Asme Ccase Subject

5/24/2018 Asme Ccase Subject

1/28

SUBJECT INDEX

Subject CaseSubject Case

Miniature Electric Boilers Fabricated of Austenitic Stain-SECTION I

less Steel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1896POWER BOILERS

Minimum Metal Temperatures of PMB Pressure VesselsAlloy UNS N06690 Up to 1200F . . . . . . . . . . . . . . . . . . . 2083 During Hydrostatic Testing . . . . . . . . . . . . . . . . . . . . . . . 2255

Alternative Rules for Heat Treatment of Boiler Modified 9Cr-1Mo-V Cast Material . . . . . . . . . . . . . . . . . . 2192

External Piping. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1934 Nickel-Chromium-Iron (Alloy UNS N06600) . . . . . . . . . . 1827

Alternative Rules for Outside Diameter Tolerance for Nickel-Chromium-Iron-Aluminum Alloy (Alloy N06601) 1500

Pipe . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2237 Nickel-Chromium-Molybdenum-Columbium Alloy (UNS

Alternative Rules for the Postweld Heat Treatment of N06625) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1935

Finned Tubes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2215 Nickel-Iron-Chromium Alloy UNS N08811. . . . . . . . . . . . 1987Alternative Rules for Tolerance for Inside Diameter Di- Nickel-Iron-Chromium Alloys 800 and 800H (UNS

mensioned Pipe. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2273 N08800 and N08810) and Nickel-Iron-Chromium-Mo-

Attachment of Nozzles or Couplings to a Boiler lybdenum-Copper Low-Carbon Alloy (UNS N08028). . 1325

Vessel After Postweld Heat Treatment . . . . . . . . . . . . . . 1918 Nickel-Iron-Chromium-Molybdenum-Copper Alloy (UNS

Attachment of Unflanged Tubesheets to the Shell N08825) for Water Wetted Service. . . . . . . . . . . . . . . . . 1936

of Firetube Boilers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2084 Nickel-Molybdenum-Chromium Alloy (UNS N10276) . . . 1924

Austenitic Steel Castings . . . . . . . . . . . . . . . . . . . . . . . . . . . 1954 Ni-Cr-Co-Mo Alloy (UNS N06617) . . . . . . . . . . . . . . . . . . 1956

Austenitic Stainless Steel Seamless Tube Ni-Cr-Mo Alloy (UNS N06022) for Code Construction

(25Cr-20Ni-Cb-N) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2115 for Temperatures up to 1250F . . . . . . . . . . . . . . . . . . . . 2226

Austenitic Stainless Steel Seamless Tubes TP347HFG Ni-22Cr-14W-2Mo-La Alloy (UNS N06230). . . . . . . . . . . 2063

(18Cr-10Ni-Cb). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2159 Precipitation-Hardening Nickel Alloy (UNS N07718)

Changeover Valves Installed Between Safety Valves or Used as Bolting Material . . . . . . . . . . . . . . . . . . . . . . . . . 1993

Safety Relief Valves and Boilers. . . . . . . . . . . . . . . . . . . 2254 Pressure Relief Valve Part Conversion by

Corrosion Resistant Coating of Pressure Relief Valves by Assemblers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2079

Assemblers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2208 Restricting Lift to Achieve Reduced Relieving Capa-

Design of Safety Valve Connections. . . . . . . . . . . . . . . . . . 1876 cities of Full Lift, Nozzle Type, Flat Seated Safety and

Drilled Holes Not Penetrating Through Vessel Wall . . . . . 1998 Safety Relief Valves. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 192318Cr-Ti Alloy (UNS S43035) . . . . . . . . . . . . . . . . . . . . . . . 2165 SA-487 Grade CA6NM Class A . . . . . . . . . . . . . . . . . . . . 2073

Electric Resistance Welded Low Alloy Steel Boiler Safety Valve Blowdown. . . . . . . . . . . . . . . . . . . . . . . . . . . . 2071

and Superheater Tubes . . . . . . . . . . . . . . . . 1984, 1996, 2026, 2059 Seamless 9Cr-2W Material . . . . . . . . . . . . . . . . . . . . . . . . . 2179

Exemption for Attachment Strength Calculations. . . . . . . . 2191 Seamless 12Cr-2W Material . . . . . . . . . . . . . . . . . . . . . . . . 2180

Feedwater Supply for Atmospheric Pressure Circulating Seamless 2.25Cr-1.6W-V-Cb Material . . . . . . . . . . . . . . . . 2199

Fluidized-Bed (ACFB) Boilers . . . . . . . . . . . . . . . . . . . . 2160 Section VIII, Division 1, Unfired Steam Boiler in Section

Fe-22Cr-21Ni-18.5Co-La Alloy UNS R30556 for I System . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1855

Code Construction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2010 Sequencing Water Column Blowdown Valve. . . . . . . . . . . 1912

F-Number Grouping for Ni-Cr-Fe, Classification UNS Sole Use of Metric Units for Pressure Relief Device

N06052 Filler Metal. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2142 Nameplates . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2116

F-Number Grouping for Ni-Cr-Fe, Classification UNS 21Cr-11Ni-N Alloy (UNS S30815) for Code

W86152 Welding Electrode. . . . . . . . . . . . . . . . . . . . . . . 2143 Construction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2033

For Materials in Inventory. . . . . . . . . . . . . . . . . . . . . . . . . . 2053 Use of

Forgings of Nickel-Iron-Chromium Alloys N08800 and B 43 Seamless Red Brass Pipe (UNS C23000) With

N08810 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1949 Drawn General Purpose Temper (H58) for Threaded

Gray Cast Iron Castings. . . . . . . . . . . . . . . . . . . . . . . . . . . . 1849 Piping for Construction of PMB and PEB Miniature

Electric Boilers. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2172Isolating Stop Valve for Power Actuated Pressure Relief

Valve; Use of Ball Valve in Lieu of OS&Y Valve . . . . 2232 Existing Supply of Electric Boiler Nameplates . . . . . . . 2190

Flat Glass Water Gage Assembly Without ShutoffMaterials for Bodies, Bonnets, Yokes, Housings and

Holders of Pressure Relief Devices. . . . . . . . . . . . . . . . . 1750 Valves per PG-60.1.6. . . . . . . . . . . . . . . . . . . . . . . . . . 2182

xiii SUPP. 1 BPV

This is Electrontic File Page # 13


2/28

- -

Subject Case Subject Case

SA-182, Grade F12, Class 1 Forged or Rolled Alloy- Semi-Permanent Mold Cast Aluminum Alloy A356.0

for the Manufacture of Heating Boilers UnderSteel Pipe Flanges, Forged Fittings and Valves, and

Parts for High-Temperature Service . . . . . . . . . . . . . . 2183 Part HC. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2153

UNS C90300 Material for Copper Alloy SandSA-333, Grade 6 Seamless and Welded Steel

Pipe . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2056 Castings. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2184

Valve Markings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2256Watertube-to-Tubesheet Attachment Welds . . . . . . . . . . . . 2086

Welded Pipe as the Shell of a Boiler . . . . . . . . . . . . . . . . . 2042

Weld Joints Between Materials of Unequal Thickness for

Steam Drums and Mud Drums . . . . . . . . . . . . . . . . . . . . 2210SECTION V

NONDESTRUCTIVE EXAMINATION

SECTION II Evaluation of Nonrelevant and Geometric Reflectors . . . . 2275MATERIAL SPECIFICATIONS PART A Use of Wire IQIs Manufactured in Accordance With Ear-

lier Editions of SE-747. . . . . . . . . . . . . . . . . . . . . . . . . . . 2241Nondestructive Examination As an Alternative to

Hydrostatic Testing for SA-376. . . . . . . . . . . . . . . . . . . . 2096

SECTION VIII, DIVISION 1SECTION II PRESSURE VESSELS

MATERIAL SPECIFICATIONS PART B

A 439 Type D-2 Austenitic Ductile Iron . . . . . . . . . . . . . . 2093No Cases Alloy UNS N08810 Up to 1800F . . . . . . . . . . . . . . . . . . . 1983

Alternative Maximum Allowable Stresses Based

on a Factor of 3.5 on Tensile Strength . . . . . . . . . . . . . . 2290

Alternative Method for Calculating Maximum AllowableSECTION IIStresses Based on a Factor of 3.5 on Tensile Strength . 2278WELDING SPECIFICATIONS PART C

Alternative Rules for Design of Ellipsoidal and

No Cases Torispherical Formed Heads . . . . . . . . . . . . . . . . . . . . . . 2260

Alternate Rules for Heat Treatment of Repair Welds to

Castings. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2205

Alternative Method to Area Replacement Rules for Open-SECTION IIings Under Internal Pressure . . . . . . . . . . . . . . . . . . . . . . 2168MATERIAL PROPERTIES PART D

Alternative Requirements for Seal Welding of Threaded

Alternative Method for Calculating Maximum Allowable Connections, UF-32(b). . . . . . . . . . . . . . . . . . . . . . . . . . . 2016

