 31 1.2 273 10.7 KA4PRX-220C I 67 - 135 50 - 100 23 0.9 218 8.6 KB3PRX-135E M 360 - 700 270 - 515 38 1.5 434 17.1 KB5PRX-700R P
ACT
31
"R" Side to Center "H" Height/Std Socket 6
18
32
Tool Clearance
7
8
9
Torque Range
ShutoffTorque Range "R" Side to Center "H" Height/QC Chuck
Angle Tool SelectorSelection Instructions:
Tool Style Output Type
Catalog Model PageNOTE Tool StylesMotorsTool Style Output
1. Select the and .
4. Find the and .: All are operator controlled except. Also consider tool ergonomics when selecting
and
3. Ensure fits your .Tool Clearance Work Space
.
H
R
Angle
3
H
R
Flush Angle
www.StanleyAssembly.com
2. Select the Torque Range that fits the fastener torque.
R
H
Work Space
0807
Output Type
Tool Style CatalogNm ft lb mm inch mm inch Model Page
1.8 - 20.5 1.3 - 15.2 13 0.5 72 2.8 A30L_ATA12.5 - 33 9 - 25 17.5 0.69 78 3 A30L_A2ATA
A 17 - 54 12 - 40 17.5 0.69 78 3 A40LATPJMN 15.5 - 75 11.5 - 55 22 0.87 102 4 A40LRA2TPMG 34 - 126 25 - 93 22 0.87 102 4 A40LA2TJPML 63 - 126 47 - 93 26 1.03 111 4.4 A40LRA3TPM
A E 63 - 156 47 - 115 26 1.03 111 4.4 A40LA3TPJMI 103 - 205 75 - 150 26 1.03 117 4.7 A40LRA4TPR 139 - 278 103 - 205 26 1.03 117 4.7 A40LA4TPJ
103 - 205 75 - 150 32 1.25 128 5.1 A40LRA5TP140 - 280 103 - 205 32 1.25 128 5.1 A40LA5TPJ
S 225 - 450 165 - 330 32 1.25 138 5.4 A40LA5TPJL H A 1.8 - 20.5 1.3 - 15.2 13 0.5 34 1.3 A30L_ATAE U N 12.5 - 33 9 - 25 17.5 0.69 40 1.5 A30L_A2ATAV T G 17 - 54 12 - 40 17.5 0.69 40 1.5 A40LATPJM 14E O L 15.5 - 75 11.5 - 55 22 0.87 51 2.0 A40LRA2TPMR F E 34 - 126 25 - 93 22 0.87 51 2.0 A40LA2TJPM
F 63 - 126 47 - 93 26 1.03 60 2.4 A40LRA3TPMF 63 - 156 47 - 115 26 1.03 60 2.4 A40LA3TPJML 103 - 205 75 - 150 26 1.03 60 2.4 A40LRA4TPU 139 - 278 103 - 205 26 1.03 60 2.4 A40LA4TPJS 103 - 205 75 - 150 32 1.25 71 2.8 A40LRA5TPH 140 - 450 103 - 330 32 1.25 71 2.8 A40LA5TPJ
Output Type
Tool Style CatalogNm ft lb mm inch mm inch Model Page
L C A 3 -15 2 - 11 13 0.5 72 2.8 A32RAAE L N 7 - 30 5 - 22 14 0.55 73 2.9 A32L_AV U G 19 - 40 14 - 29 17.5 0.69 78 3.1 A32L_A2ACTE T L 13 - 30 10 - 22 14 0.55 73 2.9 A33L_A1ACTR C E 18 - 59 14 - 44 17.5 0.69 78 3.1 A33L_A2ACT
H 34 - 90 25 - 66 22 0.87 101 4.0 A33L_A3CT68 - 150 50 - 110 26 1.03 111 4.4 A33L_A4CT
L C F 3 -15 2 - 11 13 0.5 34 1.3 A32RAAE L L 19 - 40 14 - 29 17.5 0.69 47 1.9 A32L_A2ACTV U U 18 - 59 14 - 44 17.5 0.69 47 1.9 A33L_A2ACTE T S 34 - 90 25 - 66 22 0.88 47 1.9 A33L_A3CTR C H 68 - 150 50 - 110 26 1.02 60.2 2.4 A33L_A4CT
HANGLE
11
12
13
15
16
19
20
21
22
Shutoff Tool ClearanceTorque Range "R" Side to Center "H" Height/Std Socket
Shutoff Tool ClearanceTorque Range "R" Side to Center "H" Height/Std Socket
10
H
R
REACH
Crowfoot Tool Selector
Tubenut Tool Selector
4
Selection Instructions:Tool Style Output TypeTorque Range
Catalog Model PageNOTE Tool StylesMotorsTool Style Output
1. Select the and .2. Select the that fits the fastener torque.
4. Find the and: All are operator controlled except. Also consider tool ergonomics when selecting
and
.
.
H
R
REACH
www.StanleyAssembly.com
3. Ensure fits your .Tool Clearance Work Space
R
H
Work Space
0807
Output Type
Tool Style Max Hex Size CatalogA Nm ft lb mm inch mm inch mm inch mm (in) Model PageI C 1.4 - 12.7 1 - 9.4 12.7 0.5 16 0.64 46 1.8 13 (1/2) F30LR8TAR R 15 - 26 11 - 19 13.5 0.53 16 0.63 75 3 13 (1/2) F30L69TA
L C O 8.5 - 21 6.5 - 15.5 13.5 0.53 16 0.63 75 3 13 (1/2) F32L69ACTE L W 6 - 22 4.5 - 16 13.5 0.53 16 0.63 43 1.7 13 (1/2) F32LR69ACTV U F 13 - 31 9.5 - 23 13.5 0.53 16 0.63 43 1.7 13 (1/2) F33L69ACTE T O 9 - 28 6.5 - 21 13.5 0.53 16 0.63 75 3 13 (1/2) F33LR69ACTR C O 17 - 38 12 - 28 15.7 0.62 20.5 0.81 71 2.8 13 (1/2) F33L246ACT
H T 9.5 - 30 7 - 22 20.5 0.81 14 0.55 38 1.5 19 (3/4) F33LR29ACT22 - 60 16 - 44 20.5 0.81 28 1.1 38 1.5 19 (3/4) F33LR10CT
17
27
Torque Range "R" Side to Center "H" Height/Std Socket ReachShutoff Tool Clearance
Output Type
Tool Style "R" Side to Center "H" Height/Std Socket Max Hex Size CatalogNm ft lb mm inch mm inch mm inch mm (in) Model Page
12 - 24 9 - 18 8.6 0.334 14 0.54 42 1.65 13 (1/2) F30L346ATAL A 12.5 - 25 9.5 - 19 13 0.52 14 0.54 42 1.65 13 (1/2) F30L252TAE I T 7.5 - 21 5.5 - 15.5 18.5 0.73 14.5 0.57 48 1.88 18 (11/16) F30L74ATAV R U 12 - 47 9 - 35 21.3 0.84 18 0.7 54 2.13 24 (15/16) F30L264TAE C B 14 - 20 10 - 15 13 0.52 14 0.54 42 1.65 13 (1/2) F32L252CTR L E 15 - 21 11 - 15.5 8.6 0.34 14 0.54 42 1.65 13 (1/2) F33L346ACT
U N 10 - 21 8 - 15.5 18.5 0.73 14.5 0.57 48 1.88 18 (11/16) F32L74ACTT U 21 - 30 15 - 22 18.5 0.73 14.5 0.57 48 1.88 18 (11/16) F33L74ACTC T 16 - 44 12 - 32 21.3 0.84 18 0.7 54 2.13 24 (15/16) F32L264CTH
17
28
Torque Range ReachShutoff Tool Clearance
Hold & Drive Tool Selector
Selection Instructions:Tool Style Output Type
Catalog Model PageNOTE Tool StylesMotorsTool Style Output
1. Select the and .
4. Find the and: All are operator controlled except. Also consider tool ergonomics when selecting
and
.
.
5
R
H
Reach for 0extended socket
www.StanleyAssembly.com
2. Select the Torque Range that fits the fastener3. Ensure Tool Clearance fits your Work Space.
R
H
Work Space
0807
Output Type
Tool Style
L H CatalogE A O Nm ft lb mm inch mm inch mm inch Model PageV I L 34 - 155 25 - 115 26 1.03 117 4.62 51 2 A40LA3HTPME R D 34 - 155 34 - 155 26 1.03 117 4.62 51 2 A40LA3HTPJMR C 18 - 80 11 - 63 22 0.87 118 4.65 51 2 A33L_A3HCT
L & 68 - 120 44 - 100 26 1.03 117 4.62 51 2 A33L_A4HCTUT DC RH I
VE
Torque Range
16
23
Shutoff
1" TravelTool Clearance
"H" Height/Std Socket"R" Side to Center Minimum Reach
6 www.StanleyAssembly.com 0408
Pistol Grip Nutrunners - Air Actuated Shutoff
L
OF
F
R.P.M
.
MO
DE
LR
Reversible Models
A30UTA
L
R
Reversible Models
A40SBTA
Tool ConfigurationSelect model and options.
Note:Performance specifications @ 620 Pa (90 psi).
Output torque adjusts to 50% of maximum Rated torque. Min Hose Size: A30 5/16” ID, A40 3/8” IDAir Inlet A30: 1/4” NPT (1/4” ISO Inlet Option), A40: 3/8” NPT (3/8” ISO Inlet Option), Air Consumption
A30: 15 l/s (32 ft3/m), A40: 20 l/s (40 ft3/m),
MODEL
Rated
Speed Output
Reversible RPM Nm lb in mm in mm in kg lb Standard
A30URTA-36 2600 1.0 - 2 9.0 - 17 21 0.81 140 6.3 0.9 2 1/4" QC
A30URTA-25 1850 1.4 - 2.7 12.0 - 24 21 0.81 140 5.5 0.9 2 1/4" QC
A30URTA-18 1360 1.8 - 3.5 17 - 33 21 0.81 140 5.5 0.9 2 1/4" QC
A30URTA-13 1000 2.8 - 5.6 25 - 50 21 0.81 146 5.75 0.9 2 1/4" QC
A30URTA-7 550 4.5 - 9 40 - 80 21 0.81 146 5.75 0.9 2 1/4" QC
A30URTA-5 385 6.5 - 13 58 - 115 21 0.81 160 6.3 1 2.3 1/4" QC
F3504 Side Exhaust Deflector B3432 Swivel Bail A3294 Horzontal Bail
A3486 Dead Handle Ass’y (Recommended for Max Torque >7 Nm, 60 lb in)
F3505 Front Exhaust Deflector
MODEL
Rated
Speed Output
Non-Reversible RPM Nm lb in mm in mm in kg lb Standard
A40SBTA-9 840 18 - 35 12.5 - 25 25 1 175 6.9 2.2 4.9 3/8" SD
A40SBTA-6 560 23 - 45 18 - 35 25 1 201 7.9 2.5 5.5 3/8" SD
A40SBTA-4 330 43 - 85 30 - 60 25 1 201 7.9 2.5 5.5 1/2" SD
A4517 Aluminum Torque Bar 20D117800 3/8" SD Anti Vibration A4498 1/2" SD X 1-1/8" Ext
L4933 3/8" SD X 13-1/2" Ext A4865 1/2" SD X 1-1/2" Ext
F4016 Swivel Bail A4077 3/8" SD X 2-1/2" Ext H4099 1/2" SD X 12-1/2" Ext
A4072 Steel Torque Bar A4263 3/8" SD X 5-1/2" Ext A4775 1/2" SD X 2-1/2" Ext
J4380 Ext Torque Bar H4931 3/8"-24 Threaded A4641 1/2" SD X 4" Ext
H1166 Base Mount Bracket J4247 3/8"-24 Thread X 4" Ext A4642 1/2" SD X 6" Ext
A4263/1 3/8"-24 Thread X 5-1/2" Ext A4079 1/2" SD X 8-1/2" Ext
B4649 3/8"-24 Thread X 6" Ext H4098 1/2" SD X 9-1/2" Ext
M4430 1/2"-20 Threaded
Standard Configuration A40_B Spindle Options
Weight
Torque Range
"R"
Side to Center
"L"
Length Weight
Standard Configuration
Torque Range
"R"
Side to Center
"L"
Length
Mounting Options
Exhaust Option
Mounting Options
Swivel Pistol Grip Nutrunners - Air Actuated Shutoff
7www.StanleyAssembly.com
L
R
Reversible Models
A40S_B5TA
A40S_B4TA
L
R
Reversible Models
Note:Performance specifications @ 620 Pa (90 psi).Output torque adjusts to 50% of maximum Rated torque. Min Hose Size: 1/2” ID
Air Inlet 3/8” NPT (3/8” ISO Inlet Option), Air Consumption: 20 l/s (40 ft3/m)
0408
MODEL
Rated
Speed Output
Non-Reversible RPM Nm lb ft mm in mm in kg lb Standard
A40SB4TA-063 63 212 - 424 157 - 313 38 15 305 12.2 7.8 17.1 3/4" SD
A40SB4TA-050 50 264 - 527 195 - 389 38 15 305 12.2 7.8 17.1 1" SD
A40SB4TA-038 38 356 - 712 263 - 525 38 1.5 305 12.2 7.8 17.1 1" SD
A40SB4TA-023 23 580 - 1160 428 - 855 38 15 305 12.2 7.8 17.1 1" SD
A40SB4TA-018 18 718 - 1435 530 - 1060 38 15 305 12.2 7.8 17.1 1" SD
A40SRB4TA-050 50 170 - 340 125 - 250 38 15 423 12.7 8 17.5 3/4" SD
A40SRB4TA-040 40 210 - 420 155 - 310 38 1.5 423 12.7 8 17.5 3/4" SD
A40SRB4TA-030 30 282 - 563 208 - 415 38 15 423 12.7 8 17.5 1" SD
F4192 Steel Torque Bar F4258 1" SD (SB-063, SRB-50, SRB-40 Models)
F4402 1" SD X 3-3/8" Ext Output Spindle-
F4485 Slave 3/4” Reaction Drive Torque Bar F4232 Swivel Bail
[62-173mm (2.4-6.8in) Adjustment Centers] F4201 Base Mount Bracket
F4857 Slave 3/4” Reaction Drive Torque Bar 20K101100 Mounting Flange
w/Handle [62-173mm (2.4-6.8in) Adjustment Centers]
Mounting Options
Reversible
Standard Configuration A40_B4 Spindle Options
Torque Range
"R"
Side to Center
"L"
Length Weight
MODEL
Rated
Speed Output
Non-Reversible RPM Nm lb ft mm in mm in kg lb Standard
A40SB5TA-029 29 438 - 875 323 - 645 44 1.7 368 14.5 10.9 24 1" SD
A40SB5TA-019 19 650 - 1300 480 - 960 44 1.7 368 14.5 10.9 24 1" SD
A40SB5TA-015 15 813 - 1625 600 - 1200 44 1.7 368 14.5 10.9 24 1" SD
A40SB5TA-011 11 1018 - 2035 750 - 1500 44 1.7 368 14.5 10.9 24 1" SD
A40SRB5TA-023 23 350 - 700 258 - 515 44 1.7 381 15 11.1 24.4 1" SD
A40SRB5TA-015 15 525 - 1050 388 - 775 44 1.7 381 15 11.1 24.4 1" SD
A40SRB5TA-013 13 645 - 1290 475 - 950 44 1.7 381 15 11.1 24.4 1" SD
A40SRB5TA-009 9 868 - 1735 640 - 1280 44 1.7 381 15 11.1 24.4 1" SD
F4192 Steel Torque Bar (Models < 1500 Nm) J4228 Steel Torque Bar (Models > 1500 Nm)
F4201 Base Mount Bracket F4857 Slave 3/4” Reaction Drive Torque Bar w/Handle [62-173mm (2.4-6.8in) Adjustment Centers]
F4232 Swivel Bail F4485 Slave 3/4” Reaction Drive Torque Bar [62-173mm (2.4-6.8in) Adjustment Centers]
20K101100 Mounting Flange
Mounting Options
Reversible
Torque Range
"R"
Side to Center
"L"
Length Weight
Standard Configuration
www.StanleyAssembly.com8
Straight Nutrunners - Air Actuated Shutoff
Tool ConfigurationSelect model and options.
L
R
STA
NLE
YA
IRT
OO
LS
MA
DE
INU
.S.A
.M
AD
EIN
U.S
.A.
L
R
STA
NLE
YA
IRT
OO
LS
MA
DE
INU
.S.A
.
