Aspire nov draft - ssn.edu.in · “Ventilation Improvement in a Non-AC Bus” in SAE 2013...

11
Newsletter Mechanical Aspire Achievements in Sports Projects Industry Research and Education , , , Volume 3, Issue 11, November 2013 External Recognition Dr.S.Vijayan visits Singapore and Dr.R.Prakash visits USA for conference presentations Thanks to the financial support of our Management, Dr.R.Prakash, presented a paper titled “Ventilation Improvement in a Non-AC Bus” in SAE 2013 Commercial Vehicle Engineering Congress, held during 1 – 3 October 2013 at Rosemont, Illinois, USA. He had the opportunity of meeting several company technical heads and university professors in the conference. This was part of the research work done with final year students at Ashok Leyland, Chennai. I sincerely thank SSN Management for sponsoring me to present a research review article entitled “The Role of Friction Stir Welding Process Parameter on Mechanical properties of Magnesium AlloyAZ31B” in International Conference on Advances and Trends in Engineering Materials and their Applications (ATEMA 2013) held during October 11-12, 2013, at Singapore. The conference was jointly organised by Hong Kong educational society and Trans Tech publication Inc. Researchers from China, Malaysia, Japan and India participated in the conferences. Advanced Material Research (AMR) one of listed journal in Anna University has accepted to publish the review article. The interactions with the eminent researchers from various countries were very useful and it provides a platform to continue research on Materials and Manufacturing. Dr.S.Vijayan

Transcript of Aspire nov draft - ssn.edu.in · “Ventilation Improvement in a Non-AC Bus” in SAE 2013...


Newsletter

Mechanical Aspire

Achievements in Sports Projects Industry Research and Education , , ,

Volume 3, Issue 11, November 2013

External Recognition Dr.S.Vijayan visits Singapore and Dr.R.Prakash visits USA for conference presentations

Thanks to the financial support of our Management, Dr.R.Prakash, presented a paper titled

“Ventilation Improvement in a Non-AC Bus” in SAE 2013 Commercial Vehicle Engineering Congress,

held during 1 – 3 October 2013 at Rosemont, Illinois, USA. He had the opportunity of meeting several

company technical heads and university professors in the conference. This was part of the research

work done with final year students at Ashok Leyland, Chennai.

I sincerely thank SSN Management for sponsoring me to present a research review

article entitled “The Role of Friction Stir Welding Process Parameter on

Mechanical properties of Magnesium AlloyAZ31B” in International Conference on

Advances and Trends in Engineering Materials and their Applications (ATEMA

2013) held during October 11-12, 2013, at Singapore.

The conference was jointly

organised by Hong Kong

educational society and Trans Tech

publication Inc. Researchers from

China, Malaysia, Japan and India

participated in the conferences.

Advanced Material Research

(AMR) one of listed journal in

Anna University has accepted to

publish the review article. The

interactions with the eminent

researchers from various countries

were very useful and it provides a

platform to continue research on

Materials and Manufacturing.

Dr.S.Vijayan


The highlights of the design conference are listed below

College Scores

SRM University 77.9

Jeppiar Engg College 74.3

Dr.Mahalingam College 73.4

SSNCE 73.34

IIT Delhi 72.63

Mepco Schlenck 65.1

BITS Pilani 63

PSG Tech 60.67

MIT, Chromepet 60

http://suprasaeindia.org/pdf/VIRTUAL_SUPRA_2013_WinnersList.pdf

Invitations to reviewDr.Ananthapadmanaban has been invited to review a Journal paper in the International Journal of Control Engineering and Technology

Dr. A.K.Lakshminarayanan, Associate Professor was invited to review research proposals submitted to South Africa's National Research Foundation by University of Johnesburg in the area of friction stir welding

SSN wins Design Challenge of Valeo

SSN mech races ahead of Stalwarts in Automobile engg...

SAE Super Car design contest- has announced the scores. It is

heartening to see that our students have been able to score

way ahead of established stalwarts in Autmobile engg- like

IIT Delhi, PSG , BITS Pilani, Mepco Schlenk and MIT Guindy.

Kudos to the SAE team and to Dr.N.LakshmiNarasimhan

and Dr.R.Prakash who keep the students continuously

enthused.