Stresses Based on a Factor of 3.5 on Tensile Strength . 2278 Alternative Rules for Qualification of Welding Proce-

dures for Attachment of Applied Linings . . . . . . . . . . . . 2220

Alternatives to Appendix 1-7(b) . . . . . . . . . . . . . . . . . . . . . 2236

Aluminum Alloy 3003-H24 for Code Construction . . . . . . 2019SECTION IVASTM A 372-90, Quenched and Tempered Type V,HEATING BOILERS

Grades 1 and 5 Class 65 and Type IX, Classes A

and B Forgings. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2111Alternative Nameplate Stamping Letter Size . . . . . . . . . . . 2193

Depth of Bevel for Firetubes Attached by Welding, ASTM A 372-90, Type V, Grades 1 and 5, Class 65

Types VII and IX, Classes A and B Forgings . . . . . . . . 2113HW-713(a) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2285

F-Number Grouping for Ni-Cr-Fe, Classification UNS ASTM A 736 /A 736M-88 and A 859 /A 859M-88a

Plates and Forgings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1932N06052 Filler Metal. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2142

F-Number Grouping for Ni-Cr-Fe, Classification UNS Austenitic Ni-Cr-Mo-Nb Alloy (UNS N06626) . . . . . . . . . 2276

Austenitic Stainless Steel, 18Cr-20Ni-5.5Si, UNS S32615W86152 Welding Electrode. . . . . . . . . . . . . . . . . . . . . . . 2143

For Materials in Inventory. . . . . . . . . . . . . . . . . . . . . . . . . . 2053 Construction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2029

Austenitic Stainless Steel Seamless Tubes and PipeInsulation Attachment Pins . . . . . . . . . . . . . . . . . . . . . . . . . 2132

Integrally Finned Tube Testing, HF-204.1 . . . . . . . . . . . . . 2154 18Cr-11Ni-Cb--N (UNS S34751) . . . . . . . . . . . . . . . . . . 2196

Austenitic Ni-Cr-Mo-W Alloy (UNS N06686). . . . . . . . . . 2198Sole Use of Metric Units for Pressure Relief Device

Nameplates . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2116 Buckling Pin Nonreclosing Pilot Operated Pressure Re-

lief Device. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2267Use of

A 513 ERW Low Carbon Steel Mechanical Tube in Copper Alloy Tube Conforming to SB-75 UNS C12200

Temper O50 for External Pressure Use Up To and In-Water Heater Construction. . . . . . . . . . . . . . . . . . . . . . 2262

Austenitic Stainless Steel Type 304L and 316L Specifi- cluding 400F . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2289

Corrosion Resistant Coating of Pressure Relief Valves bycation SA-479 Bars and Stays in Hot Water Heating

Boilers. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2257 Assemblers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2208

Co-26Cr-9Ni-5Mo-3Fe-2W Alloy (UNS R31233) . . . . . . . 2121Austenitic Stainless Steel TP 316 Ti Less than 316In.

Thickness in Hot Water Heating Boilers . . . . . . . . . . 2135 Design of Layered Vessels Using Flat Ribbon Wound Cy-

lindrical Shells . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2229Austenitic Stainless Steel Type 316 Ti Less Than 316in. Thickness in Hot Water Heating Boilers at 18Cr-15Ni-4Si Stainless Steel, UNS S30600 . . . . . . . . . . . 1953

18.5Cr-15.5Ni-4.5Mo-N Alloy (UNS S31726). . . . . . . . . . 2197MAWP of 80 psi . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2174

Flared Tubing Fittings for Attachment of Watertubes . . 2258 External Design Pressure Rating of SB-359 Copper and

Copper Alloy Heat Exchanger Tubes With IntegralSA-249 Tubes in Firetube Hot Water Heating or Hot

Water Supply Boilers. . . . . . . . . . . . . . . . . . . . . . . . . . 2231 Fins . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2272

xivSUPP. 1 BPV



3/28

- -


External Pressure Design for Titanium Alloy Seamless Precipitation-Hardening Ni-Fe-Cr Alloy (UNS N09925). . 2218

and Welded Condenser and Heat Exchanger Tubes Pressure Relief Valve Part Conversion by

(SB-338) With Integral Fins . . . . . . . . . . . . . . . . . . . . . . 2149 Assemblers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2079

External Pressure Design of Spheres for Human Occu- Pressure Vessels With Overpressure Protection by Sys-

pancy. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1952 tem Design . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2211

F-Number Grouping for Ni-Cr-Fe, Classification UNS Requirements for

N06052 Filler Metal. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2142 Welder Identification Stamping on Aluminum

F-Number Grouping for Ni-Cr-Fe, Classification UNS Materials . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1972

W86152 Welding Electrode. . . . . . . . . . . . . . . . . . . . . . . 2143 Welder Identification Stamping on Carbon Steel

For Materials in Inventory. . . . . . . . . . . . . . . . . . . . . . . . . . 2053 Materials . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1971

Forged Rolls for Corrugating Paper Machinery . . . . . . . . . 2246 Restricting Lift to Achieve Reduced Relieving Capacities

Forged Trunnions for Corrugating Paper Machinery . . . . . 2250 of Full Lift, Nozzle Type, and Flat Seated Safety and

46Ni-27Cr-23Fe-2.75Si Alloy (UNS N06045) . . . . . . . . . . 2188 Safety Relief Valves for Compressible and Income

Impact Test Requirements for Cast Steel Split Loose pressibleFluid Applications . . . . . . . . . . . . . . . . . . . . . . . 1945

Flanges for Glass Lined Vessels . . . . . . . . . . . . . . . . . . . 2181 SA-395 Class 60-40-18 Welded Ferritic Ductile

Impact Tests per Paragraph UHA-51 for Glass Lined (Nodular) Cast Iron . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1939

316L Stainless Steel Vessels . . . . . . . . . . . . . . . . . . . . . . 2209 SA-765 Grade IV Forgings . . . . . . . . . . . . . . . . . . . . . . . . . 2242

Large-end Cone-to-Cylinder Junction for 30 < 60 SA-789, UNS S32304, With Higher Tensile Require-Degrees . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2150 ments. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2058

Laser Welding of Lap Joints . . . . . . . . . . . . . . . . . . . . . . . . 2018 SA-841 Plate. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2130Local Thin Area in Cylindrical Shell . . . . . . . . . . . . . . . . . 2243 17.5Cr-17.5Ni-5.3Si Stainless Steel (UNS S30601). . . . . . 2125Low Carbon-Nickel-Chromium-Molybdenum Alloy UNS Size Limits for Forged Rolls for Corrugating Paper Ma-

N06059 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2134 chinery. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2283Materials for Bodies, Bonnets, Yokes, Housings and Sole Use of Metric Units for Pressure Relief Device

Holders of Pressure Relief Devices. . . . . . . . . . . . . . . . . 1750 Nameplates . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2116Materials in Inventory . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2248 31Ni-31Fe-29Cr-Mo-Cu-Low C (UNS N08028) . . . . . . . . 2189Modified 214Cr-1Mo-

14V Material . . . . . . . . . . . . . . . . . . . 2098 33Cr-31Ni-1.5Mo-0.6Cu-N Austenitic Stainless SteelNickel-Chromium-Iron-Aluminum Alloy (Alloy (UNS R20033) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2227

N06601) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1500 3 Chromium-1 Molybdenum-1/4 Vanadium-Columbium-Nickel-Chromium-Molybdenum-Columbium Alloy Calcium Alloy Steel Plates and Forgings . . . . . . . . . . . . 2151

N06625 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1409 3 Chromium-1 Molybdenum-1/4 Vanadium-Titanium-Nickel-Iron-Chromium Alloy UNS N08811. . . . . . . . . . . . 1987 Boron Alloy Steel Plates and Forgings. . . . . . . . . . . . . . 1961Nickel-Iron-Chromium-Molybdenum-Copper Tube Wall Thickness for Air Cooled and Cooling Tower

Low Carbon Alloy (UNS N08031) for Code Heat Exchangers. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2157Construction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2139 25Cr-7.5Ni-3.5Mo-N-Cu-W Alloy, UNS S32760, Forg-

Nickel-Iron-Chromium-Molybdenum-Copper Low Car- ings, Plate, Sheet, Strip, Bar, Seamless and Weldedbon Alloy (UNS N08926) for Code Construction . . . . . 2120 Pipe and Tube, and Fittings. . . . . . . . . . . . . . . . . . . . . . . 2245

Ni-30Co-28Cr-2.75Si Alloy (UNS N12160) for Code 25Cr-22Ni-2Mo-N, UNS S31050, Austenitic StainlessConstruction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2162 Steel Forgings. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2038

Ni-Cr-Co-Mo Alloy (UNS N06617) . . . . . . . . . . . . . . . . . . 1956 24Cr-17Ni-6Mn-4.5Mo-N, UNS S34565, Austenitic Stain-Ni-Cr-Co-Mo Alloy (N06617) Pipe and Tube . . . . . . . . . . 1982 less Steel Forgings, Bar, Fittings Welded and SeamlessNi-22Cr-14W-2Mo-La Alloy (UNS N06230). . . . . . . . . . . 2063 Pipe and Tube, Plate, Sheet, and Strip . . . . . . . . . . . . . . 2146Ni-Cu-Al Bolting Material, SB-164 Modified . . . . . . . . . . 1192 24.5Cr-22Ni-7.5Mo-3Mn-N Austenitic Stainless SteelNi-Fe-Cr Alloy N08801 . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1671 (UNS S32654) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2195Ni-Fe-Cr-Mo Alloy N08932 Plates . . . . . . . . . . . . . . . . . . . 2097 21/4 Chromium-1 Molybdenum Alloy Steel Plates and

