As NZS 4223.1-1994 Information Technology - International Standardized Profile FOD11 - Open Document...

7/31/2019 As NZS 4223.1-1994 Information Technology - International Standardized Profile FOD11 - Open Document Format

1/12

AS/NZS 4223.1:1994ISO/IEC ISP 10610-1:1993

Australian/New Zealand Standard

Information technologyInternational standardized profileFOD11Open document format:Simple document structureCharacter content architecture only

Part 1: Document applicationprofile


2/12

AS/NZS 4223.1:1994

This Joint Australian/New Zealand Standard was prepared by Joint Technical

Committee IT/1, Information SystemsInterconnection. It was approved on behalf of

the Council of Standards Australia on 10 June 1994 and on behalf of the Council of

Standards New Zealand on 9 May 1994. It was published on 17 October 1994.

The following interests are represented on Committee IT/1:

Australian Bankers Association

Australian Bureau of Statistics

Australian Chamber of Commerce and Industry

Australian Committee of Directors and Principals

Australian Computer Society

Australian Computer Users Association

Australian Information Industry Association

Australian Vice Chancellors Committee

Department of Defence, Australia

Department of Industry, S cience and Technology, A ustralia

Government Computing Service, New Zealand

Information Exchange Steering Committee, AustraliaInstitute of Information and Communication Technologies, CSIRO, Australia

OPTUS Communications, Australia

Telecom Australia

Telecom New Zealand

Review of Standards. To keep abreast of progress in industry, Joint Australian/New Zealand Standards are subject to periodic review and are kept up to date by theissue of amendments or new editions as necessary. It is important therefore thatStandards users ensure that they are in possession of the latest edition, and anyamendments thereto.

Full details of all Joint Standards and related publications will be found in theStandards Australia and Standards New Zealand Catalogue of Publications; thisinformation is supplemented each month by the magazines The Australian Standardand Standards New Zealand, which subscribing members receive, and which givedetails of new publications, new editions and amendments, and of withdrawnStandards.

Suggestions for improvements to Joint Standards, addressed t o the head office of either

Standards Australia or Standards New Zealand, are welcomed. Notification of anyinaccuracy or ambiguity found in a Joint Australian/New Zealand Standard should bemade without delay in order that the matter may be investigated and appropriate actiontaken.


3/12

AS/NZS 4223.1:1994


Information technologyInternational standardized profileFOD11Open document format:Simple document structureCharacter content architecture only

Part 1: Document application profile

First published as Joint Standard AS/NZS 4223.1:1994.

PUBLISHED JOINTLY BY:

STANDARDS AUSTRALIA1 The Crescent,Homebush NSW 2140 Australia

STANDARDS NEW ZEALANDLevel 10, Radio New Zealand House,155 The Terrace,Wellington 6001 New Zealand

ISBN 0 7262 9099 8


4/12

ii

PREFACE

This Standard was prepared by the Joint Standards Australia/Standards New Zealand

Committee IT/1 on Information Systems Interconnection. It is identical with and has beenreproduced from ISO/IEC ISP 10610-1:1993, Information technology International Standardized

Profile FOD11Open Document Format: Simple document structure Character content

architecture only, Part 1: Document Application Profile (DAP).

This Standard is issued as a Joint Standard under the terms of the Active Cooperation Agreement

between Standards Australia and Standards New Zealand.

The objective of this Standard is to provide computer users with a specification of interchange

formats for the transfer of structured documents (character content only) between equipment

designed for word or document processing.

This Standard is one of a series of Open Systems Interconnection (OSI) Standards which are

currently under development. Since OSI Standards are developmental, there may be some minordifficulties encountered in their implementation. For this reason, Standards Australia will beproviding, through the OSI Help Desk, a service to coordinate and disseminate information

concerning difficulties which are identified in using this Standard.

Users of this Standard are advised by Standards Australia and Standards New Zealand, under

arrangements made with ISO and IEC, as well as certain other Standards organizations, that the

number of this Standard is not reproduced on each page; its identity is shown only on the cover andtitle pages.

For the purpose of this Standard, the source text should be modified as follows:

(a) Terminology The words this Australian/New Zealand Standard should replace the words this

International Standard wherever they appear.

(b) Decimal marker Substitute a full point for a comma where it appears as a decimal marker.

