ASFIL60156 · 2021. 2. 5. · 1 1 edt-91200 3" triclover clamp 2 1 edt-20820 hose clamp 7/16 - 1" 3...
6
THIS DOCUMENT IS THE EXCLUSIVE PROPERTY OF DL-TECH INC. AND MAY NOT BE USED OR REPRODUCED, NOR ITS CONTENT OR PART THERE OF BE DISCUSSED TO OTHER BY ANY PERSON OR COMPANY WITHOUT THE EXPRESS CONSENT IN WRITING FROM DL-TECH INC. DRAWN BY: CHECKED BY: MATERIAL: MAT'L TREATMENT: 188 ONEIDA DRIVE TEL: (514) 694-3439 POINTE CLAIRE , QUEBEC FAX: (514) 694-4107 CANADA H9R 1A8 EMAIL: [email protected] TITLE: MACHINE: DECIMALS / DECIMAUX: .xx ± .01 DECIMALS / DECIMAUX: .xxx ± .002 FRACTIONS / FRACTIONS: ± 1/32 ANGULAR / ANGULAIRE: ± 0.5° BREAK ALL SHARP EDGES / BRISER TOUTES LES ARRETES DWG NO: REV: MAT'L #: DATE: SHEET: OF QTY / MACHINE: Alex 20/04/2007 12LT PUMPASS'Y WITH 1 1/2" SANITARY FITTINGS ASFIL60156 1 1 1 Parts List TITLE PART NUMBER QTY ITEM 3" TRICLOVER CLAMP EDT-91200 1 1 HOSE CLAMP 7/16 - 1" EDT-20820 1 2 HOSE CLAMP 11/16 - 1.5" EDT-20821 1 3 TRICLOVER SEAL 3" BUNA EDT-91004B 1 5 POLYPACK U CUP BUNA EDT-91003B 1 6 TRICLAMP 1 1/2" CLAMP FIL333 2 7 Tri Clover Seal 1 1/2" BUNA N EDT-91105B 2 8 5/8'' Ferrule fitting 1-1/2" try-clamp FIL65821 1 10 1" DIA FERRULE FITTING FIL68304 1 11 12L GEAR ACETRON GP, NATURAL FIL74249 2 12 Parts List TITLE PART NUMBER QTY ITEM SHAFT BUSHING SHORT EDT-51-25-010A 3 200 SHAFT BUSHING LONG EDT-51-25-010B 1 201 2" TRICLOVER CLAMP EDT-91201 1 4.1 GEAR CHAMBER EDT-51-25-005 1 4.2 FERRULE .812" OD for pump and nozzle body FIL65820 2 9.1 PUMP BODY (12L) EDT-51-25-001 1 9.2 Bushing Holder Insert EDT-51-25-004 2 9.3 Engraved Curved End Plate EDT-51-25-006 1 9.4 DRIVE SHAFT (12L) EDT-51-25-008 1 9.5 IDLER SHAFT (12L) EDT-51-25-009 1 9.6 1 EDT-91200 9.4 EDT-51-25-006 5 EDT-91004B 9.3 EDT-51-25-004 200 EDT-51-25-010A 9.6 EDT-51-25-009 12 FIL74249 9.5 EDT-51-25-008 4.2 EDT-51-25-005 201 EDT-51-25-010B 2 EDT-20820 7 FIL333 9.2 EDT-51-25-001 7 FIL333 8 EDT-91105B 11 FIL68304 3 EDT-20821 9.3 EDT-51-25-004 200 EDT-51-25-010A 6 EDT-91003B 200 EDT-51-25-010A 10 FIL65821 4.1 EDT-91201 9.1 FIL65820
Transcript of ASFIL60156 · 2021. 2. 5. · 1 1 edt-91200 3" triclover clamp 2 1 edt-20820 hose clamp 7/16 - 1" 3...
THIS DOCUMENT IS THE EXCLUSIVE PROPERTY OF DL-TECH INC. AND MAY NOT BE USED OR REPRODUCED, NOR ITS CONTENT OR PART THERE OF BE DISCUSSED TO OTHER BY ANY PERSON OR COMPANY WITHOUT THE EXPRESS CONSENT IN WRITING FROM DL-TECH INC.
