Aspa Table B Y F R D E S I G N

VICCARBE Technical Info V 01

VICCARBE Technical Info EN2

Aspa Table B Y F R D E S I G N

Technical Info EN 2006

Collection of tables for the residential and commercial market.

The wide range of options, both in height and finishes, makes Aspa a highly versatile table and a best seller in our collection.

VICCARBE Technical Info EN3

AS74D60 _round 60 | round 235⁄8

AS74D80_round 80 | round 311⁄2

AS74D100_round 100 | round 393⁄8

AS74D120_round 120 | round 471⁄2

AS74C80_table square 80x80 | table 311⁄2 x 311⁄2

80 cm |

31.50” 80 cm | 31.50”

Ø120 cm| Ø47.24”Ø100 cm| Ø39.24”

Ø60 cm | Ø23.62”

Ø60 cm | Ø23.62”

Ø80 cm| Ø31.50”

Thickness and type of table top edges available for each material:

19 mm

Melamina | HPL

12 mm

Compacto

MDF

22 mm

HEIGHT 74 | ASPA HEIGHT 29 9⁄64

ASPA HEIGHT 110 | ASPA HEIGHT 43 5⁄16

74 c

m |

29.

13”

110

cm |

43.

31”

AS110D60_round 60 | round 235⁄8

74 c

m |

29.

13”

74 c

m |

29.

13”

74 c

m |

29.

13”

74 c

m |

29.

13”

VICCARBE Technical Info EN4

STRUCTURE

TABLE TOP

whiteRAL 9003

whiteRAL 9003

greyRAL 7004

redRAL 3001

mustardRAL 1012

greenRAL 6007

silverRAL 9006

blackRAL 9005

blackRAL 9005

blueRAL 5024

tobaccoRAL 8028

smokeRAL 1019

sandNCS 3005Y50R

Lacquered (microtexturized)

Powder coated

Stained

matt oak cognac wenge ash

HPL with MDF

Low pressure laminate

Compact laminate

black

black

black black edge

white

white

whitewhite edge

whiteblack edge

Structure ‒ calibrated powder coated steel tube in thermoreinforced polyester in black or white. Different base sizes available.

Table top ‒ available in different measures, materials and thickness:

- “Sandwich” consisting in two parts, where the underneath part is always lacquered in the same colour that the base (white or black) and the top is in MDF lacquered or oak verneer finishes of our collection.

- Low Pressure Laminate (LPL) thickness 19 mm with 1,5 mm PVC edge, in white or black.

- 12 mm thick compact laminated table top. The edge can be in white or black. With a black edge, the surface of the tabletop can be white or black; for a white edge, it can be white.

- High Pressure Laminate (HPL) thickness 19 mm with 1,5 mm PVC edge, in white or black.

NOTE1: The height of the table varies according to the thickness of the dfferent table tops. The height indicated below refers to the MDF table.

NOTE 2: Due to the fact that the wood used is natural, the finish may vary.

TECHNICAL INFO

CERTIFICATIONS

UNE EN 15372:08, UNE EN 622-5:2007, UNE EN 622-1:2004, UNE EN 11022-1:92, ANSI/SOHO S6.5 R2013

VICCARBE Technical Info EN5