A40LBTP
A40LB3TP
Note:Performance specifications @ 620 Pa (90 psi).Output torque adjusts to 50% of maximum Rated torque. Min Hose Size: 1/2” ID
Air Inlet 3/8” NPT (3/8” ISO Inlet Option), Air Consumption: 20 l/s (40 ft3/m)
MODEL
Rated
Speed Output
Non-Reversible RPM Nm lb ft mm in mm in kg lb Standard
A40LB3TPJ-015 130 105 - 210 78 - 155 35 1.38 434 17.1 6 13.25 3/4" SD
A40LB3TPJ-009 85 163 - 325 120 - 240 35 1.38 434 17.1 6 13.25 3/4" SD
B4487 Steel Torque Bar B4493 3/4" SD X 3-3/4" Ext Output Spindle
N4351 3/4” SD X 7-1/2” Ext Output Spindle
F4015 Swivel Bail
H1140 Base Mount Bracket
J4027 Slave 3/4” Reaction Drive Torque Bar [57-152mm (2.2-6in) Adjustment Centers]
J4028 Slave 3/4” Reaction Drive Torque Bar w/Handle [57-152mm (2.2-6in) Adjustment Centers]
N4580 Slave 3/4” Reaction Drive Torque Bar (Aluminum) w/Handle [57-152mm (2.2-6in) Adjustment Centers]
Mounting Options
Standard Configuration A40_B Spindle Options
WeightTorque Range
"R"
Side to Center
"L"
Length
0408
MODEL
Rated
Speed Output
Non-Reversible RPM Nm lb ft mm in mm in kg lb Standard
A40LBTPJ-15 1440 10 - 20 7.5 - 15 25 1 328 12.9 2.2 5 3/8" SD
A40LBTPJ-6 600 27 - 53 20 - 40 25 1 353 13.9 2.4 6 3/8" SD
A40LBTPJ-5 480 33 - 65 25 - 50 25 1 353 13.9 2.4 6 1/2" SD
A40LBTPJ-4 360 45 - 90 33 - 65 25 1 353 13.9 2.4 6 1/2" SD
A40LRBTP-7 500 14 - 28 10.5 - 21 25 1 353 13.9 2.4 5.3 3/8" SD
A40LRBTP-5 330 22 - 43 16 - 32 25 1 353 13.9 2.4 5.3 1/2" SD
A40LRBTP-4 270 27 - 53 20 - 39 25 1 353 13.9 2.4 5.3 1/2" SD
A40LRBTP-3 200 36 - 72 27 - 53 25 1 353 13.9 2.4 5.3 1/2" SD
A4517 Aluminum Torque Bar L4933 3/8" SD X 13-1/2" Ext B4649 3/8"-24 Thread X 6" ExtA4641 1/2" SD X 4" Ext
A4077 3/8" SD X 2-1/2" Ext A4498 1/2" SD X 1-1/8" Ext A4642 1/2" SD X 6" Ext
F4016 Swivel Bail A4263 3/8" SD X 5-1/2" Ext A4865 1/2" SD X 1-1/2" Ext A4079 1/2" SD X 8-1/2" Ext
A4072 Steel Torque Bar H4931 3/8"-24 Threaded H4099 1/2" SD X 12-1/2" Ext H4098 1/2" SD X 9-1/2" Ext
J4380 Ext Torque Bar J4247 3/8"-24 Thread X 4" Ext A4775 1/2" SD X 2-1/2" Ext M4430 1/2"-20 Threaded
H1166 Base Mount Bracket A4263/1 3/8"-24 Thread X 5-1/2" Ext
Mounting Options
Torque Range
"R"
Side to Center
"L"
Length Weight
Reversible
Standard Configuration A40_B Spindle Options
Straight Nutrunners - Air Actuated Shutoff
Tool ConfigurationSelect model and options.
L
R
STA
NLE
YA
IRT
OO
LS
MA
DE
INU
.S.A
.
A40LB4TPJ
9www.StanleyAssembly.com
Note:Performance specifications @ 620 Pa (90 psi).Output torque adjusts to 50% of maximum Rated torque. Min Hose Size: 1/2” ID
Air Inlet 3/8” NPT (3/8” ISO Inlet Option), Air Consumption: 20 l/s (40 ft3/m)
MODEL
Rated
Speed Output
Non-Reversible RPM Nm lb ft mm in kg lb Standard
A40LB4TPJ-063 57 190 - 380 140 - 280 38 1.5 437 16.9 8 17.7 3/4" SD
A40LB4TPJ-050 50 263 - 525 193 - 385 38 1.5 437 16.9 8 17.7 1" SD
A40LB4TPJ-038 40 405 - 810 298 - 595 38 1.5 437 16.9 8 17.7 1" SD
A40LB4TPJ-023 20 515 - 1030 380 - 760 38 1.5 437 16.9 8 17.7 1" SD
A40LB4TPJ-018 17 640 - 1280 473 - 945 38 1.5 437 16.9 8 17.7 1" SD
F4192 Steel Torque Bar F4402 1" SD X 3-3/8" Ext Output Spindle
Non Transducerized Models Only
F4232 Swivel Bail F4485 Slave 3/4” Reaction Drive Torque Bar
F4201 Reaction Base Mount [62-173mm (2.4-6.8in) Adjustment Centers]
20K101100 Flange F4857 Slave 3/4” Reaction Drive Torque Bar w/Handle
[62–173mm (2.4–6.8in) Adjustment Centers]
lb ft
Standard Configuration
Torque Range
"R"
Side to Center
"L"
Length Weight
A40_B4 Spindle Options
Mounting Options
A40LB5TPJ
L
R MA
DE
INU
.S.A
.M
AD
EIN
U.S
.A.
STA
NLE
YA
IRT
OO
LS
0408
MODEL
Rated
Speed Output
Non-Reversible RPM Nm lb ft mm in kg lb Standard
A40LB4TPJ-063 57 190 - 380 140 - 280 38 1.5 437 16.9 8 17.7 3/4" SD
A40LB4TPJ-050 50 263 - 525 193 - 385 38 1.5 437 16.9 8 17.7 1" SD
A40LB4TPJ-038 40 405 - 810 298 - 595 38 1.5 437 16.9 8 17.7 1" SD
A40LB4TPJ-023 20 515 - 1030 380 - 760 38 1.5 437 16.9 8 17.7 1" SD
A40LB4TPJ-018 17 640 - 1280 473 - 945 38 1.5 437 16.9 8 17.7 1" SD
F4192 Steel Torque Bar F4402 1" SD X 3-3/8" Ext Output Spindle
F4232 Swivel Bail F4485 Slave 3/4” Reaction Drive Torque Bar
F4201 Base Mount Bracket [62-173mm (2.4-6.8in) Adjustment Centers]
20K101100 Mounting Flange F4857 Slave 3/4” Reaction Drive Torque Bar w/Handle
[62–173mm (2.4–6.8in) Adjustment Centers]
lb ft
A40_B4 Spindle Options
Mounting Options
Standard Configuration
"L"
Length
"R"
Side to Center WeightTorque Range
10 www.StanleyAssembly.com 0408
Angle Nutrunners -Air Actuated Shutoff
A30LATA
L
R
H
L
R
H
A40LATPJM
A30LA2ATA
Tool ConfigurationSelect model and options.
L
STA
NLE
YA
IRT
OO
LS
MA
DE
INU
.S.A
.
R
H
Note:Performance specifications @ 620 Pa (90 psi).
Output torque adjusts to 50% of maximum Rated torque. Min Hose Size: A30 5/16” ID, A40 3/8” IDAir Inlet A30: 1/4” NPT (1/4” ISO Inlet Option), A40: 3/8” NPT (3/8” ISO Inlet Option), Air Consumption
A30: 15 l/s (32 ft3/m), A40: 20 l/s (40 ft3/m),
MODEL
Rated
Speed Output
Non-Reversible RPM Nm lb ft mm in mm in mm in kg lb Standard
A30LATA-30 2900 2.2 - 4.3 1.6 - 3.2 13 0.5 34 1.32 206 8.1 0.9 1.9 3/8" SD
A30LATA-20 2000 3.2 - 6.4 2.4 - 4.7 13 0.5 34 1.32 206 8.1 0.9 1.9 3/8" SD
A30LATA-15 1500 4.3 - 8.5 6.3 13 0.5 34 1.32 206 8.1 0.9 1.9 3/8" SD
A30LATA-11 1100 5.8 - 11.5 4.3 - 8.5 13 0.5 34 1.32 213 8.4 0.9 1.9 3/8" SD
A30LATA-6 620 10.3 - 20.5 7.6 - 15.2 13 0.5 34 1.32 226 8.9 0.9 2.4 3/8" SD
A30LRATA-24 2100 1.8 - 3.5 1.3 - 2.5 13 0.5 34 1.32 226 8.9 1 2.1 3/8" SD
A30LRATA-16 1450 2.7 - 5.3 2.0 - 4 13 0.5 34 1.32 226 8.9 1 2.1 3/8" SD
A30LRATA-12 1050 3.5 - 7 2.6 - 5.2 13 0.5 34 1.32 226 8.9 1 2.1 3/8" SD
A30LRATA-9 800 4.8 - 9.5 3.5 - 7 13 0.5 34 1.32 234 9.2 1 2.1 3/8" SD
A30LRATA-5 425 9 - 18 6.5 - 13 13 0.5 34 1.32 248 9.7 1 2.1 3/8" SD
A30LRA2ATA-3 300 12.5 - 25 9.0 - 18 17.5 0.69 40 1.56 297 11.7 1.2 2.6 3/8" SD
A30LRA2ATA-2 225 16. 5 - 33 12.5 - 25 17.5 0.69 40 1.56 297 11.7 1.6 3.6 3/8" SD
A3061 Vertical Bail *B3117 3/8” Double Ended SD F3832 1/4" internal Hex M3131 Exhaust Collector
B3432 Swivel Bail (LA-6, LRA-5) A3156 1/4” SD F3833 5/16" internal Hex
A3157 1/4” Female Hex Magnetic *F3828 3/8" Double Ended SD
Add 4E to Model# 4" A/A2A Models A3158 3/8”-24 Threaded Magnetic F3829 1/2" SD
Add 6E to Model# 6" A/A2A Models A3441 5/16”-24 Threaded Female F3973 3/8" SD Paint Mark Angle Head
Add 10E to Model# 10" A2A Models A3351 1/4”-28 Threaded Female F3831 3/8"-24 FemaleThreaded
Example: A30LRATA-24-4E F3376 Angle Head w/Avdel Attachment *F3830 1/2" Double Ended SD
* For Right Hand Assembly Only
20D250705 A30_LA 20D250702 A30_LA2A
Vinyl Head Cover Options
A30L_A2A Output OptionsA30L_A Output OptionsMounting Options
Gearcase Extensions
Reversible
Torque Range
"R"
Side to Center
"H"
Height
Other Options
"L"
Length Weight
MODEL
Rated
Speed Output
Non-Reversible RPM Nm lb ft mm in mm in mm in kg lb Standard
A40LATPJM-10 975 17 - 33 12 - 24 17.5 0.69 40 1.56 429 16.9 2.5 5.4 3/8" SD
A40LATPJM-6 600 27 - 54 20 - 40 17.5 0.69 40 1.56 455 17.9 2.7 5.9 3/8" SD
Add 4E to Model# 4" A40L_A Models B4723 1/4"internal Hex B4755 3/8"- 24 Threaded Female/Reaction: Screw in Flush Socket
Add 8E to Model# 8" A40L_A Models L4633 5/16" Hex Female/Reaction B4192 3/8"- 24 Threaded Female/Screw in Flush Socket
Add 10E to Model# 10" A40L_A Models B4863 5/16"internal Hex A4066 1/2" SD (Non Rev Only)
Example: A40LATPM-6-4E A4065 3/8" Double Ended SD A4067 1/2" SD Double Ended (Non Rev Only)
20D117800 3/8" SD Anti Vibration B4742 1/2" SD w/Reaction (Non Rev Only)
20D250702 A4427 3/8" SD w/Paint Marker A4069 1/2"-20 Angle Head
Other Options B4368 3/8" SD w/Reaction Mounting Options
S7674 Exhaust Collector J4354 Swivel Bail N4433 Split Reaction Bar
A4590 Reaction Bar H1203 Base Mount Bracket
Vinyl Head Cover Option
Gearcase Extensions A40L_A Output Options
Torque Range
"R"
Side to Center
"H"
Height
"L"
Length Weight
11www.StanleyAssembly.com
Tool ConfigurationSelect model and options.
Angle Nutrunners - Air Actuated Shutoff
L
R
H
MA
DE
INU
.S.A
.
STA
NLE
YA
IRT
OO
LS
L
H
R
MA
DE
INU
.S.A
.
STA
NLE
YA
IRT
OO
LS
OF
F
0408
Special Output Options
Pinch Point Protectors Guided Ext Collars Ultralite Extensions
Output Output
Ext
Length
A30_LA A30_LA 4"
A32A1A A32A1A 6"
A30_LA2A A30_LA2A 8"
40A2 40A2 10"
Each Guided Ext Collar 12"
Requires an Ultralite Extension
20D243003
3/8" SD P/N 1/2" SD P/N
20D243203 20D243206
3/8" SD P/N 1/2" SD P/N 1/2 SD P/N
20D243205
20D124410
20D243002
20D24310420D243103
3/8 SD P/N
20D124412
20D24340620D243405
20D243202
20D124404 20D124504
20D124406 20D124506
20D124408 20D124508
20D124510
20D124512
MODEL
Rated
Speed Output
Non-Reversible RPM Nm lb ft mm in mm in mm in kg lb Standard
A40LA2TPJM-5 475 34 - 68 25 - 50 22 0.87 51 2 480 18.9 3.3 7.3 1/2" SD
A40LA2TPJM-4 320 51 - 102 38 - 75 22 0.87 51 2 480 18.9 3.3 7.3 1/2" SD
A40LA2TPJM-3 255 63 - 126 47 - 93 22 0.87 51 2 480 18.9 3.3 7.3 1/2" SD
A40LRA2TPM-6 530 15.5 - 31 11.5 - 23 22 0.87 51 2 455 17.9 3.1 6.8 1/2" SD
A40LRA2TPM-4 320 25 - 50 19 - 37 22 0.87 51 2 480 18.9 3.3 7.3 1/2" SD
A40LRA2TPM-3 215 38 - 75 28 - 55 22 0.87 51 2 480 18.9 3.3 7.3 1/2" SD
A40LRA2TPM-2 175 47 - 94 35 - 69 22 0.87 51 2 480 18.9 3.3 7.3 1/2" SD
Add 4E to Model# 4" A40L_A2 F4809 1/2" SD Keyed w/Reaction F4804 3/8" SD J4354 Swivel Bail
Add 8E to Model# 8" A40L_A2 F4802 1/2"-20 Threaded Drive Male Keyed F4801 Keyed 1/2" SD A4590 Angle Head Reaction Bar
Add 10E to Model# 10" A40L_A2 F4803 1/2"-20 Threaded Drive Keyedintegral Double End N4433 Angle Head Split Reaction Bar
Example: A40LA2TPM-5-4E F4814 1/2"-20 Threaded internal Keyed w/Reaction H1203 Base Mount Bracket
Other Options
20D250708 S7674 Exhaust Collector
Vinyl Head Cover Option
Mounting OptionsA40L_A2 Output OptionsGearcase Extensions
"R"
Side to Center Weight
"L"
LengthTorque Range
"H"
Height
Reversible
MODEL
Rated
Speed Output
Non-Reversible RPM Nm lb ft mm in mm in mm in kg lb Standard
A40LA3TPJM-3 255 63 - 126 47 - 93 26 1.03 60 2.35 480 18.9 3.6 8 1/2" SD
A40LA3TPJM-2 200 78 - 156 58 - 115 26 1.03 60 2.35 480 18.9 3.6 8 1/2" SD
A40LRA3TPM-1 130 63 - 126 47 - 93 26 1.03 60 2.35 480 18.9 3.6 8 1/2" SD
Add 4E to Model# 4" A40L_A3 F4810 1/2" SD w/Reaction N4434 Angle Head Split Reaction Bar S7674 Exhaust Collector
Add 8E to Model# 8" A40L_A3 F4811 1/2"-20 Threaded Keyed H1141 Base Mount Bracket
Add 10E to Model# 10" A40L_A3 F4806 5/8" SD A4591 Angle Head Reaction Bar
Example: A40LA3TPM-3-4E F4815 5/8" SD w/Reaction J4354 Swivel Bail
Vinyl Head Cover Option 20D250704
Weight
Reversible
Gearcase Extensions A40L_A3 Output Options Mounting Options Other Options
"R"
Side to Center
"H"
Height
"L"
LengthTorque Range
www.StanleyAssembly.com12
Tool ConfigurationSelect model and options.
Angle Nutrunners - Air Actuated Shutoff
L
R
H
MA
DE
INU
.S.A
.
STA
NLE
YA
IRT
OO
LS
L
R
H
MA
DE
INU
.S.A
.M
AD
EIN
U.S
.A.
