Assa Abloy - 45115 Access 800 NE1...ASSA ABLOY reserves the right to review Approved Reseller’s...

Effective January 1, 2014

Intelligent Power over Ethernet (PoE) Access Control

Price List

FOR TRAININ

G PURPOSES O

NLY

DATED MATERIA

L

Price List. 2 January 1, 2014

Trademark Use Policy: ASSA ABLOY AmericasThe following policy (“Policy”) of ASSA ABLOY Americas (“ASSA ABLOY”), and all of its affiliated group companies (collectively, the “GroupCompanies”), applies to the use of certain intellectual property of all such Group Companies, including all trademarks, names, logos, productimages, and related information (the “ASSA ABLOY Marks”). ASSA ABLOY Marks are proprietary and critical to the success of ASSA ABLOYand the Group Companies, and may only be used in strict compliance with this Policy.

This Policy covers any person or entity reselling any product of any Group Company with the consent of such Group Company (each,an “Approved Reseller”). Each Approved Reseller has a non-exclusive right to use certain of the ASSA ABLOY Marks relating to any ofthe Group Companies for which it is an Approved Reseller, subject to the following conditions:

(1) Approved Reseller’s use of ASSA ABLOY Marks must be truthful, fair, and not misleading;

(2) Approved Reseller’s advertising must clearly indicate that it is advertising of the Approved Reseller, and is not advertising of ASSA ABLOY;

(3) Approved Reseller may not use any ASSA ABLOY Marks as part of or in connection with a domain name;

(4) Approved Reseller’s advertising must not imply or suggest an association between the Approved Reseller and ASSA ABLOY other thanthat of buyer and seller;

(5) Approved Reseller’s use of ASSA ABLOY Marks must be a positive representation of ASSA ABLOY, the Group Companies, andtheir products;

(6) Approved Reseller’s trade name must be more predominant on Approved Reseller’s advertising than the ASSA ABLOY Marks;

(7) Approved Reseller’s use of ASSA ABLOY Marks must include the trademark symbol ® or TM, as appropriate, along with the followingtrademark legend printed in legible text on the Web page or document containing ASSA ABLOY Marks: “[describe ASSA ABLOY Marks]are trademarks or registered trademarks of ASSA ABLOY, Inc. or one of its affiliates in the United States and other countries.”;

(8) Approved Reseller must not make modifications of any ASSA ABLOY Marks; and

(9) Approved Reseller may use only ASSA ABLOY Marks associated with the Group Companies for which it is an Approved Reseller (e.g.,an Approved Reseller that sells Group Company X products but not Group Company Y products may use Group Company X trademarksin connection with its sale of Group Company X products, but may not use Group Company Y trademarks).

ASSA ABLOY reserves the right to review Approved Reseller’s usage of ASSA ABLOY Marks at any time and may:

(a) require changes to the use of ASSA ABLOY Marks at any time in its sole discretion, which changes must be implemented within30 days of written notice to Approved Reseller;

(b) condition the use of ASSA ABLOY Marks on ASSA ABLOY’s prior approval of such use, which approval may be withheld in itssole discretion;

(c) revoke permission to use ASSA ABLOY Marks at any time for any or no reason upon 30 days prior written notice to Approved Reseller; and

(d) revoke permission to use ASSA ABLOY Marks immediately upon notice to Approved Reseller in the event Approved Reseller is in violation ofthis Policy, or of any other agreement with ASSA ABLOY or any Group Company. Approved Reseller’s right to use ASSA ABLOY Marksin no way conveys to

Approved Reseller's right to use ASSA ABLOY Marks in no way conveys to Approved Reseller any proprietary or economic interest in anyASSA ABLOY Marks.

Approved Reseller any proprietary or economic interest in any ASSA ABLOY Marks.

Use of ASSA ABLOY Marks in violation of this Policy may result in severe civil and criminal liabilities. ASSA ABLOY will vigorously enforce thisPolicy by seeking all appropriate legal remedies, including, but not limited to, pecuniary damages and injunctive relief.

If there are any questions on this policy, please contact Linda Dean at [email protected] or 203-498-5596.

Copyrig

ht©2014

CorbinRu

sswin,Inc.

FOR TRAININ

G PURPOSES O

NLY

DATED MATERIA

L


SECTION PAGES

Tools and Rules 4

Terms and Conditions 6

Mortise Lock ML20800 IP1 Series 8

Cylindrical Lock CL33800 IP1 Series 14

Exit Device ED5000N x 9800 IP1 Series 18

Accessories 30

Table of Contents

Copyrig

ht©2014

CorbinRu

sswin,Inc.

FOR TRAININ

G PURPOSES O

NLY

DATED MATERIA

L

Tools and Rules


Service Center Business Hours

ASSA ABLOY Door Security Solutions®

Customer Service – Monroe 8:00 a.m. – 4:30 p.m. (Eastern)1902 Airport RoadMonroe, NC 2811Telephone Number: (800) 543-3658Fax Number: (800) 447-6714

Technical Product Support 8:00 a.m. - 4:30 p.m. (Eastern)225 Episcopal RoadBerlin, CT 06037Telephone Number: (888) 607-5703Fax Number: (800) 659-7293

Technical Electrified Product Support 8:00 a.m. - 4:30 p.m. (Eastern)Telephone Number: (800) 810-WIRE (9473)Fax Number: (203) 603-5981

Ordering Tips

• Order Forms are included in this Price Book and at www.corbinrusswin.com.• We recommend using the Order Form included with this Price Book when placing purchase orders for Corbin Russwin products.

The Order Form is available for copying prior to placing your order.• Please include Job Name and Registry Number for all contract orders.• Be sure to include Voltage on all Electrified Hardware orders.• A Letter of Authorization is required for all Patented Keyways.• Keyed Lead Sheets A and B are recommended for contract orders that are keyed to existing Master Key systems.• Remember to include Keysets on all contract orders.• Be sure to include Handing for all mortise locks and exit devices.• If you have a Quote, please include it with the purchase order. Orders without this information may be delayed.

Copyrig

ht©2014

CorbinRu

sswin,Inc.

FOR TRAININ

G PURPOSES O

NLY

DATED MATERIA

L


Tools and Rules

Ordering Tip — Administrative Documentation

When submitting purchase orders to ASSA ABLOY Door Security Solutions® Consultants for processing, please remember that certaincylinder types and/or keyways require additional administrative documentation before the order can be entered.

Purchase orders will be held and questioned if the following keyway/cylinder types do not have the proper administrative documentationsubmitted with each purchase order:

• Patented keyway products• Security cylinders and keys• High security cylinders and keys

All of the above product types must be accompanied by additional administrative documents unless they are shipping direct to the end userfacility. These administrative documents include, but may not be limited to, the following:

• Letter of Authorization – must be submitted on the end user facility letterhead, dated and signed by an authorized individual from thefacility. Letter must be quantity specific for certain product types. ASSA ABLOY Door Security Solutions Consultants does not keep lettersof authorization on file.

• Registration Certificate – only required for Pyramid systems.

Ordering Checklist

Before placing your order, check for the following:

� Purchase Order on company letterhead

� Purchase Order is legible

�Purchase Order Number

� Account Number

� Ship To Address

� Contact Person for additional information requirements

� Pricing Requirements – Buying Program or CPQ (please attach)

� Quick Ship Order (Quick Ship Order Form or Quick Ship part numbers included)

� Contract Order (Keyed Lead Sheets attached)

� Handing (if applicable)

� Design (if applicable)

� Backset & Strike (if applicable)

� Finish (if applicable)

Copyrig

ht©2014

CorbinRu

sswin,Inc.