(c) References The references to international Standards should be replaced by references, whereappropriate, to the following Australian or Joint Australian/New Zealand Standards:

Refer ence to International Standard

or other publication

Australian or Joint


ISO AS

2022 Information processing ISO7-bit and 8-bit coded character

sets Code extension tech-

niques

1953 Information processing ISO7-bit and 8-bit coded character

sets Code extension tech-

niques

2375 Da ta processing Pr ocedure for

the r egistr ation of escape

sequences

6937 I n f o r m a t i o n pr o c e s s i n g

Coded character sets for textcommunication

2793 Inf orm ation processing C oded

character sets for text com-

munication

6937-2 Part 2: Latin alphabetic andnon-alphabetic graphic charac-

ters

2793.2 Part 2: Latin alphabetic and

non-alphabetic graphic charac-ters

6937-2/Add.1 Addendum 1


5/12

iii

ISO AS

8613 Information processing Textand office systemsOffice

Document Architecture (ODA)

and interchange format

3951 Information processing Texta nd of fice s ys tem s O f fice

Document Architecture (ODA)

and interchange format

8613-1 Par t 1: Intr oduction and gen-

eral principles

3951.1 Par t 1: Intr oduction and gen-

eral principles

8613-1/Add. 1 A d d e n d u m 1 : D o c u m e n tApplication Profile Proforma

and Notation

8613-2 Par t 2: D ocument structure s 3951.2 Par t 2: D ocument structure s

8613-4 Part 4: Document profile 3951.4 Part 4: Document profile

8613-5 Pa rt 5: O ff ice D ocume nt I nter-change Format (ODIF)

3951.5 Pa rt 5: O ff ice D ocume nt I nter-change Format (ODIF)

8613- 6 Pa rt 6: Char act er c ont ent a rc hi-tectures

3951. 6 Pa rt 6: Char act er c ont ent ar chi-tectures

8859 Inf ormation processing 8-bits in gl e- b yte co de d g ra ph ic

character sets

8859-1 Part 1: Latin alphabet No. 1

8879 Inf ormation processing Textand office systems Standard

Generalized Markup Language(SGML)

3514 Information processing Textand office systemsStandard

generalized markup language

(SGML)

9069 Inf orm ation pr ocess ing S GML

s u p po r t f a c i li t i e s S G M LDocument Interchange Format

(SDIF)

3649 Inf orm ation pr ocessing SG ML

support facilitiesSGML docu-

ment interchange format (SDIF)

9293 Inf ormation pr ocessing Vol-ume and f ile structur e of

flexible disk cartridges for

information interchange

3714 Data storage and transfermedia Volume and file struc-

ture of flexible disk cartridges

( dis ke tt es ) f or i nf or ma ti oninterchange

ISO/IEC

646 Information technology ISO7-bit coded character set for


1776 Inf ormation processing 7-bitco de d c ha ra ct er s et f or


7350 I n f or mat io n te ch no l og y

Registration of repertoires ofg ra ph i c c ha r a ct e r s f r o m

ISO/IEC 10367

2760 Text communication Regis-

tration of graphic charactersubrepertoires

8824 Information technology Open

S y st e m s I n te r c on n ec t io n Specification of Abstract Syntax

Notation One (ASN.1)


S y st e m s I n t er c on n ec t io n Specification of Abstract Syntax


8825 Information technology OpenS y st e m s I n te r c on n ec t io n

Specification of Basic EncodingRul es f or Ab str act S yntax



S y st e m s I n t er c on n ec t io n

Specification of basic encoding

r ules f or Abstract Syntax



6/12

iv

ISO/IEC ISP AS/NZS

11181 I n f or mat io n t e ch no l og y I n te r na t io n al S ta n da r d iz e d

Profile FOD26 Open Docu-

ment Format: Enhanced docu-m e nt s t r uc t ur e C h a r ac te r ,

raster graphics and geometricgraphics content architectures

11181- 1 Pa rt 1: D ocume nt Ap plic ationProfile (DAP)

11182 I n f or mat io n t e ch no l og y I n te r na t io na l S ta n da r d iz e d

Profile FOD36 Open Docu-ment Format: Extended docu-

m e nt s t r uc t ur e C ha r a ct e r,

raster graphics and geometric

graphics content architectures

11182- 1 Pa rt 1: D ocume nt Ap plic ationProfile (DAP)