Forgings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1960Ni-23Cr-16Mo-1.6Cu Alloy (UNS N06200). . . . . . . . . . . . 2240

Type 304LN (Alloy UNS S30453) Austenitic StainlessNi-28Mo-3Fe-1.3Cr-0.25Al Alloy (UNS N10629). . . . . . . 2187

Steel. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2127Ni-29.5Mo-2Cr-2Fe-Mn-W Alloy (UNS N10675). . . . . . . 2140

ULT Allowable Stresses for Nickel Steels . . . . . . . . . . . . . 2262Nonreclosing Pressure Relief Devices. . . . . . . . . . . . . . . . . 2091

Unfired Steam Boiler in Section I System . . . . . . . . . . . . . 1855Omission of Lifting Device Requirements for Pressure

UNS J93380 (CD3MWCuN). . . . . . . . . . . . . . . . . . . . . . . . 2244Relief Valves on Air, Water Over 140F, or Steam

UNS N08367 Material . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1997Service. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2203

Use ofPermissible Tolerance for Hemispherical or 2:1 Ellipsoi-

Acoustic Emission Examination in Lieu ofdal Heads on Glass-Lined Vessels. . . . . . . . . . . . . . . . . . 2219

Radiography . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1968Pneumatic Testing of Pressure Vessels, UG-20 . . . . . . . . . 2055

Annealed C12200 Alloy Welded Tubing . . . . . . . . . . . . 2268Pneumatic Testing of Pressure Vessels, UG-90(c)(2) . . . . 2046

ASTM A 240-93, 16Cr-4Ni-6Mn, Type 201LN (UNSPostponement of Mandatory Date for Compliance With

S20153) Plate, Sheet, and Strip for PressureRupture Disk Device Requirements. . . . . . . . . . . . . . . . . 2287

Vessels . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2123Postweld Heat Treatment of Tube-to-Tubesheet

Buckling Pin Device in Combination With OtherWelds . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2069

Relief Devices. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2169Precipitation-Hardening Nickel Alloy (UNS N07718)

Copper Nickel Alloy UNS S71640 Tubing . . . . . . . . . . 1868Used as Bolting Material . . . . . . . . . . . . . . . . . . . . . . . . . 1993

ENiCrMo-3 and ERNiCrMo-3 Filler Metal to WeldPrecipitation-Hardening Nickel Alloy (UNS N07718)

S31254, S31703, and S31603 Materials . . . . . . . . . . . 2126Used as Pressure Retaining Component Material. . . . . . 2222

Preci pi tati on-H ardening N i- Cr- Mo A lloy Fe-N i-Cr-M o- N ( CN -3MN ) Cas t M ateri al s for Pressure

Vessels . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2106(UNS N07725) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2217

xv SUPP. 1 BPV



4/28

- -


Furnace Brazing for Lethal Service. . . . . . . . . . . . . . . . . 2249 SA-612/SA-612M Plates . . . . . . . . . . . . . . . . . . . . . . . . . . . 2265

SA-765 Grade IV Forgings . . . . . . . . . . . . . . . . . . . . . . . . . 2242Ni-Al Bronze C95820 Sand Castings for Pressure Ves-

sels. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2230 SA-841 Plate. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2130

17.5Cr-17.5Ni-5.3Si Stainless Steel (UNS S30601). . . . . . 2125Permanent Mold Cast Aluminum Alloys UNS A13560

and A03570. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2239 Sole Use of Metric Units for Pressure Relief Device

Nameplates . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2116Rod and Bar for Heads . . . . . . . . . . . . . . . . . . . . . . . . . . 2155

Rod and Bar for Nozzle Necks . . . . . . . . . . . . . . . . . . . . 2148 3 Chromium-1 Molybdenum-1/4 Vanadium-Columbium-

Calcium Alloy Steel Plates and Forgings . . . . . . . . . . . . 2151Rod and Bar for Shells of Pressure Vessels. . . . . . . . . . 2156

SA-372 Grade L Forgings . . . . . . . . . . . . . . . . . . . . . . . . 2112 3 Chromium-1 Molybdenum-1/4 Vanadium-Titanium-

Boron Alloy Steel Plates and Forgings. . . . . . . . . . . . . . 1961SA-705 Type 630 Forgings (UNS S17400) and SA-

693 Type 630 Plate (UNS S17400). . . . . . . . . . . . . . . 2223 25Cr-22Ni-2Mo-N, UNS S31050, Austenitic Stainless

Steel Forgings. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 203817Cr-7Ni Type 301 (UNS S30100) Plate, Sheet and

Strip for Pressure Vessels . . . . . . . . . . . . . . . . . . . . . . 2092 21/4Chromium-1 Molybdenum Alloy Steel Plates and

Forgings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1960304L Stainless Steel at Elevated Temperatures . . . . . . . 2224

Ultrasonic Examination in Lieu of Radiography . . . . . . 2235 UNS S31803 Plates and Seamless and Welded Pipe and

Tube and Forgings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2067UNS S31803 Plates and Bars in Dimpled or Embossed

Assemblies . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2186 UNS S32550 Plates . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2068

Use ofWeld Joint Examination for Pneumatically Tested

Pressure Vessels . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1518 ASTM A 240-93, 16Cr-4Ni-6Mn, Type 201LN (UNS

S20153) Plate, Sheet, and Strip forWeld Reinforcement at Head-to-Shell Attachments Using

Sketch (k) of Fig. UW-13.1. . . . . . . . . . . . . . . . . . . . . . . 2234 Pressure Vessels . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2123

Buckling Pin Device in Combination With Other

Relief Devices. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2169

17Cr-4Ni-4Cu (UNS S17400) . . . . . . . . . . . . . . . . . . . . . 2277

SA-540 Grade B23, Classes 3 and 4 Alloy SteelSECTION VIII, DIVISION 2

Bolting. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2288PRESSURE VESSELS

Alternative Rules for Design of Ellipsoidal and Torispher-

ical Formed Heads . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2261SECTION VIII, DIVISION 3

Alternative Rules for Qualification of Welding Proce-PRESSURE VESSELS


ASTM A 736 /A 736M-88 and A 859/ A 859M-88a Charpy Impact Test Specimens for SA-508 Grade 4NPlates and Forgings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1932 Classes 1 and 2 Forgings. . . . . . . . . . . . . . . . . . . . . . . . . 2280

Classification of SA-738 Grades A and B for Impact 15Cr-5Ni-3Cu (UNS S15500) SA-705 Type XM-12 Con-Testing. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2263 dition H1100. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Design of Layered Vessels Using Flat Ribbon Wound Cy- SA-540 Grade B24 Classes 3, 4, and 5 Bolting Material . 2282lindrical Shells . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2269

Elevated Temperature Design . . . . . . . . . . . . . . . . . . . . . . . 1489

External Pressure Design of Spheres for Human Occu-SECTION IXpancy. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1952

WELDING QUALIFICATIONSF-Number Grouping for Ni-Cr-Fe, Classification UNS

N06052 Filler Metal. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2142Alternative Rules for Qualification of Welding Proce-

F-Number Grouping for Ni-Cr-Fe, Classification UNSdures for Attachment of Applied Linings . . . . . . . . . . . . 2220

W86152 Welding Electrode. . . . . . . . . . . . . . . . . . . . . . . 2143Electrodes and Fluxes for Submerged Arc Welding SFA-

For Materials in Inventory. . . . . . . . . . . . . . . . . . . . . . . . . . 20535.17 and SFA-5.23 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2141Intermodal Transport Tanks. . . . . . . . . . . . . . . . . . . . . . . . . 2279

F-Number Grouping for Ni-Cr-Fe, Classification UNSModified 214Cr-1Mo-

14V Material . . . . . . . . . . . . . . . . . . . 2098N06052 Filler Metal. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2142

9Cr-1Mo-V Material. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1973F-Number Grouping for Ni-Cr-Fe, Classification UNS

Omission of Lifting Device Requirements for PressureW86152 Welding Electrode. . . . . . . . . . . . . . . . . . . . . . . 2143

Relief Valves on Air, Water Over 140F, or SteamF-Number Grouping for Ni-Cr-Mo, Classification UNS

Service. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2203N06059 Filler Metal. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2251

Precipitation-Hardening Nickel Alloy (UNS N07718)F-Number Grouping for Ni-Cr-Mo, Classification UNS

Used as Bolting Material . . . . . . . . . . . . . . . . . . . . . . . 2206W86059 Welding Electrode. . . . . . . . . . . . . . . . . . . . . . . 2252

Precipitation-Hardening Nickel Alloy (UNS N07718)QW-410.17 Equipment Model for Laser Beam Welding