FOR TRAININ

G PURPOSES O

NLY

DATED MATERIA

L

The products in this price book are bound by the full terms and conditions as documented in the main Corbin Russwinprice book.

PRODUCT MODIFICATIONSCorbin Russwin products are not designed or intended for aftermarket modification. The warranty on Corbin Russwin products becomes voidif the product is modified in any way, regardless of whether the modification causes or contributes to any alleged defect. Warranty voidingmodifications include, but are not limited to, third-party electrification of non-electric products and/or the installation of non-approved ornon-Corbin Russwin components. If a Corbin Russwin product is modified it no longer meets industry certification and quality controlstandards applicable to the original product and is no longer a genuine Corbin Russwin product. A modified product may not be sold asa Corbin Russwin product and the Corbin Russwin and Design® trademark or certification marks based on the original Corbin Russwinproduct, such as U.L. or ANSI/BHMA marks, may not appear anywhere on the modified product or on any packaging, literature, orinstructions sold with the modified product.

All original Corbin Russwin packaging and literature carries the Corbin Russwin and Design® trademark and must be destroyed if the originalCorbin Russwin product is modified. Portions of the product that carry the Corbin Russwin and Design® trademark or certification mark mustbe discarded and/or replaced by the party making the modification. U.L. and other certification testing and marking are also the responsibilityof the party making modification. The use of the Corbin Russwin and Design® trademark on modified products constitutes trademark infringement.

Fire Rated OpeningsAny retrofit or other field modification to a fire rated opening can potentially impact the fire rating of the opening, and Corbin Russwin, Inc.makes no representations or warranties concerning what such impact may be in any specific situation. When retrofitting any portion of anexisting fire-rated opening, or specifying and installing a new fire-rated opening,please consult with a code specialist or local code official(Authority Having Jurisdiction) to ensure compliance with all applicable codes and ratings.

Limited WarrantyCorbin Russwin, Inc. (Company) warrants that its products sold under the Corbin Russwin and Design® trade name in the United States ofAmerica are free from defects in workmanship and materials under normal use and service. This warranty does not cover defects or damagearising from improper installation, lack of or improper maintenance, improper storage, shipping and handling, corrosion, erosion, ordinarywear and tear, misuse, abuse, accident, unauthorized service, or use with unauthorized non-Corbin Russwin products or parts. This warrantyis void if any modification is made to the warranty product, regardless of whether the modification causes or contributes to the alleged defect.All modifications are made at the risk of the party making the modification. The only liability of the Company in tort or contract whether underthis warranty or otherwise shall be limited to the repair or replacement of any product or component part which shall prove defective ascovered by this warranty, within the stated time frame listed below, after delivery to the original purchaser.

Access 800® CL33600 Cylindrical locks ...........................7 yrs (mechanical), 2 yrs (electrical)Access 800 ML20600 Mortise locks ................................10 yrs (mechanical), 2 yrs (electrical)Access 800 ED5000N x 9600 Exit Devices .......................5 yrs (mechanical), 2 yrs (electrical)Pyramid Cylinders............................................................5 yearsInfini-T® Finish.................................................................LifetimeMicroShield® Finish .........................................................1 yearAll Other Corbin Russwin Products ..................................1 year

Finishes:Corbin Russwin finishes are covered by a limited warranty period of one year after invoice date. Infini-T® finish is warranted againstcorrosion and tarnishing for lifetime of the product.

Warranty Requirements for Cylinders Factory or Field Combinated:Cylinders are lubricated at the factory with a petroleum based lubricant (Medeco KeyLube). Cylinders should be lubricated periodicallydepending upon environmental conditions. Petroleum based lubricant is recommended. Never mix petroleum based lubricants withdry lubricants.

Warranty Requirements for Cylinders Field Combinated:1. Keys shall be cut to the Corbin Russwin key bitting specifications required for the particular keyway and depth system.2. All pin lengths shall be selected according to prevailing factory standards.3. Original Corbin Russwin cylinders and cylinder components, including pin tumblers and key blanks, shall be used. We reserve the right to void

the warranty if we deem that a malfunction is a result of non-original components which do not conform to Corbin Russwin standards.

Terms and Conditions


Copyrig

ht©2014

CorbinRu

sswin,Inc.

FOR TRAININ

G PURPOSES O

NLY

DATED MATERIA

L


Terms and Conditions

Keying Systems:All bittings shall be originated or authorized by the Corbin Russwin Key Systems Department to be compatible with one another in aspecific type of cylinder (Pyramid, conventional, security, master ring, interchangeable core) and within a particular keying system. Allcomponents of electromagnetic products are covered by a limited warranty period of one year after invoice date thereof of the originalpurchaser from us. Product repair or replacement, or associated charges, will not be accepted under this warranty unless prior authorizationfrom Corbin Russwin has been given. Upon receipt of products returned for repair or replacement, we will determine whether productsqualify for repair or replacement under this warranty. If they do not, we will obtain authorization prior to proceeding. We have no liability topay any costs of repair performed by anyone other than qualified personnel authorized by Corbin Russwin prior to the work being done.

The Company will not pay for the cost of repair performed other than in accordance with this warranty. Written notice of a product orcomponent part believed to be defective as covered by this warranty should be sent to Corbin Russwin, Inc. 225 Episcopal Road, Berlin, CT06037, and should include your name and address, an identification of the product or component part and a brief description of the defect.Upon receipt of such notice, the Company will inform you where to ship such product or component part, shipping charges prepaid, forexamination and, in the event such examination reveals defect covered by this warranty, the product will be repaired or replaced.The Company reserves the right to replace discontinued product with an equivalent product as deemed by the Company.

THIS WARRANTY IS IN LIEU OF ALL OTHER EXPRESS WARRANTIES. TO THE EXTENT PERMITTED BY LAW, ALL IMPLIED WARRANTIES ARELIMITED TO THE DURATION OF THIS WARRANTY. CORBIN RUSSWIN, INC. SHALL NOT BE LIABLE FOR ANY INCIDENTAL OR CONSEQUENTIALDAMAGES. NO AGENT, SALES REPRESENTATIVE OR DEALER HAS THE AUTHORITY TO INCREASE OR ALTER THE OBLIGATIONS OF THISWARRANTY. SOME STATES DO NOT ALLOW LIMITATIONS ON HOW LONG AN IMPLIED WARRANTY LASTS OR THE EXCLUSION ORLIMITATION OF INCIDENTAL OR CONSEQUENTIAL DAMAGES, SO THE ABOVE LIMITATION OR EXCLUSIONS MAY NOT APPLY TO YOU.THIS WARRANTY GIVES YOU SPECIFIC LEGAL RIGHTS, AND YOU MAY ALSO HAVE OTHER RIGHTS WHICH VARY FROM STATE TO STATE.

RETURNED GOODS – ELECTROMECHANICALAll defective replacement requests for electromechanical products/components must be authorized by contacting the ElectromechanicalApplications Team at 1-800-810-WIRE to obtain a case number. In order to receive credit for the replacement of an electromechanicalproduct the following criteria needs to be met:• Defective product return must be under warranty• Defective product/component return must arrive at factory within 60 days of the Returned Goods Authorization issuance• Returned product must be found defective or nonfunctional upon test at factory• Returned product must not have been damaged during installation process

Copyrig

ht©2014

CorbinRu

sswin,Inc.