Our students are now building their concept car. The expected budget is around Rs.10 lakhs. We are currently approaching various corporates for funding support. If anyone has any access to funding points- let us know. Check the full results at..

1. The students have received a cash prize of Rs 10,000

2. The company has awarded our institution with “innovative champion winner of the smart car design challenge”

3. The students can apply for their internship and placement to the company

4. The core committee has recommended their work to a international students contest which is proposed to be

conducted on February 14, 2014 at France

Karthik Dr.SSK Ashwin Clement

ABSTRACT

Ensuring safety of passengers during vehicle crash is

one of the important challenges for a vehicle designer.

Though many accidents are due to various factors that

are extraneous to vehicle, it becomes essential to assure

the safety of the passengers. The present work mainly

suggests a flexible car cabin system which prevents

the head collision with interior compartment using

sliding mechanism controlled by pneumatic system. The

proposed novel design improves the crash deceleration

pulse and the distance between the occupants and dash

board. The translation and rotation of the occupant can

also be reduced by increasing the seat plane inclination.

Ashwin Clement H and Karthik R of third year Mechanical Engg

have won the first prize in a design conference conducted by

Valeo India Pvt ltd.

Frontal Head Collision Control of occupants using innovative car cabin system – Design Report

Thanks to Dr.S.Sureshkumar

w ho taught them the methodology

to simulate such instances in computer

and guided them tow ards success.


Government of India has identified "Combustion" as the thrust area of research and taken initiatives to promotein a large scale, research in the area of Combustion. To take this forward, IISC and IITM have initiated anOutreach program, with the intention to admit students to direct Ph.D., and M.S. in the area of Combustion.Students of Third Year can also apply this year and get the advance admission for direct Ph.D. at IITs subject togetting a valid GATE score during their final year.

As part of this outreach program, two Sr. Profs. from IIT Madras headed by Prof. Balaji visited our campus onOct 8, 2013. They addressed the students of third and Final year Mech /Chem enlightening ResearchOpportunities in the area of Combustion at IITs and IISC. This is obviously a recognition for the capabilities ofour students.

Out of the three short films that won in the SRM Envision Short film contest, two were from SSN(During'Combusted 2k13' Ramapuram campus mechanical symposium).

2nd prize was won by 'Ball poche', which was written and directed by Madan Lal of 3rd year mechanical. Watchthis comedy at http://www.youtube.com/watch?v=nRUhcBc1M7Q

3rd prize was won by 'C6: From Coal to Diamond' - written and directed by Gowthaman.T of 3rd year mech.Chennakesavan of 3rd year mech edited the film and Adityan took care of cinematography. Watch this sensationat http://www.youtube.com/watch?v=-8jZLvgq2QA

The first program which will be offered by SSN SACE is a Post Graduate Certificate Program inBusiness Analytics. This six-month residential program has been designed in consultation withprofessionals from renowned industries like IBM, Accenture, HCL, TCS, etc. This program will coverdescriptive and predictive analytics. The participants will get hands-on experience with IBM tools. This

program is scheduled to be launched by Mr Nadar on 3rd Jan., 2014.

SSN SACE will seamlessly work with the other schools of SSN Institutions to identify and offerpotential industry relevant programs. I look forward to your whole-hearted support for making thisinitiative a grand success.

IIT targets SSN students for its Ph.D. Mech programs

Students make their mark in Short Film contest at SRM

Info to Alumni

Campus Update

I am delighted to announce the establishment of a new constituent of SSN Institutions - SSN School of

Advanced Career Development (SSN SACE). The SSN

SACE has been established with a vision of offering non-degree education programs, aligned to globally emerging trends in industry.

The mission of SSN SACE is to enable the participants to enhance their professional competencies through innovative programs. I am happy to inform that Dr Albal will

be the Director of SSN SACE.

President announces the creation of SSN-SACE


The Theatrics Club of SSN "Lights Out

Please" Participated in the Theatrical

event at "FESTEMBER", the annual

cultural fest of NIT Trichy and won the

First Prize. They Were awarded with a

cash prize of Rs.10,000.

Abhishel Dutta of 2nd year chemical was judged as the best actor.

Adithyan Karunakaran and Adithya .V of mech were part of this team.