Used as Pressure Retaining ComponentProcess . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2253

Material. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2222

Precipitation-Hardening Ni-Cr-Mo Alloy

(UNS N07725) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2217

Preheat Requirements for Welding With High-Nickel- SECTION XAlloy Filler Metals Under Article AF-612 . . . . . . . . . . . 2214 FIBERGLASS-REINFORCED PLASTIC

Pressure Vessels With Overpressure Protection by Sys- PRESSURE VESSELStem Design . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2211

Restricting Lift to Achieve Reduced Relieving Capacities Alternative Inspection Requirements for Fiber Reinforced

Plastic Pressure Vessels . . . . . . . . . . . . . . . . . . . . . . . . . . 2225of Full Lift, Nozzle Type, and Flat Seated Safety and

Safety Relief Valves for Compressible and Incompress- Expanded Acceptance Test Temperature Class 2 Fiber Re-

inforced Plastic Pressure Vessels. . . . . . . . . . . . . . . . . . . 2291ible Fluid Applications. . . . . . . . . . . . . . . . . . . . . . . . . . . 1945

xviSUPP. 1 BPV



5/28

- -


Materials for Bodies, Bonnets, Yokes, Housings and SA-372. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2016, 2111, 2112

SA-376. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2096, 2127, 2146Holders of Pressure Relief Devices. . . . . . . . . . . . . . . . . 1750

Sole Use of Metric Units for Pressure Relief Device SA-387. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1961, 1973, 2180

SA-388. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1463, 2155, 2156Nameplates . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2116

Test of Vessels With Ambient Temperature Fluids That SA-395 Class 60-40-18 . . . . . . . . . . . . . . . . . . . . . . . . . . 1939

SA-403. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2146, 2195, 2224, 2255Do Not Meet Design Operating Temperature Tolerance

of RT-620(b). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2266 SA-409. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2033, 2146

SA-426 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2192

SA-450. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1984, 1996, 2026, 2059

SA-455 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2119INDEX OF MATERIAL SPECIFICATIONS

SA-479. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1896, 1953, 2029, 2033

REFERRED TO IN CASES 2125, 2127, 2146, 2186, 2224, 2245

SA-479 Type 304L and 316L . . . . . . . . . . . . . . . . . . . . . 2257ASME SpecificationSA-487 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2073SA-53 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2273SA-508. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1960, 1961, 2151SA-53 Grade E or S. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2255SA-508 Grade 4N, Classes 1 and 2. . . . . . . . . . . . . . . . . 2280SA-53 Type E Grade B . . . . . . . . . . . . . . . . . . . . . . . . . . 2042SA-516 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2255SA-105. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1876, 2255SA-522 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2262SA-106. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1876, 2096, 2255, 2273SA-522 Type I . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2214SA-181 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1876SA-540 Grade B23 Classes 3 and 4 . . . . . . . . . . . . . . . . 2288SA-182. . . . . . . . . . . . . 1467, 1850, 1896, 1953, 1961, 1973, 2033SA-540 Grade B24 Classes 3, 4, and 5 . . . . . . . . . . . . . 22822038, 2067, 2098, 2125, 2146, 2151, 2180, 2195SA-541. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1960, 1961, 2098, 21512224, 2245, 2255SA-542. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1960, 2098SA-182 Grade F11 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1876SA-553 Type I. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2214, 2262SA-182 Grade F12 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2183SA-553 Type II . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2214, 2262SA-182 Grade F22 . . . . . . . . . . . . . . . . . . . . . . . . 1823, 1876, 2127SA-564 Type 630 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2277SA-182 F316L . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2209SA-612 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2265SA-210 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1876SA-645. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2214, 2262SA-213. . . . . . . . . . . . . 1876, 1896, 1953, 1973, 2029, 2033, 2115SA-649. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2122, 2246, 2250, 22832125, 2127, 2146, 2159, 2179, 2180, 2196, 2199, 2224SA-693 Type 630 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2223, 2277SA-213 TP316L . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2209SA-703 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2192SA-216. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1876, 2181SA-705 Type 630 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2223, 2277SA-216 Grades WCA, WCB, and WCC. . . . . . . . . . . . . 2248SA-705 Type XM-12 . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2281SA-217. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1876, 2192SA-731 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2165SA-217 Grades WC-6 and WC-9 . . . . . . . . . . . . . . . . . . 2248SA-738 Grades A and B . . . . . . . . . . . . . . . . . . . . . . . . . 2263SA-234 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2255SA-765 Grade IV . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2242SA-240. . . . . . . . . . . . . . . . . . . . . . . . 1896, 1953, 2029, 2033, 2067SA-789. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2058, 2067, 22452068, 2125, 2127, 2146, 2186, 2195, 2197, 2224, 2245, 2255SA-790. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2067, 2245SA-240 Type 304. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2092SA-815 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2245SA-240 Type 316. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2135SA-832. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2098, 2151SA-240 Type 316L. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2209SA-841 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2130SA-240 Type 316 Ti . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2174SB-43 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2172SA-249. . . . . . . . . . . . . 1896, 1953, 2033, 2125, 2146, 2195, 2224SB-75 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2289SA-249 TP 304. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2231SB-108 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2153, 2239SA-249 TP 304L . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2231SB-111 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1868SA-249 TP 316. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2231SB-160 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2249SA-249 TP 316L . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2231SB-161 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2249SA-250. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1984, 1996, 2026, 2059SB-162 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2249SA-266 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1876SB-163 . . . . . . . . . . . . . 1325, 1500, 1671, 1827, 1987, 2188, 2249SA-268. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2125, 2165SB-164 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1192SA-278 Grades 20, 25, 30, and 35 . . . . . . . . . . . . . . . . . 1849SB-166 . . . . . . . . . . . . . . . . . . . . . . . .1500, 1827, 1880, 1956, 2188SA-312. . . . . . . . . . . . . . . . . . . . . . . . 1896, 1953, 2029, 2033, 2042SB-167 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1500, 1827, 2083, 21882125, 2127, 2146, 2195, 2196, 2224, 2255SB-168 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1500, 1827, 2188SA-312 TP316L . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2209SB-209 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1972SA-333 Grade 6 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2056SB-241 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1972SA-333 Grade 8. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2214, 2262SB-247 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1972SA-334 Grade 8 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2262SB-249 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1750SA-335. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1973, 2179, 2180

SB-265 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2238SA-335 Grades P11 and P22. . . . . . . . . . . . . . . . . . . . . . 1876

SB-265 Grade 1 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2187SA-336. . . . . . . . . . . . . . . . . . .1896, 1961, 2098, 2127, 2151, 2224

SB-283 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2258SA-336 Grades F22 and F22A . . . . . . . . . . . . . . . . . . . . 1876

SB-333 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2140, 2187SA-351 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2244

SB-334 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1585SA-351 Grade CF8M (UNS J92900) . . . . . . . . . . . . . . . 1954

SB-335 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2140, 2187SA-351 Grade CK3MCuN, CN7M, and CD-4MCu. . . . 1750

SB-337 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2238SA-352 Grade LCC . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1750

SB-338 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2149, 2238SA-353. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2214, 2262

SA-358 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2033 SB-348 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2238

xvii SUPP. 1 BPV



6/28

- -


SB-359 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2149, 2272 A 271 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2196

A 314-87 Type 303 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1750SB-366 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1997, 2120, 2140

2162, 2187, 2188, 2226, 2227, 2240, 2249, 2276 A 351-91b. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2106

A 351 Grade CK3MCuN . . . . . . . . . . . . . . . . . . . . . . . . . 1750SB-381 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2238

SB-407 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1325, 1671, 1983, 1987 A 372-90 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2111, 2113

A 480-93. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2123SB-408 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1325, 1987

SB-409 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1325, 1987 A 494-87a Grade CY-40 . . . . . . . . . . . . . . . . . . . . . . . . . 1750

A 494-87a Grade CZ-100 . . . . . . . . . . . . . . . . . . . . . . . . 1750SB-423 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1936, 2218

SB-424 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1936, 2218 A 494-87a Grade M-35 . . . . . . . . . . . . . . . . . . . . . . . . . . 1750

A 513 Grade 1008 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2259SB-425 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2218

SB-435 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2010, 2121, 2162 A 542-82. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1961

A 542-95. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2151SB-443 . . . . . . . . . . . . . . . . . . . . . . . .1409, 1935, 1956, 2217, 2276

SB-444 . . . . . . . . . . . . . . . . . . . . . . . .1409, 1935, 1956, 1982, 2217 A 576-87 Grades 1040, 1042, 1045, and 1117. . . . . . . . 1750

A 649/ A 649M-94. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2122SB-446 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1409, 1935, 2217

SB-462 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1997, 2120 A 743-92a. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2106

A 744-91a. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2106SB-463 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1884

SB-464 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1884 A 744 Grade CK3MCuN. . . . . . . . . . . . . . . . . . . . . . . . . 1750

A 859/ A 859M-88a. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1932SB-468 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1884

SB-515 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1325, 1987 B 16-85. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1750

B 21-83b . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1750SB-516 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2188