FOR TRAININ

G PURPOSES O

NLY

DATED MATERIA

L

Intelligent PoE Access ControlMortise Lockset ML20800 IP1 Series


Features• Motorized mortise lock

• 125 kHz prox version (M802)

• 13.56 MHz iCLASS® version (M812)

• 125 kHz prox and keypad version (M803)

• 13.56 MHz iCLASS and keypad version (M813)

Monitoring Features• Latchbolt and deadbolt monitoring

• Request to exit

• Door position monitoring

Handing• Handed; quick reversibility. The lockset can

be re-handed without disassembling thelock body

Door Thickness• 1-3/4" (44mm) standard

• Optional 2" (50mm) to 2-1/4" (57mm)

Backset• 2-3/4" (70mm)

Cylinder• 1000-138-A01, 6-pin, L4, keyed random,

furnished standard for 1-3/4" (44mm) door.Optional cylinders available.

Ordering Examples

QuantitySeries/Function

TechnologyCode

Trim Finish HandCredentialQuick Code

24 ML20833 TCIP1 LSZ 626 RHR M803

Stock Order


Technology CodeTrim Finish

HandCredentialQuick CodeOutside Inside Outside Inside

24 ML20836 TCIP1 LSZ CSZ 626 606 RHR M812

Split Trim/Split Finish Order

Quantity KeysetSeries/Function

TechnologyCode

Trim Finish HandDoorThickness

OptionalStrike

CredentialQuick Code

OptionalCylinder

Keying

24 AA1 ML20836 TCIP1 LSZ 626 RHR D214 SA200 M803 C7 VKC3

Contract/Detailed Order

Warranty

• 10-year limited mechanical

• 2-year limited electrical

Certification/Compliance ANSI• Meets A156.13, Grade 1 requirements

• Meets A117.1 Accessibility Code

• Meets A156.25 requirements

Copyrig

ht©2014

CorbinRu

sswin,Inc.

FOR TRAININ

G PURPOSES O

NLY

DATED MATERIA

L

Price List. 9 Revised – March 7, 2014


ASZ CSZ DSZ ESZ LSZ NSZ PSZ RSZ

Levers: ASZ, CSZ, DSZ, ESZ, LSZ, NSZ, PSZ, RSZ

ML20833 x TCIP1 x M802 NoDeadbolt

No Key Override1 $1,981.00 $2,139.00

ML20834 x TCIP1 x M802 With Key Override $2,047.00 $2,205.00

ML20835 x TCIP1 x M802 WithDeadbolt

No Key Override1 $1,995.00 $2,153.00



No Key Override1 $2,040.00 $2,198.00



No Key Override1 $2,054.00 $2,212.00



No Key Override1 $2,106.00 $2,264.00



No Key Override1 $2,120.00 $2,278.00



No Key Override1 $2,099.00 $2,257.00



No Key Override1 $2,113.00 $2,271.00


Finish Group 1 Finish Group 2

613E, 626 605, 606, 611, 612, 613, 613L, 618,619, 625, 629, 630, 722

Function Description

1. Outside escutcheon will not have cylinder hole cutout.

Copyrig

ht©2014

CorbinRu

sswin,Inc.

FOR TRAININ

G PURPOSES O

NLY

DATED MATERIA

L




No Key Override1 $1,981.00 $2,139.00



No Key Override1 $1,995.00 $2,153.00



No Key Override1 $2,040.00 $2,198.00



No Key Override1 $2,054.00 $2,212.00



No Key Override1 $2,106.00 $2,264.00



No Key Override1 $2,120.00 $2,278.00



No Key Override1 $2,099.00 $2,257.00



No Key Override1 $2,113.00 $2,271.00



613E, 626605, 606, 611, 612, 613, 613L, 618,

619, 625, 629, 630, 722


1. Outside escutcheon will not have cylinder hole cutout.

Levers: Muséo® & Vineyard™ Collection Levers:

104 106 108

112 113 114

119 121 122

115 117

125 126 127 128

131 132

124

130129

Frascati Merlot Tuscany Zinfandel

102 103

107 110 123

111

109

116

Copyrig

ht©2014

CorbinRu

sswin,Inc.

FOR TRAININ

G PURPOSES O

NLY

DATED MATERIA

L




No Key Override2 $2,291.00

ML20834 x TCIP1 x M802 With Key Override $2,357.00






















Finish Group 1

613E, 6291, 6301


25M 21M 21S 23M 21L 21W

1. Levers Only. Escutcheons are plated to match polished stainless steel (629) and satin stainless steel (630) finishes.2. Outside escutcheon will not have cylinder hole cutout.

Copyrig

ht©2014

CorbinRu

sswin,Inc.

FOR TRAININ

G PURPOSES O

NLY

DATED MATERIA

L



Description Specify Quick Code Add or Deduct

Conventional 6-pin (standard) No ChargeConventional 7-pin 7P Add $2.00 per cylinderLess Standard Cylinder LC Deduct $69.00 per cylinderPyramid Security Fixed Core PS Add $40.00 per cylinderPyramid Security IC PCS Add $99.00 per cylinderPyramid High Security Fixed Core PHS Add $63.00 per cylinderPyramid High Security IC PCHS Add $121.00 per cylinderPyramid IC with Temporary Construction Core CTP Add $59.00 per cylinderPyramid IC with Temporary Disposable Core CTPD No ChargePyramid IC Less Core CLP No ChargeSecurity HS Add $80.00 per cylinderSecurity IC CHS Add $141.00 per cylinderIC 6-pin C6 Add $59.00 per cylinderIC 6-pin with Temporary Construction Core (Red) CT6R Add $59.00 per cylinderIC 6-pin with Temporary Construction Core (Blue) CT6B Add $59.00 per cylinderIC 6-pin with Temporary Construction Core (Green) CT6G Add $59.00 per cylinderIC 6-pin with Temporary Disposable Core CT6D No ChargeIC 6-pin Less Core CL6 No ChargeIC 7-pin C7 Add $61.00 per cylinderIC 7-pin with Temporary Construction Core (Red) CT7R Add $61.00 per cylinderIC 7-pin with Temporary Construction Core (Blue) CT7B Add $61.00 per cylinderIC 7-pin with Temporary Construction Core (Green) CT7G Add $61.00 per cylinderIC 7-pin with Temporary Disposable Core CT7D Add $2.00 per cylinderIC 7-pin Less Core CL7 Add $2.00 per cylinderSFIC 6-pin with Less Core CLS6 No ChargeSFIC 7-pin with Less Core CLS7 Add $2.00 per cylinderIC 6-pin with SFIC disposable temporary core CT6SD No ChargeIC 7-pin with SFIC disposable temporary core CT7SD Add $2.00 per cylinder

Mortise Lockset ML20800 Series Cylinder OptionsFor Key Override function only

Description Specify Quick Code Add or Deduct0-Bitted with 2 blank keys (standard) No ChargeKeyed random KR No ChargeConstruction master keyed 1, 2 CMK Add $16.00 per cylinderMaster keyed (all cylinders except 8000, 8020, 8027 IC core) Specify Keyset Add $16.00 per cylinderMaster keyed Pyramid Specify Keyset Add $16.00 per cylinderMaster keyed Security (including IC cylinder and core) Specify Keyset Add $16.00 per cylinderMaster keyed (8000, 8020, 8027 IC core) Specify Keyset No ChargeMaster keyed to customer bittings or sample key Specify Keyset Add $16.00 per cylinderVisual key control (VKC)

- No Stamping VKC0 Add $4.30 per cylinder- Keys only VKC1 No Charge- Cylinders and Keys 3 VKC2 Add $8.00 per cylinder- Cylinders only 3 VKC3 Add $8.00 per cylinder

Concealed key control (CKC)- CKC cylinders with VKC keys CKC2 Add $8.00 per cylinder- CKC cylinders only 3 CKC3 Add $8.00 per cylinder

Mortise Lockset ML20800 Series Keying Options

*For key bows other than 10 and 90, specify “KB” + bow number as Quick Code, e.g. KB12.Notes:1. CMK Construction master keying charge is in addition to master keying charge.2. CMK Construction master keying is not available in Pyramid or Security series.3. VKC2, VKC3, CKC3 are not available in Pyramid or Security series.