DRAWN BY: CHECKED BY: MATERIAL:
MAT'L TREATMENT:188 ONEIDA DRIVE TEL: (514) 694-3439POINTE CLAIRE , QUEBEC FAX: (514) 694-4107CANADA H9R 1A8 EMAIL: [email protected]
TITLE:
MACHINE:
DECIMALS / DECIMAUX: .xx ± .01DECIMALS / DECIMAUX: .xxx ± .002FRACTIONS / FRACTIONS: ± 1/32ANGULAR / ANGULAIRE: ± 0.5°BREAK ALL SHARP EDGES / BRISER TOUTES LES ARRETES
DWG NO: REV:
MAT'L #:
DATE: SHEET:OF
QTY / MACHINE: Alex 20/04/2007
12LT PUMPASS'Y WITH 1 1/2" SANITARY FITTINGS
ASFIL60156 1
1 1
Parts ListTITLEPART NUMBERQTYITEM
3" TRICLOVER CLAMPEDT-9120011HOSE CLAMP 7/16 - 1"EDT-2082012
HOSE CLAMP 11/16 - 1.5"EDT-2082113TRICLOVER SEAL 3" BUNAEDT-91004B15
POLYPACK U CUP BUNAEDT-91003B16TRICLAMP 1 1/2" CLAMPFIL33327
Tri Clover Seal 1 1/2" BUNA NEDT-91105B285/8'' Ferrule fitting 1-1/2" try-clampFIL65821110
1" DIA FERRULE FITTINGFIL6830411112L GEAR ACETRON GP, NATURALFIL74249212
Parts ListTITLEPART NUMBERQTYITEM
SHAFT BUSHING SHORTEDT-51-25-010A3200
SHAFT BUSHING LONGEDT-51-25-010B1201
2" TRICLOVER CLAMPEDT-9120114.1GEAR CHAMBEREDT-51-25-00514.2FERRULE .812" OD for pump and nozzle bodyFIL6582029.1
PUMP BODY (12L)EDT-51-25-00119.2Bushing Holder InsertEDT-51-25-00429.3Engraved Curved End PlateEDT-51-25-00619.4DRIVE SHAFT (12L)EDT-51-25-00819.5
IDLER SHAFT (12L)EDT-51-25-00919.6
1EDT-91200
9.4EDT-51-25-006
5EDT-91004B
9.3EDT-51-25-004
200EDT-51-25-010A
9.6EDT-51-25-009
12FIL74249
9.5EDT-51-25-008
4.2EDT-51-25-005
201EDT-51-25-010B
2EDT-20820 7
FIL333
9.2EDT-51-25-001
7FIL333
8EDT-91105B
11FIL68304
3EDT-20821
9.3EDT-51-25-004
200EDT-51-25-010A
6EDT-91003B
200EDT-51-25-010A
10FIL65821
4.1EDT-91201
9.1FIL65820
THIS DOCUMENT IS THE EXCLUSIVE PROPERTY OF DL-TECH INC. AND MAY NOT BE USED OR REPRODUCED, NOR ITS CONTENT OR PART THERE OF BE DISCUSSED TO OTHER BY ANY PERSON OR COMPANY WITHOUT THE EXPRESS CONSENT IN WRITING FROM DL-TECH INC.