STA
NLE
YA
IRT
OO
LSS
TAN
LEY
AIR
TO
OLS
Note:Performance specifications @ 620 Pa (90 psi).Output torque adjusts to 50% of maximum Rated torque. Min Hose Size: 1/2” ID
Air Inlet 3/8” NPT (3/8” ISO Inlet Option), Air Consumption: 20 l/s (40 ft3/m)
0408
MODEL
Rated
Speed Output
Non-Reversible RPM Nm lb ft mm in mm in mm in kg lb Standard
A40LA4TPJ-011 110 139 - 278 103 - 205 26 1.03 541 21.3 541 21.3 5 11 5/8" SD
A40LRA4TP-008 75 103 - 205 75 - 150 26 1.03 546 21.5 546 21.5 4.7 10.4 5/8" SD
Mounting Options
Add 4E to Model# 4" A40L_A4 A5184 1/2" SD N4434 Angle Head Split Reaction Bar N4300 Exhaust Collector
Add 8E to Model# 8" A40L_A4 A5189 1/2" SD w/Reaction H1141 Base Mount Bracket
Add 10E to Model# 10" A40L_A4 A5188 5/8" SD w/Reaction A4591 Angle Head Reaction Bar
Example: A40LA4TPM-011-4E F4015 Swivel Bail
20D250704
Gearcase Extensions
Reversible
"L"
Length
A40L_A4 Output Options
WeightTorque Range
"R"
Side to Center
"H"
Height
Other Options
Vinyl Head Cover Option
MODEL
Rated
Speed Output
Non-Reversible RPM Nm lb ft in mm in mm in kg Standard
A40LA5TPJ-011 110 140 - 280 103 - 205 32 1.25 71 2.8 554 21.8 5.2 12.3 5/8" SD
A40LA5TPJ-006 60 225 - 450 165 - 330 32 1.25 71 2.8 554 21.8 5.2 12.3 3/4" SD
A40LRA5TP-008 60 103 - 205 75 - 150 32 1.25 71 2.8 554 21.8 5.6 12.3 5/8" SD
Add 4E to Model# 4" A40L_A5 A5186 3/4" SD w/Reaction F4015 Swivel Bail N4300 Exhaust Collector
Add 8E to Model# 8" A40L_A5 A5455 5/8" SD Keyed S5046 Base Mount Bracket
Add 10E to Model# 10" A40L_A5 A5191 5/8" SD w/Reaction A5082 Angle Head Reaction Bar
Example: A40LA5TPM-011-4E 20D250706Vinyl Head Cover Option
WeightTorque Range
"R"
Side to Center
"H"
Height
"L"
Length
mm
Reversible
Gearcase Extensions A40L_A5 Output Options Mounting Options Other Options
Flush Angle Nutrunners - Air Actuated Shutoff
L
R
H
L
R
H
A30LATA
A30LA2ATA
Tool ConfigurationSelect model and options.
Note:Performance specifications @ 620 Pa (90 psi).
Output torque adjusts to 50% of maximum Rated torque. Min Hose Size: A30 5/16” ID, A40 1/2” IDAir Inlet A30: 1/4” NPT (1/4” ISO Inlet Option), A40: 3/8” NPT (3/8” ISO Inlet Option), Air Consumption
A30: 10 l/s (20 ft3/m), A40: 20 l/s (40 ft3/m),
13www.StanleyAssembly.com0408
MODEL
Rated
Speed Output
Non-Reversible RPM Nm lb ft mm in mm in mm in kg lb Flush Socket Head
A30LATA-30 2900 2.2 - 4.3 1.6 - 3.2 13 0.5 34 1.32 206 8.1 0.9 1.9
A30LATA-20 2000 3.2 - 6.4 2.4 - 4.7 13 0.5 34 1.32 206 8.1 0.9 1.9
A30LATA-15 1500 4.3 - 8.5 6.3 13 0.5 34 1.32 206 8.1 0.9 1.9
A30LATA-11 1100 5.8 - 11.5 4.3 - 8.5 13 0.5 34 1.32 213 8.4 0.9 1.9
A30LATA-6 620 10.3 - 20.5 7.6 - 15.2 13 0.5 34 1.32 226 8.9 0.9 2.4
A30LRATA-24 2100 1.8 - 3.5 1.3 - 2.5 13 0.5 34 1.32 226 8.9 1 2.1
A30LRATA-16 1450 2.7 - 5.3 2.0 - 4 13 0.5 34 1.32 226 8.9 1 2.1
A30LRATA-12 1050 3.5 - 7 2.6 - 5.2 13 0.5 34 1.32 226 8.9 1 2.1
A30LRATA-9 800 4.8 - 9.5 3.5 - 7 13 0.5 34 1.32 234 9.2 1 2.1
A30LRATA-5 425 9 - 18 6.5 - 13 13 0.5 34 1.32 248 9.7 1 2.1
A3061 Vertical Bail J3823 5/16" Magnet. B3686 7mm B3754 10mm
B3432 Swivel Bail (LA-6, LRA-5) B3752 5/16" (8mm) B3752 8mm (5/16") F3667 10mm X 1/4" Ext Magnetic
B3751 1/4" J3041 8mm X 1/4" Ext J3100 10mm X 1/2" Ext Magnetic
Add 4E to Model# 4" A/A2A Models B3753 3/8" J3706 8mm X 1/16" Ext Magnetic L3073 10mm X 1/4" Ext Magnetic
Add 6E to Model# 6" A/A2A Models B3834 4mm L3154 8mm Double Hex
Example: A30LRATA-24-4E 20D250705A30_LA Vinyl Head Cover Option
Weight
B3755
Reversible
B3755
Torque Range
"R"
Side to Center
"H"
Height
"L"
Length
Mounting Options A30_LA Flush Socket Options
Gearcase Extensions
MODEL
Rated
Speed Output
Non-Reversible RPM Nm lb ft mm in mm in mm in kg lb Flush Socket Head
A30LRA2ATA-3 300 12.5 - 25 9.0 - 18 17.5 0.69 40 1.56 297 11.7 1.2 2.6
A30LRA2ATA-2 225 16. 5 - 33 12.5 - 25 17.5 0.69 40 1.56 297 11.7 1.6 3.6
A3061 Vertical Bail F4897 10mm L4935 13mm Surf Dr X 5mm Ext N4686 15mm X 1/4" Ext/Retention Ring
B3432 Swivel Bail (LA-6, LRA-5) J4979 10mm X 1" Ext J4444 13mm X 1" Ext H4459 15mm X 3/8" Ext
N4638 10mm X 3mm Ext H4921 13mm X 1/2" Ext N4769 15mm/Retention Ring
Add 4E to Model# 4" A/A2A Models N4251 10mm X 7mm Ext N4918 13mm X 1/4" Ext N4312 16mm X 1/4" Ext
Add 6E to Model# 6" A/A2A Models F4898 11mm N4086 13mm X 1/8" Ext N4581 16mm X 1/4" Ext Surf Dr
Add 10E to Model# 10" A2A Models L4509 11mm X 5/8" Ext Mag H4494 13mm X 12mm Ext N4343 16mm X 150mm Ext
Example: A30LRA2ATA-3-4E L4006 12mm J4435 14mm H4301 17mm X 5mm Ext
F4899 13mm H4371 14mm Surf Dr X 30mm Ext L4653 5/16"/Retention Ring
20D250702 A30_LA2A L4543 13mm (1/2" Clearance) N4268 14mm X 1/4" Ext F4896 7/16"
L4834 13mm Magnetic F4900 15mm H4236 3/8" Surf Dr X 10mm Ext
L4022 13mm Surf Dr J4684 15mm X 1/2" Ext F4895 1/2"
L4934 13mm Surf Dr X 10mm Ext L4378 15mm X 1/4" Ext
A30_LA2A Vinyl Head Cover Option
Gearcase Extensions
Mounting Options 30_A2A Flush Socket Options
Weight
F3834
Torque Range
"R"
Side to Center
"H"
Height
"L"
Length
Tool ConfigurationSelect model and options.
Flush Angle Nutrunners - Air Actuated Shutoff
L
STA
NLE
YA
IRT
OO
LS
MA
DE
INU
.S.A
.
R
H
Note:Performance specifications @ 620 Pa (90 psi).
Output torque adjusts to 50% of maximum Rated torque. Min Hose Size: A30 5/16” ID, A40 3/8” IDAir Inlet A30: 1/4” NPT (1/4” ISO Inlet Option), A40: 3/8” NPT (3/8” ISO Inlet Option), Air Consumption
A30: 10 l/s (20 ft3/m), A40: 20 l/s (40 ft3/m),
14 0408www.StanleyAssembly.com
MODEL
Rated
Speed Output
Non-Reversible RPM Nm lb ft mm in mm in mm in kg lb Flush Socket Head
A40LATPJM-10 975 17 - 33 12 - 24 17.5 0.69 40 1.56 429 16.9 2.5 5.4
A40LATPJM-6 600 27 - 54 20 - 40 17.5 0.69 40 1.56 455 17.9 2.7 5.9
Add 4E to Model# 4" A40L_A J4413 9/16" X 1/4" Ext A6309 12mm X 3mm Ext Magnetic N4268 14mm X 1/4" Ext
Add 8E to Model# 8" A40L_A 20D109900 5/16" F4899 13mm J4311 14mm X 16mm
Add 10E to Model# 10" A40L_A L4653 5/16"/Retention Ring L4543 13mm (1/2" Clearance) F4900 15mm
Example: A40LATPM-6-4E 20D213501 3/8" L4834 13mm Magnetic A6115 15mm Magnetic 3/8" Ext
H4236 3/8" Surf X 10mm Ext L4022 13mm Surface J4684 15mm X 1/2" Ext
F4896 7/16" L4934 13mm Surface X 10mm Ext 20D213502 15mm X 1/2" Ext
S7674 Exhaust Collector F4895 1/2" L4935 13mm Surface X 5mm Ext L4378 15mm X 1/4" Ext
F4747 9/16" J4444 13mm X 1" Ext N4686 15mm X 1/4" Ext/Ret Ring
Mounting Options F4894 5/8" (16mm) H4921 13mm X 1/2" Ext H4459 15mm X 3/8" Ext
J4354 Swivel Bail F4897 10mm L4435 13mm X 1/2" Ext N4769 15mm/Retention Ring
A4590 Angle Head Reaction Bar J4979 10mm X 1" Ext N4918 13mm X 1/4" Ext N4312 16mm X 1/4" Ext
N4433 Angle Head Split N4638 10mm X 3mm Ext N4086 13mm X 1/8" Ext N4581 16mm X 1/4" Ext Surface
Reaction Bar N4251 10mm X 7mm Ext H4494 13mm X 12mm Ext N4343 16mm X 150mm Ext
F4898 11mm 20D118200 13mm X 23mm Ext Magnetic A6192 17mm 20mm Ext
Vinyl Head Cover Option L4509 11mm X 5/8" Ext Mag J4435 14mm H4301 17mm X 5mm Ext
20D250702 L4006 12mm 20D213500 14mm H4367 E8 Torx
L4839 12mm X 1/4" Ext H4371 14mm Surface X 30mm Ext
Gearcase Extensions A40LA Flush Socket Options
Other Options
Weight
F4901
Torque Range
"R"
Side to Center
"H"
Height
"L"
Length
Tool ConfigurationSelect model and options.
L
R
H
STA
NLE
YA
IRT
OO
LS
L
H
R
MA
DE
INU
.S.A
.
STA
NLE
YA
IRT
OO
LS
OF
F
Note:Performance specifications @ 620 Pa (90 psi).Output torque adjusts to 50% of maximum Rated torque. Min Hose Size: 1/2” ID
Air Inlet 3/8” NPT (3/8” ISO Inlet Option), Air Consumption: 20 l/s (40 ft3/m)
15www.StanleyAssembly.com0408
MODEL
Rated
Speed Output
Non-Reversible RPM Nm lb ft mm in mm in mm in kg lb Flush Socket Head
A40LA2TPJM-5 475 34 - 68 25 - 50 22 0.87 51 2 480 18.9 3.3 7.3 F4807
A40LA2TPJM-4 320 51 - 102 38 - 75 22 0.87 51 2 480 18.9 3.3 7.3 F4812 (Reaction)
A40LA2TPJM-3 255 63 - 126 47 - 93 22 0.87 51 2 48 18.9 3.3 7.3
A40LRA2TPM-6 530 15.5 - 31 11.5 - 23 22 0.87 51 2 455 17.9 3.1 6.8
A40LRA2TPM-4 320 25 - 50 19 - 37 22 0.87 51 2 480 18.9 3.3 7.3 F4807
A40LRA2TPM-3 215 38 - 75 28 - 55 22 0.87 51 2 480 18.9 3.3 7.3 F4812 (Reaction)
A40LRA2TPM-2 175 47 - 94 35 - 69 22 0.87 51 2 480 18.9 3.3 7.3
Add 4E to Model# 4" A40L_A A4824 1/2" J4461 13mm X 3/4" Ext N4801 16mm (5/8") Surf X 1/4" Ext
Add 8E to Model# 8" A40L_A B4466 1/2" SD F4456 14mm J4945 16mm (5/8") X 13mm Ext
Add 10E to Model# 10" A40L_A B4427 1/2" X 5/16" Ext F4731 14mm Double Hex B4681 17mm
Example: A40LA2TPM-5-4E A4543 9/16" L4146 14mm X 1/4" Ext J4609 17mm Fast Lead
Mounting Options A4542 5/8" See 16mm B4152 15mm H4061 17mm Surface Dr X 13mm Ext
J4354 Swivel Bail A4538 3/4" See 19mm F4144 15mm Fast Lead H4545 17mm X 1/4" Ext
A4590 Angle Head Reaction Bar A4680 11/16" L4230 15mm X 1/8" Ext N4878 17mm X 4mm Ext
N4433 Angle Head Split Reaction Bar N4406 11/16" X 3/16" Ext H4802 15mm X 1/2" Ext J4229 17mm X 5mm Ext
H1203 Base Mount Bracket A4649 11/16" X 3/8" Ext B4555 15mm X 3/8" Ext B4405 18mm
Other Options N4470 10mm Fast Lead F4655 15mm X 3/8" Ext Fast Lead L3308 18mm Surface Dr
S7674 Exhaust Collector B4153 13mm F4476 15mm X 3/4" Ext H4235 18mm Surface Dr X 1/2" Ext
Vinyl Head Cover Option L4881 13mm Magnetic H4720 15mm X 5/8" (15mm) Ext N4790 18mm X 1/4" Ext
20D250708 N4336 13mm X 1/2" Ext B4042 15mm X 1" Ext F4589 18mm X 1/2" Ext
B4601 13mm X 3/8" Ext A4542 16mm (5/8") J4832 18mm X 13/16" Ext
A4538 19mm (3/4")
L4670 19mm (3/4") X 1/4" Ext
N4540 19mm (3/4") X 15mm Ext
F4006 19mm (3/4") X 2.5mm Ext
A4650 19mm (3/4") X 3/8" Ext
L4423 19mm (3/4") X 5mm Ext
Weight
Reversible
Gearcase Extensions A40LA2 Flush Socket Options
Torque Range
"R"
Side to Center
"H"
Height
"L"
Length
MODEL
Rated
Speed Output
Non-Reversible RPM Nm lb ft mm in mm in mm in kg lb Flush Socket Head
A40LA3TPJM-3 255 63 - 126 47 - 93 26 1.03 60 2.35 480 18.9 3.6 8 F4808
A40LA3TPJM-2 200 78 - 156 58 - 115 26 1.03 60 2.35 480 18.9 3.6 8
F4813
A40LRA3TPM-1 130 63 - 126 47 - 93 26 1.03 60 2.35 480 18.9 3.6 8 Reaction
Add 4E to Model# 4" A40L_A3 L4018 1/2 SD (Paint Mark) F4514 17mm A6111 21mm Surface
Add 8E to Model# 8" A40L_A3 A4552 7/8 N4999 17mm X 1/4" Ext L4433 21mm X 1" Ext
Add 10E to Model# 10" A40L_A3 A4551 3/4 (19mm) L4671 17mm X 1/2" Ext J4495 21mm X 1/2 Ext
Example: A40LA3TPM-3-4E J4323 3/4(19mm) X 30mm Ext F4687 18mm 20D242901 21mm X 1/4" Ext
N4309 7/8" Fast Lead J4973 18mm X 10mm Ext J4948 21mm X 2.5mm Ext
J4354 Swivel Bail N4456 7/8" Surface L4876 18mm X 13mm Ext H4640 21mm X 4.6mm Ext
H1141 Base Mount Bracket B4266 7/8 X 1/4 Ext L4169 18mm X 25mm Ext H4502 22mm Hex
A4591 Angle Head Reaction Bar F4574 15mm 20D242900 18mm X 7mm Ext H4550 22mm X 1/4 Ext Surface
N4434 Angle Head Split Reaction Bar H4553 15mm X 1/4 Ext L4560 19mm X 10mm Ext H4703 22mm X 10mm Ext Surface
Other Options H4786 15mm X 1/4" Ext Fast Lead F4384 19mm X 3/4 Ext F4385 22mm X 3/4 Ext
S7674 Exhaust Collector F4477 21mm H4702 22mm X 3/4 Ext Surface
20D250704
Mounting Options
Weight
Gearcase Extensions 40L_A3/40L_A4 Flush Socket Options
Torque Range
"R"
Side to Center
"H"
Height
"L"
Length
Vinyl Head Cover Option
Reversible
Hold and DriveAngle NutrunnersAir Actuated Shutoff
Flush Angle Nutrunners - Air Actuated Shutoff Tool ConfigurationSelect model and options.
L
R
H
MA
DE
INU
.S.A
.M
AD
EIN
U.S
.A.
STA
NLE
YA
IRT
OO
LSS
TAN
LEY
AIR
TO
OLS
L
H
R
STA
NLE
YA
IRT
OO
LS
MA
DE
INU
.S.A
.