For Key Override function only

Copyrig

ht©2014

CorbinRu

sswin,Inc.

FOR TRAININ

G PURPOSES O

NLY

DATED MATERIA

L



Lip LengthANSI Straight LipSpecify Quick Code

ANSI Curved LipSpecify Quick Code

Add or Deduct

7/8" SS078 N/A

No Charge1-1/8" (standard) N/A1-1/4" SS114 SA1141-3/8" SS138 SA1381-1/2" SS112 SA1121-3/4" SS134 SA134

Add $16.00 per lockset

2" SS200 SA2002-1/4" SS214 SA2142-1/2" SS212 SA2122-3/4" SS234 SS2343" SS300 SA300

Mortise Lockset ML20800 Series Strike Options

Door Thickness Specify Quick Code Add or Deduct

1-3/4" (standard) —No Charge2" D200

2-1/4" D214

Mortise Lockset ML20800 Door Thickness Options


Split designs and split finishes Outside Trim x Inside Trim Higher set price prevailsTorx® head screws M04 Add $22.00 per locksetANSI wrought strike box M17 No ChargeKnurling outside and inside M20 Add $132.00 per locksetKnurling outside only M21 Add $66.00 per locksetKnurling inside only M22 Add $66.00 per locksetAbrasive coat outside and inside M23 Add $82.00 per locksetAbrasive coat inside only M24 Add $41.00 per locksetAbrasive coat outside only M25 Add $41.00 per lockset

Mortise Lockset ML20800 Miscellaneous Options

Description Door Thickness Specify Quick Code Add or Deduct

Open Back Strike 1-3/4" SB134 Add $82.00 per locksetOpen Back Strike 2" SB200

Add $124.00 per locksetOpen Back Strike 2-1/4" SB214Rabbeted front and strike SR118 Add $86.00 per lockset

Copyrig

ht©2014

CorbinRu

sswin,Inc.

FOR TRAININ

G PURPOSES O

NLY

DATED MATERIA

L

Intelligent PoE Access ControlCylindrical Lockset CL33800 IP1 Series


Features• Motorized cylindrical lock




• 13.56 MHz iCLASS and keypad version (M813)

Monitoring Features• Request to exit monitoring standard (non-handed)

• Door position switch included to allow forfull monitoring

Handing• Specify Handing

Door Thickness

• 1-3/4" (44mm) to 2" (50mm) standard,2" (50mm) to 2-1/4" (57mm) optional

Lock Chassis• Steel, zinc dichromated for corrosion

resistance.

Backset• 2-3/4" (70mm) standard. Optional: 3-3/4" (95mm)

Cylinder• Brass, 6-pin, L4 keyway, 0-bitted standard

Key Override• Standard not available with non-key override.

Quantity KeysetSeries/Function

TechnologyCode

Trim Finish HandDoorThickness

BacksetOptionalStrike


OptionalCylinder

Keying

24 AA1 CL33834 TCIP1 NZZ 626 RHR D214 B334 SC114 M802 C6 VKC3

Ordering Examples


Technology CodeTrim Finish

HandCredentialQuick CodeOutside Inside Outside Inside

12 CL33834 TCIP1 NZZ AZZ 626 625 LH M812


TechnologyCode

Trim Finish HandCredentialQuick Code

100 CL33834 TCIP1 NZZ 626 RHR M803

Split Trim/Split Finish Order

Contract/Detailed Order

Stock Order

Warranty• 7-year limited mechanical;

• 2-year limited electrical.

Certification/Compliance• ANSI/BHMA

Meets A156.2 Grade 1 requirements.

Copyrig

ht©2014

CorbinRu

sswin,Inc.

FOR TRAININ

G PURPOSES O

NLY

DATED MATERIA

L



NZZ PZZ AZZ FZZ

Levers: AZZ, NZZ, PZZ

CL33834 x TCIP1 x M802

With Key Override

$1,887.00 $1,982.00

CL33834 x TCIP1 x M803 $1,946.00 $2,041.00

CL33834 x TCIP1 x M812 $2,005.00 $2,100.00

CL33834 x TCIP1 x M813 $2,074.00 $2,169.00


613E, 626605, 606, 611, 612, 613,613L, 618, 619, 625, 722


Copyrig

ht©2014

CorbinRu

sswin,Inc.

FOR TRAININ

G PURPOSES O

NLY

DATED MATERIA

L




Conventional 6-pin (standard) No ChargeConventional 7-pin 7P Add $2.00 per cylinderLess Standard Cylinder LC Deduct $62.00 per cylinderPyramid Security Fixed Core PS Add $40.00 per cylinderPyramid Security IC PCS Add $99.00 per cylinderPyramid High Security Fixed Core PHS Add $60.00 per cylinderPyramid High Security IC PCHS Add $121.00 per cylinderPyramid IC Less Core CLP No ChargeSecurity HS Add $82.00 per cylinderSecurity IC CHS Add $141.00 per cylinderIC 6-pin C6 Add $59.00 per cylinderIC 6-pin with Temporary Construction Core (Red) CT6R Add $59.00 per cylinderIC 6-pin with Temporary Construction Core (Blue) CT6B Add $59.00 per cylinderIC 6-pin with Temporary Construction Core (Green) CT6G Add $59.00 per cylinderIC 6-pin with Temporary Disposable Core CT6D No ChargeIC 6-pin Small Format Disposable Core CTSD No ChargeIC 6-pin Less Core CL6 No ChargeIC 7-pin C7 Add $61.00 per cylinderIC 7-pin with Temporary Construction Core (Red) CT7R Add $61.00 per cylinderIC 7-pin with Temporary Construction Core (Blue) CT7B Add $61.00 per cylinderIC 7-pin with Temporary Construction Core (Green) CT7G Add $61.00 per cylinderIC 7-pin with Temporary Disposable Core CT7D No ChargeIC 7-pin Less Core CL7 No ChargeLockset furnished in Schlage® C Keyway1 C No ChargeLockset furnished in SARGENT® LA Keyway2 LA No Charge

Description Specify Quick Code Add or Deduct0-Bitted with 2 blank keys (standard) No ChargeKeyed random KR No ChargeMaster keyed (all cylinders except 8000, 8020, 8027 IC core) Specify Keyset Add $16.00 per cylinderMaster keyed Pyramid Specify Keyset Add $16.00 per cylinderMaster keyed Security (including IC cylinder and core) Specify Keyset Add $16.00 per cylinderMaster keyed (8000, 8020, 8027 IC core) Specify Keyset No ChargeMaster keyed to customer bittings or sample key Specify Keyset Add $16.00 per cylinderConstruction master keyed 1, 2 CMK Add $16.00 per cylinderVisual key control (VKC)

- No Stamping VKC0 Add $4.30 per cylinder- Keys only VKC1 No Charge- Cylinders and Keys 3 VKC2 Add $8.00 per cylinder- Cylinders and Keys 3 VKC3 Add $8.00 per cylinder

Concealed key control (CKC)- CKC cylinders with VKC keys CKC2 Add $8.00 per cylinder- CKC cylinders only 3 CKC3 Add $8.00 per cylinder

Cylindrical Lockset CL33800 Series Keying Options

Cylindrical Lockset CL33800 Series Cylinder Options

Notes:1. CMK Construction master keying charge is in addition to master keying charge.2. CMK Construction master keying is not available in Pyramid or Security series.3. VKC2, VKC3, CKC3 are not available in Pyramid or Security series.