Adityan K, reports on the Theatrics Club Activity

Pranav Prakash reports on the English Literary Club Activity

A survey taken by Arjhun, Bruno, Sai Nath and myself, of companies that had come for placements this past semester revealed that communication skill is a prime expectation. With this in mind, Gokul Ram, Mubarak and the rest of us from final year decided to hold workshops on communication specifically aimed at, but not restricted to, students who had Tamil as the medium in school.

Different members of the ELC will be taking over for subsequent workshops that we plan to have atleast once a month from here on, with Group Discussion and Mock Interviews on the agenda for the immediate future. Any suggestions or requests from the faculty or from the guys and girls of our department are most welcome. We’d also love it if

you could join us for the next workshop in January.

The first edition of the workshop was conducted by Pallavi from III year ECE

Pranav,

Final yr mech

Adityan .K


Department Update

Now, he is pursuing Ph.D (Part Time) in the area of

Aluminum Metal Matrix Nanocomposite Materials at Anna

University, Chennai.

He has over 13 years of teaching experience. Prior to

joining us he w as an Assistant Professor in Sri

Venkatesw ara College of Engineering.

He has 3 papers in International Journals, 2 paper

presentation in International Conferences and 2 in

National Conferences

His Areas of Interest include: Composite Materials,

Mechanics of Machines and Fluid Mechanics

He is a trained Internal Auditor for ISO auditing.

Mr. L. Poovazhagan, Assistant

Professor joined us on 30th

September 2013. He has

completed his B.E in Mechanical

Engineering from Coimbatore

institute of Technology (CIT) and

M.E in Manufacturing Engineering

f rom Annamalai University.

Puja Celebrations..

The Annual Puja Celebrations in full swing at Workshop.. on 11 october, 2013.

Catch a glimpse of staff fully engrossed-as they do in any work they get involved...

Two more patents filed..

Patents for two new devices as belowhave been filed on October 30, 2013. i) Multipurpose hand-held cooling cum cleaning device(student inventors: Subash, Gokul, Keshika and Praveen) and

ii) Airconditioner cum auxiliary cooler with evaporative condenser (student inventors: Sai Shreenaath, Vishnu Swami, Jigar Golecha and Bruno Augustin)

Congrats to Dr.M.Suresh who guided these two projects towards patentable inventions

Research Progress

Mr.K.Subbiah submitted

Thesis on Oct 18, 2013.

Mr.R.Prakash completed his

viva voce on Oct25 and has

been recommended for the

award of Ph.D.

Mr.L.Poovazhagan's paper titled “Preparation of SiC nano-particulates reinforced aluminum matrix nanocomposites by high intensity ultrasonic cavitation process", has been published in the International Journal "Trans.of Indian Institute of Metals", Springer.

Publications

Mr.M. Selvaraj's paper titled "Thermal model for friction stir welding of mild steel", has been published in Multidiscipline Modeling in Materials and Structures, Vol. 9, No. 1, pp.49 – 61, 2013

Total


A.S.Ramana, R. Prakash,D. Ebenezer Conducted a One Day Workshop on "Alternative Sources of Energy Issues & Challenges" on Oct 3, 2013.

Dr.K.Elangovan and Dr.A.K.Lakshminarayanan conducted a one day workshop on Response Surface Optimisation- Oct 22, 2013

Workshops conducted

Project Efforts

Dr. N. Nallusamy & Dr. S. Rajkumar submitted a project proposal on Reduction of exhaust emissions in multi-cylinder automotive diesel engines using biodiesel fuels derived from non-edible vegetable oils-to Ministry of Forest and Environment, requesting a funding of Rs. 35.18 L

Dr. S. Vijayan, submitted 1.a research proposal to Tamilnadu State council for Science and Technology (TNSCST) on Friction Stir Welding (Rs.4 lakhs).2.He also submitted a Travel Grant request to CSIR

Dr.M.S.Alphin has submitted 1.FDP (Faculty development Program) proposal on "Computer Aided Product Design". To AICTE, requesting a funding of Rs. 6.10 Lacs2.Also applied to FDP scheme under Anna University for Rs.80,000 for conducting FDP on Finite Element Analysis

Dr.V.E.Annamalai has submitted the following proposals:

1.Development of eco-friendly coolants for grinding to Ministry of Forest and Environment, requesting a funding of Rs. 49.55 L

2.”Reducing the wastage of grinding wheel due to dressing” to Tamilnadu State council for Science and Technology (TNSCST) for Rs.4 Lakhs.