Note:Performance specifications @ 620 Pa (90 psi).Output torque adjusts to 50% of maximum Rated torque. Min Hose Size: 1/2” ID
Air Inlet 3/8” NPT (3/8” ISO Inlet Option), Air Consumption: 20 l/s (40 ft3/m)
16 0408www.StanleyAssembly.com
Tool ConfigurationSelect model and options.See pp 24-27 for A40LA3HHold & Drive Options
MODEL
Rated
Speed Output
Non-Reversible RPM Nm lb ft mm in mm in mm in kg lb Flush Socket Head
A40LA4TPJ-011 110 139 - 278 103 - 205 26 1.03 541 21.3 541 21.3 5 11
A40LRA4TP-008 75 103 - 205 75 - 150 26 1.03 546 21.5 546 21.5 4.7 10.4
Add 4E to Model# 4" A40L_A4 F4015 Swivel Bail A4591 Angle Head Reaction Bar 20D250706
Add 8E to Model# 8" A40L_A4 H1141 Base Mount Bracket N4434 Angle Head Split
Add 10E to Model# 10" A40L_A4 Reaction Bar N4300 Exhaust Collector
Example: A40LA4TPM-011-4E Flush Socket Options: (see 40L_A3/40L_A4 Flush Socket Options on p 15)
MODEL
Rated
Speed Output
Non-Reversible RPM Nm lb ft in mm in mm in kg Flush Socket Head
A40LA5TPJ-011 110 140 - 280 103 - 205 32 1.25 71 2.8 554 21.8 5.2 12.3
A40LA5TPJ-006 60 225 - 450 165 - 330 32 1.25 71 2.8 554 21.8 5.2 12.3
A40LRA5TP-008 60 103 - 205 75 - 150 32 1.25 71 2.8 554 21.8 5.6 12.3
Add 4E to Model# 4" A40L_A5 F4015 Swivel Bail A5248 3/4" (19mm) A6234 21mm x 1/2" Ext
Add 8E to Model# 8" A40L_A5 S5046 Base Mount Bracket A5479 3/4" (19mm) SD Female A5107 24mm (15/16")
Add 10E to Model# 10" A40L_A5 A5082 Reaction Bar A5112 7/8" (22mm) A5380 24mm (15/16") Fast Lead
Example: A40LA5TPM-011-4E A5183 7/8" (22mm) Fast Lead A5438 24mm (15/16") Surface Drive
N4300 Exhaust Collector A5107 15/16" (24mm) A5261 24mm (15/16") X 8mm Ext
20D250706 A5113 1" A5129 24mm (15/16") X 15mm Ext
A5473 1" Fast Lead A6428 24mm X 1/1" Ext
A5114 1 - 1/16" (27mm) A5114 27mm (1-1/16")
A5651 18mm A5238 27mm (1-1/16") X 2.5mm Ext
A5175 21mm A5574 27mm (1-1/16") X 20mm Ext
"L"
Length Weight
mm
Vinyl Head Cover Option
"R"
Side to Center
"H"
Height
Weight
Reversible
"L"
LengthTorque Range
"R"
Side to Center
"H"
Height
Gearcase Extensions
A5192
A5195 Reaction
A5193
A5194 Reaction
Other Options
A40A5 Flush Socket Options
Other Options
Mounting Options Vinyl Head Cover Option
Reversible
Mounting OptionsGearcase Extensions
Torque Range
MODEL
Rated
Speed Output
Non-Reversible RPM Nm lb ft mm in mm in mm in kg lb Standard
A40LA3HTPJM-3 255 63 - 125 47 - 93 26 1.03 117 4.62 480 18.9 4.2 9.3 1" Tang
A40LA3HTPJM-2 200 78 - 155 58 - 115 26 1.03 117 4.62 480 18.9 4.2 9.3 1" Tang
Add 4E to Model# 4" A40L_A3H H4974 1" Travel Bit Holder H4975 2" Travel Tang Holder J4354 Swivel Bail
Add 8E to Model# 8" A40L_A3H H4969 1½" Travel Tang Holder H4976 2" Travel Bit Holder H1141 Base Mount Bracket
Add 10E to Model# 10" A40L_A3H H4970 1½" Travel Bit Holder H4971 3" Travel Tang Holder A4591 Angle Head Reaction Bar
Example: A40LA3HTPJM-3-4E H4972 3" Travel Bit Holder N4434 Angle Head Split
20D250704 Reaction Bar
"L"
LengthTorque Range Weight
Gearcase Extensions A40L_A3H Output Options Mounting Options
"H"
Height
"R"
Side to Center
Vinyl Head Cover Option
Crowfoot Lever (1.4 to 30 Nm)Tool ConfigurationSelect model and model options.See p 29 for Standard Hex Socket OptionsContact Stanley for Special Socket Options.
# 69T
# 8
46 mm(1.8 in)
L
44.5 mm(1.75 in)
R
R.P
.M.
MO
DEL
25.4 mm (1.0 in)
17www.StanleyAssembly.com0408
42 mm(1.7 in)
R
OFF
MO
DE
L
R.P.M
.
55.9 mm(2.2 in)
42 mm(1.7 in)
R
44 mm(1.75 in)
L
T
Rated
Speed
Maximum
Hex Size
Maximum
Tube Size
MODEL RPM Nm lb ft mm in mm in mm in kg lb mm (in) mm (in)
F30L346ATA-24 325 12 - 24 9 - 18 8.6 0.34 14 0.54 356 14 2.1 4.6
F30L252TA-23 235 12.5 - 25 9.5 - 19 13 0.52 14 0.51 348 13.7 2.1 4.613 (1/2) 8 (5/16)
"R"
Side to Center
"T"
Thickness
"L"
Length WeightTorque Range
35.4 mm (1.4 in)
54 mm (2.125 in)
81.7 mm(3.2 mm)
# 74# 264
R.P.M
.
MO
DE
L
34 mm (1.34 in)
R
42 mm (1.65 in)
L
54 mm(2.13 in)
T
# 346 # 252
Tubenut Lever (6.5 to 47 Nm)
T
34 mm (1.34 in)
54 mm(2.13 in)
L
46.2 mm(1.82 in)
31.75 mm (1.25 in)
50.6 mm(1.99 in)
T
MODEL
Rated
Speed
Maximum
Hex Size
Reversible RPM Nm lb ft mm in mm in mm in kg lb mm (in)
F30LR8TA-24 2400 1.4 - 2.7 1 - 2 12.7 0.5 16 0.64 284 11.2 1.3 2.8
F30LR8TA-16 1650 2 - 4 1.5 - 3 12.7 0.5 16 0.64 284 11.2 1.3 2.8
F30LR8TA-9 900 3.5 - 7 2.7 - 5.3 12.7 0.5 16 0.64 292 11.5 1.3 2.8
F30LR8TA-5 500 6.4 - 12.7 4.7 - 9.4 12.7 0.5 16 0.64 305 12 1.5 3.2
F30L69ATA-2 250 15 - 30 11 - 22 13.5 0.5 16 0.64 389 15.3 1.8 4
F30L69ATA-3 360 13 - 26 9.5 - 19 13.5 0.5 16 0.64 389 15.3 1.8 4
Other Options
A3061 Vertical Bail Add 4E to Model# 4" Ext 20D250723 L8 Exhaust Collector M3131
B3432 Swivel Bail Add 6E to Model# 6" Ext 20D250721 L69
Add 10E to Model# 10" Ext for L8
Example: F30LR8TA-24-4E
Gearcase Extensions
"R"
Side to CenterTorque Range Weight
"T"
Thickness
"L"
Length
Mounting Options
Non-Reversible
13 (1/2)
Vinyl Head Cover Options
Rated
Speed
Maximum
Hex Size
Maximum
Tube Size
MODEL RPM Nm lb ft mm in mm in mm in kg lb mm (in) mm (in)
F30L74ATA-60 600 6.5 - 13 5 - 9.5 18.5 0.73 14.5 0.57 384 15.1 2.2 4.8
F30L74ATA-41 415 9.5 - 19 7 - 14 18.5 0.73 14.5 0.57 384 15.1 2.2 4.8 18 (11/16) 11 (7/16)
F30L74ATA-31 305 12 - 24 9 - 18 18.5 0.73 14.5 0.57 384 15.1 2.2 4.8
F30L264TA-30 305 12 - 23 9 - 17 21.3 0.84 18 0.7 373 14.7 2.2 4.8 24 (15/16) 13 (1/2)
F30L264TA-17 165 16 - 32 12 - 24 21.3 0.84 18 0.7 373 14.7 2.2 4.8
F30L264TA-12 110 24 - 47 18 - 35 21.3 0.84 18 0.7 373 14.7 2.2 4.8
A3061 Vertical Bail Add 4E to Model# 4" Ext 20D250724 L34620D250729 L74 M3131 Exhaust Collector
B3432 Swivel Bail Add 6E to Model# 6" Ext 20D250726 L25220D250728 L264
Add 10E to Model# 10" Ext Example: F30L264TA-12-4E
Torque Range
Mounting Options
"R"
Side to Center
"T"
Thickness
"L"
Length
Gearcase Extensions Vinyl Head Cover Options
Weight
Other Options
www.StanleyAssembly.com 0408
Straight Nutrunners - Clutch Shutoff
Tool ConfigurationSelect model and options.
A32LB
A33LB2
R
L
R
L
Note:Performance specifications @ 620 Pa (90 psi).Output torque adjusts to 50% of maximum Rated torque. Min Hose Size: 5/16” ID
Air Inlet 1/4” NPT (1/4” ISO Inlet Option), Air Consumption: A32 10 l/s (20 ft /m), A33 15 l/s (32 ft /m)3 3
18
MODEL
Rated
Speed Output
Non-Reversible RPM Nm lb ft mm in mm in kg lb Standard
A32LBCT-15 1660 5 - 9.5 3.5 - 7 23 0.91 344 13.6 1.55 3.4 3/8" SD
A32LBCT-10 785 7.5 - 15 5.5 - 11 23 0.91 344 13.6 1.55 3.4 3/8" SD
A32LBCT-6 710 12 - 23 8.5 - 17 23 0.91 344 13.6 1.55 3.4 3/8" SD
A32LRBCT-13 1450 4.5 - 9 3.3 - 6.5 23 0.91 344 13.6 1.55 3.4 3/8" SD
A32LRBCT-9 710 7 - 13.5 5 - 10 23 0.91 344 13.6 1.55 3.4 3/8" SD
A32LRBCT-6 620 11 - 21.5 8 - 16 23 0.91 344 13.6 1.55 3.4 3/8" SD
F3698 Aluminum Torque Bar A8500 Swivel Bail (2 pc assembly) A8362 Side Exhaust Deflector
A8606 Base Mount Bracket A8011 Remote Exhaust Hose Adapter
20K100100 Steel Torque Bar
20K101000 Mounting Flange
Reversible
Standard Configuration Mounting Options Other Options
Torque Range
"R"
Side to Center
"L"
Length Weight
MODEL
Rated
Speed
Torque
Range
Side to
Center
"L"
Length Weight Output
Reversible RPM Nm lb ft mm in mm in kg lb Standard
A33LRB2CT-6 650 15 - 30 11 - 22 23 0.91 431 17 2.1 4.7 3/8" SD
A33LRB2CT-5 540 18 - 36 14 - 27 23 0.91 431 17 2.1 4.7 3/8" SD
A33LRB2CT-3 350 24 - 48 18 - 35 23 0.91 431 17 2.1 4.7 3/8" SD
A4517 Aluminum Torque Bar 20D117800 3/8” SD Anti Vibration H4931 3/8"-24 Threaded H4099 1/2" SD X 12-1/2" Ext
A4078 3/8" SD X 1/2" Ext J4247 3/8"-24 Thread X 4" Ext A4775 1/2" SD X 2-1/2" Ext
A8362 Side Exhaust Deflector L4933 3/8" SD X 13-1/2" Ext A4263/1 3/8"-24 Thr'd X 5-1/2" Ext A4641 1/2" SD X 4" Ext
A8011 Remote Exhaust A4077 3/8" SD X 2-1/2" Ext B4649 3/8"-24 Thr'd X 6" Ext A4642 1/2" SD X 6" Ext
Hose Adapter A4263 3/8" SD X 5-1/2" Ext A4498 1/2" SD X 1-1/8" Ext A4079 1/2" SD X 8-1/2" Ext
Mounting Options A4865 1/2" SD X 1-1/2" Ext H4098 1/2" SD X 9-1/2" Ext
A8500 Swivel Bail (2 pc assembly) J4380 Ext Torque Bar M4430 1/2"-20 Threaded
A4072 Steel Torque Bar H1166 Base Mount Bracket
Standard Configuration A33_B2 Spindle Options
Other Options
www.StanleyAssembly.com0408
OF
F
AIR TOOLS
R
L
H
A32LRAA
A32L_A
L
MA
DE
INU
.S.A
.
ST
AN
LE
YA
IRT
OO
LS
R
H
Angle Nutrunners - Clutch Shutoff
Note:Performance specifications @ 620 Pa (90 psi).Output torque adjusts to 50% of maximum Rated torque. Min Hose Size: 5/16” ID
Air Inlet 1/4” NPT (1/4” ISO Inlet Option), Air Consumption: 10 l/s (20 ft /m)3
19
Tool ConfigurationSelect model and options.
MODEL
Rated
Speed Output
Reversible RPM Nm lb ft mm in mm in mm in kg lb Standard
A32LRAACT-11S3 1050 3 - 6 2 - 4.3 13 0.5 34 1.32 325 12.8 1.4 3 3/8" SD
A32LRAACT-11S2 1050 4.5 - 9 3.5 - 6.5 13 0.5 34 1.32 325 12.8 1.4 3 3/8" SD
A32LRAACT-7S2 700 6 - 12 4.5 - 8.6 13 0.5 34 1.32 325 12.8 1.4 3 3/8" SD
A32LRAACT-5S3 525 3 - 6 2 - 4.3 13 0.5 34 1.32 325 12.8 1.4 3 3/8" SD
A32LRAACT-5S2 525 6 - 12 4.5 - 8.6 13 0.5 34 1.32 325 12.8 1.4 3 3/8" SD
A32LRAACT-5S1 525 7.5 - 15 5.5 - 11 13 0.5 34 1.32 325 12.8 1.4 3 3/8" SD
Add 4E to Model# 4" A/A2A Models *A8699 3/8” Double Ended SD 20D250705 A8576 Swivel Bail
Add 6E to Model# 6" A/A2A Models A8553 1/4” SD
Example: A32LRAACT-11S3-4E A8698 1/4” Female Hex Mag A8362 Side Exhaust Deflector
* For Right Hand Assembly Only A8011 Remote Exhaust Hose Adapter
"H"
Height
"L"
Length
A32L_AA Output Options
WeightTorque Range
"R"
Side to Center
Gearcase Extensions Mounting Options
Other Options
Vinyl Head Cover Option
MODEL
Rated
Speed Output
Non-Reversible RPM Nm lb ft mm in mm in mm in kg lb Standard
A32LA1CT-10 965 7 - 14 5 - 10 14 0.55 35 1.38 340 13.4 1.55 3.4 3/8" SD
A32LA1CT-7 750 10 - 20 7.5 - 15 14 0.55 35 1.38 340 13.4 1.55 3.4 3/8" SD
A32LA1CT-6 600 13 - 25 10 - 19 14 0.55 35 1.38 340 13.4 1.55 3.4 3/8" SD
A32LA1CT-5 500 15 - 30 11 - 22 14 0.55 35 1.38 340 13.4 1.55 3.4 3/8" SD
A32LA2ACT-4 360 20 - 40 15 - 29 17.5 0.69 40 1.56 386 15.2 1.8 4 3/8" SD
A32LRA1CT-9 900 6.5 - 12.5 5 - 9.5 14 0.55 35 1.38 340 13.4 1.55 3.4 3/8" SD
A32LRA1CT-7 665 8.5 - 17 6.5 - 13 14 0.55 35 1.38 340 13.4 1.55 3.4 3/8" SD
A32LRA1CT-5 525 10 - 19 7 - 14 14 0.55 35 1.38 340 13.4 1.55 3.4 3/8" SD
A32LRA1CT-4 445 13 - 25 9 - 18 14 0.55 35 1.38 340 13.4 1.55 3.4 3/8" SD
A32LRA2ACT-3 320 19 - 38 14 - 28 17.5 0.69 40 1.56 386 15.2 1.8 4 3/8" SD
A32/33L_A2A Output Options
Add 4E to Model# 4" A/A2A Models F3832 1/4"internal Hex F3973 3/8" SDPaint Mark 20D122801 Flush Socket Head
Add 6E to Model# 6" A/A2A Models F3833 5/16"internal Hex F3831 3/8"-24 FemaleThreaded
Add 10E to Model# 10" A2A Models *F3828 3/8" Double Ended SD F3829 3/8"-24 Threaded Female 20D255500 12mm Surface Drive
Example: A32LRA1CT-9-4E F3825 3/8" SD w/1/2" Socket Adapter 20D255501 13mm Surface Drive
* For Right Hand Assembly Only *F3830 1/2" Double Ended SD
A8362 Side Exhaust Deflector
A8011 Remote Exhaust Hose Adapter A8500 Swivel Bail 20D250701 A3_A1 20D250702 A30_LA2A
Other Options
"L"
Length Weight
Reversible
Gearcase Extensions A32/33L_A1 Flush Socket Options
Torque Range
"R"
Side to Center
"H"
Height
Mounting Options Vinyl Head Cover Options
A32/33L_A1 Flush Sockets
www.StanleyAssembly.com 0408
L
R
H
MA
DE
INU
.S.A
.