SB-517 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2188 B 43. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2172

B 85-84. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1750SB-543 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1868, 2268

SB-564 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1935, 1949, 1956, 1987 B 148-93a . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2230

B 176-79 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17501997, 2134, 2139. 2140, 2162, 2187

2188, 2198, 2217, 2218, 2226, 2227, 2240 B 209. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2019

B 211-88 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1750SB-572 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2010, 2121, 2162

SB-574 . . . . . . . . . . . . . . . . . . . . . . . .1924, 2134, 2198, 2226, 2240 B 283-86 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1750

B 366-81 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1924SB-575 . . . . . . . . . . . . . . . . . . . . . . . .1924, 2134, 2198, 2226, 2240

SB-581 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1860, 2139 B 371-84a . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1750

B 435. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2063SB-582 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1860

SB-584 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2184 B 443. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1409

B 444. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1409SB-619 . . . . . . . . . . . . . . . . . . . . . . . .1860, 1924, 2010, 2134, 2139

2140, 2162, 2187, 2198, 2226, 2227, 2240 B 446. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1409

B 453. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1750SB-622 . . . . . . . . . . . . . . . . . . . . . . . .1860, 1924, 2010, 2134, 2139

2140, 2162, 2187, 2198, 2226, 2227, 2240 B 464. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2120

B 564. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2063SB-625 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2097, 2120, 2139, 2227

SB-626 . . . . . . . . . . . . . . . . . . . . . . . .1860, 1924, 2010, 2198, 2134 B 572. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2063

B 584-88 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17502139, 2140, 2162, 2187, 2226, 2227, 2240

SB-637 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1993, 2206, 2222 B 619. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2063

B 622. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2063SB-649 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2120, 2227

SB-668 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1325, 2189 B 626. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2063

B 673. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2120SB-673 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2120

SB-674 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2120 B 677. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2120

E 112. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2029SB-675 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1997

SB-676 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1997 E 813. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2127

AWS SpecificationSB-677 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2120SB-688 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1997 A5.11 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2143, 2252

A5.14 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2142, 2251SB-690 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1997

SB-691 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1997 A5.17-80. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2141

A5.17-89 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2141SB-704 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2276

SB-705 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2276 A5.23-80. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2141

A5.23-90 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2141SB-709 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1325, 2189

SE-747. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2241

SFA-5.4 Grade 316L-15. . . . . . . . . . . . . . . . . . . . . . . . . . 2209 CHARTS FOR VESSELS UNDER EXTERNAL PRESSURESFA-5.9 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1909, 2127

SFA-5.11 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2115, 2126, 2214 Fig. 1 Chart for Determining Shell Thickness of

Cylindrical and Spherical Vessels Under External Pres-SFA-5.14 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2115, 2126, 2214

SFA-5.17. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2141 sure When Constructed of Solution Annealed Ni-Cr-

Mo-Cb Alloy, Grade 2 N06625. . . . . . . . . . . . . . . . . . . . 1409SFA-5.23. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2141

ASTM Specification Fig. 1 Chart for Determining Shell Thickness of

Cylindrical and Spherical Vessels Under External Pres-A 108-88 Grades 1016, 1018, 1020, 1117, 1118,

1137, 1141, 1215, and 12L14 . . . . . . . . . . . . . . . . . . . 1750 sure When Constructed of Austenitic Stainless Steel

UNS S34565. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2146A 126-84. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1750A 167 Type 301 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2092 Fig. 1 Chart for Determining Thickness of Components

Under External Pressure When Constructed of CopperA 210-86a, Grade C. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2021

A 240-93, Type 201LN . . . . . . . . . . . . . . . . . . . . . . . . . . 2123 Alloy SB-75 UNS C12200 Temper O50 . . . . . . . . . . . . 2289

xviiiSUPP. 1 BPV



7/28

- -

SUBJECT INDEX

Subject CaseSubject CaseSECTION I

Materials for Bodies, Bonnets, Yokes, Housings andPOWER BOILERSHolders of Pressure Relief Devices. . . . . . . . . . . . . . . . . 1750

Miniature Electric Boilers Fabricated of Austenitic Stain-Alloy UNS N06690 Up to 1200F . . . . . . . . . . . . . . . . . . . 2083less Steel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1896Alternative Maximum Allowable Stresses for

Minimum Metal Temperatures of PMB Pressure VesselsSection I Construction Based on a Factor ofDuring Hydrostatic Testing . . . . . . . . . . . . . . . . . . . . . . . 22553.5 on Tensile Strength . . . . . . . . . . . . . . . . . . . . . . . . . . 2284

Modified 9Cr-1Mo-V Cast Material . . . . . . . . . . . . . . . . . . 2192Alternative Rules for Heat Treatment of BoilerNickel-Chromium-Iron (Alloy UNS N06600) . . . . . . . . . . 1827External Piping . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1934Nickel-Chromium-Iron-Aluminum Alloy (Alloy N06601) 1500Alternative Rules for Outside Diameter Tolerance forNickel-Chromium-Molybdenum-Columbium Alloy (UNSPipe . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2237

N06625) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1935Alternative Rules for the Postweld Heat Treatment ofNickel-Iron-Chromium Alloy UNS N08811. . . . . . . . . . . . 1987Finned Tubes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2215Nickel-Iron-Chromium Alloys 800 and 800H (UNSAlternative Rules for Tolerance for Inside Diameter Di-

N08800 and N08810) and Nickel-Iron-Chromium-Mo-mensioned Pipe. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2273lybdenum-Copper Low-Carbon Alloy (UNS N08028). . 1325Attachment of Nozzles or Couplings to a Boiler

Nickel-Iron-Chromium-Molybdenum-Copper Alloy (UNSVessel After Postweld Heat Treatment . . . . . . . . . . . . . . 1918N08825) for Water Wetted Service. . . . . . . . . . . . . . . . . 1936Attachment of Unflanged Tubesheets to the Shell

Nickel-Molybdenum-Chromium Alloy (UNS N10276) . . . 1924of Firetube Boilers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2084

Ni-Cr-Co-Mo Alloy (UNS N06617) . . . . . . . . . . . . . . . . . . 1956Austenitic Stainless Steel Seamless Tube

Ni-Cr-Mo Alloy (UNS N06022) for Code Construction(25Cr-20Ni-Cb-N) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2115

for Temperatures up to 1250F . . . . . . . . . . . . . . . . . . . . 2226Austenitic Stainless Steel Seamless Tubes TP347HFG

Ni-22Cr-14W-2Mo-La Alloy (UNS N06230). . . . . . . . . . . 2063(18Cr-10Ni-Cb). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2159

Precipitation-Hardening Nickel Alloy (UNS N07718)Changeover Valves Installed Between Safety Valves or

Used as Bolting Material . . . . . . . . . . . . . . . . . . . . . . . . . 1993Safety Relief Valves and Boilers. . . . . . . . . . . . . . . . . . . 2254

Pressure Relief Valve Part Conversion by Assemblers . . . 2079Corrosion Resistant Coating of Pressure Relief Valves by

Restricting Lift to Achieve Reduced Relieving Capa-Assemblers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2208

cities of Full Lift, Nozzle Type, Flat Seated Safety andDesign of Safety Valve Connections. . . . . . . . . . . . . . . . . . 1876

Safety Relief Valves. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1923Drilled Holes Not Penetrating Through Vessel Wall . . . . . 1998SA-487 Grade CA6NM Class A . . . . . . . . . . . . . . . . . . . . 207318Cr-Ti Alloy (UNS S43035) . . . . . . . . . . . . . . . . . . . . . . . 2165

Safety Valve Blowdown. . . . . . . . . . . . . . . . . . . . . . . . . . . . 2071Electric Resistance Welded Low Alloy Steel Boiler

and Superheater Tubes . . . . . . . . . . . . . . . . 1984, 1996, 2026, 2059 Seamless 9Cr-2W Material . . . . . . . . . . . . . . . . . . . . . . . . . 2179

Exemption for Attachment Strength Calculations. . . . . . . . 2191 Seamless 12Cr-2W Material . . . . . . . . . . . . . . . . . . . . . . . . 2180

Feedwater Supply for Atmospheric Pressure Circulating Seamless 2.25Cr-1.6W-V-Cb Material . . . . . . . . . . . . . . . . 2199

Fluidized-Bed (ACFB) Boilers . . . . . . . . . . . . . . . . . . . . 2160 Section VIII, Division 1, Unfired Steam Boiler in Section

Fe-22Cr-21Ni-18.5Co-La Alloy UNS R30556 for I System . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1855

Code Construction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2010 Sequencing Water Column Blowdown Valve. . . . . . . . . . . 1912

F-Number Grouping for Ni-Cr-Fe, Classification UNS Sole Use of Metric Units for Pressure Relief Device

N06052 Filler Metal. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2142 Nameplates . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2116

F-Number Grouping for Ni-Cr-Fe, Classification UNS 21Cr-11Ni-N Alloy (UNS S30815) for Code

W86152 Welding Electrode. . . . . . . . . . . . . . . . . . . . . . . 2143 Construction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2033