Guest Speakers Dr. N. Rajalakshmi

Senior Scientist, Centre f or Fuel Cell Technology,

Dr. G. Giridhar,

Solar Radiation Resource Assessment,

Centre f or Wind Energy Technology

Advances in Fuel Cell Technology

Efficient Solar Energy Conversion

Solar & Biofuel options

Energy Security – Problems & Solutions

Topics Covered


III semester Mechanical Engineering (Sec-A) students V.R.Balaji and K.V.J.Arun presented a paper and won thesecond prize in FARSCA'13 Symposium held at Anna University Chennai, University College of Engineering,Pattukkottai on 04.10.13.

Study of microstructure and mechanical properties of dissimilar Al-Cu Friction stir welded lap joint., a paper by K.Elangovan, Kalaiselvan.J, Vigneshram S.K, Vinoth Kumar C, Vivek Ananthakrishnan, was presented at theInternational Conference on Recent Development in Mechanical and Industrial Engineering (IRAJ-ICRDMIE2013) 20th October 2013, Chennai, India. ISBN: 978-93-82702-34-4

Rank Name

3 Satyanarayana Rao.V

10 Sarah Ann Ramji

17 Sharan Srinivasan

18 Seshadri

21 Karthik.M.

25 Dheeraj. P

27 Naveen. I

36 Venkatesh Adithya .S

46 Manojkumar

47 Vignesh. GA

Dr.Vijay Sekar KS ,participated in a 2 day workshop titled" Fail safe design, Early detection and Avoiding future recurrence of failures" organized by jointly by Dept. of Mechanical Engineering, Anna University and Society for failure analysis Chennai on 28,29 Oct 2013.

Workshop AttendedPlacement Update

New Entrants

1.Royal Textiles

2.Danfoss

UG 32 out of 54 placed. Many more interviews yet to be fixed.

PG 5 out of 18 in first batch of M.E. Manufacturing, placed.

Dr.N.LakshmiNarasimhan

Dept Coordinator

StudentActivity

Sportsman in PG Manufacturing

A.VinayakramFinal Yr M.E.Mfg

Winner of Inter Zonal Sports Meet held at J.J. College of Engineering and Technology, Tiruchirappalli,

2013.

Winner of District-Level Youth Cultural and Sport Festival held at district stadium, Virudhunagar, 2010.

Participated in Colloseum Sports Meet, as representative of Kalasalingam University, 2009.

Winner of District-Level Republic Day Gam es and Sports held at KSR HSS, Tiruchengode, 2006-2007.

Winner of Zonal Level Gam es and Sports held at Government HSS, Kokkarayanpettai, 2006-2007.

Winner of District-Level Republic Day and Bharathiar Day Gam es and Sport Meet held at KRP HSS,

Namakkal, 2007-2008.

Represented my school (VVMHSS) for State Selection held in ooty, 2007.

I thank the Management for granting me a

scholarship in "special sports category".

These are my achievements in sports till now Vinayakram is a football player

Alumni who worked their way into University Ranks

Incidentally,

it was Satyanarayana Rao,

who was chosen as the

Best Outgoing student

of SSNCE last yearSarah is now doing her M.S. at

University of Toronto

Institute for Aerospace Studies

Sharan Srinivasan is

Now a Student at

Stanford University

Venkatesh Adithya Shreedharan is a

Graduate Student at Delft University of

Technology , T he Hague Area,

Netherlands

Manojkumar is now in Ford

Congrats to all those who made us proud.

10 University ranks out of 60 students is a good feat!


News on Internship

Girish underwent

Internship at ISRO last year.

He alerts us on

possible internships

this year. Last date Nov 30

The three national Science Academies of the country (Indian Academy of

Sciences, Bangalore; Indian National Science Academy, New Delhi and The

National Academy of Sciences, India, Allahabad) offer several two-month Summer

Fellowships to enable students/teachers to work with eminent scientists of the

country during 2014. The announcement inviting applications along with the

application format and a list of guides willing to accept students/teachers for work

on joint short-term projects are available in the websites of the three Academies

(www.ias.ac.in; www.insaindia.org; www.nasi.org.in).