ISO/IEC TR

10000 I n f or mat io n t e ch no l og y Framework and taxonomy of

International Standardized Pro-

files

3966 I n f or mat io n tec h no l og y Framework and taxonomy of

International Standardized Pro-

files

10000-1 Part 1: Framework 3966.1 Part 1: Framework

10000-2 Part 2: Taxonomy of OSI

Profiles

3966.2 Pa rt 2: T axonom y of pr ofiles

ITU-T Recommendations

T.400 I ntr oduction to D ocum ent

A r ch it ec tu re , T ran sf er a ndManipulation

T. 502 Document Application Profile

PM-11 | FOD11 Open Docu-ment Format: Simple document

structure Character content

architecture only

Copyright STANDARDS AUSTRALIA/STANDARDS NEW ZEALAND

Users of Standards are r eminded t hat copyright subsists in all Standards Australia and Standards New Zealand publications andsoftware. Except where the Copyright Act allows and except where provided for below no publications or software produced byStandards Australia or Standards New Zealand may be r eproduced, stored in a retrieval system in any form or transmitted by anymeans without prior permission in writing from Standards Australia or Standards New Zealand. Permission may be conditional onan appropriate royalty payment. Australian requests for permission and information on commercial software royalties should bedirected to the head office of Standards Australia. New Zealand requests should be directed to Standards New Zealand.

Up to 10 percent of the technical content pages of a Standard may be copied for use exclusively in-house by purchasers ofthe Standard without payment of a royalty or advice t o Standards Australia or Standards N ew Zealand.

Inclusion of copyright material in computer software programs is also permitted without royalty payment provided suchprograms are used exclusively in-house by the creators of the programs.

Care should be taken to ensure that material used is from the current edition of the Standard and that it is updated whenever theStandard is amended or r evised. The number and date of the Standard should t herefore be clearly i dentified.

The use of material in print form or in computer software programs to be used commercially, with or without payment, or incommercial contracts i s subject to the payment of a royalty. This policy may be varied by Standards Australia or StandardsNew Zealand at any time.


7/12

v

CONTENTS

Page

1 Scope . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1

2 Normative references . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2

2.1 Paired Recommendations International Standards equivalent in technical

content . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2

2.2 Additional references . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3

3 Definitions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4

4 Relationship with other International Standardized Profiles . . . . . . . . . . . . . . . . . . . . . . . . . 5

5 Conformance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5

5.1 Data stream conformance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5

5.2 Implementation conformance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6

6 Characteristics supported by this document application profile . . . . . . . . . . . . . . . . . . . . . . 6

6.1 Overview . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6

6.1.1 General . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6

6.1.2 Formatted form documents . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6

6.1.3 Processable form documents . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7

6.1.4 Formatted processable form documents . . . . . . . . . . . . . . . . . . . . . . . . 7

6.2 Logical characteristics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 86.2.1 Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8

6.2.2 Overview of the logical structure . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8

6.2.3 Body part of the logical structure . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8

6.2.3.1 DocumentLogicalRoot . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8

6.2.3.2 Passage . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8

6.2.3.3 BodyText . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9

6.2.4 Common content part of the logical structure . . . . . . . . . . . . . . . . . . . . . 9

6.2.4.1 CommonContent . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9

6.2.4.2 CommonText . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9

6.2.4.3 PageNumber . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9

6.3 Layout characteristics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10

6.3.1 Overview of the layout characteristics . . . . . . . . . . . . . . . . . . . . . . . . . . 10

6.3.2 DocumentLayoutRoot . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 106.3.3 PageSet . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10

6.3.4 Page characteristics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11

6.3.4.1 Page constituents . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11

6.3.4.2 Page dimensions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11

6.3.4.3 Nominal Page sizes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12

6.3.4.4 Page offset . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12

6.3.4.5 Page layout characteristics . . . . . . . . . . . . . . . . . . . . . . . . . . . 12

6.3.5 Body area characteristics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14

6.3.5.1 General characteristics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14

6.3.5.2 BasicBody . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14

6.3.6 Header and footer area characteristics . . . . . . . . . . . . . . . . . . . . . . . . . 14

6.3.6.1 General characteristics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14

6.3.6.2 BasicHeader and BasicFooter . . . . . . . . . . . . . . . . . . . . . . . . . 156.3.7 SpecificBlock . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15


8/12

vi

Page

6.4 Document layout characteristics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15

6.4.1 Flow controls . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15

6.4.1.1 Allocation of content to page sets . . . . . . . . . . . . . . . . . . . . . . 156.4.1.2 Allocation of content to page . . . . . . . . . . . . . . . . . . . . . . . . . . 15