For Key Override Functions


Copyrig

ht©2014

CorbinRu

sswin,Inc.

FOR TRAININ

G PURPOSES O

NLY

DATED MATERIA

L


Intelligent PoE Access ControlCylindrical Lockset CL33800 PoE Series

Lip LengthANSI Straight LipSpecify Quick Code

ANSI Curved LipSpecify Quick Code

Add or Deduct

1" SA100 SC100

No Charge1-1/8" SA118 SC1181-1/4" (standard) SC1141-3/8" SA138 SC1381-1/2" SA112 SC1121-3/4" SA134 SC134

Add $16.00 per lockset

2" SA200 SC2002-1/4" SA214 SC2142-1/2" SA212 SC2122-3/4" SA234 SC2343" SA300 SC300Rabbeted front and strike SR118

Cylindrical Lockset CL33800 Strike Options


1-3/4" - 2" (standard)No Charge

2" - 2-1/4" D214

Cylindrical Lockset CL33800 Door Thickness Options


Split designs and split finishes Outside Trim x Inside Trim Higher set price prevailsTorx® head screws M04 Add $22.00 per locksetLess cylinder and with tailpiece for Schlage® cylinder 2 M06 No ChargeLever to accept Best-type core M08 No ChargeLever to accept Sargent® cylinder M09 No Charge1-1/8" latch front, rounded corners M13 Add 2.50 per latch3/4" (19mm) throw fire latch M16 Add $90.00 per locksetANSI wrought strike box M17 No ChargeKnurling outside and inside M20 Add $132.00 per locksetKnurling outside only M21 Add $66.00 per locksetKnurling inside only M22 Add $66.00 per locksetAbrasive coat outside and inside M23 Add $82.00 per locksetAbrasive coat inside only M24 Add $41.00 per locksetAbrasive coat outside only M25 Add $41.00 per locksetLever to accept Schlage® IC core M69 No Charge

Cylindrical Lockset CL33800 Miscellaneous Options


2-3/4" (standard) No Charge3-3/4" B334 Add $15.00 to lockset5" B500 Add $24.00 to lockset

Cylindrical Lockset CL33800 Backset Options

Copyrig

ht©2014

CorbinRu

sswin,Inc.

FOR TRAININ

G PURPOSES O

NLY

DATED MATERIA

L

Intelligent PoE Access ControlED5000N x 9800 IP1 Series


9800 IP1 Exit Trim Series9800 IP1: Rim & SecureBolt®

9M800 IP1: Mortise Exit

Features

• Motorized exit trim




• 13.56 MHz iCLASS and keypadversion (M813)

Monitoring Features

• Request to exit

• Door position switch included to allowfor full monitoring

Handing

• Device is non-handed. Lever trim is handed.Specify hand for exit x mortise functions

Lever Trim

• Free floating, to fit doors 1-3/4" (44mm)to 2-1/4"(7mm).

Hub

• Steel, 5/16" (8mm)

Projection

• 3-1/4" (83mm) active, 2-3/4"(70mm) dogged.

Strike

• Strike for ED5600N Mortise functions:Wrought brass, bronze or stainless steelANSI straight lip standard, 4-7/8"(124mm) x 1-1/4" (32mm) x 1-1/8"(29mm) lip to center. Optional strikes,lip lengths and ANSI wrought strikebox available.

Door Thickness

• 1-3/4" (44mm) standard.Optional: 2" (51mm); specify D200.Optional: 2-1/4" (57mm); specify D214.

Warranty

• 5-year limited mechanical

• 2-year limited electrical

ED5000N SeriesDevice includes monitoring features foruse with Access 800® IP1 trim· ED5200(S)(A)N Rim & SecureBolt®

· ED5600(A)LN Mortise Exit

Quantity Exit DeviceTrim/Function

TechnologyCode

Finish HandCylinderOption

DoorThickness

OptionalStrike

DoorWidth

Misc.Options


65 ED5600ALN FR9M833 TCIP1 605 LHR 6P D200 SB134 W048 M51-M54 M812

Ordering Examples

Quantity Trim/FunctionTechnologyCode

Finish HandCredentialQuick Code

24 N9834 TCIP1 625 RHR M802

Quantity FunctionTechnologyCode

Finish Hand

12 ED5200N TCIP1 626 LHR

Exit Device Only

Trim Only

Exit Device with Trim

Quantity Keyset Exit DeviceTrim/Function

TechnologyCode

Finish HandDoorWidth


CylinderOption

36 AA1 ED5200N 1149834 TCIP1 626 LHR W048 M803 7P

Contract/Detailed Order - Rim Exit Device with Trim

Copyrig

ht©2014

CorbinRu

sswin,Inc.

FOR TRAININ

G PURPOSES O

NLY

DATED MATERIA

L


Intelligent PoE Access ControlED5000N X 9800 IP1 Series

ED5000N SeriesDevice includes monitoring features for usewith Access 800® IP1 trim· ED5200(S)(A)N Rim & SecureBolt®

· ED5600(A)LN Mortise Exit x Lever Trim

SecureBolt® ED5200NS(A) Series

ED5200SN x TCIP1 Panic $1,427.00 $1,472.00ED5200SAN x TCIP1 3 Hour Fire Rated $1,590.00 $1,635.00

Rim 5200N Series(A)

ED5200N x TCIP1 Panic $1,359.00 $1,404.00ED5200AN x TCIP1 3 Hour Fire Rated $1,522.00 $1,567.00

Mortise ED5600N Series

ED5600LN x TCIP1 Panic $1,793.00 $1,838.00ED5600ALN x TCIP1 3 Hour Fire Rated $1,956.00 $2,001.00


613E, 630605, 606, 611, 612, 613, 613L, 618,

619, 625, 626, 629, 722


Copyrig

ht©2014

CorbinRu

sswin,Inc.

FOR TRAININ

G PURPOSES O

NLY

DATED MATERIA

L

ED5200SN SecureBolt® Rim Exit Device x 9800 Trim x M802

Intelligent WiFi Access ControlED5000N X 9800 WI1 Series



613E, 630605, 606, 611, 612, 613, 618,

619, 625, 626, 629, 722

ED5200SN x 9833 x TCIP1 x M802 No Key Override1

$2,893.00 $2,958.00ED5200SN x 9834 x TCIP1 x M802 With Key OverrideED5200SN x 9833 x TCIP1 x M812 No Key Override1


$3,088.00 $3,153.00ED5200SN x 9834 x TCIP1 x M813 With Key Override

ED5200SAN x 9833 x TCIP1 x M802 No Key Override1

$3,056.00 $3,121.00ED5200SAN x 9834 x TCIP1 x M802 With Key OverrideED5200SAN x 9833 x TCIP1 x M812 No Key Override1


$3,251.00 $3,316.00ED5200SAN x 9834 x TCIP1 x M813 With Key Override

ED5200SAN SecureBolt® Rim Exit Device 3-Hr Fire x 9800 Trim x M802

ED5200N x 9833 x TCIP1 x M802 No Key Override1

$2,825.00 $2,890.00ED5200N x 9834 x TCIP1 x M802 With Key OverrideED5200N x 9833 x TCIP1 x M812 No Key Override1