Applications are invited from interested students and teachers for these

Fellowships. The applications should be submitted online through one of our

websites; however a copy of the application together with enclosures must be sent

by post to the address given below. The last date for receipt of applications online

is 30 November 2013. Information of selection along with concurrence

e-mail: [email protected]

Website: www.ias.ac.in

Forthcoming events

Dr.K.S.Jayakumar, Dr.K.Rajkumar and Mr.K.L.Harikrishna are organising a Two weeks Faculty Development Programme (FDP) on Mechatronics at SSN College of Engineering during 02.12.2013 to 15.12.2013. This is sponsored by AICTE

DrKSJ, DR.KR Mr.KLH

Innovation Challenge

This competition calls on students from all over the world, to submit their visionary ideas and concepts for new Henkel products and technologies. Under the slogan "Create, learn, grow", student teams of two are invited to submit their innovative and sustainable ideas with a special focus on countries in emerging markets such as: Thailand, the Philippines, Vietnam, and Indonesia.

Innovative and sustainable product or technology concepts should be aimed for one of the three Henkel business sectors: Beauty Care, Laundry & Home Care or Adhesive Technologies.

Henkel Innovation ChallengeDeadline: 2013-12-11

Award: Top Prize is an around the world ticket worth 10.000€

Last Date Nov 30, 2013

Students of all fields of studies are eligible, who are at least 18 years old, enrolled in a university, college, or equivalent academia. All teams that qualify for the semi-final are assigned an experienced manager from Henkel, who acts as a mentor, advising the participants on further developing their innovative concepts.

Prizes:

-The 1st winning team at the international final is awarded with a ticket around the world worth 10.000€! -The 2nd winning team is awarded with a travel voucher worth 4.000€. -The 3rd winning team is awarded with a travel voucher worth 2.000€.

http://www.henkelchallenge.com/


More info at http://www.loyaltextiles.com/loyal-textiles.pdf

Mr.S.Saravanan, AGM (HR), Mr.M.Ramakrishnan, VP

(HR) and Mr.R.Shanmugham, Consultant, Qualitree

Loyal Textiles—our new Recruiter

For over six decades, Loyal Group provides a wide range of products and services to textile and apparel Markets, besides fulfilling its commitments towards socio-environmental development. An ISO 9002 2000 accredited, the Group exports products to EU, US, UK, Mexico, Taiwan, Vietnam, Iran, Israel, China, Indonesia, Far-East and South African Countries.

Loyal Textiles was established in 1872, by Sir. E.D.Sasson, as a Spinning and weaving mill with second hand machines imported from England. The Visionary Karumuttu Thiagaraja Chettiar bought this mill in 1953.

Even though the company is more than 100 years old, none of the machines are more than five years old! Their punchline is “Moving ahead of Times in adopting Technology. Staying with time tested Values.”

Committed to philanthropy and socio-environmental development, Loyal Group is a multi-faceted organization, providing an array of products and services for textile and apparel industries. In more than its seven decades of establishment, the Group has created several benchmarks and established milestones for the forthcoming generations.

Loyal Group comprises of three composite mills, one spinning mill, one dye house, four garment manufacturing units, one trading cum retailing company and a Joint Venture trading company in Italy. Besides, the Group has in its fold the 162 year-old watch trading company “P Orr & Sons”, which has 9 operational stores in Tamil Nadu and Pondicherry (India).

Thiagaraja School of Management, Madurai and

P.ORR and Sons, belong to the same group.

Out of concern for the new Manufacturing M.E. Program,

Dr.N.LakshmiNarasimhan located many Manufacturing companies,

out of w hich, Loyal Textiles responded f irst

Our Sincere Thanks to Loyal Textiles who offered the first Placement for our M.E.Manufacturing team


.