For Materials in Inventory. . . . . . . . . . . . . . . . . . . . . . . . . . 2053 Use of

Forgings of Nickel-Iron-Chromium Alloys N08800 and B 43 Seamless Red Brass Pipe (UNS C23000) With

N08810 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1949 Drawn General Purpose Temper (H58) for Threaded

46Ni-27Cr-23Fe-2.75 Alloy (UNS N06045). . . . . . . . . . . . 2188 Piping for Construction of PMB and PEB Miniature

Electric Boilers. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2172Gray Cast Iron Castings. . . . . . . . . . . . . . . . . . . . . . . . . . . . 1849Isolating Stop Valve for Power Actuated Pressure Relief Flat Glass Water Gage Assembly Without Shutoff

Valves per PG-60.1.6 . . . . . . . . . . . . . . . . . . . . . . . . . . 2182Valve; Use of Ball Valve in Lieu of OS&Y Valve . . . . 2232

xiii SUPP. 2 BPV


SUPP. #2 Asme BPV Code Cases 1998 BP9802$FM3 12-07-98 07:44:30


8/28


SA-182, Grade F12, Class 1 Forged or Rolled Alloy- Austenitic Stainless Steel Type 316 Ti Less Than316in. Thickness in Hot Water Heating Boilers atSteel Pipe Flanges, Forged Fittings and Valves, and

Parts for High-Temperature Service . . . . . . . . . . . . . . 2183 MAWP of 80 psi . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2174

Flared Tubing Fittings for Attachment of Watertubes . . 2258SA-333, Grade 6 Seamless and Welded Steel

Pipe . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2056 SA-249 Tubes in Firetube Hot Water Heating or Hot

Water Supply Boilers. . . . . . . . . . . . . . . . . . . . . . . . . . 2231Watertube-to-Tubesheet Attachment Welds . . . . . . . . . . . . 2086

Welded Pipe as the Shell of a Boiler . . . . . . . . . . . . . . . . . 2042 Semi-Permanent Mold Cast Aluminum Alloy A356.0

for the Manufacture of Heating Boilers UnderWeld Joints Between Materials of Unequal Thickness for

Steam Drums and Mud Drums . . . . . . . . . . . . . . . . . . . . 2210 Part HC. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2153

UNS C90300 Material for Copper Alloy Sand

Castings. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2184

Valve Markings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2256

SECTION IIMATERIAL SPECIFICATIONS PART A

Nondestructive Examination As an Alternative to

Hydrostatic Testing for SA-376. . . . . . . . . . . . . . . . . . . . 2096SECTION V

NONDESTRUCTIVE EXAMINATION

SECTION II Evaluation of Nonrelevant and Geometric Reflectors . . . . 2275

MATERIAL SPECIFICATIONS PART B Use of Wire IQIs Manufactured in Accordance With Ear-

lier Editions of SE-747. . . . . . . . . . . . . . . . . . . . . . . . . . . 2241No Cases

SECTION IISECTION VIII, DIVISION 1WELDING SPECIFICATIONS PART C

PRESSURE VESSELS

No CasesA 439 Type D-2 Austenitic Ductile Iron . . . . . . . . . . . . . . 2093

Alloy UNS N08810 Up to 1800F . . . . . . . . . . . . . . . . . . . 1983

Alternate Rules for Heat Treatment of Repair Welds toSECTION II Castings. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2205

MATERIAL PROPERTIES PART D Alternative Maximum Allowable Stresses Based

on a Factor of 3.5 on Tensile Strength . . . . . . . . . . . . . . 2290Alternative Maximum Allowable Stresses

Alternative Method for Calculating Maximum AllowableBased on a Factor of 3.5 on Tensile Strength . . . . . . . . 2290

Stresses Based on a Factor of 3.5 on Tensile Strength . 2278Alternative Method for Calculating Maximum Allowable

Alternative Method to Area Replacement Rules for Open-Stresses Based on a Factor of 3.5 on Tensile Strength . 2278

ings Under Internal Pressure . . . . . . . . . . . . . . . . . . . . . . 2168

Alternative Pressure Test Procedure to

UG-99 and UG-100 for the Construction of

Multistream Aluminum Vacuum BrazedSECTION IVPlate-Fin Heat Exchangers. . . . . . . . . . . . . . . . . . . . . . . . 2247HEATING BOILERS

Alternative Requirements for Seal Welding of Threaded

Connections, UF-32(b). . . . . . . . . . . . . . . . . . . . . . . . . . . 2016Alternative Attachments of Fire Tubes

to Tube Sheets Greater Than 516 in. Thick. . . . . . . . . . . 2294 Alternative Rules for Design of Ellipsoidal and

Torispherical Formed Heads . . . . . . . . . . . . . . . . . . . . . . 2260Alternative Nameplate Stamping Letter Size . . . . . . . . . . . 2193Depth of Bevel for Firetubes Attached by Welding, Alternative Rules for Determining Allowable Compres-

sive Stresses for Cylinders, Cones, Spheres, andHW-713(a) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2285

F-N um ber G rouping f or N i-Cr- Fe, Classi fi cation UN S Form ed Heads. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2286

Alternative Rules for Qualification of Welding Proce-N06052 Filler Metal. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2142

F-Number Grouping for Ni-Cr-Fe, Classification UNS dures for Attachment of Applied Linings . . . . . . . . . . . . 2220

Alternatives to Appendix 1-7(b) . . . . . . . . . . . . . . . . . . . . . 2236W86152 Welding Electrode. . . . . . . . . . . . . . . . . . . . . . . 2143

For Materials in Inventory . . . . . . . . . . . . . . . . . . . . . . . . . . 2053 Aluminum Alloy 3003-H24 for Code Construction . . . . . . 2019

ASTM A 372-90, Quenched and Tempered Type V,Insulation Attachment Pins . . . . . . . . . . . . . . . . . . . . . . . . . 2132

Integrally Finned Tube Testing, HF-204.1 . . . . . . . . . . . . . 2154 Grades 1 and 5 Class 65 and Type IX, Classes A

and B Forgings. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2111Sole Use of Metric Units for Pressure Relief Device

Nameplates . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2116 ASTM A 372-90, Type V, Grades 1 and 5, Class 65

Types VII and IX, Classes A and B Forgings . . . . . . . . 2113Use of

A 513 ERW Low Carbon Steel Mechanical Tube in A STM A 736/ A 736M- 88 and A 859/ A 859M- 88a

Plates and Forgings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1932Water Heater Construction. . . . . . . . . . . . . . . . . . . . . . 2262

Austenitic Stainless Steel Type 304L and 316L Specifi- Austenitic Ni-Cr-Mo-Nb Alloy (UNS N06626) . . . . . . . . . 2276

Austenitic Stainless Steel, 18Cr-20Ni-5.5Si, UNS S32615cation SA-479 Bars and Stays in Hot Water Heating

Boilers. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2257 Construction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2029Austenitic Stainless Steel Seamless Tubes and PipeAustenitic Stainless Steel TP 316 Ti Less than 316In.

Thickness in Hot Water Heating Boilers . . . . . . . . . . 2135 18Cr-11Ni-Cb--N (UNS S34751) . . . . . . . . . . . . . . . . . . 2196

xivSUPP. 2 BPV




9/28


Austenitic Ni-Cr-Mo-W Alloy (UNS N06686). . . . . . . . . . 2198 Nonreclosing Pressure Relief Devices. . . . . . . . . . . . . . . . . 2091

Buckling Pin Nonreclosing Pilot Operated Pressure Re- Omission of Lifting Device Requirements for Pressure

lief Device. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2267 Relief Valves on Air, Water Over 140F, or Steam

Classification of SA-738, Grades A and B Service. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2203

Material for Impact Testing. . . . . . . . . . . . . . . . . . . . . . . 2213 Permissible Tolerance for Hemispherical or 2:1 Ellipsoi-

Copper Alloy Tube Conforming to SB-75 UNS C12200 dal Heads on Glass-Lined Vessels. . . . . . . . . . . . . . . . . . 2219

Temper O50 for External Pressure Use Up To and In- Pneumatic Testing of Pressure Vessels, UG-20 . . . . . . . . . 2055

cluding 400F . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2289 Pneumatic Testing of Pressure Vessels, UG-90(c)(2) . . . . 2046

Corrosion Resistant Coating of Pressure Relief Valves by Postponement of Mandatory Date for Compliance With

Assemblers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2208 Rupture Disk Device Requirements. . . . . . . . . . . . . . . . . 2287

Co-26Cr-9Ni-5Mo-3Fe-2W Alloy (UNS R31233) . . . . . . . 2121 Postweld Heat Treatment of Tube-to-Tubesheet

Design of Layered Vessels Using Flat Ribbon Wound Cy- Welds . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2069

lindrical Shells . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2229 Precipitation-Hardening Nickel Alloy (UNS N07718)18Cr-15Ni-4Si Stainless Steel, UNS S30600 . . . . . . . . . . . 1953 Used as Bolting Material . . . . . . . . . . . . . . . . . . . . . . . . . 1993