$3,020.00 $3,085.00ED5200N x 9834 x TCIP1 x M813 With Key Override

ED5200N Rim Exit Device x 9800 Trim x M802

ED5200AN x 9833 x TCIP1 x M802 No Key Override1

$2,988.00 $3,053.00ED5200AN x 9834 x TCIP1 x M802 With Key OverrideED5200AN x 9833 x TCIP1 x M812 No Key Override1


$3,183.00 $3,248.00ED5200AN x 9834 x TCIP1 x M813 With Key Override

ED5200AN Rim Exit Device 3-Hr Fire x 9800 Trim x M802

ED5600LN x 9M833 x TCIP1 x M802 No Key Override1

$3,051.00 $3,116.00ED5600LN x 9M834 x TCIP1 x M802 With Key OverrideED5600LN x 9M833 x TCIP1 x M812 No Key Override1


$3,246.00 $3,311.00ED5600LN x 9M834 x TCIP1 x M813 With Key Override

ED5600LN Mortise Exit Device x 9M800 Trim x M802

ED5600LAN x 9M833 x TCIP1 x M802 No Key Override1

$3,214.00 $3,279.00ED5600LAN x 9M834 x TCIP1 x M802 With Key OverrideED5600LAN x 9M833 x TCIP1 x M812 No Key Override1


$3,409.00 $3,474.00ED5600LAN x 9M834 x TCIP1 x M813 With Key Override

ED5600ALN Mortise Exit Device 3-Hr Fire x 9M800 Trim x M802

M803 Credential option; Keypad & Proximity Reader Add $68.00 to above pricing

A C D E L N PR R

1. Trim escutcheon will not have cylinder hole cutout

Copyrig

ht©2014

CorbinRu

sswin,Inc.

FOR TRAININ

G PURPOSES O

NLY

DATED MATERIA

L


Intelligent PoE Access ControlED5000N X 9800 IP1


613E, 630605, 606, 611, 612, 613, 613L,618, 619, 625, 626, 629, 722

ED5200SN x 9833 x TCIP1 x M802 No Key Override1



$3,088.00 $3,153.00ED5200SN x 9834 x TCIP1 x M813 With Key Override

ED5200SN SecureBolt® Rim Exit Device x 9800 Trim x M802

ED5200SAN x 9833 x TCIP1 x M802 No Key Override1



$3,251.00 $3,316.00ED5200SAN x 9834 x TCIP1 x M813 With Key Override

ED5200SAN SecureBolt® Rim Exit Device 3-Hr Fire x 9800 Trim x M802

ED5200N x 9833 x TCIP1 x M802 No Key Override1



$3,020.00 $3,085.00ED5200N x 9834 x TCIP1 x M813 With Key Override

ED5200N Rim Exit Device x 9800 Trim x M802

ED5200AN x 9833 x TCIP1 x M802 No Key Override1



$3,183.00 $3,248.00ED5200AN x 9834 x TCIP1 x M813 With Key Override

ED5200AN Rim Exit Device 3-Hr Fire x 9800 Trim x M802

ED5600LN x 9M833 x TCIP1 x M802 No Key Override1



$3,246.00 $3,311.00ED5600LN x 9M834 x TCIP1 x M813 With Key Override

ED5600LN Mortise Exit Device x 9M800 Trim x M802

ED5600LAN x 9M833 x TCIP1 x M802 No Key Override1



$3,409.00 $3,474.00ED5600LAN x 9M834 x TCIP1 x M813 With Key Override

ED5600ALN Mortise Exit Device 3-Hr Fire x 9M800 Trim x M802

M803 Credential option; Keypad & Proximity Reader Add $68.00 to above pricing


Copyrig

ht©2014

CorbinRu

sswin,Inc.

Muséo® & Vineyard™ Levers:

FOR TRAININ

G PURPOSES O

NLY

DATED MATERIA

L

Intelligent PoE Access ControlED5000N X 9800 IP1


A, C, D, E, L, N, PR, R For use with

9833 x TCIP1 x M8021 ED5200(A)N, ED5200S(A)Nx TCIP1 $1,466.00 $1,486.00

9834 x TCIP1 x M8029833 x TCIP1 x M8031 ED5200(A)N, ED5200S(A)N

x TCIP1 $1,536.00 $1,556.009834 x TCIP1 x M8039833 x TCIP1 x M8121 ED5200(A)N, ED5200S(A)N


x TCIP1 $1,661.00 $1,681.009834 x TCIP1 x M813


613E, 630605, 606, 611, 612, 613, 618, 619, 625,

626, 629, 722

9800 IP1 Trim only for use with:ED5200(S)(A)N x TCIP1 Rim, SecureBolt®

Pricing for access control and trim only.

Exit device sold separately


613E, 626605, 606, 611, 612, 613, 618, 619,

625, 629, 722




FR M TS Z

A C D E L N PR R


FR, M, TS, Z For use with





x TCIP1 $1,661.00 $1,681.009834 x TCIP1 x M813

Copyrig

ht©2014

CorbinRu

sswin,Inc.

FOR TRAININ

G PURPOSES O

NLY

DATED MATERIA

L





613E, 630605, 606, 611, 612, 613, 613L, 618,

619, 625, 626, 629, 722




Muséo® Levers For use with





x TCIP1 $1,661.00 $1,681.009834 x TCIP1 x M813

Copyrig

ht©2014

CorbinRu

sswin,Inc.

102 103 104

106 107 108

110 123

111 112 113 114

119 121 122

115 116 117

109

125 126 127 128

131 132

124

130129

FOR TRAININ

G PURPOSES O

NLY

DATED MATERIA

L

Intelligent PoE Access ControlED5600N X 9M800 IP1 Series


Finish Group 1

613E, 6291, 63019800 IP1 Trim only for use with: 6291, 6301ED5200(S)(A)N x TCIP1 Rim, SecureBolt®



25M 21M 21S 23M

21L 21W

1. Levers Only. Escutcheons are plated to match polished stainless steel (629) and satin stainless steel (630) finishes.2. Trim escutcheon will not have cylinder hole cutout


9833 x TCIP1 x M8022

ED5200(A)N, ED5200S(A)N x TCIP1 $1,638.009834 x TCIP1 x M8029833 x TCIP1 x M8032



ED5200(A)N, ED5200S(A)N x TCIP1 $1,833.009834 x TCIP1 x M813

Copyrig

ht©2014

CorbinRu

sswin,Inc.

FOR TRAININ

G PURPOSES O

NLY

DATED MATERIA

L

Price List. 25 Revised – March 2014



613E, 630605, 606, 611, 612, 613, 613L, 618,

619, 625, 626, 629, 722

9M800 IP1 Trim only for use with:ED5600(A)N x TCIP1 Mortise Exit Device




613, 626605, 606, 611, 612, 613, 613L,

618, 619, 625, 629, 722

9M800 IP1 Trim only for use with:ED5600(A)N x TCIP1 Mortise Exit Device



Function

FR M TS Z

A C D E L N PR R

A, C, D, E, L, N, PR, R For use with

9M833 x TCIP1 x M8021

ED5600(A)LN x TCIP1 $1,258.00 $1,278.009M834 x TCIP1 x M8029M833 x TCIP1 x M8031

ED5600(A)N x TCIP1 $1,328.00 $1,348.009M834 x TCIP1 x M8039M833 x TCIP1 x M8121


ED5600(A)N x TCIP1 $1,453.00 $1,473.009M834 x TCIP1 x M813

Function

FR, M, TS, Z For use with

9M833 x TCIP1 x M8021






Copyrig

ht©2014

CorbinRu

sswin,Inc.