��றாவ� விஷய�, 741 அர� கா�நைட ம���வ�க� ேவைல இழ�� ஒேர இரவி� � �ப��ட� ந �ெத�$%� வ��

நிைல ஏ(ப)ட�. இைத விட%*டா� எ�, பணி நியமன� ெதாட�பான ஆவண0க�, நீதிம�ற� தீ�23க�, நாளித6 ெச8திக�,

அரசாைணக�, மாநில ம(,� �ைண9ேசைவயி� விதி:ைறக� எ�, இர; நா)க� <0காம� :=வ�மாக2 ப>�ேத� .

ப>%க2 ப>%க ம���வ�க� ப%க� இ��த நியாய:� ேக�வி ேக)க ேவ;>ய� அரசா0க�திட�தா� எ�,� 3?�த�. சில

ம���வ�களிட� ேபசி, தகவ�கைள� திர)>, பய2படாதீ�க� எ�, ைத?ய� ஊ)>ேன�. இைத எ2ப>யாவ� ேமலிட�தி�

கவன�தி(�% ெகா; ெச�,விடேவ; � எ�, க ைமயாக உைழ�ேத�. அ0� இ��த கா�நைட உதவி ம���வ�க�

பல�� எ� ைககைள2 பி>��, ‘உ0கB%� நா0க� எ�ெற�,� கடைம2ப) �ேளா� ’, எ�, *றிய ேபா� என%�

:(றிC� 3தியேதா� உண�$ ேமலி)ட�.

இ�த2 பிர9ைன ப(றிய வி?வான க) ைர 21.04.13 ஜுனிய� விகடனி� ெவளியான� . ஜூனிய� விகடைன� ெதாட���

வாசி%�� :த�வ�, இைத2 ப>��, 741 ேப?� ேவைலைய உ,தி ெச8தா�. வி��நகைர9 ேச��த ஒ� அர� உதவி கா�நைட

ம���வ� எ�ைன� ெதாைலேபசியி� ெதாட�3 ெகா; , “க) ைர ெவளியான�� எ�ன மாய� நட�தேதா, :த�வ�

அவ�களி� ேநர>2 ப?சீலைனயி� இ2பிர9ைன ெச�,�ளதா� எ0க� ேவைல%� இனி ஆப�� இ�ைல”, எ�, மகி69சி

ெபா0க% *றினா�.

நா�காவ� விஷய�, ஈழ�தமிழ�க� நலI%காக தமிழக� மாணவ�க� நிக6�திய உ;ணாவிரத�. ெச�ைனயி� பல

ப�திகளி� ஒ� மாத�தி(�� ேமலாக நட�த ப�ேவ, ேபாரா)ட0கைள ெச8தியா%கி ஒ� ப�தி?ைகயாளனாக எ� பணிைய

ச?யாக ெச8ேத�. ேமC�, இ2ேபாரா)ட�தி� ெபாறியிய� க�J? மாணவ�க� ெப?ய அளவி� கல��ெகா�ளாத�

அவ�கBடய தவ, ம) � இ�ைல, எ�, ெபாறியிய� மாணவ�கைள ஆத?�� ஒ� க) ைர எ=திேன�.

ஐ�தாவ� விஷய�, ைமலா2L?� இ�%�� டாMமா% கைடயா� அ0� ப�ளி மாணவிகB%�� ெப;கB� பிற

ம%கB%�� அ9�,�தலாக இ�%கிற� எ�, அ�த2 ப�தி ம%க� ேபாரா)ட� நட�தினா�க� . ேபாலீM வ�த�� ஆ;க�

ெம�வாக வ)ீ>(�� ெச�, விட, ெப;க� ைத?யமாக எதி��� நி�றா�க�. ஆ�2பா)ட�ைத% ைகவி) % கைல��

ெச�லாவி)டா� ப2ளி% நிOச�M எ�, ைக� ெச8ேவா� எ�, ேபாலீசா� எ9ச?%க, “ஒ� :>$ கிைட%�� எ�றா�

ைகதாவ� எPவளேவா ேம�!”, எ�, ைத?யமாக2 ெப;க� ைகதாக ச�மதி�தன� . �மா� ஏ= ேபாலீM ேவ�க� அணிவ���

நி(க ஒPெவா�வராக வ?ைசயி� எ�த வித எதி�23� கா)டாம� ேவனி� ஏறின�.

