62

®

The 411 Series is available in 2-way and 3-way constructions,

designed to control the flow of air and inert gases. The valves are

suitable for a wide range of OEM applications where small size, low

power, and long life are critical.

•Cycle life in the hundreds of millions

•Corrosion resistant materials of construction

•Manifold mount construction allows for easy assembly

•Lower power consumption offers extended battery life

Construction

2NC1

3

2

3NC1

2

Electrical

Valve

Valve Wetted Parts

Body PBT

Gaskets FKM, NBR, EPDM

Bobbin/Core Tube PBT

Core and Plugnut 400 Series Stainless Steel

Springs 300 Series Stainless Steel

Standard Voltages 5 VDC, 6 VDC, 12 VDC, 24 VDC

Power Consumption 0.65, 2.0 Watts

Duty Cycle Rating Continuous

Coil Insulation 266˚F (130˚C)

Electrical Connection .110" Spade, 24 AWG Hardwire

Response Time ~ 10 ms

Internal Volume (Max.) Line Mount = 620µl Manifold Mount = 564µl

Vacuum Rating 29" Hg

OptionsOxygen clean available300 Series Stainless Steel Body

1

3

3

2

1

2

3

2NC

2NO3U

Alternate Construction/Options Additional constructions and options are available including alternate elastomers and orifice sizes. Minimum quantities apply.

Temperature Range: Ambient & Media: -10˚F to 140˚F (-23˚C to 60˚C)

Approvals: Meets applicable CE directives.UL Recognized*CSA Certified*

* Stainless Steel Body Option Only

2/23/2SERIES411

2 and 3-Way Miniature Solenoid ValvesGeneral Service • Manifold & Line Mount

1

1

3

22

ASCO products offered by O’Keefe Controls Co. • Phone (203) 261-6711 • www.okcautomation.com

ASCO products offered by O’Keefe Controls Co. • Phone (203) 261-6711 • www.okcautomation.com 63

®

2/23/2

SERIES411

Specifications

Orifice Size Cv Flow Factor (1)

Operating Pressure (psi)

Catalog NumberPower (Watts)

Weight (oz)Vac (in Hg) Max.

2/2NC - Normally Closed

0.030 .013 29 100 411x11xxxx 0.65 1.6

0.055 .038 29 100 411x21xxxx 2.0 1.6

0.080 .070 29 30 411x31xxxx 2.0 1.6

3/2NC - Normally Closed

0.030 / .025 .013 / .008 29 100 411x12xxxx 0.65 1.6

0.055 / .050 .038 / .033 29 100 411x22xxxx 2.0 1.6

0.08 / .050 .070 / .033 29 30 411x32xxxx 2.0 1.6

3/2U - Universal Operation

0.030 / .025 .013 / .008 29 100 411x13xxHx 0.65 1.6

0.055 / .050 .038 / .033 29 50 411x23xxHx 2.0 1.6

0.08 / .050 .070 / .033 29 30 411x33xxHx 2.0 1.6

(1) Cv Flow Factors are nominal

To Construct Catalog Number

- Select catalog numbers

- Insert mounting style into 4th digit

- Insert voltage into 7th & 8th digits

- Insert electrical connection into 9th digit

- Insert seal material into 10th digit

- Insert option code into 11th digit (if more than one option code, put in alphabetical order)

Note: Oxygen Service valves available with FKM or EPDM Seals only

3-Way Universal operation only available with hardwire electrical connection (H)

Examples

411M1124FV = 2-way normally closed manifold mount valve with 0.030 orifice, 24 VDC coil rating at 0.65 Watts, .110 spade connection, FKM seals

411L3212HV = 3-way normally closed line mount valve with 0.080 orifice, 12 VDC coil rating at 2.0 Watts, hard wire coil, FKM seals

411K1124HVOS = 2-way normally closed manifold mount and M5 stud with 0.030 orifice, 24 VDC coil rating at 0.65 watts, hardwire coil, FKM seals,

clean for Oxygen use and Stainless Steel body

Catalog Number Description and Options

411 x 11 xx x x x

Catalog Number

Mounting Style M = Manifold, #10-32 UNF L = Line, #10-32 UNF K = Manifold, M5 J = Line, M5

Catalog Number

Voltage05 = 5 VDC06 = 6 VDC12 = 12 VDC24 = 24 VDC

Electrical Connection F = .110 Spade H = Hardwire

Sealing Material V = FKM E = EPDM B = NBR

Option Suffix O = Oxygen Service P = Label Pressure units in kPa S = Stainless Steel Body

64

®

Dimensions: - 2 and 3-Way Manifold Mount Solenoid: Inches (mm)

Dimensions: - 2 and 3-Way Line Mount Solenoid: Inches (mm)

2/23/2SERIES411

.110 X .020SPADE CONNECTORS

(FOR LEADWIRE OPTION SEELINE MOUNT DIAGRAM BELOW)

.110 X .020

LEADWIRE 15.0 (381) LONG24 AWG PTFE COATED

(FOR SPADE CONNECTOR OPTION SEEMANIFOLD MOUNT DIAGRAM ABOVE)

LEADWIRE 15.0 (381) LONG24 AWG PTFE COATED

(FOR SPADE CONNECTOR OPTION SEEMANIFOLD MOUNT DIAGRAM ABOVE)

#10-32 UNF(M5 METRIC OPTION)

PORT 2 (IF APPLICABLE)

#10-32 UNF(M5 METRIC OPTION)

PORT 3 (IF APPLICABLE)

#10-32 UNF(M5 METRIC OPTION)

PORT 2

#10-32 UNF(M5 METRIC OPTION)

PORT 1

#10-32 UNF(M5 METRIC OPTION)

PORT 1

#10-32 UNF(M5 METRIC OPTION)

PORT 2

SPADE CONNECTORS(FOR LEADWIRE OPTION SEE

LINE MOUNT DIAGRAM BELOW)

#10-32 UNF(M5 METRIC OPTION)

PORT 3 (IF APPLICABLE)

#10-32 UNF(M5 METRIC OPTION)

PORT 3 (IF APPLICABLE)

#10-32 UNFMOUNTING STUDPORT 1

#10-32 UNFMOUNTING STUDPORT 1

4X SLOTS

3X Ø.125 (3.18)SPANNER HOLES

PORT 2

Ø.75(19.1)

Ø.75

.69(17.5)

.69(17.5)

3X Ø.063SPACING 120ºPORT 2

2X Ø.100 x .35 DEEPMOUNTING HOLESFOR #4 SELF TAPPINGSCEW

2X #6-32 UNC.22 (5.6) FULL THREADMOUNTING HOLES(M3 METRIC OPTION)

1.94(49.3) 1.54

(39.2)

1.68(42.7)

1.68(42.7)

(19.1)

Ø.75(19.1)

Ø.75(19.1)

1.83(46.6)

.156(3.96)

.156

.193(4.90)

.193(4.90)

.375(9.53)

.375(9.53)

(3.96).156(3.96)

1.43(36.4)

PBT Body

PBT Body

Stainless Steel Body

Stainless Steel Body

ASCO products offered by O’Keefe Controls Co. • Phone (203) 261-6711 • www.okcautomation.com