FOR TRAININ

G PURPOSES O

NLY

DATED MATERIA

L



102 103 104

106 107 108

110 123

111 112 113 114

119 121 122

115 116 117


613E, 630605, 606, 611, 612, 613, 618,

619, 625, 626, 629, 7229M800 IP1 Trim only for use with:ED5600(A)N x TCIP1 Mortise Exit Device

Pricing for access control and trim only.Exit device sold separately

109

Function



9M833 x TCIP1 x M8021





Copyrig

ht©2014

CorbinRu

sswin,Inc.

125 126 127 128

131 132

124

130129

FOR TRAININ

G PURPOSES O

NLY

DATED MATERIA

L



Finish Group 1

613E, 6291, 63019M800 IP1 Trim only for use with:ED5600(A)N x TCIP1 Mortise Exit Device

Pricing for access control and trim only.Exit device sold separately

Mechanical Exit Device Retrofit Kit*For use with mechanical ED5000 Series x 9800/9M800 series access control trim

Part Number Description List Price

716F129Touch Bar Monitoring kit for ED5000[up to 48" device]

$208.00

*Note:Retrofit kit equips mechanical exit device with touch bar monitoring and serves as request to exit (REX) output.

Kit Includes:• Touch Bar Monitor/ REX assembly• Harness from REX switch to Access 800® IP1 Controller• Trim Slide Retainer/ Screw• Trim Slide Wire Bracket• Wire Grommet• Installation Instructions

25M 21M 21S 23M

21L 21W

Function

1. Levers Only. Escutcheons are plated to match polished stainless steel (629) and satin stainless steel (630) finishes.2. Trim escutcheon will not have cylinder hole cutout


9M833 x TCIP1 x M8022

ED5600(A)LN x TCIP1 $1,430.009M834 x TCIP1 x M8029M833 x TCIP1 x M8032

ED5600(A)N x TCIP1 $1,500.009M834 x TCIP1 x M8039M833 x TCIP1 x M8122

ED5600(A)LN x TCIP1 $1,555.009M834 x TCIP1 x M8129M833 x TCIP1 x M8132

ED5600(A)N x TCIP1 $1,625.009M834 x TCIP1 x M813

Copyrig

ht©2014

CorbinRu

sswin,Inc.

FOR TRAININ

G PURPOSES O

NLY

DATED MATERIA

L



Description Specify Quick Code Add or Deduct0-Bitted with 2 blank keys (standard) No ChargeKeyed random KR No ChargeConstruction master keyed (1, 2) CMK Add $16.00 per cylinderVisual key control (VKC)

- No Stamping VKC0 Add $4.30 per cylinder- Keys only VKC1 No Charge- Cylinders and Keys (3) VKC2 Add $8.00 per cylinder- Cylinders only (3) VKC3 Add $8.00 per cylinder

Concealed key control (CKC)- CKC cylinders with VKC keys CKC2 Add $8.00 per cylinder- CKC cylinders only (3) CKC3 Add $8.00 per cylinder

ED5000N x 9800 IP1 Exit Device Series Cylinder Options

Notes:1. CMK Construction master keying charge is in addition to master keying charge.2. CMK Construction master keying is not available in Pyramid or Security series.3. VKC2, VKC3, CKC3 are not available in Pyramid or Security series.



Door Width Specify Quick Code Add or Deduct24" W024 Add $292.00 per device36" (standard) No Charge48" W048 Add $35.00 per device

Door Width Specify Quick Code Add or Deduct1-3/4" (standard)

No Charge2" D2002-1/4" D214

ED5000N x 9800 IP1 Exit Device Series Door Width Options

ED5000N x 9800 IP1 Exit Device Series Door Thickness Options

Description Specify Quick Code Add or DeductConventional 6-pin 6P Add $69.00 per cylinderConventional 7-pin 7P Add $71.00 per cylinderPyramid Security fixed core PS Add $109.00 per cylinderPyramid Security IC PCS Add $168.00 per cylinderPyramid High Security fixed core PHS Add $132.00 per cylinderPyramid High Security IC PCHS Add $190.00 per cylinderPyramid IC with temporary construction core CTP Add $128.00 per cylinderPyramid IC with temporary disposable core CTPD Add $69.00 per cylinderPyramid IC less core CLP Add $69.00 per cylinderSecurity HS Add $149.00 per cylinderSecurity IC CHS Add $210.00 per cylinderBlockout function BO Add $161.00 per cylinderIC 6-pin C6 Add $128.00 per cylinderIC 6-pin with temporary construction core (Red) CT6R Add $128.00 per cylinderIC 6-pin with temporary construction core (Blue) CT6B Add $128.00 per cylinderIC 6-pin with temporary construction core (Green) CT6G Add $128.00 per cylinderIC 6-pin with temporary disposable core CT6D Add $69.00 per cylinderIC 6-pin less core CL6 Add $69.00 per cylinderIIC 7-pin C7 Add $132.00 per cylinderIC 7-pin with temporary construction core (Red) CT7R Add $132.00 per cylinderIC 7-pin with temporary construction core (Blue) CT7B Add $132.00 per cylinderIC 7-pin with temporary construction core (Green) CT7G Add $132.00 per cylinderIC 7-pin with temporary disposable core CT7D Add $71.00 per cylinderIC 7-pin less core CL7 Add $71.00 per cylinderSFIC 6-pin with Less Core CLS6 Add $71.00 per cylinderSFIC 7-pin with Less Core CLS7 Add $71.00 per cylinderIC 6-pin with SFIC disposable temporary core CT6SD Add $69.00 per cylinderIC 7-pin with SFIC disposable temporary core CT7SD Add $71.00 per cylinder

ED5000N x 9800 IP1 Exit Device Series Keying Options

Copyrig

ht©2014

CorbinRu

sswin,Inc.

FOR TRAININ

G PURPOSES O

NLY

DATED MATERIA

L



Description Specify Quick Code Add or DeductFlush transom top strike bracket M67 Add $29.00 per device

Mortise Device-ANSI wrought strike box

M17 No Charge

-ANSI strike for pair of doors w/astragal (7/8" L to C) SS078 No Charge-Open back strike for 1-3/4" door SB134 Add $76.00 per device-Open back strike for 2-1/4" door SB214 Add $115.00 per device

ED5000N x 9800 IP1 Exit Device Series Strike Options

Model Height Size Wall -- Mat'l Lockable Fire Rated Price907 7'

2" x 3"

0.125" Steel

— — $530.00908 8' — — $540.00907A 7' — 3 hr $738.00908A 8' — 3 hr $748.00910 10' — — $640.00907BKM 7'

0.250" Steel

yes 90 min $1,066.00908BKM 8' yes 90 min $1,076.00910KM 10' yes — $1,004.00FE707A 7' — 3 hr $920.00FE708A 8' — 3 hr $930.00WS707AKM 7' yes 3 hr $1,290.00WS708AKM 8' yes 3 hr $1,300.00

ED5000N x 9800 IP1 Exit Device Mullions

Catalog Number Description Quick Codes Add or Deduct

1000-118-A62 6-pin 6P Add $69.00 per cylinder mullion1000-114-A62-7 7-pin 7P Add $69.00 per cylinder mullion1080-114-A62 6-pin, IC C6 Add $128.00 per cylinder mullion1080-112-A62-7 7-pin, IC C7 Add $132.00 per cylinder mullion1020-114-A62 Pyramid High Security PHS Add $132.00 per cylinder mullion1027-114-A62 Pyramid Security PS Add $109.00 per cylinder mullion1030-114-A62 Pyramid High Security IC PCHS Add $190.00 per cylinder mullion1037-114-A62 Pyramid Security IC PCS Add $168.00 per cylinder mullion1010-118-A62 Security HS Add $149.00 per cylinder mullion1090-114-A62 Security IC CHS Add $210.00 per cylinder mullion1070-114-A62 6-pin, IC, less core CL6 Add $69.00 per cylinder mullion1070-112-A62-7 7-pin, IC, less core CL7 Add $71.00 per cylinder mullion

Mullion Cylinders

Mullion Series 1-1/4" 1-1/2" IC

Windstorm Key RemovableWS707A KMWS708A KM

610F01* 609F36*

Key Removable907B KM908B KM910 KM

447F43* 609F37*

Note:Cylinder Collar Packets contain a Collar & Spring Washer.* Specify finish when ordering packets.