Vishnu Speaks.. Continued.. ஜூனிய� விகடI%காக நா� ைகயி� எ �த மற%க :>யாத ஆ,

விஷய0களி� ஒ�,, உ�தர2 பிரேதச :த�வ� அகிேலQ யாதP உடனான

ச�தி23 . இர;டாவ� விஷய�, ஒ�நா� வழ%க�ேபா� க�J?%�2 ேப��தி�

வ��%ெகா;>��த ேபா�, ெகா�%�2ேப)ைடயி� ஒ� ெப; உயி�ட�

எ?%க2ப)டா�, எ�, தகவ� வ�த�, நா� அ0� ெச�ேற ஆகேவ; �.

>ைரவ?ட� இைத ெசா�னா� பதறி வி வா�, பிர9ைன ஆகிவி �, எ�,,

“ அவசரமாக ஒ� க�யாண�தி(�9 ெச�ல ேவ; �”, எ�, ெபா8 ெசா�லி

பாதியி� இற0கிேன�. ஒ� �%க வ)ீ>(�9 ெச�ல இ2ப> ஒ� ெபா8ைய

ெசா�ல ேவ;>யதாயி(,.

ெகா�%�2ேப)ைடயி� ெச�ைனயி� ம(ெறா� :க�ைத2 பா��ேத� . வ,ைம

மி��த, அ>2பைட� ேதைவக� *ட இ�லாத விளி�3 நிைல மனித�கைள

அ�கி� இ��� பா��தேபா� என%�� ேதைவ2ப)ட ேகாப� கிைட�த�.

ஐ.ஏM.எM. அதிகா? ஆன��, எ� மனதி� ேச��� ைவ�தி�%�� ேகாப�ைத பாசி)>வாக இ�த ச�க�தி(� ந�ல ெசய�க�

�லமாக ெசலவழி%க ேவ; � எ�ப� எ� ெதாைலேநா%� எ;ண�. ெகா�%�2 ேப)ைடயி� அ�த% ேகாப� நிைறயேவ

கிைட�த�. ெகா�%�2ேப)ைட% காவ� நிைலய�தி� எ�னா� இ�Mெப%ட�ட� ச? சமமாக உ)கா��� வழ%� ப(றி

உைரயாட :>�த�. ெச8தி ஊடக� ஜனநாயக�தி� நா�காவ� <; எ�, ஏ� அைழ%க2 ப கிற� எ�, என%� அ2ெபா=�

3?�த�.


த� வ ீ த� � �ப� எ�, இ��த ம%கB%� இ�தைன ைத?ய� வ�கிற� எ�றா� அவ�க� எ�த அளவி(� இ�த

அரசா0க�தி� ேம� விர%தியைட�தி�%க ேவ; �, எ�ப� ேபா�ற ேக�விக� என%�� வCவாக எ=�தன. கி)ட�த)ட

க�OனிM களாக மாறி ேவI%�� தின�தின� ஏ,� இவ�கைள2 ேபா�ற பாதி%க2ப)ட ம%கB%� ஜனநாயக :ைற2ப>

எ� தீ�வாக அைமR�, எ�, என%�� ஒ� சி�தைன ஏ(பட இ�த நிக6$ ஒ� காரணமாக அைம�த�.

ஆறாவ� விஷய�, Sting operation! 3ழ� சிைறயி� அதிகா?கைள% கீ6�தரமாக நட��கிறா�க� எ�, தகவ� வ�த�.

ப�தி?ைகயாள� எ�ற உ;ைமைய மைற��, அ0� வசி%�� ஒ� கீ6நிைல அதிகா?யி� ெந�0கிய உறவின�க� எ�,

ெசா�லி 3ைக2பட%கார�ட� உ�ேள Sைழ�ேத�. நா� அ0� ெச�வத(� ஒ� வார� :�3 சிைறயி� ைகதிக�

�த�திரமாக நடமா> பா�)>ெய�லா� ெகா;டா>யி�%கிறா�க� எ�ற ெச8தி அதி�9சியளி�த� . ெச�ேபா� :த� கTசா

வைர ெவளிேய இ�%�� அைன��� உ�ேள கிைட%கிற� எ�ற ெச8தி கிைட�த� . 3ழ� சிைற வளாக�தி(� உ�ேள

இ�%�� ஈழ� தமிழ� அகதி :காைமR� பா�%�� வா823 கிைட�த�.