18.5Cr-15.5Ni-4.5Mo-N Alloy (UNS S31726). . . . . . . . . . 2197 Precipitation-Hardening Nickel Alloy (UNS N07718)

External Design Pressure Rating of SB-359 Copper and Used as Pressure Retaining Component Material. . . . . . 2222

Copper Alloy Heat Exchanger Tubes With Integral Precipitation-Hardening Ni-Cr-Mo AlloyFins . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2272 (UNS N07725) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2217

External Pressure Design for Titanium Alloy Seamless Precipitation-Hardening Ni-Fe-Cr Alloy (UNS N09925). . 2218and Welded Condenser and Heat Exchanger Tubes Pressure Relief Valve Part Conversion by(SB-338) With Integral Fins . . . . . . . . . . . . . . . . . . . . . . 2149 Assemblers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2079

External Pressure Design of Spheres for Human Occu- Pressure Vessels With Overpressure Protection by Sys-pancy. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1952 tem Design . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2211

F-Number Grouping for Ni-Cr-Fe, Classification UNS Requirements forN06052 Filler Metal. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2142 Welder Identification Stamping on Aluminum

F-Number Grouping for Ni-Cr-Fe, Classification UNS Materials . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1972W86152 Welding Electrode. . . . . . . . . . . . . . . . . . . . . . . 2143 Welder Identification Stamping on Carbon Steel

For Materials in Inventory. . . . . . . . . . . . . . . . . . . . . . . . . . 2053 Materials . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1971Forged Rolls for Corrugating Paper Machinery . . . . . . . . . 2246 Restricting Lift to Achieve Reduced Relieving Capacities

Forged Trunnions for Corrugating Paper Machinery . . . . . 2250 of Full Lift, Nozzle Type, and Flat Seated Safety and46Ni-27Cr-23Fe-2.75Si Alloy (UNS N06045) . . . . . . . . . . 2188 Safety Relief Valves for Compressible and IncomeImpact Test Requirements for Cast Steel Split Loose pressibleFluid Applications . . . . . . . . . . . . . . . . . . . . . . . 1945

Flanges for Glass Lined Vessels . . . . . . . . . . . . . . . . . . . 2181 SA-395 Class 60-40-18 Welded Ferritic DuctileImpact Tests per Paragraph UHA-51 for Glass Lined (Nodular) Cast Iron . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1939

316L Stainless Steel Vessels . . . . . . . . . . . . . . . . . . . . . . 2209 SA-765 Grade IV Forgings . . . . . . . . . . . . . . . . . . . . . . . . . 2242Large-end Cone-to-Cylinder Junction for 30 < 60 SA-789, UNS S32304, With Higher Tensile Require-

Degrees . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2150 ments. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2058Laser Welding of Lap Joints . . . . . . . . . . . . . . . . . . . . . . . . 2018 SA-841 Plate. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2130Local Thin Area in Cylindrical Shell . . . . . . . . . . . . . . . . . 2243 17.5Cr-17.5Ni-5.3Si Stainless Steel (UNS S30601). . . . . . 2125Low Carbon-Nickel-Chromium-Molybdenum Alloy UNS Size Limits for Forged Rolls for Corrugating Paper Ma-

N06059 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2134 chinery. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2283Materials for Bodies, Bonnets, Yokes, Housings and Sole Use of Metric Units for Pressure Relief Device

Holders of Pressure Relief Devices. . . . . . . . . . . . . . . . . 1750 Nameplates . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2116Materials in Inventory . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2248 31Ni-31Fe-29Cr-Mo-Cu-Low C (UNS N08028) . . . . . . . . 2189Modified 214Cr-1Mo-

14V Material . . . . . . . . . . . . . . . . . . . 2098 33Cr-31Ni-1.5Mo-0.6Cu-N Austenitic Stainless SteelNickel-Chromium-Iron-Aluminum Alloy (Alloy (UNS R20033) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2227

N06601) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1500 3 Chromium-1 Molybdenum-1/4 Vanadium-Columbium-Nickel-Chromium-Molybdenum-Columbium Alloy Calcium Alloy Steel Plates and Forgings . . . . . . . . . . . . 2151

N06625 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1409 3 Chromium-1 Molybdenum-1/4 Vanadium-Titanium-Nickel-Iron-Chromium Alloy UNS N08811. . . . . . . . . . . . 1987 Boron Alloy Steel Plates and Forgings. . . . . . . . . . . . . . 1961Nickel-Iron-Chromium-Molybdenum-Copper Tube Wall Thickness for Air Cooled and Cooling Tower

Low Carbon Alloy (UNS N08031) for Code Heat Exchangers. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2157Construction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2139 25Cr-7.5Ni-3.5Mo-N-Cu-W Alloy, UNS S32760, Forg-

Nickel-Iron-Chromium-Molybdenum-Copper Low Car- ings, Plate, Sheet, Strip, Bar, Seamless and Weldedbon Alloy (UNS N08926) for Code Construction . . . . . 2120 Pipe and Tube, and Fittings. . . . . . . . . . . . . . . . . . . . . . . 2245

Ni-30Co-28Cr-2.75Si Alloy (UNS N12160) for Code 25Cr-22Ni-2Mo-N, UNS S31050, Austenitic StainlessConstruction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2162 Steel Forgings. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2038

Ni-Cr-Co-Mo Alloy (UNS N06617) . . . . . . . . . . . . . . . . . . 1956 24Cr-17Ni-6Mn-4.5Mo-N, UNS S34565, Austenitic Stain-Ni-Cr-Co-Mo Alloy (N06617) Pipe and Tube . . . . . . . . . . 1982 less Steel Forgings, Bar, Fittings Welded and SeamlessNi-22Cr-14W-2Mo-La Alloy (UNS N06230). . . . . . . . . . . 2063 Pipe and Tube, Plate, Sheet, and Strip . . . . . . . . . . . . . . 2146Ni-Cu-Al Bolting Material, SB-164 Modified . . . . . . . . . . 1192 24.5Cr-22Ni-7.5Mo-3Mn-N Austenitic Stainless SteelNi-Fe-Cr Alloy N08801 . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1671 (UNS S32654) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2195Ni-Fe-Cr-Mo Alloy N08932 Plates . . . . . . . . . . . . . . . . . . . 2097 29Cr-6-5Ni-2Mo-N Austenitic-Ferritic

Ni-23Cr-16Mo-1.6Cu Alloy (UNS N06200). . . . . . . . . . . . 2240 Stainless Steel UNS S32906 . . . . . . . . . . . . . . . . . . . . . . 2295Ni-28Mo-3Fe-1.3Cr-0.25Al Alloy (UNS N10629). . . . . . . 2187 21/4 Chromium-1 Molybdenum Alloy Steel Plates and

Forgings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1960Ni-29.5Mo-2Cr-2Fe-Mn-W Alloy (UNS N10675). . . . . . . 2140

xv SUPP. 2 BPV




10/28


Type 304LN (Alloy UNS S30453) Austenitic Stainless F-Number Grouping for Ni-Cr-Fe, Classification UNS

W86152 Welding Electrode. . . . . . . . . . . . . . . . . . . . . . . 2143Steel. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2127

ULT Allowable Stresses for Nickel Steels . . . . . . . . . . . . . 2262 For Materials in Inventory . . . . . . . . . . . . . . . . . . . . . . . . . . 2053

Intermodal Transport Tanks. . . . . . . . . . . . . . . . . . . . . . . . . 2279Unfired Steam Boiler in Section I System . . . . . . . . . . . . . 1855

UNS J93380 (CD3MWCuN). . . . . . . . . . . . . . . . . . . . . . . . 2244 Modified 214Cr-1Mo-14V Material . . . . . . . . . . . . . . . . . . . 2098

9Cr-1Mo-V Material. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1973UNS N08367 Material . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1997

Use of Omission of Lifting Device Requirements for Pressure

Relief Valves on Air, Water Over 140F, or SteamAcoustic Emission Examination in Lieu of

Radiography . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1968 Service. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2203

Precipitation-Hardening Nickel Alloy (UNS N07718)Annealed C12200 Alloy Welded Tubing . . . . . . . . . . . . 2268

ASTM A 240-93, 16Cr- 4N i- 6M n, Type 201LN (U NS U sed as Bol ti ng M at eri al . . . . . . . . . . . . . . . . . . . . . . . 2206

Precipitation-Hardening Nickel Alloy (UNS N07718)S20153) Plate, Sheet, and Strip for Pressure

Vessels . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2123 Used as Pressure Retaining ComponentMaterial. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2222Buckling Pin Device in Combination With Other

Relief Devices. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2169 Precipitation-Hardening Ni-Cr-Mo Alloy

(UNS N07725) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2217Copper Nickel Alloy UNS S71640 Tubing . . . . . . . . . . 1868

ENiCrMo-3 and ERNiCrMo-3 Filler Metal to Weld Preheat Requirements for Welding With High-Nickel-

Alloy Filler Metals Under Article AF-612 . . . . . . . . . . . 2214S31254, S31703, and S31603 Materials . . . . . . . . . . . 2126

Fe-Ni-Cr-Mo-N (CN-3MN) Cast Materials for Pressure Pressure Vessels With Overpressure Protection by Sys-

tem Design . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2211Vessels . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2106