DRAWN BY: CHECKED BY: MATERIAL:
MAT'L TREATMENT:188 ONEIDA DRIVE TEL: (514) 694-3439POINTE CLAIRE , QUEBEC FAX: (514) 694-4107CANADA H9R 1A8 EMAIL: [email protected]
TITLE:
MACHINE:
DECIMALS / DECIMAUX: .xx ± .01DECIMALS / DECIMAUX: .xxx ± .002FRACTIONS / FRACTIONS: ± 1/32ANGULAR / ANGULAIRE: ± 0.5°BREAK ALL SHARP EDGES / BRISER TOUTES LES ARRETES
DWG NO: REV:
MAT'L #:
DATE: SHEET:OF
QTY / MACHINE: Alex 15/12/2014
12LT PUMPASS'Y WITH 1 1/2" SANITARY FITTINGS
ASFIL60156-6L 1
1 1
Parts ListTITLEPART NUMBERQTYITEM
3" TRICLOVER CLAMPEDT-9120011HOSE CLAMP 7/16 - 1"EDT-2082012HOSE CLAMP 11/16 - 1.5"EDT-2082113TRICLOVER SEAL 3" BUNAEDT-91004B15POLYPACK U CUP BUNAEDT-91003B16TRICLAMP 1 1/2" CLAMPFIL33327Tri Clover Seal 1 1/2" BUNA NEDT-91105B285/8'' Ferrule fitting 1-1/2" try-clampFIL658211101" DIA FERRULE FITTINGFIL68304111
SPCER FOR 6L PUMPFIL98963423
Parts ListTITLEPART NUMBERQTYITEM
SHAFT BUSHING SHORTEDT-51-25-010A3200SHAFT BUSHING LONGEDT-51-25-010B1201
2" TRICLOVER CLAMPEDT-9120114.1
GEAR CHAMBEREDT-51-25-00514.2
FERRULE .812" OD for pump and nozzle bodyFIL6582029.1
PUMP BODY (12L)EDT-51-25-00119.2
Bushing Holder InsertEDT-51-25-00429.3Engraved Curved End PlateEDT-51-25-00619.4
DRIVE SHAFT (12L)EDT-51-25-00819.5
IDLER SHAFT (12L)EDT-51-25-00919.6
TEFLON GEAR 6LEDT-51-25-0432100SPCER FOR 6L PUMPFIL98963423
1EDT-91200
9.4EDT-51-25-006
5EDT-91004B
9.3EDT-51-25-004
200EDT-51-25-010A
9.6EDT-51-25-009
9.5EDT-51-25-008
4.2EDT-51-25-005
201EDT-51-25-010B
2EDT-20820 7
FIL333
9.2EDT-51-25-001
7FIL333
8EDT-91105B
11FIL68304
3EDT-20821
9.3EDT-51-25-004
200EDT-51-25-010A
6EDT-91003B
200EDT-51-25-010A
10FIL65821
4.1EDT-91201
9.1FIL65820
23FIL98963
100EDT-51-25-043
23FIL98963
LOAD IN ASFIL64243
Parts ListTITLEPART NUMBERQTYITEM
3" TRICLOVER CLAMPEDT-9120011
HOSE CLAMP 11/16 - 1.5"EDT-2082123
24L GEAR ACETRON GP NATURALFIL7475524
TRICLOVER SEAL 3" BUNAEDT-91004B15
POLYPACK U CUP BUNAEDT-91003B16TRICLOVER SEAL 1 1/2" BUNA NEDT-91105B28
1" DIA FERRULE FITTINGFIL6830429
2" TRICLOVER CLAMPEDT-91201110
SHAFT BUSHING SHORTEDT-51-25-010A3200
Parts ListTITLEPART NUMBERQTYITEM
SHAFT BUSHING LONGEDT-51-25-010B1201
BUSHING HOLDER INSERTEDT-51-25-00422.1
ENGRAVED CURVED END PLATEEDT-51-25-00612.2
IDLER SHAFT (24L)EDT-51-25-01812.3
DRIVE SHAFT (24L)EDT-51-25-01912.4
POMP BODY (24L)EDT-51-25-02112.5
GEAR CHAMBER (24L)EDT-51-25-02312.6
TRICLOVER 1 1/2" CLAMPFIL33327.1
FERREULE 0.812"OD FOR POMP AND NOZZLE BODYFIL6582027.2
THIS DOCUMENT IS THE EXCLUSIVE PROPERTY OF DL-TECH INC. AND MAY NOT BE USED OR REPRODUCED, NOR ITS CONTENT OR PART THERE OF BE DISCUSSED TO OTHER BY ANY PERSON OR COMPANY WITHOUT THE EXPRESS CONSENT IN WRITING FROM DL-TECH INC.