6.4.1.2.1 New layout object . . . . . . . . . . . . . . . . . . . . . . . . . . 16

6.4.1.2.2 Indivisibi li ty . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16

6.4.1.2.3 Same layout object . . . . . . . . . . . . . . . . . . . . . . . . . 16

6.4.1.3 Allocation of content to body areas . . . . . . . . . . . . . . . . . . . . . 16

6.4.1.4 Allocation of content to header-footer areas . . . . . . . . . . . . . . . 16

6.4.1.4.1 Concatenation . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16

6.4.2 Layout of the document content . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17

6.4.2.1 Margins . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17

6.4.2.2 Separation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18

6.4.3 Layout controls applicable in the absence of a generic layout structure . . 18

6.5 Content layout and imaging characteristics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18

6.5.1 Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18

6.5.2 Character content architecture class . . . . . . . . . . . . . . . . . . . . . . . . . . . 19

6.5.3 Character repertoire . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19

6.5.4 Code extension techniques . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20

6.5.5 Line spacing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22

6.5.6 Character spacing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22

6.5.7 Character path and line progression . . . . . . . . . . . . . . . . . . . . . . . . . . . 22

6.5.8 Character orientation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22

6.5.9 Emphasis . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22

6.5.10 Tabulation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23

6.5.11 Indentation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24

6.5.12 Alignment . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24

6.5.13 First l ine format . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 246.5.14 Widow and orphan sizes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25

6.5.15 Reverse character string . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25

6.5.16 Superscripts and subscripts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25

6.5.17 Line breaks . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25

6.5.18 Substitution of characters . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26

6.5.19 Init ial point . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26

6.5.20 Use of control functions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26

6.5.21 Formatting the content . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26

6.6 Miscellaneous features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26

6.6.1 Application comments . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26

6.6.2 Alternative representation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27

6.6.3 Page numbering . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28

6.6.4 User readable comments . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 286.6.5 User visible name . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29

6.7 Document management features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29

6.7.1 Document constituent information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29

6.7.1.1 Presence of document constituents . . . . . . . . . . . . . . . . . . . . . 29

6.7.2 Document identification information . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29

6.7.2.1 Document application profile information . . . . . . . . . . . . . . . . . 30

6.7.2.2 Document architecture class information . . . . . . . . . . . . . . . . . 30

6.7.2.3 Content architecture classes information . . . . . . . . . . . . . . . . . 30

6.7.2.4 Interchange format class information . . . . . . . . . . . . . . . . . . . . 30

6.7.2.5 ODA version information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30

6.7.2.6 Document reference . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30

6.7.3 Document default information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30

6.7.4 Non-basic characteristics information . . . . . . . . . . . . . . . . . . . . . . . . . . 306.7.4.1 Profile character sets . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31

6.7.4.2 Comments character sets . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31

6.7.4.3 Alternative representation character sets . . . . . . . . . . . . . . . . . 32

6.7.5 Document management attributes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32


9/12

vii

Page

7 Specification of constituent constraints . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33

7.1 Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33

7.1.1 Diagrams of relationships of logical constituents . . . . . . . . . . . . . . . . . . 337.1.2 Diagrams of relationships of layout constituents . . . . . . . . . . . . . . . . . . . 34

7.1.3 Notation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 35

7.2 Document profile constituent constraints . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36

7.2.1 Macro definitions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36

7.2.2 Constituent constraints . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 41

7.2.2.1 DocumentProfile . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 41

7.3 Logical constituent constraints . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 44


7.3.2 Factor constraints . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 44

7.3.2.1 FACTOR ANY-LOGICAL . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 44


7.3.3.1 DocumentLogicalRoot . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 45

7.3.3.2 Passage . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 45

7.3.3.3 BodyText . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 45

7.3.3.4 CommonContent . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 46

7.3.3.5 CommonText . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 46

7.3.3.6 PageNumber . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 46

7.4 Layout constituent constraints . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 47



7.4.2.1 FACTOR ANY-COMPOSITE-LAYOUT . . . . . . . . . . . . . . . . . . . 48

7.4.2.2 FACTOR ANY-PAGE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 48

7.4.2.3 FACTOR ANY-FRAME . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 49


7.4.3.1 DocumentLayoutRoot . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 497.4.3.2 PageSet . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 50

7.4.3.3 Page . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 50

7.4.3.4 RectoPage . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 50

7.4.3.5 VersoPage . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 51

7.4.3.6 BasicHeader . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 51

7.4.3.7 BasicBody . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 51

7.4.3.8 BasicFooter . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 52

7.4.3.9 Specif icBlock . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 52

7.5 Layout style constituent constraints . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 53



7.5.2.1 FACTOR ANY-LAYOUT-STYLE . . . . . . . . . . . . . . . . . . . . . . . . 53

7.5.3 Constituent constraints . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 537.5.3.1 L-Style1 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 53