கைடசியாக நா� எ=திய க) ைர, பழேவ(கா)>� மைற���ள வரலா, ப(றிய� . இ�, ெச�ைன எ�, ஒ� நகர�

இ�2பத(�% காரணேம பழேவ(கா எ�I� சிறிய கிராம�தா� , எ�ப� ேபா�ற பல விய2L) � வரலா(, உ;ைமகைள

ெசா�C� அ�த% க) ைர ப�ைம விகட� இதழி� ெவளியாக இ�%கிற�.

இ�த ஒ� வ�ட ப�தி?ைக2 பணியா� எ�Iைடய ந)3 வ)ட� ஒ� 3திய ப?ணாம�ைத2 ெப(,�ள� . ந>க�க�,

இய%�ன�க�, எ=�தாள�க� , ச�க ஆ�வல�க� எ�, பலதர2ப)டவ�களி� அறி:க:� ந)3� என%� ஃேபM3%கிC�

ெவளியிC� கிைட�தி�%கிற� . த(ெபா=� என%� சிற�த ப�தி?ைகயாள� அ0கீகார� கிைட�தி�2பதா� இ�தியாவி� உ�ள

எ�த� தமி6 நாளித6 ம(,� வார இதழிC� எ2ெபா=� ேவ; மானாC� என%� ேவைல கிைட%�� எ�ற நிைல

ஏ(ப) �ள� . தின:� க�J?%காக 60 கிேலாமீ)ட� பயண� ெச8�� எ�னா� சிற�த ப�தி?ைகயாள� வி�திைன

வா0கியி�%க :>�தி�%கிற� எ�றா� அத(� எ� க>ன உைழ23 ம) ேம காரண� அ�ல. ேவைல2 பB காரணமாக

க�J?%� நா� வராத ேபா��, மதி2ெப;க� �ைற�தேபா��, எ�ைன எ� க�J? ேசா�வைடய விடவி�ைல. ஆ0கா0ேக

எதி�கால�ைத2 ப(றி சில ஆேலாசைனகB� அறி$ைரகB� க�J?யி� இ��தாC�, இ�த% க�J? என%களி�த

�த�திர�ைத நா� :=வ�மாக2 பய�ப �தி% ெகா;ேட�. என%� ஒ��ைழ2பளி�த எ� க�J?%� எ� ந�றி .

க�J?2 ப>2ைப� தா;> நா� சாதி%க என%� ஊ%க:� �த�திர:� அளி�� , என%� மிக2 ெப�� ப%கபலமாக

இ��த எ� அ�மா$%�� அ2பா$%�� எ�Iைடய அ�3 :�த0க� . இ�த ஒ� வ�ட ப�தி?ைக2 பணியி� என%�

உ,�ைணயாக இ��த ந;ப�கB%�� சக ப�தி?ைகயாள�கB%�� , எ�Iைடய எ=�ைத� அ0கீக?��, ெதாட��� உ(சாக�

அளி��� விம�சி��� வ�த வாசக�கB%�� எ�Iைடய மனமா��த ந�றிக� இ�வைர எ=�தி� ச�பாதி�த ப�தாயிர��9

ெசா9ச Vபாைய எ� அ2பாவிட� ஒ2பைட%க2ேபாகிற அ�த ெநகி69சியான த�ண�ைத எதி�ேநா%கி% கா�தி�%கிேற� .

அர� கா�நைட ம���வ�க� ப(றிய ெச8தி ஜூனிய� விகடனி� ெவளியான அ �த நா� எ�ைன� ெதாைலேபசியி�

ெதாட�3 ெகா;ட அ�த ம���வ�, “எ2ப> ந�றி ெசா�ற��ேன ெத?யல. ஒ�நா� வ)ீ %�% க;>2பா நீ0க வரW�”, எ�,

ெசா�னா�. மனநிைற$ட� ந�றி ெசா�லி அைழ2ைப� �;>�ேத�. ஒ�, ம) � 3?�த�. இ� ெவ,� ஆர�ப�தா�,

இ�I� கட�� ெச�ல ேவ;>ய <ர� நிைறய இ�%கிற�

Compiled and released by HoD Mech feedback to [email protected]