ST
AN
LE
YA
IRT
OO
LS
A33LA4
A33LA
L
H
R
Note:Performance specifications @ 620 Pa (90 psi).Output torque adjusts to 50% of maximum Rated torque. Min Hose Size: 3/8” ID
Air Inlet 1/4” NPT (1/4” ISO Inlet Option), Air Consumption: 15 l/s (32 ft /m)3
Angle Nutrunners - Clutch Shutoff
20
Tool ConfigurationSelect model and options.
MODEL
Rated
Speed Output
Non-Reversible RPM Nm lb ft mm in mm in mm in kg lb Standard
A33LA1ACT-8 825 15 - 30 11 - 22 14 0.55 35 1.38 417 16.4 2 4.4 3/8" SD
A33LA2ACT-6 600 21 - 42 16 - 31 17.5 0.69 40 1.56 432 17 2.1 4.7 3/8" SD
A33LA2ACT-5 500 25 - 50 19 - 37 17.5 0.69 40 1.56 432 17 2.1 4.7 3/8" SD
A33LA2ACT-4 435 30 - 59 22 - 44 17.5 0.69 40 1.56 432 17 2.1 4.7 3/8" SD
A33LA3CT-3 335 38 - 75 28 - 55 22 0.87 50 1.95 457 18 2.7 5.9 1/2" SD
A33LA3CT-2 250 45 - 90 33 - 66 22 0.87 50 1.95 457 18 2.7 5.9 1/2" SD
A33LRA1ACT-7 700 13 - 26 10 - 19 14 0.55 35 1.38 417 16.4 2 4.4 3/8" SD
A33LRA2ACT-5 510 18 - 36 14 - 27 17.5 0.69 40 1.56 432 17 2.1 4.7 3/8" SD
A33LRA2ACT-4 400 23 - 46 17 - 34 17.5 0.69 40 1.56 432 17 2.1 4.7 3/8" SD
A33LRA2ACT-3 335 28 - 55 21 - 41 17.5 0.69 40 1.56 432 17 2.1 4.7 3/8" SD
A33LRA3CT-2 270 34 - 68 25 - 50 22 0.87 50 1.95 457 18 2.7 5.9 1/2" SD
A33LRA3CT-1 200 43 - 85 32 - 63 22 0.87 50 1.95 457 18 2.17 5.9 1/2" SD
Add 4E to Model# 4" A/A2A/A3 Models F3832 1/4"internal Hex F3973 3/8" SD Paint Mark A8500 Swivel Bail
Add 6E to Model# 6" A/A2A Models F3833 5/16"internal Hex F3831 3/8"-24 FemaleThreaded H1203 Base Mount Bracket (33A3)
Add 8E to Model# 8" A3 Models *F3828 3/8" Double Ended SD F3829 3/8"-24 Thrd Female/1/2" A4590 Angle Head Reaction Bar (33A3)
Add 10E to Model# 10" A2A/A3 Models F3825 3/8" SD Soc Adapter N4433 Angle Head Split Reaction Bar
Example: A32LRA1CT-9-4E * For Right Hand Assembly Only *F3830 1/2" Double Ended SD (33A3)
20D250701 A3_A1 20D250702 A3_LA2A M4310 1/2 X 2" Ext Retract Spin Reaction A4255 1/2"-20 Threaded Female Screwin Flush Socket
20D250703 A3_A3 L4632 1/2" Double SD w/Reaction B4756 1/2"-20 Female/Reaction Screw-In Flush Socket
A4644 1/2" SD w/Reaction A4257 1/2"-20 Threaded Male
A8362 Side Exhaust Deflector L4040 Paint Mark Device w/Reaction
A8011 Remote Exhaust Hose Adapter
WeightTorque Range
"R"
Side to Center
"H"
Height
"L"
Length
Reversible
Gearcase Extensions A32/33L_A2A Output Options Mounting Options
Vinyl Head Cover Options A33L_A3 Output Options
Other Options
MODEL
Rated
Speed Output
Non-Reversible RPM Nm Lb ft mm in mm in mm in kg lb Standard
A33LA4CT-015 150 75 - 150 55 - 110 26 1.03 60 2.35 488 19.2 3.4 7.5 1/2" SD
A33LRA4CT-012 120 68 - 135 50 - 100 26 1.03 60 2.35 488 19.2 3.4 7.5 1/2" SD
Add 4E to Model# 4" A33L_A4 F4810 1/2" SD w/Reaction A8500 Swivel Bail A8362 Side Exhaust Deflector
Add 8E to Model# 8" A33L_A4 F4811 1/2"-20 Threaded Keyed H1141 Base Mount Bracket A8011 Remote Exhaust Hose Adapter
Add 10E to Model# 10" A33L_A4 F4806 5/8" SD A4591 Angle Head Reaction Bar
Example: A33LRA4CT-012-4E F4815 5/8" SD w/Reaction N4434 Angle Head Split Reaction Bar
20D250704Vinyl Head Cover Option
Torque Range
"R"
Side to Center
"H"
Height
"L"
Length Weight
Reversible
Gearcase Extentions A33L_A4 Output Options Mounting Options Other Options
www.StanleyAssembly.com0408
OF
F
AIR TOOLS
R
L
H
A32LRAA
A32L_A
LM
AD
EIN
U.S
.A.
ST
AN
LE
YA
IRT
OO
LS
R
H
Flush Angle Nutrunners - Clutch Shutoff
Note:Performance specifications @ 620 Pa (90 psi).Output torque adjusts to 50% of maximum Rated torque. Min Hose Size: 5/16” ID
Air Inlet 1/4” NPT (1/4” ISO Inlet Option), Air Consumption: 10 l/s (20 ft /m)3
21
Tool ConfigurationSelect model and options.
MODEL
Rated
Speed Output
Reversible RPM Nm lb ft mm in mm in mm in kg lb Flush Head
A32LRAACT-11S3 1050 3 - 6 2 - 4.3 13 0.5 34 1.32 325 12.8 1.4 3
A32LRAACT-11S2 1050 4.5 - 9 3.5 - 6.5 13 0.5 34 1.32 325 12.8 1.4 3
A32LRAACT-7S2 700 6 - 12 4.5 - 8.6 13 0.5 34 1.32 325 12.8 1.4 3
A32LRAACT-5S3 525 3 - 6 2 - 4.3 13 0.5 34 1.32 325 12.8 1.4 3
A32LRAACT-5S2 525 6 - 12 4.5 - 8.6 13 0.5 34 1.32 325 12.8 1.4 3
A32LRAACT-5S1 525 7.5 - 15 5.5 - 11 13 0.5 34 1.32 325 12.8 1.4 3
Add 4E to Model# 4" A/A2A Models J3823 5/16" Magnet. B3686 7mm B3754 10mm
Add 6E to Model# 6" A/A2A Models B3752 5/16" (8mm) B3752 8mm (5/16") F3667 10mm X 1/4" Ext Magnetic
Example: A32LRAACT-11S3-4E B3751 1/4" J3041 8mm X 1/4" Ext J3100 10mm X 1/2" Ext Magnetic
B3753 3/8" J3706 8mm X 1/16" Ext Mag L3073 10mm X 1/4" Ext Magnetic
20D250705 B3834 4mm L3154 8mm Double Hex F3587 11mm
Other Options
A8576 Swivel Bail A8362 Side Exhaust Deflector A8011 Remote Exhaust Hose Adapter
A30_LA Flush Socket Options
Weight
A8618
Gearcase Extensions
Mounting Options
Torque Range
"R"
Side to Center
"H"
Height
"L"
Length
Vinyl Head Cover Option
MODEL
Rated
Speed Output
Non-Reversible RPM Nm lb ft mm in mm in mm in kg lb Flush Head
A32LA2ACT-4 360 20 - 40 15 - 29 17.5 0.69 40 1.56 386 15.2 1.8 4
A33LA2ACT-6 600 21 - 42 16 - 31 17.5 0.69 40 1.56 432 17 2.1 4.7
A33LA2ACT-5 500 25 - 50 19 - 37 17.5 0.69 40 1.56 432 17 2.1 4.7
A33LA2ACT-4 435 30 - 59 22 - 44 17.5 0.69 40 1.56 432 17 2.1 4.7
A32LRA2ACT-3 320 19 - 38 14 - 28 17.5 0.69 40 1.56 386 15.2 1.8 4
A33LRA2ACT-5 510 18 - 36 14 - 27 17.5 0.69 40 1.56 432 17 2.1 4.7
A33LRA2ACT-4 400 23 - 46 17 - 34 17.5 0.69 40 1.56 432 17 2.1 4.7
A33LRA2ACT-3 335 28 - 55 21 - 41 17.5 0.69 40 1.56 432 17 2.1 4.7
Add 4E to Model# 4" A2A Models F4897 10mm L4935 13mm Surf X 5mm Ext N4686 15mm X 1/4" Ext/Retention Ring
Add 6E to Model# 6" A2A Models J4979 10mm X 1" Ext J4444 13mm X 1" Ext H4459 15mm X 3/8" Ext
Add 10E to Model# 10" A2A Models N4638 10mm X 3mm Ext H4921 13mm X 1/2" Ext N4769 15mm/Retention Ring
Example: A32LRA2ACT-4-4E N4251 10mm X 7mm Ext N4918 13mm X 1/4" Ext N4312 16mm X 1/4" Ext
F4898 11mm N4086 13mm X 1/8" Ext N4581 16mm X 1/4" Ext Surface Dr
20D250702 A3_LA2A L4509 11mm X 5/8" Ext Mag H4494 13mm X 12mm Ext N4343 16mm X 150mm Ext
L4006 12mm J4435 14mm H4301 17mm X 5mm Ext
A8500 Swivel Bail F4899 13mm H4371 14mm Surf X 30mm Ext L4653 5/16"/Retention Ring
L4543 13mm (1/2" Clearance) N4268 14mm X 1/4" Ext F4896 7/16"
A8362 Side Exhaust Deflector L4834 13mm Magnetic F4900 15mm H4236 3/8" Surface Dr X 10mm Ext
A8011 Remote Exhaust Hose Adapter L4022 13mm Surface Dr J4684 15mm X 1/2" Ext F4895 1/2"
L4934 13mm Surf X 10mm Ext L4378 15mm X 1/4" Ext
Torque Range
"R"
Side to Center
"H"
Height
"L"
Length Weight
F3834
Reversible
F3834
Gearcase Extensions 30A2A Flush Socket Options
Vinyl Head Cover Options
Mounting Options
Other Options
www.StanleyAssembly.com 0408
L
R
H
MA
DE
INU
.S.A
.
ST
AN
LE
YA
IRT
OO
LS
A33LA4
L
H
R
Note:Performance specifications @ 620 Pa (90 psi).Output torque adjusts to 50% of maximum Rated torque. Min Hose Size: 3/8” ID
Air Inlet 1/4” NPT (1/4” ISO Inlet Option), Air Consumption: 15 l/s (32 ft /m)3
Flush Angle Nutrunners - Clutch Shutoff
22
Tool ConfigurationSelect model and options.
MODEL
Rated
Speed Output
Non-Reversible RPM Nm lb ft mm in mm in mm in kg lb Flush Head
A33LA3CT-3 335 38 - 75 28 - 55 22 0.87 50 1.95 457 18 2.7 5.9
A33LA3CT-2 250 45 - 90 33 - 66 22 0.87 50 1.95 457 18 2.7 5.9
A33LRA3CT-2 270 34 - 68 25 - 50 22 0.87 50 1.95 457 18 2.7 5.9
A33LRA3CT-1 200 43 - 85 32 - 63 22 0.87 50 1.95 457 18 2.17 5.9
Add 4E to Model# 4" A3 Models A4824 1/2" F4731 14mm Double Hex H4061 17mm Surf X 13mm Ext
Add 8E to Model# 8" A3 Models B4466 1/2" SD L4146 14mm X 1/4" Ext H4545 17mm X 1/4" Ext
Add 10E to Model# 10" A3 Models B4427 1/2" X 5/16" Ext B4152 15mm N4878 17mm X 4mm Ext
Example: A32LRA3-2-4E A4543 9/16" F4144 15mm Fast Lead J4229 17mm X 5mm Ext
A4542 5/8" (16mm) See 16mm L4230 15mm X 1/8" Ext B4405 18mm
A4538 3/4" (19mm) See 19mm H4802 15mm X 1/2" Ext L3308 18mm Surface Dr
20D250703 A3_A3 A4680 11/16" B4555 15mm X 3/8" Ext H4235 18mm Surf X 1/2" Ext
N4406 11/16" X 3/16" Ext F4655 15mm X 3/8" Ext Fast Lead N4790 18mm X 1/4" Ext
A8362 Side Exhaust Deflector A4649 11/16" X 3/8" Ext F4476 15mm X 3/4" Ext F4589 18mm X 1/2" Ext
A8011 Remote Exhaust N4470 10mm Fast Lead H4720 15mm X 5/8" (15mm) Ext J4832 18mm X 13/16" Ext
Hose Adapter B4153 13mm B4042 15mm X 1" Ext A4538 19mm (3/4")
L4881 13mm Magnetic A4542 16mm (5/8") L4670 19mm (3/4") X 1/4" Ext
H1203 Base Mount Bracket N4336 13mm X 1/2" Ext N4801 16mm (5/8") Surf X 1/4" Ext N4540 19mm (3/4") X 15mm Ext
A4590 Angle Head Reaction Bar B4601 13mm X 3/8" Ext J4945 16mm (5/8") X 13mm Ext F4006 19mm (3/4") X 2.5mm Ext
N4433 Angle Head Split Reaction Bar J4461 13mm X 3/4" Ext B4681 17mm A4650 19mm (3/4") X 3/8" Ext
F4456 14mm J4609 17mm Fast Lead L4423 19mm (3/4") X 5mm Ext
Torque Range
"R"
Side to Center
"H"
Height
"L"
Length Weight
A4539
B4477
(Reaction)
Reversible
Gearcase Extensions A33L_A3 Flush Socket Options
Vinyl Head Cover Options
Other Options
Mounting Options
MODEL
Rated
Speed Output
Non-Reversible RPM Nm Lb ft mm in mm in mm in kg lb Flush Head
A33LA4CT-015 150 75 - 150 55 - 110 26 1.03 60 2.35 488 19.2 3.4 7.5 F4808
F4813 (Reaction)
A33LRA4CT-012 120 68 - 135 50 - 100 26 1.03 60 2.35 488 19.2 3.4 7.5
A33L_A4 Flush Socket Options
Add 4E to Model# 4" A33L_A4 L4018 1/2 SD (Paint Mark) F4514 17mm A6111 21mm Surface
Add 8E to Model# 8" A33L_A4 A4552 7/8 N4999 17mm X 1/4" Ext L4433 21mm X 1" Ext
Add 10E to Model# 10" A33L_A4 A4551 3/4 (19mm) L4671 17mm X 1/2" Ext J4495 21mm X 1/2 Ext
Example: A33LRA4CT-012-4E J4323 3/4(19mm) X 30mm Ext F4687 18mm 20D242901 21mm X 1/4" Ext
N4309 7/8" Fast Lead J4973 18mm X 10mm Ext J4948 21mm X 2.5mm Ext
A8500 Swivel Bail N4456 7/8" Surface L4876 18mm X 13mm Ext H4640 21mm X 4.6mm Ext
H1141 Base Mount Bracket B4266 7/8 X 1/4 Ext L4169 18mm X 25mm Ext H4502 22mm Hex
A4591 Angle Head Reaction Bar F4574 15mm 20D242900 18mm X 7mm Ext H4550 22mm X 1/4 Ext Surface
N4434 Angle Head Split Reaction Bar H4553 15mm X 1/4 Ext L4560 19mm X 10mm Ext H4703 22mm X 10mm Ext Surf
Vinyl Head Cover Option H4786 15mm X 1/4" Ext Fast Lead F4384 19mm X 3/4 Ext F4385 22mm X 3/4 Ext
20D250704
Gearcase Extensions
"R"
Side to Center
"H"
Height
"L"
Length WeightTorque Range
Reversible
Mounting Options
Tool ConfigurationSelect model and options.See pp 24-26 for Hold & Drive Options
Hold and Drive Angle Nutrunners - Clutch Shutoff
A33LA3HCT
MA
DE
INU
.S.A
.