7.5.3.2 L-Style2 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 53

7.5.3.3 L-Style3 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 54

7.6 Presentation style constituent constraints . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 54


7.6.2 Factor constituent constraints . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 54

7.6.2.1 FACTOR ANY-PRESENTATION-STYLE . . . . . . . . . . . . . . . . . 54


7.6.3.1 P-Style1 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 55

7.6.3.2 P-Style2 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 55

7.6.3.3 P-Style3 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 55

7.6.3.4 P-Style4 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 55

7.7 Content portion constituent constraints . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 567.7.1 Macro definitions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 56



7.7.3.1 Character-content-portion . . . . . . . . . . . . . . . . . . . . . . . . . . . . 56


10/12

viii

Page

8 Interchange format . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 58

8.1 Interchange format class A . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 58

8.1.1 Interchange format . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 588.1.2 Document application profile object identifier . . . . . . . . . . . . . . . . . . . . . 58

8.1.3 Encoding of application comments . . . . . . . . . . . . . . . . . . . . . . . . . . . . 58

8.1.4 Data lengths . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 58

8.2 Interchange format SDIF . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 58

8.2.1 Interchange format . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 58

8.2.2 Document application profile object identifier . . . . . . . . . . . . . . . . . . . . . 59

8.2.3 Encoding of application comments . . . . . . . . . . . . . . . . . . . . . . . . . . . . 59

Annexes

A Amendments and technical corrigenda . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 60

A.1 Amendments . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 60

A.1.1 Amendments to the base standard . . . . . . . . . . . . . . . . . . . . . . . . . . . . 60

A.1.2 Proposed changes to standards due to defects . . . . . . . . . . . . . . . . . . . 60

A.2 Technical corrigenda . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 61

A.2.1 Technical corrigenda to this International Standardized Profile . . . . . . . . 61

A.3 Versions of the ODA International Standard . . . . . . . . . . . . . . . . . . . . . . . . . . . . 61

B Recommended practices . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 62

B.1 Transfer methods for ODA . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 62

B.1.1 Conveyance of ODA over CCITT X.400-1984 . . . . . . . . . . . . . . . . . . . . 62

B.1.2 Conveyance of ODA over FTAM . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 62

B.1.3 Conveyance of ODA over DTAM . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 62

B.1.4 Conveyance of ODA over flexible disks . . . . . . . . . . . . . . . . . . . . . . . . . 63

B.2 Interoperability with SGML applications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 63

List of figures

Figure 1 Page layout (portrait orientation) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13

Figure 2 Page layout (landscape orientation) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14

Figure 3 Specification of margins . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17

Figure 4 Code extension features (basic case) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21

Figure 5 Code extension features (all possible cases) . . . . . . . . . . . . . . . . . . . . . . . . . . . 21

Figure 6 The body part of the generic logical structure . . . . . . . . . . . . . . . . . . . . . . . . . . . 33

Figure 7 The common part of the generic logical structure . . . . . . . . . . . . . . . . . . . . . . . . 33

Figure 8 The layout structure - document root and page sets . . . . . . . . . . . . . . . . . . . . . . 34

Figure 9 The layout structure - page structure . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34

List of tables

Table 1 Nominal page sizes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12

Table 2 List of constituent constraint numeric identifier . . . . . . . . . . . . . . . . . . . . . . . . . . 27

Table 3 Symbols to denote shift functions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 35


11/12


12/12

This is a free preview. Purchase the entire publication at the link below:

Looking for additional Standards? Visit SAI Global Infostore

Subscribe to ourFree Newsletters about Australian Standards in Legislation; ISO, IEC, BSI and more

Do you need to Manage Standards Collections Online?

Learn about LexConnect, All Jurisdictions, Standards referenced in Australian legislation

Do you want to know when a Standard has changed?

Want to become an SAI Global Standards Sales Affiliate?