Furnace Brazing for Lethal Service. . . . . . . . . . . . . . . . . 2249 Restricting Lift to Achieve Reduced Relieving Capacities

of Full Lift, Nozzle Type, and Flat Seated Safety andNi-Al Bronze C95820 Sand Castings for Pressure Ves-

sels. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2230 Safety Relief Valves for Compressible and Incompress-

ible Fluid Applications. . . . . . . . . . . . . . . . . . . . . . . . . . . 1945Permanent Mold Cast Aluminum Alloys UNS A13560

and A03570. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2239 SA-193 Grade B8 Class 2 Bolting Material . . . . . . . . . . . . 2293

SA-612/SA-612M Plates . . . . . . . . . . . . . . . . . . . . . . . . . . . 2265Rod and Bar for Heads . . . . . . . . . . . . . . . . . . . . . . . . . . 2155

Rod and Bar for Nozzle Necks . . . . . . . . . . . . . . . . . . . . 2148 SA-765 Grade IV Forgings . . . . . . . . . . . . . . . . . . . . . . . . . 2242

SA-841 Plate. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2130Rod and Bar for Shells of Pressure Vessels . . . . . . . . . . 2156

SA-372 Grade L Forgings . . . . . . . . . . . . . . . . . . . . . . . . 2112 17.5Cr-17.5Ni-5.3Si Stainless Steel (UNS S30601). . . . . . 2125

Sole Use of Metric Units for Pressure Relief DeviceSA-705 Type 630 Forgings (UNS S17400) and SA-693 Type 630 Plate (UNS S17400). . . . . . . . . . . . . . . 2223 Nameplates . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2116

3 Chromium-1 Molybdenum-1/4 Vanadium-Columbium-17Cr-7Ni Type 301 (UNS S30100) Plate, Sheet and

Strip for Pressure Vessels . . . . . . . . . . . . . . . . . . . . . . 2092 Calcium Alloy Steel Plates and Forgings . . . . . . . . . . . . 2151

3 Chromium-1 Molybdenum-1/4 Vanadium-Titanium-304L Stainless Steel at Elevated Temperatures . . . . . . . 2224

Ultrasonic Examination in Lieu of Radiography . . . . . . 2235 Boron Alloy Steel Plates and Forgings. . . . . . . . . . . . . . 1961

25Cr-22Ni-2Mo-N, UNS S31050, Austenitic StainlessUNS S31803 Plates and Bars in Dimpled or Embossed

Assemblies . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2186 Steel Forgings. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2038

21/4Chromium-1 Molybdenum Alloy Steel Plates andWeld Joint Examination for Pneumatically Tested

Pressure Vessels . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1518 Forgings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1960

UNS S31803 Plates and Seamless and Welded Pipe andWeld Reinforcement at Head-to-Shell Attachments Using

Sketch (k) of Fig. UW-13.1. . . . . . . . . . . . . . . . . . . . . . . 2234 Tube and Forgings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2067

UNS S32550 Plates . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2068

Use of

ASTM A 240-93, 16Cr-4Ni-6Mn, Type 201LN (UNS

S20153) Plate, Sheet, and Strip for

Pressure Vessels . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2123SECTION VIII, DIVISION 2

Buckling Pin Device in Combination With OtherPRESSURE VESSELSRelief Devices. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2169

17Cr-4Ni-4Cu (UNS S17400) . . . . . . . . . . . . . . . . . . . . . 2277Alternative Rules for Design of Ellipsoidal and Torispher-SA-540 Grade B23, Classes 3 and 4 Alloy Steelical Formed Heads . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2261

Bolting. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2288Alternative Rules for Determining Allowable

Compressive Stresses for Cylinders, Cones, Spheres,

and Formed Heads . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2286

Alternative Rules for Qualification of Welding Proce-


ASTM A 736 /A 736M-88 and A 859/ A 859M-88a

Plates and Forgings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1932

Classification of SA-738 Grades A and B for Impact

Testing. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2263 SECTION VIII, DIVISION 3Design of Layered Vessels Using Flat Ribbon Wound Cy- PRESSURE VESSELS

lindrical Shells . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2269

Elevated Temperature Design . . . . . . . . . . . . . . . . . . . . . . . 1489 Charpy Impact Test Specimens for SA-508 Grade 4N

Classes 1 and 2 Forgings. . . . . . . . . . . . . . . . . . . . . . . . . 2280External Pressure Design of Spheres for Human Occu-

pancy. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1952 15Cr-5Ni-3Cu (UNS S15500) SA-705 Type XM-12 Con-dition H1100. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .F-Number Grouping for Ni-Cr-Fe, Classification UNS

N06052 Filler Metal. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2142 SA-540 Grade B24 Classes 3, 4, and 5 Bolting Material . 2282

xviSUPP. 2 BPV




11/28


SECTION IX SA-234 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2255

WELDING QUALIFICATIONS SA-240. . . . . . . . . . . . . . . . . . . . . . . . 1896, 1953, 2029, 2033, 2067

2068, 2125, 2127, 2146, 2186, 2195, 2197, 2224, 2245, 2255Alternative Rules for Qualification of Welding Proce- SA-240 Type 304 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2092

dures for Attachment of Applied Linings . . . . . . . . . . . . 2220 SA-240 Type 316 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2135Electrodes and Fluxes for Submerged Arc Welding SFA- SA-240 Type 316L. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2209

5.17 and SFA-5.23 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2141 SA-240 Type 316 Ti . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2174F-Number Grouping for Ni-Cr-Fe, Classification UNS SA-249. . . . . . . . . . . . . 1896, 1953, 2033, 2125, 2146, 2195, 2224

N06052 Filler Metal. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2142 SA-249 TP 304. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2231F-Number Grouping for Ni-Cr-Fe, Classification UNS SA-249 TP 304L . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2231

W86152 Welding Electrode. . . . . . . . . . . . . . . . . . . . . . . 2143 SA-249 TP 316. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2231F-Number Grouping for Ni-Cr-Mo, Classification UNS SA-249 TP 316L . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2231

N06059 Filler Metal. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2251 SA-250. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1984, 1996, 2026, 2059F-Number Grouping for Ni-Cr-Mo, Classification UNS

SA-266 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1876W86059 Welding Electrode. . . . . . . . . . . . . . . . . . . . . . . 2252

SA-268. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2125, 2165QW-410.17 Equipment Model for Laser Beam Welding

SA-278 Grades 20, 25, 30, and 35 . . . . . . . . . . . . . . . . . 1849Process . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2253

SA-312. . . . . . . . . . . . . . . . . . . . . . . . 1896, 1953, 2029, 2033, 2042

2125, 2127, 2146, 2195, 2196, 2224, 2255

SA-312 TP316L . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2209

SA-333 Grade 6 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2056

SA-333 Grade 8. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2214, 2262SECTION X SA-334 Grade 8 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2262

FIBERGLASS-REINFORCED PLASTIC SA-335. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1973, 2179, 2180PRESSURE VESSELS SA-335 Grades P11 and P22. . . . . . . . . . . . . . . . . . . . . . 1876

SA-336. . . . . . . . . . . . . . . . . . .1896, 1961, 2098, 2127, 2151, 2224Alternative Inspection Requirements for Fiber Reinforced

SA-336 Grades F22 and F22A . . . . . . . . . . . . . . . . . . . . 1876Plastic Pressure Vessels . . . . . . . . . . . . . . . . . . . . . . . . . . 2225

SA-351 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2244Expanded Acceptance Test Temperature Class 2 Fiber Re-

SA-351 Grade CK3MCuN, CN7M, and CD-4MCu. . . . 1750inforced Plastic Pressure Vessels. . . . . . . . . . . . . . . . . . . 2291

SA-352 Grade LCC . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1750Materials for Bodies, Bonnets, Yokes, Housings and SA-353. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2214, 2262

Holders of Pressure Relief Devices. . . . . . . . . . . . . . . . . 1750SA-358 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2033

Sole Use of Metric Units for Pressure Relief DeviceSA-372. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2016, 2111, 2112

Nameplates . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2116SA-376. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2096, 2127, 2146

Test of Vessels With Ambient Temperature Fluids ThatSA-387. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1961, 1973, 2180

Do Not Meet Design Operating Temperature ToleranceSA-388. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1463, 2155, 2156

of RT-620(b). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2266SA-395 Class 60-40-18 . . . . . . . . . . . . . . . . . . . . . . . . . . 1939

SA-403. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2146, 2195, 2224, 2255

SA-409. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2033, 2146

SA-426 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2192

SA-450. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1984, 1996, 2026, 2059INDEX OF MATERIAL SPECIFICATIONS SA-455 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2119

REFERRED TO IN CASES SA-479. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1896, 1953, 2029, 2033

2125, 2127, 2146, 2186, 2224, 2245, 2295ASME Specification

SA-479 Type 304L and 316L . . . . . . . . . . . . . . . . . . . . . 2257SA-53 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2273

SA-487 . .

Asme Ccase Subject

Documents

Transcript of Asme Ccase Subject