ST
AN
LE
YA
IRT
OO
LS
L
H
R
Note:Performance specifications @ 620 Pa (90 psi).Output torque adjusts to 50% of maximum Rated torque. Min Hose Size: 3/8” ID
Air Inlet 1/4” NPT (1/4” ISO Inlet Option), Air Consumption: 15 l/s (32 ft /m)3
www.StanleyAssembly.com0408 23
A33L43HCT
L
H
R
MODEL
Rated
Speed Output
Non-Reversible RPM Nm lb ft mm in mm in mm in kg lb Standard
A33LA3HCT-6 600 18 - 35 13 - 26 22 0.87 118 4.65 460 18.1 3 6.6 1" Tang
A33LA3HCT-4 395 30 - 60 22 - 44 22 0.87 118 4.65 460 18.1 3 6.6 1" Tang
A33LA3HCT-3 320 36 - 71 26 - 52 22 0.87 118 4.65 460 18.1 3 6.6 1" Tang
A33LA3HCT-2 235 43 - 85 32 - 63 22 0.87 118 4.65 460 18.1 3 6.6 1" Tang
A33LRA3HCT-5 500 15 - 30 11 - 22 22 0.87 118 4.65 460 18.1 3 6.6 1" Tang
A33LRA3HCT-3 310 28 - 55 21 - 41 22 0.87 118 4.65 460 18.1 3 6.6 1" Tang
A33LRA3HCT-2 255 33 - 65 24 - 48 22 0.87 118 4.65 460 18.1 3 6.6 1" Tang
A33LRA3HCT-1 190 40 - 80 30 - 59 22 0.87 118 4.65 460 18.1 3 6.6 1" Tang
Gearcase Extensions
Add 4E to Model# 4" A3 Models N4608 1" Travel Bit Holder A8362 Side Exhaust Deflector A8500 Swivel Bail
Add 8E to Model# 8" A3 Models H4871 1½" Travel Bit Holder A8011 Remote Exhaust Hose Adapter H1203 Base Mount Bracket
Add 10E to Model# 10" A3 Models H4872 1½" Travel Tang Holder A4590 Angle Head Reaction Bar
Example: A33LA3HCT-2-4E N4609 2" Travel Tang Holder N4433 Angle Head Split Reaction Bar
N4610 2" Travel Bit Holder 20D250703Vinyl Head Cover Option
"L"
Length WeightTorque Range
"R"
Side to Center
"H"
Height
Reversible
A33L_A3H Output Options Other Options Mounting Options
MODEL
Rated
Speed Output
Non-Reversible RPM Nm lb ft mm in mm in mm in kg lb Standard
A33LA4HCT-015 150 68 - 135 50 - 100 26 1.03 117 4.62 460 18.1 3.9 8.5 1" Tang
A33LRA4HCT-012 120 60 - 120 44 - 88 26 1.03 117 4.62 460 18.1 3.9 8.5 1" Tang
Add 4E to Model# 4" A33L_A4 H4974 1" Travel Bit Holder A8500 Swivel Bail A8362 Side Exhaust Deflector
Add 8E to Model# 8" A33L_A4 H4969 1½" Travel Tang HolderH1141 Base Mount Bracket A8011 Remote Exhaust Hose Adapter
Add 10E to Model# 10" A33L_A4 H4970 1½" Travel Bit Holder A4591 Angle Head Reaction Bar
Example: A33LRA4HCT-012-4E H4975 2" Travel Tang Holder N4434 Angle Head Split Reaction Bar
Vinyl Head Cover Option H4976 2" Travel Bit Holder
20D250704 H4971 3" Travel Tang Holder
H4972 3" Travel Bit Holder
A33L_A4H Output Options Mounting Options Other Options
Weight
Reversible
Torque Range
"R"
Side to Center
"H"
Height
"L"
Length
Gearcase Extensions
Hold and Drive 33LA3H & 33LA4H/40LA3H Tang Holder Options
Select a Tang H elsNOTE:
older for ModMinimum socket size for each holder.
See p 26 for Sockets.See p 34 to select Cables and Controllers.
3LA3H & 3LA4H/4LA3H
3LA3H & 3LA4H/4LA3H
www.StanleyAssembly.com 080724
33LA3H & 33LA4H/40LA3H Hex Tang Holders [Minimum Socket size]
L4106 11/32" [17mm, 11/16"] 20D214301 8mm Surface [17mm, 11/16"] J4043 10mm Left Hd Fast L [17mm, 11/16"]
N4927 11/32" X 1-1/2 Ext [17mm,11/16"] H4372 8mm X 1" Ext [17mm, 11/16"] N4189 10mm X 1.531" Ext [17mm, 11/16"]
H4210 0.340" [17mm, 11/16"] H4888 8mm X 8" Ext [17mm, 11/16"] F4600 10mm X 13mm [19mm, 3/4"]
L4373 3/8" [17mm, 11/16"] J4382 8mm X 10mm Ext [17mm, 11/16"] H4960 10mm X 32mm Ext [17mm, 11/16"]
N4758 5mm [14mm, 9/16"] L4848 8mm X 19mm Ext [17mm, 11/16"] A6233 10mm X 75mm Ext [17mm, 11/16"]
20D242700 5mm X 6.33mm [12.5mm, 1/2"] L4784 8mm X 80mm Ext [17mm, 11/16"] N4575 10mm X 1/4" Ext [17mm, 11/16"]
N4192 6mm [14mm, 9/16"] F4636 8.5mm [17mm, 11/16"] N4712 10mm X 3-1/8" Ext [17mm, 11/16"]
J4586 7mm [12mm, 1/2"] L4005 9mm [17mm, 11/16"] H4906 10.2mm X 11.5mm [19mm, 3/4"]
20D246900 7mm Surface [14mm 9/16"] L4694 9mm Surface Drive [17mm, 11/16"] L4803 11mm [17mm, 11/16"]
H4161 7mm X 1" Ext [12.5mm, 1/2"] H4499 9mm X 46mm Ext [17mm, 11/16"] 20D214300 11mm Surface [17mm, 11/16"]
A6003 7mm X 6" Ext [12.5mm, 1/2"] F4406 10mm [17mm, 11/16"] 20S200602 11.28 Double Hex Tang Holder
J4456 8mm [14mm, 9/16"] H4877 10mm Fast Lead [17mm, 11/16"] H4874 12mm [19mm, 3/4"]
F4573 8mm (5/16) [17mm, 11/16"] 20D222700 10mm X 6" Ext [17mm, 11/16"] N4064 14mm Double End [16mm, 5/8"]
J4178 1/4" X 5/16" [14mm 9/16"] L4978 6.3mm X 9.8mm [14mm, 17/32"] N4749 8 X 10 X 80mm Ext (0.7 OD) [18,11/16"]
N4826 1/4" X 7/16" [15mm 19/32"] N4834 6.3 X 9.8 X 37mm Ext [14mm,17/32"] N4752 8 X 10 X 157mm Ext (0.7 OD) [18,11/16"]
F4673 .390" X .529" [17mm 11/16"] F4718 6.35mm X 8mm [15mm, 19/32"] L4117 8.2mm X 9.8mm [17mm, 11/16"]
H4475 4mm X 6mm [12mm 1/2"] J4214 6.3 X 8mm X 1/2" Ext [15mm, 19/32"] L4869 8.2 X 9.8 X 80mm Ext [17mm,11/16"]
A6005 4.4mm X 8mm [17mm 11/16"] H4883 6.3 X 8mm X 3/8" Ext [15mm, 19/32"] J4302 8.5mm X 10.5mm [17mm, 11/16"]
H4857 5mm X 7.5mm [12mm 1/2"] H4858 6.35mm X 8.12mm [16mm, 5/8"] J4296 8.5 X 10.5 X 16mm [17mm, 11/16"]
F4544 5mm X 8mm [17mm 11/16"] 20D215400 6.4mm X 8.4mm [17mm, 11/16"] H4905 8.7mm X 11mm X Std Ext [19mm, 3/4"]
L4019 5mm X 8mm [4mm 7/32"] F4870 6.7mm X 7mm [17mm, 11/16"] 20D226100 8.8mm X 9.8mm [17mm, 11/16"]
H4607 5.6mm X 9.8mm [14mm 9/16"] H4725 6.8mm X 8.25mm [17mm, 11/16"] J4990 8.9mm X 11.2mm X 80mm [19mm, 3/4"]
F4572 5.7mm X 8mm [12mm, 1/2"] N4587 7.2 X 9.2 X 80mm Ext [15mm, 19/32"] N4747 9 X 11.5 X 80mm Ext [19mm,3/4"]
H4840 5.7mm X 8mm [17mm, 11/16"] N4658 7.2mm X 9.2mm [15mm, 19/32"] H4578 9mm X 11mm [19mm, 3/4"]
J4830 5.7 X 8 X 1" Ext [15mm, 19/32"] F4975 7.2mm X 10.2mm [17mm, 11/16"] N4031 9mm X 12.5mm [19mm, 3/4"]
H4606 5.7 X 8 X 5mm Ext [12mm, 1/2"] H4064 7.2 X 10.2 X 30mm Ext [16mm,5/8"] N4130 9 X 12.5mm x 32mm Ext [19mm, 3/4"]
N4400 5.7 X 8 X 87mm Ext [15mm, 19/32"] H4829 7.3mm X 9.4mm [17mm, 11/16"] N4132 9 X 12.5mm X 102mm Ext [19mm, 3/4"]
L4524 5.77mm X 8mm [15mm, 19/32"] N4995 7.3 X 10 X 152mm Ext [17mm, 11/16"] N4030 9 X 12.5mm X 145mm Ext [19mm, 3/4"]
H4676 5.9mm X 6.8mm [15mm, 9/16"] N4133 7.6 X 10 x32mm Ext [17mm, 11/16"] N4131 9 X 12.5mm X 27mm Ext [19mm, 3/4"]
F4596 5.9mm X 8.1mm [12mm, 1/2"] N4994 7.6 X 10 x 152mm Ext [17mm,11/16"] N4384 9 X 12.5mm X 52mm Ext [19mm, 3/4"]
H4748 6 & 7 X 8.25mm Ext 2 Step [16mm, 5/8"] N4033 7.6 X 10 X 75mm Ext [17mm,11/16"] N4187 9 X 12.5mm X 62mm Ext [19mm, 3/4"]
L4544 6mm X 7.72mm [12mm, 1/2"] N4699 7.6 X 10 X 102mm Ext [12mm,1/2"] N4029 9 X 12.5mm X 70mm Ext [19mm, 3/4"]
N4716 6mm X 80mm Ext [14mm, 9/16"] N4697 7.6 X 10 X 182mm Ext [12mm,1/2"] N4032 9 X 12.5mmX 75mm Ext [19mm, 3/4"]
N4666 6mm X 8mm [15mm, 9/16"] F4287 7.7mm X 9.8mm [17mm, 11/16"] N4748 9 X 12.6mm X 157mm Ext [19mm, 3/4"]
L4644 6mm X 8mm [17mm, 11/16"] F4542 7.7 X 9.8 X 16mm Ext [17mm,11/16"] L4738 9.2 X 12.5 [19mm, 3/4"]
H4577 6mm X 8mm X 43mm Ext [16mm, 5/8"] N4621 7.7 X 9.8 X 30mm Ext [16mm,5/8"] H4448 9.2 X 12.5 [19mm, 3/4"]
H4593 6mm X 8mm X 47mm Ext [16mm, 5/8"] J4315 7.7 X 9.8mm X 80mm [17mm,11/16"] N4467 9.2 X 12.5 X 8.5mm Ext [19mm, 3/4"]
H4209 6mm X 10mm [16mm, 5/8"] J4317 7.7 X 9.8 X 157mm [17mm,11/16"] H4485 9.2 X 12.5 X 10mm Ext [19mm, 3/4"]
L4017 6mm X 10mm [17mm, 11/16"] N4921 7mm X 10mm [17mm, 11/16"] N4469 9.2 X 12.5 X 26.5mm Ext [18mm, 11/16"]
N4484 6mm X 13mm [16mm, 5/8"] H4761 7mm X 11mm [17mm, 11/16"] H4819 9.2 X 12.5 X 45mm Ext [19mm, 3/4"]
A6136 6.24mm X 7.5mm [17mm, 11/16"] H4488 8 X 10 X 10mm Ext [17mm, 11/16"] L4523 9.2 X 12.5 X 80mm Ext [19mm, 3/4"]
J4877 6.3mm X 7.5mm [17mm, 11/16"] H4958 8 X 10mm X 1-1/8" Ext [17mm,11/16"] H4484 9.2 X 12.5 X 155mm Ext [19mm, 3/4"]
N4413 6.3 X 8.0 X 32mm Ext [15mm, 19/32"] H4904 8 X 10.5mm X 8" Ext [17mm, 11/16"] N4151 9.2 X 12.5 X 157mm Ext [19mm, 3/4"]
H4489 6.3 X 8.7 X 80mm Ext [17mm,11/16"] J4785 8mm X 11mm [17mm, 11/16"] H4483 9.2 X 12.5 X 182mm Ext [19mm, 3/4"]
J4707 6.3mm X 9mm [17mm, 11/16"] H4176 8mm X 11mm/Lead [17mm, 11/16"] L4732 9.2 X 12.5 X 300mm Ext [19mm, 3/4"]
H4115 6.3mm X 9.3mm [17mm, 11/16"] N4483 8mm X 12mm [19mm, 3/4"] H4889 9.4mm X 11.3mm X [19mm, 3/4"]
J4314 9.75mm X 12mm [19mm, 3/4"]
33LA3H & 33LA4H/40LA3H Rectangular Tang Holders [Minimum Socket size]
33LA3H & 33LA4H/40LA3H Special Tang Holders [Minimum Socket size]
H4748 6 & 7 X 8.25mm Ext 2-Step [16mm, 5/8"] A6226 8mm Sq X 47mm Ext [17mm,11/16"] R8461. E12 Torx [17mm, 11/16"]
H4191 8mm Square [17mm, 11/16"] 20D226200 E8 Torx [17mm, 11/16"] H4373 E14 Torx [17mm, 11/16"]
Hold and Drive Options
Typical TangOptions
Female Torx
Female Hex
Rectangular
Bolt/Tang
Nut
ReachTravel
A Tang holds the bolt whilethe nut is tightened
BoltNut
Reach
Travel
A Bit holds the bolt whilethe nut is tightened
Select a Bit Holder for Models
NOTE:Select a 1/4” or 5/16” Bit Holder.
Minimum socket size for each holder.See p 26 for Sockets.
33LA3H or 33LA4H/40LA3H
33LA3H or 33LA4H/40LA3H
Tang holder
MinimumSocket Size toclear holder
Bit holder
MinimumSocket Size toclear header
Bit
Hold and Drive 33LA3H & 33LA4H/40LA3H Bit and Holder Options
NOTE: The bolt can extend beyondthe nut no more than the specifiedTravel distance when tightened.