Learn about other SAI Global Services:

LOGICOM Military Parts and Supplier DatabaseMetals Infobase Database of Metal Grades, Standards and Manufacturers

Materials Infobase Database of Materials, Standards and Suppliers

Database of European Law, CELEX and Court Decisions

Need to speak with a Customer Service Representative - Contact Us

AS/NZS 4223.1:1994, Information technology -International standardized profile FOD11 - Opendocument format: Simple document structure -Character content architecture only Document

application profile
http://infostore.saiglobal.com/store?utm_source=PDF&utm_medium=Website_Infostore&utm_campaign=DocSharingSiteshttp://www.saiglobal.com/Information/Standards/Newsletters/?utm_source=PDF&utm_medium=Website_Infostore&utm_campaign=DocSharingSiteshttp://www.saiglobal.com/Information/Standards/Collections/?utm_source=PDF&utm_medium=Website_Infostore&utm_campaign=DocSharingSiteshttp://www.saiglobal.com/Information/Standards/Law/?utm_source=PDF&utm_medium=Website_Infostore&utm_campaign=DocSharingSiteshttp://www.saiglobal.com/Information/Standards/StandardsWatch/?utm_source=PDF&utm_medium=Website_Infostore&utm_campaign=DocSharingSiteshttp://www.saiglobal.com/Information/Standards/Affiliate/?utm_source=PDF&utm_medium=Website_Infostore&utm_campaign=DocSharingSiteshttp://www.saiglobal.com/Information/Standards/Databases/LOGICOM/?utm_source=PDF&utm_medium=Website_Infostore&utm_campaign=DocSharingSiteshttp://www.saiglobal.com/Information/Standards/Databases/LOGICOM/?utm_source=PDF&utm_medium=Website_Infostore&utm_campaign=DocSharingSiteshttp://www.saiglobal.com/Information/Standards/Databases/Metals/?utm_source=PDF&utm_medium=Website_Infostore&utm_campaign=DocSharingSiteshttp://www.saiglobal.com/Information/Standards/Databases/Materials/?utm_source=PDF&utm_medium=Website_Infostore&utm_campaign=DocSharingSiteshttp://www.saiglobal.com/Information/Standards/Databases/European-Law/?utm_source=PDF&utm_medium=Website_Infostore&utm_campaign=DocSharingSiteshttp://infostore.saiglobal.com/store/getpage.aspx?path=/InformationServices/shop/pages/ContactingUs.htm&utm_source=PDF&utm_medium=Website_Infostore&utm_campaign=DocSharingSiteshttp://infostore.saiglobal.com/store/Details.aspx?ProductId=378832&utm_source=PDF&utm_medium=Website_Infostore&utm_campaign=DocSharingSiteshttp://infostore.saiglobal.com/store/getpage.aspx?path=/InformationServices/shop/pages/ContactingUs.htm&utm_source=PDF&utm_medium=Website_Infostore&utm_campaign=DocSharingSiteshttp://www.saiglobal.com/Information/Standards/Databases/European-Law/?utm_source=PDF&utm_medium=Website_Infostore&utm_campaign=DocSharingSiteshttp://www.saiglobal.com/Information/Standards/Databases/Materials/?utm_source=PDF&utm_medium=Website_Infostore&utm_campaign=DocSharingSiteshttp://www.saiglobal.com/Information/Standards/Databases/Metals/?utm_source=PDF&utm_medium=Website_Infostore&utm_campaign=DocSharingSiteshttp://www.saiglobal.com/Information/Standards/Databases/LOGICOM/?utm_source=PDF&utm_medium=Website_Infostore&utm_campaign=DocSharingSiteshttp://www.saiglobal.com/Information/Standards/Affiliate/?utm_source=PDF&utm_medium=Website_Infostore&utm_campaign=DocSharingSiteshttp://www.saiglobal.com/Information/Standards/StandardsWatch/?utm_source=PDF&utm_medium=Website_Infostore&utm_campaign=DocSharingSiteshttp://www.saiglobal.com/Information/Standards/Law/?utm_source=PDF&utm_medium=Website_Infostore&utm_campaign=DocSharingSiteshttp://www.saiglobal.com/Information/Standards/Collections/?utm_source=PDF&utm_medium=Website_Infostore&utm_campaign=DocSharingSiteshttp://www.saiglobal.com/Information/Standards/Newsletters/?utm_source=PDF&utm_medium=Website_Infostore&utm_campaign=DocSharingSiteshttp://infostore.saiglobal.com/store?utm_source=PDF&utm_medium=Website_Infostore&utm_campaign=DocSharingSites

As NZS 4223.1-1994 Information Technology - International Standardized Profile FOD11 - Open Document...

Documents

Transcript of As NZS 4223.1-1994 Information Technology - International Standardized Profile FOD11 - Open Document...