DRAWN BY: CHECKED BY: MATERIAL:
MAT'L TREATMENT:188 ONEIDA DRIVE TEL: (514) 694-3439POINTE CLAIRE , QUEBEC FAX: (514) 694-4107CANADA H9R 1A8 EMAIL: [email protected]
TITLE:
MACHINE:
DECIMALS / DECIMAUX: .xx .01DECIMALS / DECIMAUX: .xxx .002FRACTIONS / FRACTIONS: 1/32ANGULAR / ANGULAIRE: 0.5BREAK ALL SHARP EDGES / BRISER TOUTES LES ARRETES
DWG NO: REV:MAT'L #:
DATE: SHEET:OF
QTY / MACHINE: Alex 20/04/2007
24LT PUMPASS'Y WITH 1 1/2" SANITARY FITTINGS
ASFIL63820 1
1 1
6EDT-91003B
7.1FIL333
2.5EDT-51-25-021
7.1FIL333
8EDT-91105B
9FIL68304
2.2EDT-51-25-006
5EDT-91004B
2.1EDT-51-25-004
200EDT-51-25-010A
2.3EDT-51-25-018
4FIL74755
200EDT-51-25-010A
4FIL74755
2.6EDT-51-25-023
2.1EDT-51-25-004 201
EDT-51-25-010B
200EDT-51-25-010A
3EDT-20821
3EDT-20821
1EDT-91200
9FIL68304
10EDT-91201
2.4EDT-51-25-019
7.2FIL65820
THIS DOCUMENT IS THE EXCLUSIVE PROPERTY OF DL-TECH INC. AND MAY NOT BE USED OR REPRODUCED, NOR ITS CONTENT OR PART THERE OF BE DISCUSSED TO OTHER BY ANY PERSON OR COMPANY WITHOUT THE EXPRESS CONSENT IN WRITING FROM DL-TECH INC.
DRAWN BY: CHECKED BY: MATERIAL:
MAT'L TREATMENT:188 ONEIDA DRIVE TEL: (514) 694-3439POINTE CLAIRE , QUEBEC FAX: (514) 694-4107CANADA H9R 1A8 EMAIL: [email protected]
TITLE:
MACHINE:
DECIMALS / DECIMAUX: .xx ± .01DECIMALS / DECIMAUX: .xxx ± .002FRACTIONS / FRACTIONS: ± 1/32ANGULAR / ANGULAIRE: ± 0.5°BREAK ALL SHARP EDGES / BRISER TOUTES LES ARRETES
DWG NO: REV:
MAT'L #:
DATE: SHEET:OF
QTY / MACHINE: Robin 22/05/2008
ITSO STEM & SPOUT KIT TABLE
Z:\AESUS DRAWINGS (MASTERS)\ASSEMBLY\ASFIL67097.iam
1 1
REV # ECN # DESCRIPTION DATE INIT
ITSO STEM AND SPOUT LISTNOZZLE SIZE SPOUT #1/8" EDT-51-25-0573/16" EDT-51-25-0581/4" EDT-51-25-0595/16" EDT-51-25-0603/8" EDT-51-25-061
SPOUT (SEE TABLE)
EDT-51-25-056 (STEM)
EDT-91101B (ORING)
BOU9102 (SOC. SET SCREW)
EDT-91102B (ORING)
EDT-51-25-064 (INSERT)
THIS DOCUMENT IS THE EXCLUSIVE PROPERTY OF DL-TECH INC. AND MAY NOT BE USED OR REPRODUCED, NOR ITS CONTENT OR PART THERE OF BE DISCUSSED TO OTHER BY ANY PERSON OR COMPANY WITHOUT THE EXPRESS CONSENT IN WRITING FROM DL-TECH INC.