5/16" Bits
A6180 7/32" Hex A6207 6mm X 5mm Rectangular
A5668 1/4" Hex F4296 7mm Hex
20D246700 5/16" Slotted Hex F4513 8mm Hex
A5666 3/8" Hex H4223 9mm Hex
J4850 7/8" Hex L4259 10mm Hex
F4866 #2 Blade A6341 T30 Hex
F4380 5mm Hex X4198 T30 Torx
F4399 6mm Hex A6373 T40 Torx
A6206 6mm Square A6403 T50 Torx
1/4" Bits
A6178 5/32" Hex
A6179 3/16" Hex
A6453 1/4" Hex
N4451 5/16" Hex
H4533 5/16" Screw
L4898 4mm Hex
F4361 5mm Hex
H4909 7mm Hex
N4991 8mm Hex
H4436 Blade (1/4" X 0.038")
H4280 T15 Torx
A6134 T27 Torx
20D240600 T45 Torx
Typical BitOptions
Male Torx
Male Hex
www.StanleyAssembly.com0807 25
33LA3H & 33LA4H/40LA3H 5/16" Bit Holders [Minimum Socket size]
S7750 5/16" Hex [14mm 9/16"] H4897 5/16" Hex X 60mm Ext [17mm 11/16"]
A6193 5/16" Hex [16mm 5/8"] N4670 5/16" Hex X 80mm Ext [17mm 11/16"]
F4288 5/16" Hex [ 17mm 11/16"] 20D226900 5/16" X 1" Ext [17mm 11/16"]
A6183 5/16" Hex X 1/4" Ext [17mm 11/16"] 20D233100 5/16" X 3" Ext [17mm 11/16"]
N4631 5/16" Hex X 31mm Ext [17mm 11/16"] 20D247200 5/16" X 175mm Ext [17mm 11/16"]
20D215200 1/4" Hex [12mm 7/16"]
F4360 1/4" Hex [13mm (½")]
A6181 1/4" Hex X 1/4" Ext [12mm 7/16"]
A6182 1/4" Hex X 1/4" Ext [13mm 1/2"]
A6452 1/4" Hex, 1 5/8" [12mm 7/16"]
33LA3H & 33LA4H/40LA3H 1/4" Bit Holders [Min Socket size]
Hold and Drive 33LA3H & 33LA4H/40LA3H Socket Options
www.StanleyAssembly.com 080726
33LA3H Hex Sockets 30mm OD (1.2")
A6185 1/2" H4747 14mm 20D245501 16mm X 200mm Ext
N4617 5/8" (16mm) A6451 14mm X 1 Ext H4270 17mm
N4620 5/8" (16mm) X 30mm Ext 20D215100 14mm X 2-5/8" Ext N4619 18mm
A6184 7/16" N4665 15mm 20D227000 18mm X 1" Ext
N4746 3/4" (19mm) H4597 15mm X 1/2"/Access Hole N4746 19mm (3/4")
N4884 9/16" A6282 15mm X 1.0" Ext N4793 21mm
A6186 7/8" (22mm) A6002 15mm X 6" Ext 20D222600 21mm X 6.00" Ext
H4600 7/8" (22mm) X 1-1/8" Ext N4617 16mm (5/8") H4600 22mm (7/8") X 1-1/8" Ext
20D235100 11/16" N4620 16mm (5/8") X 30mm Ext A6261 24mm
20S202000 1" 20D245500 16mm Hex X 60mm Ext 20D222903 24mm X 1/2" Ext
H4435 13mm
A6200 15mm
N4750 17mm
H4651 17mm X 1-1/8" Ext
H4036 18mm
20D233000 18mm X 3" Ext
H4038 18 X 18 Dp X 42mm Ext
H4500 18 X 46mm
H4595 21mm
H4037 21 X 18 Dp X 42mm Ext
20D222000 21 X 80mm Ext Surface
33LA3H Hex Surface Sockets 30mm OD (1.2")
33LA4H/40LA3H Hex Sockets 33mm OD (1.3")
J4090 5/8" (16mm) J4213 15mm X 1/2" Ext H4886 18mm X 8" Ext N4337 21mm X 8mm Ext
L4535 5/8" (16mm) X 10mm Ext J4829 15mm X 1" Ext L4646 18mm X 19mm (3/4") Ext N4466 21mm X 8.5mm Ext
NA (3/4") See 19mm J4090 16mm (5/8") N4468 18mm X 26.5mm Ext H4629 21mm X 52mm Ext
NA (7/8") See 22mm L4535 16mm (5/8") X 10mm Ext H4628 18mm X 32mm (1-1/4") Ext N4382 21mm X 57mm Ext
F4571 9/16" F4285 17mm N4698 18mm X 107mm Ext 20D232600 21mm X 80mm Ext
J4708 9/16" X 1/2 Ext J4304 17mm (Special OD) N4696 18mm X 187mm Ext L4733 21mm X 300mm Ext
L4116 11/16" H4959 17mm X 1-1/8" Ext F4294 19mm (3/4") F4487 22mm (7/8")
L4525 11/16" X 36mm Ext N4975 17mm X 10mm Ext L4886 19mm(3/4") X 3/8" Ext Sp OD A6216 22mm (7/8") Special OD
A6270 15/16" Hex J4467 17mm X 19mm (3/4") Ext L4119 19mm (3/4") X 1.135" OD L4372 22mm (7/8") X 52mm Ext
NA (15/16") See 24mm H4781 17mm X 36mm Ext F4653 19mm (3/4") X 10mm J4989 22mm (7/8") X 80mm Ext
F4867 1-1/16" (27mm) N4398 17mm X 87mm Ext F4541 19mm (3/4") X 16mm Ext 20D232601 23mm Hex A40LA3H
L4897 12mm F4635 18mm J4316 19mm (3/4") X 80mm Ext F4512 24mm (15/16")
F4359 14mm N4457 18mm X 1/4" Ext J4318 19mm (3/4") X 157mm Ext H4820 24mm (15/16") X 45mm Ext
A6231 14mm Double L4118 18mm X 1/4" Ext Spec OD N4177 20mm L4663 24mm X 10mm Ext
F4717 15mm L4556 18mm X 1 1/2" Ext F4401 21mm F4867 27mm (1-1/16")
N4825 15mm (Use/N4826 sp OD) N4711 18mm X 3-1/8" Ext N4188 21mm X 1.531" Ext L4622 30mm (1-3/16")
33LA4H/40LA3H Hex Surface Sockets 33mm OD (1.3")
A6137 10mm H4487 18mm X 10mm N4036 21mm N4137 21mm X 107mm Ext
J4662 15mm H4040 18 X 12mm Dp X 28mm Ext A6467 21mm X 2" Ext N4035 21mm X 150 Ext
N4412 15mm X 37mm Ext N4134 18mm X 37mm Ext 20D226300 21mm X 8.5mm Ext H4447 21mm X 155mm Ext
N4582 15mm X 80mm Ext L4067 18mm X 80mm Ext H4486 21mm X 10mm N4150 21mm X 157mm Ext
J4398 17mm N4715 18mm X 80mm Ext 1.10" OD H4039 21 X 15mm Dp X 28mm Ext H4366 21mm X 182mm
H4576 17mm X 1.5" Ext L4426 18mm X 80mm Ext 1.14" OD N4136 21mm X 32mm (1-1/4") Ext N4440 22mm (7/8")
H4594 17mm X 1-5/8" Ext L4073 18mm X 157mm Ext N4135 21mm X 37mm Ext A6228 22mm (7/8") X 1/4" Ext
H4409 17mm X 37mm Ext L4474 19mm (3/4") N4186 21mm X 67mm L4557 22mm (7/8") X 10mm
H4177 18mm F4869 19mm (3/4") X 7mm N4034 21mm X 75mm N4439 24mm
H4612 18mm Over Size J4381 19mm (3/4") X 18mm Ext N4149 21 X 80mm Ext 1.215" OD 20D213700 24mm X 8" Ext
A6215 18mm X 1-1/2" Ext A6474 19mm Hex X 46mm Ext L4068 21mm X 80mm Ext
33LA4H/40LA3H Hex Fast Lead Sockets 33mm OD (1.3")
J4457 14mm N4926 18mm L4868 19mm (3/4") J4607 22mm (7/8")
J4608 17mm N4925 18mm X 1-1/2" Ext J4044 21mm
www.StanleyAssembly.com0408 27
Crowfoot Nutrunners - Clutch ShutoffTool ConfigurationSelect model and options.See p 29 for Standard SocketsContact Stanley for Special Socket Options
T
L
MA
DE
INU
.S.A
.
ST
AN
LE
YA
IRT
OO
LS
55 mm(2.16 in)
R
31.75 mm (1.25 in)
46.2 mm(1.82 in)
# 246 # 69
46.2 mm(1.82 in)
50.6 mm(1.99 in)
31.75 mm (1.25 in)
T
# 29
43 mm (1.69 in)
50 mm(1.97 in)
38.1 mm (1.5 in)
T
38.1 mm(1.5 in)
71 mm(2.78 in)
71 mm(2.78 in)
LR
T# 10
MODEL
Rated
Speed
Maximum
Hex Size
Non-Reversible RPM Nm lb ft mm In mm in mm in kg lb mm (in)
F32L69ACT-6 600 8.5 - 17 6.5 - 12.5 13.5 0.53 16 0.63 490 19.3 2.1 4.7 13 (1/2)
F32L69ACT-5 400 11 - 21 8 - 15.5 13.5 0.53 16 0.63 490 19.3 2.1 4.7 13 (1/2)
F32LR69ACT-7 650 6 - 12 4.5 - 9 13.5 0.53 16 0.63 490 19.3 2.1 4.7 13 (1/2)
F32LR69ACT-4 425 8.5 - 17 6.5 - 12.5 13.5 0.53 16 0.63 490 19.3 2.1 4.7 13 (1/2)
F32LR69ACT-3 365 11 - 22 8 - 16 13.5 0.53 16 0.63 490 19.3 2.1 4.7 13 (1/2)
MODEL
Rated
Speed
Maximum
Hex Size
Non-Reversible RPM Nm lb ft mm in mm in mm in kg lb mm (in)
F33L69ACT-6 675 13 - 26 9.5 - 19 13.5 0.53 16 0.63 538 21.2 2.4 5.4 13 (1/2)
F33L69ACT-5 560 16 - 31 12 - 23 13.5 0.53 16 0.63 538 21.2 2.4 5.4 13 (1/2)
F33L246ACT-5 500 17 - 33 12 - 24 15.7 0.62 20.5 0.81 500 19.7 2.5 5.5 13 (1/2)
F33L246ACT-4 435 19 - 38 14 - 28 15.7 0.62 20.5 0.81 500 19.7 2.5 5.5 13 (1/2)
F33LR69ACT-6 680 9 - 18 6.5 - 13 13.5 0.53 16 0.63 538 21.2 2.4 5.4 13 (1/2)
F33LR69ACT-4 450 14 - 28 11 - 21 13.5 0.53 16 0.63 538 21.2 2.4 5.4 13 (1/2)
Add 4E to Model# 4" Ext A8500 Swivel Bail 20D250721 L69 20D250717 L246
Add 6E to Model# 6" Ext
Add 10E to Model# 10" Ext Example: F32LR69CT-7-4E
WeightTorque Range
"R"
Nose Radius
Reversible
Gearcase Extensions
"T"
Thickness
"L"
Length
Reversible
Torque Range
"R"
Nose Radius
"T"
Thickness
"L"
Length Weight
Mounting Options Vinyl Head Cover Options
MODEL
Rated
Speed
Maximum
Hex Size
Reversible RPM Nm lb ft mm in mm in mm in kg lb mm (in)
F33LR29ACT-6 610 9.5 - 19 7 - 14 20.5 0.81 14 0.55 498 19.6 2.5 5.4 19 (3/4)
F33LR29ACT-4 400 15 - 30 11 - 22 20.5 0.81 14 0.55 498 19.6 2.5 5.4 19 (3/4)
Add 4E to Model# 4" Ext A8362 Side Exhaust Deflector A8500 Swivel Bail 20D250718 C29
Add 6E to Model# 6" Ext A8011 Remote Exhaust Hose Adapter
Add 10E to Model# 10" Ext
Example: F33LR29ACT-5-4E
MODEL
Rated
Speed
Maximum
Hex Size
Reversible RPM Nm lb ft mm in mm in mm in kg lb mm (in)
F33LR10CT-2 270 22 - 44 16 - 32 20.5 0.81 28 1.1 554 21.8 3.6 7.9 19 (3/4)
F33LR10CT-1 200 30 - 60 22 - 44 20.5 0.81 28 1.1 554 21.8 3.6 7.9 19 (3/4)
Add 4E to Model# 4" Ext A8362 Side Exhaust Deflector 20D250712 L10 A8500 Swivel Bail
Add 8E to Model# 8" Ext A8011 Remote Exhaust Hose Adapter H1203 Base Mount Bracket
Add 10E to Model# 10" Ext A4590 Angle Head Reaction Bar
Example: F33LR10CT-2-4E N4433 Angle Head Split Reaction Bar
Gearcase Extensions Other Options Vinyl Head Cover Options Mounting Options
WeightTorque Range
"R"
Nose Radius
"T"
Thickness
"L"
Length
Gearcase Extensions Other Options
"R"
Nose Radius
"T"
Thickness
"L"
Length WeightTorque Range
Mounting Options Vinyl Head Cover Options
www.StanleyAssembly.com 080728
Tubenut Nutrunners - Clutch Shutoff Tool ConfigurationSelect model and options.See p 29 for Standard SocketsContact Stanley for Special Socket Options
LR81.7 mm(3.2 in)
35.4 mm(1.4 in)
54 mm(2.125 in)
T
R
T
54 mm(2.12 in)
48 mm(1.9 in)
48 mm(1.9 in)
# 74 # 264
54 mm(2.13 in)
34 mm(1.34 in)
T
R L
42 mm(1.65 in)
T
33.3 mm(1.31 in)
55.9 mm(2.2 in)
RL
42 mm(1.65 in)
# 252
# 346
Rated
Speed
Maximum
Hex Size
Maximum
Tube Size
F32 MODEL RPM Nm lb ft mm in mm in mm in kg lb mm (in) mm (in)
F32L252CT-3 350 14 - 20 10 - 15 13 0.52 14 0.54 459 18.07 2.3 5 13 (1/2) 8 (5/16)
F33L346ACT-4 400 15 - 21 11 - 15.5 8.6 0.34 14 0.54 505 19.9 2.5 5.6 13 (1/2) 8 (5/16)
Add 4E to Model# 4" Ext A8362 Side Exhaust Deflector A8500 Swivel Bail 20D250724 L346
Add 6E to Model# 6" Ext A8011 Remote Exhaust Hose Adapter 20D250726 L252
Add 10E to Model# 10" Ext
Example: F32L346ACT-4-4E
Weight
F33 MODEL
Gearcase Extensions Other Options Mounting Options Vinyl Head Cover Options
Torque Range
"R"
Nose Radius
"T"
Thickness
"L"
Length
Rated
Speed
Torque
Range
Nose
Radius
Thickne
ss
"L"
Length Weight
Maximum
Hex Size
Maximum
Tube Size
F32 MODEL RPM Nm lb ft mm in mm in mm in kg lb mm (in) mm (in)
F32L74ACT-5 515 10 - 15 8 - 11 18.5 0.73 14.5 0.57 495 19.5 2.4 5.3 18 (11/16) 11 (7/16)
F32L74ACT-3 340 15 - 21 11 - 15.5 18.5 0.73 14.5 0.57 495 19.5 2.4 5.3 18 (11/16) 11 (7/16)
F32L264CT-3 300 16 - 23 12 - 17 21.3 0.84 18 0.7 485 19.1 2.4 5.2 24 (15/16) 13 (1/2)
F32L264CT-2 235 20 - 29 15 - 21 21.3 0.84 18 0.7 485 19.1 2.4 5.2 24 (15/16) 13 (1/2)
F32L264CT-1 155 31 - 44 22 - 32 21.3 0.84 18 0.7 485 19.1 2.4 5.2 24 (15/16) 13 (1/2)
F33 MODEL
F33L74ACT-29 290 21 - 30 15 - 22 18.5 0.73 14.5 0.57 533 21 2.7 6 27 (1 1/16) 19 (3/4)
Add 4E to Model# 4" Ext A8362 Side Exhaust Deflector 20D250729 L74 A8500 Swivel Bail
Add 6E to Model# 6" Ext A8011 Remote Exhaust Hose Adapter 20D250728 L264 H1203 Base Mount Bracket
Add 10E to Model# 10" Ext A4590 Angle Head Reaction Bar
Example: F33L74ACT-3-4E N4433 Angle Head Split Reaction Bar
Gearcase Extensions Other Options Vinyl Head Cover Options Mounting Options
www.StanleyAssembly.com0807 29
Sta
nd
ard
So
cket
Op
tio
ns
T34
6H
ead
Ext
ensi
on
Soc
ket
www.StanleyAssembly.com 040830
PRIME MOVER MOTORS, AIR SHUT OFF
D
L
50 mm(1.96 in)
3/8-18 NPT (4 places)
Ref 1-5/16”-20 UN-2BLeft Hand Thread
VALIDATION ACCESSORIES
UNIFIED HOSE and TRANSDUCER CABLEASSEMBLIES FOR PA/KA/KB TOOLS
MODEL
Rated
Speed Rated HP Max RPM Output
Non-Reversible RPM Nm lb ft HP RPM Nm lb ft mm in mm in kg lb Standard
M40-16 1600 21 16 1.2 820 11 8 191 7.5 52 2.06 2 4.3 5/8" SD
M40-5 500 65 48 1.2 265 33 24 216 8.5 52 2.06 2.2 4.7 5/8" SD
M40-4 375 87 64 1.2 200 43 32 216 8.5 52 2.06 2.2 4.7 5/8" SD
Special Gearing M40 Output Shaft: 16mm (5/8”) diameter x 44mm (1.75”) long w/5 x 5 x 25 mm (3/16” x 3/16” x 1”) long keyway
Reverse Rotation (Add ‘RR’ MODEL eg: M40RR-5)
Options
WeightStall Torque
Torque
@Max HP
"L"
Length
"D"
Diameter
•
•
•
Tests, calibrates and validates all type of air or DCelectric tools including impact tools.Includes Bellville washers with a simple o-ring retainerfor quick changes in joint hardness.Torque transducer dead weight calibrated with a NISTCertificate. Connects to Torque Transducer Monitor.
Part NoUnified Hose & Cable
Length x FittingPart No
Transducer
Cable Length
24C200008 10' x 3/8" Straight 24C200011 25' Cable
24C200017 16' x 3/8" Straight 24C200012 35' Cable
24C200009 25' x 3/8" Straight 24C200013 40' Cable
24C200016 35' x 3/8" Straight 24C200014 50' Cable
24C200018 50' x 3/8" Straight 24C200015 40' Ext Cable
Benefits/Features• MENU driven set-up• Large back-lit two-line display• OK and NOK indicator lights (based on HI / LOW limits)• PEAK indicator for pulse and impact tool use• Dual filter circuits: choose from Pulse tool or ISO 5393 for direct drive tools• (50) memory counts for STATISTICS including Range, MEAN value, Cpk/Cp
analysis, HI & LOW sample values and RS 232 printer port for data output• Works with any Industry Standard transducer (2Mv/v strain gage type)• Rugged construction with instrument case design
21R205101 Torque Transducer MonitorThe Torque Monitor allows operators to easilyadjust the pneumatic tool and enables qualityinspectors to monitor and record in-process toolperformance. Includes battery charger.