Cylinder Collar Packet Chart

Copyrig

ht©2014

CorbinRu

sswin,Inc.

FOR TRAININ

G PURPOSES O

NLY

DATED MATERIA

L


Miscellaneous Options

Description Specify Quick Code Add or DeductTorx® Head Screws M04 Add $42.00 per deviceANSI wrought strike box (mortise) M17 No ChargeKnurling outside & inside (embossed touchbar - device side)1 M20 Add $139.00 per deviceKnurling outside only (trim side)1 M21 Add $65.00 per deviceKnurling inside only (embossed touchbar - device side) M22 Add $74.00 per deviceAbrasive coat outside and inside (trim and device) M23 Add $88.00 per deviceAbrasive coat inside only (device side) M24 Add $46.00 per deviceAbrasive coat outside only (trim side)1 M25 Add $42.00 per deviceLess dogging M51 No ChargeCylinder dogging M52 Add $49.00 per deviceSex nuts and bolts (SNBs) M54 No ChargeShim kit (for vision light) M58 Add $72.00 per deviceWood screws for use on fire-rated solid wood or wood core doors M64 No Charge

1. Not available with Vineyard™ or Muséo® levers.

Intelligent IP1 Access ControlAccessories

*Sold only in multiples of the number indicated.Note: For HID credentials, site/facility code and card sequence numbers must be specified.

Credentials

Description Specify Quick Code Order Multiples* Order Minimums Price (Each)

C/R 26 bit ISO Prox II with logo 794F319 Order 25- 25

$14.20C/R 26 bit ISO Prox II blank 794F329 Order 25- 100HID® 26 bit ISO Prox II with logo 794F359 Order 25- 100HID 26 bit ISO Prox II without logo 794F369 Order 25- 100C/R 26 bit ProxCard® II with logo 794F339 Order 25- 25

$7.00C/R 26 bit ProxCard II blank 794F349 Order 25- 100HID 26 bit ProxCard II with logo 794F379 Order 25- 100HID 26 bit ProxCard II without logo 794F389 Order 25- 100C/R DuoProx II - Prox and mag stripe with logo 794F399 Order 100- 100

$14.70C/R DuoProx II - Prox and mag stripe without logo 794F409 Order 100- 100HID 26 bit DuoProx II - Prox and mag stripe 794F419 Order 100- 100C/R MicroProx tag 794F429 Order 10- 100

$8.30HID MicroProx tag with customer site code 794F449 Order 10- 100C/R 26 bit ProxKey III 794F439 Order 10- 100

$10.80HID 26 bit ProxKey III 794F459 Order 10- 100

Hardware

Description Specify Quick Code Price (Each)

Conduit 708F979 $11.30Plug in wall transformer 793F049 $49.00Ribbon Cable 793F029 $29.00Adapter Cable 712F859 $27.00Door Position Switch (DPS) 712F869 $15.00

Copyrig

ht©2014

CorbinRu

sswin,Inc.

FOR TRAININ

G PURPOSES O

NLY

DATED MATERIA

L

Price List. 31 Revised – March 2014

Intelligent PoE Access ControlAccessories

Gaskets

Description Specify Price (Each)

Exit device - Keypad 794F509 $8.10Exit device trim 794F519 $8.10Cylindrical lock 794F529 $10.50Mortise lock 794F539 $10.50

Accessories

Description Specify Price (Each)

Network & Lock Configuration CD Tool Kit* WFCD1 $106.00Lock Management Tool (LMT) CD* WFCD2 $1,140.00

WFCD3 $3,000.00Data Hinge Tester DHTA $140.00

*Both the Network and Lock Configuration CD Tool Kit (WFCD1) and the Lock Management Tool (WFCD2) are required to set upAccess 800 IP1 locks. Only one of each is required per system.

Weatherseal Gasketing KitNote: Gasket and conduit are packed standard with lockset.

• Includes rubber gasket(s) and durable ABS conduit• Gaskets provide sealing between escutcheons and

door for exterior applications

• Conduit provides weather protection inside of door

• Gasketing and conduit for use on non-firerated exterior applications only

• To order separately, specify kit part number

MortiseEscutcheon

CylindricalEscutcheon

Exit TrimEscutcheon

Conduit

Exit KeypadEscutcheon

Access 800® Product Kit Part Number Price

ML20800 Series Mortise Lock 794F929 $33.00

CL33800 Series Cylindrical Lock 794F919 $33.00

9800/9M800 Series Exit Trim 794F909 $46.00Co

pyrig

ht©2014

CorbinRu

sswin,Inc.

FOR TRAININ

G PURPOSES O

NLY

DATED MATERIA

L

45274-1/14

For more information regarding Corbin Russwin Locksets,Exit Devices, Door Controls and Key Systems, contact yourauthorized Corbin Russwin Distributor or Sales Representative.

Corbin Russwin Architectural Hardware225 Episcopal RoadBerlin, CT 06037

Phone 800-543-3658Fax 800-447-6714

www.corbinrusswin.com

Notice: This price book takes precedence over the catalog as tothe correctness and availability of items in our entire line.

Corbin Russwin and Design®, Infini-T®, Access 800®, Museo®, and SecureBolt® are registered trademarks of Corbin Russwin, Inc, an ASSA ABLOY Group company.VineyardTM is a trademark of Corbin Russwin, Inc, an ASSA ABLOY Group company. Other products' brand names

may be trademarks or registered trademarks of their respective owners and are mentioned for reference purposes only. These materials are protected underUS copyright laws. All contents current at time of publication. Corbin Russwin Inc., an ASSA ABLOY Group company reserves the right to change availability

of any item in this catalog, its design, construction, and/or its materials.

HID® and iCLASS® are registered trademarks of HID Global in the U.S. and/or other countries.

Copyright © 2014 Corbin Russwin, Inc, an ASSA ABLOY Group company. All rights reserved.Reproduction in whole or in part without the express written permission of Corbin Russwin, Inc. is prohibited.

MicroShield®As part of their promise to provide innovative solutions to their customers,

certain ASSA ABLOY Group brands offer the MicroShield® technology, a silver-basedantimicrobial coating designed to inhibit the growth of bacteria.

MicroShield® is a registered trademark of Yale Security Inc.,an ASSA ABLOY Group company.

FOR TRAININ

G PURPOSES O

NLY

DATED MATERIA

L

Assa Abloy - 45115 Access 800 NE1...ASSA ABLOY reserves the right to review Approved Reseller’s...

Documents

Transcript of Assa Abloy - 45115 Access 800 NE1...ASSA ABLOY reserves the right to review Approved Reseller’s...