DRAWN BY: CHECKED BY: MATERIAL:
MAT'L TREATMENT:188 ONEIDA DRIVE TEL: (514) 694-3439POINTE CLAIRE , QUEBEC FAX: (514) 694-4107CANADA H9R 1A8 EMAIL: [email protected]
TITLE:
MACHINE:
DECIMALS / DECIMAUX: .xx ± .01DECIMALS / DECIMAUX: .xxx ± .002FRACTIONS / FRACTIONS: ± 1/32ANGULAR / ANGULAIRE: ± 0.5°BREAK ALL SHARP EDGES / BRISER TOUTES LES ARRETES
DWG NO: REV:
MAT'L #:
DATE: SHEET:OF
QTY / MACHINE: Robin 22/05/2008
IBSO STEM & SPOUT KIT TABLE
Z:\AESUS DRAWINGS (MASTERS)\ASSEMBLY\ASFIL67095.iam
1 1
REV # ECN # DESCRIPTION DATE INIT
BOU9102 (SOC. SET SCREW)
EDT-91102B (ORING)
STEM END ORING (SEE TABLE)
SPOUT & STEM ASS'Y (SEE TABLE)
SPOUT & STEM ASS'Y
ASFIL64521ASFIL64522ASFIL64523ASFIL64524ASFIL64525ASFIL64526
Assembly #IBSO STEM AND SPOUT LIST
NOZZLE SIZE SPOUT & STEM STEM END ORING#3/8" FIL66669 EDT-91110B7/16" FIL67063 EDT-91111B1/2" FIL66670 EDT-91112B5/8" FIL66671 EDT-91103B3/4" FIL66672 EDT-91114B7/8" FIL67064 EDT-91106B1"
Samantha
Text Box
EDT-51-25-029
Samantha
Text Box
EDT-51-25-038
Samantha
Text Box
EDT-51-25-036
Samantha
Text Box
EDT-51-25-034
Samantha
Text Box
EDT-51-25-032
Samantha
Text Box
EDT-51-25-030
Samantha
Text Box
EDT-51-25-039
Samantha
Text Box
EDT-51-25-037
Samantha
Text Box
EDT-51-25-035
Samantha
Text Box
EDT-51-25-033
Samantha
Text Box
EDT-51-25-031
Samantha
Text Box
EDT-51-25-028
Samantha
Rectangle
Samantha
Text Box
STEM
Samantha
Text Box
SPOUT
Samantha
Rectangle
Samantha
Rectangle
Samantha
Rectangle
Samantha
Rectangle
Samantha
Rectangle
Samantha
Rectangle
Samantha
Rectangle
THIS DOCUMENT IS THE EXCLUSIVE PROPERTY OF DL-TECH INC. AND MAY NOT BE USED OR REPRODUCED, NOR ITS CONTENT OR PART THERE OF BE DISCUSSED TO OTHER BY ANY PERSON OR COMPANY WITHOUT THE EXPRESS CONSENT IN WRITING FROM DL-TECH INC.
DRAWN BY: CHECKED BY: MATERIAL:
MAT'L TREATMENT:188 ONEIDA DRIVE TEL: (514) 694-3439POINTE CLAIRE , QUEBEC FAX: (514) 694-4107CANADA H9R 1A8 EMAIL: [email protected]
TITLE:
MACHINE:
DECIMALS / DECIMAUX: .xx ± .01DECIMALS / DECIMAUX: .xxx ± .002FRACTIONS / FRACTIONS: ± 1/32ANGULAR / ANGULAIRE: ± 0.5°BREAK ALL SHARP EDGES / BRISER TOUTES LES ARRETES
DWG NO: REV:
MAT'L #:
DATE: SHEET:OF
QTY / MACHINE: Robin 22/05/2008
OBSO STEM & SPOUT KIT TABLE
Z:\AESUS DRAWINGS (MASTERS)\ASSEMBLY\ASFIL67096.iam
1 1
REV # ECN # DESCRIPTION DATE INIT
OBSO STEM AND SPOUT LISTNOZZLE SIZE STEM # SPOUT # STEM END ORING #3/8" EDT-51-25-045 EDT-51-25-044 EDT-91112B7/16" EDT-51-25-047 EDT-51-25-046 EDT-91103B1/2" EDT-51-25-049 EDT-51-25-048 EDT-91114B5/8" EDT-51-25-051 EDT-51-25-050 3/4" EDT-51-25-053 EDT-51-25-052 EDT-91116B7/8" EDT-51-25-211 EDT-51-25-212 EDT-91117B1"
STEM END ORING (SEE TABLE)
STEM (SEE TABLE)
SPOUT (SEE TABLE)
EDT-91102B (ORING)
BOU9102 (SOC. SET SCREW)
EDT-91101B (ORING)