21R205102 Replacement Battery for Monitor
21C200402 Coiled 8' Transducer Cable
Part No Torque Range Angle Range
24V100003 2 - 40 Nm (1.5 - 29 ft lb) 5 - 360°
24V100004 20 - 180 Nm (15 - 132 ft lb) 10 - 450°
24V100005 80 - 350 Nm (59 - 258 ft lb) 20 - 720°
24V100006 200 - 1000 Nm (147 - 737 ft lb) 60 - 760°
Part No
21T200008 Rotary Transducer 5 Nm 1/4" Hex
21T200001 Rotary Transducer 10 Nm 1/4" Hex
21T200002 Rotary Transducer 75 Nm 3/8" SD
21T200003 Rotary Transducer 200 Nm 1/2" SD
21T200004 Rotary Transducer 750 Nm 3/4" SD
Rotary Transducers
TVM Tool Validator
PISTOL NUTRUNNERS, TRANSDUCER SHUTOFFTransducer-Controlled Pulse and Impact Tools•
•
•
Patented non-contact electronic transducer forclosed loop control and improved torque accuracy
Data Output for traceability - every fastening cycledate- and time-stamped for output through serial oroptional EtherNET communication.
NIST traceable certificate issued with every toolfor ISO Standards and Gauge records.
R
L
R
L
R
L
PA PULSE
KA MECHANICAL PULSE KB IMPACT
www.StanleyAssembly.com0408 31
Includes Adjustment WrenchesSee page 33 for PSI-C ControllerSee page 30 for Unified Hose/CableAssemblies
Note:1/4” NPT Inlet, Min. Hose Size: 3/8” IDUse impact rated sockets and impact grade
anti-wobble sockets
PA Applications
••
•
•
•••
•
Light weight and minimal sizeDual chamber motor and double bladepulsing mechanism speed tightening.Ceramic coated aluminum liner and endplates improve durability.Handle positioning balances the tool forbetter operator comfort to point-and-shoot
Free Running FastenersMedium to Hard Joints
Light to Medium Duty Cycle Applications(as many as 12 bolts/minute)Critical Applications requiring 10% totaltorque window accuracy (+7%/- 3%)
Ergonomic Design Reduces Operator Fatigue••
Virtually no torque reaction to the operator.High-Intensity light surrounds the spindle and
illuminates the work surface GREEN (OK) or RED(NOK) after each tightening cycle
KA & KB Applications•
••
•
Free & prevailing torque fasteners such asself-threading bolts.Medium to Soft JointsHeavy Duty Cycle Applications (up to 30bolts/minute)Critical Applications requiring 15% totaltorque window accuracy (+10% /- 5%)
Rated
Speed Output
MODEL RPM Soft Hard Soft Hard mm in mm in cfm L/sec lb Kg StandardPA2PRX-25 8800 13 - 20 13 - 25 9 - 15 9 - 18 23 0.9 161 6.3 28 14 2.6 1.2 3/8" SD
PA3PRX-40 8200 20 - 35 20 - 40 15 - 25 15 - 30 25 1.0 161 6.3 38 19 3.0 1.3 3/8" SD
PA3PRX-70 7800 35 - 60 35 - 70 25 - 43 25 - 50 25 1.0 182 7.2 38 19 3.4 1.5 3/8" SD
PA4PRX-120 6600 60 - 100 60 - 120 42 - 72 42 - 84 30 1.2 202 8.0 42 21 4.8 2.2 1/2" SD
Air
Consumption WeightTorque Range (Nm) Torque Range (lb ft)
"R"
Side to Center
"L"
Length
Rated
Speed Output
MODEL RPM Soft Hard Soft Hard mm in mm in cfm L/sec lb Kg Standard
KA2PRX-35 8200 18 - 30 18 - 35 13 - 21 13 - 25 23 0.9 129 5.8 10 5 2.7 1.2 3/8" SD
KA3PRX-125 7800 63 - 107 63 - 125 44 - 75 44 - 88 28 1.1 183 7.2 20 10 3.6 1.6 3/8" SD
KA4PRX-220 6800 110 - 188 110 - 220 80 - 140 80 - 162 31 1.2 222 8.7 30 15 6.2 2.8 1/2" SD
KB3PRX-135 9800 67 - 115 67 - 135 50 - 85 50 - 100 23 0.9 180 7.1 20 10 3.5 1.6 3/8" SD
KB5PRX-700 4000 360 - 600 360 - 700 270 - 440 270 - 515 38 1.5 367 14.5 40 30 12.6 5.7 3/4" SD
Weight
Air
ConsumptionTorque Range (Nm) Torque Range (lb ft)
R
Side to
Center
"L"
Length
NUTRUNNERS PULSE, REVERSIBLE, NON SHUT OFF
STANDARD CONFIGURATION:Suspension BailAdjustment WrenchesSee page 35 for PSI-Qc QualiferSee page 36 for Hose Light Assemblies
Note:1/4” NPT Inlet, Min. Hose Size: 3/8” ID (5/16" - 15 Models)Use impact rated sockets and impact grade anti-wobble sockets
R
L
STRAIGHTR
L
Enhance Quality and Productivity••••
••••
Transducer-Controlled Pulse Tools•
•••
Dual chamber motor and double blade pulsing mechanism speed tightening.Pistol or straight models fit different tightening applications.Ceramic coated aluminum liner and end plates improve durability.PSI Qualifier compatible for error proofing assembly operations.
Ergonomically quiet with low vibration.Oil-free operation eliminates fogging and product contamination.Comfortable elastomer grip on pistol models.
Data Output for traceability - every fastening cycle date- and time-stamped for outputthrough serial or EtherNET communication.Simple, low-maintenance and inexpensive cables available in three lengths/styles.Air motor and pulse components common to non-transducerized tools.NIST traceable certificate issued with every tool for ISO Standards and Gauge records.
Ergonomic Design Reduces Operator FatigueVirtually no torque reaction to the operator.
PISTOL
Rated
Speed Output
MODEL RPM Soft Hard Soft Hard mm in mm in cfm L/sec lb Kg Standard
P2PR-15 7500 7 - 13 7 - 15 5 - 9 5 - 11 25 1 140 5.5 28 14 1.9 0.9 3/8" SD
P3PR-35 7000 15 - 30 15 - 35 11 - 22 11 - 26 28 1.1 157 6.2 38 19 2.6 1.2 3/8" SD
P3PR-70 6000 35 - 60 35 - 70 26 - 44 26 - 52 28 1.1 173 6.8 38 19 3 1.4 3/8" SD
P4PR-120 5800 60 - 102 60 - 120 29 - 75 29 - 88 33 1.3 196 7.7 42 21 4.2 1.9 1/2" SD
P5PR-200 3500 100 - 170 100 - 200 74 - 125 74 - 147 39 1.5 200 7.9 44 22 8 3.6 3/4" SD
WeightTorque Range (Nm) Torque Range (lb ft)
"R"
Side to Center
"L"
Length
Air
Consumption
Rated
Speed Output
MODEL RPM Soft Hard Soft Hard mm in mm in cfm L/sec lb Kg Standard
P2LR-15 8000 7 - 30 7 - 15 5 - 10 5 - 11 25 1 173 6.8 28 14 1.7 0.8 3/8" SD
P3LR-35 8200 15 - 30 15 - 35 11 - 22 11 - 26 28 1.1 196 7.7 38 19 2.3 1 3/8" SD
P3LR-70 6500 35 - 60 35 - 70 26 - 44 26 - 52 28 1.1 229 9 38 19 2.7 1.2 3/8" SD
Air
Consumption WeightTorque Range (Nm) Torque Range (lb ft)
"R"
Side to Center
"L"
Length
www.StanleyAssembly.com 080732
Transducer Torque Control Improves PrecisionWith Traceability
Enhances Error Proofing
•
•
•
•
•
As many as four parameter sets simplify tool changes fordifferent joints.
Transducer control gives higher accuracy.
Data Transfer Unit Option for traceability - every fasteningcycle date and time-stamped for output through serial orEtherNET communication.
Red or Green lights signal the operator of cycle status foreach fastener and the total assembly sequence.
Limits control includes torque and pulse counts to detecttightening errors.
PSI-C Transducerized Pulse Tool Process Controller
www.StanleyAssembly.com 33
Error Proofing with Transducerized Pulse Tools
The controls the torque of transducer pulseand impact tools. Functions include tighteningcontrol, network connection, and POKE YOKE boltcounting and qualifying. Simple MENU programmingreduces set-up time to less than a minute.
PSI-C
Pressure control method adjusts the linepressure for more repeatable results.
Torq
ueS
catte
r
With StanleyPressureControl
Without StanleyPressureControl
Part ExitPart Entry
PLC
Plant Air
Bolts that do not meet torquespecifications are identified for rework
The PSI-C compares actual torque resultsto quality limits, counts fastened bolts anddetects cross-threads, re-hits, slip-offs.Parts exit the workstation only after allbolts are fastened correctly.
PSI-C Transducerized Pulse Tool Process Controller
•
••
•
•
•
Auto CAL CORRECT enables calibration to your torque standardwithout guesswork.
Two-step tightening for multi-fastener patterns.
DOWNSHIFT feature allows high speed run-down with shift toslow speed final pulsing for accurate control.
DOWNSHIFT programmable to control torque overshoot byrunning at reduced RPM until reaching threshold torque.
JOINT CONDITIONING allows additional pulsing after reachingtorque to counter torque relaxation.
MIN & MAX Pulse COUNT enables error-proofing to detect crossthreads, strip-outs, slip-off or premature throttle release.
PSI Menus Simplify Assembly Setup
PSI-C displaysprogramming optionsand assembly results
Up/Down keysscroll menu
options
Cycle and Batch LED’sGreen OK, Red NOK
Front panel for Flash-programmingand DTU access (DataTransferUnit)
Self contained—all air & electricalconnections in one box
PSI - C CONTROLLER SPECIFICATIONSOperator Interface Inputs/Outputs:
Dual Line 0.5” LCD backlit (16) character Inputs: Six Discrete 12-24V Optically Isolated with screw lug
Four-button keypad (Enter, Up, Down & Reset/Reverse) Terminals: Batch Reset, Manual Wrench Accept, Parameter Select
LED indicators: Cycle And Batch Status (OK/NOK) (3) and Disable. Four Dry Contact Relays with screw lug terminals
Serial Port: RS 232 port; RJ45 connector Outputs: Cycle Accept / Reject, Batch Accept / Reject
Standard Data Output: Torque (actual transducer reading), HI/LO Dry contact relays; up to 48 VDC and 7 amps
limits, Pulse Count, HI/LO limits, (Date/Time with DTU option) Dimensions: 21w x 35h x 16d cm (8.25w x 13.6h x 6.4d in)
Auxiliary Port : RJ45 connector for remote operator interface Weights: 3.5 kg (7.8 lb)
Operating Conditions: Power Source: Wall Mount Transformer to 16VAC, 50 Hz, 1 AMP
Humidity: 0 – 95% non condensing Air Supply: 50 scfm @ 6 bar pressure (87psi)
Temperature: 0 to +50 degrees Celsius
www.StanleyAssembly.com 080734
PSI - C Models and OptionsModel Number: PSI – C for Tranducer Pulse Tools Data Transfer Unit Option : P/N 24B100100
Model Number: PSI – C/68 for Direct Drive Tranducer � Adds Date/Time to Standard Date OutputAir Tools � Stores statistics, Date/Time, four parameter sets, 700 results
EtherNET Option: P/N 21B102702 per parameter set, for spreadsheet laptop analysis.Separate IP address with buffered memory for � Enables transfer of programming and data from one PSI – Casynchronous network communication. Supports controller to another in seconds
standard WINDOWS based TCP/IP(10baseT) Data Collection Transfer Kit Option (Used with Data Transfer Unit)
protocol; female RJ-45 connector Includes RJ-45 to USB cabling and PC software for DTU
PSI - C *Power Supply & Internal PrinterPSI-Q/US US 115V/60Hz PSI- Q/JP Japan 115V/50Hz
PSI- Q/EU Euro 230V/50Hz PSI- Q/AU Australia 240V/50Hz
PSI- Q/UK UK 230V/50Hz 24B100101 Internal Thermal Label Printer
* One required per PSI-C 2” X 4” Adhesive back labels
www.StanleyAssembly.com
Enable Error Proo ng of Threaded Fastening with all types of Pneumatic Tools
PSI-Quali ers improve assembly quality by enabling error proo ng to prevent missed fasteners or incomplete fastening cycles. Incomplete fastening cycles that are identi ed and alarmed include:
Rehits of a pre-tightened fastenerCross-thread of fasteners into mating threads Slip-off (or cam out) of the socket or screwdriver bit from the fastener head before fastening to nal torque.Short cycle (premature cycle abort) by the operator prior to fastening to nal torque.
Elimination of pressure feedback lines and tool porting reduces installation and maintenance cost.
•••
•
PSI-QFor
Shutoff Tools
Part ExitPart Entry
PSI-QcForNon-shutoffPulse Tools
PLC
Switch 1 Switch 2
Plant Air Plant Air
Incoming product for assembly resets the fastener count to zero from Switch 2An operator installs the fasteners with a pneumatic assembly tool. The PSI-Quali er determines complete versus incomplete assembly cycles. The quali er displays a green light for each complete assembly cycle. Red lights are illuminated and an alarm sounds for incomplete cycles from double hits, cross threads, strip outs or short cycles.
1.
2.
The PSI-Quali er increments the fastener count for each fastener installed with a complete cycle. When all of the required fasteners are assembled with completed cycles, the green batch OK light illuminates. If any fasten-ers have incomplete assembly cycles, the red NOK light illuminates and the alarm sounds. A 24V signal from the PSI-Quali er can be used to prevent products moving out of station (Switch 2) before all fasteners have complete assembly cycles.
3.Bolt Counting Enables Error Proo ng with Pneumatic Tools and PSI-Q and Qc
PSI-Qc Adds Shutoff to Non-shutoff Pneumatic ToolsThe PSI-Qc monitors each fastening cycle and uses a solenoid valve to shutoff the tool at the end of the cycle. Incomplete cycles are detected and alarmed.
PSI-Q Monitors Shutoff Pneumatic ToolsThe PSI-Q monitors each fastening cycle to detect incomplete cycles and report complete cycles.
PSI-Q and PSI-Qc QUALIFIERS
35
User supplies PLC and switches.
Optional Red/Green Hose Lights Show Cycle Status.
PSIQ 0506
Simple menu driven programming; no laptop needed.Learn mode records normal cycle and rehit joint signaturesResults display includes target torque, parameter set, bolt count, and OK/NOKProgramming options include torque units, parameter setup, bolt count, target torque, and transducer scale.Counts as many as 99 rundowns with OK / NOK evaluation for error proo ng.COUNT STATUS lights indicate total number of rundowns and rundowns “OK”. Batch “OK” outputs and resets the count and indicator lights.Discrete I/O for tie-in to local station controller, light tower or PLC.Ethernet and RS232 serial options for networking.
••
•
•
•
•
•
•
PSI Bene ts/Features
Up/Down keys scroll menu
Flow sensor connector
Hose light connector PSI displays
programming options and assembly results
Green cycle and batch OK and Red cycle and batch NOK LED’s
EthernetRS232 Connector
PSI-Q Speci cationsPower Source 100-240 VAC 50-60 HzPower Consumption < 1 amp @ 115 VACOperating Conditions Temperature Humidity
0 to +50 ºC (32 to 122 ºF)0 to 95 % non-condensing
Weight 1 kg. (2 lbs.) Approximately
Dimensions 15cm (6”) wide x 21cm (8.25”) high x 4cm (1.5”) deep
Inputs/Outputs Opto-isolated and relay dry contacts; accepts up to 24 VDC/5 amps with screw lug terminals
Error Proo ng OK/NOK for acceptable cycles vs REHIT/CROSS THREAD, STRIP/SLIP OFF, CYCLE ABORT & BATCH COUNT STATUS
Optional Serial Port RS 232 port; standard DB connector (date/time/Pset#/TgTq/TQ/COUNT/OK-NOK)
User InterfaceTwo Line 11mm (0.44”) LCD backlit, (16) Charactersper line; Five-button keypad(Up, Down, Menu, Reset/Reverse & Admin)
www.StanleyAssembly.com
PSI-Q and PSI-Qc QUALIFIERS
36
Components to Modify Stanley Pneumatic Shutoff Tools for Venting Stanley Tool Model New Component RequiredA32/33_CT & F32/33_CT 20H207500 Throttle Pin A30_TA/TP & F30_TA/TP 20H207400 Throttle Pin A40_TA/TP & F40_TA/TP 20H207300 Throttle Pin
Power Supply*PSI-Q/US US 115V/60HzPSI-Q/EU Euro 230V/50HzPSI-Q/UK UK 230V/50HzPSI-Q/JP Japan 115V/50HzPSI-Q/AU Australia 240V/50Hz
*Select one per qualifi er.
Optional Red/Green Hose Light Assemblies
21C200605 8’ straight 1/4”21C200604 16’ straight 1/4”21C200603 25’ straight 1/4”24C200000 8’ straight 3/8”24C200001 16’ straight 3/8”21C200602 25’ straight 3/8”
The PSI develops a rundown signature from a series of mass air ow measurements to detect OK vs. NOK fastening cycles.
1 2 3 4
Flow
Time